- observium - lists.observium.org

Is there something like "bad_ifalias" ?
by Hábner Teixeira Costa 25 Jan '16

25 Jan '16

Hi everyone, the company where I work is an ISP and they have big routers like MX-960 and ASR-9010.This devices supports thousands of interfaces and we use it to connect to our customers.I would like to know whether is possible to ignore our customers interfaces based on ifAlias like we do with ifDesc (bad_if)?Thank you! Hábner

2 3

Observium: Pre-auth and security questions
by Nate Mellendorf 25 Jan '16

25 Jan '16

Tom, I overlooked that setting and made the suggested change. However, Observium still seems to prompt for credentials after I sign in with basic auth. I changed the login mechanism to http-auth as well: $config['auth_mechanism'] = "http-auth"; I'll keep working on this, and report back if I can get it working. Thank you. Nate Mellendorf | NETWORK ANALYST | Netgain 720 West Saint Germain Street | St. Cloud | MN | 56301 Phone: 320.251.4700 x183 | 877.797.4700 x183 www.NetgainHosting.com The information contained in this email message is for the designated recipient only and may be privileged, confidential, and protected from disclosure. If you have received this message in error, please notify the sender immediately and delete the original. Any dissemination, distribution, copying or other use of this message or any information contained within is strictly prohibited. -----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of observium-request(a)observium.org Sent: Monday, January 25, 2016 5:24 AM To: observium(a)observium.org Subject: observium Digest, Vol 66, Issue 168 Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. BGP LocalAs fails on ASR9K (Andr? Mamitzsch) 2. Problem on some graphs - Percent Utilisation (Alexandre Corso) 3. Re: Problem on some graphs - Percent Utilisation (Adam Armstrong) 4. Re: Observium: Pre-auth and security questions (Tom Laermans) ---------------------------------------------------------------------- Message: 1 Date: Mon, 25 Jan 2016 11:05:26 +0100 From: Andr? Mamitzsch <andre(a)mamitzsch.de> To: observium(a)observium.org Subject: [Observium] BGP LocalAs fails on ASR9K Message-ID: <56A5F366.9050403(a)mamitzsch.de> Content-Type: text/plain; charset="utf-8" Hi, we discovered an issue with CISCO ASR9K and 4byte ASN's - the ASR return "0" when querying the BGP4-MIB parameter "bgpLocalAs". This stops observium from discovering the BGP sessions. I have done some research and found that Juniper devices seem to have a similar problem which was fixed in the polling / discovery script already. The same should be done for Cisco. The CISCO-BGP4-MIB included in Observium is somewhat outdated - CISCO introduced a parameter "cbgplocalAs" in a later version which delivers the correct result. Could you please look into this ? Thanks Andre

2 1

frontpage is great and all but can I have a second page?
by James Murty 25 Jan '16

25 Jan '16

I’m looking a using Observium to generate a number of metric specific dashboards for routers and switches I have around the country. The $config['frontpage']['minigraphs']['ids’] = “<id>,<metric>,<title>”; configuration looks like it’ll give me what I want but ideally I just have those minigraphs on a page by themselves. Is there a way to define a seconds page? i.e. $config[‘minigraphpage']['minigraphs']['ids’] = “<id>,<metric>,<title>”; and have that show on a second screen? - james

3 2

BGP LocalAs fails on ASR9K
by André Mamitzsch 25 Jan '16

25 Jan '16

Hi, we discovered an issue with CISCO ASR9K and 4byte ASN's - the ASR return "0" when querying the BGP4-MIB parameter "bgpLocalAs". This stops observium from discovering the BGP sessions. I have done some research and found that Juniper devices seem to have a similar problem which was fixed in the polling / discovery script already. The same should be done for Cisco. The CISCO-BGP4-MIB included in Observium is somewhat outdated - CISCO introduced a parameter "cbgplocalAs" in a later version which delivers the correct result. Could you please look into this ? Thanks Andre

1 0

VMware
by Stefaans Mostert (GBL) 25 Jan '16

25 Jan '16

<http://www.grindrodbank.co.za/Portals/JohannesburgOfficeMap.pdf> <http://www.grindrodbank.co.za/Portals/JohannesburgOfficeMap.pdf> Morning all New to observium and new to the list. Set it up yesterday and still feeling my way around, but I am pretty impressed so far. Is there a basic setup guide to monitor VMWare, somewhere? Sure I will be asking more questions as time passes [cid:1441083069.3051.3.camel@stefaansm-nb.grindrod.net] Lastly how do I get in touch with the guys from Observium? Can't find contact info anywhere. Stefaans Mostert Contractor: Linux System Administrator T: +27 11 459 1804 Fourth Floor, Grindrod Tower, 8A Protea Place, Sandton F: +27 11 459 1872 PO Box 78011, Sandton, Gauteng, 2146 [cid:imagebe2e55.GIF@55dd7ec4.43a0075b] www.grindrodbank.co.za ________________________________ This communication is intended for the addressee only, is privileged and confidential and unauthorised dissemination or copying is prohibited. The views and opinions expressed herein are those of the sender and do not necessarily represent those of Grindrod Bank Limited and/or its affiliates unless otherwise stated or agreed to in writing. All electronic communications are subject to important restrictions, qualifications and disclaimers ("Disclaimer") found at the following link<http://www.grindrodbank.co.za/Pages/TermsAndConditions>. Such disclaimer is deemed to form part of the content of this communication in terms of Section 11 of the Electronic Communications and Transactions Act, 25 of 2002. Please consider the environment before printing this email

5 6

device to device links
by Joey Stanford 24 Jan '16

24 Jan '16

Hi, I ran across a graphing script on github that caught my eye. It reportedly graphs device to device links in Observium (sort of like cacti + Network Weathermap). It uses a table called obserium.links which I don’t have. Google hasn’t been able to give me any leads other than, of course, the developer. I’m wondering if anyone happens to know if it’s possible to associate device ports in this manner… e.g. Device 25, port 287 links to Device 37, port 460. Today I use cacti and weathermap for this. Thanks, Joey

2 5

MySQL Agent Innodb
by evo 24 Jan '16

24 Jan '16

Hi, i am a private user of the Observium CE, and I wanted to ask If the MySQL agent will already be fixed in the ne CE release, otherwise I would happily provide a patch for the agent I made just a moment ago when I updated my MariaDB Server to 10 and the innodb query stopped working[0], since it's removed with version 10 and version 5.6.1 of MySQL[1]. If you'd want me to do that, I also would rewrite the whole agent to use mysqli instead of mysql, since it's considered deprecated for some time now[2]. with kind regards Valentin [0]https://mariadb.com/kb/en/mariadb/xtradbinnodb-server-system-variables/#h… [1]https://bugs.mysql.com/bug.php?id=63383 [2]http://php.net/manual/de/migration55.deprecated.php

2 1

Arbor Network's MIBs
by Ryan, Spencer 23 Jan '16

23 Jan '16

Great to see Arbor MIB's getting updated in the SVN checkouts :) I don't monitor any of our own products, but I'm going to talk to the Peakflow guys and see if I can get access to some of the lab gear. We have at least one setup (not sure if it's TMS or SP) that gets about ~8Gb/s of anonymous traffic from a few ISPs. Should give me some useful data in Observium. Keep up the good work guys! *Spencer Ryan* | Senior Systems Administrator | sryan(a)arbor.net *Arbor Networks* +1.734.794.5033 (d) | +1.734.846.2053 (m) www.arbornetworks.com

5 5

Manually setting global temperature thresholds
by Joey Stanford 22 Jan '16

22 Jan '16

Hi, I have a bit of a puzzler and I’m hoping someone can point me in the right direction. I’m monitoring a number of Mikrotik devices. I’m unable to set the temperature thresholds on the device. They all seem to report different thresholds despite the fact that they are all spec’d at -30c to 70c. Instead of going into each device’s settings in Observium and making a custom threshold, is there any way for me to do it in the config file? or some other way using “os eq routeros”? Thanks, Joey

3 8

4 Byte BGP ASN's
by Serghei Golipad 22 Jan '16

22 Jan '16

Guys, Have you made any progress with 4 Byte ASNs? 23456 doesn't look very nice :( Cheers PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. Kelway (UK) Ltd is a Company registered in England and Wales. This email is sent for and on behalf of Kelway Holdings Limited. Kelway Holdings Limited is the UK holding company for Kelway (UK) Limited trading as Kelway. The registered office for Kelway Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than Kelway or the sender of its existence. For more information about Kelway please visit www.kelway.co.uk

3 6

ASR9k fan failures not detected?
by Robert Williams 22 Jan '16

22 Jan '16

Hi, I've just noticed that fan failures on the ASR 9k are not detected by Observium. In fact, it seems have nothing at all under the 'status' tab? The 6500s have over 20 entries in there for "Fan - Fail" or "PSU - Fail" or "I'm not facing magnetic north - Fail" etc. but the ASR9000 have no status tab whatsoever. Reason for noticing this; is that we have a chassis which currently has a 'Major-Alarm' failure indicator LED on the RSP, due to a failed fan tray. Observium shows the device has being 'OK' and is not seeing either the Major alarm or the fan tray failure: canb-server[151]: %PLATFORM-CANB_SERVER-3-ALARM_INDICATION : Raise alarm from CBC in slot 0/FT0/SP, alarm code CBC_ALRM_FT_LED_RED_FAILED LED Information --------------------------------------------- R/S/I Modules LED Status 0/RSP0/* host Critical-Alarm Off host Major-Alarm On host Minor-Alarm Off host ACO Off host Fail Off FAN0 FAN1 FAN2 FAN3 FAN4 FAN5 FAN6 FAN7 FAN8 FAN9 FAN10 FAN11 FAN12 FAN13 0/FT0/* (Speed) 9900 9900 9870 9780 9870 9780 9780 10080 10080 9870 9990 9900 9810 9990 (fans are now OK again) Is this a case of Cisco not exporting any of this useful (and rather critical) information properly? Would be good to graph fan speeds if they are exported. Or are other people getting these OK and it's just us with the issue? Cheers! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

6 25

Memory graph not showing as intended.
by Max Krabbenhöft 22 Jan '16

22 Jan '16

Hello, I just set up Observium on CentOS 7 and everything works great! Except for one thing. The Memory and Virtual memory graph on the dashboard for windows/linux servers won't draw. Switches work fine though. When doing a debug I get this error message: SQL[INSERT INTO `mempools-state` (`mempool_id`) VALUES ('5')] RUNTIME[0.00012898s] ERROR[Error in query: (1364) Field 'mempool_polled' doesn't have a default value] I've been looking all over and can't find a resolution for this. This is how it should look [http://i.imgur.com/NMkyhMB.png] This is how it looks: [http://i.imgur.com/VEFSP1K.png] Thank you for your help Best regards Max

5 10

STRICT mode on SQL.
by Dirk-Willem van Gulik 22 Jan '16

22 Jan '16

FWIIW - may be that the STRICT mode is not the only delta. Spotted below error[1] during the initial discovery/poll cycle; and [2] in the update-error log (we are trying to figure out why the port graphs stopped updating). All on a -latest community version as of a few hours ago. Against "MYSQL Server version: 5.6.27 Source distribution” and PHP 5.6.17 (cli). Dw 1: SQL[SELECT *, I.`port_id` AS `port_id` FROM `ports` AS I LEFT JOIN `ports-state` AS S ON I.`port_id` = S.`port_id` WHERE `device_id` = '1'] RUNTIME[0.00157404s] ….. SQL[INSERT INTO `ports` (`device_id`,`ifIndex`) VALUES ('1','29')] RUNTIME[0.00024199s] ERROR[Error in query: (1062) Duplicate entry '1-29' for key 'device_ifIndex'] SQL[SELECT * FROM `ports` WHERE `port_id` = ''] RUNTIME[0.00043392s] Adding: po1(29)() SQL[INSERT INTO `ports` (`device_id`,`ifIndex`) VALUES ('1','30')] RUNTIME[0.00025010s] ERROR[Error in query: (1062) Duplicate entry '1-30' for key 'device_ifIndex’] …. 2: [observium@observium /usr/local/www/observium/logs]$ more update-errors.log [2016/01/22 12:09:22 +0000] discovery.php(23667): ====== Schema update 137 -> 138 ============== [2016/01/22 12:09:22 +0000] discovery.php(23667): Query: ALTER TABLE `sensors` ADD `entPhysicalIndex_measured` varchar(16) COLLATE utf8_unicode_ci DEFAULT NULL AFTER `sensor_custom_limit`; [2016/01/22 12:09:22 +0000] discovery.php(23667): Error: (1060) Duplicate column name 'entPhysicalIndex_measured' [2016/01/22 12:09:22 +0000] discovery.php(23667): Query: ALTER TABLE `sensors` ADD `measured_class` VARCHAR( 32 ) NULL DEFAULT NULL AFTER `entPhysicalIndex_measured`; [2016/01/22 12:09:22 +0000] discovery.php(23667): Error: (1060) Duplicate column name 'measured_class' [2016/01/22 12:09:22 +0000] discovery.php(23667): Query: ALTER TABLE `sensors` ADD `measured_entity` VARCHAR( 32 ) NULL DEFAULT NULL AFTER `measured_class`; [2016/01/22 12:09:22 +0000] discovery.php(23667): Error: (1060) Duplicate column name ‘measured_entity'

2 1

ModbusTCP via SNMP Gateway. Possible to monitor in Observium?
by Henrik Cednert (Filmlance) 22 Jan '16

22 Jan '16

Hi I have a schneider tsxetg100 ethernet gateway that has a PowerLogic PM3250 attached to it. I can successfully monitor this in APC StruxureWare Data Center expert but trying to get away from that solution. Observium does find and see the tsxetg100 as a generic device but I don't see the PowerLogic attached to it. Is it possible to monitor a Modbus TCP device like this through the SNMP gateway? The tsxetg100: http://www.schneider-electric.com/download/ww/en/details/25779671-TSXETG100… The Powerlogic: http://www.schneider-electric.com/en/product-range/61274-powerlogic-pm3000-… Cheers and thanks -- Henrik Cednert cto | td | compositor Filmlance International Direct + 46 (0)704 71 89 54

4 15

Making older pre rfc 1759 printers happy
by Dirk-Willem van Gulik 22 Jan '16

22 Jan '16

Minor diff to make things work with an older type of printer. Dw --- toner.inc.php.orig 2016-01-21 19:49:49.528405666 +0100 +++ toner.inc.php 2016-01-21 20:06:36.382527604 +0100 @@ -39,10 +39,11 @@ $index = $split_oid[count($split_oid)-1]; if (is_numeric($role)) { - $type_oid = ".1.3.6.1.2.1.43.11.1.1.5.1.$index"; - $descr_oid = ".1.3.6.1.2.1.43.11.1.1.6.1.$index"; - $capacity_oid = ".1.3.6.1.2.1.43.11.1.1.8.1.$index"; - $toner_oid = ".1.3.6.1.2.1.43.11.1.1.9.1.$index"; + $class_oid = ".1.3.6.1.2.1.43.11.1.1.4.1.$index"; // prtMarkerSuppliesClass (supplyThatIsConsumed(3), receptacleThatIsFilled(4)) + $type_oid = ".1.3.6.1.2.1.43.11.1.1.5.1.$index"; // prtMarkerSuppliesType + $descr_oid = ".1.3.6.1.2.1.43.11.1.1.6.1.$index"; // prtMarkerSuppliesDescription + $capacity_oid = ".1.3.6.1.2.1.43.11.1.1.8.1.$index"; // prtMarkerSuppliesMaxCapacity + $toner_oid = ".1.3.6.1.2.1.43.11.1.1.9.1.$index"; // prtMarkerSuppliesLevel $classtype = snmp_get($device, $class_oid, "-Oqv"); $resourcetype = snmp_get($device, $type_oid, "-Oqv"); @@ -52,8 +53,10 @@ { switch ($resourcetype) { - case 3: - case 21: + case 3: // Toner + case 5: // Ink or particulate + case 6: // InkCardridge + case 21: // Toner Cardridge /* .1.3.6.1.2.1.43.11.1.1.8 prtMarkerSuppliesMaxCapacity * The value (-1) means other and specifically indicates that the sub-unit places * no restrictions on this parameter. The value (-2) means unknown. @@ -133,8 +136,11 @@ set_dev_attrib($device, "transferroller_cap_oid", $capacity_oid); } break; - case 4: - if (stristr($descr, 'waste') !== FALSE) + case 4: // Waste Toner + case 8: // Waste Ink or toner + case 24: // Waste liquid or Ink + if (stristr($descr, 'waste') !== FALSE || stristr($descr, 'absorber') == FALSE || $classtype == 3) { echo(" WasteTonerBox"); set_dev_attrib($device, "wastebox_oid", $toner_oid);

3 6

Proxmox
by Cody Cook 22 Jan '16

22 Jan '16

Hi everyone, Two things about Proxmox and my usage with Observium: Upgraded all of my Proxmox boxes except one to 4.0 from 3.4. I use zfs for all the file systems. Since switching to Proxmox 4.0, appears that snmp no longer includes the zfs volumes automatically in the SNMP reply. :( Does anyone have some suggestions on automatically showing their zfs vols in SNMP? I read a manpage for snmpd.conf but only recognized the ignoreDisk screen to manually add. Some other site said begemotSnmpdModulePath."hostres" = /usr/lib/snmp_hostres.so would be useful if I was on FreeBSD, but I am using Debian :P Another question I had is that I was reading that there is the ability to query Proxmox for VMs. Neither my 3.4 or my 4.0 box show VMs. My enable_libvirt is 1 and I use lxc+ssh and openvz+ssh in the libvirt protocols option in the config (lxc for 4.0, openvz for 3.4). I don't see anything VM. I do have tab for VMs for my vmware esxi server though. The public key from Observium is in the authorized_keys file for each of my root users on each proxmox box. What am I missing here? net-snmp version: 5.7.2.1+dfsg-1 Cody

2 2

Location
by Tibor Marchyn 22 Jan '16

22 Jan '16

Hi all, I don't know if it's bug, but I have set locaton on alsmost all my devices, but let's say 1 day ago it wasn't. so few of them was as Unknown location and in devices menu I saw structure like "Unknown -> unset ; Prague -> address, ... " I have fixed location and started poller and discovery. Poller got new location for each device where it was unset. But in menu I still saw structure like Devices - Locations | |- <empty string> | |-Address1 (8 count) | |-<Prague> |-Address1 (55 count) And Address1 is same for both sections because devices in both sections have same sysLocation parameter. Also doesn't matter which menu I click, I always got list of all devices with this sysLocation parameter (63 count). Also I have in config these lines to replace location with exact address and it works fine. $config['location_map']['Prague'] = "my street, Prague, Czech Republic"; $config['location_map']['Nashville'] = "us street, Franklin, TN 12345"; Do you know how to force Observium to move fixed location devices under "Prague" town and show proper count of devices? Thanks

2 1

[Observium] /usr/local/www/observium/html/includes/graphs/sensor/capacity.inc.php
by Dirk-Willem van Gulik 21 Jan '16

21 Jan '16

Hmm - in -latest.tar.gz there seems to be a reference to /usr/local/www/observium/html/includes/graphs/sensor/capacity.inc.php from /usr/local/www/observium-latest/html/includes/graphs/graph.inc.php with Graph type: sensor, subtype: graph which is somehow caused by: includes/graphs/sensor/auth.inc.php not checking (unlike graph.inc.php) if such an include exists. So I wonder if that auth.inc should become: { if ($subtype == 'graph') { // Fix generic subtype $subtype = $sensor['sensor_class']; $possible_inc = $config['html_dir'] . "/includes/graphs/$type/$subtype.inc.php"; if (is_file($possible_inc)) { $graph_include = $possible_inc; }; } Dw.

1 0

Spikes in billing
by Eduardo Schoedler 21 Jan '16

21 Jan '16

Hi, Is there a way to remove spikes from the billing? [image: Imagem inline 1] Thank you. Regards, -- Eduardo Schoedler

2 16

Lost discover of the 'ports'.
by Dirk-Willem van Gulik 21 Jan '16

21 Jan '16

We recently installed a new/parallel Observium (the old one had not been upgraded for years). The baseline is from http://www.observium.org/observium-community-latest.tar.gz as of today; with a new/fresh config.php. All fine & modern — except for the Ports on the various firewalls and switches not showing up automatically (Neither in ports or in settings; Port Properties). The ‘ports’ poller module is enable; as are POE and ports/port-stack in discovery. Any hint as where to fix/debug/dig as to understand why this is ? Thanks, Dw. Observium CE 0.15.6.6430 Discovery Current Revision : 6430 New Revision : 7522 XXXXXXXX Module [ os ] time: 0.1062s Ports : em0(1)[] em1(2)[] ste0(3)[] ste1(4)[] ste2(5)[] ste3(6)[] em2(7)[] em3(8)[] em4(9)[] pflog0(10)[] pfsync0(11)[] lo0(12)[] enc0(13)[] em0_vlan1(14)[] em0_vlan2(15)[] em0_vlan3(16)[] em0_vlan4(17)[] pppoe2(18)[] ….. Observium CE 0.15.6.6430 Discovery Current Revision : 6430 New Revision : 7522 XXXXXXX Module [ os ] time: 0.0709s Ports : Slot0/1(1)[] Slot0/2(2)[] Slot0/3(3)[] Slot0/4(4)[] Slot0/5(5)[] Slot0/6(6)[] Slot0/7(7)[] Slot0/8(8)[] Slot0/9(9)[] Slot0/10(10)[] Slot0/11(11)[] Slot0/12(12)[] Slot0/13(13)[] Slot0/14(14)[] Slot0/15(15)[] Slot0/16(16)[] Slot0/17(17)[] Slot0/18(18)[] Slot0/19(19)[] Slot0/20(20)[] Slot0/21(21)[] Slot0/22(22)[] Slot0/23(23)[] Slot0/24(24)[] Slot0/25(25)[] Slot0/26(26)[] Slot0/27(27)[] Slot0/28(28)[] po1(29)[] po2(30)[] po3(31)[] po4(32)[] po5(33)[] po6(34)[] po7(35)[] po8(36)[] po9(37)[] po10(38)[] po11(39)[] po12(40)[] po13(41)[] po14(42)[] vlanMgmt(43)[] Module [ ports ] time: 0.4609s Port Stacks: ...................................................................................... Module [ ports-stack ] time: 0.1803s Processors : AGENT-GENERAL-MIB hrDevice:

2 9

Narrower OID detection
by Dirk-Willem van Gulik 21 Jan '16

21 Jan '16

I’ve got a couple of devices with SNMPv2-MIB::sysDescr.0 = STRING: Linux ypenburg 2.6.36.2-wndap660_620-WNDAP660_V3.0.5.0 #1 Fri Oct 23 19:40:53 IST 2015 ppc SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.4526.100.7.13 So I’d like to expand the $os = "netgear"; $config['os'][$os]['text'] = "Netgear"; $config['os'][$os]['type'] = "network"; $config['os'][$os]['icon'] = "netgear"; $config['os'][$os]['sysObjectID'][] = ".1.3.6.1.4.1.4526"; $config['os'][$os]['sysObjectID'][] = ".1.3.6.1.4.1.12622"; $config['os'][$os]['over'][0]['graph'] = "device_bits"; $config['os'][$os]['mibs'][] = "UCD-SNMP-MIB”; with a much *narrower* section; specific for the wifi access point devices (all in 1.3.6.1.4.1.4526.100.4,7,8,15.*) - as to make auto discovery work better & get the incon/type right. What is the best way to go about it (currently we use a small stub in include/discover/wifi that ‘forces’ the setting) — or is the config[] somehow able to go from narrow to broad already ? Dw. *: http://www.circitor.fr/Mibs/Html/Netgear-MIB.php

1 0

Support for EMC VNX-series
by Eddy Mouws 21 Jan '16

21 Jan '16

Hi, I ‘m not certain if this is the right way to ask; but I see support for EMC devices is available. When will it become available in the CE-edition ? Regards, Eddy [cid:imaged81d12.JPG@e4bcd153.4ea42732] Eddy Mouws Email: eddy(a)businessconnect.nl<mailto:eddy@businessconnect.nl> WWW: www.businessconnect.nl<http://www.businessconnect.nl/> Hofdreef 42b 4881 DR Zundert Nederland Tel: 076-5987777 Fax: 076-5987070 Disclaimer: Deze e-mail en eventuele bestanden die bij dit bericht zijn verzonden, zijn vertrouwelijke en uitsluitend bestemd voor gebruik door de geadresseerde(n). Indien dit bericht niet voor u is bestemd, is openbaarmaking, vermenigvuldiging, verspreiding en/of het ondernemen van acties op basis van inhoud van de per abuis verkregen informatie verboden. Tevens verzoeken wij u vriendelijk om de afzender hiervan onmiddellijk per email op de hoogte te brengen en het bericht vervolgens van uw systeem te verwijderen.

1 0

DirectoryIndex index.php
by Dirk-Willem van Gulik 21 Jan '16

21 Jan '16

While at it - a small nit w.r.t to the otherwise cut-and-paste perfect: http://www.observium.org/docs/install_* pages — a config for apache DirectoryIndex index.php should be added; either global or, better, within the <Directory … blocks. As it is no longer part of most php default installs. Furthermore - if you want to be very safe on modern unixes - adding a: SetHandler application/x-httpd-php is not a bad idea; and otherwise harmless; as some now avoid this by default for security reasons. Dw.

1 0

Weatherman and Observium
by Serghei Golipad 21 Jan '16

21 Jan '16

Guys, Any one else has this problem? /opt/observium/html/weathermap# ./map-poller.php PHP Fatal error: require_once(): Failed opening required '/includes/db.inc.php' (include_path='.:/usr/share/php:/usr/share/pear') in /opt/observium/includes/definitions.inc.php on line 435 Map fails to appear under weathermap in the main menu. Thanks PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. Kelway (UK) Ltd is a Company registered in England and Wales. This email is sent for and on behalf of Kelway Holdings Limited. Kelway Holdings Limited is the UK holding company for Kelway (UK) Limited trading as Kelway. The registered office for Kelway Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than Kelway or the sender of its existence. For more information about Kelway please visit www.kelway.co.uk

3 5

Cisco IPSEC tunnel problem
by Bastiaan Topper 21 Jan '16

21 Jan '16

Hi all, Attached you find the debug output of the cipsec-tunnels module. We miss some tunnels in the statistics, while they are successful up and running, Observium isn't reporting them. What I see is that the Cisco SNMP is successfully returning the information and, for example in this case, one of the tunnels is showed in the GUI. [cid:image001.png@01D15447.C82C9070] Are we doing something wrong? Or is this a bug? Regards, Bastiaan

2 1