- observium - lists.observium.org

Re: [Observium] Enterasys Chassis Switches polling\discovery problems
by Austin Spencer 12 Sep '14

12 Sep '14

Hello, how would I disable that module in the config file for only those Switches? It also doesn't seem to be grabbing the port names. All 600+ ports just say "Extreme Networks, Inc. 1000BASE-T RJ45 Gigabit Ethernet Frontpanel Port"

1 0

f5 bandwidth
by Zhenhui Liang 12 Sep '14

12 Sep '14

Hi, We have several f5 load balancers added. But from observium ui, I saw they report traffic way lower than what f5’s own guy replies. The difference is quite huge. >From observium, each interface shows bandwidth usage like less than 1M bps. >From f5, it shows several hundreds of mega bps. Although from f5’s dashboard, it’s hard to understand, it doesn’t say which interface etc, it simply say out, in client side, server side etc. Also from observium, it reports each interface as 10Mbps. Do we know if F5 is broken? Thanks. —Zhenhui

1 0

Re: [Observium] Real time graphs resets much before
by Tom Laermans 12 Sep '14

12 Sep '14

In the pro verson the refresh is actually disabled for realtime graph pages :) Tom Adam Armstrong <adama(a)memetic.org> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Forced unsubscription
by Adam Armstrong 12 Sep '14

12 Sep '14

Hi Guys, If you get force unsubscribed to the list directly after this, it's because your mail server is rejecting emails with "naughty" words in them, so you're flooding other users with bounced messages. Please subscribe from an account which doesn't have draconian nanny email policies. (Because we all know it's impossible to change those policies, we don't even suggest you true, just use another account!) Thanks, adam.

3 2

Re: [Observium] Enterasys Chassis Switches polling\discovery problems (Adam Armstrong)
by Austin Spencer 12 Sep '14

12 Sep '14

Hello Adam, it appears to hang on the following for any of the Chassis Series switches. "Discoverying protocols: LLDP-MIB DEBUG : SMNP Auth options = -v2c -c '<CN>' /usr/bin/snmpbulkwalk -v2c -c '<CN>' -OQUs -m /LLDP-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'<HOSTNAME>':'161' lldpRemoteSystemData

2 1

Problem with the Mail Alerting
by SCHEIN David 12 Sep '14

12 Sep '14

Hello, Since lot of days I tried to configure the email alert in observium but it's impossible to receive some alert emails.... :( you can see there, a part of my config.php // Mailer backend Settings $config['email']['enable'] = TRUE; // Enable/Disable email globally $config['email']['from'] = '"OBSERVIUM Network Monitor" <observium(a)s****.fr>'; // Mail from. Default: "Observium" <observium@`hostname`> $config['email']['default'] = "d*****(a)gmail.com"; // Default alert recipient $config['email']['default_only'] = TRUE; // Only use default recipient (all alerts send to default recipient) $config['email']['backend'] = 'sendmail'; // Mail backend. Allowed: "mail" (PHP's built-in), "sendmail", "smtp". // sendmail backend specific options $config['email']['sendmail_path'] = '/usr/sbin/sendmail'; // The location of the sendmail program. // smtp backend specific options $config['email']['smtp_host'] = 'localhost'; // Outgoing SMTP server name. $config['email']['smtp_port'] = 25; // The port to connect. $config['email']['smtp_timeout'] = 10; // SMTP connection timeout in seconds. $config['email']['smtp_secure'] = NULL; // Enable encryption. Use 'tls' or 'ssl' $config['email']['smtp_auth'] = FALSE; // Whether or not to use SMTP authentication. $config['email']['smtp_username'] = NULL; // SMTP username. $config['email']['smtp_password'] = NULL; // Password for SMTP authentication. // Alerting Settings $config['poller-wrapper']['alerter'] = TRUE; $config['alerts']['bgp']['whitelist'] = NULL; // Populate as an array() with ASNs to alert on. $config['alerts']['port']['ifdown'] = TRUE; // Generate alerts for ports that go down $config['alerts']['port']['ifdown_types'] = array('core', 'transit', 'peering'); // Port bandwidth threshold percentage %age utilisation above this will cause an alert $config['alerts']['port_util_alert'] = FALSE; // Disabled as default //$config['alerts']['port_util_alert'] = TRUE; // Disabled as default $config['alerts']['port_util_perc'] = 85; // %age above which to alert $config['uptime_warning'] = "60"; // Time in seconds to display a "Device Rebooted" Alert. 0 to disable warnings. I tried different config, but nothing is working and with this config when I do a test, I receive the e-mail in my gmail box, but nothing about port down or bgp session down... php ./test_mail.php -d -h sto-rtr-edge-*****.lan CMD[/bin/hostname -f] RUNTIME[0.0302s] OUTPUT[ pu1-webnoc.s****.lan ] Observium v0.14.9.5798 Test E-mail Configuration My Hostname: pu1-webnoc.s****.lan E-mails ENABLED globally E-mails use SENDMAIL backend sendmail path: [/usr/sbin/sendmail] E-mails send only to default email E-mails use these default recipient(s): d*****(a)gmail.com E-mails send from: observium(a)s****.fr SQL[SELECT * FROM `devices` WHERE `hostname` LIKE 'sto-rtr-edge-a****.s****.lan'] Try send test notification for sto-rtr-edge-a****.s****.lan to these email(s): d*****(a)gmail.com SQL[SELECT attrib_value FROM devices_attribs WHERE `device_id` = '35' AND `attrib_type` = 'disable_notify'] SQL[SELECT DISTINCT `contact_method` FROM `alert_contacts` WHERE `contact_disabled` = 0 AND `contact_id` IN (SELECT `alert_contact_id` FROM `alert_contacts_assoc` WHERE `alert_checker_id` = '');] Notification for sto-rtr-edge-a****.s****.lan SENT. And I didn't see anything in /var/log/mail.log, I see only my test. Thanks for your time David

3 4

Enterasys Chassis Switches polling\discovery problems
by Austin Spencer 12 Sep '14

12 Sep '14

Hello all, I've been trying to find out some more information. I'm in the testing run of trying to migrate from Cacti to Observium. Enterasys standalone switches seem to poll data okay (other then memory and CPU) but the Chassis series like the S8 or N7's seem to be giving me a problem. The polling and discovery of these devices appear to hang. Looking at the polling\discovery history from the WebUI just shows 999.99s. Are there any tweaks I can do to get these devices to pull correctly? -Austin

2 1

Class names under CBQoS?
by Chip Pleasants 12 Sep '14

12 Sep '14

Hi all, I don't see class names under the CBQoS section of the interface. I'm running 0.14.9.5798, which I believe is the latest for the commercial version. Is this in the works or should I be able to see them in this version? Thanks, Chip

4 9

Re: [Observium] professional edition and supported distributions?
by Pablo Escobar Lopez 12 Sep '14

12 Sep '14

thanks for your reply. We will go for debian then. best, Pablo. 2014-09-12 10:58 GMT+02:00 Spencer Gaw <spencerg(a)frii.net>: > Debian and Ubuntu are the only supported distributions. CE or Pro > doesn't make a difference. > > Regards, > > SG > > On 9/12/2014 2:28 AM, Pablo Escobar Lopez wrote: > > Hi, > > > > We have been testing observium and now we are considering the > > possibility to upgrade to the professional version. > > > > Is CentOS supported under the professional license or should we stay > > using ubuntu or debian? > > > > thanks for your help. > > Pablo. > > > > > > -- > > Pablo Escobar López > > HPC systems engineer > > Biozentrum, University of Basel > > Swiss Institute of Bioinformatics SIB > > Email: pablo.escobarlopez(a)unibas.ch <mailto:pablo.escobarlopez@unibas.ch > > > > Phone: +41 61 267 15 82 > > http://www.biozentrum.unibas.ch > > > > > > _______________________________________________ > > observium mailing list > > observium(a)observium.org > > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > -- Pablo Escobar López HPC systems engineer Biozentrum, University of Basel Swiss Institute of Bioinformatics SIB Email: pablo.escobarlopez(a)unibas.ch Phone: +41 61 267 15 82 http://www.biozentrum.unibas.ch

1 0

professional edition and supported distributions?
by Pablo Escobar Lopez 12 Sep '14

12 Sep '14

Hi, We have been testing observium and now we are considering the possibility to upgrade to the professional version. Is CentOS supported under the professional license or should we stay using ubuntu or debian? thanks for your help. Pablo. -- Pablo Escobar López HPC systems engineer Biozentrum, University of Basel Swiss Institute of Bioinformatics SIB Email: pablo.escobarlopez(a)unibas.ch Phone: +41 61 267 15 82 http://www.biozentrum.unibas.ch

2 1

keepalived
by Stefan 12 Sep '14

12 Sep '14

1 0

June Changelog
by Adam Armstrong 12 Sep '14

12 Sep '14

Hi Guys, June Changelog! http://www.observium.org/wiki/Changelog#June_2014 Mike was away last month, and it shows. No Rusglish! :D Thanks, adam.

8 37

Manually edit the port name / description
by Anthony Polselli 12 Sep '14

12 Sep '14

We have a Zyxel DSLAM ADSL switch and Observium is polling fine, but it doesn't pull the customer name field. Is there a way (if I can figure out the OID) to add that to the polling or manual set a description for each ADSL port? [cid:image001.jpg@01CFCDA3.30938010] __________________________________________ Anthony Polselli, Chief Technology Officer Natural Networks, Inc. 10225 Barnes Canyon Rd. Suite A105 San Diego, CA 92121 anthony(a)naturalnetworks.com<mailto:anthony@naturalnetworks.com> http://www.naturalnetworks.com<http://www.naturalnetworks.com/> (619) 222-3232 office (858) 202-0301 fax

2 1

Real time graphs resets much before
by Arya, Renuka [BSD] - MED 12 Sep '14

12 Sep '14

Hi Team, I was doing some "real time graphs" for interfaces on one of our switch devices. I ran the tests for 15 seconds of Polling interval. The page says the "graph shows last 3600 (60 mins)" but it seems they get resets in 4-5 mins and restarts itself. Has anyone see anything similar before? Version of Observium : CE 14.4.5229 Thanks! Regards Renuka ________________________________ This email is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged and confidential. If the reader of this email message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is prohibited. If you have received this email in error, please notify the sender and destroy/delete all copies of the transmittal. Thank you.

2 1

Re: [Observium] observium Digest, Vol 50, Issue 45
by Dudu 11 Sep '14

11 Sep '14

Hi All. Thank you for the reply. I do agree that this information is not published via snmp. Maybe it will be the first system to use telnet or ssh and do some text parsing. Its also a lot more reliable. That can be a great thing. Thanks again David. Sent from my Samsung Galaxy smartphone. -------- Original message -------- From: observium-request(a)observium.org Date:11/09/2014 19:32 (GMT+02:00) To: observium(a)observium.org Cc: Subject: observium Digest, Vol 50, Issue 45 Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Re: Maybe I got it Wrong. (Spencer Gaw) 2. Re: Maybe I got it Wrong. (Tristan Rhodes) 3. Re: Maybe I got it Wrong. (Tristan Rhodes) 4. Manually edit the port name / description (Anthony Polselli) ---------------------------------------------------------------------- Message: 1 Date: Thu, 11 Sep 2014 08:18:54 -0600 From: Spencer Gaw <spencerg(a)frii.net> To: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] Maybe I got it Wrong. Message-ID: <5411AF4E.7080506(a)frii.net> Content-Type: text/plain; charset=windows-1252; format=flowed You might want to read up on SNMP and how it operates. Observium does not run commands on any device - it merely reports the data it gathers via SNMP. Regards, SG On 9/11/2014 4:31 AM, Dudu wrote: > Hi All, > I'm new here and I'm not sure about the port view. I can see the > neighbours and computers on the vlan on right side , the command looks > like show ip arp > > Maybe it's better to map the computer to the port itself? sh mac > address-table > > So out of the box we will know which server is connected to which > port. That could help to find VM's as well. > > Many Thanks > David. > > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium ------------------------------ Message: 2 Date: Thu, 11 Sep 2014 10:06:18 -0600 From: Tristan Rhodes <tristanrhodes(a)weber.edu> To: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] Maybe I got it Wrong. Message-ID: <CALeA1nfH+R-g7JdeQ4UD9nbtv6cN87-1UVDhcxSAveJ4WHC3ZQ(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" David, I think you had the same confusion as me, regarding how to find MAC addresses of nodes (computers). 1) Start by clicking on the name of a device. (You can search for it on the top right) 2) Click on the "Ports" tab. 3) If this is a router, there will be a tab called "ARP/NDP Table", this is IPv4 and IPv6 mapping of MAC address to IP address. If this device was only a layer-2 switch, then this tab would not be displayed. 4) There is a tab called "FDB Table", this is the mapping of MAC address to switchport. (I have always called this the CAM table). Due to the functionality of broadcasts, this will show every device in the same VLAN (the MAC address is seen on switch uplinks) However, I wish there was a node lookup tool that showed which switchport a computer was plugged into. We should be able to identify the interface closest to the computer by removing all interfaces that are CDP/LLDP neighbors with another known network device. Does this make sense? Cheers, Tristan *Tristan Rhodes* Network Engineer Weber State University 801.626.8549 On Thu, Sep 11, 2014 at 8:18 AM, Spencer Gaw <spencerg(a)frii.net> wrote: > You might want to read up on SNMP and how it operates. Observium does not > run commands on any device - it merely reports the data it gathers via SNMP. > > Regards, > > SG > > > On 9/11/2014 4:31 AM, Dudu wrote: > >> Hi All, >> I'm new here and I'm not sure about the port view. I can see the >> neighbours and computers on the vlan on right side , the command looks like >> show ip arp >> >> Maybe it's better to map the computer to the port itself? sh mac >> address-table >> >> So out of the box we will know which server is connected to which port. >> That could help to find VM's as well. >> >> Many Thanks >> David. >> >> >> >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >

2 1

Maybe I got it Wrong.
by Dudu 11 Sep '14

11 Sep '14

Hi All, I'm new here and I'm not sure about the port view. I can see the neighbours and computers on the vlan on right side , the command looks like show ip arp Maybe it's better to map the computer to the port itself? sh mac address-table So out of the box we will know which server is connected to which port. That could help to find VM's as well. Many Thanks David.

3 3

Re: [Observium] how to make observium not to poll certain mibs
by Zhenhui Liang 10 Sep '14

10 Sep '14

I tried that. But seems only a few module are listed there. I think if I disable any of them, a big class of monitors would be disabled with it. I am looking for a way to disable certain mib/objects. Thanks a lot. Would removing/commenting out those objects from the mib file help? On 9/9/14, 2:19 PM, "Pedersen, Sean" <spedersen(a)io.com> wrote: >On the device's page in Observium, there is a small gear icon on the far >right hand side of the screen. Click on that. Then click on the MIBs link >in the Edit bar. You should see a list of MIBs associated with that >device. From there you can disable individual MIBs from being polled. > >-----Original Message----- >From: observium [mailto:observium-bounces@observium.org] On Behalf Of >Zhenhui Liang >Sent: Tuesday, September 09, 2014 2:11 PM >To: Observium Network Observation System >Subject: [Observium] how to make observium not to poll certain mibs > >Hi, Sorry if this has been answered. But I didn't find the answer in >doing search. > >So we have a router bug of memory leak core-dump which was caused by >observium trying to do snmpwalk against a certain mib. Vendor advise us >to upgrade the code to latest, which we can't do without significant >amount of coordination. So I am trying to figure out how to make >observium not to poll it. didn't find from gui. >If I delete the mib definition from the mibs/ sub dir, would that be >enough? > >Thanks a lot. >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > >Founded in 2007, IO is a worldwide leader in software defined data center >technology, services and solutions that enable businesses and governments >to intelligently control their information. > >The communication contained in this e-mail is confidential and is >intended only for the named recipient(s) and may contain information that >is privileged, proprietary, attorney work product or exempt from >disclosure under applicable law. If you have received this message in >error, or are not the named recipient(s), please note that any form of >distribution, copying or use of this communication or the information in >it is strictly prohibited and may be unlawful. Please immediately notify >the sender of the error, and delete this communication including any >attached files from your system. Thank you for your cooperation. >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 4

The ports on the switches doesn't seems to display correct network throughput
by Arya, Renuka [BSD] - MED 10 Sep '14

10 Sep '14

Hi Team, I installed Observium recently. It seems to be working just fine. However, I do see discrepancies in the throughput result. When I run a network performance tool (Nuttcp) on one of the server and monitor the corresponding port on the switch through observium. I observe that the the server is generating around 9.8 Gbps data. If I check the ports directly on the switch I see same thing (~9.8 Gbps) but when I see in through observium on the corresponding port , I see frequent spikes to 12 - 15 Gbps. I am not sure why I am seeing these high value because the NICs on servers are having a 10 G NICs and I never see anything higher than 10 Gbps on server or on the port on the switch. But the real time graphs on Observium shows the spikes of around 12 - 15 Gbps. I would be really glad if you help me on this. I really like the tool but the discrepancy in the throughput result is kind of driving me crazy. Thanks! Regards Renuka ________________________________ This email is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged and confidential. If the reader of this email message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is prohibited. If you have received this email in error, please notify the sender and destroy/delete all copies of the transmittal. Thank you.

4 9

Re: [Observium] Eventlog time and date
by Tomasz Karczewski 10 Sep '14

10 Sep '14

Ok i've changed in php.ini date.timezone value to Europe/Warsaw and now is fine :) Tnx for the advice. Tomasz Karczewski Administrator Sieci tkarczewski(a)man.olsztyn.pl http://www.man.olsztyn.pl http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie From: observium [mailto:observium-bounces@observium.org] On Behalf Of Tomasz Karczewski Sent: Wednesday, September 10, 2014 1:22 PM To: 'Observium Network Observation System' Subject: Re: [Observium] Eventlog time and date SELECT TIMEDIFF(NOW(), UTC_TIMESTAMP); +--------------------------------+ | TIMEDIFF(NOW(), UTC_TIMESTAMP) | +--------------------------------+ | 02:00:00 | +--------------------------------+ 1 row in set (1.18 sec) php -i | grep timezone PHP Warning: Unknown: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone. in Unknown on line 0 Default timezone => UTC date.timezone => no value => no value date +%::z +02:00:00 Tomasz Karczewski Administrator Sieci tkarczewski(a)man.olsztyn.pl http://www.man.olsztyn.pl http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie From: observium [mailto:observium-bounces@observium.org] On Behalf Of Mike Stupalov Sent: Wednesday, September 10, 2014 1:00 PM To: Observium Network Observation System Subject: Re: [Observium] Eventlog time and date Hi, On 10.09.2014 13:07, Tomasz Karczewski wrote: Hi there, I've got one question. Fresh eventlogs and syslogs have format <https://observium.man.olsztyn.pl/> -1y -1d -2h . How to change it? pls show some info for your server: 1. mysql timezone, from console: $ mysql SELECT TIMEDIFF(NOW(), UTC_TIMESTAMP); 2. php timezone: $ php -i | grep timezone 3. system timezone: $ date +%::z Tomasz Karczewski Administrator Sieci tkarczewski(a)man.olsztyn.pl http://www.man.olsztyn.pl http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov http://observium.org

1 0

Eventlog time and date
by Tomasz Karczewski 10 Sep '14

10 Sep '14

Hi there, I've got one question. Fresh eventlogs and syslogs have format <https://observium.man.olsztyn.pl/> -1y -1d -2h . How to change it? Tomasz Karczewski Administrator Sieci tkarczewski(a)man.olsztyn.pl http://www.man.olsztyn.pl http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie

2 4

email alerts
by Zhenhui Liang 10 Sep '14

10 Sep '14

Hi, All I tired many ways to make email working. But seems to be out of luck. >From linux command line, mail prove to be work on either local sendmail/postfix or via external smtp server. Php test email works either way as well. But observium seems not able to generate any alert email. A tcpdump session would not capture any email data as well when my configured alert checker fires off an alert. Seems from config.php, I need to configure $config['alerts']['alerter']['default']['descr'] = "Observium Email Alert"; $config['alerts']['alerter']['default']['type'] = "email"; $config['alerts']['alerter']['default']['contact'] = “zliang(a)xxxx.com"; $config['alerts']['alerter']['default']['enable'] = TRUE; $config['email_from'] = “observium(a)xxxxxx.com"; $config['email_backend'] = "mail"; $config['email_smtp_host'] = 'localhost’; Also tried $config['email']['from'] = “observium(a)xxx.com"; $config['email']['backend'] = "mail"; $config['email']['smtp_host'] = 'localhost'; $config['email']['default_only'] = 'true'; $config['email']['smtp_secure'] = 'false’; And $config['email']['from'] = “observium(a)mydomain.com"; $config['email']['backend'] = “smtp"; $config['email']['smtp_host'] = ’smtp.mydomain.com'; $config['email']['default_only'] = 'true'; $config['email']['smtp_secure'] = 'false’; None of those combination of configs works. It looks like we are deprecate old format of $config['email_from’] to $config[‘email’]['from’] style? With later format, from global settings, I could see my change taking effect. But using the old format, some values got updated, some not. But nevertheless, email were never sent out. Please advise. I am using code version of Observium 0.14.9.5798 Apache 2.2.15 (CentOS) PHP 5.3.3 MySQL 5.1.66 SNMP NET-SNMP version: 5.5 RRDtool 1.3.8

5 13

how to make observium not to poll certain mibs
by Zhenhui Liang 09 Sep '14

09 Sep '14

Hi, Sorry if this has been answered. But I didn’t find the answer in doing search. So we have a router bug of memory leak core-dump which was caused by observium trying to do snmpwalk against a certain mib. Vendor advise us to upgrade the code to latest, which we can’t do without significant amount of coordination. So I am trying to figure out how to make observium not to poll it. didn’t find from gui. If I delete the mib definition from the mibs/ sub dir, would that be enough? Thanks a lot.

2 1

FW: FTOS 9.4 not working properly with Observium whereas 8.3.12.0 for Force10 switches
by Arya, Renuka [BSD] - MED 09 Sep '14

09 Sep '14

Hi Team, I recently installed Obervium I am in process of adding my switch devices to Observium network monitoring tool. It seems that my Force10 S4810 switch with FTOS 8.3.12.0 displays correct graphs whereas the Force10 S4810 switches with FTOS 9.4 doesn't display graphs correctly.It works partially, but doesn't display a lot of other information. The website http://www.observium.org/wiki/Supported_Devices says they have tested FTOS till 8.2.1.2 and I can see it works fine at least till 8.3.12.0. So Iam not sure what should be expected for higher version of FTOS. It works just fine with Arista OS 4.13.6F I'll be really glad if you can look into this. Thanks! Regards Renuka Arya University of Chicago ________________________________ This email is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged and confidential. If the reader of this email message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is prohibited. If you have received this email in error, please notify the sender and destroy/delete all copies of the transmittal. Thank you.

5 12

alert checker based on a specific mib value?
by Zhenhui Liang 09 Sep '14

09 Sep '14

Hi, I am trying the enterprise observium version now for the alert checkers. I understand that we could add checkers based on existing conditions and metics listed on http://www.observium.org/wiki/Alerting_Metrics_and_Attributes But say, if I want to alert on another mib value not listed here, is there currently a way to do so? for instance, I have this mib listed under mibs/PAN-MIB-MODULES panSessionActive OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of active sessions." ::= { panSession 3 } Can I add an alert checker to put condition as panSessionActive gt 100000 ? I tried, but seems not able to. Is there a special way to do so? Thanks a lot. —Zhenhui Liang

2 1

Email Alert setup
by Darian Jimenez 08 Sep '14

08 Sep '14

Hello, I was able to get some alert checks going but email doesn't seem to be working. When I try the test_mail.php script it eventually times out giving me the following. ./test_mail.php -h fwtec.sup.domain.local Sending test notification for fwtec.sup.domain.local...Mailer Error: Failed to connect to myemailserverl.protection.outook.com:25 [SMTP: Failed to connect socket: Connection timed out (code: -1, response: )] done. my config.php has the following for email settings. $config['alerts']['email']['default'] = "xxx@mydomain"; $config['email_from'] = "Observium <observium(a)mydomain.com>"; $config['email_backend'] = "smtp"; $config['email_smtp_host'] = 'mymaildoman.protection.outook.com'; $config['email_smtp_port'] = 25; $config['alerts']['email']['enable'] = TRUE; $config['email_smtp_auth'] = TRUE; $config['email_smtp_username'] = 'xxx@mydomain'; $config['email_smtp_password'] = 'xxxx'; $config['email_smtp_timeout'] = 10; I am able to successfully telnet to my email server on port 25 but can't seem to send. What am i Missing?

3 7