- observium - lists.observium.org

Re: [Observium] New install no graphs
by Josh Hopper 13 Dec '13

13 Dec '13

Verify cron and your SNMP.conf file. It took a discovery poller and time before mine populated. Vmman <vmman50(a)gmail.com> wrote: Thank you I'm monitoring a device that I did not not setup, spoke too soon on the graphs. I think my cron job is not working correctly. After doing the chmod on the rrd directory I did a polling manually and now I see memory, processor, temp reading but no graphs. So close Mark On Thu, Dec 12, 2013 at 2:37 PM, Josh Hopper <joshhopper(a)protectplus.com<mailto:joshhopper@protectplus.com>> wrote: Add a sysContact to your switch and add it on the device in observium. Click the gear when drilled down to a device. Just the switch one is required but both helps in rare cases. Also, my pleasure. Vmman <vmman50(a)gmail.com<mailto:vmman50@gmail.com>> wrote: Joshua thank you very much, that seems to have worked. Sorry to bug you I have another question I'm monitoring a Cisco switch, how do you get the location correct on the global map? Mark On Thu, Dec 12, 2013 at 1:34 PM, Josh Hopper <joshhopper(a)protectplus.com<mailto:joshhopper@protectplus.com>> wrote: You have the same issue I just fixed. Chmod 775 on your rrd folder and make sure you have your cron setup correctly (bottom of the install guide). -- Sincerely, Joshua Hopper, A+ CE Network Administrator [cid:image001.jpg@01CEF74F.A95B40D0] 420 3rd Ave NW Hickory NC 28601 Office: 828-449-1839x2160<tel:828-449-1839x2160> | Cell: 828-855-7565<tel:828-855-7565> From: observium [mailto:observium-bounces@observium.org<mailto:observium-bounces@observium.org>] On Behalf Of Vmman Sent: Thursday, December 12, 2013 3:19 PM To: observium(a)observium.org<mailto:observium@observium.org> Subject: [Observium] New install no graphs I'm a beginner, installed observium on Centos 6.5 64bit, I am able to see my device but no graphs. This is what i'm seeing , any help would greatly be appreciated, Thanks Mark [cid:image002.png@01CEF74F.A95B40D0] _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 5

Re: [Observium] sponsoring a feature request.
by Aaron Daniels - Lists 13 Dec '13

13 Dec '13

Thanks Gents, Aaron -------- Original message -------- From: Nikolay Shopik <shopik(a)inblock.ru> Date: 13/12/2013 8:07 AM (GMT+10:00) To: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] sponsoring a feature request. Hey Aaron jira.observium.org - is better place On 13 дек. 2013 г., at 1:03, "Aaron Daniels - Lists" <lists(a)daniels.id.au> wrote: >> Please do not post patches to the list. >> >> Adam. >> > > Sorry Adam, > What is the process for contributing code to the project? > > Thanks, > Aaron > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] New install no graphs
by Josh Hopper 12 Dec '13

12 Dec '13

Add a sysContact to your switch and add it on the device in observium. Click the gear when drilled down to a device. Just the switch one is required but both helps in rare cases. Also, my pleasure. Vmman <vmman50(a)gmail.com> wrote: Joshua thank you very much, that seems to have worked. Sorry to bug you I have another question I'm monitoring a Cisco switch, how do you get the location correct on the global map? Mark On Thu, Dec 12, 2013 at 1:34 PM, Josh Hopper <joshhopper(a)protectplus.com<mailto:joshhopper@protectplus.com>> wrote: You have the same issue I just fixed. Chmod 775 on your rrd folder and make sure you have your cron setup correctly (bottom of the install guide). -- Sincerely, Joshua Hopper, A+ CE Network Administrator [cid:image001.jpg@01CEF74F.A95B40D0] 420 3rd Ave NW Hickory NC 28601 Office: 828-449-1839x2160<tel:828-449-1839x2160> | Cell: 828-855-7565<tel:828-855-7565> From: observium [mailto:observium-bounces@observium.org<mailto:observium-bounces@observium.org>] On Behalf Of Vmman Sent: Thursday, December 12, 2013 3:19 PM To: observium(a)observium.org<mailto:observium@observium.org> Subject: [Observium] New install no graphs I'm a beginner, installed observium on Centos 6.5 64bit, I am able to see my device but no graphs. This is what i'm seeing , any help would greatly be appreciated, Thanks Mark [cid:image002.png@01CEF74F.A95B40D0] _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

New install no graphs
by Vmman 12 Dec '13

12 Dec '13

I'm a beginner, installed observium on Centos 6.5 64bit, I am able to see my device but no graphs. This is what i'm seeing , any help would greatly be appreciated, Thanks Mark [image: Inline image 1]

2 3

Re: [Observium] observium Digest, Vol 41, Issue 32
by Rutger Bevaart 12 Dec '13

12 Dec '13

Checking the Juniper docs it seems that there is MIB support in JUNIPER-VPN-MIB… If I snmpwalk 1.3.6.1.4.1.2636.3.26 I do indeed get the pseudowire status from the box… I put it here: http://pastebin.com/mMuhdKbA 123456789 is the sanitized pseudo wire ID… Not having looked at the Cisco MIB for this, is it remotely similar making this a doable adventure? Regards, Rutger On 12 Dec 2013, at 05:55, observium-request(a)observium.org wrote: > The pseudowire support was written for Cisco specific MIBs. > > I've no idea if Juniper supply comparable MIBs, but it certainly > wouldn't be compatible without writing code (and partially rewriting the > existing cisco code to be more generic). > > Thanks, > adam. > > On 2013-12-11 20:39, Rutger Bevaart wrote: >> Just setup a hybrid Cisco to Juniper pseudo wire. It is detected by >> Observium just fine on the Cisco side, but not on the Juniper side >> showing a half circuit. >> >> Can I somehow get this working without reverting to a Cisco-Cisco >> setup? >> >> Regards >> Rutger >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] Graphs Issue
by Josh Hopper 12 Dec '13

12 Dec '13

Hrm.... I will check this in the AM and update. I thought I installed this to the letter.... Thanks. Sam Gu <sam.gu(a)92cloud.com> wrote: We had similar issue before and finally resolved. Please check your cron and rrd folder permission. Please note that the you cannot use cron -e to add task. �� 2013��12��12��ģ�Josh Hopper д�� Hello Observium Members, I have a slight issue with my graphs. I��ve installed the free version of Observium and can log into the web interface easily. When I add a device to Observium using the CLI it has no issue adding the device. However, when I run a ./poller.php �Ch all it says that there is no rrd directory. All the graphs have a ��Data Error�� on them. So, I create the rrd folder and run again. Then data populates. However, it doesn��t list any graphics for the graphs. The graph is present without issue but there is no traffic. It is all of them (System, Netstats and Poller). -- Sincerely, Joshua Hopper, A+ CE Network Administrator [cid:image003.jpg@01CEF682.B22BCF40] 420 3rd Ave NW Hickory NC 28601 Office: 828-449-1839x2160 | Cell: 828-855-7565

2 2

FW: Graphs Issue
by Josh Hopper 12 Dec '13

12 Dec '13

Hello Observium Members, I have a slight issue with my graphs. I've installed the free version of Observium and can log into the web interface easily. When I add a device to Observium using the CLI it has no issue adding the device. However, when I run a ./poller.php -h all it says that there is no rrd directory. All the graphs have a "Data Error" on them. So, I create the rrd folder and run again. Then data populates. However, it doesn't list any graphics for the graphs. The graph is present without issue but there is no traffic. It is all of them (System, Netstats and Poller). -- Sincerely, Joshua Hopper, A+ CE Network Administrator [cid:image003.jpg@01CEF682.B22BCF40] 420 3rd Ave NW Hickory NC 28601 Office: 828-449-1839x2160 | Cell: 828-855-7565

3 2

Pseudowire Cisco-Juniper monitoring
by Rutger Bevaart 12 Dec '13

12 Dec '13

Just setup a hybrid Cisco to Juniper pseudo wire. It is detected by Observium just fine on the Cisco side, but not on the Juniper side showing a half circuit. Can I somehow get this working without reverting to a Cisco-Cisco setup? Regards Rutger

2 1

observium NGINX report
by Fakrul Alam 12 Dec '13

12 Dec '13

I am trying to pulling nginx nginx_status from observium. But when I run the nginx script I got the following error: ./nginx <<<nginx>>> Traceback (most recent call last): File "./nginx", line 35, in <module> Active = int(params["Reading"]) + int(params["Writing"]) + int(params["Waiting"]) KeyError: 'Reading' Observium is not generating any graph for NGINX. Other SNMP query on that server is ok and I can view all report. Thanks Fakrul

2 2

Graphs Issue
by Josh Hopper 11 Dec '13

11 Dec '13

Hello Observium Members, I have a slight issue with my graphs. I've installed the free version of Observium and can log into the web interface easily. When I add a device to Observium using the CLI it has no issue adding the device. However, when I run a ./poller.php -h all it says that there is no rrd directory. All the graphs have a "Data Error" on them. So, I create the rrd folder and run again. Then data populates. However, it doesn't list any graphics for the graphs. The graph is present without issue but there is no traffic. It is all of them (System, Netstats and Poller). [cid:image001.png@01CEF682.B22BCF40] [cid:image002.png@01CEF682.B22BCF40] -- Sincerely, Joshua Hopper, A+ CE Network Administrator [cid:image003.jpg@01CEF682.B22BCF40] 420 3rd Ave NW Hickory NC 28601 Office: 828-449-1839x2160 | Cell: 828-855-7565

1 0

flexlm checks
by Mihai - Cristian Satmarean 11 Dec '13

11 Dec '13

Hi all, I was looking on the internet for a way to monitor our flexlm licenses, and observium seem that is having the ability to do it. How can I enable it? Thank you!

4 5

Mount points on windows
by Carlos Martinez 10 Dec '13

10 Dec '13

Hello, Is there a way to see mount point storage under storage on a windows server? I have a few exchange servers with all of the drives configured as mount points from the SAN as there are not enough drive letters to add them as local disks. Getting Lun ID's would be great help too. ________________________________ This message may contain confidential or privileged information. If you are not the intended recipient, please advise us immediately and delete this message. See http://www.datapipe.com/legal/email_disclaimer/ for further information on confidentiality and the risks of non-secure electronic communication. If you cannot access these links, please notify us by reply message and we will send the contents to you. Unless otherwise specified in a written agreement, this e-mail neither constitutes an agreement to conduct transactions by electronic means nor creates any legally binding contract or enforceable agreement.

2 1

MIB development
by Johnathon Voegeli 09 Dec '13

09 Dec '13

I am by no means a developer. We currently use a lot of AudioCodes MediaPacks and Mediants for 911 VoIP solutions and are in need of monitoring the traffic from them. Is there anyone out there that would be willing to develop the observium MIB integration for us? We would gladly pay if need be and supply the MIBs. Or could someone point us in the right direction if this is the incorrect place to ask? Thanks! Johnathon

1 0

Adding a MIB
by BERTRAND Adrien [BPCE Assurances] 09 Dec '13

09 Dec '13

Hi, Just a little question about adding a MIB from the CheckPoint Gaia OS to my Observium server : Do I need to restart the service ? Does the file need to have a specific name ? Can I put it in the "CheckPoint" folder directly, or do I need to specify a pointer ? Thanks by advance :-) Sincerely, Adrien BERTRAND Administrateur Sécurité du Système d'Information Information security administrator BPCE Assurances 88 av. de France, 75013 Paris Tel : (+33)1.42.79.47.81 [Description : Q_BPCE_Assurances.jpg]

2 1

snmp and unix-agent question
by Christos Panagiotakis 07 Dec '13

07 Dec '13

It might sounds stupid but I wanted to ask anyway. :-) The same way the snmp works for distro and parsing the distro data, using: extend .1.3.6.1.4.1.2021.7890.1 distro /usr/bin/distro is there a way to use the same or similar for unix-agent ? And parse all the unix-agent data plus any local scripts through snmp ? The purpose to this is to parse the information of workstations behind multiple local networks with one single IP seeing the internet on every lan. So I can use NAT/port forwarding to get different snmpd ports for every workstation on one IP, but I cannot use unix-agent. Is there a way? Thanks in advance, Chris

3 2

Billing/Invoicing Integration Options
by James Bastnagel 06 Dec '13

06 Dec '13

Is anyone aware of any option--built in or 3rd party, that would automate or help in creating invoices based on a template to be sent to customers? I have traffic bills set up within Observium, but this only appears to be about 1/2 the battle. Thank you in advance! James

4 5

Database Query option in footer
by Teixeira, Mike 06 Dec '13

06 Dec '13

Hello, There used to be a database query option in the footer of the page that told you what database queries were used to build the page. I can't seem to find that option in the configuration options. Is that option to have that still available? I used that to see the relationships between the database tables. So in my data warehouse I could create reports concerning billing, links between switches, IOS revisions, etc. Thanks, Mike

1 0

Clarification
by Ryan Milton 06 Dec '13

06 Dec '13

I am not sure how the Unix agent works, or what It's supposed to do. Is it in case one can't get SNMP running-say like on an OpenBSD box? Or am I off? This: http://www.observium.org/wiki/UNIX_Agent Regards, Ryan Milton MVS Network Manager o: 201-447-1505 x124 c: 862-249-5230 www.mvsusa.com<http://www.mvsusa.com/> [MVS final logo GOOD very small]

2 1

Re: [Observium] Graphs stopped working after uppgrading to paid subscription
by Adam Armstrong 06 Dec '13

06 Dec '13

Permissions, only thing that could cause that :) Adam. Gustav UHLANDER <gustav.ulander(a)steria.se> wrote: >Hello. > >Yes i looked into it and all premissions where ok. >However I did remove all the devices that was in the system and readded them and then the Graphs that where blank started to live again. >No idea why though. All billing graphs seems to be working also. >Just thought I would add the solution in my case. > >Bästa hälsningar / Best regards, > >Gustav Uhlander > >-----Original Message----- >From: observium [mailto:observium-bounces@observium.org] On Behalf Of Ellery Weber >Sent: den 4 december 2013 20:12 >To: Observium Network Observation System >Subject: Re: [Observium] Graphs stopped working after uppgrading to paid subscription > >Hey Gustav, > >I had a similar issue when I upgraded from the free to the SVN version, but I resolved it by verifying that apache had rights to the following folders: > >/opt/observium/logs >/opt/observium/rrd >/opt/observium/html > >Thanks, > >Ellery Weber > > > > >From: observium [mailto:observium-bounces@observium.org] On Behalf Of Gustav UHLANDER >Sent: Wednesday, December 4, 2013 8:18 AM >To: Observium Network Observation System >Subject: Re: [Observium] Graphs stopped working after uppgrading to paid subscription > >Hello. >Thanks for reply. >My idea was something on the lines with the following. >If the free version worked with the 13.10 release and subscription release is more or less 6 months newer then that should have better support for 13.10 than free version. >I could be wrong though. >What kind of errors are people experiencing when using 13.10? > >Bästa hälsningar / Best regards, > >Gustav Uhlander > > > >From: observium [mailto:observium-bounces@observium.org] On Behalf Of Jason Ross >Sent: den 4 december 2013 16:08 >To: Observium Network Observation System >Subject: Re: [Observium] Graphs stopped working after uppgrading to paid subscription > >Gustav, > >I'm by no means one of the experts, but in the Installation guide it has this listed. You may want to start with using Ubuntu 13.04. >Ubuntu 13.10 >The new release of Saucy Salamander from Ubuntu has changed enough things that following the installation guide below will not leave you with a working installation. We currently recommend installing using 13.04. > > >From: observium [mailto:observium-bounces@observium.org] On Behalf Of Gustav UHLANDER >Sent: Wednesday, December 04, 2013 1:47 AM >To: observium(a)observium.org >Subject: Re: [Observium] Graphs stopped working after uppgrading to paid subscription > >Hello. > >I installed the free version to get some feel for the software and after that went for a subscription. >When I updated the release the graphs stopped working. >I installed JPgraph and don't have the warning but for some reason the Graphs stay blank. >Running fresh install of Ubuntu 13.10 >I deleted the hole observium folder together with Apache webserver (I imagined I missed a step somewhere or similarly) And then reinstalled from fresh Still cant get the graphs to show. >It polls nicely and I get the RRD files but for some reason it seems that they don't end up being graphed. > >Any ideas? > >Bästa hälsningar / Best regards,. > >Gustav Uhlander > > >This message (including any attachments) is intended only for the use of a specific individual or entity or specific individuals or entities and may contain information that is non-public, proprietary, privileged, confidential, and exempt from disclosure under applicable law or may constitute as attorney work product. If you are not the intended recipient, you are hereby notified that any use, dissemination, distribution, or copying of this communication is strictly prohibited and may represent a tortious interference with a confidential business relationship(s). If you have received this communication in error, please notify us immediately by telephone and (i) permanently destroy this message if a facsimile; (ii) permanently delete this message immediately if this is an electronic communication; permanently destroy any electronic or printed copies of this electronic communication. >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >----- >No virus found in this message. >Checked by AVG - www.avg.com >Version: 2014.0.4259 / Virus Database: 3657/6889 - Release Date: 12/03/13 >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] Graphs stopped working after uppgrading to paid subscription
by Gustav UHLANDER 06 Dec '13

06 Dec '13

Hello. Yes i looked into it and all premissions where ok. However I did remove all the devices that was in the system and readded them and then the Graphs that where blank started to live again. No idea why though. All billing graphs seems to be working also. Just thought I would add the solution in my case. Bästa hälsningar / Best regards, Gustav Uhlander -----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Ellery Weber Sent: den 4 december 2013 20:12 To: Observium Network Observation System Subject: Re: [Observium] Graphs stopped working after uppgrading to paid subscription Hey Gustav, I had a similar issue when I upgraded from the free to the SVN version, but I resolved it by verifying that apache had rights to the following folders: /opt/observium/logs /opt/observium/rrd /opt/observium/html Thanks, Ellery Weber From: observium [mailto:observium-bounces@observium.org] On Behalf Of Gustav UHLANDER Sent: Wednesday, December 4, 2013 8:18 AM To: Observium Network Observation System Subject: Re: [Observium] Graphs stopped working after uppgrading to paid subscription Hello. Thanks for reply. My idea was something on the lines with the following. If the free version worked with the 13.10 release and subscription release is more or less 6 months newer then that should have better support for 13.10 than free version. I could be wrong though. What kind of errors are people experiencing when using 13.10? Bästa hälsningar / Best regards, Gustav Uhlander From: observium [mailto:observium-bounces@observium.org] On Behalf Of Jason Ross Sent: den 4 december 2013 16:08 To: Observium Network Observation System Subject: Re: [Observium] Graphs stopped working after uppgrading to paid subscription Gustav, I'm by no means one of the experts, but in the Installation guide it has this listed. You may want to start with using Ubuntu 13.04. Ubuntu 13.10 The new release of Saucy Salamander from Ubuntu has changed enough things that following the installation guide below will not leave you with a working installation. We currently recommend installing using 13.04. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Gustav UHLANDER Sent: Wednesday, December 04, 2013 1:47 AM To: observium(a)observium.org Subject: Re: [Observium] Graphs stopped working after uppgrading to paid subscription Hello. I installed the free version to get some feel for the software and after that went for a subscription. When I updated the release the graphs stopped working. I installed JPgraph and don't have the warning but for some reason the Graphs stay blank. Running fresh install of Ubuntu 13.10 I deleted the hole observium folder together with Apache webserver (I imagined I missed a step somewhere or similarly) And then reinstalled from fresh Still cant get the graphs to show. It polls nicely and I get the RRD files but for some reason it seems that they don't end up being graphed. Any ideas? Bästa hälsningar / Best regards,. Gustav Uhlander This message (including any attachments) is intended only for the use of a specific individual or entity or specific individuals or entities and may contain information that is non-public, proprietary, privileged, confidential, and exempt from disclosure under applicable law or may constitute as attorney work product. If you are not the intended recipient, you are hereby notified that any use, dissemination, distribution, or copying of this communication is strictly prohibited and may represent a tortious interference with a confidential business relationship(s). If you have received this communication in error, please notify us immediately by telephone and (i) permanently destroy this message if a facsimile; (ii) permanently delete this message immediately if this is an electronic communication; permanently destroy any electronic or printed copies of this electronic communication. _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2014.0.4259 / Virus Database: 3657/6889 - Release Date: 12/03/13

1 0

billing feature
by Damien Burke 06 Dec '13

06 Dec '13

Hello, Are there any plans to expand the billing feature of observium? Damien Burke Chief Executive Officer SupremeBytes, LLC P.O. Box 13746 | Columbus, Ohio 43213 Office (614) 636-4923 | Phone (614) 636-4875 | Fax (614) 636-4877 http://www.supremebytes.com<http://www.supremebytes.com/>

3 4

Reporting vulnerabilities
by Daniel Hood 05 Dec '13

05 Dec '13

Hi, Who is best to report vulnerabilities in Observium to? I have a couple but I'd rather not publicly announce them due to the security nature of them. Regards, Daniel

2 1

graphing question
by Joshua Elson 05 Dec '13

05 Dec '13

Hi guys, I have a question on graphing. Last week I took some screen shots of our graphs for a specific simulation and then checked again this week for the exact same time periods and the numbers are the same, but the graphs are different. How does the graphing work exactly? In this first picture, we were wondering why the 225.05k isn't showing on the graph. It only goes up to 40k: [cid:image001.jpg@01CEF109.7988A100] When I checked this exact same graph with the same date and time stamp a week later, the numbers are the exact same, but the graph has changed although still doesn't go up to 225.05k, but does go up higher to 75k: [cid:image002.jpg@01CEF109.7988A100] Any help or insight is greatly appreciated! Thanks, Josh ________________________________ This electronic mail (including any attachments) may contain information that is privileged, confidential, and/or otherwise protected from disclosure to anyone other than its intended recipient(s). Any dissemination or use of this electronic mail or its contents (including any attachments) by persons other than the intended recipient(s) is strictly prohibited. If you have received this message in error, please notify us immediately by reply e-mail so that we may correct our internal records. Please then delete the original message (including any attachments) in its entirety.

1 0

Re: [Observium] Graphs stopped working after uppgrading to paid subscription
by Gustav UHLANDER 04 Dec '13

04 Dec '13

Hello. I installed the free version to get some feel for the software and after that went for a subscription. When I updated the release the graphs stopped working. I installed JPgraph and don't have the warning but for some reason the Graphs stay blank. Running fresh install of Ubuntu 13.10 I deleted the hole observium folder together with Apache webserver (I imagined I missed a step somewhere or similarly) And then reinstalled from fresh Still cant get the graphs to show. It polls nicely and I get the RRD files but for some reason it seems that they don't end up being graphed. Any ideas? Bästa hälsningar / Best regards,. Gustav Uhlander

4 4

Observium pro
by Abdel Ghazal 03 Dec '13

03 Dec '13

Hi I new to observium I already paid the subscription fee but I did not get any uesrname or password any help B.S Abdel

3 5