- observium - lists.observium.org

Displaying ports sensors with ports
by Louis Bailleul 23 Jul '15

23 Jul '15

Hi, I am monitoring an Arista 7508E with 4x7500E-36Q-LC line cards. This are 40GB ports that can be subdivided into 10GB ports. This represent a maximum of 576 10GB ports, each of them having several sensors (See below what the Observium inventory reports). Right now, these sensors are graphed all together with the chassis sensors making graphs that are not really useful (See attached). Is it/would it be possible, to display each sensors in the detailed view of the ports instead ? * 1. Xcvr Slot 1Xcvr Slot 1 * 1. QSFP-40G-SR4Xcvr for Ethernet4/1 [Serial: XMD13450006W] * 1. DOM Temperature Sensor for Ethernet4/1 (http://lnetmonitor01.lon.compute.pgs.com/device/device=127/tab=health/metri… Temperature Sensor for Ethernet4/1 (32.30000 temperature) (http://lnetmonitor01.lon.compute.pgs.com/device/device=127/tab=health/metri…) * 2. DOM Voltage Sensor for Ethernet4/1 (http://lnetmonitor01.lon.compute.pgs.com/device/device=127/tab=health/metri… Voltage Sensor for Ethernet4/1 (3.27000 voltage) (http://lnetmonitor01.lon.compute.pgs.com/device/device=127/tab=health/metri…) * 0. Lane 0 for Xcvr for Ethernet4/1Lane 0 for Xcvr for Ethernet4/1 * 1. DOM TX Bias Sensor for Ethernet4/1/1 (http://lnetmonitor01.lon.compute.pgs.com/device/device=127/tab=health/metri… TX Bias Sensor for Ethernet4/1/1 (0.00815 current) (http://lnetmonitor01.lon.compute.pgs.com/device/device=127/tab=health/metri…) * 3. DOM RX Power Sensor for Ethernet4/1/1 (http://lnetmonitor01.lon.compute.pgs.com/device/device=127/tab=health/metri… RX Power Sensor for Ethernet4/1/1 (0.00050 power) (http://lnetmonitor01.lon.compute.pgs.com/device/device=127/tab=health/metri…) * 1. Lane 1 for Xcvr for Ethernet4/1Lane 1 for Xcvr for Ethernet4/1 * 1. DOM TX Bias Sensor for Ethernet4/1/2 (http://lnetmonitor01.lon.compute.pgs.com/device/device=127/tab=health/metri… TX Bias Sensor for Ethernet4/1/2 (0.00778 current) (http://lnetmonitor01.lon.compute.pgs.com/device/device=127/tab=health/metri…) * 3. DOM RX Power Sensor for Ethernet4/1/2 (http://lnetmonitor01.lon.compute.pgs.com/device/device=127/tab=health/metri… RX Power Sensor for Ethernet4/1/2 (0.00052 power) (http://lnetmonitor01.lon.compute.pgs.com/device/device=127/tab=health/metri…) * 2. Lane 2 for Xcvr for Ethernet4/1Lane 2 for Xcvr for Ethernet4/1 * 1. DOM TX Bias Sensor for Ethernet4/1/3 (http://lnetmonitor01.lon.compute.pgs.com/device/device=127/tab=health/metri… TX Bias Sensor for Ethernet4/1/3 (0.00742 current) (http://lnetmonitor01.lon.compute.pgs.com/device/device=127/tab=health/metri…) * 3. DOM RX Power Sensor for Ethernet4/1/3 (http://lnetmonitor01.lon.compute.pgs.com/device/device=127/tab=health/metri… RX Power Sensor for Ethernet4/1/3 (0.00053 power) (http://lnetmonitor01.lon.compute.pgs.com/device/device=127/tab=health/metri…) * 3. Lane 3 for Xcvr for Ethernet4/1Lane 3 for Xcvr for Ethernet4/1 * 1. DOM TX Bias Sensor for Ethernet4/1/4 (http://lnetmonitor01.lon.compute.pgs.com/device/device=127/tab=health/metri… TX Bias Sensor for Ethernet4/1/4 (0.00737 current) (http://lnetmonitor01.lon.compute.pgs.com/device/device=127/tab=health/metri…) * 3. DOM RX Power Sensor for Ethernet4/1/4 (http://lnetmonitor01.lon.compute.pgs.com/device/device=127/tab=health/metri…) DOM RX Power Sensor for Ethernet4/1/4 (0.00053 power) (http://lnetmonitor01.lon.compute.pgs.com/device/device=127/tab=health/metri…) Best regards,Louis

3 3

RANCID/Cron/GUI
by chott＠praha1.net 23 Jul '15

23 Jul '15

Hello, we now have integrated RANCID, and working fine but we have cron for every 4hour download config i see new config file in /var/lib/rancid/observium/configs but in Observium GUI in Config file there is only previous file Tomas [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

2 19

Multiple Contacts for Alerts
by Rudolf Hoehler 23 Jul '15

23 Jul '15

Hello Community, I have some questions regarding email alerts with Observium: 1. I would like to know whether it is possible to get Observium to alert different email addresses for certain triggers? Possible via the config file? 2. Will Observium try and email the "contact" email address in the SNMP field "contact"? Thanks, Rudolf

3 5

(no subject)
by Serghei Golipad 23 Jul '15

23 Jul '15

Guys, Any ideas? Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Getting those on running discovery. Cheers Serghei Golipad - CCIE(r) #45033 Network Consultant @ Kelway UK 1 Cyrus Way, Cygnet Park Hampton, Peterborough, PE7 8HP DDI: 0203 069 5165 Mobile: 07469 081 910 Web: www.kelway.com<http://www.kelway.com/> Email: s.golipad(a)kelway.com PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. Kelway (UK) Ltd is a Company registered in England and Wales. This email is sent for and on behalf of Kelway Holdings Limited. Kelway Holdings Limited is the UK holding company for Kelway (UK) Limited trading as Kelway. The registered office for Kelway Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than Kelway or the sender of its existence. For more information about Kelway please visit www.kelway.co.uk

3 3

Question about traffic graphs
by Talk Jesus 22 Jul '15

22 Jul '15

Hi, My data center bills me based on 95th percentile and Mbps, but Observium shows traffic as bits/second. My monthly allowance is 100Mbps, how would I convert that to the bits/second in 95th? They also state they bill me on bandwidth utilization, not data used. Finally, they state they use 5 minute intervals for data collection, I guess that's also called 'polling' if I'm not mistaken? I could not find any info on how often the data is collected. Just to clarify, if I got the calculation right - 100Mbps = 30TB /mo (rounded off).

3 13

Custom pages and integration
by Robert Sanders 22 Jul '15

22 Jul '15

Hello, I am looking for someone to help us with customizing and integrating the Observium data into other pages within our network of sites. If your interested please contact me directly. Robert Sanders ManagedWay Company 24700 Northwestern Hwy Suite 100 Southfield MI 48075 (888) 745-6948

1 0

quick observium survey
by Simon Smith 22 Jul '15

22 Jul '15

Hi All, this is a quick email about a survey I’m looking at starting my observium from scratch could people fill out this survey? http://goo.gl/forms/xEPrQ13MHd <http://goo.gl/forms/TJvGQHHXXs> the results should appear public for anyone to look at ! no-login required, just fill out :) Regards SImon

7 11

Re: [Observium] Build 6668 - cannot add Alert Contact
by Rudolf Hoehler 22 Jul '15

22 Jul '15

Hi Tomas, The Contact feature is still in development. You can setup a default email in the config file, let me know if you need help. Rudolf From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> on behalf of "chott(a)praha1.net<mailto:chott@praha1.net>" <chott(a)praha1.net<mailto:chott@praha1.net>> Reply-To: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Date: Wednesday 22 July 2015 at 10:01 To: Observium Network Observation System <observium(a)observium.org<mailto:observium@observium.org>> Subject: [Observium] Build 6668 - cannot add Alert Contact Hello, after buy PRO version we cannot set Alerting contact because after click to "Add Contact" http://<IPobservium>/add_contact/ Observium redirect to Main page Tomas [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net>

2 1

RRD graphs legend
by Attila Nagy 22 Jul '15

22 Jul '15

Hi All! I was thinking whether there is some way to make the graphs more user friendly. I am talking about aggregated RRDTool graphs that have more data lines in it. One example (as seen in the attached screenshot) is the typical filesystem usage graph of a linux host, that has a legend below it, but as the colors are not quite unique (at more than 5-6 data lines some colors will overlap inevitably) you can't really find out which line is which. If you want to find out which data line has that glitch that you saw in the aggregated graph, there is no other way than looking at each data separately. Is there a way/plan to overcome this limitation? Regards, Tylla

3 6

strange svn update
by Simon Smith 22 Jul '15

22 Jul '15

Hi All, wondering if anyone has seen this issue, I did an SVN update and getting this strange error? root@observium:~# svn update /opt/observium && /opt/observium/discovery.php -u U /opt/observium/html/pages/device/ports.inc.php U /opt/observium/html/pages/slas.inc.php U /opt/observium/html/pages/health.inc.php U /opt/observium/html/includes/functions.inc.php A /opt/observium/includes/polling/os/compellent.inc.php U /opt/observium/includes/discovery/sensors.inc.php A /opt/observium/includes/discovery/sensors/compellent-mib.inc.php U /opt/observium/includes/discovery/sensors/idrac-mib-smiv2.inc.php A /opt/observium/includes/definitions/status.inc.php U /opt/observium/includes/definitions/sensors.inc.php U /opt/observium/includes/definitions/os.inc.php U /opt/observium/includes/common.inc.php G /opt/observium/includes/defaults.inc.php U /opt/observium/includes/definitions.inc.php U /opt/observium/includes/snmp.inc.php A /opt/observium/mibs/dell/COMPELLENT-MIB Updated to revision 6724. Observium 0.15.7.6724 Discovery Currently installed revision : 6724 (0.15.7.6724) Latest revision available on observium.org : 6724 <div class="alert alert-danger"> <div>Failed INSERT into DB, see details in 'db (0.15.7.6724 <div class="alert alert-danger"> <div>Failed INSERT into DB, see details in 'db.log' inside log dir.</div> </div>) root@observium:~# Ive then checked the db.log file and I see this [2015/07/14 21:21:58 +0100] alerter.php(19534): Failed dbQuery (#2006 - MySQL server has gone away), Query: SELECT * FROM `alert_assoc` [2015/07/14 21:21:58 +0100] alerter.php(19534): Failed dbQuery (#2006 - MySQL server has gone away), Query: SELECT `device_id` FROM `devices` WHERE `disabled` = 0 AND `device_id` = '9' ORDER BY `device_id` ASC [2015/07/14 21:22:04 +0100] poller.php(19518): Failed dbQuery (#2006 - MySQL server has gone away), Query: UPDATE `alert_table-state` set `state` ='{\"metrics\":{\"device_status_type\":\"snmp\",\"device_status\":\"0\"},\"failed\":[{\"value\":\"snmp\",\"condition\":\"=\",\"metric\":\"device_status_type\"},{\"value\":\"0\",\"condition\":\"=\",\"metric\":\"device_status\"}]}',`count` ='1783',`alert_status` ='0',`last_message` ='Checks failed',`last_checked` ='1436905324' WHERE `alert_table_id` = '84' [2015/07/14 21:22:04 +0100] poller.php(19518): Failed dbQuery (#2006 - MySQL server has gone away), Query: UPDATE `alert_table-state` set `state` ='{\"metrics\":{\"device_uptime\":null}}',`count` ='0',`alert_status` ='1',`last_message` ='Checks OK',`last_checked` ='1436905324' WHERE `alert_table_id` = '85' [2015/07/14 21:22:04 +0100] poller.php(19518): Failed dbQuery (#2006 - MySQL server has gone away), Query: UPDATE `alert_table-state` set `state` ='{\"metrics\":{\"device_status_type\":\"snmp\",\"device_status\":\"0\"},\"failed\":[{\"value\":\"0\",\"condition\":\"=\",\"metric\":\"device_status\"}]}',`count` ='0',`alert_status` ='1',`last_message` ='Checks OK',`last_checked` ='1436905324' WHERE `alert_table_id` = '126' [2015/07/14 21:22:04 +0100] poller.php(19518): Failed dbQuery (#2006 - MySQL server has gone away), Query: INSERT INTO `perf_times` (`type`,`doing`,`start`,`duration`,`devices`) VALUES ('poll','44','1436905318.1116','6.053','1') [2015/07/20 21:37:01 +0100] discovery.php(31122): Failed dbQuery (#1146 - Table 'observium.observium_attribs' doesn't exist), Query: SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'dbSchema' [2015/07/20 21:37:04 +0100] poller.php(31134): Failed dbQuery (#1146 - Table 'observium.observium_attribs' doesn't exist), Query: SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'dbSchema'; [2015/07/20 21:37:07 +0100] poller.php(31158): Failed dbQuery (#1146 - Table 'observium.observium_attribs' doesn't exist), Query: SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'dbSchema’; but when i check my MySQL DB i see the table observium_attribs exists and data is in there ? any ideas how i clear this alert msg when i do the svn update? Regards Simon

2 2

Build 6668 - cannot add Alert Contact
by chott＠praha1.net 22 Jul '15

22 Jul '15

Hello, after buy PRO version we cannot set Alerting contact because after click to "Add Contact" http://<IPobservium>/add_contact/ Observium redirect to Main page Tomas [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 604 930 119 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net>

4 5

Re: [Observium] observium Digest, Vol 60, Issue 132
by Dudu Handelman 21 Jul '15

21 Jul '15

Thanks Mike. Just upgraded to r6719 still blank. David Sent from my Samsung device -------- Original message -------- From: observium-request(a)observium.org Date: 21/07/2015 16:20 (GMT+02:00) To: observium(a)observium.org Subject: observium Digest, Vol 60, Issue 132 Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Re: Neighbours blank page. (Mike Stupalov) 2. Problem during upgrade to r6718 (Romain Winter) ---------------------------------------------------------------------- Message: 1 Date: Tue, 21 Jul 2015 16:08:40 +0300 From: Mike Stupalov <mike(a)observium.org> To: observium(a)observium.org Subject: Re: [Observium] Neighbours blank page. Message-ID: <55AE4458.3070708(a)observium.org> Content-Type: text/plain; charset="utf-8" Fixed in r6718. Tnx to all reporters :) On 21.07.15 16:04, Jonathan Dyson wrote: > > We also have empty pages! > > > > Thanks, > > Jon > > > > *From:*observium [mailto:observium-bounces@observium.org] *On Behalf > Of *Tomasz Karczewski > *Sent:* 21 July 2015 14:02 > *To:* 'Observium Network Observation System' > *Subject:* Re: [Observium] Neighbours blank page. > > > > I have empty pages too. > > > > Tomasz Karczewski > > Administrator Sieci > > > > > > tkarczewski(a)man.olsztyn.pl <mailto:tkarczewski@man.olsztyn.pl> > > http://www.man.olsztyn.pl http://www.uwm.edu.pl > > tel. (89) 523 45 55 fax. (89) 523 43 47 > > > > O?rodek Eksploatacji i Zarz?dzania > > Miejsk? Sieci? Komputerow? OLMAN w Olsztynie > > Uniwersytet Warmi?sko-Mazurski w Olsztynie > > > > *From:*Dudu Handelman [mailto:duduhandelman@hotmail.com] > *Sent:* Tuesday, July 21, 2015 2:43 PM > *To:* observium(a)observium.org <mailto:observium@observium.org> > *Subject:* [Observium] Neighbours blank page. > > > > Hi All, > Just upgraded to revision 6716, > For some reason the Neighbours and the Map sections for Switches are > empty. > The data is in the database and displayed correctly on the interfaces > page. > > Has any one else notice this? > > Many Thanks > David, > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov http://observium.org

2 1

Neighbours blank page.
by Dudu Handelman 21 Jul '15

21 Jul '15

Hi All, Just upgraded to revision 6716, For some reason the Neighbours and the Map sections for Switches are empty. The data is in the database and displayed correctly on the interfaces page. Has any one else notice this? Many Thanks David,

4 4

Problem during upgrade to r6718
by Romain Winter 21 Jul '15

21 Jul '15

Hi, Im upgrading to reversion 6718 Im getting database error's while upgrading: > cat update-errors.log > [2015/05/28 15:04:58 +0200] discovery.php(13518): ====== Schema update > 137 -> 138 ============== > [2015/05/28 15:04:58 +0200] discovery.php(13518): Query: ALTER TABLE > `sensors` ADD `entPhysicalIndex_measured` varchar(16) COLLATE > utf8_unicode_ci DEFAULT NULL AFTER `sensor_custom_limit`; > [2015/05/28 15:04:58 +0200] discovery.php(13518): Error: Duplicate > column name 'entPhysicalIndex_measured' > [2015/05/28 15:04:58 +0200] discovery.php(13518): Query: ALTER TABLE > `sensors` ADD `measured_class` VARCHAR( 32 ) NULL DEFAULT NULL AFTER > `entPhysicalIndex_measured`; > [2015/05/28 15:04:58 +0200] discovery.php(13518): Error: Duplicate > column name 'measured_class' > [2015/05/28 15:04:58 +0200] discovery.php(13518): Query: ALTER TABLE > `sensors` ADD `measured_entity` VARCHAR( 32 ) NULL DEFAULT NULL > AFTER `measured_class`; > [2015/05/28 15:04:58 +0200] discovery.php(13518): Error: Duplicate > column name 'measured_entity' Also, db.log > cat db.log > [2015/07/21 15:13:02 +0200] poller.php(1056): Failed dbQuery (#1146 - > Table 'observium.observium_attribs' doesn't exist), Query: SELECT > `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'dbSchema'; > [2015/07/21 15:13:08 +0200] discovery.php(1128): Failed dbQuery (#1146 > - Table 'observium.observium_attribs' doesn't exist), Query: SELECT > `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'dbSchema'; > [2015/07/21 15:13:08 +0200] discovery.php(1128): Failed dbQuery (#1146 > - Table 'observium.dbSchema' doesn't exist), Query: UPDATE `dbSchema` > set `version` ='211' Anybody having the same issue? Kind regards, Romain winter. -- OpenmindedIT <http://www.open-minded-it.nl> Adres: Aphroditestraat 23 5047 TW Tilburg tel: 0031 (0) 13 707 8093 fax: 0031 (0) 13 570 1113 Web: www.openmindedit.nl <http://www.open-minded-it.nl> E-mail: r.winter(a)openmindedit.nl <mailto:r.winter@openmindedit.nl> --- Dit bericht is slechts bestemd voor de geadresseerde en kan informatie bevatten die persoonlijk en/of vertrouwelijk is en die niet openbaar mag worden gemaakt. Indien u niet zelf de geadresseerde bent, wordt u erop gewezen dat verdere verspreiding, openbaarmaking of vermenigvuldiging van dit bericht verboden is. Indien u dit bericht per vergissing hebt ontvangen, verzoek ik u mij zo snel mogelijk op de hoogte te stellen en het originele bericht en eventuele kopieën ervan, te verwijderen. Op alle aanbiedingen, overeenkomsten , facturen en transacties van Open Minded IT ECS zijn onze algemene voorwaarden van toepassing. Deze kunt U inzien op http://www.open-minded-it.nl/index.php/algemene-voorwaarden/ op verzoek wordt een exemplaar U kosteloos toegezonden. Dank voor uw medewerking. Open Minded IT ECS Bezoek adres: Aphroditestraat 23 5047 TW Tilburg tel: 0031 (0) 13 707 8093 fax: 0031 (0) 13 570 1113 Web: www.open-minded-it.nl E-mail: info(a)open-minded-it.nl

2 3

Comercial Support
by Rudolf Hoehler 21 Jul '15

21 Jul '15

Hello Observium Team, I would like to purchase Support/Service options. From the client page I can only renew my 150 GBP subscription. How do we go about purchasing support or paying for feature development? Regards, Rudolf

1 0

Raisecom
by Adam Armstrong 21 Jul '15

21 Jul '15

Any of you guys running Raisecom kit? Thanks, adam.

3 2

OVS integration plugin for observium available?
by gmail 21 Jul '15

21 Jul '15

Hi, Is there any plugin for observium to monitor traffic that's being handled by a OpenVswitch? We have built an openstack-environment and it's built on openvswitch with neutron, I would love to see the integration to be able to see traffic on OVS-ports. The only option we have today is going zenoss monitoring, from what i've found out there on google atleast. If there's no solution for this I would suggest someone building one as the lack of monitoring openstack and virtualswitches are big. Thanks /Tobias

3 4

no rancid integration
by Ryan Milton 20 Jul '15

20 Jul '15

I attempted the rancid integration from the configuration options. I had a separate rancid configuration that I attempted to modify following the guide that seems to have broken my rancid. Please help. Either I need a way to reverse the effect of this command: php /opt/observium/scripts/generate-rancid.php > /var/lib/rancid/networking/router.db or fix rancid's ability to read the etc/hosts file I now keep getting this in /tmp: -rw-r----- 1 rancid rancid 0 Jul 18 03:45 .networking.run.lock I think my rancid can't read the /etc/hosts or something, because testing clogin results like this: rancid@rancid:/var/lib/rancid/logs$ /usr/lib/rancid/bin/clogin 192.168.80.1 192.168.80.1 spawn telnet 192.168.80.1 Trying 192.168.80.1... Connected to 192.168.80.1. Escape character is '^]'. User Access Verification Username: rancid Password: FP-B-3750-01-TX# FP-B-3750-01-TX#exit Connection closed by foreign host. rancid@rancid:/var/lib/rancid/logs$ /usr/lib/rancid/bin/clogin FP-3750-TX fp-3750-tx spawn telnet fp-3750-tx Trying 192.168.80.1... Connected to FP-3750-TX. Escape character is '^]'. User Access Verification Username: rancid Password: % Login invalid Username: rancid errors in rancid logs (/var/lib/rancid/logs): starting: Sat Jul 18 03:30:01 EDT 2015 Trying to get all of the configs. fp-3750-nj clogin error: Error: Invalid login: fp-3750-nj fp-3750-nj: missed cmd(s): dir /all nvram:,show controllers,dir /all sec-slot0:,dir /all harddiskb:,dir /all harddisk:,dir /all sec-disk2:,dir /all disk2:,dir /all sec-disk1:,dir /all slot2:,show spe version,dir /all slavebootflash:,dir /all sup-bootflash:,dir /all slaveslot0:,show flash,show vtp status,write term,show inventory raw,show vlan-switch,dir /all slavenvram:,show boot,show variables boot,dir /all sup-microcode:,show diagbus,dir /all sec-nvram:,dir /all sec-disk0:,show debug,dir /all bootflash:,show bootvar,dir /all sec-slot1:,dir /all slavedisk2:,show shun,show diag,dir /all slavedisk1:,show c7200,show vlan,dir /all disk0:,dir /all harddiska:,dir /all disk1:,show redundancy secondary,show running-config view full,dir /all slaveslot2:,show env all,dir /all sec-bootflash:,show controllers cbus,show rsp chassis-info,show install active,dir /all slot0:,dir /all slot1:,dir /all sec-slot2:,show gsr chassis,dir /all sup-bootdisk:,show idprom backplane,more system:running-config,show version,show module,dir /all slavedisk0:,show capture,dir /all slavesup-bootflash:,dir /all slaveslot1:,show diag chassis-info,show running-config fp-3750-nj: End of run not found ! fp-3750-tx clogin error: Error: Invalid login: fp-3750-tx fp-3750-tx: missed cmd(s): dir /all slavedisk0:,show controllers cbus,dir /all disk1:,show c7200,show idprom backplane,show diagbus,dir /all nvram:,show boot,show module,dir /all slot2:,dir /all slavedisk1:,dir /all sup-bootdisk:,show rsp chassis-info,dir /all slavebootflash:,dir /all slavesup-bootflash:,dir /all slaveslot1:,show install active,show flash,show inventory raw,show vlan,dir /all sec-disk0:,dir /all sec-disk1:,dir /all sec-nvram:,dir /all slaveslot0:,show spe version,show controllers,dir /all slavenvram:,show bootvar,dir /all disk2:,show env all,dir /all bootflash:,show gsr chassis,dir /all harddiska:,dir /all sec-slot1:,dir /all slot1:,dir /all disk0:,show variables boot,show shun,show diag,show running-config view full,dir /all sec-disk2:,show version,more system:running-config,dir /all sec-slot0:,show diag chassis-info,dir /all sup-bootflash:,write term,dir /all harddisk:,dir /all sec-bootflash:,dir /all slot0:,show capture,show vtp status,show redundancy secondary,show debug,dir /all sec-slot2:,dir /all slavedisk2:,dir /all harddiskb:,show running-config,show vlan-switch,dir /all slaveslot2:,dir /all sup-microcode: fp-3750-tx: End of run not found ! qfx_ex-vc-telx_nj jlogin error: Error: Couldn't login qfx_ex-vc-telx_nj: missed cmd(s): show chassis alarms,show chassis hardware detail,show version detail,show chassis clocks,show chassis fpc detail,show chassis scb,show system core-dumps,show system boot-messages,show chassis routing-engine,show chassis ssb,show chassis cfeb,show chassis feb,show configuration,show chassis sfm detail,show chassis firmware,show system license,show chassis feb detail,show chassis environment qfx_ex-vc-telx_nj: End of run not found # 172.18.5.4 clogin error: Error: TIMEOUT reached 172.18.5.4: missed cmd(s): show running-config,show environment fex all fan,dir usb2:,show version build-info all,show inventory,show module xbar,show boot,term no monitor-force,dir logflash:,show module,show vlan,show system redundancy status,show environment clock,dir bootflash:,show environment fan,show processes log vdc-all,dir slot0:,show version,show license,dir debug:,show vtp status,show license usage,dir volatile:,show environment temperature,show license host-id,show debug,show environment power,dir usb1:,show cores vdc-all 172.18.5.4: End of run not found /usr/bin/tail: cannot open ‘172.18.5.4.new’ for reading: No such file or directory srx-pune jlogin error: Error: Check your password for srx-pune srx-pune: missed cmd(s): show chassis ssb,show chassis routing-engine,show chassis firmware,show chassis scb,show system core-dumps,show version detail,show configuration,show chassis sfm detail,show system license,show chassis hardware detail,show chassis environment,show chassis cfeb,show chassis feb,show chassis fpc detail,show chassis feb detail,show chassis clocks,show system boot-messages,show chassis alarms srx-pune: End of run not found # ipt-nj-asa clogin error: Error: TIMEOUT reached ipt-nj-asa: missed cmd(s): show module,dir /all sec-slot0:,dir /all slot1:,more system:running-config,dir /all slavedisk1:,show spe version,show diag chassis-info,dir /all sec-disk0:,dir /all nvram:,dir /all slavedisk2:,dir /all harddisk:,dir /all sec-bootflash:,show c7200,dir /all slavenvram:,dir /all disk2:,show idprom backplane,show vlan,show diagbus,dir /all slaveslot0:,dir /all sec-slot2:,show redundancy secondary,show install active,show gsr chassis,dir /all sup-bootflash:,show variables boot,dir /all sup-bootdisk:,dir /all harddiskb:,dir /all slot0:,dir /all bootflash:,dir /all slavebootflash:,show boot,dir /all disk0:,show version,dir /all sec-slot1:,show running-config,show capture,show running-config view full,dir /all slaveslot1:,dir /all sec-nvram:,show controllers,dir /all sup-microcode:,dir /all disk1:,dir /all slavedisk0:,show vtp status,dir /all slavesup-bootflash:,dir /all harddiska:,dir /all slaveslot2:,show debug,show rsp chassis-info,show inventory raw,show flash,dir /all sec-disk1:,dir /all sec-disk2:,show controllers cbus,show diag,dir /all slot2:,write term,show bootvar,show vlan-switch,show env all,show shun ipt-nj-asa: End of run not found ipt-tx-asa clogin error: Error: TIMEOUT reached ipt-tx-asa: missed cmd(s): show variables boot,show capture,dir /all disk1:,dir /all slot2:,show install active,dir /all slot1:,dir /all bootflash:,dir /all sup-microcode:,dir /all harddiskb:,show diag,show running-config,dir /all slaveslot1:,show boot,dir /all sup-bootdisk:,show spe version,show vlan,show gsr chassis,dir /all sec-slot2:,show vtp status,show diag chassis-info,dir /all slot0:,dir /all sec-disk2:,show shun,dir /all disk0:,dir /all sec-slot0:,dir /all nvram:,dir /all harddiska:,dir /all sec-disk0:,write term,show rsp chassis-info,dir /all slavedisk1:,show running-config view full,dir /all sec-disk1:,dir /all slavedisk2:,show controllers,dir /all slavebootflash:,show debug,dir /all slavedisk0:,more system:running-config,show bootvar,dir /all sup-bootflash:,show vlan-switch,dir /all slavenvram:,show controllers cbus,show idprom backplane,dir /all sec-nvram:,show c7200,show env all,dir /all sec-slot1:,dir /all sec-bootflash:,dir /all slaveslot2:,dir /all disk2:,show inventory raw,dir /all slaveslot0:,show version,show diagbus,show redundancy secondary,show flash,dir /all harddisk:,show module,dir /all slavesup-bootflash: ipt-tx-asa: End of run not found srx-364 jlogin error: Error: TIMEOUT reached srx-364: missed cmd(s): show chassis routing-engine,show chassis cfeb,show chassis sfm detail,show chassis environment,show chassis feb,show version detail,show chassis scb,show chassis ssb,show chassis alarms,show chassis fpc detail,show chassis feb detail,show configuration,show chassis firmware,show chassis hardware detail,show chassis clocks,show system core-dumps,show system boot-messages,show system license srx-364: End of run not found srx-mx jlogin error: Error: TIMEOUT reached Ryan

3 16

Observium Rocks
by Robert Williams 20 Jul '15

20 Jul '15

Hi, I just wanted to say that Observium rocks. Having just completed 4 weeks of back-to-back network upgrades (replacing most of our core hardware across 4 different sites) we have found Observium invaluable as a means of identifying issues, immediately, for new hardware which has just been installed. As well as spotting BGP sessions with issues, ports with CRC errors, or light levels which are out of scope. Requiring the least information from us, for the most detailed output back to us in return, coupled with a summary of ‘what needs to be fixed’ in a single page. Over the years we have been using it, we have watched it grow from a nice little auto-detecting utility, into an extremely powerful monitoring system. So, rather than posting a bug or feature request, I just thought I’d say thank you to the team who feed into this product. You have saved me from more than one unnecessary headache, in the last 4 weeks alone! Cheers :) Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

3 2

Support for Vibe Voipex?
by Rudolf Hoehler 20 Jul '15

20 Jul '15

Hello Community, Does anyone out their use Vibe technology in their deployments? I am putting feelers out for co-sponsoring the development or co-developing? Please let me know. Regards, Rudolf

1 0

Mailing list archive offline?
by Rudolf Hoehler 20 Jul '15

20 Jul '15

Hi All, The link to the archive on this page - http://www.observium.org/wiki/Mailing_Lists# - points to - https://www.mail-archive.com/observium@observium.org/ - which returns a 404? Just want to confirm that the archive is off line or I'm looking in the wrong place? Rudolf

1 0

printing page looks weird
by Simon Smith 20 Jul '15

20 Jul '15

Hi All, wondered if anyone has seen there printing page to look like this? for some reason I have the Toner graphs first then the Toner table underneath, but under that again is the Pagecounter and Waste Toner Box ? the page looks laid out weird and incorrectly ? what also weird is the toners for my Ricoh MP C400 is all showing as -nan% ??? and the levels as -3% or -2% i have included screenshot showing what i mean Regards Simon

1 0

Dell Compellent / FalconStor / HaProxy
by Falco Schmutz 20 Jul '15

20 Jul '15

Hello, Maybe someone is interested to be paid to add Dell Compellent Storage / FalconStor / Haproxy to observium system. I also need to add Fan information from DELL CMC. Please contact me. Regards, -- ____________________________________________________________________________________________ Falco SCHMUTZ <https://t.yesware.com/tl/43e8266b48d38429119f80eda7ceed0774081fe3/35d5f1ab4…> E-mail : fschmutz(a)premaccess.com Mobile : +33 6 80 22 00 29 Fixe Suisse : +41 44 586 77 74 Fax Suisse : +41 26 347 28 90 Fax France : +33 9 72 12 19 25 premaccess SA Route des Arsenaux 41 - CP 132 CH-1705 Fribourg, Suisse http://www.premaccess.com <https://t.yesware.com/tl/43e8266b48d38429119f80eda7ceed0774081fe3/35d5f1ab4…> <https://t.yesware.com/tl/43e8266b48d38429119f80eda7ceed0774081fe3/35d5f1ab4…> <https://t.yesware.com/tl/43e8266b48d38429119f80eda7ceed0774081fe3/35d5f1ab4…> <https://t.yesware.com/tl/43e8266b48d38429119f80eda7ceed0774081fe3/35d5f1ab4…> ____________________________________________________________________________________________ Attention : le présent message et toutes les pièces jointes sont confidentiels et établis a l'attention exclusive du ou des destinataire(s) indique(s). Toute autre diffusion ou utilisation non autorisée est interdite. Si vous recevez ce message par erreur, veuillez immédiatement en avertir l'expéditeur par e-mail en retour, détruire le message et vous abstenir de toute référence aux informations qui y figurent afin d'éviter les sanctions attachées a la divulgation et a l'utilisation d'informations confidentielles. Les messages électroniques sont susceptibles d'altération. Nous déclinons toute responsabilité en cas d'altération ou de falsification du présent message. Warning : this e-mail and any files attached are confidential and intended solely to the named addressee(s). Any unauthorised dissemination or use is strictly prohibited. If you received this e-mail in error, please immediately notify the sender by reply e-mail and then delete the e-mail from your system. Please do not copy, use or make reference to it for any purpose, or disclose its contents to any person : to do so could expose you to sanctions. E-mails can be altered or falsified. We shall not be liable for any alteration or falsification on this e-mail.

4 4

Thank you all Observium developers.
by Jolyon Ansuz 20 Jul '15

20 Jul '15

Hello all, I’d like to thank the developers of Observium, whomever you are. I’ve run up a VMWare Ubuntu server 14.x with Observium to replace an ageing and unsupported Cacti installation here. We're running Many(TM) core, distribution and edge routers and switches and this install is looking at every port I can get SNMP to. We use Enterasys/Extreme and a couple of Cisco devices. The alpha prototype has moved to beta and people here are liking what they are seeing. Soon, with some more documentation, I’ll elevate this to production. So, whilst I have hundreds of switches to deal with, this means thousands of ports to deal with and as any good lazy administrator, I found it was easier to utilise my database development experience and go straight to the databases, which I now offer to the group as examples, yes Examples(TM) for others to learn from. You will require some database knowledge to grok these. Sincerely, Jolyon Ansuz Senior Network and Communications Administrator Communications Infrastructure Information Technology University of New England Armidale NSW 2351 P: +61 2 6773 3568 M: +61 412 735 836 L: jansuz @ une.edu.au This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of e-mail transmission. If verification is required please request a hard-copy version. "Most of the things worth doing in the world had been declared impossible before they were done.", Louis D. Brandeis

1 0

Future Releases/Integartion
by Janos Farkas 19 Jul '15

19 Jul '15

Hello, Currently we are testing observium pro and would like to know if it would support nsclient and nagios plugins in the future releases, and if not will there be any alternatives for windows agent ? Thank you.

4 6