- observium - lists.observium.org

New user - Few questions
by Simon Mott 26 May '13

26 May '13

Hi all im pretty new to observium but i am loving how easy it is to use so far! I have a couple of minor issues though 1) i have added two servers that are configured almost identically and observium has only picked up the lm-sensors info for one of them - is there a way i can force it to get this info from the second server? 2) On the note of lm-sensors - Observium is parsing the output of lm-sensors and treating the threshold values as actual sensors - can i make it just outright not graph these whilst keeping the actual sensor data? 3) I have a windows server added to observium and i am getting a load of ports that i dont care about - same question as above - can i make observium ignore these ports and not even list them/try to graph them? 4) i have unix agent installed on a server exposing hddtemp data but sometimes when observium polls it doesnt detect all hard disks or sometimes none at all (whilst at the same time i confirm hddtemp is working as expected and showing all disks) Any ideas whats causing this? Thanks

3 3

Re: [Observium] A couple questions..
by Adam Armstrong 24 May '13

24 May '13

It used to just be appended to ports page URLs. Is the default basic? It should be detailed! Adam. Tom Laermans <tom.laermans(a)powersource.cx> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Re: [Observium] A couple questions..
by Adam Armstrong 24 May '13

24 May '13

Does that option still work? I thought it died when we changed the URL format? Adam. Chris Stone <axisml(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 2

A couple questions..
by Jason Lixfeld 24 May '13

24 May '13

Hi, Is it possible to change the default ports display for a device from Basic to Details? Also, can I filter the display only to show interfaces that match a certain criteria. ie: Admin = Up, Oper = Up, Type = Ethernet or L2 VLAN (802.1q) or IEEE 803.2ad Link Agg? I find that the default display shows a lot of stuff for interfaces that I'm not particularly interested in, so I'd like to be able to clean that up. I know I can toggle polling on a per-device basis, but I'm hoping there's a method that is a little more dynamic than that. Thanks in advance.

2 1

Billing Graph Legend
by Adam Summerfield 24 May '13

24 May '13

Adam, I may be stupid but… In the legend for the interfaces there is Current Average and Maximum. At the bottom under the interfaces there are two Total rows with four columns. What actually are the four columns? Regards, Adam

1 0

Re: [Observium] Service Account No Logout
by Adam Armstrong 24 May '13

24 May '13

I literally log in once or twice per year. Including reboots. I rather think we have it a little too easy :) Adam. Tom Laermans <tom.laermans(a)powersource.cx> wrote: >If you autorefresh and click "remember me" I -think- your session should >stay alive. But i'm only 80% sure. :) > >On 23/05/2013 20:41, Nikolay Shopik wrote: >> Kinda weird we don't see such problem, constantly have open window with >> observium. Probably some local problem. >> >> On 23.05.2013 22:14, Wes Kennedy wrote: >>> Is there a way to have a user (service account) that won't get logged out of the web interface? We want to display this up on big screens in our NOC, but keep getting logged out. Thanks, Wes >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Canon printers
by Matthew Coene 23 May '13

23 May '13

Good afternoon anyone... Was just curious as to whether anyone has had any luck integrating MIBS so Canon iR series can be parsed as proper printers and have stats / toner polled correctly?? I was a little spoiled at my last position where all printers were HP / Konica and supported out of the box... Now not so much... Thanks in advance... Matt.C.

1 0

Service Account No Logout
by Wes Kennedy 23 May '13

23 May '13

Is there a way to have a user (service account) that won't get logged out of the web interface? We want to display this up on big screens in our NOC, but keep getting logged out. Thanks, Wes

4 3

Re: [Observium] NFS - APPS or nfsstat can be graphed with obserium?
by Adam Armstrong 23 May '13

23 May '13

The agent is currently only used for the applications framework, and for passing ipmi sensors. The apache script, for example. Adam. Mihai - Cristian Satmarean <mihai.satmarean(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] NFS - APPS or nfsstat can be graphed with obserium?
by Adam Armstrong 23 May '13

23 May '13

We do not use that information. That stuff is left over from check_mk. We don't use it. Adam. Mihai - Cristian Satmarean <mihai.satmarean(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Re: [Observium] NFS - APPS or nfsstat can be graphed with obserium?
by Adam Armstrong 23 May '13

23 May '13

We do not use any of the information returned by check_mk. We only use information returned by our own scripts. Adam Mihai - Cristian Satmarean <mihai.satmarean(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Re: [Observium] NFS - APPS or nfsstat can be graphed with obserium?
by Adam Armstrong 23 May '13

23 May '13

We don't generate graphs from any of the default check_mk output. We merely used it as a template to build the Observium agent. To build graphs from any of the data you get from the Solaris agent, you'd have to write code for it. Adam. Mihai - Cristian Satmarean <mihai.satmarean(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Re: [Observium] NFS - APPS or nfsstat can be graphed with obserium?
by Adam Armstrong 23 May '13

23 May '13

It won't work on omnios, it is linux-only. We currently have almost zero support for solaris-derrived oses. Adam. Mihai - Cristian Satmarean <mihai.satmarean(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 7

Re: [Observium] IPMI Problems FIX
by Adam Armstrong 22 May '13

22 May '13

Or follow @observium_svn, or the RSS feed from fisheye... Adam. Nikolay Shopik <shopik(a)inblock.ru> wrote: >You can subscribe to >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium-dev > >or dig thorough svn repository > >On 22/05/13 17:03, Thomas Raabo - Zitcom A/S wrote: >> Where do i find changelogs? >> >> Med venlig hilsen | Best regards >> Thomas Raabo >> Senior Network Engineer CCIE #33466 >> >> >> >> _____________________________________________ >> tr(a)zitcom.dk | Direkte: +45 69 10 60 18 | Tlf.: +45 70 23 55 66 >> >> -----Original Message----- >> From: observium [mailto:observium-bounces@observium.org] On Behalf Of Mike Stupalov >> Sent: 22. maj 2013 14:51 >> To: Observium Network Observation System >> Subject: Re: [Observium] IPMI Problems FIX >> >> >> IPMI polling fixed in r4053 ;) >> >> On Ср. 22 мая 2013 00:16:06, Nikolay Shopik wrote: >>> Here I just fixed for ya. If you guys having these issues just revert >>> back ipmi.inc.php to 3739 revision, this should fix for most of you. >>> >>> svn update -r 3739 observium/includes/polling/ipmi.inc.php >>> >>> On 21.05.2013 23:16, Tom Laermans wrote: >>>> I don't - it works for me, but something is different it seems. >>>> >>>> I just don't have the time to fix it at this point in time, and the >>>> continuous nagging on IRC was not helping in allocating resources ;-) >>>> >>>> On 21/05/2013 18:42, Adam Armstrong wrote: >>>>> Good luck convincing Tom that it's actually a real problem. >>>>> >>>>> He still thinks you're all hallucinating :) >>>>> >>>>> adam. >>>>> >>>>> On 2013-05-21 15:56, Todd Kline wrote: >>>>>> I am also seeing the add, delete issue on each polling cycle… >>>>>> >>>>>> 2013-05-21 09:45:50 System Sensor Deleted: temperature ipmi 2 CPU >>>>>> Temp >>>>>> 2013-05-21 09:45:50 System Sensor Deleted: temperature ipmi 1 >>>>>> System Temp >>>>>> 2013-05-21 09:45:50 System Sensor Deleted: voltage ipmi 12 VBAT >>>>>> 2013-05-21 09:45:50 System Sensor Deleted: voltage ipmi 11 +3.3VSB >>>>>> 2013-05-21 09:45:50 System Sensor Deleted: voltage ipmi 10 +12 V >>>>>> 2013-05-21 09:45:50 System Sensor Deleted: voltage ipmi 9 +5 V >>>>>> 2013-05-21 09:45:50 System Sensor Deleted: voltage ipmi 8 VDIMM >>>>>> 2013-05-21 09:45:50 System Sensor Deleted: voltage ipmi 7 +3.3VCC >>>>>> 2013-05-21 09:45:50 System Sensor Deleted: voltage ipmi 6 Vichcore >>>>>> 2013-05-21 09:45:50 System Sensor Deleted: voltage ipmi 5 CPU Vcore >>>>>> 2013-05-21 09:45:49 System Sensor Added: voltage ipmi 12 VBAT >>>>>> 2013-05-21 09:45:49 System Sensor Added: voltage ipmi 11 +3.3VSB >>>>>> 2013-05-21 09:45:49 System Sensor Added: voltage ipmi 10 +12 V >>>>>> 2013-05-21 09:45:49 System Sensor Added: voltage ipmi 9 +5 V >>>>>> 2013-05-21 09:45:49 System Sensor Added: voltage ipmi 8 VDIMM >>>>>> >>>>>> build 4047 >>>>>> >>>>>> Thanks >>>>>> Todd >>>>>> >>>>>> >>>>>> >>>>>> On May 20, 2013, at 5:45 PM, Tom Laermans >>>>>> <tom.laermans(a)powersource.cx> wrote: >>>>>> >>>>>> Works perfectly for me, are you saying I can just keep a stack of >>>>>> A4 ready? :> >>>>>> >>>>>> On 20/05/2013 20:58, Adam Armstrong wrote: >>>>>> The ipmi stuff is known to work about as well as a fire blanket >>>>>> made of paper. :-) >>>>>> >>>>>> Adam. >>>>>> >>>>>> observium(a)velder.li wrote: >>>>>> >>>>>> Hello there >>>>>> >>>>>> I just remembered that i cannot see any IPMI infos anymore in observium? >>>>>> There are also a lot of messages: >>>>>> >>>>>> 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: >>>>>> fanspeed ipmi >>>>>> 4 FAN 2 >>>>>> 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: >>>>>> fanspeed ipmi >>>>>> 3 FAN 1 >>>>>> 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: >>>>>> fanspeed ipmi >>>>>> 5 FAN 3 >>>>>> 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: >>>>>> fanspeed ipmi >>>>>> 7 FAN A >>>>>> 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: >>>>>> temperature >>>>>> ipmi 1 System Temp >>>>>> 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: >>>>>> voltage ipmi 8 >>>>>> Vcore >>>>>> 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: >>>>>> voltage ipmi 9 >>>>>> 3.3VCC >>>>>> 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: >>>>>> voltage ipmi >>>>>> 10 12V >>>>>> 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: >>>>>> voltage ipmi >>>>>> 11 VDIMM >>>>>> 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: >>>>>> voltage ipmi >>>>>> 16 AVCC >>>>>> 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: >>>>>> voltage ipmi >>>>>> 15 VSB >>>>>> 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: >>>>>> voltage ipmi >>>>>> 14 VBAT >>>>>> 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: >>>>>> voltage ipmi >>>>>> 13 -12V >>>>>> 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: >>>>>> voltage ipmi >>>>>> 12 5VCC >>>>>> 2013-05-20 20:55:06 vmhost01.dc System Sensor Added: >>>>>> voltage ipmi 16 >>>>>> AVCC >>>>>> >>>>>> >>>>>> Is that a known bug? >>>>>> >>>>>> Regards >>>>>> Patrick >>>>>> _______________________________________________ >>>>>> observium mailing list >>>>>> observium(a)observium.org >>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>> _______________________________________________ >>>>>> observium mailing list >>>>>> observium(a)observium.org >>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>> >>>>>> _______________________________________________ >>>>>> observium mailing list >>>>>> observium(a)observium.org >>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>>> >>>>>> _______________________________________________ >>>>>> observium mailing list >>>>>> observium(a)observium.org >>>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>>> _______________________________________________ >>>>> observium mailing list >>>>> observium(a)observium.org >>>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>> >>>> _______________________________________________ >>>> observium mailing list >>>> observium(a)observium.org >>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> >> >> -- >> Mike Stupalov >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] IPMI Problems
by Adam Armstrong 22 May '13

22 May '13

The ipmi stuff is known to work about as well as a fire blanket made of paper. :-) Adam. observium(a)velder.li wrote: >Hello there > >I just remembered that i cannot see any IPMI infos anymore in observium? >There are also a lot of messages: > >2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: fanspeed ipmi >4 FAN 2 >2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: fanspeed ipmi >3 FAN 1 >2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: fanspeed ipmi >5 FAN 3 >2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: fanspeed ipmi >7 FAN A >2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: temperature >ipmi 1 System Temp >2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: voltage ipmi 8 >Vcore >2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: voltage ipmi 9 >3.3VCC >2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: voltage ipmi >10 12V >2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: voltage ipmi >11 VDIMM >2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: voltage ipmi >16 AVCC >2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: voltage ipmi >15 VSB >2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: voltage ipmi >14 VBAT >2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: voltage ipmi >13 -12V >2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: voltage ipmi >12 5VCC >2013-05-20 20:55:06 vmhost01.dc System Sensor Added: voltage ipmi 16 >AVCC > > >Is that a known bug? > >Regards >Patrick >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

IPV6 BGP Session Alerts
by Mahomed Hussein 22 May '13

22 May '13

Hi I’ve noticed that Observium has a very useful “BGP Alerts” section (among all its other useful sections :-) ) that shows all the BGP sessions/neighbours that are down etc. But it doesn’t seem to show IPv6 sessions. Is this because this isn’t currently supported or is there something that needs to be changed in the config? Thanks in advance. Kind regards, Mahomed Hussein Custodian Data Centre Email: Mahomed(a)CustodianDC.com http://www.CustodianDC.com

2 1

Kickstarter Project
by Adam Armstrong 22 May '13

22 May '13

Hi All, Just a reminder that the Kickstarter project has 2 days left to go, in case any of you were leaving it until the last minute :) http://www.kickstarter.com/projects/588464062/observium-alerting We can also use PayPal (which doesn't take the 5% fee that Kickstarter takes, either!) Thanks to everyone who has funded it so far! adam.

1 0

how to disable reading mac-address-table via snmp?
by norbi 21 May '13

21 May '13

hi List, how can i disable the reading of the entire mac-address-table from switches? problem is, we have about 4000 ports, 129 switches, and snmpbulkwalk needs about 22sec for one run, because the mac-address-table from uplinkports are to big. norbert

4 4

FDB Table
by Dario Calamai 21 May '13

21 May '13

Hi All! I have a new job in a new provider and Observium is up, again! :) my FDB Table is empty, still working in progress? I had a quick look to the code and I think that somethings in includes/polling/q-bridge-mib-fdb.inc.php have to be change for example dot1qTpFdbEntry is not working with my cisco 2960/3750, but dot1dTpFdbEntry does! [line 27] another example is that the function to search per-vlan mac-address is missing, now shows only the mac-addr in vlan1 [add "-c <community>@700" to snmpwalk command for vlan 700] Thanks, -- dario calamai http://www.linkedin.com/in/dariocalamai

2 1

Map Missing
by Wes Kennedy 21 May '13

21 May '13

I recently update to 4040 and now the map isn't showing up for me. Where do I go to enable it? -Wes

3 2

dell force10 s4810 mib and dell m1000e blade chassis
by Mihai - Cristian Satmarean 21 May '13

21 May '13

Dear all, please instruct me how to install the dell force 10 s4810 to be correctly discovered by observium, also the same problem with Dell blade chassis M1000e. Thank you!

5 15

Re: [Observium] <testing>
by Adam Armstrong 20 May '13

20 May '13

Idiot. Tyler Treat <tyler.treat(a)royell.org> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 2

<testing>
by Tyler Treat 20 May '13

20 May '13

Test message. ___________________________ Tyler Treat ___________________________

1 0

Re: [Observium] IPMI Problems
by Adam Armstrong 20 May '13

20 May '13

Remove them with a SQL query on the event log table. :-) observium(a)velder.li wrote: >OK ;-) > >Last problem: tons of following entries in the log: > > >2013-05-19 19:35:24 System sysObjectID -> .1.3.6.1.4.1.8072.3.2.10 >2013-05-19 19:00:23 System sysObjectID -> .1.3.6.1.4.1.8072.3.2.10 >2013-05-19 18:55:24 System sysObjectID -> .1.3.6.1.4.1.8072.3.2.10 >2013-05-19 18:52:20 System sysObjectID -> .1.3.6.1.4.1.8072.3.2.10 >2013-05-19 18:50:23 System sysObjectID -> .1.3.6.1.4.1.8072.3.2.10 >2013-05-19 18:50:04 System sysObjectID -> .1.3.6.1.4.1.8072.3.2.10 >2013-05-19 18:47:52 System sysObjectID -> .1.3.6.1.4.1.8072.3.2.10 >2013-05-19 18:45:35 System sysObjectID -> .1.3.6.1.4.1.8072.3.2.10 >2013-05-19 18:45:25 System sysObjectID -> .1.3.6.1.4.1.8072.3.2.10 >2013-05-19 18:42:28 System sysObjectID -> .1.3.6.1.4.1.8072.3.2.10 >2013-05-19 18:40:24 System sysObjectID -> .1.3.6.1.4.1.8072.3.2.10 >2013-05-19 18:35:24 System sysObjectID -> .1.3.6.1.4.1.8072.3.2.10 > > > >Is there a possibility to hide them? > > >Regards > > > > >Am 20.05.2013 20:58, schrieb Adam Armstrong: >> The ipmi stuff is known to work about as well as a fire blanket made >> of paper. :-) >> >> Adam. >> >> observium(a)velder.li wrote: >> >> Hello there >> >> I just remembered that i cannot see any IPMI infos anymore in >> observium? >> There are also a lot of messages: >> >> 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: fanspeed ipmi >> 4 FAN 2 >> 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: fanspeed ipmi >> 3 FAN 1 >> 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: fanspeed ipmi >> 5 FAN 3 >> 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: fanspeed ipmi >> 7 FAN A >> 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: temperature >> ipmi 1 System Temp >> 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: voltage ipmi >> 8 >> Vcore >> 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: voltage ipmi >> 9 >> 3.3VCC >> 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: voltage ipmi >> 10 12V >> 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: voltage ipmi >> 11 VDIMM >> 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: voltage ipmi >> 16 AVCC >> 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: voltage ipmi >> 15 VSB >> 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: voltage ipmi >> 14 VBAT >> 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: voltage ipmi >> 13 -12V >> 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: voltage ipmi >> 12 5VCC >> 2013-05-20 20:55:06 vmhost01.dc System Sensor Added: voltage ipmi 16 >> AVCC >> >> >> Is that a known bug? >> >> Regards >> Patrick >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

IPMI Problems
by observium＠velder.li 20 May '13

20 May '13

Hello there I just remembered that i cannot see any IPMI infos anymore in observium? There are also a lot of messages: 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: fanspeed ipmi 4 FAN 2 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: fanspeed ipmi 3 FAN 1 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: fanspeed ipmi 5 FAN 3 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: fanspeed ipmi 7 FAN A 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: temperature ipmi 1 System Temp 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: voltage ipmi 8 Vcore 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: voltage ipmi 9 3.3VCC 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: voltage ipmi 10 12V 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: voltage ipmi 11 VDIMM 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: voltage ipmi 16 AVCC 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: voltage ipmi 15 VSB 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: voltage ipmi 14 VBAT 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: voltage ipmi 13 -12V 2013-05-20 20:55:06 vmhost01.dc System Sensor Deleted: voltage ipmi 12 5VCC 2013-05-20 20:55:06 vmhost01.dc System Sensor Added: voltage ipmi 16 AVCC Is that a known bug? Regards Patrick

1 0