- observium - lists.observium.org

No VLANs tab / Cisco 2960S / 0.12.4.3087
by Adam Armstrong 27 Apr '12

27 Apr '12

Aha. This is because we check for 1,2 and two, three for vtp version. This will be fixed later today, i'm just rewriting the discovery module to be more sane. adam. On 2012-04-27 07:15, Damien BASTIE wrote: > One result : > > SNMPv2-SMI::enterprises.9.9.46.1.1.1.0 = INTEGER: 3 > > ________________________________________ > De : Adam Armstrong [adama(a)memetic.org] > Date d'envoi : vendredi 27 avril 2012 00:25 > À : Damien BASTIE > Objet : Re: RE : [Observium] No VLANs tab / Cisco 2960S / 0.12.4.3087 > > and : > > > > .1.3.6.1.4.1.9.9.46.1.1.1.0 > > > > adam. >

1 0

No VLANs tab / Cisco 2960S / 0.12.4.3087
by Damien BASTIE 27 Apr '12

27 Apr '12

Hi, I am testing Observium for the first time I have no VLANs tab for a stack Cisco 2960S, it is normal ? Cisco 2960 S / cat29xxStack / C2960S-UNIVERSALK9-M / Cisco IOS 12.2(55)SE2 (UNIVERSALK9) If i can send any debug no problem ! Regards, Damien

5 10

data missing on BGP IPv4 prefixes graphs
by Dario Calamai 23 Apr '12

23 Apr '12

Hello! there are an "Error Drawing Graph" on BGP IPv4 Prefixes page graphs. (/routing/protocol=bgp/type=all/graph=prefixes_ipv4unicast/view=graphs/) I don't know if this error appears in last update... little question about mail notification: do you have disabled the notification of DOWN of a BGP Peer? it works when peering is going UP or FLAP only! many thanks! dario -- http://www.playnet.it phone +39 055 3226622 - fax +39 055 3226444 Brain Technology s.p.a. - AS 13284 http://www.linkedin.com/in/dariocalamai

2 2

problem with Sentry3-MIB, 3 phase CDU's
by Darrell Budic 21 Apr '12

21 Apr '12

Hi, Running Observium 0.11.12.2749 on SL5 for this issue. Updated to 3069 and still has the same issues. But anyway: Noticed my Sentry CDU's were not picking up current or voltage information, tracked it down to a issue with the MIB. Not sure if it's the MIB in general or my version of the snmp utilities, but the discovery module complains it can't find the MIB when run in debug mode. Turns out my snmpget doesn't like the whitespace before the "Sentry3-MIB DEFINITIONS ::= BEGIN" line. I removed the whitespace and discovered the sensors. Then I noticed I had 3 phase CDU's, and the discovery code for the Sentrys only deals with 1 phase units. Here's the diffs of my hack to enable detection of all 3 phases. I think this will work on single phase units as well, although it will probably take a little longer as it scans for the nonexistent phases. I have no single phase units to test it on, however, so YMMV. 16c16,20 < $infeed_oids = snmp_walk($device, "infeedID.$towers.1", "-Osqn", "Sentry3-MIB"); --- > # These PDUs may have > 1 infeed for 3 phase systems > $phase=1; > while ($phase <= 3) { > > $infeed_oids = snmp_walk($device, "infeedID.$towers.$phase", "-Osqn", "Sentry3-MIB"); 31c35 < $infeed_oid = "1.3.6.1.4.1.1718.3.2.2.1.7." . $towers . ".1"; --- > $infeed_oid = "1.3.6.1.4.1.1718.3.2.2.1.7." . $towers . "." . $phase; 33c37 < $descr_string = snmp_get($device,"infeedID.$towers.$infeed_index", "-Ovq", "Sentry3-MIB"); --- > $descr_string = snmp_get($device,"infeedID.$towers.$phase", "-Ovq", "Sentry3-MIB"); 37,38c41,42 < $high_warn_limit = snmp_get($device,"infeedLoadHighThresh.$towers.$infeed_index", "-Ovq", "Sentry3-MIB"); < $high_limit = snmp_get($device,"infeedCapacity.$towers.$infeed_index", "-Ovq", "Sentry3-MIB"); --- > $high_warn_limit = snmp_get($device,"infeedLoadHighThresh.$towers.$phase", "-Ovq", "Sentry3-MIB"); > $high_limit = snmp_get($device,"infeedCapacity.$towers.$phase", "-Ovq", "Sentry3-MIB"); 42c46 < discover_sensor($valid['sensor'], 'current', $device, $infeed_oid, $towers, 'sentry3', $descr, $divisor, $multiplier, $low_limit, $low_warn_limit, $high_warn_limit, $high_limit, $current); --- > discover_sensor($valid['sensor'], 'current', $device, $infeed_oid, "$towers.$phase" , 'sentry3', $descr, $divisor, $multiplier, $low_limit, $low_warn_limit, $high_warn_limit, $high_limit, $current); 48c52 < $outlet_oids = snmp_walk($device, "outletLoadValue.$towers.1", "-Osqn", "Sentry3-MIB"); --- > $outlet_oids = snmp_walk($device, "outletLoadValue.$towers.$phase", "-Osqn", "Sentry3-MIB"); 61c65 < $outletsuffix = "$towers.$infeed_index.$outlet_index"; --- > $outletsuffix = "$towers.$phase.$outlet_index"; 103a108,109 > $phase++; > } //if($phase) Hope it helps someone :) Thanks for the nice work! -Darrell

1 0

Data collection stopped
by Chris Stone 20 Apr '12

20 Apr '12

Data collection stopped today - running build 3060 - was working fine with that for awhile, so not sure what happened. Running poller manually I get the error: dot3StatsDuplexStatus/usr/bin/snmpbulkwalk -v2c -c public -OQUs -m EtherLike-MIB -M /opt/observium/mibs udp:axis-core-01.axint.net:161 dot3StatsDuplexStatus dot3StatsDuplexStatus = No Such Object available on this agent at this OID SQL[SELECT COUNT(*) FROM `ports` WHERE `device_id` = '1' AND `ifType` = 'adsl'] /usr/bin/snmpbulkwalk -v2c -c public -OQUs -m Q-BRIDGE-MIB -M /opt/observium/mibs udp:axis-core-01.axint.net:161 dot1qPortVlanTable dot1qPortVlanTable = No Such Object available on this agent at this OID /usr/bin/snmpbulkwalk -O QUs -v2c -c public -M /opt/observium/mibs -m Q-BRIDGE-MIB udp:axis-core-01.axint.net:161 dot1qVlanCurrentEgressPorts 2>/dev/null dot1qVlanCurrentEgressPorts = No Such Object available on this agent at this OID /usr/bin/snmpbulkwalk -v2c -c public -OQUs -m Q-BRIDGE-MIB -M /opt/observium/mibs udp:axis-core-01.axint.net:161 dot1dBasePortIfIndex dot1dBasePortIfIndex = No Such Object available on this agent at this OID SQL[SELECT * FROM `ports` WHERE `device_id` = '1'] Port lo(1) PHP Fatal error: Call to a member function get() on a non-object in /opt/observium/includes/polling/ports.inc.php on line 168 Fatal error: Call to a member function get() on a non-object in /opt/observium/includes/polling/ports.inc.php on line 168 Suggestions? Anyone else seeing this? Oh, this is PHP 5.3.10 and Observium build 3060. -- Chris Stone AxisInternet, Inc. www.axint.net

2 5

I/O wait
by Ciro Iriarte 19 Apr '12

19 Apr '12

Hi!, I noticed just today that observium doesn't graph i/o wait time from CPU usage. Only user/nice/system/idle, i/o wait is not provided by SNMP or it's just missing in Observium? Regards, -- Ciro Iriarte http://cyruspy.wordpress.com --

6 17

Remove ports from Web Overview
by Philip Möller 16 Apr '12

16 Apr '12

Hi, I have a performance issue with the Observium Web Interface. The Apache2 webserver needs about 4-5 minutes to load all graphs of some devices. The devices are CISCO NEXUS 5548 switches with CISCO NEXUS 2248 FEX (Fabric Extenders). One 5548 switch will have about 7488 Interfaces when fully populated (48 local interfaces + 48 local virtual interfaces + 24 * 52 + 52 interfaces for the extenders). I do not need to monitor or graph all the edge / access layer ports but only the backbone ports ( 144 ports ). As far as I understand the documentation all ports flagged as disabled are not polled any more and all ports that are deleted are not shown by the Apache2. Unfortunately the poller.php run updates disabled = 0 for all ports found on the device and they are back in the web interface overview. I cannot find the statement in the poller.php debug output but all Ports with deleted = 1 set manually are updated to deleted = 0 after a poller.php run. My question is if there is any way to delete available ports I do not want to have in the web overview or to drain those ports from the web interface. With bet regards, --- Philip Möller Senior Linux Systemadministrator International IT Operations Bigpoint GmbH Drehbahn 47-48 20354 Hamburg | Germany Tel: +49(0)40.88 1413-356 Cell: +49(0)151 27471095 E-Mail: p.moeller(a)bigpoint.net<mailto:p.moeller@bigpoint.net> --- CEO: Heiko Hubertz Business Registration: HRB-Hamburg 94148

3 8

Re: [Observium] Date Picker broken
by Timo Ament 12 Apr '12

12 Apr '12

Hi Folks, same issue as Bruce - setting the Date Picker reverts you back to the start-page. Normally, when opening a graph the url is something like: http://observium/graphs/type=customer_bits/to=1334238800/id=server/from=133… Now when changing the time-range and klicking "update" the URL is beeing transformed into: http://observium/index.php/graphs/type=customer_bits/to=1334238800/id=serve… When i remove the index.php from the url i am getting the desired result. Currently running 3026 Regards Timo Am 12.04.2012 13:00, schrieb observium-request(a)observium.org: > Re: Date Picker broken

4 3

Date Picker broken
by Bruce-Young Majola 12 Apr '12

12 Apr '12

Hi, Please have a look at the date picker for graphs, it looks to be broken and the latest version of Observium. It takes you back to the "Home" page whenever you click the Update button. Is anyone having the same issue? Regards, Bruce DISCLAIMER: The information in this message is confidential and may be legally privileged. It is intended solely for the addressee. Access to this message by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, or distribution of the message, or any action or omission taken by you in reliance on it, is prohibited and may be unlawful. Please immediately contact the sender if you have received this message in error. SWIFTNET and any of its subsidiaries each reserve the right to monitor all e-mail communications through its networks. Thank you.

4 3

Device Graphs page blank
by Chris Stone 11 Apr '12

11 Apr '12

Not sure when this started, but I've got a couple of Linux servers where suddenly the Graphs tab on them blank. The page layout is all there, but the part under the heading Graphs where the graphs and netstats links and graphs should be is empty. Checked the apache logs and see nothing there indicating any problem and poller.php runs fine - one of them: Observium Poller v0.12.4.3008 Starting polling run: pegasus.domain.com 65 linux (unix) Using hrSystemUptime (384:13:39:50.94) Uptime: 1 years, 19 days, 13h 39m 50s Hardware: Generic x86 64-bit Version: 2.6.18-164.6.1.el5 Features: CentOS 5.7 Processor Intel Xeon 2.80GHz... 10% Processor Intel Xeon 2.80GHz... 9% Processor Intel Xeon 2.80GHz... 11% Processor Intel Xeon 2.80GHz... 11% Mempool Physical memory: 88.23% Mempool Virtual memory: 43.62% Mempool Swap space: 0.52% Storage /: 19% Storage /boot: 35% Polling Netstats: IP TCP UDP ICMP SNMP HR Stats: Processes Users Polling IP-MIB ipSystemStats ipv4 ipv6 Caching Oids: ifEntry ifXEntry dot3StatsDuplexStatus Port lo(1) HC HC VLAN == bps(37.4kbps/37.4kbps)bytes(434kB/434kB)pkts(38.9pps/38.9pps) Port eth0(2) HC HC dot3Duplex VLAN == bps(340kbps/336kbps)bytes(3.86MB/3.81MB)pkts(153pps/149pps) Port eth1(3) HC dot3Duplex VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Port sit0(4) HC VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Module [ bgp-peers ] disabled on host. Module [ junose-atm-vp ] disabled on host. Module [ toner ] disabled on host. Checking UCD DiskIO MIB: sda sda1 sda2 sda3 Applications: apache mailscanner Module [ wifi ] disabled on host. Module [ ospf ] disabled on host. Module [ cisco-ipsec-flow-monitor ] disabled on host. Module [ cisco-remote-access-monitor ] disabled on host. Module [ cisco-cef ] disabled on host. Module [ cisco-mac-accounting ] disabled on host. Module [ cipsec-tunnels ] disabled on host. Module [ cisco-ace-loadbalancer ] disabled on host. Module [ cisco-ace-serverfarms ] disabled on host. Module [ netscaler-vsvr ] disabled on host. Entity Physical: Module [ unix-agent ] disabled globally. Polled in 1.292 seconds UPDATED! MySQL: Cell[0/0s] Row[3/0s] Rows[11/0s] Column[0/0s] Update[14/0.01s] Insert[1/0s] Delete[0/0s] Ran poller also in debug mode and saw no errors - everything appeared normal. Just see this on a couple of CentOS 5.x and CentOS 6.x servers - have many others (same OSs) that are fine.... Ideas? Chris -- Chris Stone AxisInternet, Inc. www.axint.net

3 6

IPSLA snmp monitoring
by Bruce-Young Majola 10 Apr '12

10 Apr '12

Hi, I have upgraded to the latest version of Observium to try out IPSLA monitoring features; I have specifically configured IPSLA for ICMP Echo operation. The graph legends are there however nothing is being graphed in Observium. Regards Bruce DISCLAIMER: The information in this message is confidential and may be legally privileged. It is intended solely for the addressee. Access to this message by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, or distribution of the message, or any action or omission taken by you in reliance on it, is prohibited and may be unlawful. Please immediately contact the sender if you have received this message in error. SWIFTNET and any of its subsidiaries each reserve the right to monitor all e-mail communications through its networks. Thank you.

1 0

doc bug at http://www.observium.org/wiki/Services
by Andrew Beals 09 Apr '12

09 Apr '12

Someone needs to s/Paramaters/Parameters/ On the wiki page @ http://www.observium.org/wiki/Services -- Andrew Beals c: 913-787-7538 ABeals(a)mersoft.com

1 0

Can not see device pages
by Zafar Pravaiz 09 Apr '12

09 Apr '12

Hi After updating to latest release i am not able to see the device in brower. When every i click on any device from default page i get noting. Here is the debug from apache log. Any body have any idea? Thanks [Sun Apr 08 09:58:51 2012] [error] an unknown filter was not added: INCLUDES [Sun Apr 08 09:58:51 2012] [error] an unknown filter was not added: INCLUDES [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: fetchrow_sec in /opt/observium/includes/dbFacile.php on line 213 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: fetchrow in /opt/observium/includes/dbFacile.php on line 214 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: fetchrows_sec in /opt/observium/includes/dbFacile.php on line 174 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: fetchrows in /opt/observium/includes/dbFacile.php on line 175 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined offset: 1 in /opt/observium/html/index.php on line 80 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Use of undefined constant yes - assumed 'yes' in /opt/observium/html/index.php on line 83 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined offset: 1 in /opt/observium/html/index.php on line 80 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Use of undefined constant yes - assumed 'yes' in /opt/observium/html/index.php on line 83 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: widescreen in /opt/observium/html/index.php on line 144 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: bare in /opt/observium/html/index.php on line 238 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: widescreen in /opt/observium/html/includes/header.inc.php on line 18 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: devices in /opt/observium/html/includes/topnav.inc.php on line 13 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: count in /opt/observium/html/includes/topnav.inc.php on line 13 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: device_types in /opt/observium/html/includes/topnav.inc.php on line 18 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: in /opt/observium/html/includes/topnav.inc.php on line 18 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: network in /opt/observium/html/includes/topnav.inc.php on line 18 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: loadbalancer in /opt/observium/html/includes/topnav.inc.php on line 18 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: server in /opt/observium/html/includes/topnav.inc.php on line 18 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: firewall in /opt/observium/html/includes/topnav.inc.php on line 18 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: wireless in /opt/observium/html/includes/topnav.inc.php on line 18 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Use of undefined constant bgcolour - assumed 'bgcolour' in /opt/observium/html/includes/topnav.inc.php on line 67 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: locations in /opt/observium/html/includes/functions.inc.php on line 452 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Warning: in_array() expects parameter 2 to be array, null given in /opt/observium/html/includes/functions.inc.php on line 452 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: ignore_dev_location in /opt/observium/html/includes/functions.inc.php on line 450 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: admindown in /opt/observium/html/includes/print-menubar.php on line 288 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: deleted in /opt/observium/html/includes/print-menubar.php on line 290 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: humidity in /opt/observium/html/includes/print-menubar.php on line 347 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: frequency in /opt/observium/html/includes/print-menubar.php on line 362 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: power in /opt/observium/html/includes/print-menubar.php on line 362 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: fetchcell_sec in /opt/observium/includes/dbFacile.php on line 236 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: fetchcell in /opt/observium/includes/dbFacile.php on line 237 NET-SNMP version: 5.4.2.1 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: devel in /opt/observium/html/index.php on line 254 [Sun Apr 08 09:58:51 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: devel in /opt/observium/html/index.php on line 254 [Sun Apr 08 09:58:52 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: fetchcol in /opt/observium/html/index.php on line 301 [Sun Apr 08 09:58:52 2012] [error] [client 192.168.128.52] PHP Notice: Undefined index: fetchcol_sec in /opt/observium/html/index.php on line 301 [Sun Apr 08 09:58:52 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: neg in /opt/observium/includes/common.php on line 498 [Sun Apr 08 09:58:52 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: neg in /opt/observium/includes/common.php on line 498 [Sun Apr 08 09:58:52 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: neg in /opt/observium/includes/common.php on line 498 [Sun Apr 08 09:58:52 2012] [error] [client 192.168.128.52] PHP Notice: Undefined variable: pagetitle in /opt/observium/html/index.php on line 328 [Sun Apr 08 09:58:52 2012] [debug] mod_deflate.c(615): [client 192.168.128.52] Zlib: Compressed 4145488 to 81959 : URL /observium/index.php/device/device=2/debug/ -- *Zafar Pravaiz *

3 6

some patches.
by Rob J. Epping 07 Apr '12

07 Apr '12

Hi, Here are some patches I made to my Observium install. <http://puther.home.xs4all.nl/observium-rebooted-fix.diff> Only show rebooted systems on front page when uptime > 0 For SNMP-agents that do not report uptime (EMC VNX5300 for one) <http://puther.home.xs4all.nl/observium-axis.diff> Also detects Axis video servers. <http://puther.home.xs4all.nl/observium-dell-unix-sn.diff> Detect Dell servicetag as serialnumber through dell MIB on "unix" systems, <http://puther.home.xs4all.nl/observium-dell-windows.diff> Detect Dell systems and servivcetag the same way as on "unix" <http://puther.home.xs4all.nl/observium-esx-linux.diff> Access VMware mibs through net-snmp using config from <http://www.vmware.com/pdf/vsp_4_snmp_config.pdf> <http://puther.home.xs4all.nl/observium-procurve-sn.diff> Get serial-number for HP switches. <http://puther.home.xs4all.nl/observium-rename-host.diff> Improvements to command-line rename-host Can these be include in Observium? THNX! BTW: can you also include Paul Gear's <paul(a)libertysys.com.au> patch for non-FQDN rancid? <http://libertysys.com.au/patches/observium/observium-r2339-rancid-non-fqdn.…> And the fortigate patches from Matthias Cramer which <matthias.cramer(a)iway.ch> i've made available for download on <http://puther.home.xs4all.nl/observium-fortigate.diff> and <http://puther.home.xs4all.nl/observium-fgt-proc.diff> Both were send to the mailinglist a while ago. -- GRTNX, RobJE

1 0

PIX 501 support
by Chris Stone 06 Apr '12

06 Apr '12

I have a couple of Cisco PIX 501's setup in Observium, but they are being seen only as Generic Devices: Cisco PIX Firewall Version 6.3(5) Operating System Generic Device Contact support(a)axint.net Location Denver, CO Uptime 291 days, 22h 45m 55s And the only graphs I am getting are Uptime and the ethernet port counters (traffic, packets, etc). Nothing for memory or cpu. Both firewalls are the same - here's the info on one of them: voip-fw# show ver Cisco PIX Firewall Version 6.3(5) Cisco PIX Device Manager Version 3.0(4) Compiled on Thu 04-Aug-05 21:40 by morlee voip-fw up 291 days 22 hours Hardware: PIX-501, 16 MB RAM, CPU Am5x86 133 MHz Flash E28F640J3 @ 0x3000000, 8MB BIOS Flash E28F640J3 @ 0xfffd8000, 128KB 0: ethernet0: address is 0016.c836.223a, irq 9 1: ethernet1: address is 0016.c836.223c, irq 10 Licensed Features: Failover: Disabled VPN-DES: Enabled VPN-3DES-AES: Enabled Maximum Physical Interfaces: 2 Maximum Interfaces: 2 Cut-through Proxy: Enabled Guards: Enabled URL-filtering: Enabled Inside Hosts: 10 Throughput: Unlimited IKE peers: 10 My understanding was that PIX firewalls were supported. Is what I am getting all the support there currently is? Or is there something else I need to do to enable cpu and memory counters. I had them setup in Cacti previously, so it would seem that the SNMP counters do exist. -- Chris Stone AxisInternet, Inc. www.axint.net

6 9

netstat graph broken
by Nikolay Shopik 05 Apr '12

05 Apr '12

Hey, Just noticed that netstat graphs seems broken, not all graphs are drawn, r2922 is here.

3 5

ATM interfaces not showing on Device Overview
by Bruce-Young Majola 05 Apr '12

05 Apr '12

Hi Adam, I am having a strange issues which I need your help in troubleshooting. I have this 7606 which has ATM interfaces configured but the problem is that when I discover this device, all the interfaces are discovered include ATM ones but as soon as the poller runs, they disappear again. I am not sure how to fix this issues. I am running the latest version of Observium. Thanks for your help. After discovery After poller has run Regards, Bruce Majola DISCLAIMER: The information in this message is confidential and may be legally privileged. It is intended solely for the addressee. Access to this message by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, or distribution of the message, or any action or omission taken by you in reliance on it, is prohibited and may be unlawful. Please immediately contact the sender if you have received this message in error. SWIFTNET and any of its subsidiaries each reserve the right to monitor all e-mail communications through its networks. Thank you.

5 13

Re: [Observium] [Observium-dev] r2955 - in observer/trunk: . includes includes/polling
by Paul Gear 05 Apr '12

05 Apr '12

On 05/04/12 04:10, observium-commits(a)observium.org wrote: > Author: adama > Date: 2012-04-04 19:10:45 +0100 (Wed, 04 Apr 2012) > New Revision: 2955 > ... > Log: > Add support for memcached to poller for current bps/pps for ports and ability to disable writing these values to MySQL. HIGHLY RECOMMENDED FOR LARGE INSTALLS. Also PROCEED WITH CAUTION. How many ports == "LARGE INSTALLS"?

3 4

Re: [Observium] poller doesn’t kick the apache-stats.py script
by Andrew Beals 05 Apr '12

05 Apr '12

Rather than modifying the poller script, simply commenting out the "mibs :" line at the bottom of /etc/snmp/snmp.conf on your Observium server box is sufficient to get the polling to work correctly. Ubuntu put that line in citing "licensing issues" with the MIBs.

3 4

rrd time selection is wrong
by Nikolay Shopik 04 Apr '12

04 Apr '12

It seems like when you select time to show graph it doesn't take in consideration timezone. Basically if I select from 18:00 till now and press update time in "From" field update to 22:00 (I have GMT+4 zone). You can click update multiply times and graph time will be moving after each click.

2 3

VRF Names truncated in version 0.12.4.2946
by Bruce-Young Majola 03 Apr '12

03 Apr '12

Hi, I just upgraded to the latest version of Observium and I noticed after running discovery that the VRF descriptions are now truncated, see below. Before upgrade: After upgrade Regards, Bruce Majola DISCLAIMER: The information in this message is confidential and may be legally privileged. It is intended solely for the addressee. Access to this message by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, or distribution of the message, or any action or omission taken by you in reliance on it, is prohibited and may be unlawful. Please immediately contact the sender if you have received this message in error. SWIFTNET and any of its subsidiaries each reserve the right to monitor all e-mail communications through its networks. Thank you.

1 0

SNMPv3 implementation
by Guillaume Leclanche 31 Mar '12

31 Mar '12

Hello, attached is the patch for the implementation of SNMPv3. I've been testing it on my system and devices, and it seems to be working properly. Since it's a core function of the soft, I guess it would be good that other people give it a try before it is committed. I use NET-SNMP version: 5.4.3. Be careful that a few files use direct calls to net-snmp instead of calling observium library functions. It means that those calls will not work with an snmpv3 device. includes/discovery/cisco-mac-accounting.inc.php: $datas = shell_exec($config['snmpbulkwalk'] . " -M ".$config['mibdir']." -m CISCO-IP-STAT-MIB -Oqn -".$device['snmpver']." -c ".$device['community']." ".$device['hostname']." cipMacSwitchedBytes"); includes/discovery/cisco-pw.inc.php: $oids = shell_exec($config['snmpwalk'] . " -M " . $config['mibdir'] . " -m CISCO-IETF-PW-MIB -CI -Ln -Osqn -" . $device['snmpver'] . " -c " . $device['community'] . " " . $device['hostname'].":".$device['port'] . " cpwVcID"); includes/discovery/cisco-pw.inc.php: list($cpw_remote_id) = explode(":", shell_exec($config['snmpget'] . " -M " . $config['mibdir'] . " -m CISCO-IETF-PW-MPLS-MIB -Ln -Osqnv -" . $device['snmpver'] . " -c " . $device['community'] . " " . $device['hostname'].":".$device['port'] . " cpwVcMplsPeerLdpID." . $cpwOid)); includes/discovery/cisco-pw.inc.php: $interface_descr = trim(shell_exec($config['snmpwalk'] . " -M " . $config['mibdir'] . " -m CISCO-IETF-PW-MIB -Oqvn -" . $device['snmpver'] . " -c " . $device['community'] . " " . $device['hostname'].":".$device['port'] . " cpwVcName." . $cpwOid)); includes/discovery/temperatures/adva.inc.php: $temperature_chassis = trim(shell_exec($config['snmpget'] . " -M " . $config['mibdir'] . " -O qv -$snmpver -c $community $hostname:$port $oid_chassis")); includes/discovery/temperatures/adva.inc.php: $temperature_stm16 = trim(shell_exec($config['snmpget'] . " -M " . $config['mibdir'] . " -O qv -$snmpver -c $community $hostname:$port $oid_stm16")); includes/discovery/temperatures/adva.inc.php: $temperature_hss1 = trim(shell_exec($config['snmpget'] . " -M " . $config['mibdir'] . " -O qv -$snmpver -c $community $hostname:$port $oid_hss1")); includes/discovery/temperatures/adva.inc.php: $temperature_hss2 = trim(shell_exec($config['snmpget'] . " -M " . $config['mibdir'] . " -O qv -$snmpver -c $community $hostname:$port $oid_hss2")); includes/discovery/cisco-vrf.inc.php: $vrf['name'] = trim(shell_exec($config['snmpget'] . " -M " . $config['mibdir'] . " -m MPLS-VPN-MIB -Ln -Osq -" . $device['snmpver'] . " -c " . $device['community'] . " " . $device['hostname'].":".$device['port'] . " mplsVpnVrfRouteDistinguisher.".$vrf['oid'])); includes/discovery/cisco-vrf.inc.php: $vrf['mplsVpnVrfDescription'] = trim(shell_exec($config['snmpget'] . " -M " . $config['mibdir'] . " -m MPLS-VPN-MIB -Ln -Osqvn -" . $device['snmpver'] . " -c " . $device['community'] . " " . $device['hostname'].":".$device['port'] . " mplsVpnVrfDescription.".$vrf['oid'])); includes/discovery/cisco-vrf.inc.php: $ports = shell_exec($config['snmpwalk'] . " -M " . $config['mibdir'] . " -m MPLS-VPN-MIB -CI -Ln -Osqn -" . $device['snmpver'] . " -c " . $device['community'] . " " . $device['hostname'].":".$device['port'] . " $ports_oid"); includes/polling/os/ironware.inc.php:$hardware = trim(exec($config['snmpget'] . " -M ".$config['mibdir'] . " -O vqs -m FOUNDRY-SN-AGENT-MIB:FOUNDRY-SN-ROOT-MIB -" . $device['snmpver'] . " -c " . $device['community'] . " " . includes/polling/os/ironware.inc.php:$version = trim(exec($config['snmpget'] . " -M ".$config['mibdir'] . " -O vqs -m FOUNDRY-SN-AGENT-MIB:FOUNDRY-SN-ROOT-MIB -" . $device['snmpver'] . " -c " . $device['community'] . " " . includes/polling/os/speedtouch.inc.php:$loop = shell_exec($config['snmpget'] . " -M ".$config['mibdir'] . ' -Ovq -v1 -c '.$device['community'].' '.$device['hostname'].' ifDescr.101'); I will send a patch to fix cisco-vrf after this mail, but the other files will still be incompatible with snmpv3 (keep your devices in SNMPv2 if you use any of the incompatible calls). Guillaume

1 1

Cisco-vrf discovery - huge performance improvement
by Guillaume Leclanche 31 Mar '12

31 Mar '12

Hi, As I wanted to make Cisco VRF discovery SNMPv3-compatible, I realized that it was actually very slow. So I change the philosophy of it (bulkwalk all SNMP info first then analyze in the code), and here's the result for a device with 500 VRFs: Old version : Discovered in 65.83 seconds New version : Discovered in 3.234 seconds At the same time I made it SNMPv3-compatible, and I added the support for CISCO-L3VPN-STD-MIB that is the more recent MIB and the only one supported on the latest releases of IOS/IOS-XR. I tested it with Cisco Hw and it's fine, but for the other vendors implementing the MIB, somebody else will have to test it :) Guillaume

1 0

Re: [Observium] Legend shows not-existent interfaces
by Nikolay Shopik 29 Mar '12

29 Mar '12

Adam, Thanks, you right. Forgot to purge these deleted interfaces, my bad. On 29/03/12 14:21, Adam Armstrong wrote: > The duplicate interfaces are almost certainly instances where the device > has rebooted and the interface has changed ifIndex. Check the ports > table for ports for that device_id, you'll probably find duplicated > ifDescrs with different ifIndexes, with the older copies being labelled > as deleted. > > We still draw these interfaces to keep the shape of the graph. (and > that's one of the reasons we keep deleted interfaces in the database). > > adam. > > > On 2012-03-29 11:18, Nikolay Shopik wrote: >> Hi Adam, >> >> Here is graph and debug output. >> >> On 29/03/12 13:11, Adam Armstrong wrote: >>> Do you have an example? >>> >>> run the graph URL with&debug=1 on the end. >>> >>> adam. >>> >>> >>> On 2012-03-29 09:06, Nikolay Shopik wrote: >>>> When you open Total Traffic graph, you may see in Legend interfaces >>>> which doesn't really exist on this device. >>>> Additionally sometimes you may see duplicate interfaces in Legend, >>>> which >>>> do exist. >>>> I wonder what may cause of this and to fix it? >>>> _______________________________________________ >>>> observium mailing list >>>> observium(a)observium.org >>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >

2 2

Legend shows not-existent interfaces
by Nikolay Shopik 29 Mar '12

29 Mar '12

When you open Total Traffic graph, you may see in Legend interfaces which doesn't really exist on this device. Additionally sometimes you may see duplicate interfaces in Legend, which do exist. I wonder what may cause of this and to fix it?

2 1