- observium - lists.observium.org

CDR Overage Alerts
by Andrew Lemin 04 Feb '19

04 Feb '19

Hi List, I know there has been a long-time request to enable the ability to generate an Alert when traffic (peak or 95%) goes over the CDR (as configured within [CDR] on the interface), and we would like to know if this has been realised yet? We just need a way of dynamically detecting and reporting when traffic goes over the configured CDR, using the port description’s [CDR] value. We cannot create Observium billing reports for every single customer facing port as we have thousands, and we are trying to keep manual processes to a minimum as this could easily be a generic alert of the form; ifInUcastPkts_rate > CDR OR ifOutUcastPkts_rate > CDR I believe historically there was some outstanding work to convert the discovered [CDR] field data into a normalised bps value in the database (as CDR can be given in units of Bits/Megabits/Gigabits etc). Thanks, Andy.

1 0

subscription to community
by Michael Medwid 01 Feb '19

01 Feb '19

Can you switch from the subscription version of observium to the community version by following the Upgrade to latest Major release procedure? Community Edition¶ Upgrade to latest Major release¶ Disable observium cronjobs optional Run the following commands (as root): cd /opt mv observium observium_old wget -Oobservium-community-latest.tar.gz http://www.observium.org/observium-community-latest.tar.gz tar zxvf observium-community-latest.tar.gz mv /opt/observium_old/rrd observium/ mv /opt/observium_old/logs observium/ mv /opt/observium_old/config.php observium/ Update DB schema: /opt/observium/discovery.php -u If it has been a very long time since you've updated (12 months or more), you may want to force an immediate rediscovery of all devices to make sure things are up to date : /opt/observium/discovery.php -h all Re-enable observium cronjobs optional You may now delete your observium_old directory if everything has updated correctly: rm -rf observium_old

2 1

Re: [Observium] Starline Busway Monitoring
by David Ross 31 Jan '19

31 Jan '19

Hello again, Adam! The attached file contains two -Obentu format snmpwalks for the Skyline Busway CPM. Please let me know if this walk isn't the correct format. Regards, *David W. Ross, Sr.* Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross(a)salesforce.com <http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html> On Thu, Jan 3, 2019 at 3:06 AM Adam Armstrong <adama(a)memetic.org> wrote: > Hi, > > These walks are not quite in the correct format, they need to be made > with -ObentU > > It does look like there are a bunch of sensors and stuff in there, but I > can't tell what they are easily in that format. :) > > adam. > > > On 2019-01-02 21:11, David Ross wrote: > > Hello, Adam! > > > > About a month ago, I sent you snmpwalks for the Starline Critical > > Power Meter (CPM), hoping that Observium support for Starline could be > > added. Has any progress been made with developing code base? Any > > update would be appreciated. > > > > Regards, > > > > David W. Ross, Sr. > > Sr. Lab Ops Engineer > > > > 50 Fremont St, 42nd Floor > > > > San Francisco, California 94105 > > > > 415.589.4930 - O > > > > 415.926.3483 - C > > david.ross(a)salesforce.com > > > > [1] > > > > On Mon, Dec 3, 2018 at 10:17 AM David Ross <david.ross(a)salesforce.com> > > wrote: > > > >> Hello, Adam! > >> > >> Within the attached text file are the two Starline snmpwalks. Pleas > >> let me know if there is additional information needed. > >> > >> Regards, > >> > >> David W. Ross, Sr. > >> Sr. Lab Ops Engineer > >> > >> 50 Fremont St, 42nd Floor > >> > >> San Francisco, California 94105 > >> > >> 415.589.4930 - O > >> > >> 415.926.3483 - C > >> david.ross(a)salesforce.com > >> > >> [1] > >> > >> On Sun, Dec 2, 2018 at 4:51 PM Adam Armstrong via observium > >> <observium(a)observium.org> wrote: > >> > >> See the walk commands in the previous mail :> > >> > >> adam. > >> > >> On 2018-12-02 20:19:49, Darrell Budic via observium > >> <observium(a)observium.org> wrote: > >> > >> I’m monitoring mine with some custom OIDs, works for what I need. > >> Would be nice to have them fully supported, I can provide sample > >> data if it helps someone set that up. > >> > >> -Darrell > >> > >> On Nov 30, 2018, at 4:22 PM, Adam Armstrong via observium > >> <observium(a)observium.org> wrote: > >> > >> Hi, > >> > >> It's not actually possible to just add mibs to a directory. You need > >> to write definition arrays and/or code to support that mib. > >> > >> Adam. > >> > >> Sent from BlueMail [2] > >> On 30 Nov 2018, at 19:43, David Ross via observium > >> <observium(a)observium.org> wrote: > >> > >> Hello! > >> > >> I sent this question yesterday but got no response. Please reply as > >> soon as possible. > >> > >> I've added monitoring to our Starline Busway CPMs (Critical Power > >> Meters) and have added latest MIB to the Observium SNMP MIBs > >> directory. However, I get very little to no monitoring data. Is > >> the Starline MIB not supported by Observium? Please advise; thanks! > >> > >> Regards, > >> > >> David W. Ross, Sr. > >> Sr. Lab Ops Engineer > >> > >> 50 Fremont St, 42nd Floor > >> > >> San Francisco, California 94105 > >> > >> 415.589.4930 - O > >> > >> 415.926.3483 - C > >> david.ross(a)salesforce.com > >> > >> [1] > >> > >> ------------------------- > >> > >> observium mailing list > >> observium(a)observium.org > >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >> > >> _______________________________________________ > >> observium mailing list > >> observium(a)observium.org > >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > > _______________________________________________ > > observium mailing list > > observium(a)observium.org > > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > > > > Links: > > ------ > > [1] http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html > > [2] http://www.bluemail.me/r?b=14063 >

2 12

Manage Output Value of custom OID
by walter＠onda.ch 31 Jan '19

31 Jan '19

Hello I'm happy to using Observium and its Custom OID. Eveything is working fine. My question is the presentation of the values to the web. Is it possible to manipulate just for the presentation the collecte values? For example wie collect the SNR (Signal to noise) from the CMTS, this value has 3 digits like 325 in the RRD. Now for the human I would like to change it to 32.5 in the grafic. Is it possible? If not, would it be a nice features? Regards Walter

1 0

Port label parsing - Mikrotik possible bug?
by Lyndon Labuschagne 31 Jan '19

31 Jan '19

Hi I have picked up that the port cable parsing does not seem to work on Mikrotik routers, a port description of Core: sfp-sfpplus1- Trunk to 6509 becomes CoreCore: sfp-sfpplus1- Trunk to 6509 An SNMP walk gives be the below iso.3.6.1.2.1.2.2.1.2.1 = STRING: "Core: sfp-sfpplus1- Trunk to 6509" iso.3.6.1.2.1.31.1.1.1.1.1 = STRING: "Core: sfp-sfpplus1- Trunk to 6509" iso.3.6.1.2.1.55.1.5.1.2.1 = STRING: "Core: sfp-sfpplus1- Trunk to 6509” If I run a poller on the device, the “Descr” under the sensors display shows the correct "Core: sfp-sfpplus1- Trunk to 6509” but later on under the ifIndex listing the Label there is CoreCore: sfp-sfpplus1- Trunk to 6509 Regards

4 14

When trying to upgrade observium I'm prompted for a root pw
by Michael Medwid 29 Jan '19

29 Jan '19

[juser@observium logs]$ sudo svn update [sudo] password for juser: Updating '.': Authentication realm: <http://svn.observium.org:80> Observium Professional Repository Password for 'root': Looking through our password vault I don't see a "root" user for observium upgrades. I do see another user ID labeled "Observium SVC" and the original system owner noted "used for upgrades". But as the only instruction for the upgrade is "svn update", it's not clear to me where this other username would come into play. Looking through the observium update doc I don't see any reference to being prompted for a root password nor an alternate svn user. Insight appreciated. Thanks, Michael

3 2

Database errors insert
by Michael Medwid 29 Jan '19

29 Jan '19

Mariadb Errors such as the one below are filling up db.log to the tune of 10GB per day. There's plenty of disk space. Any suggestions on how to correct this? [2019/01/26 15:14:11 -0800] poller.php(156776): Failed dbQuery (#1114 - The table 'ports_cbqos' is full), Query: INSERT INTO `ports_cbqos` (`device_id`,`port_id`,`policy_index `,`object_index`,`direction`,`PrePolicyPkt`, `PrePolicyByte`,`PostPolicyByte`,`DropPkt`,`DropByte`,`NoBufDropPkt`) VALUES ('132','11977','301990276','301990277','output','0','0','0','0','0','')

2 1

Geolocation is broken?
by Tommy Nevtelen 29 Jan '19

29 Jan '19

Hi When I clear geolocation for a device openstreetmap shows not found and it places it to the default in the middle of the Atlantic. Now for some reason all our stuff is being placed there. This also means that most devices are in Unknown in the Devices-> Location menu. But if I take the API request and clean it up, remove *** and amp; stuff it gives the correct answer, see the second screenshot. The url requested for this is: https://nominatim.openstreetmap.org/search?format=json&accept-language=en&a… Running the latest pro version from trunk but had the issue before, just upgraded to see if it would go away. /T

1 1

update seems to be failing
by O'Connor, Gerry 25 Jan '19

25 Jan '19

Hi, We have the Professional Subscription running on Ubunto 16.4.1 64 bit version. I am trying to upgrade from v9662 to 9684. I can't find any errors in the logs. Any thought on what I could be missing would be appreciated. When I run the update procedure, I get the following: root@bobservium:/opt/observium# svn update Updating '.': At revision 9684. root@bobservium:/opt/observium# Here is the Version info from the GUI: Version Information Observium 19.1.9661 (6th January 2019) OS Linux 4.13.0-41-generic [amd64] (Ubuntu 16.04) Apache 2.4.18 (Ubuntu) PHP 7.0.30-0ubuntu0.16.04.1 (OPcache: ENABLED) Python 2.7.12 MySQL 5.7.22-0ubuntu0.16.04.1 (extension: mysqli 5.0.12-dev) SNMP NET-SNMP 5.7.3 RRDtool 1.5.5 Fping 3.13 (IPv4 and IPv6) As you can see the GUI version is still the old version. I killed the browser and checked again, same version number, Thanks Gerry O'Connor Arris Group 630-281-3057

4 3

svn update issue
by John Dicks 25 Jan '19

25 Jan '19

Hi all. I have an issue running svn update. My system details below. What happens is I get 'GET request returned unexpected delta base' or less commonly a checksum mismatch'. I then revert to my saved snapshot of the VM and start again. Each time it fails at a different part. We are 588 rev's behind so I attempted to svn update -r 9217 which I believe is only one version ahead of where we are. Hoping that with fewer committed changes it would make it through. Same error though. Does anyone have any thing for me to try. I have not seen anyone else online with this issue? Thanks a LOT! Vsphere 6.5 VM Debian GNU/Linux 8 \n \1 Observium 18.3.9073 (stable)<http://www.observium.org/> Observium Professional License Version 1.1 Running Svn cleanup Svn update The svn update will get to a random spot before hitting me with a 'GET request returned unexpected delta base' or less commonly a checksum mismatch' [cid:image001.jpg@01D4B496.7B724F10] [cid:image002.jpg@01D4B496.7B724F10] [cid:image003.jpg@01D4B496.7B724F10] [cid:image004.jpg@01D4B496.7B724F10] [cid:image005.jpg@01D4B496.7B724F10] John Dicks IT Engineer NewPort Tank Containers NAM / SAM 1340 Depot St. Cleveland, OH 44116 United States Direct: +1 440 356 8866 Ext: 1119 Mobile: +1 330 687 7847 John.Dicks(a)newporttank.com<mailto:John.Dicks@newporttank.com> www.newporttank.com<http://www.newporttank.com> This email is intended only for the person to whom it is addressed and/or otherwise authorized personnel. The information contained herein and attached is confidential and the property of Newport. If you are not the intended recipient, please be advised that viewing this message and any attachments, as well as copying, forwarding, printing, and disseminating any information related to this email is prohibited, and that you should not take any action based on the content of this email and/or its attachments. If you received this message in error, please contact the sender and destroy all copies of this email and any attachment. Please note that the views and opinions expressed herein are solely those of the author and do not necessarily reflect those of the company. While antivirus protection tools have been employed, you should check this email and attachments for the presence of viruses. No warranties or assurances are made in relation to the safety and content of this email and attachments. Newport accepts no liability for any damage caused by any virus transmitted by or contained in this email and attachments. No liability is accepted for any consequences arising from this email.

2 1

Power graph aggregation
by Brandwatch NOC 25 Jan '19

25 Jan '19

Hi, Does anyone have experience of creating aggregated graphs for power? Basically I would like to combine power graphs to get a view of power across aisles in a similar way to how we can aggregate ports for traffic accounting. Thanks for any thoughts. Chris -- Chris Tomkins Brandwatch | Senior Network Engineer (Linux/Network) christ(a)brandwatch.com | (+44) 01273 448 949 @Brandwatch New York | San Francisco | Brighton | Singapore | Berlin | Stuttgart Discover how organizations are using Brandwatch to create their own success <https://www.brandwatch.com/customer-success/> Email disclaimer <http://www.brandwatch.com/email-disclaimer/> [image: bw-signature logo.png]

2 2

Can you manually re-run conversion of old front page to new? No minigraphs left...
by Henrik Cednert (Filmlance) 25 Jan '19

25 Jan '19

Hello Had totally missed that there was a new front page/dash board. So was sort of chocked when running the upgrade and I lost all my minigraphs. Is it normal that the minigraphs isn’t carried over? Can I EASILY read that line in coinfig.php and have a new dashboard created from it? Sorry if there’s a thread about this, read back a few month but couldn’t find anything exactly like this. Please point me to it if there are one or more threads. Cheers and thanks -- Henrik Cednert / + 46 704 71 89 54 / CTO / Filmlance Disclaimer, the hideous bs disclaimer at the bottom is forced, sorry. ¯\_(ツ)_/¯ Disclaimer The information contained in this communication from the sender is confidential. It is intended solely for use by the recipient and others authorized to receive it. If you are not the recipient, you are hereby notified that any disclosure, copying, distribution or taking action in relation of the contents of this information is strictly prohibited and may be unlawful.

3 13

IPv6 Traffic Statistics Alert for Interfaces
by Klimek, Denis 25 Jan '19

25 Jan '19

Hi all, I tried to create an alert for IPv6 Traffic from a interface which is able to display such traffic. There is also a RRD graph for it, but I can not find any values in the database. Would it be possible to add those so that a Alert Rule can be created? Mit freundlichem Gruß Stadtwerke Norderstedt Denis Klimek Professional Network Engineer IP-Systemtechnik Tel: 040 / 521 04 - 1049 Mobil: 0151 / 652 219 06 dklimek(a)stadtwerke-norderstedt.de<mailto:dklimek@stadtwerke-norderstedt.de> www.stadtwerke-norderstedt.de<http://www.stadtwerke-norderstedt.de/>

1 0

Cisco Umbrella VA Monitoring
by Benjamin Moore 24 Jan '19

24 Jan '19

Any chance we can get the following to monitor Cisco Umbrella Virtual Appliances via Observium? Here are the necessary mibs - https://docs.umbrella.com/deployment-umbrella/docs/appendix-c-enable-snmp-m… I can send an SNMPwalk of appliances if needed. Thanks!

2 2

Observium Enterprise
by Joelly, Alexander 24 Jan '19

24 Jan '19

Hello, Our company is split into two major regions (EU & NA) where we have a central datacenter in each region, all sites in the particular region is connected to it's regional datacenter and the two datacenters are red. connected together. As I understand with the enterprise version multiple pollers can be deployed within the topology to scale vertically where in our scenario we would place them in our datacenters as everything is reachable from there (DC and WAN equippement on remote sites). How would we monitor both regions? Our concern is that the latency between the datacenters (~120ms) could cause some issues and might slow in response if the gui,rrd and mysql servers are hosted in one region. Can the rrd and mysql servers deployed redundant - one node in EU and the second in NA and also each region a local gui instance? Or is it possible to run a separate instance in each region and have a common gui with visibility of all devices? We possibly might also monitor the LAN equipment of the sites in the future - that might add a couple of thousands devices per region (no real numbers known yet) We have a network team and service desk in each region, where we have about 1.500 datacenter and WAN devices in each region to monitor in the first step - we are calculating to have around 30 people from each region using the gui daily. Does someone have such a setup? We setup the CE for testing and we would go ahead using it globally, but not sure how the setup should/would like for that and we haven't found anything in that direction... Thanks, Alex

2 1

Cisco DCM
by Kamil Wojtas 24 Jan '19

24 Jan '19

Are there any plans for monitoring Cisco DCM 9900/9902 devices?

2 1

Alert Checker not picking up newly added switches
by Sam Jones 23 Jan '19

23 Jan '19

Observium, I had to do a manual rebuild of Alert Checkers to add new devices. These devices are newly added in the last 6 months. Is this expected behaviour and if so can I automate a rebuild of the Alert Checkers as I don't want to have to remember to click the rebuild button every month/week/day? Sam

2 2

Tp-link switch showing no stats even tho debug shows stats?
by Simon Mousey Smith 23 Jan '19

23 Jan '19

Hi All, Im trying to work out if the is something wrong with my switch or observium? Observium detects all the ports fine, vlans fine, But its not showing any traffic on the ports? And when I run the -dd in the poller.php the output shows that the is traffic on the ports? Attached is the debug and a screenshot showing the ports in observium Regards Simon

4 13

Poseidon2 4002 dry contact check
by Laszlo Nemeth 23 Jan '19

23 Jan '19

Hi All, We have some new HWGroup - Poseidon 24002 devices with dry contacts (digital) connected to door sensor in our racks and some temperature sensors. Our current Observium (r9667) can see the temperature sensors but not the dry contact. There is any way to get the status of the contacts? It would be nice to do alerts if somebody open the rack cabinets. Thanks! Br Laszlo -- László Németh Senior Network Engineer [emarsys]<http://www.emarsys.com/> Emarsys-Technologies Kft Kossuth Lajos utca 7-9. II. emelet 1053 Budapest T: +36 1 781 6001<tel:+36%201%20781%206001> E: laszlo.nemeth(a)emarsys.com<mailto:laszlo.nemeth@emarsys.com> W: www.emarsys.com<http://www.emarsys.com> » Get the latest insight from Emarsys<http://emarsys.com/en/resources/whitepapers/> This email and any attachments contain confidential information for the intended recipient to which it has been addressed. This information may not be copied nor disclosed to any third party without prior permission of the sender. If you are not the intended recipient, or if received in error, please contact the sender immediately and delete this email from your system. emarsys eMarketing Systems AG does not accept responsibility for losses and any other damages resulting from information, including viruses and other harmful content, contained in this email and any attachments.

1 0

Alert message in event log
by Ming Wong, CLSA 22 Jan '19

22 Jan '19

Hi team, I am running Observium Professional 18.10.9472. An alert check has been created for monitoring high CPU. The Default Notifier (email) works fine, but there is no alert message in the Observium event log. In Device Property -> Alert Settings, I have the option to choose "Disable alerts -Don't send alert emails (but write to eventlog)". When enabled and threshold is reached, there is no alert message in the event log either. How can event logging for alarms be enabled ? Thanks for advice. Ming The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. Please consider before printing. CLSA is ISO14001 certified and committed to reducing its impact on the environment.

2 1

SLA polling
by Andre.Punt＠kpn.com 21 Jan '19

21 Jan '19

Hi, I have an old server running observium and am busy migrating to a new server. Currently running into the following problem: ##### Module Start: sla ##### o CISCO-RTTMON-MIB CMD[/usr/bin/snmpbulkwalk -Cr'100' -t '1' -r '5' -v2c -c *** -Pu -OQUs -m CISCO-RTTMON-MIB -M /appl/observium/mibs/rfc:/appl/observium/mibs/net-snmp 'udp':'host':'161' rttMonCtrl] CMD EXITCODE[1] CMD RUNTIME[0.0451s] STDOUT[ ] STDERR[ MIB search path: /appl/observium/mibs/rfc:/appl/observium/mibs/net-snmp Cannot find module (CISCO-RTTMON-MIB): At line 1 in (none) rttMonCtrl: Unknown Object Identifier (Sub-id not found: (top) -> rttMonCtrl) ] SNMP STATUS[FALSE] SNMP ERROR[#996 - MIB or oid not found] Updated this morning (r9661) but still the same problem Base install is in /appl/observium The MIB is present in the path: /appl/observium/mibs/cisco/CISCO-RTTMON-MIB Any ideas where to start looking to solve this? (also had the problem in r9472 and in r8959 but worked before that) Regards, André

4 7

Hard Drive Alert Checking
by Benjamin Moore 18 Jan '19

18 Jan '19

I've got a condition where one of the hard drives in my Cisco C240 chassis failed. Is there a way to build an alert checker to check on the status of drives in a server?

3 6

Disabling redundancy/stack metrics for standalone Cisco switch
by Peter Watts 18 Jan '19

18 Jan '19

Hello, I have commissioned a few new Cisco 3650 switches (WS-C3650-24TD-L) which are stacking-capable, but I have them running standalone. They're on IOS XE 16.6.5 and Observium is detecting/reporting the redundancy attributes for these switches but because they're not stacked, I'm getting an alert for 'nonRedundant'. cRFCfgRedundancyOperMode = 1 Is there a way I can force Observium to ignore the redundancy metrics for these switches? I tried disabling CISCO-RF-MIB on the device but it still persists and when I run './poller.php -h my3650switch -m status' I see the redundancy attributes coming through (assumed I shouldn't? not sure). Observium 19.1.9673 EB Games | ZiNG Pop Culture | Peter Watts | Infrastructure Supervisor | Australia & New Zealand | Peter.Watts(a)ebgames.com<mailto:Peter.Watts@ebgames.com> | +61 7 3860 7757 | 0438 636 110

2 4

Dashboard: Syslog-Widget Filter
by Wiethoff, Helge 17 Jan '19

17 Jan '19

Hi, since the introduction of the new dashboard, the filtered display of the syslog-entries no longer works. Previously (TM) it could be configured in config.php: $config['frontpage']['syslog']['priority'] = array(0,1,2,3); Is it possible that it will work again? Cheers Helge

2 1

Non working pop-ups on new dashboard
by Kamil Wojtas 16 Jan '19

16 Jan '19

Hello, I have just migrate from CE 18.9.1 to Professional 19.1.9661 (stable) a I have problem with non working pop-ups on main page (new dashboard with widgets). In rest of environment are pop-ups working correctly. I tried switch to rolling (unstable) version, but the problem had persisted. In source code I can see missing mouseover events for all items. Is it a bug? Thank you. Kamil

4 4