- observium - lists.observium.org

AS400
by Ciro Iriarte 28 Feb '12

28 Feb '12

Hi, if anyone has interest and time to add AS400 on iseries support I can provide sample data using SNMPSIM. I found the following documentation: >From IBM: http://www.redbooks.ibm.com/redbooks/pdfs/sg244504.pdf http://publib.boulder.ibm.com/infocenter/iseries/v5r4/topic/books/sc415412.… Which MIBs are used: http://lists.skills-1st.co.uk/mharc/html/nv-l/2001-01/msg00237.html MIB definitions (the 5 mentioned above are included here): http://www.mibdepot.com/cgi-bin/vendor_index.cgi?r=ibm Regards, -- Ciro Iriarte http://cyruspy.wordpress.com --

1 0

Traffic
by Nuno Dias 24 Feb '12

24 Feb '12

Hi, I'm testing the observium and already added a couple of devices, (several switch one router and some linux boxes) All this devices have at least 1Gb network cards or ports in the case of switchs, some have 10Gb ports. But in my graphs I have at most 100/120 Mb peaks, but I'm sure that I have more traffic in some ports, because I have other monitoring system (cacti) showing that. I remember that in cacti I had to configure the counters to be 64-bits and convert bytes in bits. So, do I need to configure in observium this kind of things? if yes where? or this is some kind of bug? Thanks Nuno -- Nuno Dias <ndias(a)lip.pt> LIP

1 0

Limit Views and devices groups
by Ciro Iriarte 20 Feb '12

20 Feb '12

Hi!, how do you guys scale in heterogeneous administrative environments?. For example: - Within an administrative domain would be nice to group the devices involved in a particular high level service. - Currently I have a mix of devices and would like to see them all, but some administrator for example would like to see only their hardware. Would it be possible to limit access to a set of devices?. >From what I know, the only way right now would be to have many observium instances for different people, but that would be an issue if some people would like to see all the hardware.... Regards, -- Ciro Iriarte http://cyruspy.wordpress.com --

2 2

LDAP authentication with AD
by Bao Nguyen 17 Feb '12

17 Feb '12

Does anyone know the correct parameters for binding with Active Directory for Observium? Is there a way to make it use SSL? I've used the configuration below but get a blank page after attempting to login. I have not tried dig through the logs to find out what's the issues are but if someone know of the correct parameters I would love to try it first. #$config['auth_mechanism'] = "ldap"; # default, other options: ldap, http-auth #$config['auth_ldap_version'] = 3; # v2 or v3 #$config['auth_ldap_server'] = "beernuts.ad.ucsd.edu"; #$config['auth_ldap_port'] = 636; #$config['auth_ldap_suffix'] = ",ou=SDSC,dc=UCSD,dc=EDU"; thanks, -bn 0216331C

1 1

widescreen ports graphs
by Nikolay Shopik 15 Feb '12

15 Feb '12

Hey Adam, Just quick note, that widescreen mode on ports graph doesn't working property. These 4 graphs should fill all available width, but instead using proportion from normal mode. And I wonder if there way we could able to select multiply different port types, like transit+peering. I mean come up with different control where you could select not only one state?

2 2

Re: [Observium] C6K Fabric stats not being recorded any more
by Tom Laermans 03 Feb '12

03 Feb '12

Robert, Do you know what revision you were running when it still worked? Probably something broke or disappeared or so when you updated a few weeks ago and didnt get fixed until now... Tom ----- Reply message ----- From: "Robert Williams" <Robert(a)CustodianDC.com> To: "'Observium Network Observation System'" <observium(a)observium.org> Subject: [Observium] C6K Fabric stats not being recorded any more Date: Fri, Feb 3, 2012 10:55 Hi all, I'm still not getting very far with this one :( Out of desperation I deleted and re-added one 6509 chassis and now it doesn't even show the stats for the fabric, it's just missing the whole "Catalyst 6k Crossbar" section? I'm running the latest (2854) revision. Any ideas please? Robert Williams Backline / Operations Team Custodian DataCentre tel: +44 (0)1622 230382 email: Robert(a)CustodianDC.com http://www.custodiandc.com/disclaimer.txt -----Original Message----- From: Robert Williams Sent: 01 February 2012 16:53 To: Observium Network Observation System Subject: C6K Fabric stats not being recorded any more Hi Guys, For some (unknown) reason all of our catalyst chassis (650x-E) have recently stopped recording data for their Crossbar usage on all their cards. Data is visible up to a couple of weeks ago, but then stops and nothing more has been recorded since. The permission on the rrd are fine, and the file itself hasn't been modified since the day the data stopped being recorded. Interestingly, the usage 'bar' next to the (blank) graph shows usage on it correctly. So, as a test, I moved the rrd files for one chassis out of its folder then did a full redetect of the one host in question. Since then it doesn't appear to have made any effort to re-create the RRD file :( So, any ideas on why this one element would stop working suddenly? Or alternatively, is there a way to 'force' Observium to re-create it's rrd files for specific sensors on demand? Any input most welcome :) Cheers, _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

4 4

C6K Fabric stats not being recorded any more
by Robert Williams 03 Feb '12

03 Feb '12

Hi Guys, For some (unknown) reason all of our catalyst chassis (650x-E) have recently stopped recording data for their Crossbar usage on all their cards. Data is visible up to a couple of weeks ago, but then stops and nothing more has been recorded since. The permission on the rrd are fine, and the file itself hasn't been modified since the day the data stopped being recorded. Interestingly, the usage 'bar' next to the (blank) graph shows usage on it correctly. So, as a test, I moved the rrd files for one chassis out of its folder then did a full redetect of the one host in question. Since then it doesn't appear to have made any effort to re-create the RRD file :( So, any ideas on why this one element would stop working suddenly? Or alternatively, is there a way to 'force' Observium to re-create it's rrd files for specific sensors on demand? Any input most welcome :) Cheers, Robert Williams Backline / Operations Team Custodian DataCentre tel: +44 (0)1622 230382 email: Robert(a)CustodianDC.com http://www.custodiandc.com/disclaimer.txt

1 1

no mail after down of a BGP peer
by Dario Calamai 30 Jan '12

30 Jan '12

Hello! the mail notification doesn't work after a down of a BGP peer. it works when peering is going UP or FLAP! I tried to understand where the problem was but I didn't succeed.. :( thanks! Dario -- http://www.playnet.it phone +39 055 3226622 - fax +39 055 3226444 Brain Technology s.p.a. - AS 13284 http://www.linkedin.com/in/dariocalamai

1 0

Notifications for Ports in error-state
by Timo Ament 27 Jan '12

27 Jan '12

Hello, is there a way o configure observium to send out a notification, whenever a port is erroring and shown as such under the Ports-tab? Regards Timo

2 1

Quickguide: Installation on SLES11
by Ciro Iriarte 24 Jan '12

24 Jan '12

I don't see a way to create a user on the Wiki so I'm posting it here, hope people with wiki access can add it: ## # Initial Repos ## SLES11 + SLE11-SDK + Updates ## # Pre-requisites ## # Additional repositories zypper ar -f http://download.opensuse.org/repositories/network:/utilities/SLE_11_SP1 network:utilities # Prepackaged installation zypper in apache2-mod_php5 php5-mysql php5-gd php5-snmp php5-pear net-snmp graphviz-gd graphviz subversion mysql rrdtool fping ImageMagick whois mtr nmap ipmitool # Additional modules using PEAR pear install Net_IPv6 pear install Net_IPv4 # For monitoring VMs using libvirt zypper in libvirt # Checkout of Observium from SVN cd /opt svn co http://www.observium.org/svn/observer/trunk observium ## # Data Base ## # DB+user Creation mysql> create database observium; mysql> grant all privileges on observium.* to 'observium'@'localhost' -> identified by '<pass>'; # Schema creation cd observium mysql -u observium -p observium < database-schema.sql <pass> # Update config.php to include DB connection info cp config.php{.default,} vi config.php # Schema updates for F in database-update*;do scripts/update-sql.php $F;done # RRD and graphs directory creation mkdir graphs rrd chown wwwrun: graphs/ rrd/ ## # PATHS ## # fping vi config.php -- $config['fping'] = "/usr/sbin/fping"; -- ## # Apache ## # Enable Mod Rewrite a2enmod rewrite # apache vhost configuration vi /etc/apache2/vhosts.d/observium.conf -- <VirtualHost *:80> DocumentRoot /opt/observium/html/ ServerName observium.<domain> CustomLog /opt/observium/logs/access_log combined ErrorLog /opt/observium/logs/error_log <Directory "/opt/observium/html/"> AllowOverride All Options FollowSymLinks MultiViews Order allow,deny Allow from all </Directory> </VirtualHost> -- # Log destination directory mkdir /opt/observium/logs/ chown wwwrun: /opt/observium/logs/ # Startup rcapache2 start chkconfig apache2 on ## # Users (for production, better configure LDAP) ## # Admins, level 10 /opt/observium/adduser.php user1 pass 10 ## # Devices ## # Adding new devices cd /opt/observium/ && ./addhost.php <hostname> <community> v2c # Discovery inicial + colecta de datos ./discovery.php -h all ./poller.php -h all # Enable data collection using cron vi /etc/cron.d/observium -- 33 */6 * * * root cd /opt/observium/ && ./discovery.php -h all >> /dev/null 2>&1 */5 * * * * root cd /opt/observium/ && ./discovery.php -h new >> /dev/null 2>&1 */5 * * * * root cd /opt/observium/ && ./poller.php -i 8 -n 0 >> /dev/null 2>&1 */5 * * * * root cd /opt/observium/ && ./poller.php -i 8 -n 1 >> /dev/null 2>&1 */5 * * * * root cd /opt/observium/ && ./poller.php -i 8 -n 2 >> /dev/null 2>&1 */5 * * * * root cd /opt/observium/ && ./poller.php -i 8 -n 3 >> /dev/null 2>&1 */5 * * * * root cd /opt/observium/ && ./poller.php -i 8 -n 4 >> /dev/null 2>&1 */5 * * * * root cd /opt/observium/ && ./poller.php -i 8 -n 5 >> /dev/null 2>&1 */5 * * * * root cd /opt/observium/ && ./poller.php -i 8 -n 6 >> /dev/null 2>&1 */5 * * * * root cd /opt/observium/ && ./poller.php -i 8 -n 7 >> /dev/null 2>&1 ## # Performance Tunning ## # Install XCache, build package from src.rpm (install required dependencies for compilation if needed) mkdir ~/tmp cd ~/tmp wget http://download.opensuse.org/repositories/server:/php:/extensions/SLE_11/sr… rpmbuild --rebuild php5-xcache-1.3.2-2.1.src.rpm # Install result from above command # Restart apache rcapache2 restart That's all, this should work on openSUSE also, just make sure to use repositories for the correct version of distribution. Regards, -- Ciro Iriarte http://cyruspy.wordpress.com --

3 4

Feature Request/Suggestion: Trending
by Ciro Iriarte 24 Jan '12

24 Jan '12

Hi, it would be really helpful for Capacity Planning to include Trending support, as far as I know, RRDTool already has support for it. Maybe adding trending on all graphs is not the best option, because for one graph there are many data sources, and while one can choose what one thinks would be the most obvious candidate another user might need to do the trending using other datasource... Maybe adding a separate TAB where one can choose what to graph with trending would be the most "universal" solution, or maybe a mix of both, graph the obvious by default and enable and "advanced" tab for trending on demand... Regards, -- Ciro Iriarte http://cyruspy.wordpress.com --

2 1

Collectd alongside Observium
by Ciro Iriarte 24 Jan '12

24 Jan '12

Hi, I'll try asking again splitting topics... Does collectd add new data/features not available with SNMP polling?, should I implement collectd alongside a new Observium installation?. Also, which version plays nice with Observium today?, 4.10 or 5.0? Regards, -- Ciro Iriarte http://cyruspy.wordpress.com --

2 1

Load Graph, 'm'illions?
by Ciro Iriarte 24 Jan '12

24 Jan '12

Sorry if this has been asked before, couldn't find the answer in a quick search. Graphing Linux load average on a busy machine I see integer numbers, which is expected "20" for example, but graphing an almost idle machine (load 0.22), it's graphed as 220 m. Is there something I need to adjust?, is a RRD limitation? Regards, -- Ciro Iriarte http://cyruspy.wordpress.com --

2 2

"Could not ping <host>" from Web UI
by Ciro Iriarte 24 Jan '12

24 Jan '12

Hi, I managed to install Observium rev2831 on SLES11SP1, and it's working great!! Trying to add hosts by CLI I was getting the "cannot ping" message, fixed it adding "$config['fping'] = "/usr/sbin/fping";" to config.php. Now, I keep getting the same trying to use the Web UI to add a hosts, apparently it's not using the config['fping'] variable. Is that possible? Regards, -- Ciro Iriarte http://cyruspy.wordpress.com --

2 4

rev 2846 -> all int macaddrs=00:00:00:00:00:00
by Dario Calamai 24 Jan '12

24 Jan '12

thi is the diff with -6 rev: Index: includes/polling/ports.inc.php =================================================================== --- includes/polling/ports.inc.php (revisione 2840) +++ includes/polling/ports.inc.php (copia locale) @@ -182,14 +177,7 @@ if (strpos($this_port['ifPhysAddress'], ":")) { list($a_a, $a_b, $a_c, $a_d, $a_e, $a_f) = explode(":", $this_port['ifPhysAddress']); - $ah_a = zeropad($a_a); - $ah_b = zeropad($a_b); - $ah_c = zeropad($a_c); - $ah_d = zeropad($a_d); - $ah_e = zeropad($a_e); - $ah_f = zeropad($a_f); - #$this_port['ifPhysAddress'] = $ah_a.":".$ah_b.":".$ah_c.":".$ah_d.":".$ah_e.":".$ah_f; - $this_port['ifPhysAddress'] = $ah_a.$ah_b.$ah_c.$ah_d.$ah_e.$ah_f; + $this_port['ifPhysAddress'] = zeropad($ah_a).zeropad($ah_b).zeropad($ah_c).zeropad($ah_d).zeropad($ah_e).zeropad($ah_f); } "zeropad($ah_N)" in last +line should be without "h": $ah_N are absent variables! ;) ++++ $this_port['ifPhysAddress'] = zeropad($a_a).zeropad($a_b).zeropad($a_c).zeropad($a_d).zeropad($a_e).zeropad($a_f); dario -- http://www.playnet.it phone +39 055 3226622 - fax +39 055 3226444 Brain Technology s.p.a. - AS 13284 http://www.linkedin.com/in/dariocalamai

2 2

Looking for FabricOS and Eaton Rack Monitor support
by Ciro Iriarte 23 Jan '12

23 Jan '12

Any pointers/help to add support for: - Brocade SAN Switches (FabricOS): Added as unknown device, some traffic data saved. Snmpwalk output: http://pastebin.com/WAq90sFA - Eaton Powerware Rack Monitor: Recognized as UPS (!), no environment data saved. Snmpwalk output: http://pastebin.com/xdT0La6T MIB: http://pastebin.com/gH2W9dvK I kinda suck at php, but would be nice to add support for this devices.. Regards, -- Ciro Iriarte http://cyruspy.wordpress.com --

2 2

VLAN Tabs missing?
by Bruce-Young Majola 23 Jan '12

23 Jan '12

Hi, I just upgraded to the latest version and I noticed that the VLAN Tab is now gone. Although I can still see what VLAN; VLAN number to be precise; an interface belongs to under the device Ports tab, I cannot see any VLAN name like I used to before. Is this by design or has something gone awry with the later code releases? Regards, Bruce DISCLAIMER: The information in this message is confidential and may be legally privileged. It is intended solely for the addressee. Access to this message by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, or distribution of the message, or any action or omission taken by you in reliance on it, is prohibited and may be unlawful. Please immediately contact the sender if you have received this message in error. SWIFTNET and any of its subsidiaries each reserve the right to monitor all e-mail communications through its networks. Thank you.

5 10

syslog on netscreen
by Nicola Percacciante 23 Jan '12

23 Jan '12

Hi, i enabled the syslogd for hp procurve switch works correctly example _2012-01-20 18:27:44_ FFI port A1-High collision or drop rate. See help. _2012-01-20 18:27:44_ FFI port A2-High collision or drop rate. See help. for juniper netscreen i get only that msg _2011-12-15 23:40:56_ NETSCREEN DEVICE_ID=018508200900 _2011-12-15 22:28:56_ NETSCREEN DEVICE_ID=018508200900 In the LOG on linux box i see the follow syslogd raw Jan 23 12:10:39 192.168.198.71 SSG140: NetScreen device_id=0185082009000680 [Root]system-critical-00026: IPSEC tunnel with ID 4000000c fails to authenticate the packet. (2012-01-23 12:10:48) Any idea ? Nicola

1 0

Initial doubts
by Ciro Iriarte 22 Jan '12

22 Jan '12

Hi, I posted some questions in the forum, but the maillist seems to be a lot more active, so I'll summarize them here: 1- Trending Support: Is that on the roadmap?, from what I've read RRD already supports trending.. 2- Collectd: I see there's support for collectd, should I implement it alongside observium?, would that duplicate data?. Which version works nice with observium?, 4.10 or 5.0? Regards, -- Ciro Iriarte http://cyruspy.wordpress.com --

1 0

Changing password for an other user
by Fältman, Mikael 13 Dec '11

13 Dec '11

How do I change password for a user that has forgotten his password ? I know how to change my own password but not for an other user. Regards Mikael F _________________________________________ Mikael Fältman | Service manager Quality & Security | Logica Sweden Ivögatan 5, 295 22 Bromölla | Sweden T: +46 456 475 41 | M: +46 733 98 44 20 mikael.faltman(a)logica.com<mailto:mikael.faltman@logica.com> | www.logica.com <http://www.logica.com/> Think green - keep it on the screen. This e-mail and any attachment is for authorised use by the intended recipient(s) only. It may contain proprietary material, confidential information and/or be subject to legal privilege. It should not be copied, disclosed to, retained or used by, any other party. If you are not an intended recipient then please promptly delete this e-mail and any attachment and all copies and inform the sender. Thank you.

1 0

Patch to monitor by-outlet APC MasterSwitch bars
by Jordan Kirby 08 Dec '11

08 Dec '11

Hi, We have recently installed some APC power bars that can be monitored by outlet (AP8653). I have written a patch for Observium (attached) that creates sensor for each of the ports on a AP8653. The patch also includes getting the input voltage for the newer "rPDU2" type power bars. I found the snmp queries to be slow against these new apcs when returning the current information, hence the increased timeout. Any suggestions/improvements are more than welcome! Regards Jordan

1 0

No authorisation to app apache
by Fältman, Mikael 02 Dec '11

02 Dec '11

Hi My "normal users" can access the page App >> Apache (they are granted access to the device) but the graphs is not displaying. Only the text "No authorization" and a pink graph showing no values. Is this a bugg or do I have to grant access other than to the device for the users ? The Administrator classed users have no problem. Regards Mikael F _________________________________________ Mikael Fältman | Service manager Quality & Security | Logica Sweden Ivögatan 5, 295 22 Bromölla | Sweden T: +46 456 475 41 | M: +46 733 98 44 20 mikael.faltman(a)logica.com<mailto:mikael.faltman@logica.com> | www.logica.com <http://www.logica.com/> Think green - keep it on the screen. This e-mail and any attachment is for authorised use by the intended recipient(s) only. It may contain proprietary material, confidential information and/or be subject to legal privilege. It should not be copied, disclosed to, retained or used by, any other party. If you are not an intended recipient then please promptly delete this e-mail and any attachment and all copies and inform the sender. Thank you.

2 2

Re: [Observium] poller doesn’t kick the apache-stats.py script
by Adam Armstrong 30 Nov '11

30 Nov '11

Aha. Sounds like new behaviour in Ubuntu copied from debian upstream. Its very annoying, as you discovered. Ill need ti mention it in the install guide, as currently its only a footnote for debian! Adam. -- Sent from my Android phone with K-9 Mail. Please excuse my brevity. "Fältman, Mikael" <mikael.faltman(a)logica.com> wrote: Actually: Ubuntu 11.10 Upgraded the distro not long a go. //Mikael Från: observium-bounces(a)observium.org [mailto:observium-bounces@observium.org] För Adam Armstrong Skickat: den 30 november 2011 22:15 Till: Observium Network Observation System Ämne: Re: [Observium] poller doesn’t kick the apache-stats.py script Debian? Or another braindead distro which breaks snmp by removing mibs? Adam -- Sent from my Android phone with K-9 Mail. Please excuse my brevity. "Fältman, Mikael" <mikael.faltman(a)logica.com> wrote: Ah. That was a good switch ! OUTPUT from debug (not working): SQL[SELECT * FROM `applications` WHERE `device_id` = '24'] Applications: /usr/bin/snmpget -v2c -c nmspublic -O qv -M /opt/observium/mibs/ udp:liss-bro-fep1:161 nsExtendOutputFull.6.97.112.97.99.104.101 nsExtendOutputFull.6.97.112.97.99.104.101: Unknown Object Identifier (Sub-id not found: (top) -> nsExtendOutputFull) So I added “NET-SNMP-EXTEND-MIB::” to the file “includes/polling/applications/apache.inc.php” and it solved the problem. Now it all works as expected. New OUTPUT from debug (working): SQL[SELECT * FROM `applications` WHERE `device_id` = '24'] Applications: /usr/bin/snmpget -v2c -c nmspublic -O qv -M /opt/observium/mibs/ udp:liss-bro-fep1:161 NET-SNMP-EXTEND-MIB::nsExtendOutputFull.6.97.112.97.99.104.101 Is it a bug or did I miss something. Some ENV param maybe ? Thank you ! Mikael Från: observium-bounces(a)observium.org [mailto:observium-bounces@observium.org] För Adam Armstrong Skickat: den 30 november 2011 19:34 Till: Observium Network Observation System Ämne: Re: [Observium] poller doesn’t kick the apache-stats.py script Run the Poller for that host in debug. ./poller.php -h <host> -d Adam -- Sent from my Android phone with K-9 Mail. Please excuse my brevity. "Fältman, Mikael" <mikael.faltman(a)logica.com> wrote: ”Observium 0.11.10.2693” I have set up Observium as instructed to monitor an apache server. Everything seems work fine except that there is no data in the graphs . Doing a manual snmp poll from Observium server returns data and the /tmp/apache-snmp file is creataed on the remote server so I know that the script has been executed. (Snmpwalk -O qv -v2c -c xx webhost NET-SNMP-EXTEND-MIB::nsExtendOutputFull -M /opt/observium/mibs) Adding the App to the Device in Observium worked. mysql> select * from applications; +--------+-----------+----------+ | app_id | device_id | app_type | +--------+-----------+----------+ | 1 | 24 | apache | +--------+-----------+----------+ 1 rows in set (0.00 sec) The graphs are created under Apps->Apache But there is no data ! When running the poller.php scrip everythings seems fine. The script outputs: Applications: apache The RRDs is created and the timestamp on the file is updated every 5 min. app-apache-1.rrd A rrdtool dump shows only NAN BUT ! The file /tmp/apache-snmp is not created on the remote server when the poller.php script runs !? (I have removed it after testing) It seems that the poller doesn’t kick the apache-stats.py script on the remote server ! Am I missing something ? Regards Mikael F _________________________________________ Mikael Fältman | Service manager Quality & Security | Logica Sweden Ivögatan 5, 295 22 Bromölla | Sweden T: +46 456 475 41 | M: +46 733 98 44 20 mikael.faltman(a)logica.com | www.logica.com Think green - keep it on the screen. This e-mail and any attachment is for authorised use by the intended recipient(s) only. It may contain proprietary material, confidential information and/or be subject to legal privilege. It should not be copied, disclosed to, retained or used by, any other party. If you are not an intended recipient then please promptly delete this e-mail and any attachment and all copies and inform the sender. Thank you. Think green - keep it on the screen. This e-mail and any attachment is for authorised use by the intended recipient(s) only. It may contain proprietary material, confidential information and/or be subject to legal privilege. It should not be copied, disclosed to, retained or used by, any other party. If you are not an intended recipient then please promptly delete this e-mail and any attachment and all copies and inform the sender. Thank you. Think green - keep it on the screen. This e-mail and any attachment is for authorised use by the intended recipient(s) only. It may contain proprietary material, confidential information and/or be subject to legal privilege. It should not be copied, disclosed to, retained or used by, any other party. If you are not an intended recipient then please promptly delete this e-mail and any attachment and all copies and inform the sender. Thank you.

1 0

poller doesn’t kick the apache-stats.py script
by Fältman, Mikael 30 Nov '11

30 Nov '11

”Observium 0.11.10.2693” I have set up Observium as instructed to monitor an apache server. Everything seems work fine except that there is no data in the graphs . Doing a manual snmp poll from Observium server returns data and the /tmp/apache-snmp file is creataed on the remote server so I know that the script has been executed. (Snmpwalk -O qv -v2c -c xx webhost NET-SNMP-EXTEND-MIB::nsExtendOutputFull -M /opt/observium/mibs) Adding the App to the Device in Observium worked. mysql> select * from applications; +--------+-----------+----------+ | app_id | device_id | app_type | +--------+-----------+----------+ | 1 | 24 | apache | +--------+-----------+----------+ 1 rows in set (0.00 sec) The graphs are created under Apps->Apache But there is no data ! When running the poller.php scrip everythings seems fine. The script outputs: Applications: apache The RRDs is created and the timestamp on the file is updated every 5 min. app-apache-1.rrd A rrdtool dump shows only NAN BUT ! The file /tmp/apache-snmp is not created on the remote server when the poller.php script runs !? (I have removed it after testing) It seems that the poller doesn’t kick the apache-stats.py script on the remote server ! Am I missing something ? Regards Mikael F _________________________________________ Mikael Fältman | Service manager Quality & Security | Logica Sweden Ivögatan 5, 295 22 Bromölla | Sweden T: +46 456 475 41 | M: +46 733 98 44 20 mikael.faltman(a)logica.com<mailto:mikael.faltman@logica.com> | www.logica.com <http://www.logica.com/> Think green - keep it on the screen. This e-mail and any attachment is for authorised use by the intended recipient(s) only. It may contain proprietary material, confidential information and/or be subject to legal privilege. It should not be copied, disclosed to, retained or used by, any other party. If you are not an intended recipient then please promptly delete this e-mail and any attachment and all copies and inform the sender. Thank you.

2 4

draw NA values using different color
by Nikolay Shopik 30 Nov '11

30 Nov '11

Hey, I'm just find this graph http://oss.oetiker.ch/smokeping-demo/?displaymode=n;start=2011-11-30%2012:2… And though it will be nice (if possible) to draw empty(NA) values using different color, like on graph I show.

1 0