- observium - lists.observium.org

Polling Rate on a 3750 Stack
by Michael Sweikata 18 Apr '13

18 Apr '13

Is anyone else having huge response times in their polling of a Cisco 3750 stack? I've increased the number of pollers I have to something close to 17, but my 3750s seem to take forever to respond (anywhere between 200 - 999.99+ seconds). It may be an issue on my 3750s, but my polling intervals on my devices is several hours. I have 2950s and 6509s that don't seem to have any issue responding in a short amount of time (<20 seconds).

6 11

Re: [Observium] missing directories in observium
by Tom Laermans 17 Apr '13

17 Apr '13

Ladies and gentlemen, Adam is practicing for his commercial support idea. How would you rate this response on a scale from 1 to A++ WOULD SVN UP AGAIN? ;-) Sent from my mobile, please excuse brevity and spelling errors. ----- Reply message ----- From: "Adam Armstrong" <adama(a)memetic.org> To: "Observium Network Observation System" <observium(a)observium.org> Subject: [Observium] missing directories in observium Date: Wed, Apr 17, 2013 09:14 On Thu, 11 Apr 2013 19:54:09 +0000, LUKE REAGOR <LUKE.REAGOR(a)sville.us> wrote: > I just installed Observium following the instructions on > http://www.observium.org/wiki/Ubuntu_SVN_Installation and it all went on > with no problems. When I go to the url http://localhost I get the logon for > Observium. When I log on, I get the page showing the world map and > everything looks good. However, when I click on any link I get a 404 saying > it doesn't exist. Ex. when I click on Add User, I get a 404 saying > /adduser/ was not found. I look in the filesystem and don't see those > directories in /opt/observium or /opt/observium/html. Did it not get > all the directories and files from the svc? I did that part three times to > make sure. I even look in the svc > (http://www.observium.org/svn/observer/trunk) from a web browser and can't > find those directories. Hi, You're missing mod_rewrite or AllowOverride All on the directory in the Apache configuration. Thanks, adam. _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 2

missing directories in observium
by LUKE REAGOR 17 Apr '13

17 Apr '13

I just installed Observium following the instructions on http://www.observium.org/wiki/Ubuntu_SVN_Installation and it all went on with no problems. When I go to the url http://localhost I get the logon for Observium. When I log on, I get the page showing the world map and everything looks good. However, when I click on any link I get a 404 saying it doesn't exist. Ex. when I click on Add User, I get a 404 saying /adduser/ was not found. I look in the filesystem and don't see those directories in /opt/observium or /opt/observium/html. Did it not get all the directories and files from the svc? I did that part three times to make sure. I even look in the svc (http://www.observium.org/svn/observer/trunk) from a web browser and can't find those directories. Luke Reagor Network Administrator Stephenville ISD "I am not a teacher only a fellow traveller of whom you asked the way. I pointed ahead ahead of myself as well as of you." -George Bernard Shaw

2 1

Re: [Observium] Observium Enterprise/Pro licensing
by Adam Armstrong 16 Apr '13

16 Apr '13

For the port-based model we would likely exclude virtual ports. It would likely only exist to catch users with 8 vss and 10k ports :-) In terms of support and development, we would likely push all new feature development to the commercial version. Support and feature requests from licensees would be prioritised too. This is already the case for our existing commercial sponsor. Roughly 50% of development work is directly requested features from them. We certainly want to keep the free version usable, and we don't want to separate the code bases, as that would slow progress a lot. I think the balance between keeping everything usable and maintaining a carrot to encourage people to license will be difficult. Pricing is also difficult to decide on. If the majority of users won't pay, it will be higher than if we have more licensees. If every user paid $10, we would probably be fine. I suspect not even 5% will be willing to pay, though. Adam. "Hibler, Florian" <florian.hibler(a)kaiaglobal.com> wrote: >Hi Adam, >thanks for telling the list about your thoughts on commercializing >Observium and giving us the opportunity to talk about the licensing >scheme before you actually decide which way to go. > >I need to agree with Nikolay, that "port-based" shouldn't be the way to >go, as many devices just add tons of virtual ports. For me "host-based" >sounds pretty fair. > >Also I would prefer to use the "honor system" route as well. Keepeing >the source code open makes it still easy for people to contribute to >certain features or customize Observium for their own needs. Once a >product is commercialized you will have piracy, thats what I am pretty >sure of. Although I am pretty sure that this community will honor your >work and what you have done. Observium is a great product and it helps >me with my daily work. > >Can you already outline some pricing you have in mind and/or the >differences between free/pro/enterprise editions? Once there is money >behind that whole thing, what would actually change? How would you deal >with the support, feature requests, etc.? > >Just my 2 cent and hope it was a bit helpful! > >Best regards, >Florian > >-- >Florian Hibler >Chief Technical Officer >eMail: florian.hibler(a)kaiaglobal.com > >Kaia Global Networks Limited >Internet: http://www.kaiaglobal.com >Company No. 08257877 >Registered Office: High Wycombe, UK > >Notice: This transmittal and/or attachments may be privileged or >confidential. If you are not the intended recipient, you are hereby >notified that you have received this transmittal in error; any review, >dissemination, or copying is strictly prohibited. If you received this >transmittal in error, please notify us immediately by reply and >immediately delete this message and all its attachments. Thank you. > >On 4/15/13 24:58, Adam Armstrong wrote: >> >> Hi All, >> >> At some point in the future it's likely that I'm going to split Observium >> into free and enterprise/pro variants. >> >> Observium has historically been developed as a fairly ad hoc project, with >> work being done as time permits between work projects. We've often had gaps >> of 6 months where there has been little work done due to other commitments. >> >> As the user-base expands this is going to become less and less viable a >> way of maintaining the project, and we need to be able to devote more time >> to keeping on top of bug reports and feature development. To be able to >> devote more time to the project we need to establish a revenue stream to be >> able to support it. >> >> We'd like comments from you guys about how we should go about splitting, >> what should be in each version, and what we should charge. >> >> We're considering: >> >> A hosts/ports-based licensing scheme, where you get a certain number free, >> and any more than that requires a license. >> A feature-based licensing scheme, where higher-value features such as load >> balancers, netapp, mac accounting, vpn tracking, etc require a license. >> Licensing for customer-access, where allowing customers access to the web >> interface requires a license. >> >> What pricing models do you think would work? >> >> Options for the ent/pro version include using the honour system, >> maintaining a separate password-protected SVN repository or distributing an >> ioncube-protected version. >> >> I would prefer to go the honour system route, but I'm not sure how well >> that would work. >> >> Thanks, >> adam. >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

7 11

Re: [Observium] Observium Enterprise/Pro licensing
by Adam Armstrong 16 Apr '13

16 Apr '13

Shut up, heretic. Tom Laermans <tom.laermans(a)powersource.cx> wrote: >On Tue, 2013-04-16 at 11:58 +0200, Sebastien Guilbaud wrote: >> >> With regards to "paying members get extra rights and decent >> support", >> this is certainly the goal. BOFH-replies on the mailing list >> will stay >> for the community support though ;> >> >> >> The day Adam answers politely about nginx problems will be the sign of >> severe mental illness :-) >> > >For extra fun, add in PostgreSQL and Ruby. Maybe Lighty? > >Tom > > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] webpage showing "device" path not found
by Ben .T.George 16 Apr '13

16 Apr '13

Thanks that solved. by doing some changes in virtualhost's i followed http://www.observium.org/wiki/RHEL_SVN_Installation this for installation. now my 2 servers listing under devices tab. but on the main page i am getting one "permission denied" error message with red background. Also when i click client name top right corner 4 graphs are not loading and the error message showing there is "Draw Error" regards Ben On Tue, Apr 16, 2013 at 9:56 AM, Dermot Williams <dermot(a)deadlocked.org>wrote: > Make sure you've enabled mod_rewrite (per the instructions) and that > there's a file called .htaccess in DocumentRoot. Oh, and that that file > actually has stuff in it. > > Dermot > > > On Tue, Apr 16, 2013 at 7:37 AM, Tom Laermans <tom.laermans(a)powersource.cx > > wrote: > >> Hi Ben. >> >> Again, another mail indicating you did not follow the documentation and >> the installation was not done correctly. >> >> Please reinstall Observium following ALL of the instructions as detailed >> on the web page. >> >> Tom >> >> >> On 16/04/2013 6:39, Ben .T.George wrote: >> >> HI >> >> I installed and configured observium as per the document mentioned on >> wiki . looks like everything is working and i got the web gui.I added 2 >> devices. it's showing 2 devices added and it's up.. But when i click on any >> of the hostname, it's giving the error like "404 the requested URL >> /devices/ was not found on this server >> >> I check on the html directory and the device folder is not there. How to >> fix this isse.? >> >> Thanks & Regards, >> Ben >> >> >> >> _______________________________________________ >> observium mailing listobservium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >

1 0

webpage showing "device" path not found
by Ben .T.George 16 Apr '13

16 Apr '13

HI I installed and configured observium as per the document mentioned on wiki . looks like everything is working and i got the web gui.I added 2 devices. it's showing 2 devices added and it's up.. But when i click on any of the hostname, it's giving the error like "404 the requested URL /devices/ was not found on this server I check on the html directory and the device folder is not there. How to fix this isse.? Thanks & Regards, Ben

3 2

Re: [Observium] Observium Enterprise/Pro licensing
by Adam Armstrong 15 Apr '13

15 Apr '13

I suppose and important question would be, given a realistic pricing model, how many of you would, in principle, pay for a license, and how many of you would make do with whatever remains free? Adam. Adam Armstrong <adama(a)observium.org> wrote: > >Hi All, > >At some point in the future it's likely that I'm going to split Observium >into free and enterprise/pro variants. > >Observium has historically been developed as a fairly ad hoc project, with >work being done as time permits between work projects. We've often had gaps >of 6 months where there has been little work done due to other commitments. > >As the user-base expands this is going to become less and less viable a >way of maintaining the project, and we need to be able to devote more time >to keeping on top of bug reports and feature development. To be able to >devote more time to the project we need to establish a revenue stream to be >able to support it. > >We'd like comments from you guys about how we should go about splitting, >what should be in each version, and what we should charge. > >We're considering: > >A hosts/ports-based licensing scheme, where you get a certain number free, >and any more than that requires a license. >A feature-based licensing scheme, where higher-value features such as load >balancers, netapp, mac accounting, vpn tracking, etc require a license. >Licensing for customer-access, where allowing customers access to the web >interface requires a license. > >What pricing models do you think would work? > >Options for the ent/pro version include using the honour system, >maintaining a separate password-protected SVN repository or distributing an >ioncube-protected version. > >I would prefer to go the honour system route, but I'm not sure how well >that would work. > >Thanks, >adam. >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

host adding command not completing
by Ben .T.George 15 Apr '13

15 Apr '13

HI i tried to add host , please check the below section: ./addhost.php ben.test.net any v2c Trying community any ... No reply on community any using v2c Could not reach ben.test.net with given SNMP community using v2c Trying community any ... No reply on community any using v2c Could not reach ben.test.net with given SNMP community using v2c Observium v0.13.4.3917 Add Host Tool Usage (SNMPv1/2c): ./addhost.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6] Usage (SNMPv3) : Config Defaults : ./addhost.php <hostname> any v3 [user] [port] [udp|udp6|tcp|tcp6] No Auth, No Priv : ./addhost.php <hostname> nanp v3 [user] [port] [udp|udp6|tcp|tcp6] Auth, No Priv : ./addhost.php <hostname> anp v3 <user> <password> [md5|sha] [port] [udp|udp6|tcp|tcp6] Auth, Priv : ./addhost.php <hostname> ap v3 <user> <password> <enckey> [md5|sha] [aes|dsa] [port] [udp|udp6|tcp|tcp6] Remember to run discovery for the host afterwards. i did this setup on local machine and i want to ad this local machine as host.Is it possible to add like this.? But i am getting the above error message. it's trying to get through snmp. but in my machine snmp is running. please help me to fix this issue Thanks & Regards, Ben

2 2

Re: [Observium] adduser.php giving mysql error
by Ben .T.George 15 Apr '13

15 Apr '13

HI Thanks for the replay. i solved the issue by rerunning the DB table setup script Thanks & Regards, Ben On Sun, Apr 14, 2013 at 1:34 PM, Tom Laermans <tom.laermans(a)powersource.cx>wrote: > You don't have the database tables set up. > > > On 14/04/2013 11:35, Ben .T.George wrote: > > HI > > Thanks for the reply..i changed database variables on config.php file and > the above error got solved. > > now i am getting some other error. > > # ./adduser.php ben redhat 1 > > User ben creation failed ! > > please help me to solve this issue. > > Thanks & Regards, > Ben > > > On Sun, Apr 14, 2013 at 9:55 AM, Tom Laermans < > tom.laermans(a)powersource.cx> wrote: > >> On 14/04/2013 8:52, Kamoltorn Theppunya (Tang) wrote: >> >> >> >> It’s caused of special character in your mysql’s password. >> >> >> >> There have 2 solutions that I have solved. >> >> >> >> 1. Change you mysql password not to use character like &%*)% >> >> 2. If you don’t want to change password try to use single quote in >> password term like this >> >> >> >> ./adduser.php user ‘yourpa$$word’ 1 >> >> >> >> >> I'm having a hard time connecting solution 1 to solution 2 to the actual >> cause. >> >> - Using a different password for your Observium user makes no difference >> for the MySQL connection. >> - Special characters in your MySQL password should be no problem. >> >> The real reason: >> >> // Database config >> $config['db_host'] = "localhost"; >> $config['db_user'] = "USERNAME"; >> $config['db_pass'] = "PASSWORD"; >> $config['db_name'] = "observium"; >> >> You did not configure the database credentials correctly. (and will not >> have a database import through the sql schema updater, as it could not have >> connected to MySQL as well) >> >> Tom >> >> >> >> Best Regards. >> >> >> >> >> >> >> >> *From:* observium-bounces(a)observium.org [ >> mailto:observium-bounces@observium.org <observium-bounces(a)observium.org>] >> *On Behalf Of *Ben .T.George >> *Sent:* Sunday, April 14, 2013 1:35 PM >> *To:* observium(a)observium.org >> *Subject:* [Observium] adduser.php giving mysql error >> >> >> >> HI Mailing List >> >> >> >> i followed http://www.observium.org/wiki/RHEL_SVN_Installation this >> tutorial. >> >> when i run ./adduser.php <username> <password> 1 >> >> i am getting mysql error like below >> >> <h2> observer MySQL Error</h2> Access denied for user 'USERNAME'@'localhosr >> ' (using password: YES) >> >> for me the below mysql table creation and access giving was >> successful. I used below command >> >> mysql -u root -p >> >> <mysql root password> >> >> mysql> CREATE DATABASE observium; >> >> mysql> GRANT ALL PRIVILEGES ON observium.* TO 'observium'@'localhost' >> >> -> IDENTIFIED BY '<observium db password>'; >> >> >> >> Thanks & Regards, >> Ben >> >> >> _______________________________________________ >> observium mailing listobservium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> > > _______________________________________________ > observium mailing listobservium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > >

1 0

Re: [Observium] adduser.php giving mysql error
by Adam Armstrong 14 Apr '13

14 Apr '13

localhosr ? "Ben .T.George" <bentech4you(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] adduser.php giving mysql error
by Ben .T.George 14 Apr '13

14 Apr '13

HI Thanks for the reply..i changed database variables on config.php file and the above error got solved. now i am getting some other error. # ./adduser.php ben redhat 1 User ben creation failed ! please help me to solve this issue. Thanks & Regards, Ben On Sun, Apr 14, 2013 at 9:55 AM, Tom Laermans <tom.laermans(a)powersource.cx>wrote: > On 14/04/2013 8:52, Kamoltorn Theppunya (Tang) wrote: > > ** ** > > It’s caused of special character in your mysql’s password.**** > > ** ** > > There have 2 solutions that I have solved. **** > > ** ** > > 1. Change you mysql password not to use character like &%*)% **** > > 2. If you don’t want to change password try to use single quote in > password term like this **** > > ** ** > > ./adduser.php user ‘yourpa$$word’ 1**** > > ** ** > > > I'm having a hard time connecting solution 1 to solution 2 to the actual > cause. > > - Using a different password for your Observium user makes no difference > for the MySQL connection. > - Special characters in your MySQL password should be no problem. > > The real reason: > > // Database config > $config['db_host'] = "localhost"; > $config['db_user'] = "USERNAME"; > $config['db_pass'] = "PASSWORD"; > $config['db_name'] = "observium"; > > You did not configure the database credentials correctly. (and will not > have a database import through the sql schema updater, as it could not have > connected to MySQL as well) > > Tom > > ** ** > > Best Regards.**** > > ** ** > > ** ** > > ** ** > > *From:* observium-bounces(a)observium.org [ > mailto:observium-bounces@observium.org <observium-bounces(a)observium.org>] > *On Behalf Of *Ben .T.George > *Sent:* Sunday, April 14, 2013 1:35 PM > *To:* observium(a)observium.org > *Subject:* [Observium] adduser.php giving mysql error**** > > ** ** > > HI Mailing List > **** > > ** ** > > i followed http://www.observium.org/wiki/RHEL_SVN_Installation this > tutorial.**** > > when i run ./adduser.php <username> <password> 1 **** > > i am getting mysql error like below**** > > <h2> observer MySQL Error</h2> Access denied for user 'USERNAME'@'localhosr > ' (using password: YES) > > **** > > for me the below mysql table creation and access giving was successful. I > used below command**** > > mysql -u root -p**** > > <mysql root password>**** > > mysql> CREATE DATABASE observium;**** > > mysql> GRANT ALL PRIVILEGES ON observium.* TO 'observium'@'localhost'**** > > -> IDENTIFIED BY '<observium db password>';**** > > ** ** > > Thanks & Regards, > Ben**** > > > _______________________________________________ > observium mailing listobservium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >

2 1

Access denied to fabric graphs
by Robert Williams 14 Apr '13

14 Apr '13

Hi, Got an odd one here, suddenly we are getting access denied to all 6500/7600 fabric graphs on all devices: [cid:image001.png@01CE3697.EBD353E0] When you click on the * graph you get: [cid:image002.png@01CE3697.EBD353E0] From the URL: http://<servername>/graphs/to=1365669262/device=43/mod=1/chan=0/type=c6kxbar_util/from=1365582862/<http://%3cservername%3e/graphs/to=1365669262/device=43/mod=1/chan=0/type=c6kxbar_util/from=1365582862/> We auto SVN update, so I can’t be certain exactly when this broke, but I’m pretty sure it was ok a few days ago. I’m logged in as “admin” and have never changed (or even really looked at) the permissions page, but here is a screenshot in case I’ve failed to add something I’m meant to: [cid:image003.png@01CE3698.81307AD0] Any assistance much appreciated :) Cheers! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

1 2

adduser.php giving mysql error
by Ben .T.George 14 Apr '13

14 Apr '13

HI Mailing List i followed http://www.observium.org/wiki/RHEL_SVN_Installation this tutorial. when i run ./adduser.php <username> <password> 1 i am getting mysql error like below <h2> observer MySQL Error</h2> Access denied for user 'USERNAME'@'localhosr ' (using password: YES) for me the below mysql table creation and access giving was successful. I used below command mysql -u root -p <mysql root password> mysql> CREATE DATABASE observium; mysql> GRANT ALL PRIVILEGES ON observium.* TO 'observium'@'localhost' -> IDENTIFIED BY '<observium db password>'; Thanks & Regards, Ben <observium(a)observium.org>

3 3

Alert email nightmare!
by List User 14 Apr '13

14 Apr '13

After a recent update, I have this one device which sends me these alerts, multiple times. I've got around 250x of these over the last 2 days. Observium :: Network Observation and Monitoring Device Rebooted : bravo.redspeedservers.com 4 days, 6h 11m 40s ago. ------------------- Observium :: Network Observation and Monitoring Device:bravo.redspeedservers.com Interface: eth0 Is this a bug or something?

2 1

Re: [Observium] mac-accounting rolls over at ~100Mbit/s
by Adam Armstrong 11 Apr '13

11 Apr '13

Didnt I already fix this? Mattias Gyllenvarg <Mattias.Gyllenvarg(a)Bredband2.se> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

mac-accounting rolls over at ~100Mbit/s
by Mattias Gyllenvarg 11 Apr '13

11 Apr '13

Dear Adam I was looking at the mac-accounting feature and noticed that it never goes over ~114Mbit/s. Seem to remember that the same thing happend in cacti when using 32bit values. Device is Cisco ASR9010 RSP2. PS. Sweet project, much appreciated. -- *Med Vänliga Hälsningar - Best Regards* *Mattias Gyllenvarg* *Nätutveckling* Bredband2 Tel: +46 406219712

2 2

Re: [Observium] Cisco memory pools not being recorded
by Adam Armstrong 11 Apr '13

11 Apr '13

Already fixed, pay attention! :) Matt Hucker <matt(a)nrsolutions.com.au> wrote: >Is it broken for good, or are there plans to fix it in future? > >Matt. > >On 10/04/2013, at 4:19 PM, Nikolay Shopik wrote: > >> its recent changes broke it when new memory pool added for unix host on summary page >> >> On 10.04.2013, at 9:18, Matt Hucker <matt(a)nrsolutions.com.au> wrote: > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Re: [Observium] Mac Address Switch Ports
by Adam Armstrong 11 Apr '13

11 Apr '13

What do you think they should report? Do you know that each port actually has a different Mac? Stefan Milo <stefan(a)zendata.dk> wrote: >they're powerconnects, not force10.... big difference. :) > >i have multiple observium installations with force10 s25n, powerconnect 6224 and lots of different cisco switches. > >on the force10 and powerconnects i see the same as you, with the same mac address on all interfaces. on my cisco devices theres different mac's on the ports. > >so it's either a bug in FTOS and Powerconnect, or it's something deep within observium. > >br > >stefan milo >________________________________________ >Fra: observium-bounces(a)observium.org [observium-bounces(a)observium.org] På vegne af Alex Vitola [alex.vitola(a)gmail.com] >Sendt: 9. april 2013 18:57 >Til: L - Observium >Emne: [Observium] Mac Address Switch Ports > >The same mac address for all port in all devices(dell 6248, force10). It's correct? > > >mysql> use observium; >Database changed >mysql> select device_id,ifDescr,ifPhysAddress from ports where device_id=5 limit 10; >+-----------+------------------------------------------+---------------+ >| device_id | ifDescr | ifPhysAddress | >+-----------+------------------------------------------+---------------+ >| 5 | Unit: 1 Slot: 0 Port: 1 Gigabit - Level | 5c260adb03da | >| 5 | Unit: 1 Slot: 0 Port: 2 Gigabit - Level | 5c260adb03da | >| 5 | Unit: 1 Slot: 0 Port: 3 Gigabit - Level | 5c260adb03da | >| 5 | Unit: 1 Slot: 0 Port: 4 Gigabit - Level | 5c260adb03da | >| 5 | Unit: 1 Slot: 0 Port: 5 Gigabit - Level | 5c260adb03da | >| 5 | Unit: 1 Slot: 0 Port: 6 Gigabit - Level | 5c260adb03da | >| 5 | Unit: 1 Slot: 0 Port: 7 Gigabit - Level | 5c260adb03da | >| 5 | Unit: 1 Slot: 0 Port: 8 Gigabit - Level | 5c260adb03da | >| 5 | Unit: 1 Slot: 0 Port: 9 Gigabit - Level | 5c260adb03da | >| 5 | Unit: 1 Slot: 0 Port: 10 Gigabit - Level | 5c260adb03da | >+-----------+------------------------------------------+---------------+ >10 rows in set (0.00 sec) > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

5 10

Mac Address Switch Ports
by Alex Vitola 09 Apr '13

09 Apr '13

3 2

Re: [Observium] Mac Address Switch Ports
by Adam Armstrong 09 Apr '13

09 Apr '13

This is common on some switch types. :) Tom Laermans <tom.laermans(a)powersource.cx> wrote: >Hi Alex, > >Looks like my Dell 6248s are reporting the same. All other devices have >different ones, it may be a bug in the dell firmware but not in >Observium :) > >Tom > >On Tue, 2013-04-09 at 13:57 -0300, Alex Vitola wrote: >> The same mac address for all port in all devices(dell 6248, force10). >> It's correct? >> >> >> >> >> mysql> use observium; >> Database changed >> mysql> select device_id,ifDescr,ifPhysAddress from ports where >> device_id=5 limit 10; >> +-----------+------------------------------------------+---------------+ >> | device_id | ifDescr | ifPhysAddress >> | >> +-----------+------------------------------------------+---------------+ >> | 5 | Unit: 1 Slot: 0 Port: 1 Gigabit - Level | 5c260adb03da >> | >> | 5 | Unit: 1 Slot: 0 Port: 2 Gigabit - Level | 5c260adb03da >> | >> | 5 | Unit: 1 Slot: 0 Port: 3 Gigabit - Level | 5c260adb03da >> | >> | 5 | Unit: 1 Slot: 0 Port: 4 Gigabit - Level | 5c260adb03da >> | >> | 5 | Unit: 1 Slot: 0 Port: 5 Gigabit - Level | 5c260adb03da >> | >> | 5 | Unit: 1 Slot: 0 Port: 6 Gigabit - Level | 5c260adb03da >> | >> | 5 | Unit: 1 Slot: 0 Port: 7 Gigabit - Level | 5c260adb03da >> | >> | 5 | Unit: 1 Slot: 0 Port: 8 Gigabit - Level | 5c260adb03da >> | >> | 5 | Unit: 1 Slot: 0 Port: 9 Gigabit - Level | 5c260adb03da >> | >> | 5 | Unit: 1 Slot: 0 Port: 10 Gigabit - Level | 5c260adb03da >> | >> +-----------+------------------------------------------+---------------+ >> 10 rows in set (0.00 sec) >> >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] bug at html/includes/graphs/generic_multi_line.inc.php
by Adam Armstrong 08 Apr '13

08 Apr '13

When I remember... :D Ciro Iriarte <cyruspy(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

bug at html/includes/graphs/generic_multi_line.inc.php
by andres fariña 08 Apr '13

08 Apr '13

Hi all, I´ve found a bug at html/includes/graphs/generic_multi_line.inc.php with wrong order of data shown as Avg, Min, Max at graph. Here is the fix --- /opt/observium-wks/html/includes/graphs/generic_multi_line.inc.php 2013-03-12 15:44:22.000000000 -0300 +++ html/includes/graphs/generic_multi_line.inc.php 2013-04-03 18:03:27.000000000 -0400 @@ -71,9 +71,9 @@ foreach ($rrd_list as $i => $rrd) } if(in_array("lst", $data_show)) { $rrd_optionsb .= " GPRINT:".$id.":LAST:%6.1lf%s"; } + if(in_array("avg", $data_show)) { $rrd_optionsb .= " GPRINT:".$id.":AVERAGE:%6.1lf%s"; } if(in_array("min", $data_show)) { $rrd_optionsb .= " GPRINT:".$id."min:MIN:%6.1lf%s"; } if(in_array("max", $data_show)) { $rrd_optionsb .= " GPRINT:".$id."max:MAX:%6.1lf%s"; } - if(in_array("avg", $data_show)) { $rrd_optionsb .= " GPRINT:".$id.":AVERAGE:%6.1lf%s"; } $rrd_optionsb .= " COMMENT:'\\l'"; $iter++; And the result: Before After Could someone help commiting this? Regards, Edgar

1 0

Pagination issue
by Michael Robbert 08 Apr '13

08 Apr '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I just noticed in our instance of Observium if we load the "Ports -> All ports" page it has a pagination selector at the top, but it appears to be showing all ports on one page rather than the 100 that appears to be the default. This was producing 500 errors until I increased the PHP memory to 1024M. Now it is grinding the browser to a crawl. Should this or could this page load only the first 100 entries by default? We have a similar problem with the inventory page, but it doesn't appear to have pagination enabled. I'd like to request that has an enhancement unless it is supposed to already be there and my instance is just messed up. Thanks, Mike Robbert -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.19 (Darwin) Comment: GPGTools - http://gpgtools.org iQEcBAEBAgAGBQJRXwjlAAoJEFmgPOBxQDtBGcIH+gMhDl6bNdpGytWFwv6jdgYW ZCACXyi3ikvSyY+JM/FtvO94SVeP1htUWdl9bUqQfI8tdKJL9AgkK9KGHmF08KZe Elb4W8TrSxWaodtG0gDO+rFFf+lPRYWsli4AT+rmEhoJ3mpxRDVBEiA/Z/5+h1qd fVPo3Q+yRHBC9HOE3OLC3wcbsIJywxGyS8uEFPW4nPC/Cbt/em1fEVppMi6wsGZZ Sl2S+CZr2Tgf9+L/LmOaAsRDqrvfyqsFiTu22JMj9KRffPNF+y+32C3R27+xTlua hGkJ7I7ArEw1a5GgUwQWC68jqaKcTQXJAtO5EhY8qaL/MCtDQgrrww1SCHefqTs= =oI/I -----END PGP SIGNATURE-----

2 2

Re: [Observium] Graphs don't show
by Adam Armstrong 08 Apr '13

08 Apr '13

Screenshots? Bart Teunis <bteunis(a)a2b-internet.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0