- observium - lists.observium.org

Incorrect Memory Value
by Zafar Pravaiz 26 May '15

26 May '15

Hi, I have a Dell server with 16gb of RAM but observium show 10g in graph. Is there any issue somewhere? Help appreciated. Thanks

5 4

Observium cloud
by Farshid Abediny 25 May '15

25 May '15

hi I want know can we install observium on 2 server and if one server fail then use our second server for monitoring is it possible? Thanks

6 13

New Community Edition?
by Jama Solomo 25 May '15

25 May '15

Hello! When will the new CE version released? Thank you for your replay. Regards Jama

2 1

presales question
by Farshid Abediny 22 May '15

22 May '15

Hi, i want purchase your professional plan i have some questions : 1. we have our own traffic accounting in your simple api can we check every switch port how much send/receive or total traffic have?or can we set in your traffic accounting that when switch use over X tb per month call a script (our script will create invoice in our billing system) if we can check traffic in + traffic out with your simple api we can create overage invoice in our billing system and we want this, 2. can we create alert that when traffic use near %80 percent of X tb per month send email to user? thanks,

4 12

subscription unsuccessful
by Simon Smith 22 May '15

22 May '15

Hi All, is anybody else having issues buying a subscription i’ve just gone to renew my subscription using the new panel and it has just completely fucked up! 1. enter Companys VAT number, price doesn’t change, still £180 2. just says Thank you for payment and page was blank 3. client area still showing no subscription 4. Paddle have even taken the money from my bank! any help would be much helpful, or who do i need to contact over this issue because i require a VAT invoice for works expenses Regards Simon - Hestor Ltd

2 4

Observium Installation
by Mouri Tania 21 May '15

21 May '15

Dear concern, We have installed "Observium" from this link http://www.observium.org/wiki/RHEL_Installation and installed properly how to instruct here. After full installation "service httpd" status is failed. Please share any solution of this problem if you can and it would be very grateful for us . Best Regards/ Mouri Tania Engineer, Service Operation Center Bangla Trac Communications Limited

7 10

some queston before purchase
by Farshid Abediny 19 May '15

19 May '15

Hi, i want purchase your professional plan i have some questions : 1. we have our own traffic accounting in your simple api can we check every switch port how much send/receive or total traffic have?or can we set in your traffic accounting that when switch use over X tb per month call a script (our script will create invoice in our billing system) if we can check traffic in + traffic out with your simple api we can create overage invoice in our billing system and we want this, 2. can we create alert that when traffic use near %80 percent of X tb per month send email to user? thanks,

1 0

Friendly Names for Ports
by Kenneth Eisner 19 May '15

19 May '15

I checked the Observium netiquette - I did not see a "please do not repost questions." - If I'm breaking an unwritten rule then I do apologize. Does anyone know if there is a way to apply a friendly name to ports? It does not appear possible in the Community Edition front end, however, is it possible to do this via the database? Thanks, -knme

7 13

poller-wrapper and python3
by Mike Stupalov 18 May '15

18 May '15

Hi, some modern system (like ubuntu 15.04) used python3 by default. Since old poller-wrapper not compatible with python3, today I added experimental *poller-wrapper3.py* which should work with both (2.x, 3.x) python versions. Check wich default python version used in your system: /usr/bin/env python -V Python 3.2.3 If default is 3.x, than use new wrapper in your crontab. Note, in python3 required additional PyMySQL module (since MySQLdb unavialable for python3). In ubuntu/debian install by this cmds: sudo apt-get install python3-setuptools sudo easy_install3 pip sudo pip3 install PyMySQL How to install on other systems I do not know, welcome your tips. -- Mike Stupalov http://observium.org

1 0

kvm libvert
by Daniel Rolfe 16 May '15

16 May '15

Hi, I've added the below to my config Other than libvirt-bin what do I need ? Keyless ssh ? Unix agent ? Regards Daniel

2 1

What SHA and AES does Observium use?
by Henry Collins 15 May '15

15 May '15

What are the key lengths of these algorithms that Observium uses? I have some firewalls, which require to set explicitly which algorithm they have to communicate with Observium. However, I cannot make it work, even though I tried all the key lengths on my firewalls. I am having trouble using SNMP v3 on the following devices: HardwareSummit X440-48tOperating SystemExtreme XOS 15.3.1.4 patch1-19 (nossh) HardwareSummit X440-24tOperating SystemExtreme XOS 15.3.1.4 patch1-19 (nossh) HardwareSummit Stack V2Operating SystemExtreme XOS 15.3.1.4 patch1-41 (nossh) HardwareASA5515Operating SystemCisco ASA 9.2(2)4 Observium does report that it could not authenticate. SNMP v2c works though.

3 2

How to get the same number of graphs on both Windows and Linux machines?
by Henry Collins 15 May '15

15 May '15

I have a number of Windows and Linux machines, which communicate with Observium server. Linux machines report way more information than Windows. Is it possible to get more data from Windows machines? The following data I get from Windows machines (System tab for example): Running Processes Users Logged In Memory Pool Usage Processors Filesystem Usage Device Uptime The following data I get from Linux machines (System tab again): Running Processes Users Logged In Memory Pool Usage Processors Filesystem Usage Context Switches Detailed Processors System Interrupts System I/O Activity Load Averages Detailed Memory Swap I/O Activity Device Uptime I use NET-SNMP on Linux machines and NuDesign SNMPv3 Master Agent Service on Windows machines.

2 1

alert_checker
by Jeffrey d'Ambly 15 May '15

15 May '15

Is there a not match supported in alert checkers? —Jeff

2 1

links in alerts
by Jeffrey d'Ambly 15 May '15

15 May '15

Is there an option for setting the FQDN of the server in email alerts? —Jeff

2 1

Alert Contacts Front End
by Thomas Nicholson 14 May '15

14 May '15

Hi All, Is there a web front end for adding alert contacts and assigning contacts to alerts? I can get it working my manually adding entries in the database, just wondered if there was a GUI that I was missing. Cheers, Tom

3 6

How to get revised SNMP settings from existing devices
by Mike Driscoll 14 May '15

14 May '15

I’ve been updating parameters in some Cisco switches such as snmp-server location and snmp-server contact. But I don’t see these changes reflected in existing devices. Is there anything else I should do?

3 2

new obs server
by Jeffrey d'Ambly 13 May '15

13 May '15

I just installed a new obs server using the professional edition. For some reason all my graphs are empty. I think this maybe due to rrdcached, but I have no idea why. Also when I run the poller in debug mode I saw some SQL errors? Is this something I should be concerned about? Also found this in /var/log/messages May 12 22:23:17 sjc-corp-net01 rrdcached[2470]: queue_thread_main: rrd_update_r (/opt/observium/rrd/nj-wan01/port-13.rrd) failed with status -1. (/opt/observium/rrd/nj-wan01/port-13.rrd: not a simple signed integer: '1.844674407371E+19') May 12 22:25:03 sjc-corp-net01 rrdcached[2470]: queue_thread_main: rrd_update_r (/opt/observium/rrd/nj-wan01/port-13.rrd) failed with status -1. (/opt/observium/rrd/nj-wan01/port-13.rrd: not a simple signed integer: '1.844674407371E+19') May 12 22:30:27 sjc-corp-net01 rrdcached[2470]: queue_thread_main: rrd_update_r (/opt/observium/rrd/nj-wan01/port-13.rrd) failed with status -1. (/opt/observium/rrd/nj-wan01/port-13.rrd: not a simple signed integer: '1.844674407371E+19') SQL[SELECT * FROM `cef_switching` WHERE `device_id` = '63' AND `entPhysicalIndex = '7051' AND `afi` = 'ipv4' AND `cef_index` = '1'] RUNTIME[0.00008607s] ERROR[Error in query: (1064) You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'afi` = 'ipv4' AND `cef_index` = '1'' at line 1] RRD /opt/observium/rrd/nj-wan01/cefswitching-7051-ipv4-1.rrd already exists - no need to create. SQL[UPDATE `cef_switching` set `drop` ='0',`punt` ='0',`punt2host` ='0',`drop_prev` ='',`punt_prev` ='',`punt2host_prev` ='',`updated` ='1431494692',`updated_prev` ='' WHERE `device_id` = '63' AND `entPhysicalIndex` = '7051' AND `afi` = 'ipv4' AND `cef_index` = '1'] RUNTIME[0.00063586s] RRD[cmd[update /opt/observium/rrd/nj-wan01/cefswitching-7051-ipv4-1.rrd N:0:0:0 --daemon unix:/var/rrdtool/rrdcached/rrdcached.sock] stdout[OK u:0.00 s:0.02 r:56.10] stderr[]] | |-2: RP LES SQL[SELECT * FROM `cef_switching` WHERE `device_id` = '63' AND `entPhysicalIndex = '7051' AND `afi` = 'ipv4' AND `cef_index` = '2'] RUNTIME[0.00007796s] ERROR[Error in query: (1064) You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'afi` = 'ipv4' AND `cef_index` = '2'' at line 1] RRD /opt/observium/rrd/nj-wan01/cefswitching-7051-ipv4-2.rrd already exists - no need to create. SQL[UPDATE `cef_switching` set `drop` ='0',`punt` ='395367',`punt2host` ='1150',`drop_prev` ='',`punt_prev` ='',`punt2host_prev` ='',`updated` ='1431494692',`updated_prev` ='' WHERE `device_id` = '63' AND `entPhysicalIndex` = '7051' AND `afi` = 'ipv4' AND `cef_index` = '2'] RUNTIME[0.00068498s] RRD[cmd[update /opt/observium/rrd/nj-wan01/cefswitching-7051-ipv4-2.rrd N:0:395367:1150 --daemon unix:/var/rrdtool/rrdcached/rrdcached.sock] stdout[OK u:0.00 s:0.02 r:56.11] stderr[]] |- ipv6 RRD /opt/observium/rrd/nj-wan01/cef-pfx-7051-ipv6.rrd already exists - no need to create. SQL[UPDATE `cef_prefix` set `cef_pfx` ='' WHERE `device_id` = '63' AND `entPhysicalIndex` = '7051' AND `afi` = 'ipv6'] RUNTIME[0.00073409s] RRD[cmd[update /opt/observium/rrd/nj-wan01/cef-pfx-7051-ipv6.rrd N:U --daemon unix:/var/rrdtool/rrdcached/rrdcached.sock] stdout[OK u:0.00 s:0.02 r:56.11] stderr[]] | |-1: RP LES SQL[SELECT * FROM `cef_switching` WHERE `device_id` = '63' AND `entPhysicalIndex = '7051' AND `afi` = 'ipv6' AND `cef_index` = '1'] RUNTIME[0.00008082s] ERROR[Error in query: (1064) You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'afi` = 'ipv6' AND `cef_index` = '1'' at line 1] RRD /opt/observium/rrd/nj-wan01/cefswitching-7051-ipv6-1.rrd already exists - no need to create. SQL[UPDATE `cef_switching` set `drop` ='0',`punt` ='0',`punt2host` ='0',`drop_prev` ='',`punt_prev` ='',`punt2host_prev` ='',`updated` ='1431494692',`updated_prev` ='' WHERE `device_id` = '63' AND `entPhysicalIndex` = '7051' AND `afi` = 'ipv6' AND `cef_index` = '1'] RUNTIME[0.00065994s] RRD[cmd[update /opt/observium/rrd/nj-wan01/cefswitching-7051-ipv6-1.rrd N:0:0:0 --daemon unix:/var/rrdtool/rrdcached/rrdcached.sock] stdout[OK u:0.00 s:0.02 r:56.11] stderr[]]

4 5

Observium and ATM ?
by Jerome SCHEVINGT 13 May '15

13 May '15

Hi Does Observium support ATM on cisco ? because i see the first card: ATM1/0 but not all sub interface regards jerome

6 9

Observium Subscription Invoice
by Meyer, Florian 13 May '15

13 May '15

Hi, is it possible to get an invoice for the purchased subscription? I purchased the subscription via my personal credit card and have to get my money back from my employer, but they need an invoice. Thanks for any help! Mit freundlichen Grüßen i. A. Florian Meyer Team Infrastruktur/Systeme Universitätsmedizin Rostock Dezernat IT Postfach 10 08 88 18055 Rostock Tel.: +49 (0) 381 / 494 3364 Fax: +49 (0) 381 / 494 3302

2 1

Fortigate Sessions Graph Patch
by Nathan Phelan 12 May '15

12 May '15

Hi Basile, Thanks for that patch; that fixed it up for us. Would be great to see that included in Observium soon. Cheers, Nathan From: observium [mailto:observium-bounces@observium.org] On Behalf Of Basile Bluntschli Sent: Saturday, 9 May 2015 5:26 AM To: Observium Network Observation System Subject: Re: [Observium] Fortigate Ports Disappeared Hi Serghei I have no idea how to apply a svn diff file to an existing file. I just followed the instructions on the Observium website on how to submit a patch :) I would need to use google as well... Else you could manually edit the fortigate.inc.pcp file, the patch provides something like three or four lines of code change... That should be doable as well. Kind regards Basile 2015-05-08 16:42 GMT+02:00 Serghei Golipad <s.golipad(a)kelway.com<mailto:s.golipad@kelway.com>>: Hi Basile, Am I doing something wrong here? observ01:/opt/observium/includes/polling/os# patch -p1 < r6384.patch can't find file to patch at input line 5 Perhaps you used the wrong -p or --strip option? The text leading up to this was: -------------------------- |Index: fortigate.inc.php |=================================================================== |--- fortigate.inc.php (revision 6384) |+++ fortigate.inc.php (working copy) -------------------------- File to patch: fortigate.inc.php patching file fortigate.inc.php Hunk #1 FAILED at 11. patch unexpectedly ends in middle of line Hunk #2 FAILED at 23. 2 out of 2 hunks FAILED -- saving rejects to file fortigate.inc.php.rej root@uk1soc-observ01:/opt/observium/includes/polling/os# From: observium [mailto:observium-bounces@observium.org<mailto:observium-bounces@observium.org>] On Behalf Of Basile Bluntschli Sent: 08 May 2015 15:34 To: Observium Network Observation System Subject: Re: [Observium] Fortigate Ports Disappeared Hi Serghei Fortigate CPU was fixed somewhere in August 2014. The same change broke back then the Firewall Session counter. You may want to update to the current svn version? And then reapply my patch? This should work. Kind regards Basile 2015-05-08 15:23 GMT+02:00 Serghei Golipad <s.golipad(a)kelway.com<mailto:s.golipad@kelway.com>>: Hi Basile, I’ve tried that one, patch fails. Are you able to send a copy of your fortigate.php.inc? P.S does it fix CPU graphs too? Also any reason why there’s CPU and Processor graphs? Thanks From: observium [mailto:observium-bounces@observium.org<mailto:observium-bounces@observium.org>] On Behalf Of Basile Bluntschli Sent: 08 May 2015 13:57 To: Observium Network Observation System Subject: Re: [Observium] Fortigate Ports Disappeared Hi Serghei there is a patch here: http://jira.observium.org/browse/OBSERVIUM-1278?jql= It works for me... You can try it on your own risk :) Kind regards Basile 2015-05-08 10:22 GMT+02:00 Serghei Golipad <s.golipad(a)kelway.com<mailto:s.golipad@kelway.com>>: Hi Nathan, That was spot on :D thank you very much! This problem was been screwing our traffic accounting graphs and causing all sorts of aggravation ☺ We are on: v5.0,build3608,140409 (GA Patch 7) time to upgrade, I know. P.S if only there was a fix to sessions being graphed ☹ Cheers From: observium [mailto:observium-bounces@observium.org<mailto:observium-bounces@observium.org>] On Behalf Of Nathan Phelan Sent: 08 May 2015 05:58 To: Observium Network Observation System Subject: Re: [Observium] Fortigate Ports Disappeared Hi Serghei, This is an issue we have run into several times. Every time it has been due to a SNMPD bug on the fortigates. There is an issue with several firmware versions that returns invalid values for interfaces that have been recently deleted (usually vlan subinterfaces or ipsec interfaces). When this has happened snmp on the fortigates will still return values for everything apart from anything referencing the deleted interface (which is still in snmp somewhere). I have logged a ticket with Fortinet about this (in Feb 2014) and it is supposed to be fixed in newer firmware versions (although I have seen it crop up again on ‘fixed’ versions). When it is in this state snmpwalk actually fails the following query snmpwalk -v2c -c public fortigateIPAddress ifType Error in packet. Reason: (genError) A general failure occured Failed object: IF-MIB::ifType.45 (in this example 45 was snmp index of the deleted interface). The fix for us has always been to kill and restart snmpd on the Fortigate (on all cluster members if it is a cluster). You’ll need to find the process ID of the snmpd process and then kill it; watchdog will automatically restart it and then it’ll be fine. show running processes diag sys top 30 99 kill snmpd process by process id diag sys kill 11 <process ID> I don’t remember if you have to do a discovery after this or if it will return to normal on the next polling cycle. Interested to hear if this solves it for you – also interested to hear what firmware version you are seeing this on. Cheers, Nathan From: observium [mailto:observium-bounces@observium.org] On Behalf Of Serghei Golipad Sent: Friday, 8 May 2015 1:17 AM To: Observium Network Observation System Subject: Re: [Observium] Fortigate Ports Disappeared Hi Adam, Anything I should be looking for in the debug? I can see ifNames correctly displayed during debug however those don’t make it into portal. Also in event log I get below for all discovered ports: Interface changed: [ifDescr] TEST_PORT -> NULL; [ifType] other -> NULL; [ifDuplex] -> 0 One of the things I’ve picked up from poller debug: ignored (by empty ifDescr and ifName). Thanks From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 07 May 2015 15:45 To: observium(a)observium.org<mailto:observium@observium.org> Subject: Re: [Observium] Fortigate Ports Disappeared snmpwalk doesn't prove anything, since we don't use snmpwalk. Checking the output from the poller module running in debug might, though. ./poller.php -h <host> -m ports -d adam. Sent from Mailbird<http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campai…> On 07/05/2015 15:38:44, Serghei Golipad <s.golipad(a)kelway.com<mailto:s.golipad@kelway.com>> wrote: Hi Everyone, Has anyone else had this problem? All of a sudden some of the critical ports have disappeared, first though it was SNMP process crash on the firewall however simple snmpwalk proves that’s not the case. I then deleted device including RRDs and re-added, now none of the ports are showing ☹ I’m on 6404. Thanks PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. Kelway Ltd is a Company registered in England and Wales. This email is sent for and on behalf of Kelway Holdings Limited. Kelway Holdings Limited is the UK holding company for Kelway Limited trading as Kelway. The registered office for Kelway Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than Kelway or the sender of its existence. For more information about Kelway please visit www.kelway.com<http://www.kelway.com> _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

New Observium Installation => Graphs Ok but no data
by Jerome SCHEVINGT 11 May '15

11 May '15

Hi i have installed Observium from svn and he work but all graphs is at 0 i see the graph but In: -nan Out: -nan where is my error ? thanks jerome

1 0

[OBSERVIUM-906] abnormal value for the alert duration on observium alerts
by Supun Rathnayake 11 May '15

11 May '15

Hi , Wondering whether the Observium team would be looking into this issue http://jira.observium.org/browse/OBSERVIUM-906 -- With Best Regards, Supun Rathnayake Lanka communication Services (Pvt) Ltd. 65C, Dharmapala Mawatha, Colombo 07. Sri Lanka. Tel: +94-11-2437545 http://www.lankacom.net

1 0

Not showing ports on Juniper EX4200
by Stephen Bateman 10 May '15

10 May '15

Hi Everyone, I have just added a Juniper EX4200 to my kit then added it into Observium, however for some reason it does not list the ports. The JunOS is the same version as my other switches which are fine and if I discover the switch manually on CLI by device ID it appears to retrieve them fine. I have checked the SNMP config of the device against my other ones and they are the same so assume it is maybe something else. Any tips on how to resolve this would be appreciated. Stephen Discovery Output is as follows... Module [ os ] time: 0.0334s Ports : X dsc(5)[] lo0(6)[] tap(7)[] gre(8)[] ipip(9)[] pime(10)[] pimd(11)[] mtun(12)[] lo0.0(16)[] lo0.16384(21)[] me0(33)[] me0.0(34)[] vme(35)[] vme.0(36)[] bme0(37)[] bme0.32768(38)[] bme0.32770(40)[] vcp-0(49)[] vcp-0.32768(50)[] vcp-1(51)[] vcp-1.32768(52)[] vlan(501)[] ge-0/0/0(502)[] ge-0/0/0.0(503)[] ge-0/0/1(504)[] ge-0/0/1.0(505)[] ge-0/0/2(506)[] ge-0/0/2.0(507)[] ge-0/0/3(508)[] ge-0/0/3.0(509)[] ge-0/0/4(510)[] ge-0/0/4.0(511)[] ge-0/0/5(512)[] ge-0/0/5.0(513)[] ge-0/0/6(514)[] ge-0/0/7(515)[] ge-0/0/6.0(516)[] ge-0/0/7.0(517)[] ge-0/0/8(518)[] ge-0/0/8.0(519)[] ge-0/0/9(520)[] ge-0/0/9.0(521)[] ge-0/0/10(522)[] ge-0/0/11(523)[] ge-0/0/10.0(524)[] ge-0/0/11.0(525)[] ge-0/0/12(526)[] ge-0/0/12.0(527)[] ge-0/0/13(528)[] ge-0/0/14(529)[] ge-0/0/13.0(530)[] ge-0/0/14.0(531)[] ge-0/0/15(532)[] ge-0/0/15.0(533)[] ge-0/0/16(534)[] ge-0/0/16.0(535)[] ge-0/0/17(536)[] ge-0/0/17.0(537)[] ge-0/0/18(538)[] ge-0/0/18.0(539)[] ge-0/0/19(540)[] ge-0/0/20(541)[] ge-0/0/19.0(542)[] ge-0/0/20.0(543)[] ge-0/0/21(544)[] ge-0/0/21.0(545)[] ge-0/0/22(546)[] ge-0/0/23(547)[] ge-0/0/22.0(548)[] ge-0/0/23.0(549)[] ge-0/0/24(550)[] ge-0/0/24.0(551)[] ge-0/0/25(552)[] ge-0/0/25.0(553)[] ge-0/0/26(554)[] ge-0/0/26.0(555)[] ge-0/0/27(556)[] ge-0/0/27.0(557)[] ge-0/0/28(558)[] ge-0/0/28.0(559)[] ge-0/0/29(560)[] ge-0/0/30(561)[] ge-0/0/31(562)[] ge-0/0/29.0(563)[] ge-0/0/30.0(564)[] ge-0/0/31.0(565)[] ge-0/0/32(566)[] ge-0/0/32.0(567)[] ge-0/0/33(568)[] ge-0/0/34(569)[] ge-0/0/33.0(570)[] ge-0/0/34.0(571)[] ge-0/0/35(572)[] ge-0/0/35.0(573)[] ge-0/0/36(574)[] ge-0/0/37(575)[] ge-0/0/36.0(576)[] ge-0/0/37.0(577)[] ge-0/0/38(578)[] ge-0/0/38.0(579)[] ge-0/0/39(580)[] ge-0/0/40(581)[] ge-0/0/39.0(582)[] ge-0/0/40.0(583)[] ge-0/0/41(584)[] ge-0/0/41.0(585)[] ge-0/0/42(586)[] ge-0/0/43(587)[] ge-0/0/44(588)[] ge-0/0/42.0(589)[] ge-0/0/43.0(590)[] ge-0/0/44.0(591)[] ge-0/0/45(592)[] ge-0/0/45.0(593)[] ge-0/0/46(594)[] ge-0/0/46.0(595)[] xe-0/1/0(598)[] xe-0/1/0.0(599)[] vlan.0(600)[] gr-0/0/47(603)[] gr-0/0/47.0(604)[] vlan.100(605)[] vlan.199(606)[] vlan.302(607)[] vlan.304(608)[] Module [ ports ] time: 1.5604s Port Stacks: .................................................................................................................................................................................................... Module [ ports-stack ] time: 0.6286s Processors : JUNIPER-MIB .. JUNIPER-SRX5000-SPU-MONITORING-MIB hrDevice: Module [ processors ] time: 0.9984s Memory : JUNIPER-MIB .. JUNIPER-SRX5000-SPU-MONITORING-MIB HOST-RESOURCES-MIB Module [ mempools ] time: 1.4283s IPv4 Addresses : Module [ ipv4-addresses ] time: 0.1158s IPv6 Addresses : Module [ ipv6-addresses ] time: 0.2653s Sensors & Status: JUNIPER-MIB .. JUNIPER-ALARM-MIB .. JUNIPER-DOM-MIB Module [ sensors ] time: 2.644s Storage : HOST-RESOURCES-MIB ...... Module [ storage ] time: 0.052s Inventory : JUNIPER-MIB HOST-RESOURCES-MIB Module [ inventory ] stats: 11 added Module [ inventory ] time: 2.9178s Discovery protocols: LLDP-MIB CISCO-CDP-MIB Module [ discovery-protocols ] time: 0.2521s OSPF Neighbours: Module [ ospf-autodiscovery ] time: 0.0655s ARP/NDP Tables : Module [ arp-table ] time: 0.3335s Module [ junose-atm-vp ] time: 0.0003s BGP Sessions: BGP4-V2-MIB-JUNIPER No BGP on host Module [ bgp-peers ] time: 0.0221s VLANs: Q-BRIDGE-MIB 0 100 199 302 304 Module [ vlans ] stats: 0[V+] 100[V+] 199[V+] 302[V+] 304[V+] Module [ vlans ] time: 0.4547s Module [ mac-accounting ] time: 0.0003s Pseudowires : PW-STD-MIB Module [ pseudowires ] time: 0.0388s VRFs : Module [ cisco-vrf ] time: 0.1992s Module [ cisco-sla ] time: 0.0006s Module [ vmware-vminfo ] time: 0.0005s Cisco Class-based QoS: QoS not configured. Module [ cisco-cbqos ] time: 0.1115s Module [ libvirt-vminfo ] time: 0.0005s Module [ toner ] time: 0.0004s UCD Disk IO : Module [ ucd-diskio ] time: 0.0379s Wifi: Module [ wifi ] time: 0.0088s Module [ graphs ] time: 0.0072s Device [ ahostnamehere ] discovered in 12.18 seconds Memory usage: 5MB (peak: 5.25MB) MySQL: Cell[349/0.17s] Row[150/0.11s] Rows[10/0.01s] Column[0/0s] Update[1/0s] Insert[144/0.15s] Delete[0/0s]

2 1

The system doesn't show graphics
by Monico Briseño 09 May '15

09 May '15

I installed Observium on Ubuntu server. I followed all instructions available on the Observium web. However, the system doesn't show any kind of graphics. Also, I want to add a new Linux device with snmp v2 client installed, the system can't reached with the v2c features. Finally, I attached a screenshot of the linux server I could add it using CLI. Any ideas? TIA -- -- http://www.cobaej.edu.mx/cobaejweb/FLASH/bannerbvc.swf -- <http://www.cobaej.edu.mx/cobaejweb/FLASH/bannerbvc.swf>

2 1

Fortigate Ports Disappeared
by Serghei Golipad 08 May '15

08 May '15

Hi Everyone, Has anyone else had this problem? All of a sudden some of the critical ports have disappeared, first though it was SNMP process crash on the firewall however simple snmpwalk proves that's not the case. I then deleted device including RRDs and re-added, now none of the ports are showing :( [cid:image001.png@01D088DB.DC99D9B0] I'm on 6404. Thanks PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. Kelway (UK) Ltd is a Company registered in England and Wales. This email is sent for and on behalf of Kelway Holdings Limited. Kelway Holdings Limited is the UK holding company for Kelway (UK) Limited trading as Kelway. The registered office for Kelway Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than Kelway or the sender of its existence. For more information about Kelway please visit www.kelway.co.uk

4 9