- observium - lists.observium.org

How to add a custom alert or web site health check in Observium
by David Gietka - NOAA Federal 03 Mar '16

03 Mar '16

Greetings, My office recently purchased Observium and we really enjoy the server stats on CPU, memory and storage. It appears that I can set up other health checks as well but I was not able to find any examples in the HTML help files. What I would like to do is write a simple shell script that returns one of three values: information, warning, and critical and have Observium act on that value with an alert (on warnings and critical error codes). Does anyone have a brief example they can share? Any assistance would be greatly appreciated. Thanks a lot. Regards, David Gietka NGS Webmaster

1 0

Problem with rrdtool graphs
by Idriss SOIDIKI 02 Mar '16

02 Mar '16

Hello, I installed Observium with the new version and I meet a problem with the creation of the graphs. Nevertheless when I launch the poller he seems to work correctly. Did you meet similar problems? Cordially --

2 2

IPMI fan speed as percent
by Louis Bailleul 02 Mar '16

02 Mar '16

Hi all, I have some devices for which the fan speed reported over IPMI is in percent. As the current ipmi_unit is “RPM” they were ignored. Thinking that it could be an easy tweak I just added a definition for percent in includes/definitions/sensors.inc.php $config['ipmi_unit']['percent'] = 'fanspeed'; This makes the detection and polling work but the graphs are messed up as they expect RPMs (kind of make sense eh). I believe that the fan sensors code is not designed to accommodate different units. So I come for advice on how to tackle this one. Is there a sensors that already work with percent ? Below is the output of the ipmi sensors. Yes it shit, and you need to thanks HP for that (especially things like the temperature limit for CPU or reporting the nominal Wattage of a PSU instead of the power consumption …) UID Light | 0x0 | discrete | 0x0180| na | na | na | na | na | na Sys. Health LED | 0x0 | discrete | 0x0180| na | na | na | na | na | na 01-Front Ambient | 24.000 | degrees C | ok | na | na | na | na | 42.000 | 46.000 02-CPU 1 | 59.000 | degrees C | ok | na | na | na | na | -116.000 | na 03-CPU 2 | 53.000 | degrees C | ok | na | na | na | na | -116.000 | na 04-P1 DIMM 1-4 | 64.000 | degrees C | ok | na | na | na | na | 87.000 | na 05-P1 DIMM 5-8 | 69.000 | degrees C | ok | na | na | na | na | 87.000 | na 06-P2 DIMM 1-4 | 58.000 | degrees C | ok | na | na | na | na | 87.000 | na 07-P2 DIMM 5-8 | 57.000 | degrees C | ok | na | na | na | na | 87.000 | na 08-HD Max | na | | na | na | na | na | na | 60.000 | na 09-HD Zone | 24.000 | degrees C | ok | na | na | na | na | 80.000 | na 10-Chipset | 81.000 | degrees C | ok | na | na | na | na | 105.000 | na 11-VR P1 | 80.000 | degrees C | ok | na | na | na | na | 115.000 | 120.000 12-VR P2 | 55.000 | degrees C | ok | na | na | na | na | 115.000 | 120.000 13-VR P1 MEM1 | 66.000 | degrees C | ok | na | na | na | na | 115.000 | 120.000 14-VR P1 MEM2 | 71.000 | degrees C | ok | na | na | na | na | 115.000 | 120.000 15-VR P2 Mem1 | 43.000 | degrees C | ok | na | na | na | na | 115.000 | 120.000 16-VR P2 Mem2 | 69.000 | degrees C | ok | na | na | na | na | 115.000 | 120.000 17-LOM | na | | na | na | na | na | na | 100.000 | na 18-PCI 1 | na | | na | na | na | na | na | 100.000 | na 19-PCI 2 | na | | na | na | na | na | na | 100.000 | na 20-PCI 3 | na | | na | na | na | na | na | 100.000 | na 21-LOM Card | na | | na | na | na | na | na | 100.000 | na 22-PCI 1 Zone | 59.000 | degrees C | ok | na | na | na | na | 70.000 | 75.000 23-LOM Zone | 72.000 | degrees C | ok | na | na | na | na | 75.000 | 80.000 24-Battery Zone | 65.000 | degrees C | ok | na | na | na | na | 75.000 | 80.000 25-PSU Intake | 40.000 | degrees C | ok | na | na | na | na | 80.000 | 85.000 26-Sys Exhaust | 64.000 | degrees C | ok | na | na | na | na | 80.000 | 85.000 Fan 1 | 67.816 | percent | ok | na | na | na | na | na | na Fan 2 | 67.816 | percent | ok | na | na | na | na | na | na Power Supply 1 | 1275 | Watts | ok | na | na | na | na | na | na Power Supply 2 | 1275 | Watts | ok | na | na | na | na | na | na Memory | 0x0 | discrete | 0x4080| na | na | na | na | na | na Best regards, Louis [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/PGS_LOGO_RGB_42x53px.jpg]<http://www.pgs.com> Louis Bailleul Computer Systems Engineer Imaging & Engineering | Imaging Telephone: +44 1932 376000 Direct: +44 1932 376842 VOIP: 74416842 Mobile: +44 7786 525307 Email: louis.bailleul(a)pgs.com<mailto:Louis.Bailleul@pgs.com> A Clearer Image | www.pgs.com<http://www.pgs.com> [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/150731-ColourWave-660x14…] Address: 4 The Heights, Brooklands, Weybridge, Surrey, KT13 0NY, United Kingdom This e-mail, including any attachments and response string, may contain proprietary information which is confidential and may be legally privileged. It is for the intended recipient only. If you are not the intended recipient or transmission error has misdirected this e-mail, please notify the author by return e-mail and delete this message and any attachment immediately. If you are not the intended recipient you must not use, disclose, distribute, forward, copy, print or rely on this e-mail in any way except as permitted by the author.

2 6

Problem with rrdtool graphs
by Idriss SOIDIKI 01 Mar '16

01 Mar '16

Hello, i run commands observium]# ./discovery.php -h all observium]# ./poller.php -h all I did not go up the information and my graphs are not displayed. What I can do ? --

2 1

big db.log
by Jose Colin 29 Feb '16

29 Feb '16

Hello Guys Recently i report that i had a lot of php processes running on the server and this consume the whole resources of the server so i checked the logs and notice that i have a 3.5 GB db.log file and in there is the next info: t row 1), Query: INSERT INTO `sensors-state` (`sensor_id`,`sensor_value`,`sensor_event`,`sensor_status`,`sensor_last_change`,`sensor_polled`) VALUES ('278','70','ok','','','1456155044') [2016/02/22 15:30:45 +0000] poller.php(9150): Failed dbQuery (#1364 - Field 'ifInUcastPkts_delta' doesn't have a default value), Query: INSERT INTO `ports-state` (`poll_time`,`poll_period`,`ifInOctets`,`ifOutOctets`,`ifInErrors`,`ifOutErrors`,`ifInUcastPkts`,`ifOutUcastPkts`,`ifInOctets_perc`,`ifOutOctets_perc`,`ifOctets_rate`,`ifUcastPkts_rate`,`ifErrors_rate`,`port_id`) VALUES ('1456155045','1456155045','15446864133','15446864133','0','0','66588490','66588490','0','0','0','0','0','524') [2016/02/22 15:30:45 +0000] poller.php(9150): Failed dbQuery (#1364 - Field 'ifInUcastPkts_delta' doesn't have a default value), Query: INSERT INTO `ports-state` (`poll_time`,`poll_period`,`ifInOctets`,`ifOutOctets`,`ifInErrors`,`ifOutErrors`,`ifInUcastPkts`,`ifOutUcastPkts`,`ifInOctets_perc`,`ifOutOctets_perc`,`ifOctets_rate`,`ifUcastPkts_rate`,`ifErrors_rate`,`port_id`) VALUES ('1456155045','1456155045','64446811076','175584922424','0','0','339891989','309672599','0','0','0','0','0','525') [2016/02/22 15:30:46 +0000] poller.php(6813): Failed dbQuery (#1364 - Field 'mempool_polled' doesn't have a default value), Query: INSERT INTO `mempools-state` (`mempool_id`) VALUES ('91') [2016/02/22 15:30:46 +0000] poller.php(6813): Failed dbQuery (#1364 - Field 'mempool_polled' doesn't have a default value), Query: INSERT INTO `mempools-state` (`mempool_id`) VALUES ('92') [2016/02/22 15:30:46 +0000] poller.php(6813): Failed dbQuery (#1364 - Field 'mempool_polled' doesn't have a default value), Query: this is the reason why i have many poller pids on the server. please can you guide to fix this issue?. thanks in advice. José.

2 2

Device showing interface error cleared long ago
by KA PDE 29 Feb '16

29 Feb '16

Hi, I have a device which is always showing an interface error which was previous to the Observium installation. I cleared the error on the switch and it did not reproduce. However Observium is showing it every day I check. I've tried to delete the device and adding it back and it show the error again. After upgrading to the latests CE it is the same. Maybe this has persisted in the DB, I don't know... Does anyone has any hint for this behaviour? Thanks in advance and best regards, Pau

1 0

Port Customer/Transit/peering
by chott＠praha1.net 28 Feb '16

28 Feb '16

Hello team, we are try set Description of port for recognize usage of port like this notes http://observium.org/w/Interface_Description_Parsing We have lot of port description starting "cust" and "transit" but Observium every time after go to Ports/Customers write "None found." Thank you for help Tom [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 733 123 135 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

5 11

DOM optic sensor graphs always rounded to 0W
by Sandy Breeze 26 Feb '16

26 Feb '16

Hi, Currently running: 0.16.1.7533 (26th January 2016) We’ve noticed the DOM optic power sensor data to be graphed at 0W all the time. Noticing the ‘value’ figure is correct on the optic’s power status page, we subsequently found all data in the RRD to be correct. eg:  <row><v>6.1840000000e-04</v></row>  <row><v>6.1300000000e-04</v></row>  <row><v>6.1435000000e-04</v></row> It just seems the rrdtool graph function is not rendering this sensor data with anything useful. The graph is being generated with something like this: rrdtool graph /tmp/FLjPO7rtfRJQOfGn.png -Y --lower-limit 0 --alt-autoscale-max --start 1456347228 --end 1456433628 --width 1152 --height 300 -c BACK#EEEEEE00 -c SHADEA#EEEEEE00 -c SHADEB#EEEEEE00 -c FONT#000000 -c CANVAS#FFFFFF00 -c GRID#a5a5a5 -c MGRID#FF9999 -c FRAME#5e5e5e -c ARROW#5e5e5e -R normal --font LEGEND:8:'DroidSansMono,DejaVuSansMono' --font AXIS:7:'DroidSansMono,DejaVuSansMono' --font-render-mode normal -E -A COMMENT:' Last Max\n' DEF:sensor=/srv/www/iss/observium/rrd/t40-ar14/sensor-power-cisco-entity-sensor-58513400.rrd:sensor:AVERAGE DEF:sensor_max=/srv/www/iss/observium/rrd/t40-ar14/sensor-power-cisco-entity-sensor-58513400.rrd:sensor:MAX DEF:sensor_min=/srv/www/iss/observium/rrd/t40-ar14/sensor-power-cisco-entity-sensor-58513400.rrd:sensor:MIN AREA:sensor_max#c5c5c5 AREA:sensor_min#ffffffff LINE1.5:sensor#cc0000:'Transceiver Rx Power -' GPRINT:sensor:LAST:%6.2lfW GPRINT:sensor:MAX:%6.2lfW\\l HRULE:0.0009585#999999::dashes Seeing the data collected is in the order of 10^-4 d.p. small, how can we stop this being rounded to 0 all the time on a the graph? I understand completely this is rrdtool not automatically choosing a very good scale for you, but is there any way to detect these low values and fix them up for the graphs by order of 1000 say? Cheers Sandy

4 6

Subscription Graphs Issue/API
by Josh Hopper 26 Feb '16

26 Feb '16

Well, my graphs do not work. Trying to figure out where I went wrong so I do not have to reinstall from scratch. Any assistance, is highly appreciated. I see this: [image: Inline image 1] Its the same for every device. I'm on Observium 0.16.2.7629 (stable). I thought it might be my config.php so I posted it below. root@svr-observium:/opt/observium# cat config.php <?php ## Check http://www.observium.org/docs/config_options/ for documentation of possible settings // Database config --- This MUST be configured $config['db_extension'] = 'mysqli'; $config['db_host'] = 'localhost'; $config['db_user'] = 'observium'; $config['db_pass'] = 'XXXXXXXX'; $config['db_name'] = 'observium'; // Base directory #$config['install_dir'] = "/opt/observium"; // Default community list to use when adding/discovering $config['snmp']['community'] = array("public"); // Authentication Model $config['auth_mechanism'] = "mysql"; // default, other options: ldap, http-auth, please see documentation for config help // Enable alerter (not available in CE) // $config['poller-wrapper']['alerter'] = TRUE; // Set up a default alerter (email to a single address) $config['email']['default'] = "user@your-domain"; $config['email']['from'] = "Observium <observium@your-domain>"; $config['email']['default_only'] = TRUE; // End config.php ?>

2 2

Creating group with ifInOctets_perc
by Louis Bailleul 26 Feb '16

26 Feb '16

Hi, Seems that I can’t create a group that uses ifInOctets_perc for its entity match ? Is this because of a reason/bug or I am doing it stupidly ? My alert checker is working fine and I was able to create a group with ifOperStatus. They are both in the Mettrics category so I expected them to work the same way. [cid:image001.png@01D170AF.C90F8400] [cid:image002.png@01D170AF.C90F8400] Best regards, Louis [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/PGS_LOGO_RGB_42x53px.jpg]<http://www.pgs.com> Louis Bailleul Computer Systems Engineer Imaging & Engineering | Imaging Telephone: +44 1932 376000 Direct: +44 1932 376842 VOIP: 74416842 Mobile: +44 7786 525307 Email: louis.bailleul(a)pgs.com<mailto:Louis.Bailleul@pgs.com> A Clearer Image | www.pgs.com<http://www.pgs.com> [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/150731-ColourWave-660x14…] Address: 4 The Heights, Brooklands, Weybridge, Surrey, KT13 0NY, United Kingdom This e-mail, including any attachments and response string, may contain proprietary information which is confidential and may be legally privileged. It is for the intended recipient only. If you are not the intended recipient or transmission error has misdirected this e-mail, please notify the author by return e-mail and delete this message and any attachment immediately. If you are not the intended recipient you must not use, disclose, distribute, forward, copy, print or rely on this e-mail in any way except as permitted by the author.

2 2

Panasas support
by Louis Bailleul 26 Feb '16

26 Feb '16

Hi, I have a few Panasas devices that (not surprisingly) Observium doesn’t handle very well. It basically only get the uptime out of it. The devices are similar to this : http://www.panasas.com/products/activestor-16-18 I have attached debug discovery, poller and snmpwalk of the top tree and enterprise parts. I also have attached the mibs from the device (retrieved from the device itself) and a logo (retrieved from http://www.panasas.com/news/press-room ) It looks like there is very little in the standard places and every interesting thing has been shoved into the enterprise tree. Do you think it is possible to add support for these devices ? Best regards, Louis [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/PGS_LOGO_RGB_42x53px.jpg]<http://www.pgs.com> Louis Bailleul Computer Systems Engineer Imaging & Engineering | Imaging Telephone: +44 1932 376000 Direct: +44 1932 376842 VOIP: 74416842 Mobile: +44 7786 525307 Email: louis.bailleul(a)pgs.com<mailto:Louis.Bailleul@pgs.com> A Clearer Image | www.pgs.com<http://www.pgs.com> [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/150731-ColourWave-660x14…] Address: 4 The Heights, Brooklands, Weybridge, Surrey, KT13 0NY, United Kingdom This e-mail, including any attachments and response string, may contain proprietary information which is confidential and may be legally privileged. It is for the intended recipient only. If you are not the intended recipient or transmission error has misdirected this e-mail, please notify the author by return e-mail and delete this message and any attachment immediately. If you are not the intended recipient you must not use, disclose, distribute, forward, copy, print or rely on this e-mail in any way except as permitted by the author.

2 2

observium-rancid mail configuration
by Sathish.I 26 Feb '16

26 Feb '16

Hi All, I am very new to observium, I have successfully integrated rancid with Observium, taking backup ups. However, I am unable to receive the mail when backup was tacken. Can anyone share the config template to integrate rancid and mail configuration for rancid. Thanks in advance. Regards, Sathish Ippani NSE Team CtrlS is India's First and Asia's largest Tier 4 Datacenter operating across India, USA, and UAE Follow us on <https://www.linkedin.com/company/ctrls-datacenters-ltd> Description: Description: Description: Description: Description: Description: http://www.ctrls.com/email-signature/images/linkedin.jpg <https://twitter.com/CtrlSDC> Description: Description: Description: Description: Description: Description: http://www.ctrls.com/email-signature/images/twitter.jpg <https://www.facebook.com/CtrlSDatacenters> Description: Description: Description: Description: Description: Description: http://www.ctrls.com/email-signature/images/facebook.jpg Description: Description: Description: Description: Description: Description: http://www.ctrls.com/email-signature/images/devider.jpg Description: Description: Description: Description: Description: Description: Ctrls Description: Description: Description: Description: Description: Description: http://www.ctrls.com/email-signature/images/devider.jpg CtrlS Datacenters Ltd 16,Software Units Layout, Madapur (HitechCity), Hyderabad 500081, Telangana, India Mob: +91 9515600544 Tel : +91 (40) 420430700 Fax : +91 (40) 23116055

2 1

Filtering ports/devices
by Michael 26 Feb '16

26 Feb '16

Does anybody know of a syntax that will allow multiple matches when filtering on device hostnames? I'm specifically on the all ports page. We've smashed two separate networks together and there are different naming conventions in use. When I want to look at only one side of the network, it would be easy if I could match all devices starting with p, s or m-. The hostname field doesn't seem to accept regex, nor does it accept "or" statements. Is there a solution to this? Cheers, Michael

1 0

Alerts based on RRD averages?
by Stephen Fulton 25 Feb '16

25 Feb '16

Hi all, I'm curious if it is possible to create an alert that considers an RRD average? For example, if I want to generate an alert that looks at the average utilization of a port over a 24 hour period, and if the average bit rate or percentage is greater than X, send an alert? I have been working with alerts that trigger based on a percentage, but if the port drops below that mark for even a short period of time (minutes, perhaps even an hour or two), the clock resets. That's proving troublesome. Any suggestions? Thanks, -- Stephen

2 1

HP mfp m527 and mfp m577 printers
by Richard Kuhns 25 Feb '16

25 Feb '16

Greetings, We've just purchased both of these printers. I've started monitoring them with Observium, but all I see under Inventory are the printer itself (hrDevicePrinter) and the printer's hard disk (hrDeviceDiskStorage). Have I missed doing something, or are these printers just not supported? This is by no means urgent. I've never tried to monitor a printer before and I just wanted to see what Observium told me about them. Thanks, - Richard -- Richard Kuhns <rjk(a)wintek.com> Wintek Corporation 427 N 6th Street Lafayette, IN 47901-2211 Main: 765-742-8428 Direct: 765-269-8541

3 3

non-continuous graphs
by Sathish.I 25 Feb '16

25 Feb '16

Hello All, WE have newly installed Observium, we are seeing the graph's in non-continuous pattern as below. Can you guys please check and suggest a solution. Regards, sathish

1 0

Getting "DB schema not installed, first install it." After CE upgrade
by KA PDE 25 Feb '16

25 Feb '16

Hi everyone, Today I've upgraded a CE Observium from 0.15.6 to 0.16.1 and it broke. It only shows DB schema not installed. I've noticed some errors in update-errors.log [2016/02/25 07:37:08 +0000] discovery.php(29504): Error: (1046) No database selected [2016/02/25 07:37:08 +0000] discovery.php(29504): Query: ALTER TABLE `bgpPeers` ADD INDEX `bgp_cache` (`bgpPeer_id`, `device_id`, `bgpPeerState`, `bgpPeerAdminStatus`, `bgpPeerRemoteAs`); [2016/02/25 07:37:08 +0000] discovery.php(29504): Error: (1046) No database selected [2016/02/25 07:37:08 +0000] discovery.php(29504): Query: ALTER TABLE `ospf_instances` ADD INDEX `ospf_cache` (`device_id`, `ospf_instance_id`, `ospfAdminStat`); [2016/02/25 07:37:08 +0000] discovery.php(29504): Error: (1046) No database selected [2016/02/25 07:37:08 +0000] discovery.php(29504): Query: ALTER TABLE `vrfs` ADD INDEX `vrf_cache` (`vrf_id`, `device_id`, `mplsVpnVrfRouteDistinguisher`); [2016/02/25 07:37:08 +0000] discovery.php(29504): Error: (1046) No database selected [2016/02/25 07:37:08 +0000] discovery.php(29504): ====== Schema update 264 -> 265 ============== [2016/02/25 07:37:08 +0000] discovery.php(29504): Query: ALTER TABLE `alerts_maint` ADD INDEX `maint_cache` (`maint_start`, `maint_end`); [2016/02/25 07:37:08 +0000] discovery.php(29504): Error: (1046) No database selected [2016/02/25 07:37:08 +0000] discovery.php(29504): ====== Schema update 265 -> 266 ============== [2016/02/25 07:37:08 +0000] discovery.php(29504): Query: ALTER TABLE `snmp_errors` DROP INDEX `error_index`; [2016/02/25 07:37:08 +0000] discovery.php(29504): Error: (1046) No database selected [2016/02/25 07:37:08 +0000] discovery.php(29504): Query: ALTER TABLE `snmp_errors` ADD UNIQUE `error_index` (`device_id`, `error_code`, `snmp_cmd`, `mib`(50), `oid`(100)); [2016/02/25 07:37:08 +0000] discovery.php(29504): Error: (1046) No database selected The strange thing is that I recently upgraded another server with no issues. The only difference is that I added the following config line later as there was an alert in the GUI (and now I'm adding it from start): $config['db_extension'] = 'mysqli'; Any hint will be greatly appreciated. Best regards, Pau

2 2

hey thanks for "Reset Limits" [SEC=UNCLASSIFIED]
by Peter.Hine＠familycourt.gov.au 25 Feb '16

25 Feb '16

just found it thanks VM Peter Hine Senior Technical Support Engineer (Servers) FCoA ITS peter.hine(a)familycourt.gov.au ********************************************************************** The information contained in this e-mail (including any attachments) is for the exclusive use of the addressee. If you are not the intended recipient please notify the sender immediately and delete this e-mail. It is noted that legal privilege is not waived because you have read this e-mail. **********************************************************************

1 0

Possible bug
by Nagy Attila 24 Feb '16

24 Feb '16

Hi all, We are using a customized location rewrite function to split the SNMP location of devices into a human readable and a machine understandable format. We are using the community edition, and on updating to the recent version we were faced with thIS error message: PHP Fatal error: Cannot redeclare custom_rewrite_location() (previously declared in /opt/observium/config.php:87) in /opt/observium/config.php on line 102 This is a common error when a php file is included/required more than once, so I made a workaround by renaming config.php to config.user.php and using require_once() in the original config.php to load these directives (it needs absolute path otherways it cannot find the file). Shouldn't require_once/include_once be used in all the places where referencing config.php? Br, Tylla,

5 10

Observium syslog year -0001
by Jason Vanlandingham 24 Feb '16

24 Feb '16

Lately (Since last CE update, I think) I've been seeing syslog messages for my Cisco router with a date stamp of "-0001-11-30" with text reading just something like "1:1". A little searching reveals that there was a mail list post from July 2014 for the same thing happening with Netgear equipment, but the only way I could see that post was through Google's cached result, and I can't find any replies. Is anyone else getting this? Known issue, perhaps?

1 0

Cisco SB SFP DOM/DDM monitoring
by chott＠praha1.net 24 Feb '16

24 Feb '16

Hello team, today i find OID for SFP monitoring in Cisco SB in this case there is OID and CLI info from CISCO SG300-10 switch and SFP in slot GI9 with DOM support can you add to Observium ? like Catalyst switches? Only in CLI there is mW for Power in SNMPwalk there is dBm but same value dBm is right value for DOM monitoring iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.5 = INTEGER: 47 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.6 = INTEGER: 3211700 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.7 = INTEGER: 6289 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.8 = INTEGER: -6809 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.9 = INTEGER: -9626 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.10 = INTEGER: 0 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.11 = INTEGER: 0 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.12 = INTEGER: 0 Port Temp Voltage Current Output Input LOS [C] [Volt] [mA] Power Power [mWatt] [mWatt] ----------- ------ ------- ------- ------- ------- --- gi1 Copper gi2 Copper gi3 Copper gi4 Copper gi5 Copper gi6 Copper gi7 Copper gi8 Copper gi9 47 3.20 6.28 0.20 0.10 No gi10 N/A N/A N/A N/A N/A N/A Temp - Internally measured transceiver temperature Voltage - Internally measured supply voltage Current - Measured TX bias current Output Power - Measured TX output power in milliWatts Input Power - Measured RX received power in milliWatts LOS - Loss of signal N/A - Not Available, N/S - Not Supported, W - Warning, E - Error Tom [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 733 123 135 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

4 16

Rancid-Mail configuration
by Sathish.I 23 Feb '16

23 Feb '16

Hi All, I am very new to observium, I have successfully integrated rancid with Observium, taking backup ups. However, I am unable to receive the mail when config difference. Can any share the config template to integrate rancid and mail configuration for configuration changes. Thanks in advance. Regards, sathish

2 1

Correct version not shon after device(raouter) upgradation
by Rakesh Vyas 23 Feb '16

23 Feb '16

Hi, Observium is not showing correct version after router version up gradation. We have to delete and add that device again. Any process to get auto update. Best regards Rakesh Vyas Lead, Network Data Operations Division Network, CORPORATE CENTER Sistema Shyam Teleservices Limited MTS Tower1 Building No. 334, Udyog Vihar Phase IV,Gurgaon MTS +91 913 600 1375 Direct Email: Rakesh.Vyas(a)MTSIndia.in [cid:image001.jpg@01D16E23.17796F00]<http://www.mtsindia.in/> ________________________________ This E-Mail may contain Confidential and/or legally privileged Information and is meant for the intended recipient(s) only. If you have received this e-mail in error and are not the intended recipient/s, Kindly notify the sender and then delete this e-mail immediately from your system. You are also hereby notified that any use, any form of reproduction, dissemination, copying, disclosure, modification, distribution and/or publication of this e-mail, its contents or its attachment/s other than by its intended recipient/s is strictly prohibited and may be unlawful. Internet Communications cannot be guaranteed to be secure or error-free as information could be delayed, intercepted, corrupted, lost, or contain viruses. Sistema Shyam Teleservices Limited does not accept any liability for any errors, omissions, viruses or computer problems experienced by any recipient as a result of this e-mail.

2 1

EIGRP
by Jason Vanlandingham 23 Feb '16

23 Feb '16

I've been running OSPF but am changing to EIGRP. EIGRP isn't showing in the routing section when I look at devices.

13 22

Export/import hosts
by Laszlo Nemeth 23 Feb '16

23 Feb '16

Hello, Because we have a problem with the alerts (if i set up an alert the Observium send an alert in every 5 minutes instead of 1 alert / 24 hour ) i decided to reinstall the Observium (First i installed the 201506(?) CE and updated it to CE 0.16.1.7533) So the question is can i export the hosts and import back after the reinstall procedure? Currently i have more than 50 hosts, so it is faster if i can just do an export/import instead of add all host again…. Thanks Laszlo

1 0