- observium - lists.observium.org

Monitoring and Alert of MySQL Replication
by Kevin Riahi 09 Sep '20

09 Sep '20

Hello, Is there a method to monitor MySQL replication status, Master Slave status, and alert on failure? Thank you Kevin.

2 1

Alert on port utilisation percent ?
by Pieter De Wit 08 Sep '20

08 Sep '20

Hi All, Is there a way to alert on port usage percentage ? If so, what is the metric called ? We are *currently* on CE. Thanks, Pieter

3 3

Re: [Observium] Alert on port utilisation percent ?
by Tony Guadagno 08 Sep '20

08 Sep '20

Milton, I disagree, for example, how do you set up a rule to apply to all devices (past and future)? It appears you cannot, however, you could in the past and that are what all the examples show. I like observium quite a lot, however, its these things (like documentation that is not current) that can really frustrate a user. Tony From: Milton Ngan<mailto:milton@valvesoftware.com> Sent: Monday, September 7, 2020 5:05 PM To: Tony Guadagno<mailto:tonyg@guadagno.org>; Observium<mailto:observium@observium.org> Cc: Pieter De Wit<mailto:pieter@insync.za.net> Subject: Re: [Observium] Alert on port utilisation percent ? The only thing that has really change is the association rule set. Instead of it being a text entry like the test conditions, there is now an expression builder, but the fields and operators are still the same. That should be easier that before. The test/check condition documentation is still relevant. That hasn't changed. From: Tony Guadagno <tonyg(a)guadagno.org> Sent: Monday, September 7, 2020 1:59:04 PM To: Milton Ngan; Observium Cc: Pieter De Wit Subject: RE: [Observium] Alert on port utilisation percent ? This is what modern version looks like, unfortunately, there are no docs for this. [cid:image007.png@01D685B3.55A2C860] Tony From: Milton Ngan<mailto:milton@valvesoftware.com> Sent: Monday, September 7, 2020 4:49 PM To: Tony Guadagno<mailto:tonyg@guadagno.org>; Observium<mailto:observium@observium.org> Cc: Pieter De Wit<mailto:pieter@insync.za.net> Subject: Re: [Observium] Alert on port utilisation percent ? I can't really say what "modern" Observium looks like, I haven't updated our SVN pull for a while. But the version we are running has Test Conditions and the syntax for those looks like what is on the examples page, so I assumed that this should still be relevant. Hopefully Pieter can figure it out from there. From: Tony Guadagno <tonyg(a)guadagno.org> Sent: Monday, September 7, 2020 1:43:35 PM To: Observium; Milton Ngan Cc: Pieter De Wit; Observium Subject: RE: [Observium] Alert on port utilisation percent ? There is a problem with these examples, they don’t work for modern Observium. Now that observium uses test conditions and “association rulesets”, the documentation is broke and you cannot implement these examples the way they are shown. It would be REALLY helpful to have updated documentation. I am stull struggling with checkers because it is all trial and error. Tony From: Pieter De Wit via observium<mailto:observium@observium.org> Sent: Monday, September 7, 2020 4:18 PM To: Milton Ngan<mailto:milton@valvesoftware.com> Cc: Pieter De Wit<mailto:pieter@insync.za.net>; Observium<mailto:observium@observium.org> Subject: Re: [Observium] Alert on port utilisation percent ? How did I miss that….Thanks ! On 8/09/2020, at 07:58, Milton Ngan <milton(a)valvesoftware.com<mailto:milton@valvesoftware.com>> wrote: Use ifInOctets_perc, an example of this is in the docs. https://docs.observium.org/alerting_examples/ Example Alert Checkers - Observium<https://docs.observium.org/alerting_examples/> docs.observium.org<http://docs.observium.org/> Observium Documentation From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> on behalf of Pieter De Wit via observium <observium(a)observium.org<mailto:observium@observium.org>> Sent: Monday, September 7, 2020 12:46:46 PM To: Observium Cc: Pieter De Wit Subject: [Observium] Alert on port utilisation percent ? Hi All, Is there a way to alert on port usage percentage ? If so, what is the metric called ? We are *currently* on CE. Thanks, Pieter _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 2

Re: [Observium] Alert on port utilisation percent ?
by Tony Guadagno 07 Sep '20

07 Sep '20

There is a problem with these examples, they don’t work for modern Observium. Now that observium uses test conditions and “association rulesets”, the documentation is broke and you cannot implement these examples the way they are shown. It would be REALLY helpful to have updated documentation. I am stull struggling with checkers because it is all trial and error. Tony From: Pieter De Wit via observium<mailto:observium@observium.org> Sent: Monday, September 7, 2020 4:18 PM To: Milton Ngan<mailto:milton@valvesoftware.com> Cc: Pieter De Wit<mailto:pieter@insync.za.net>; Observium<mailto:observium@observium.org> Subject: Re: [Observium] Alert on port utilisation percent ? How did I miss that….Thanks ! On 8/09/2020, at 07:58, Milton Ngan <milton(a)valvesoftware.com<mailto:milton@valvesoftware.com>> wrote: Use ifInOctets_perc, an example of this is in the docs. https://docs.observium.org/alerting_examples/ Example Alert Checkers - Observium<https://docs.observium.org/alerting_examples/> docs.observium.org<http://docs.observium.org/> Observium Documentation From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> on behalf of Pieter De Wit via observium <observium(a)observium.org<mailto:observium@observium.org>> Sent: Monday, September 7, 2020 12:46:46 PM To: Observium Cc: Pieter De Wit Subject: [Observium] Alert on port utilisation percent ? Hi All, Is there a way to alert on port usage percentage ? If so, what is the metric called ? We are *currently* on CE. Thanks, Pieter _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 3

Seperate Juniper Flow Sessions from Max
by Pieter De Wit 07 Sep '20

07 Sep '20

Hi, We have a Juniper firewall and its Max Flow Sessions is a *lot* higher than what is currently used. Is there a way to seperate these values onto 2 graphs (without using custom OIDs) ? Thanks, Pieter

1 0

IPSEC Tunnel graphs - Def Error
by Dale Chambers 07 Sep '20

07 Sep '20

Hi, I we predominantly have Cisco devices which is monitored via Observium. I have noticed that there is an issue showing graphs of IPSEC Tunnels. I am not sure when this started to fail but I am on version 20.8.10644. I have checked amongst several different devices and they all show the same error. This is tested on ASA5506, ASA5525, Cisco 1921, Cisco 2911 and Cisco 4331. All graphs shows 'Def Error' [cid:image007.png@01D6829C.C6E0D220] How do I resolved this issue? I have already tried running the discovery.php -h all, and I have even upgraded to 20.9.10652 and still having the same issue. Many Thanks Dale CONFIDENTIALITY AND PRIVACY POLICY This communication is private and the information contained in this email and any attachments may be privileged, commercially sensitive, confidential, proprietary to NSSLGlobal Limited or otherwise legally exempt from disclosure. If you are not the intended recipient or have been sent this in error, you are prohibited from using, copying, relying upon, or disseminating the information, and the sender disclaims any liability for such unauthorised use. Further, if you are not the intended recipient, please notify the sender immediately and delete all copies of this message. In accordance with our email policy, emails sent or received may be monitored. Thank you. We have recently updated our Privacy Policy, which can be accessed at https://www.nsslglobal.com/uploads/documents/NSSLGlobal_Privacy_Policy.pdf We will hold and manage personal data that you provide us with in accordance with this Privacy Policy.

2 3

Enabling MIB and custom values support
by Marian Rychtecky 07 Sep '20

07 Sep '20

Hi all, I do have two questions with different topics, but I didn't want to send multiple emails. Hope you don't mind. First question is probably very simple, however I cannot find out - I need to collect information from Cisco devices using " CISCO-NETWORK-VIRTUALIZATION-OVERLAY-MIB". This MIB is part of Observium. How I will "activate" collecting these MIB values from a device please? I do have almost all modules active and I don't know how to add MIB to a certain device (not all devices, just 3 of them). Second question - as more and more devices (such as Arista) are giving up on SNMP turning slowly to REST APIs or similar methods, is there any way to push information to Observium using its own (python/php) script? I would imagine any kind of value mapping to graphs and then collecting values from scripts or JSON file.... Thank you for your time and support. Marian -- Marian Rychtecký mr(a)nix.cz Phone +420 724 397 441 NIX.CZ z.s.p.o. Americká 23, Praha 2 130 52 Czech Republic http://www.nix.cz

2 1

Connect to device icon?
by Chris Macneill 05 Sep '20

05 Sep '20

Hi, I was sure at one point there was a "Connect to device/terminal" icon in Observium, but either I'm mistaken and it was never there or now so buried I can no longer find it. Whilst hostnames and/or IP addresses are shown in Observium, they generally have active links attached to them to take you to other screens in Observium, this makes it hard to copy these into a Browser to gain access to the device's GUI. It would be nice to have a "Connect to device" icon next to the IP/Hostname that will make it much easier to click through to the device's own GUI. We recently started using Ubiquiti's UNMS monitoring system which is good for Ubiquiti devices, but pretty lousy for anything else. UNMS has a "Copy to clipboard" icon next to each IP address making it really easy to then connect to the device's GUI. I like the "Copy to clipboard" method rather than a URL link, as this is generic and you can then copy and paste into a browser or any other application. Regards Chris Macneill

4 7

Request for adding support for VELOCLOUD MIBS
by Sujith S 05 Sep '20

05 Sep '20

Hello Team, Kindly add the Support for VELOCLOUD MIBS. Please let me know what information is needed for this Support to be added. -- Regards Sujith

3 8

Again Reset GEO location
by Jacek.Dabrowski＠selgros.pl 04 Sep '20

04 Sep '20

Hello, Is it possible to reset the GEO location via cli ??? I have such a case, GEO displays 2dev, it's actually 30, the address is the same (same location), geo reset helps but for 30 devices it's tiring. [cid:image001.png@01D6829D.8F80D630] Regards Jacek Dąbrowski

1 0

BGP Session Monitoring on ASR9900
by Serghei Golipad 03 Sep '20

03 Sep '20

Hi All, Is anyone monitoring VPNV4/VRF BGP sessions? I can see Observium is successfully discovering peers but not showing state for some reason. Is anyone having same issues? I'm on 7.0.2 of IOS-XR code. Cheers PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 1 New Change, London, EC4M 9AF. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

4 10

Difference in polling between community and professionnal edition ?
by mosdvas 02 Sep '20

02 Sep '20

Hello, I've been using Observium for a few months in my company and I'm thinking about upgrading to the professional version. Does this version add more powerful mibs on hardware or add some fonctionnality on WMI polling ? Like for example : - BGP & Peering session on Mikrotiks (CCRXXX) - spooler tracking on Zebra printers - Windows's wmi poller able to list services and their states Best Regards,

1 0

Alert Check - Monitoring Cisco Stack Redundancy
by Mezzadri, Steven 01 Sep '20

01 Sep '20

Hello, I was wondering if anyone could help me write a better alert checker to determine if a Cisco stack has a missing member. Occasionally, one member of a stack will fail, but the stack continues to operate so it's not in a "down" state. I would like to get a notification when that happens. I am currently monitoring all stack ports, but any unused stack ports show "down" as well, so I'm looking for a better solution. [image: image.png] I would like to use another status indicator such as "stack is redundant" or "stacking state": [image: image.png] Perhaps cswRingRedundant ? [image: image.png] Could anyone assist me with how to construct an alert check to accomplish this? Thanks! -- Steven Mezzadri Network Engineer

3 3

Observium upgrade
by Marian Rychtecky 31 Aug '20

31 Aug '20

Hi Mike and all, today I upgraded Observium to the latest stable version 20.8.10645. After the upgrade system deleted sensors PSUs, CPUs and FANs on ALL Nexus switches. Please note there was no change on devices nor network, I just performed svn update on Observium. Thank you Marian -- Marian Rychtecký mr(a)nix.cz Phone +420 724 397 441 NIX.CZ z.s.p.o. Americká 23, Praha 2 130 52 Czech Republic http://www.nix.cz

2 2

Uninstall Observium on Ubuntu 18.04
by Kelley, Ronald E. 30 Aug '20

30 Aug '20

All, Want to uninstall Observium Community Edition on Ubuntu 18.04 box. Need to preserve all other content on the box. Have not seen any instructions about how to do so, but thought I would ask. Thank you. Ronald Kelley Administrative Director IT Infrastructure Operations Information Technology Division Houston Methodist Houston Methodist. Leading Medicine. Houston Methodist is ranked by U.S. News & World Report as the No. 1 hospital in Texas for patient care and safety and one of the top 20 hospitals in the nation. In addition, we are nationally ranked in 11 specialties, the most in the state, and have been national leaders throughout the COVID-19 pandemic in research, offering innovative treatments and surpassing CDC safety standards. For more than 100 years, Houston Methodist has provided the best — and safest — clinical care, advanced technology and patient experience. That is our promise of leading medicine. houstonmethodist.org twitter.com/MethodistHosp facebook.com/HoustonMethodist ***CONFIDENTIALITY NOTICE*** This e-mail is the property of Houston Methodist and/or its relevant affiliates and may contain restricted and privileged material for the sole use of the intended recipient(s). Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender and delete all copies of the message. Thank you.

1 0

observium docker/Kubernetes install
by Simon Mousey Smith 27 Aug '20

27 Aug '20

Hi all I wondered if anybody has setup observium inside a docker container or even inside a Kubernetes cluster? If they have: are they running it fine? How does it preform? what’s the usage like? Only reason I’m asking if I’m looking sadly to move all our VMs (50) into smaller containers (10) and running Kubernetes as most things can be done by containers I’m just yet to find anyone with an observium container? Regards Simon Sent from my iPhone

1 0

Re: [Observium] Connect to device icon?
by Chris Macneill 27 Aug '20

27 Aug '20

I'm using the Subscription version, so maybe I remember from the days before we paid and were using the CE version. In the Subscription version under the Device Cog the "Connect via" options are replaced by a "Show Tech Support" icon, but nothing in there to connect anywhere. Looks like feature has somehow dropped off Subscription version, I'm a full administrator so should be able to see anything the system has to offer. Currently running 20.8.10631 (stable). Regards Chris Macneill From: "Michael" <obslist(a)smarsz.com> To: "observium" <observium(a)observium.org> Cc: "Chris Macneill" <cmacneill(a)cmit.nz> Sent: Thursday, 27 August, 2020 16:28:35 Subject: Re: [Observium] Connect to device icon? Hi, I the options that you are looking for are found on the device settings cog (not the global settings cog). At least, that's where they are on my CE install. I tried to screen grab the [ http://demo.observium.org/ | demo.observium.org ] instance for you, but it appears that it may also be specific to user account priveleges (or the option has fallen off between CE and current PE). Here's the screenshot from my install. Cheers, Michael On 27 Aug 2020, at 8:56 am, Chris Macneill via observium < [ mailto:observium@observium.org | observium(a)observium.org ] > wrote: Hi, I was sure at one point there was a "Connect to device/terminal" icon in Observium, but either I'm mistaken and it was never there or now so buried I can no longer find it. Whilst hostnames and/or IP addresses are shown in Observium, they generally have active links attached to them to take you to other screens in Observium, this makes it hard to copy these into a Browser to gain access to the device's GUI. It would be nice to have a "Connect to device" icon next to the IP/Hostname that will make it much easier to click through to the device's own GUI. We recently started using Ubiquiti's UNMS monitoring system which is good for Ubiquiti devices, but pretty lousy for anything else. UNMS has a "Copy to clipboard" icon next to each IP address making it really easy to then connect to the device's GUI. I like the "Copy to clipboard" method rather than a URL link, as this is generic and you can then copy and paste into a browser or any other application. Regards Chris Macneill _______________________________________________ observium mailing list [ mailto:observium@observium.org | observium(a)observium.org ] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Reducing WiFi Error Alerts
by Chris Macneill 27 Aug '20

27 Aug '20

Hi, We get a lot of WiFi error alerts from Ubiquiti devices clogging up our event log. Most devices in Observium have a number of Sensors listed which allows thresholds to be adjusted to receive only genuine issues and reduce the noise level. Ubiquiti WiFi devices have no sensors listed for each device, so apparently no way to adjust thresholds? Regards Chris Macneill

1 0

Re: [Observium] Cisco ASR9K Monitoring
by Serghei Golipad 26 Aug '20

26 Aug '20

Hi All, Is anyone monitoring BGP vpnv4/vrf sessions? I’m not seeing status of them although they are being discovered: [cid:image001.png@01D67BA3.902ECC00] One thing to note, we’ve replaced original device and this new one was named as the old one (diff vendor), so might be screwed UP DB? Cheers PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 1 New Change, London, EC4M 9AF. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

1 0

Re: [Observium] Cannot login to my observium UI after the upgrade
by Renuka Arya 24 Aug '20

24 Aug '20

That seems to totally work! Thanks! Regards Renuka Arya On Mon, Aug 24, 2020 at 11:03 AM Adam Armstrong <adama(a)observium.org> wrote: > Hi, > > > > We drop sessions when the IP changes. I’m not quite sure why anymore, but > it was a security thing we added a few years ago. > > > > You can disable this behaviour with : > > > > $config['web_session_ip'] = FALSE; // Bind user sessions to his > IP address > > > > This setting is in the web config in Authentication -> Sessions -> Session > bind to IP > > > > Thanks, > > Adam. > > > > > > *From:* Renuka Arya <rarya(a)uchicago.edu> > *Sent:* 24 August 2020 16:52 > *To:* Adam Armstrong <adama(a)observium.org>; Renuka Arya via observium < > observium(a)observium.org> > *Subject:* Re: [Observium] Cannot login to my observium UI after the > upgrade > > > > Hi Adam! > > > > Few update! > > > > We figured that we are able to access the observium server just fine (no > authentication issues); if we access it directly. > > > > The issue arises when we try to thought our F5 load balancer setup; where > the Virtual IP/host is configure on F5 pointing to the server running the > observium. We have opened up a case with F5 to investigate more into it. > But was wondering if you have seen any issues with new code [20.7.10549] > going via a LB/proxy or as such. > > > > > > Please see the attached screenshots for reference; > > > > > > > > > > Regards > > Renuka Arya > > > > On Mon, Aug 10, 2020 at 10:16 AM Adam Armstrong <adama(a)observium.org> > wrote: > > You should probably upgrade the system to 18.04 (and then probably 20.04, > Observium gets a lot of benefit from performance improvements in the newer > PHP and RRDtool) and then svn up again. > > > > It might well be quicker to transplant the install to a new 20.04 install, > Observium is only the MySQL db, the rrd directory and the config.php. > > > > You can follow the install guide and then replace these at the end of the > install. > > > > Adam. > > > > *From:* Renuka Arya <rarya(a)uchicago.edu> > *Sent:* 10 August 2020 15:52 > *To:* Adam Armstrong <adama(a)observium.org> > *Subject:* Re: [Observium] Cannot login to my observium UI after the > upgrade > > > > So, what are your suggestions? > > > > Our current database is for 20.7.10615. But the code it is running is > 19.6.9932 > > > > I understand, we prolly need to upgrade PHP to 7.1 or 7.2 ; not sure in > what sequence should be running the svp updates? > > > > > > > > > > Regards > > Renuka Arya > > > > > > > > > > On Mon, Aug 10, 2020 at 8:55 AM Adam Armstrong <adama(a)observium.org> > wrote: > > I think the problems come from PHP 7.0, I think it has some issues. Our > minimum requirement is 7.1, though I think we need to change that to 7.2 > now. > > > > The latest stable is whatever the revision of the last change to the > stable tree is: > > > > https://www.observium.org/versions.php > <https://urldefense.com/v3/__https:/www.observium.org/versions.php__;!!BpyFH…> > > > > "stable":{"version":"20.7.10549","revision":"10549","date":"2020-07-03"} > > "current":{"version":"20.7.10614","revision":"10614","date":"2020-07-24"} > > > > The versions are not important numbers, they’re just autogenerated > revisions within svn. > > > > Adam. > > > > *From:* Renuka Arya <rarya(a)uchicago.edu> > *Sent:* 10 August 2020 14:37 > *To:* Adam Armstrong <adama(a)observium.org> > *Subject:* Re: [Observium] Cannot login to my observium UI after the > upgrade > > > > lacadmin@kh26-42:~$ lsb_release -a > No LSB modules are available. > Distributor ID: Ubuntu > Description: Ubuntu 16.04.5 LTS > Release: 16.04 > Codename: xenial > > > > lacadmin@kh26-42:~$ php -v > PHP 7.0.33-0ubuntu0.16.04.15 (cli) ( NTS ) > Copyright (c) 1997-2017 The PHP Group > Zend Engine v3.0.0, Copyright (c) 1998-2017 Zend Technologies > with Zend OPcache v7.0.33-0ubuntu0.16.04.15, Copyright (c) 1999-2017, > by Zend Technologies > > > > > > lacadmin@kh26-42:~$ mysql -V > mysql Ver 15.1 Distrib 10.2.21-MariaDB, for debian-linux-gnu (x86_64) > using readline 5.2 > > > > What is the latest stable version of Observium? > > Version 20.7.10614 ? > > > > > > > > On Mon, Aug 10, 2020 at 8:24 AM Adam Armstrong <adama(a)observium.org> > wrote: > > You’re still running schema 432, the database can’t be downgraded. I’m not > sure exactly what has changed in that time, but likely a number of things > will be broken. > > > > What is this running on? What is the PHP and MySQL/Mariadb version? > > > > Adam. > > > > *From:* Renuka Arya <rarya(a)uchicago.edu> > *Sent:* 10 August 2020 14:18 > *To:* Adam Armstrong <adama(a)observium.org> > *Subject:* Re: [Observium] Cannot login to my observium UI after the > upgrade > > > > Hello > > > > We run the following commands, when we first were trying to upgrade: > > 1) svn update > > 2) ./discovery.php -u > > It ran as: > > root@kh26-42:/opt/observium# ./discovery.php -u ___ _ _ > / _ \ | |__ ___ ___ _ __ __ __(_) _ _ _ __ ___ > | | | || '_ \ / __| / _ \| '__|\ \ / /| || | | || '_ ` _ \ > | |_| || |_) |\__ \| __/| | \ V / | || |_| || | | | | | > \___/ |_.__/ |___/ \___||_| \_/ |_| \__,_||_| |_| |_| > Observium Professional 20.7.10615 > https://www.observium.org <https://urldefense.com/v3/__https:/www.observium.org/__;!!BpyFHLRN4TMTrA!u_…>-- Updating database/file schema > 412 -> 413 # (php) Done (0s). > 413 -> 414 # (db) . Done (15s). > 414 -> 415 # (php) Unificate GEO Country names: . Done (1s). > 415 -> 416 # (db) .. Done (2s). > 416 -> 417 # (db) .. Done (4s). > 417 -> 418 # (db) . Done (1s). > 418 -> 419 # (db) .... Done (3s). > 419 -> 420 # (db) .. Done (3s). > 420 -> 421 # (db) ... Done (2s). > 421 -> 422 # (db) .. Done (0s). > 422 -> 423 # (db) ...... Done (9s). > 423 -> 424 # (php) Update IPv4 addresses: ........................................................................................................................................................................................................................................................................................................... > Update IPv6 addresses: ..................... > Done (0s). > 424 -> 425 # (db) . Done (29s). > 425 -> 426 # (db) ............... Done (16s). > 426 -> 427 # (db) ... Done (44s). > 427 -> 428 # (db) ... Done (3s). > 428 -> 429 # (db) ..... Done (7s). > 429 -> 430 # (db) (WARNING! Required MySQL version 5.6+ or MariaDB 10.0+)... Done (0s). > 430 -> 431 # (db) ..... Done (4s). > 431 -> 432 # (php) Done (1s). > -- Done. > > > > This upgraded from Observium 19.6.9932 to Observium Professional > 20.7.1061 > > > > We noticed this > > 429.sql:ALTER TABLE `autodiscovery` ADD INDEX `remote_hostname_ip` (`poller_id`, `remote_hostname`, `remote_ip`); > 430.sql:ALTER TABLE `autodiscovery` ADD INDEX `remote_hostname_ip` (`poller_id`, `remote_hostname`, `remote_ip`); > > > > When we tried to login as my user/admin; it will let me in but as an > `unauthenticated` user BUT will not display stuff properly; infact will > kick me out , when I tried to click on things. It seems the poller were > still working but authentication was broken > > > > At this point we downgraded observium as: > > > > 1) svn update -r 9932. > > > > And we could see the schema in /opt/observium/update was upto 412.sql > > > > 2. We did not run ./discovery -u after this. > > > > After doing this I can login to observium just fine and see all the graphs > etc just fine > > > > > > Thanks! > > > > Regards > > Renuka Arya > > ./ > > > > On Sun, Aug 9, 2020 at 9:44 PM Adam Armstrong <adama(a)observium.org> wrote: > > You don’t run discovery after downgrading, you run it after upgrading. > > > > You can’t downgrade because database changes are not reversible. > Downgrading will probably break your database. > > > > The latest stable version is whatever Observium says it is after you do > “svn up”. Ignore what SVN says, that’s just the repository revision. > > > > Did you run discovery -u after the initial upgrade attempt? > > > > Adam. > > > > *From:* Renuka Arya <rarya(a)uchicago.edu> > *Sent:* 07 August 2020 14:23 > *To:* Adam Armstrong <adama(a)observium.org> > *Cc:* Renuka Arya via observium <observium(a)observium.org> > *Subject:* Re: [Observium] Cannot login to my observium UI after the > upgrade > > > > Hi Adam, > > > > Thanks for your reply! > > > > No we didn't run ./discovery.php -u after downgrading to 19.6.9932. I am > supposing we should not run it as it's going to break the DB? > > > > What options do we have now? > > > > Also, what is the latest stable release; svn update, updates it to 20.7.10615 > whereas observium says it is Version 20.7.10614 > > > > > > > > > > > > On Thu, Aug 6, 2020 at 8:57 PM Adam Armstrong <adama(a)observium.org> wrote: > > Hi, > > Did you run ./discovery.php -u ? > > If you didn't, that'd explain it. If you did, downgrading will break your > database. > > But if it you had done that and it wasn't working, the likely causes are > either database desync or local modifications. > > The former is pretty difficult and time consuming to track down, and > usually involves removing the database and readding all of the devices. > > Adam. > > Sent from BlueMail > <https://urldefense.com/v3/__http:/www.bluemail.me/r?b=15919__;!!BpyFHLRN4TM…> > > On 6 Aug 2020, at 19:18, Renuka Arya via observium < > observium(a)observium.org> wrote: > > Update ; so we rolled back to the current version - O bservium 19.6.9932 > and it seems to be fixed now. > > > > However, we noticed two things: > > 1) when we run 'svn update' it never prompts for user/pwd. Please note > that we have a valid subscription & user/pwd > > 2) After we run 'svn update' it updates to 20.7.10615 . However, our > observium site says : So lookslike just running svn update is not updating > to current stable version? > > > There is a newer revision of Observium available! > > Version 20.7.10614 (6th August 2020) is 682 revisions ahead. > > > > On Thu, Aug 6, 2020 at 11:18 AM Renuka Arya < rarya(a)uchicago.edu> wrote: > > Hello Team, > > > > I upgraded my Observium from Observium 19.6.9932 to Observium > Professional 20.7.10615 this morning. > > > > I cannot login to the UI now; With my user and admin user it lets me in as > unauthenticated, shows broken graphs and kicks me out or would say *Remote > IP has changed.* > > > > > > and we see this > > > > [2020/08/06 09:47:42 -0500] discovery.php(8383): ====== Schema update 429 -> 430 ============== > [2020/08/06 09:47:42 -0500] discovery.php(8383): Query: ALTER TABLE `autodiscovery` ADD INDEX `remote_hostname_ip` (`poller_id`, `remote_hostname`, `remote_ip`); > [2020/08/06 09:47:42 -0500] discovery.php(8383): Error: (1061) Duplicate key name 'remote_hostname_ip' > > > > Any help will be appreciated! > > > > > > Thank you! > > > > > > > > Regards > > Renuka Arya > > > > > > ------------------------------ > > > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium <https://urldefense.com/v3/__http:/postman.memetic.org/cgi-bin/mailman/listi…> > >

1 0

Syslog alert checker functionality / OID "group" alerts (FC Port Monitoring)
by Markus Mohr 24 Aug '20

24 Aug '20

Hiya! Two questions or requests for some problems that just showed up. 1. Syslog with additional alert checker functionality We use observiums syslogserver for most of our systems and syslog alerts of course. Problem is, we can't set a delay. Like 1 system, 4 reports in 10 Minutes = alert. Is there any way this could be implemented or is already planned for observium? Main reason is, that we have some systems that need to alert, but only after a specific threshold. Otherwise we get flooded with senseless alarms. Waking up in the middle of the night because of a false alert sucks a bit :) 2. Building OID groups / FC Port monitoring We need a check for our FC switches to report, if a port has the wrong config and runs as FL instead of F. MIB and custom OID are no problem in this case, would be OID 1.3.6.1.2.1.75.1.2.1.1.3 - and it works. BUT I need to add a custom OID for every port, so 1.3.6.1.2.1.75.1.2.1.1.3.1.1, 1.3.6.1.2.1.75.1.2.1.1.3.1.2 etc. and create an alert check for every OID. Adding 24 or more custom OID etc. and the checks . well, sucks a bit. Any idea how this could be better managed? Best wishes Markus MOHR IT-Infrastruktur TakeASP AG

1 0

FW: Observium
by Christos Aivazoglou 21 Aug '20

21 Aug '20

Hello Guys, Can anyone provide us a little bit help? Thank you very much and sorry for any inconvenience Best regards, Christos Aivazoglou VIPA Group Tel : +30 2310 811788 / 811688 -Ext. 44 <http://www.vipa.ch/> www.vipa.ch This e-mail, and any files and attachments transmitted with it, is confidential. It is intended for the sole use of the named recipients(s) only. If you have received this message in error, please immediately notify us by replying to this message and then permanently delete it. Any views and opinions expressed are those of the individual author/sender and are not necessarily shared or endorsed by VIPA Lausanne S.A. or any associated or related company. This e-mail transmission is not binding for the purposes of forming a contract and does not form a contractual obligation of any type From: Christos Aivazoglou <christos.aivazoglou(a)vipa.ch> Sent: Τετάρτη, 12 Αυγούστου 2020 5:18 μμ To: adama(a)observium.org Subject: Observium Hello Boss, I hope you are very well, recently we bought your product we would like to learn how can we use the Probe and winservice alerts can you help us? Thank you very much ! Best regards, Christos Aivazoglou VIPA Group Tel : +30 2310 811788 / 811688 -Ext. 44 <http://www.vipa.ch/> www.vipa.ch This e-mail, and any files and attachments transmitted with it, is confidential. It is intended for the sole use of the named recipients(s) only. If you have received this message in error, please immediately notify us by replying to this message and then permanently delete it. Any views and opinions expressed are those of the individual author/sender and are not necessarily shared or endorsed by VIPA Lausanne S.A. or any associated or related company. This e-mail transmission is not binding for the purposes of forming a contract and does not form a contractual obligation of any type

3 2

Ghost devices in alert checker
by Daniel Johansson 19 Aug '20

19 Aug '20

Hi I created a new alert checker today and it seems I have 2 ghost devices showing up now. Neither of the other alert checkers have them showing up. Could there be some issue in the db or can I find out which devices it picks up? When I click on the entitys it just says: No valid device specified A valid device was not specified in the URL. Please retype and try again. -- Any ideas? ---- Regards Daniel

2 2

Reset GEO location
by Jacek.Dabrowski＠selgros.pl 14 Aug '20

14 Aug '20

Hello, Is it possible to reset the GEO location via cli ??? I have such a case, GEO displays 2dev, it's actually 30, the address is the same (same location), geo reset helps but for 30 devices it's tiring. [cid:image001.png@01D67246.59C7ECC0] Regards Jacek Dąbrowski

1 0

Spam Folder
by Walter Onda 13 Aug '20

13 Aug '20

Hello Adam I got all messages from observium in my spam folder. Return-Path: <observium-bounces(a)observium.org> Received: from s053.cyon.net ....... 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.5 FROM_IS_REPLY_TO From and Repply-To is the same -0.5 FROM_IS_TO From and To is the same 7.0 SPF_FAIL SPF: sender does not match SPF record (fail) [SPF failed: Please see http://www.openspf.net/Why?s=mfrom;id=observium-bounces%40observium.org;ip=…] 0.0 T_KAM_HTML_FONT_INVALID BODY: Test for Invalidly Named or Formatted Colors in HTML 0.0 HTML_MESSAGE BODY: HTML included in message -1.0 MAILING_LIST_MULTI Multiple indicators imply a widely-seen list manager 1.3 RDNS_NONE Delivered to internal network by a host with no rDNS X-Spam-Flag: YES ..... Are some parameter missing for SPF? Regards Walter

1 0