- observium - lists.observium.org

Re: [Observium] Weird database issue?
by Nick Pais 27 Aug '14

27 Aug '14

Hogan, I'm talking about the current throughput, screenshots attached. Please excuse my "fantastic" GIMPing skills :D Thanks! > Message: 2 > Date: Fri, 8 Aug 2014 17:40:03 +0000 > From: Hogan Whittall <whittalh(a)yahoo-inc.com> > To: Observium Network Observation System <observium(a)observium.org> > Subject: Re: [Observium] Weird database issue? > Message-ID: <6CDB9AE7-7909-401B-80E3-D404CDA371AC(a)yahoo-inc.com> > Content-Type: text/plain; charset="windows-1252" > > If you?re referring to the link speed (100Mb, 1Gb, etc) then that has historically been a problem with permissions when snmpd tries to access ethtool info. You basically have 3 options: > > - Run snmpd as ?root? (Not recommended) > - Enable ETHTOOL_GSET in the kernel > - Add the link speed of each NIC to snmpd.conf (interface ethX 6 <speed in bits/s>) > > I went with the third option and wrote a script to do this for me. This info is kept in the ?ports? table. > > Or are you talking about current throughput and not port speed? > > -Hogan

4 11

fixing graphing of FortiGate memory (used to work, now broken)
by Nathan Phelan 27 Aug '14

27 Aug '14

Hi Guys, Short version: Fortinet memory stops showing in Observium after updating due to Fortinet MIBS not being where Observium expects them. Hack Solution: mv /opt/observium/mibs/FORTINET-* /opt/observium/mibs/fortinet/ ./discovery.php -h all Long version: We have been running a very old version for a long time ( 0.14.1.4945 ) and it's been ticking along nicely but I've finally found some time to do a test update to the latest svn and ran into an issue with Fortigate memory. I ran a discovery with debug; attached as "memory debug.txt". If I run one of those commands manually I get the following: root@clone:/opt/observium# /usr/bin/snmpget -v2c -c 'test -snmp' -OvQ -m FORTINET-FORTIGATE-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp:/opt/observium/mibs/fortinet 'udp':'testdev.test.local':'161' fgSysMemUsage.0 MIB search path: /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp:/opt/observium/mibs/fortinet Cannot find module (FORTINET-FORTIGATE-MIB): At line 0 in (none) fgSysMemUsage.0: Unknown Object Identifier (Sub-id not found: (top) -> fgSysMemUsage) The FORTINET-FORTIGATE-MIB files don't appear to have changed but Observium appears to be looking for them under "/opt/observium/mibs/fortinet/" when they are actually just under "/opt/observium/mibs/" After doing this: root@clone:/opt/observium# cd mibs root@clone:/opt/observium/mibs# mkdir fortinet root@clone:/opt/observium/mibs# mv FORTINET-* ./fortinet/ and then running discovery again memory stats came back. Has anyone else had this issue? If so maybe the MIBS need to be relocated in SVN? Cheers, Nathan

2 1

Quote for feature
by Benoit Lambert 26 Aug '14

26 Aug '14

Where can I get a quote for a new feature? The Professional Services (http://www.observium.org/services/) page doesn't contain any information on who to contact. Thanks, Benoit

6 8

Pagination on edit settings?
by Michael Loftis 26 Aug '14

26 Aug '14

Is there *any* way to get pagination added to the edit setting pages? F/ex the "Sensors" page is unusable on a majority of my devices try waiting for load/render when you've got something like a fully loaded Juniper EX9214 so you can disable a sensor alert on one port ... ~300 ports - it's just pure pain assuming it finishes at all. And then you have to set PHP's limits so high to get the submit/save to work. Another issue is I kind of need an ability to occasionally do a "reset all" on the limits page. Individually checking off hundreds of sensors is a completely unnecessary waste of time. I realise I could go muck in the database for both of these in my particular but thats just not always an option and this just seems like something it should be doing when it hits a couple hundred records or some configurable limit. -- "Genius might be described as a supreme capacity for getting its possessors into trouble of all kinds." -- Samuel Butler

2 1

Re: [Observium] Moving logs and rrds to another partition?
by Benoit Lambert 25 Aug '14

25 Aug '14

If anyone is interested, this is how I did it without shutting down the server. And it worked. #Add 2 30GB disk (sdb1=DB | sdc1=rrd) #Rescan to find HDD - without shutdown echo "- - -" > /sys/class/scsi_host/host2/scan #check if it got added fdisk -l ls -la /dev/sd* #Stop daemons service crond stop service snmpd stop service syslog-ng stop service httpd stop service auditd stop #Stop sql last service mysqld stop #Configure DB HDD fdisk /dev/sdb n p 1 <cr> <cr> w #Configure rrd HDD fdisk /dev/sdc n p 1 <cr> <cr> w #Format them in ext4 mkfs.ext4 /dev/sdb1 mkfs.ext4 /dev/sdc1 #Rename DB folder cd /var/lib/ mv mysql mysql_tmp #Recreate mysql folder mkdir mysql #Mount the DB hard drive mount -t ext4 /dev/sdb1 /var/lib/mysql #Copy files over and preserve owners/perms cp -rp mysql_tmp/* mysql/ #change owner/perms of mysql folder chown mysql:mysql mysql #Rename rrd folder cd /opt/observium mv rrd rrd_tmp #Recreate rrd folder mkdir rrd #Mount the rrd hard drive mount -t ext4 /dev/sdc1 /opt/observium/rrd #Copy files over and preserve owners/perms cp -rp rrd_tmp/* rrd/ #change owner/perms of mysql folder chown apache:apache rrd #mount at startup - edit /etc/fstab /dev/sdb1 /var/lib/mysql ext4 defaults 0 0 /dev/sdc1 /opt/observium/rrd ext4 defaults 0 0 #Start daemons service mysqld start service httpd start service syslog-ng start service snmpd start service crond start service auditd start

2 1

Re: [Observium] help with observium
by Benoit Lambert 25 Aug '14

25 Aug '14

Add this to your config.php #PING Settings - Retries/Timeouts $config['ping']['retries'] = 10; // How many times to retry ping (1 - 10) $config['ping']['timeout'] = 1000; // Timeout in milliseconds (50 - 2000)

3 2

help with observium
by Magnus Svensson 25 Aug '14

25 Aug '14

Hi! I got a problem with my new install. i get messege: 2014-08-25 11:00:01 "host" System Device status changed to Up 2014-08-25 10:55:07 "host" System Device status changed to Down (ping) its always down 5min, and if i ping the host its up. its just observium that think its down. ive google it and tried ping settings in config and i dont get it to work. someone know whats wrong? //magnus

3 3

Status Proxmox-VE-Monitoring
by Cyrill Matenaers 23 Aug '14

23 Aug '14

Hi all, I just read something about Proxmox-Monitoring here http://jira.observium.org/browse/OBSERVIUM-471. What is the actual status of this development? Is there any documetation on how to use it? Thanks for your help! Kind regards, Cyrill

4 6

Re: [Observium] alerting
by Jake Hansen 22 Aug '14

22 Aug '14

Can anyone help with an issue we are having regarding alerting. Every since updating a few weeks ago, we no longer get email alerts when outages occur. I have verified that the email on the server it self is working, we simply get no events generated when things go down. Did something change in this regard? How can I restore email alerts? -- Jake Hansen Sr. Network Administrator ZTelco / Zray Technologies, Inc. 858-431-4411 Direct 858-565-2155 Office

2 1

Apache access config for Ubuntu 14.04
by Al Nash 22 Aug '14

22 Aug '14

Hello Observium Just curious, your documentation here http://www.observium.org/wiki/Debian_Ubuntu_Installation#Problems mentions modifying the Apache access configuration for 13.10 and 14.04. Are there any helpful articles that can assist with making the necessary modifications? Thank You -- <http://dattobackup.com/email-signature> *Al Nash*DEVT Engineer Datto, Inc. 877-455-6015www.dattobackup.com

1 0

Odd real time graph behavior
by Derek 22 Aug '14

22 Aug '14

I'm getting some strange looking graphs on some ports on my routers, where the graph is basically just a bunch of spikes. Set at 1 second intervals, it will register traffic for one tick, then nothing for anywhere from 4-10 ticks, then register traffic again, and so on. This is happening on Cisco 2811's, 2911's, and a 7206VXR, and it happens on the FastEthernet, GigEthernet, and SVI ports on them. If I set the interval to 5 seconds or higher, it looks normal again. Now, these same routers with this problem have no issue doing a 1 second interval on their Serial ports or sub-interfaces. We have several 2960 switches that seem to work just fine. I've attached an example graph to show you what I see. I happen to know that this port had at least a consistent 1MB connection throughout the time period of the graph. Thanks, Derek

3 4

Simple question about application monitoring
by Christopher K. Brown 22 Aug '14

22 Aug '14

Looking at Observium for the first time and wanted confirmation on this: From looking around at an install and the scripts in the scripts/agent-local directory, I believe these data-gathering scripts are executed locally on each host that is being monitored. Is that correct? Thanks!

2 1

Re: [Observium] Moving logs and rrds to another partition?
by Benoit Lambert 21 Aug '14

21 Aug '14

Perfect, thanks! I won't forget to chown/chmod :P Benoit

1 0

Re: [Observium] Moving logs and rrds to another partition?
by Benoit Lambert 21 Aug '14

21 Aug '14

Can I move entire DB to another disk? Like this? : 1. Stop the daemons 2. Rename the DB folder "mv /var/lib/mysql /var/lib/mysql-tmp" 3. Recreate the folder "mkdir /var/lib/mysql" 4. Mount the new disk to the new folder "mount -t ext4 /dev/sdb1 /var/lib/mysql" (put in fstab after) 5. Copy the files from the old folder to the new folder (cp mysql-tmp/* mysql/) 6. Restart the daemons. And voila??? Thanks, Benoit

3 2

Re: [Observium] Moving logs and rrds to another partition?
by Benoit Lambert 21 Aug '14

21 Aug '14

Would this work? http://dev.mysql.com/doc/refman/5.5/en/symbolic-links.html Thanks, Benoit

2 1

Cannot Ping
by Greg Lipschitz 21 Aug '14

21 Aug '14

Hi All, Seeing an issue where the interface is reporting it cannot ping the host but you can ping it fine from the console of the server. Anyone else seen this issue? Adding host xxxxxxxxx community mycomunity port 161 Could not ping xxxxxxxxxxx. Greg Lipschitz Director Summit IT Management<http://www.thesummitgroup.com.au> | Summit Internet<http://www.summitinternet.com.au> | Summit Creative<http://www.summitcreative.com.au> - ‘reach your peak’ Divisions of The Summit Group (Australia) Pty Ltd Phone (Australia): 1300 049 749 Phone (US & Canada): (321) 216 3844 E-mail: Greg(a)thesummitgroup.com.au<mailto:Greg@thesummitgroup.com.au> Internet: http://www.thesummitgroup.com.au/<http://www.thesummitgroup.com.au> Address: Level 1, 39 Railway Road, Blackburn VIC 3130 Postal: P.O. Box 3225, Doncaster East VIC 3109 Follow us on Facebook<http://www.facebook.com/thesummitgroup/> | LinkedIn<http://www.linkedin.com/company/1942329> | Twitter<http://twitter.com/summitgroupau/> -- ExchangeDefender Message Security: Click below to verify authenticity https://admin.exchangedefender.com/verify.php?id=s7LBpcHQ003797&from=greg@t…

2 3

Traffic graphs have red line on it
by Marco Marques 21 Aug '14

21 Aug '14

Hi Guys, When looking at the traffic graphs for the ports on a devices, it has these red lines on the graph. What do they represent? See attached. Marco Marques

4 4

Alert Checker - Device match
by Jake Turner 21 Aug '14

21 Aug '14

Hi All, I hope somebody can help. I’m currently trying to add device alerts for all my Cisco devices. As per the example in the alerting guide I’ve used ‘os equals iOS’ which works perfectly for my iOS devices but doesn’t alert on any of my XR devices. I gave 'os match iOS’ a go but that again only gives iOS devices. ‘os equals iosxr’ pulls the XR devices but obviously not the iOS devices. I’ve also tried the two statements on separate lines and that just breaks the checker. Is there any way to put the iOS and XR devices on one checker (based on os) or am I going to have to look into selecting on hostname or something similar? Thanks Jake Turner

3 3

Moving logs and rrds to another partition?
by Benoit Lambert 20 Aug '14

20 Aug '14

I want to move all logs and rrds to another partition. I know rrds are stored in "/opt/observium/rrd"... But where on disk does Observium store syslogs|eventlogs? Unless they are in the DB and moving them to another partition is impossible...? I have it installed on Centos 6.5. Thanks in advance for any help! Benoit

3 2

Alerting
by RYAN M. vAN GINNEKEN 20 Aug '14

20 Aug '14

Just to be clear Alerting is only available in the paid version? the website observium states future ... "is the future is now"??? this is a very important feature that is lacking Computer King CaN-Mail Surveillance King http://computerking.ca http://canmail.org http://surveillanceking.net Surveillance - Sales Service - Hosting Backup Internet Based Surveillance Systems Custom Service Pac kages Secure IMAP Email - Automated Remote Backups - Photo Blogs - Online ERP and Accounting Packages

4 5

Re: [Observium] No port names in traffic accounting
by Travis Kreikemeier 20 Aug '14

20 Aug '14

Any thoughts on this issue? Is this a known issue? Observium 0.14.7.5736 (stable) TRAVIS KREIKEMEIER From: Travis Kreikemeier Sent: Sunday, August 10, 2014 1:27 PM To: 'observium(a)observium.org' Subject: No port names in traffic accounting When adding a Calix E7 port to a customer in traffic accounting. All of the interfaces in the drop down are blank, so hard to figure out which one to select. A work around I have been doing is going to the switch port and clicking "Create Bill". Would like to add the ports in the traffic accounting area. [cid:image001.jpg@01CFB87C.115A9BC0] Some of the ports on the device: [cid:image002.jpg@01CFB87C.115A9BC0] TRAVIS KREIKEMEIER

8 12

Port Alerts
by Tech8 otelafrica 20 Aug '14

20 Aug '14

Hi Guys On the subscription version, what would be an example of setting up an alert if a serial0/0 or eth0 port goes down on a device? Regards Anton

2 1

server rebooted log over and over again
by Simon Smith 20 Aug '14

20 Aug '14

Hi All, I seem to have an issue with a Windows machine and SNMP, every 5 mins when the Observium checks one of our windows machine, I keep getting ‘Device rebooted after X days’ in the event logs of that machine I did do a server reboot the other day on that machine, however if i enable the Device Ignore, i never see this issue but again thats only a work around!? is the a bug possible?! im happy to help with this issue Regards Simon

1 0

dealing with locations
by Mike Glass 20 Aug '14

20 Aug '14

How does one go about changing the location, is there somewhere I can input gps coordinates to change the map pointers to a specific location. Most of my devices show up in the UK as they are tagged "Server Room". Thanks Mike

8 12

monitor device by multiple ips
by Simon Smith 20 Aug '14

20 Aug '14

Hi All, this is a daft random question, can i monitor a device via multiple ip addresses? for instance, we have a site with a mikrotik router, they currently have 3 internet lines (DONT ASK!) 2xADSL,1xFTTC currently we use PPPOE on the router so we can see the mikrotik directly, ive enabled SNMP remotely and i monitor the box via 1 of the ADSL lines, however its constantly goes up and down and never makes up its mind! the other issue i have is the FTTC line is dynamic ip and never stays the same for more then 48hrs so in my mind, /etc/hosts or DNS for site1.router goes to 1.2.3.4, 5.6.7.8, 9.10.11.12 then every check it always use one of three ip addresses ? am i correct? or is the another way of monitoring this device? regards Simon

6 11