- observium - lists.observium.org

Cat6K fabric stats
by Robert Williams 10 Apr '19

10 Apr '19

Hi, Did the Cat6k Fabric Load Statistics get removed (all supervisors and chassis sizes)? Just gone to look for something and found it no longer there, can't say 'when' it might have gone I'm afraid as it's not something commonly looked at by us. Not sure which MIB it would have been in either, but now it's not there I can't work out how to check where it used to be, of course :) Cheers! Robert Williams Custodian Data Centres https://www.CustodianDC.com

3 5

Distributed Poller
by Ron Culler 10 Apr '19

10 Apr '19

I know in a standard install with a single server the poller_id is 0 in the DB. For a distributed poller setup do we need to specify $config[poller_id] in the config.php file on each poller? And how do we specify the poller_id when devices are added to the system? Thanks Ron Culler

5 11

Some graphs "choppy"
by Adam Ward 09 Apr '19

09 Apr '19

Hello, Some graphs are showing choppy as if there were issues writing the RRD’s. That’s not the case as other graphs are just fine. Is this some kind of device-specific issue? Maybe I should raise the timeout for SNMP? I don’t see anything in the verbose poller logs that would indicate an issue. o PAN-COMMON-MIB CMD[/usr/bin/snmpget -t '30' -r '5' -v2c -c XXX -Pu -OQUvs -m PAN-COMMON-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp:/opt/observium/mibs/paloalto 'udp':'device.firewall':'161' panSessionActive.0] CMD EXITCODE[0] CMD RUNTIME[0.0142s] STDOUT[ 52275 ] SNMP STATUS[TRUE] RRD /opt/observium/rrd/device.firewall/panos-sessions.rrd already exists - no need to create. RRD CMD[update device.firewall/panos-sessions.rrd N:52275 --daemon unix:/var/run/rrdcached.sock] RRD RUNTIME[0.0011s] RRD STDOUT[OK u:0.01 s:0.01 r:1.61] RRD_STATUS[TRUE] Adam Ward Systems Engineer Shamrock Trading Corporation Office Phone/Fax: (913) 310-2247 Email: award(a)rtsfinancial.com<mailto:award@rtsfinancial.com> Website: www.shamrocktradingcorp.com<http://www.shamrocktradingcorp.com/> This e-mail communication (including any attachments) is intended only for use by the individual or entity named above and is considered confidential. If you are not the intended recipient, or the employee or agent responsible to deliver it to the intended recipient, you should immediately stop reading this message and delete it from your system. Any unauthorized reading, distribution, copying or other use of this communication (or its attachments) is strictly prohibited.

2 2

Best practice ad method of full observium backup?
by Henrik Cednert (Filmlance) 05 Apr '19

05 Apr '19

Hello What’s the best practice when it comes to backup of observium? Are there any built in mechanisms or scripts for it? I did a quick search but only found a few very old post about it so I want to make sure nothing have changed. Cheers and thanks. -- Henrik Cednert / + 46 704 71 89 54 / CTO / Filmlance Disclaimer, the hideous bs disclaimer at the bottom is forced, sorry. ¯\_(ツ)_/¯ Disclaimer The information contained in this communication from the sender is confidential. It is intended solely for use by the recipient and others authorized to receive it. If you are not the recipient, you are hereby notified that any disclosure, copying, distribution or taking action in relation of the contents of this information is strictly prohibited and may be unlawful.

2 2

Detected Entity Types - How to Find
by Adam Ward 04 Apr '19

04 Apr '19

Team, The most difficult part of alert checker creation is finding all the detected entity types to alert for. I noticed for Linux, there’s a special entity type for average CPU, but I cannot figure out how to see what’s available? I see this on the entity page, but how do I know what that entity is named? Special Situations¶<https://docs.observium.org/entities/#special-situations_1> On UNIX/Linux systems we generate a special "Average" processor entity by calculating the average cpu load for all processors. Use this for alerting on UNIX/Linux. Adam Ward Systems Engineer Shamrock Trading Corporation Office Phone/Fax: (913) 310-2247 Email: award(a)rtsfinancial.com<mailto:award@rtsfinancial.com> Website: www.shamrocktradingcorp.com<http://www.shamrocktradingcorp.com/> This e-mail communication (including any attachments) is intended only for use by the individual or entity named above and is considered confidential. If you are not the intended recipient, or the employee or agent responsible to deliver it to the intended recipient, you should immediately stop reading this message and delete it from your system. Any unauthorized reading, distribution, copying or other use of this communication (or its attachments) is strictly prohibited.

2 5

Juniper FRU temperature missing
by Luis Balbinot 04 Apr '19

04 Apr '19

Hi. Is anyone else using Juniper devices missing the temperature measurement for FRUs? I'm not discovering temperature for CPUs, PSUs, etc. I've noticed some code being remove from r9663 and that might be it. Was it moved elsewhere and is not working properly? Luis

2 1

Quiet hours
by Ricardo Franco Cantero 04 Apr '19

04 Apr '19

Hi, Is there a way to mute notifications between certain hours? We would like to mute the notifications during the night or during Holidays. Kind regards, Ricardo Franco

3 2

Cisco WLC
by Jacek.Dabrowski＠selgros.pl 04 Apr '19

04 Apr '19

Hello, Is it possible to extend the functionality for the Cisco Wireless Controller, currently it is a bit scantily. [cid:image002.jpg@01D43938.C6DD2300] I think about the AP list: [cid:image006.jpg@01D43938.C6DD2300] Or free license for AP for monitoring count: [cid:image011.jpg@01D43938.C6DD2300] OID Object Type Value 1.3.6.1.4.1.9.9.543.1.2.3.1.11.1.1.2 clmgmtLicenseUsageCountRemaining GAUGE 15 Pozdrawiam Jacek Dąbrowski Koordynator Administratorów IT [cid:image012.jpg@01D43938.C6DD2300] Transgourmet Polska Sp. z o.o. Zamenhofa 133, 61-131 Poznań, Polska tel.: +48 61 87 42 017 kom.:+48 604 069 933 E-mail: Jacek.Dabrowski(a)selgros.pl www.selgros.pl<http://www.selgros.pl> www.selgros24.pl<http://www.selgros24.pl> www.transgourmet.pl<http://www.transgourmet.pl> Transgourmet Polska Sp. z o.o. jest zarejestrowana w Sądzie Rejonowym Poznań-Nowe Miasto i Wilda w Poznaniu, Wydział VIII Gospodarczy Krajowego Rejestru Sądowego pod nr KRS: 0000045597. NIP: PL 781-10-11-998, REGON 630375413. Wysokość kapitału zakładowego: 310.000.000,00 złotych. Zapraszamy do korzystania z aplikacji HELPDESK<https://helpdesk-it/>

5 5

Set Alert Checkers for Billing Module
by Gabriel Cambronero 03 Apr '19

03 Apr '19

Hello There, There is a way that we can link the Billing Module with the Alert Checker? It will be useful if we can send notifications when the customers hits the quote. I look forward to hearing from you. Best Regards, -- [image: https://www.racknation.cr/firma.jpg] * Gabriel Cambronero S* * Infrastructure Manager* * RACKNATION Costa Rica* Email: gcambronero(a)racknation.cr Tel: (506) 4000-2133 Cel: (506) 8813-3048 http://www.RackNation.cr <http://www.racknation.cr/> This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Racknation. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Este mensaje y cualquier archivo adjunto son confidenciales y pueden contener información privilegiada o estar protegidos de alguna forma contra su divulgación. Cualquier punto de vista u opiniones expresadas son exclusivas del autor y no representan necesariamente las de Racknation. Si usted no es el destinatario previsto, no debe copiar este mensaje ni ninguno de sus archivos adjuntos, como tampoco informar sobre su contenido a ninguna otra persona. Si ha recibido esta transmisión por error, rogamos que lo comunique inmediatamente al remitente y elimine de su sistema el mensaje y todos los archivos adjuntos que éste pueda contener.

1 0

IPMI Errors?
by Adam Ward 03 Apr '19

03 Apr '19

Hey Observium Team, I am not sure if IPMI on standard SuperMicro mainboards can be scraped for ECC errors and other SEL-type errors? Am I going to have to ship syslog data somewhere and act on it? We just had a DIMM throwing correctable errors but that doesn’t really show up anywhere in IPMI/SNMP as far as I can see, even after checking the SM MIBs. How do others accomplish similar monitoring? Adam Ward Systems Engineer Shamrock Trading Corporation Office Phone/Fax: (913) 310-2247 Email: award(a)rtsfinancial.com<mailto:award@rtsfinancial.com> Website: www.shamrocktradingcorp.com<http://www.shamrocktradingcorp.com/> This e-mail communication (including any attachments) is intended only for use by the individual or entity named above and is considered confidential. If you are not the intended recipient, or the employee or agent responsible to deliver it to the intended recipient, you should immediately stop reading this message and delete it from your system. Any unauthorized reading, distribution, copying or other use of this communication (or its attachments) is strictly prohibited.

2 4

Apache Vulnerability
by Adam Armstrong 02 Apr '19

02 Apr '19

Seems a lot of people will need to upgrade Apache today. "In Apache HTTP Server 2.4 releases 2.4.17 to 2.4.38, with MPM event, worker or prefork, code executing in less-privileged child processes or threads (including scripts executed by an in-process scripting interpreter) could execute arbitrary code with the privileges of the parent process (usually root) by manipulating the scoreboard. Non-Unix systems are not affected." https://httpd.apache.org/security/vulnerabilities_24.html#CVE-2019-0211 adam. Sent from Mailbird [http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&ut…]

1 0

Low dbm sensor alerts for shutdown interfaces
by Andrew Lemin 31 Mar '19

31 Mar '19

Hi, Has anyone else seen the issue where after enabling an alert checker for transceiver optics with sensor_value greater @sensor_limit and sensor_value less @sensor_limit_low, alerts are still received for shutdown interfaces? For example, on a cisco switch when running ‘show interfaces transceiver detail’, we can see; Optical High Alarm High Warn Low Warn Low Alarm Receive Power Threshold Threshold Threshold Threshold Port (dBm) (dBm) (dBm) (dBm) (dBm) Te1/1/25 -40.0 1.9 -1.0 -9.9 -13.9 Te2/1/1 -40.0 1.9 -1.0 -9.9 -13.9 Etc.. Te1/1/25 admin down down Te2/1/1 admin down down Etc The sensors page shows the correct thresholds etc, but shows the interface in Red (and hence is generating alerts through the checker), rather than grey (as the port is shutdown and has no fibre connected – hence -40dbm.). [cid:image001.png@01D4E0C6.4F698990] The same port on the Ports page does show the interface as being grey/shutdown [cid:image002.png@01D4E0C6.4F698990] Have no idea how to resolve this and stop getting transceiver alerts for shutdown interfaces? This sounds like a potential bug? Thanks, Andy.

5 10

Windows Agent?
by Hamilton, Kent 29 Mar '19

29 Mar '19

I'm curious how hard it will be to add a windows agent like the existing Linux agent. I have written a PowerShell listener that responds on 36602 with the output from whatever scripts are in a specific directory with the data formatted in the expected format for Observium. Currently I have scripts that return the installed packages, ioping, vmwaretools, and working on a few others (IIS, MSSQL, Exchange). I have yet to started looking at the Observium side of things other than glancing at includes/polling/unix_agent.inc.php and a few of the scripts in includes/polling/unix_agent/*. Any help out there for this? ________________________________ This e-mail and any documents accompanying it may contain legally privileged and/or confidential information belonging to Exegy, Inc. Such information may be protected from disclosure by law. The information is intended for use by only the addressee. If you are not the intended recipient, you are hereby notified that any disclosure or use of the information is strictly prohibited. If you have received this e-mail in error, please immediately contact the sender by e-mail or phone regarding instructions for return or destruction and do not use or disclose the content to others.

1 0

Bug Question - UPS Interface Issue
by Adam Ward 28 Mar '19

28 Mar '19

Adam/Team, I have a few new UPS systems that are Eaton 5PX units with their management card. I have others that function fine, but the last two I have installed, the port parsing isn’t working, and every poller run generates a new interface name somehow. See attached image. If I stop polling for the port, the issue goes away. It’s not critical, but I am wondering how to even go about troubleshooting this issue. How do I go about debugging this with support? Open a Jira ticket? Adam Ward Systems Engineer Shamrock Trading Corporation Office Phone/Fax: (913) 310-2247 Email: award(a)rtsfinancial.com<mailto:award@rtsfinancial.com> Website: www.shamrocktradingcorp.com<http://www.shamrocktradingcorp.com/> This e-mail communication (including any attachments) is intended only for use by the individual or entity named above and is considered confidential. If you are not the intended recipient, or the employee or agent responsible to deliver it to the intended recipient, you should immediately stop reading this message and delete it from your system. Any unauthorized reading, distribution, copying or other use of this communication (or its attachments) is strictly prohibited.

1 0

"Draw Error" with Custom OIDs
by Gordon Cheng (gocheng) 28 Mar '19

28 Mar '19

Hi Observium team: We are having Draw Error issue generating graphs from two Custom OIDs (connection counts and translation counts) for Cisco firewalls. These are the two OIDs which are working with snmpwalk: sjc-observium-1:/opt/observium# snmpwalk -v 2c -c '<snipped>' SJC-FW07-INTERNET .1.3.6.1.4.1.9.9.147.1.2.2.2.1.5.40.6 SNMPv2-SMI::enterprises.9.9.147.1.2.2.2.1.5.40.6 = Gauge32: 2521 sjc-observium-1:/opt/observium# snmpwalk -v 2c -c '<snipped>' SJC-FW07-INTERNET .1.3.6.1.4.1.9.10.77.1.2.1.0 SNMPv2-SMI::enterprises.9.10.77.1.2.1.0 = Gauge32: 1349 sjc-observium-1:/opt/observium# Our Observium is currently running 19.1.9656 (rolling) as a troubleshooting step (my colleague has another system and it works for them with 9656). We have the same issue when running 9712 earlier. [cid:image001.png@01D4E4B1.F132CE50] [cid:image002.png@01D4E4B1.F132CE50] [cid:image003.png@01D4E4B1.F132CE50] [cid:image004.png@01D4E4B1.F132CE50] Doesn't seem like there are any error logs: sjc-observium-1:/opt/observium/logs# grep -i xlate_count * sjc-observium-1:/opt/observium/logs# grep -i conn_count * sjc-observium-1:/opt/observium/logs# grep -i "1.3.6.1.4.1.9.9.147.1.2.2.2.1.5.40.6" * sjc-observium-1:/opt/observium/logs# grep -i "1.3.6.1.4.1.9.10.77.1.2.1.0" * sjc-observium-1:/opt/observium/logs# We would like to see if there is any suggestion to further troubleshoot the issue. Any input is greatly appreciated. Thanks. - Gordon

2 2

Re: [Observium] Low dbm sensor alerts for shutdown interfaces
by Adam Ward 28 Mar '19

28 Mar '19

Andrew- I noticed this too, it was like if the SFP was inserted, it’d still throw an error because the transceiver tx/rx limits were technically still out of spec. There needs to be logic to check for the interface status first, then disable the thresholds/alerts if down. I had just considered removing optics for ports that were shut, but kinda annoying for sure. Adam Ward Systems Engineer Shamrock Trading Corporation Office Phone/Fax: (913) 310-2247 Email: award(a)rtsfinancial.com<mailto:award@rtsfinancial.com> Website: www.shamrocktradingcorp.com<http://www.shamrocktradingcorp.com/> From: observium <observium-bounces(a)observium.org> on behalf of Andrew Lemin via observium <observium(a)observium.org> Reply-To: Observium <observium(a)observium.org> Date: Friday, March 22, 2019 at 10:46 AM To: Andrew Lemin via observium <observium(a)observium.org> Cc: Andrew Lemin <AndrewL(a)4d-dc.com> Subject: [Observium] Low dbm sensor alerts for shutdown interfaces Hi, Has anyone else seen the issue where after enabling an alert checker for transceiver optics with sensor_value greater @sensor_limit and sensor_value less @sensor_limit_low, alerts are still received for shutdown interfaces? For example, on a cisco switch when running ‘show interfaces transceiver detail’, we can see; Optical High Alarm High Warn Low Warn Low Alarm Receive Power Threshold Threshold Threshold Threshold Port (dBm) (dBm) (dBm) (dBm) (dBm) Te1/1/25 -40.0 1.9 -1.0 -9.9 -13.9 Te2/1/1 -40.0 1.9 -1.0 -9.9 -13.9 Etc.. Te1/1/25 admin down down Te2/1/1 admin down down Etc The sensors page shows the correct thresholds etc, but shows the interface in Red (and hence is generating alerts through the checker), rather than grey (as the port is shutdown and has no fibre connected – hence -40dbm.). [cid:image001.png@01D4E0C6.4F698990] The same port on the Ports page does show the interface as being grey/shutdown [cid:image002.png@01D4E0C6.4F698990] Have no idea how to resolve this and stop getting transceiver alerts for shutdown interfaces? This sounds like a potential bug? Thanks, Andy. This e-mail communication (including any attachments) is intended only for use by the individual or entity named above and is considered confidential. If you are not the intended recipient, or the employee or agent responsible to deliver it to the intended recipient, you should immediately stop reading this message and delete it from your system. Any unauthorized reading, distribution, copying or other use of this communication (or its attachments) is strictly prohibited.

8 12

ThinClient Wyse detected as "Generic Device"
by Ing. Hugo Rodriguez 28 Mar '19

28 Mar '19

Hi Observium team, Please, I need your help with a issue Description Thinclients Wyse Model Tx0 units are being discovered as a generic device. Output from snmpwalk for the device is attached. Environment Observium CE 18.9.9420 (5th September 2018) OS Linux 4.9.0-8-amd64 [amd64] (Debian 9.6) Apache Apache PHP 7.0.33-0+deb9u3 (OPcache: ENABLED) Python 2.7.13 MySQL 10.1.37-MariaDB-0+deb9u1 (extension: mysqli 5.0.12-dev) SNMP NET-SNMP 5.7.3 RRDtool 1.6.0 Fping 3.15 (IPv4 and IPv6) Thanks Hugo

1 0

Observium Enterprise Multi Poller/Syslog Servers
by Ron Culler 26 Mar '19

26 Mar '19

I know you can set multiple pollers to query the devices but is it possible to also enable syslog on each poller as well? I would like to have multiple syslog servers for load and redundancy. Thanks Ron

3 3

Change device IP?
by Kaiser, Erich 26 Mar '19

26 Mar '19

What is the best way to go about changing the IP I am using to monitor the device without loosing all the graph data?

3 4

Services checking?
by Adam Ward 26 Mar '19

26 Mar '19

Hello, I see the service discovery options and enabled the “services” module. I am not seeing any services on the device like it shows on your site’s screenshots. I’m an enterprise customer. Please let me know if there’s something I am missing, or if there’s more documentation around this functionality. I really need to do basic HTTP checks. I see there was some support at one time using nagious-esque plugins, but I can’t seem to find any references to the code of the actual services checks? I saw it only works for device type “server” but, even on the local OBS, the services module doesn’t really do anything. I desperately need this functionality: http://www.observium.org/images/ss-dev-linux-2x.png I see the queries in the debug logging for the web UI device page, but since the services table doesn’t have any discovered services, I can’t see anything. SELECT COUNT(service_id) FROM `services` WHERE `device_id` = '1' SELECT COUNT(service_id) FROM `services` WHERE `device_id` = '1' AND `service_status` = '1' AND `service_ignore` ='0' SELECT COUNT(service_id) FROM `services` WHERE `device_id` = '1' AND `service_status` = '0' AND `service_ignore` = '0' SELECT COUNT(service_id) FROM `services` WHERE `device_id` = '1' AND `service_ignore` = '1' Here’s the snippet of the debug output for the discovery phase: ##### Module Start: services ##### Services: CMD[/usr/bin/snmpbulkwalk -v2c -c 'MHikJ8dloru_flZ' -Pu -Osqn -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'localhost':'161' .1.3.6.1.2.1.7.5.1.2] CMD EXITCODE[0] CMD RUNTIME[0.0045s] STDOUT[ .1.3.6.1.2.1.7.5.1.2.0.0.0.0.34345 34345 .1.3.6.1.2.1.7.5.1.2.0.0.0.0.36227 36227 .1.3.6.1.2.1.7.5.1.2.0.0.0.0.42326 42326 .1.3.6.1.2.1.7.5.1.2.0.0.0.0.44522 44522 .1.3.6.1.2.1.7.5.1.2.0.0.0.0.45104 45104 .1.3.6.1.2.1.7.5.1.2.0.0.0.0.45205 45205 .1.3.6.1.2.1.7.5.1.2.0.0.0.0.46519 46519 .1.3.6.1.2.1.7.5.1.2.0.0.0.0.48629 48629 .1.3.6.1.2.1.7.5.1.2.0.0.0.0.48831 48831 .1.3.6.1.2.1.7.5.1.2.0.0.0.0.50874 50874 .1.3.6.1.2.1.7.5.1.2.0.0.0.0.52511 52511 .1.3.6.1.2.1.7.5.1.2.0.0.0.0.53048 53048 .1.3.6.1.2.1.7.5.1.2.0.0.0.0.54029 54029 .1.3.6.1.2.1.7.5.1.2.0.0.0.0.54891 54891 .1.3.6.1.2.1.7.5.1.2.0.0.0.0.57027 57027 .1.3.6.1.2.1.7.5.1.2.0.0.0.0.58503 58503 .1.3.6.1.2.1.7.5.1.2.0.0.0.0.60052 60052 .1.3.6.1.2.1.7.5.1.2.10.2.2.70.68 68 .1.3.6.1.2.1.7.5.1.2.127.0.0.1.161 161 .1.3.6.1.2.1.7.5.1.2.127.0.0.53.53 53 ] SNMP STATUS[TRUE] o Duration 0.0059s Adam Ward Systems Engineer Shamrock Trading Corporation Office Phone/Fax: (913) 310-2247 Email: award(a)rtsfinancial.com<mailto:award@rtsfinancial.com> Website: www.shamrocktradingcorp.com<http://www.shamrocktradingcorp.com/> This e-mail communication (including any attachments) is intended only for use by the individual or entity named above and is considered confidential. If you are not the intended recipient, or the employee or agent responsible to deliver it to the intended recipient, you should immediately stop reading this message and delete it from your system. Any unauthorized reading, distribution, copying or other use of this communication (or its attachments) is strictly prohibited.

4 4

Alerts based on Juniper FW counters
by Jason Lixfeld 25 Mar '19

25 Mar '19

Hello, Using Observium Professional, svn up’d today. For Juniper MX, the Firewall tab graphs firewall filters, policers, etc., however I can’t seem to find a way to create alerts based on any of those values. Am I missing it somewhere or is that not supported? Specifically I’m looking to be alerted when there is a policer violation. Thanks in advance.

1 0

Vendor & Hardware Changes in event log
by mal＠platinumnetworks.com.au 25 Mar '19

25 Mar '19

I am constantly seeing updates in the event log telling me that the Vendor and Hardware details have been ‘changed’. It looks like this is happening for all devices even though none of those details have actually changed. I’d like to monitor the event log for things that actually happen 😊. Do I need to change anything to exclude these warnings about non-existent changes? FYI I’m running 19.3.9774 Cheers Mal

2 3

How to configure "Entity Association Ruleset" section of Alert checker for Device = * and Entity = *
by Andrew Lemin 22 Mar '19

22 Mar '19

Hi, Some time ago when creating Alert Checkers, the “Device Match” and “Entity Match” fields were freeform logic statements, which allowed you to enter complex logic or just the * wildcard to match all; [cid:image001.png@01D4E0AD.B7B51910] We want to create a new generic Sensor based Alert Checker as per the examples in; https://github.com/mgmoerman/docs/blob/master/observium-alert-checkers.md Alert Entity type Check Conditions Check Conditions boolean Device match Entity match State sensor is in ALERT state! Status status_event = alert status_event = warning ANY * * However, the new Alert Checker section no longer allows freeform “Device Match” and “Entity Match” fields, and instead provides a new “Entity Association Ruleset” section providing a logic builder for the Entity Match (which is very helpful), however we cannot figure out how to encode wildcards/* to match all for the Devices and Entities using the new editor? [cid:image002.png@01D4E0AD.B7B51910] Thanks, Andy.

1 0

Limit device information to normal user
by Fiberwide Sysadmins 21 Mar '19

21 Mar '19

Hi all, do You know if there is a way to not show the device info to a normal user? I want to give access to our customer to the statistics graphs of their lines, but i don't want to let the user know on which hardware is this line and the other info like the operative system, uptime, last reboot... Just the graphs of the ports I enabled to that user, nothing more. Distinti saluti --- Davide Lima Daum - Tech Lead Fibering S.p.a. - www.fiberwide.com T: +39.02.00632100 F: +39.02.00632199 e: sysadmin(a)fiberwide.com

1 0

Quick Questions
by Adam Ward 21 Mar '19

21 Mar '19

Hey All, I know these questions have probably been asked a lot, but after searching the answers weren’t really clear. Can you please help me build a case to pay for the software? ☺ - Observium seems to support graphing application metrics, but I don't see any entity types for applications to key on in alert checkers. Is there any way to make the metrics available to the alert checkers? (Found a post about this but it was 4 years ago) - Can I use smokeping port checks to cover service checks (i.e. simple TCP connection tests) or can I key (alert) on the smokeping metrics? - If we purchase the full version, which includes custom SNMP OID's, can I also alert on the custom OID data? I have scripts that currently do this with our other monitoring software. - If we purchase enterprise support, will we be able to see a better road map or any other improvements coming down the pipe? Overall, this product will replace all our infra monitoring for devices that it supports, if we can add a little additional functionality, we can probably get rid of more tools here! ☺ Adam Ward Systems Engineer Shamrock Trading Corporation Office Phone/Fax: (913) 310-2247 Email: award(a)rtsfinancial.com<mailto:award@rtsfinancial.com> Website: www.shamrocktradingcorp.com<http://www.shamrocktradingcorp.com/> This e-mail communication (including any attachments) is intended only for use by the individual or entity named above and is considered confidential. If you are not the intended recipient, or the employee or agent responsible to deliver it to the intended recipient, you should immediately stop reading this message and delete it from your system. Any unauthorized reading, distribution, copying or other use of this communication (or its attachments) is strictly prohibited.

1 0