- observium - lists.observium.org

new obs server
by Jeffrey d'Ambly 13 May '15

13 May '15

I just installed a new obs server using the professional edition. For some reason all my graphs are empty. I think this maybe due to rrdcached, but I have no idea why. Also when I run the poller in debug mode I saw some SQL errors? Is this something I should be concerned about? Also found this in /var/log/messages May 12 22:23:17 sjc-corp-net01 rrdcached[2470]: queue_thread_main: rrd_update_r (/opt/observium/rrd/nj-wan01/port-13.rrd) failed with status -1. (/opt/observium/rrd/nj-wan01/port-13.rrd: not a simple signed integer: '1.844674407371E+19') May 12 22:25:03 sjc-corp-net01 rrdcached[2470]: queue_thread_main: rrd_update_r (/opt/observium/rrd/nj-wan01/port-13.rrd) failed with status -1. (/opt/observium/rrd/nj-wan01/port-13.rrd: not a simple signed integer: '1.844674407371E+19') May 12 22:30:27 sjc-corp-net01 rrdcached[2470]: queue_thread_main: rrd_update_r (/opt/observium/rrd/nj-wan01/port-13.rrd) failed with status -1. (/opt/observium/rrd/nj-wan01/port-13.rrd: not a simple signed integer: '1.844674407371E+19') SQL[SELECT * FROM `cef_switching` WHERE `device_id` = '63' AND `entPhysicalIndex = '7051' AND `afi` = 'ipv4' AND `cef_index` = '1'] RUNTIME[0.00008607s] ERROR[Error in query: (1064) You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'afi` = 'ipv4' AND `cef_index` = '1'' at line 1] RRD /opt/observium/rrd/nj-wan01/cefswitching-7051-ipv4-1.rrd already exists - no need to create. SQL[UPDATE `cef_switching` set `drop` ='0',`punt` ='0',`punt2host` ='0',`drop_prev` ='',`punt_prev` ='',`punt2host_prev` ='',`updated` ='1431494692',`updated_prev` ='' WHERE `device_id` = '63' AND `entPhysicalIndex` = '7051' AND `afi` = 'ipv4' AND `cef_index` = '1'] RUNTIME[0.00063586s] RRD[cmd[update /opt/observium/rrd/nj-wan01/cefswitching-7051-ipv4-1.rrd N:0:0:0 --daemon unix:/var/rrdtool/rrdcached/rrdcached.sock] stdout[OK u:0.00 s:0.02 r:56.10] stderr[]] | |-2: RP LES SQL[SELECT * FROM `cef_switching` WHERE `device_id` = '63' AND `entPhysicalIndex = '7051' AND `afi` = 'ipv4' AND `cef_index` = '2'] RUNTIME[0.00007796s] ERROR[Error in query: (1064) You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'afi` = 'ipv4' AND `cef_index` = '2'' at line 1] RRD /opt/observium/rrd/nj-wan01/cefswitching-7051-ipv4-2.rrd already exists - no need to create. SQL[UPDATE `cef_switching` set `drop` ='0',`punt` ='395367',`punt2host` ='1150',`drop_prev` ='',`punt_prev` ='',`punt2host_prev` ='',`updated` ='1431494692',`updated_prev` ='' WHERE `device_id` = '63' AND `entPhysicalIndex` = '7051' AND `afi` = 'ipv4' AND `cef_index` = '2'] RUNTIME[0.00068498s] RRD[cmd[update /opt/observium/rrd/nj-wan01/cefswitching-7051-ipv4-2.rrd N:0:395367:1150 --daemon unix:/var/rrdtool/rrdcached/rrdcached.sock] stdout[OK u:0.00 s:0.02 r:56.11] stderr[]] |- ipv6 RRD /opt/observium/rrd/nj-wan01/cef-pfx-7051-ipv6.rrd already exists - no need to create. SQL[UPDATE `cef_prefix` set `cef_pfx` ='' WHERE `device_id` = '63' AND `entPhysicalIndex` = '7051' AND `afi` = 'ipv6'] RUNTIME[0.00073409s] RRD[cmd[update /opt/observium/rrd/nj-wan01/cef-pfx-7051-ipv6.rrd N:U --daemon unix:/var/rrdtool/rrdcached/rrdcached.sock] stdout[OK u:0.00 s:0.02 r:56.11] stderr[]] | |-1: RP LES SQL[SELECT * FROM `cef_switching` WHERE `device_id` = '63' AND `entPhysicalIndex = '7051' AND `afi` = 'ipv6' AND `cef_index` = '1'] RUNTIME[0.00008082s] ERROR[Error in query: (1064) You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'afi` = 'ipv6' AND `cef_index` = '1'' at line 1] RRD /opt/observium/rrd/nj-wan01/cefswitching-7051-ipv6-1.rrd already exists - no need to create. SQL[UPDATE `cef_switching` set `drop` ='0',`punt` ='0',`punt2host` ='0',`drop_prev` ='',`punt_prev` ='',`punt2host_prev` ='',`updated` ='1431494692',`updated_prev` ='' WHERE `device_id` = '63' AND `entPhysicalIndex` = '7051' AND `afi` = 'ipv6' AND `cef_index` = '1'] RUNTIME[0.00065994s] RRD[cmd[update /opt/observium/rrd/nj-wan01/cefswitching-7051-ipv6-1.rrd N:0:0:0 --daemon unix:/var/rrdtool/rrdcached/rrdcached.sock] stdout[OK u:0.00 s:0.02 r:56.11] stderr[]]

4 5

Observium and ATM ?
by Jerome SCHEVINGT 13 May '15

13 May '15

Hi Does Observium support ATM on cisco ? because i see the first card: ATM1/0 but not all sub interface regards jerome

6 9

Observium Subscription Invoice
by Meyer, Florian 13 May '15

13 May '15

Hi, is it possible to get an invoice for the purchased subscription? I purchased the subscription via my personal credit card and have to get my money back from my employer, but they need an invoice. Thanks for any help! Mit freundlichen Grüßen i. A. Florian Meyer Team Infrastruktur/Systeme Universitätsmedizin Rostock Dezernat IT Postfach 10 08 88 18055 Rostock Tel.: +49 (0) 381 / 494 3364 Fax: +49 (0) 381 / 494 3302

2 1

Fortigate Sessions Graph Patch
by Nathan Phelan 12 May '15

12 May '15

Hi Basile, Thanks for that patch; that fixed it up for us. Would be great to see that included in Observium soon. Cheers, Nathan From: observium [mailto:observium-bounces@observium.org] On Behalf Of Basile Bluntschli Sent: Saturday, 9 May 2015 5:26 AM To: Observium Network Observation System Subject: Re: [Observium] Fortigate Ports Disappeared Hi Serghei I have no idea how to apply a svn diff file to an existing file. I just followed the instructions on the Observium website on how to submit a patch :) I would need to use google as well... Else you could manually edit the fortigate.inc.pcp file, the patch provides something like three or four lines of code change... That should be doable as well. Kind regards Basile 2015-05-08 16:42 GMT+02:00 Serghei Golipad <s.golipad(a)kelway.com<mailto:s.golipad@kelway.com>>: Hi Basile, Am I doing something wrong here? observ01:/opt/observium/includes/polling/os# patch -p1 < r6384.patch can't find file to patch at input line 5 Perhaps you used the wrong -p or --strip option? The text leading up to this was: -------------------------- |Index: fortigate.inc.php |=================================================================== |--- fortigate.inc.php (revision 6384) |+++ fortigate.inc.php (working copy) -------------------------- File to patch: fortigate.inc.php patching file fortigate.inc.php Hunk #1 FAILED at 11. patch unexpectedly ends in middle of line Hunk #2 FAILED at 23. 2 out of 2 hunks FAILED -- saving rejects to file fortigate.inc.php.rej root@uk1soc-observ01:/opt/observium/includes/polling/os# From: observium [mailto:observium-bounces@observium.org<mailto:observium-bounces@observium.org>] On Behalf Of Basile Bluntschli Sent: 08 May 2015 15:34 To: Observium Network Observation System Subject: Re: [Observium] Fortigate Ports Disappeared Hi Serghei Fortigate CPU was fixed somewhere in August 2014. The same change broke back then the Firewall Session counter. You may want to update to the current svn version? And then reapply my patch? This should work. Kind regards Basile 2015-05-08 15:23 GMT+02:00 Serghei Golipad <s.golipad(a)kelway.com<mailto:s.golipad@kelway.com>>: Hi Basile, I’ve tried that one, patch fails. Are you able to send a copy of your fortigate.php.inc? P.S does it fix CPU graphs too? Also any reason why there’s CPU and Processor graphs? Thanks From: observium [mailto:observium-bounces@observium.org<mailto:observium-bounces@observium.org>] On Behalf Of Basile Bluntschli Sent: 08 May 2015 13:57 To: Observium Network Observation System Subject: Re: [Observium] Fortigate Ports Disappeared Hi Serghei there is a patch here: http://jira.observium.org/browse/OBSERVIUM-1278?jql= It works for me... You can try it on your own risk :) Kind regards Basile 2015-05-08 10:22 GMT+02:00 Serghei Golipad <s.golipad(a)kelway.com<mailto:s.golipad@kelway.com>>: Hi Nathan, That was spot on :D thank you very much! This problem was been screwing our traffic accounting graphs and causing all sorts of aggravation ☺ We are on: v5.0,build3608,140409 (GA Patch 7) time to upgrade, I know. P.S if only there was a fix to sessions being graphed ☹ Cheers From: observium [mailto:observium-bounces@observium.org<mailto:observium-bounces@observium.org>] On Behalf Of Nathan Phelan Sent: 08 May 2015 05:58 To: Observium Network Observation System Subject: Re: [Observium] Fortigate Ports Disappeared Hi Serghei, This is an issue we have run into several times. Every time it has been due to a SNMPD bug on the fortigates. There is an issue with several firmware versions that returns invalid values for interfaces that have been recently deleted (usually vlan subinterfaces or ipsec interfaces). When this has happened snmp on the fortigates will still return values for everything apart from anything referencing the deleted interface (which is still in snmp somewhere). I have logged a ticket with Fortinet about this (in Feb 2014) and it is supposed to be fixed in newer firmware versions (although I have seen it crop up again on ‘fixed’ versions). When it is in this state snmpwalk actually fails the following query snmpwalk -v2c -c public fortigateIPAddress ifType Error in packet. Reason: (genError) A general failure occured Failed object: IF-MIB::ifType.45 (in this example 45 was snmp index of the deleted interface). The fix for us has always been to kill and restart snmpd on the Fortigate (on all cluster members if it is a cluster). You’ll need to find the process ID of the snmpd process and then kill it; watchdog will automatically restart it and then it’ll be fine. show running processes diag sys top 30 99 kill snmpd process by process id diag sys kill 11 <process ID> I don’t remember if you have to do a discovery after this or if it will return to normal on the next polling cycle. Interested to hear if this solves it for you – also interested to hear what firmware version you are seeing this on. Cheers, Nathan From: observium [mailto:observium-bounces@observium.org] On Behalf Of Serghei Golipad Sent: Friday, 8 May 2015 1:17 AM To: Observium Network Observation System Subject: Re: [Observium] Fortigate Ports Disappeared Hi Adam, Anything I should be looking for in the debug? I can see ifNames correctly displayed during debug however those don’t make it into portal. Also in event log I get below for all discovered ports: Interface changed: [ifDescr] TEST_PORT -> NULL; [ifType] other -> NULL; [ifDuplex] -> 0 One of the things I’ve picked up from poller debug: ignored (by empty ifDescr and ifName). Thanks From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 07 May 2015 15:45 To: observium(a)observium.org<mailto:observium@observium.org> Subject: Re: [Observium] Fortigate Ports Disappeared snmpwalk doesn't prove anything, since we don't use snmpwalk. Checking the output from the poller module running in debug might, though. ./poller.php -h <host> -m ports -d adam. Sent from Mailbird<http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campai…> On 07/05/2015 15:38:44, Serghei Golipad <s.golipad(a)kelway.com<mailto:s.golipad@kelway.com>> wrote: Hi Everyone, Has anyone else had this problem? All of a sudden some of the critical ports have disappeared, first though it was SNMP process crash on the firewall however simple snmpwalk proves that’s not the case. I then deleted device including RRDs and re-added, now none of the ports are showing ☹ I’m on 6404. Thanks PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. Kelway Ltd is a Company registered in England and Wales. This email is sent for and on behalf of Kelway Holdings Limited. Kelway Holdings Limited is the UK holding company for Kelway Limited trading as Kelway. The registered office for Kelway Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than Kelway or the sender of its existence. For more information about Kelway please visit www.kelway.com<http://www.kelway.com> _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

New Observium Installation => Graphs Ok but no data
by Jerome SCHEVINGT 11 May '15

11 May '15

Hi i have installed Observium from svn and he work but all graphs is at 0 i see the graph but In: -nan Out: -nan where is my error ? thanks jerome

1 0

[OBSERVIUM-906] abnormal value for the alert duration on observium alerts
by Supun Rathnayake 11 May '15

11 May '15

Hi , Wondering whether the Observium team would be looking into this issue http://jira.observium.org/browse/OBSERVIUM-906 -- With Best Regards, Supun Rathnayake Lanka communication Services (Pvt) Ltd. 65C, Dharmapala Mawatha, Colombo 07. Sri Lanka. Tel: +94-11-2437545 http://www.lankacom.net

1 0

Not showing ports on Juniper EX4200
by Stephen Bateman 10 May '15

10 May '15

Hi Everyone, I have just added a Juniper EX4200 to my kit then added it into Observium, however for some reason it does not list the ports. The JunOS is the same version as my other switches which are fine and if I discover the switch manually on CLI by device ID it appears to retrieve them fine. I have checked the SNMP config of the device against my other ones and they are the same so assume it is maybe something else. Any tips on how to resolve this would be appreciated. Stephen Discovery Output is as follows... Module [ os ] time: 0.0334s Ports : X dsc(5)[] lo0(6)[] tap(7)[] gre(8)[] ipip(9)[] pime(10)[] pimd(11)[] mtun(12)[] lo0.0(16)[] lo0.16384(21)[] me0(33)[] me0.0(34)[] vme(35)[] vme.0(36)[] bme0(37)[] bme0.32768(38)[] bme0.32770(40)[] vcp-0(49)[] vcp-0.32768(50)[] vcp-1(51)[] vcp-1.32768(52)[] vlan(501)[] ge-0/0/0(502)[] ge-0/0/0.0(503)[] ge-0/0/1(504)[] ge-0/0/1.0(505)[] ge-0/0/2(506)[] ge-0/0/2.0(507)[] ge-0/0/3(508)[] ge-0/0/3.0(509)[] ge-0/0/4(510)[] ge-0/0/4.0(511)[] ge-0/0/5(512)[] ge-0/0/5.0(513)[] ge-0/0/6(514)[] ge-0/0/7(515)[] ge-0/0/6.0(516)[] ge-0/0/7.0(517)[] ge-0/0/8(518)[] ge-0/0/8.0(519)[] ge-0/0/9(520)[] ge-0/0/9.0(521)[] ge-0/0/10(522)[] ge-0/0/11(523)[] ge-0/0/10.0(524)[] ge-0/0/11.0(525)[] ge-0/0/12(526)[] ge-0/0/12.0(527)[] ge-0/0/13(528)[] ge-0/0/14(529)[] ge-0/0/13.0(530)[] ge-0/0/14.0(531)[] ge-0/0/15(532)[] ge-0/0/15.0(533)[] ge-0/0/16(534)[] ge-0/0/16.0(535)[] ge-0/0/17(536)[] ge-0/0/17.0(537)[] ge-0/0/18(538)[] ge-0/0/18.0(539)[] ge-0/0/19(540)[] ge-0/0/20(541)[] ge-0/0/19.0(542)[] ge-0/0/20.0(543)[] ge-0/0/21(544)[] ge-0/0/21.0(545)[] ge-0/0/22(546)[] ge-0/0/23(547)[] ge-0/0/22.0(548)[] ge-0/0/23.0(549)[] ge-0/0/24(550)[] ge-0/0/24.0(551)[] ge-0/0/25(552)[] ge-0/0/25.0(553)[] ge-0/0/26(554)[] ge-0/0/26.0(555)[] ge-0/0/27(556)[] ge-0/0/27.0(557)[] ge-0/0/28(558)[] ge-0/0/28.0(559)[] ge-0/0/29(560)[] ge-0/0/30(561)[] ge-0/0/31(562)[] ge-0/0/29.0(563)[] ge-0/0/30.0(564)[] ge-0/0/31.0(565)[] ge-0/0/32(566)[] ge-0/0/32.0(567)[] ge-0/0/33(568)[] ge-0/0/34(569)[] ge-0/0/33.0(570)[] ge-0/0/34.0(571)[] ge-0/0/35(572)[] ge-0/0/35.0(573)[] ge-0/0/36(574)[] ge-0/0/37(575)[] ge-0/0/36.0(576)[] ge-0/0/37.0(577)[] ge-0/0/38(578)[] ge-0/0/38.0(579)[] ge-0/0/39(580)[] ge-0/0/40(581)[] ge-0/0/39.0(582)[] ge-0/0/40.0(583)[] ge-0/0/41(584)[] ge-0/0/41.0(585)[] ge-0/0/42(586)[] ge-0/0/43(587)[] ge-0/0/44(588)[] ge-0/0/42.0(589)[] ge-0/0/43.0(590)[] ge-0/0/44.0(591)[] ge-0/0/45(592)[] ge-0/0/45.0(593)[] ge-0/0/46(594)[] ge-0/0/46.0(595)[] xe-0/1/0(598)[] xe-0/1/0.0(599)[] vlan.0(600)[] gr-0/0/47(603)[] gr-0/0/47.0(604)[] vlan.100(605)[] vlan.199(606)[] vlan.302(607)[] vlan.304(608)[] Module [ ports ] time: 1.5604s Port Stacks: .................................................................................................................................................................................................... Module [ ports-stack ] time: 0.6286s Processors : JUNIPER-MIB .. JUNIPER-SRX5000-SPU-MONITORING-MIB hrDevice: Module [ processors ] time: 0.9984s Memory : JUNIPER-MIB .. JUNIPER-SRX5000-SPU-MONITORING-MIB HOST-RESOURCES-MIB Module [ mempools ] time: 1.4283s IPv4 Addresses : Module [ ipv4-addresses ] time: 0.1158s IPv6 Addresses : Module [ ipv6-addresses ] time: 0.2653s Sensors & Status: JUNIPER-MIB .. JUNIPER-ALARM-MIB .. JUNIPER-DOM-MIB Module [ sensors ] time: 2.644s Storage : HOST-RESOURCES-MIB ...... Module [ storage ] time: 0.052s Inventory : JUNIPER-MIB HOST-RESOURCES-MIB Module [ inventory ] stats: 11 added Module [ inventory ] time: 2.9178s Discovery protocols: LLDP-MIB CISCO-CDP-MIB Module [ discovery-protocols ] time: 0.2521s OSPF Neighbours: Module [ ospf-autodiscovery ] time: 0.0655s ARP/NDP Tables : Module [ arp-table ] time: 0.3335s Module [ junose-atm-vp ] time: 0.0003s BGP Sessions: BGP4-V2-MIB-JUNIPER No BGP on host Module [ bgp-peers ] time: 0.0221s VLANs: Q-BRIDGE-MIB 0 100 199 302 304 Module [ vlans ] stats: 0[V+] 100[V+] 199[V+] 302[V+] 304[V+] Module [ vlans ] time: 0.4547s Module [ mac-accounting ] time: 0.0003s Pseudowires : PW-STD-MIB Module [ pseudowires ] time: 0.0388s VRFs : Module [ cisco-vrf ] time: 0.1992s Module [ cisco-sla ] time: 0.0006s Module [ vmware-vminfo ] time: 0.0005s Cisco Class-based QoS: QoS not configured. Module [ cisco-cbqos ] time: 0.1115s Module [ libvirt-vminfo ] time: 0.0005s Module [ toner ] time: 0.0004s UCD Disk IO : Module [ ucd-diskio ] time: 0.0379s Wifi: Module [ wifi ] time: 0.0088s Module [ graphs ] time: 0.0072s Device [ ahostnamehere ] discovered in 12.18 seconds Memory usage: 5MB (peak: 5.25MB) MySQL: Cell[349/0.17s] Row[150/0.11s] Rows[10/0.01s] Column[0/0s] Update[1/0s] Insert[144/0.15s] Delete[0/0s]

2 1

The system doesn't show graphics
by Monico Briseño 09 May '15

09 May '15

I installed Observium on Ubuntu server. I followed all instructions available on the Observium web. However, the system doesn't show any kind of graphics. Also, I want to add a new Linux device with snmp v2 client installed, the system can't reached with the v2c features. Finally, I attached a screenshot of the linux server I could add it using CLI. Any ideas? TIA -- -- http://www.cobaej.edu.mx/cobaejweb/FLASH/bannerbvc.swf -- <http://www.cobaej.edu.mx/cobaejweb/FLASH/bannerbvc.swf>

2 1

Fortigate Ports Disappeared
by Serghei Golipad 08 May '15

08 May '15

Hi Everyone, Has anyone else had this problem? All of a sudden some of the critical ports have disappeared, first though it was SNMP process crash on the firewall however simple snmpwalk proves that's not the case. I then deleted device including RRDs and re-added, now none of the ports are showing :( [cid:image001.png@01D088DB.DC99D9B0] I'm on 6404. Thanks PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. Kelway (UK) Ltd is a Company registered in England and Wales. This email is sent for and on behalf of Kelway Holdings Limited. Kelway Holdings Limited is the UK holding company for Kelway (UK) Limited trading as Kelway. The registered office for Kelway Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than Kelway or the sender of its existence. For more information about Kelway please visit www.kelway.co.uk

4 9

False alerts on interface errors
by Michael Vieth 08 May '15

08 May '15

ALERT Modify Alert Entity TenGigabitEthernet2/0/2 Descr L2 Connection to <REDACTED> Conditions ifInErrors_rate gt 1 (19.692883895131) Metrics ifInErrors_rate = 19.692883895131 ifOutErrors_rate = 0 Duration 5 days, 2h 6s Device Device REDACTED Hardware WS-C3750E-48TD-E Operating System Cisco IOS 12.2(44)SE UNIVERSALK9 Location REDACTED Uptime 2 years, 213 days, 7h 59m 44s [data:image/png;base64,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] ALERT Modify Alert Entity TenGigabitEthernet2/0/1 Descr moved to <REDACTED> Conditions ifInErrors_rate gt 1 (490.91760299625) Metrics ifInErrors_rate = 490.91760299625 ifOutErrors_rate = 0 Duration 15 days, 4h 7s Device Device REDACTED Hardware WS-C3750E-48TD-E Operating System Cisco IOS 12.2(44)SE UNIVERSALK9 Location REDACTED Uptime 2 years, 213 days, 7h 59m 44s [data:image/png;base64,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] The te2/0/1 device has been admin shutdown for over a week and had counters cleared last night. Still getting alerts this morning. The te2/0/2 device had counters cleared yesterday, this alert comes in this morning and counters are still good. TenGigabitEthernet2/0/2 is up, line protocol is up (connected) 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored I don’t think my alert is configured incorrectly as I pulled it directly from online documentation. Anyone else have this problem? Any advice to fix? Cheers, Michael Vieth

2 1

Newbie - Mini-graphs (Mouseover & Device Title Bar)
by James Mooney 07 May '15

07 May '15

Dear All I've checked the FAQs and document, and apologise upfront if this is a stupid newbie question. I also apologise for using cheapo switches. I think I've followed the nstructions correctly, and my install looks to be okay and working. I've added two switches: Zyxel GS1920-48 and Netgear GS728TXS. Both are communicating and collecting data. In the Devices page, when I hover my mouse over the Zyxel I get graphs for Traffic, Uptime and Ping Response; however when I hover it over the Netgear I only get the Traffic graph (this also applies to the mini-graphs in the Device's title bar). If I use the graph filter I can see I'm collecting Uptime and Ping Response for both switches. Is there a way to configure this? Many thanks in advance, James

2 2

Fwd: Mitel alarm check
by Gerry Armstrong 07 May '15

07 May '15

Hi Guys, I am not sure if this is possible but I would like to be able to add a check in Observium that will monitor the state of a Mitel PBX Alarm state and then report what the state actually is. I know what the snmp variables are that I will have to use to achieve this and I can snmpwalk the PBX to get the correct results but I don't understand as yet how to apply this knowledge to Observium. I actually have a perl script that works with Nagios to do this but I prefer the Observium interface. The check the alarm state on the Mitel PBX we can use "snmpwalk -v 2c -c public HOST 1.3.6.1.4.1.1027.4.1.1.2.2.1.0". If the response in INTEGER: 1 then there is no alarm, 2 is MINOR, 3 is MAJOR and 4 is CRITICAL We can then use "snmpwalk -v 2c -c public HOST 1.3.6.1.4.1.1027.4.1.1.2.2.4.1.8" to retrieve the actual alarm details. Any advice welcomed! Thanks, Gerry

2 5

New Community Edition
by Rolando＠gmx.net 07 May '15

07 May '15

1 0

PIX ASA
by Jeffrey d'Ambly 07 May '15

07 May '15

I just aded a PIX asa and for some reason it looks like my aggregate graph on the overview tab is not working (see graph below) what’s really odd is that I can see the individual graphs for each of the interfaces. How can I trouble shoot this? [cid:174AA95D-29D7-48D9-A822-C64E08803E74]

4 13

Re: [Observium] PIX ASA
by ron＠rjr-services.com 06 May '15

06 May '15

Just a point of note, since I'm not near my laptop and can't collect the requested debug information right now... I've got two ASA55xx running 8.2(5) firmware and am not having the problem on those devices. I also am polling a PIX525 running 8.0(4) firmware, and that is the only device where this graph error is showing up. Sent from my Verizon Wireless 4G LTE DROID Jeffrey d'Ambly <jeffrey.dambly(a)jasper.com> wrote: -- This message has been scanned by E.F.A. Project and is believed to be clean.

3 2

Re: [Observium] PIX ASA
by ron＠rjr-services.com 06 May '15

06 May '15

Whew, thought I was the only one with this problem. Am seeing likewise. Aggregate graph has same error as Jeff, but digging down into the ports screen shows valid data graphs on the individual interfaces. Sent from my Verizon Wireless 4G LTE DROID Jeffrey d'Ambly <jeffrey.dambly(a)jasper.com> wrote: -- This message has been scanned by E.F.A. Project and is believed to be clean.

1 0

Event Console
by Jeffrey d'Ambly 06 May '15

06 May '15

Has anyone integrated a SNMPtrap listener with observium for an event console? -Jeff

3 7

Ports view, extended Map of neighbours
by Svensson Fredrik A 05 May '15

05 May '15

Hi there! We are using Observium for monitoring and traffic analysis in a cisco environment. Is there any plans of expanding how the Port/map-tool works? It would be great to see and/or be able to expand the map to include all our switches in the same LAN in more than 1 level, or at least know if there are more switches behind another switch in the Map-view. Thanks! / Fredrik

3 2

I have a problem with a Core switch Procurve 8212zl
by septp nih 05 May '15

05 May '15

Just started to use observium , it's a great product :) I have a problem with a Core switch Procurve 8212zl, Adding the device with SNMP works great! but after a while all the interfaces gets automatically deleted ..The observium device loggs just shows Interface was marked as DELETED. Anyone knows why this happens?

1 0

Error Drawing Graph and more...
by Monico Briseño 04 May '15

04 May '15

Hi, there. I just installed Observium system on Ubuntu server. I followed all instructions on the webpage. However, I found two problems: 1. I add a Linux server. Almost everthing was Ok. However, I couldn't see the graphics. The Observium showed the Error Drawing Graph. 2. I couldn't reach a Windows server with snmp protocol v2 installed. But, the Observium showed the following information: Could not reach 192.168.110.202 with given SNMP parameters using v2c Any ideas? TIA Jose -- -- http://www.cobaej.edu.mx/cobaejweb/FLASH/bannerbvc.swf -- <http://www.cobaej.edu.mx/cobaejweb/FLASH/bannerbvc.swf>

3 2

Friendly Port Naming
by Kenneth Eisner 04 May '15

04 May '15

Greetings List, I'm using the community edition. I've searched the mail list and see comments from March of 2014 about assigning a friendly name to ports. Has there been any movement on this? Is it planned for the community edition any time soon? Thanks,

1 0

6880-X Fan Tray Failure
by Chip Pleasants 01 May '15

01 May '15

While setting up Alerts in Observium I noticed both our Cisco 6880-Xs have Fan Tray 1 50V Power Supply status is false. Looking at the show environment I don't see any issues. Anyone else have these boxes reporting similar Alerts? I did see another thread similar to this, but this seems a little bit different. We don't see any issues with our 6500s ( https://www.mail-archive.com/observium@observium.org/msg07354.html). Below is a screen shot output from show environment from one of our boxes. Thanks, -Chip [image: Inline image 1] sh environment environmental alarms: no alarms backplane: operating fan count: 1 fan-tray 1: fan-tray 1 type: C6880-X-FAN fan-tray 1 mode: Mode1 fan-tray 1 fan-fail: OK fan-tray 1 50V Power Supply: OK fan-tray 1 firmware version: 7 power-supply 1: power-supply 1 fan-fail: OK power-supply 1 power-input: AC high power-supply 1 power-output-mode: high power-supply 1 power-output-fail: OK power-supply 1 internal-diagnostics: OK power-supply 1 power-output-under-voltage: OK power-supply 2: power-supply 2 fan-fail: OK power-supply 2 power-input: AC high power-supply 2 power-output-mode: high power-supply 2 power-output-fail: OK power-supply 2 internal-diagnostics: OK power-supply 2 power-output-under-voltage: OK module 1: module 1 power-output-fail: OK module 1 outlet-1 temperature: 31C module 1 inlet-1 temperature: 28C module 1 asic-1 temperature: 46C module 1 asic-2 temperature: 44C module 1 EARL outlet-1 temperature: 54C module 1 EARL inlet-1 temperature: 53C module 5: module 5 power-output-fail: OK module 5 outlet-1 temperature: 37C module 5 inlet-1 temperature: 28C module 5 outlet-2 temperature: 32C module 5 inlet-2 temperature: 29C module 5 asic-1 temperature: 63C module 5 asic-2 temperature: 58C module 5 asic-3 temperature: 46C module 5 asic-4 temperature: 45C module 5 asic-5 temperature: 50C module 5 asic-6 temperature: 54C module 5 EARL outlet-1 temperature: 58C module 5 EARL inlet-1 temperature: 56C chassis connector rating: 1500.00 Watts (30.00 Amps @ 50V) module 1 module 1 connector rating: 2400.00 Watts (48.00 Amps @ 50V) module 1 power consumption: 320.00 Watts ( 6.40 Amps @ 50V) module 5 module 5 connector rating: 2400.00 Watts (48.00 Amps @ 50V) module 5 power consumption: 460.00 Watts ( 9.20 Amps @ 50V) chassis per slot cooling capacity: 114 cfm ambient temperature: < 55C module 1 cooling requirement: 84 cfm module 5 cooling requirement: 84 cfm

2 3

inodes monitoring
by Juan Asensio Sánchez 01 May '15

01 May '15

Hi all We have a Netapp storage, and apart from used/free space, we need to monitor used/free inodes, because our applications sometimes generate lots of files and we run out of inodes. Can this item be monitored? This data is published by Netapp using SNMP, so I think this is not parsed or displayed in Observium, is it right? If so, can it be enabled? Inodes can also be monitored for local filesystems. Regards. Este correo electrónico y, en su caso, cualquier fichero anexo al mismo, contiene información de carácter confidencial exclusivamente dirigida a su destinatario o destinatarios. Si no es vd. el destinatario indicado, queda notificado que la lectura, utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. En el caso de haber recibido este correo electrónico por error, se ruega notificar inmediatamente esta circunstancia mediante reenvío a la dirección electrónica del remitente. Evite imprimir este mensaje si no es estrictamente necesario. This email and any file attached to it (when applicable) contain(s) confidential information that is exclusively addressed to its recipient(s). If you are not the indicated recipient, you are informed that reading, using, disseminating and/or copying it without authorisation is forbidden in accordance with the legislation in effect. If you have received this email by mistake, please immediately notify the sender of the situation by resending it to their email address. Avoid printing this message if it is not absolutely necessary.

3 3

Disable Alerts Per Location for Downtime
by Johnston, Tom 30 Apr '15

30 Apr '15

Is there a “simple” way to disable alerts for a location? I have some scheduled power outage for a site and was wondering if you can select multiple devices to temporality disable alerts rather than go into each device one by one. I also forward alerts to my phones sms email so it will generate hundreds of sms once they go down. I do have my devices set up with locations though I’m not sure you can do anything with that. -Tom

2 1

Newbie questions
by Anders Johansson 29 Apr '15

29 Apr '15

Hi all, My first post here. First I must say that Observium is the most easy looking open source tool I have ever seen :) I'm trying to figure out a few config items that maybe someone can help me with. Autodiscovery If I'm using $config['autodiscovery']['xdp'] = TRUE; and $config['autodiscovery']['snmpscan'] = TRUE; First it does not seems to add any devices discovered with LLDP/CDP, nor have I found a way to do a snmpscan based on my subnets (also added) 1.) Does Autodiscover work as the config file says the feature is not yet added? PTR/DNS Does observium require a PTR record for every device or just a valid host name trough SNMP? How about FQDN? WMI Seems to be a topic not much covered and not really supported, however in the modules section of a device, let's say a server one can find an on/off switch for WMI and also a settings page. Does this mean WMI is somewhat supported or just a GUI glitch? Thanks

10 9