- observium - lists.observium.org

Searching Issue using Normal user account
by Andres 26 Nov '18

26 Nov '18

Hi Guys, After updated to the last version, I have a issue when I do a port seach using a Normal Account. In older versions i could seach for an interface port description but not now. I realize that it is only possible if I add Ports individually, but not if I only add devices. Any Suggestions? [image: image.png]

1 0

No neighbours shown for Edgeos Devices
by Henry Möller 22 Nov '18

22 Nov '18

3 4

A general questions on apps vs sniped extend ?
by Jonas Karlsson 22 Nov '18

22 Nov '18

Hi, I am new to observium and I am trying to learn the "system". Last week I developed a "app" that shows some status. The client side was super simple but it was somewhat cumbersome on the serverside (find all files to update and definitions etc). This week I tried to use snmpd extend to display the same information. This was super simple both on the client and on the server side (adda custom oid) and it works with alerts! My question is therefore in what circumstances are the "apps" useful? At least for my simple example I did not find any benefits of apps over using snmpd extend and a custom OID. Specially as configuring an app is more cumbersome (on the server side). -- Jonas Karlsson Senior Research Engineer Karlstad University SE-651 88 Karlstad, Sweden 📞 +46 54 700 15 64 📞 +46 70 672 06 20 💬 karlsson.karl.jonas 🗝 0x88765911B284F3A6

2 1

Observium doesn`t shows cbqos module
by Jan Horacek 21 Nov '18

21 Nov '18

Hi guys, I don`t know what`s happened but observium stopped shows flags like CBQOS and if I search for it I don`t see any port marked as CBQOS. nor IPv4, etc... If I`ll do discovery or poller for module cisco-cbqos I`m receiving data from device, just webinterface doesn`t show them. Do you know where could be an issue and how to fix? Thanks Jan

2 9

db error
by Tim Schmidt 20 Nov '18

20 Nov '18

For some reason, I've started receiving "DB Error 2002: No such file or directory" on my Observium installation. Weird thing was that it was literally right in the middle of using the web interface when the error started popping. I've restarted the VM and checked disk space and all looks good. root@tcgobs /opt/observium# ./discovery.php -h none MIB search path: /opt/observium/mibs Cannot find module (LM-SENSORS-MIB): At line 0 in (none) DB Error 2002: No such file or directory Ran the above command line discovery and got this. Not sure what's going on. Any help would be appreciated. Thanks. Tim

2 1

Alert checkers on apps?
by Jonas Karlsson 20 Nov '18

20 Nov '18

Hi, Sorry for a possible noob question but is it possible to create alerts on values reported by the applications system? -- Jonas Karlsson Senior Research Engineer Karlstad University SE-651 88 Karlstad, Sweden 📞 +46 54 700 15 64 📞 +46 70 672 06 20 💬 karlsson.karl.jonas 🗝 0x88765911B284F3A6

1 0

Dashboards
by David Jesus Maturano Sanchez 19 Nov '18

19 Nov '18

Guys. Should the dashboard functionalityworking right now? When I click in any of them, it simply does’t do anything, and obviously doesn’t show anything. Please kindly let me know. Regards. David.

4 14

Contact for Device Type
by noclab 19 Nov '18

19 Nov '18

Hello, Is it possible to add a contact, to get emails only for specific type devices listed under Power? Thanks in advanced Br José

1 0

Custom Names for Graphs in Custom Dashboards
by Pieter De Wit 16 Nov '18

16 Nov '18

Hi Guys, Would it be possible to rename the graphs in the custom dashboard - We have longish names and only the hostname is visible. *Kind Regards,* *Pieter De Wit*

3 5

Using port group in Alerts
by Thibault Richard 16 Nov '18

16 Nov '18

Hello, I've defined a working group of ports which indeed contains what I want : Unfortunately I cannot use this group in an alert definition because I 'm able to define a DEVICE group but not a PORT group The only solution to achieve my goal is to define alerts with the same criterium as the ones used for my group definition Did I miss something ? Best Regards Thibault

3 7

Overall traffic views empty
by Brandwatch NOC 16 Nov '18

16 Nov '18

Hi, Since the update on Tuesday the overall traffic graphs on our front page are empty i.e. Transit & Peering. I tried updating yesterday but no change. Would appreciate a fix, or a clue to the fix ;-) Version Information *Observium* 18.11.9602 (14th November 2018) *OS* Linux 3.16.0-7-amd64 [amd64] (Debian 8.11) *Apache* 2.4.10 (Debian) *PHP* 5.6.38-0+deb8u1 (OPcache: ENABLED) *Python* 2.7.9 *MySQL* 5.5.60-0+deb8u1 (extension: mysqli 5.5.60) *SNMP* NET-SNMP 5.7.2.1 *RRDtool* 1.6.0 *Fping* 3.10 (IPv4 and IPv6) Regards, *Kevin Gee* Brandwatch | Network Engineer network-admin(a)brandwatch.com <kevin(a)brandwatch.com> New York | San Francisco | *Brighton* | Berlin | Stuttgart Email disclaimer <http://www.google.com/url?q=http://www.brandwatch.com/email-disclaimer/&sa=…> Find out what it’s like to work at Brandwatch <http://www.google.com/url?q=http://www.glassdoor.co.uk/Reviews/Brandwatch-R…>

2 1

Observium stop showing pages
by Jan Horacek 16 Nov '18

16 Nov '18

Hi guys, I really need your help. Observium (latest version) stopped to show all sub pages from day to day. I can login into and I see dashboard. On dashboard I`m able to see all graphs and also weather maps are working fine. However if I try open any device or port to see details I`m getting error Not Found The requested URL /health/metric=current/ was not found on this server. Apache configuration didn`t changed at all. Any ideas ? Thanks Jan

2 2

No "mouse-over" on dashboard elements
by Silvio del Val Hinojal 14 Nov '18

14 Nov '18

Hello, "Mouse-over" function over machine names in dashboard doesn't work, I supposse this is correct by now? It works when I click on a machine name, status, alert or whatever and I pass mouse over any element in the screen, showing a floating window with corresponding statistics. This is to confirm this behaviour is right and I don't have anything misconfigured. Regards, Silvio [cid:image001.png@01D03B1C.E8E96F80]<http://www.pandasecurity.com/spain/> Silvio del Val Systems Engineer - Panda Security This e-mail contains confidential information owned by Panda Security. Any such copy, or use, or distribution or disclosure of its contents is strictly forbidden. Please notify us immediately at our phone number (+34 94 425 11 00) if you receive this e-mail and are not its consignee, and then delete this message from your system without copying it, distributing it, or disclosing its contents P Before printing this message, please make sure it is really necessary

2 3

Error in drawing firewall graph
by pierremarie.cossey＠orange.com 14 Nov '18

14 Nov '18

hello I've just updated in 9600 version to use firewall counters on JunOS. It appears a drawing error with specific message : Could not parse color in ''. Thanks for your help Pierre-Marie COSSEY Envoyé de mon Galaxy S8 Orange [firewall_juniper_draw_error.png] _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you.

2 4

Poller wrapper stopped working with Rev 9600
by Andre 14 Nov '18

14 Nov '18

Hi all The poller-wrapper stopped working with Revision 9600. It showed me a problem connecting to database. Reverting to Revision 9599 worked. Best regards Andre

3 10

Alerting on Custom OID
by Pieter De Wit 14 Nov '18

14 Nov '18

Hi Guys, I am trying to build an alert for a value of a custom oid but I seem to be missing something - blame lack of coffee/sleep etc :) The OID is .1.3.6.1.4.1.13400.3.4.4041.1.1.2.1 and I would like to alert when it's below 300. I have created an Alert checker that has a test condition of the following: .1.3.6.1.4.1.13400.3.4.4041.1.1.2.1 lt 300 This doesn't appear to work as it always "OK" the alert even thou the value is +-230. I have even tried "AC Input 1 Voltage" lt 300 without luck. The name comes from the oid_name field in the oids table. How do you create an alert for a custom oid and how do I know what I can alert on, using a custom oid ? *Kind Regards,* *Pieter De Wit*

3 8

Observium updated: 0.SVN.ERROR -> 0.SVN.ERROR
by Jason La 13 Nov '18

13 Nov '18

To all experienced Observium admin, I'm new to Observium and just get the software installed few days ago, I used SVN initially to download and still able to run svn update from the CLI, however, my GUI is not reflect that and keep throwing this SVN.ERROR. Is there anything I miss or any recommendation? Thank you so much in advance. There is a newer revision of Observium available! Version 18.10.9472 (12th November 2018) is 9472 revisions ahead. Version Information Observium 0.SVN.ERROR (1st January 1970) OS Linux 3.10.0-862.14.4.el7.x86_64 [amd64] (RedHat 7.5) Apache 2.4.6 (Red Hat Enterprise Linux) PHP/7.0.32 PHP 7.0.32 (OPcache: ENABLED) Python 2.7.5 MySQL 5.5.60-MariaDB (extension: mysqli 5.5.60-MariaDB) SNMP NET-SNMP 5.7.2 RRDtool 1.6.0 Fping 3.10 (IPv4 only) [cid:image001.png@01D47AD7.745A2890] [cid:image002.png@01D47AD7.745A2890] Jason La | Lead Systems Engineer, Portware Infrastructure Portware, A FactSet Company 99 Park Ave, 16th Floor New York, NY 10016 (212) 370 8353 www.factset.com<http://www.factset.com/>

2 1

Dashboard Oops
by Hamilton, Kent 12 Nov '18

12 Nov '18

Okay, I was playing with the Dashboard this morning (Observium 18.11.9593) and now all I get is "This page isn't working observium.exegy.net didn't send any data." How can I reset things so I get a working Observium back? ________________________________ This e-mail and any documents accompanying it may contain legally privileged and/or confidential information belonging to Exegy, Inc. Such information may be protected from disclosure by law. The information is intended for use by only the addressee. If you are not the intended recipient, you are hereby notified that any disclosure or use of the information is strictly prohibited. If you have received this e-mail in error, please immediately contact the sender by e-mail or phone regarding instructions for return or destruction and do not use or disclose the content to others.

2 1

Re: [Observium] observium Digest, Vol 100, Issue 10
by Pieter Meyer 12 Nov '18

12 Nov '18

Thanks adam I see its resolved in version 9593 Regards Pieter Meyer Converged Group | Licensed ISP 0258/IECNS/JAN/09 75 Witkoppen Rd, North Riding, Gauteng, 2162 Office: +27 10 591 4600 | Mobile: +27 83 233 6614 map <https://goo.gl/maps/WHe3soT1fHm> | website <http://www.convergedgroup.net/> | company blog <http://www.convergedgroup.net/blog/> | linkedin <http://www.linkedin.com/company/converged-telecoms>

1 0

problem with api
by Rowlands Mark 12 Nov '18

12 Nov '18

Version Information Observium 18.11.9580 (9th November 2018) OS Linux 4.4.0-116-generic [amd64] (Ubuntu 16.04) Apache 2.4.18 (Ubuntu) PHP 7.0.32-0ubuntu0.16.04.1 (OPcache: ENABLED) Python 2.7.12 MySQL 10.3.10-MariaDB-1:10.3.10+maria~xenial-log (extension: mysqli 5.0.12-dev) SNMP NET-SNMP 5.7.3 RRDtool 1.5.5 (rrdcached 1.5.5: unix:/var/run/rrdcached.sock) Fping 3.13 (IPv4 and IPv6) Trying to add a device :- I have tried the following incantations :- curl -u admin:PASSWORD http://observium.riksbyggen.intra/api/v0/devices/ -H "Content-Type: application/json" -X POST -d '{"hostname":"papp01-exo"}' curl -u admin:PASSWORD http://observium.riksbyggen.intra/api/v0/devices/ -H "Content-Type: application/json" -X POST -d '{"papp01-exo":"localhost"}' curl -u admin:PASSWORD http://observium.riksbyggen.intra/api/v0/devices/ -H "Content-Type: application/json" -X POST -d '{"papp01-exo":"observium.riksbyggen.intra"}' curl -u admin:POSSWORD http://observium.riksbyggen.intra/api/v0/devices/ -H "Content-Type: application/json" -X POST -d '{'papp01-exo':'observium'}' all of which return "Hostname Required"

2 3

Re: [Observium] observium Digest, Vol 100, Issue 7
by Pieter Meyer 12 Nov '18

12 Nov '18

Hi Adam Where would I look for error in the Java console? Regards Pieter Meyer Converged Group | Licensed ISP 0258/IECNS/JAN/09 75 Witkoppen Rd, North Riding, Gauteng, 2162 Office: +27 10 591 4600 | Mobile: +27 83 233 6614 map <https://goo.gl/maps/WHe3soT1fHm> | website <http://www.convergedgroup.net/> | company blog <http://www.convergedgroup.net/blog/> | linkedin <http://www.linkedin.com/company/converged-telecoms> CAUTION: This email and any attachments may contain information that is confidential and subject to legal privilege. If you are not the intended recipient, you must not read, use, disseminate, distribute or copy this email or any attachments. If you have received this email in error, please notify us immediately and erase this email and any attachments. Thank you. DISCLAIMER: To the maximum extent permitted by law, Converged Group is not liable (including in respect of negligence) for viruses or other defects or for changes made to this email or to any attachments. Before opening or using attachments, check them for viruses and other defects. The information contained in this document is confidential to the addressee and is not the view nor the official policy of Converged Group unless otherwise stated. -----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of observium-request(a)observium.org Sent: Thursday, 08 November 2018 14:00 To: observium(a)observium.org Subject: observium Digest, Vol 100, Issue 7 Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Re: 1024 TB limit on disks when monitored over SNMP...? (Henrik Cednert (Filmlance)) 2. Possibility of disabling a health status (Patrick Kambach) 3. Landing page goes blank if upgraded from 9556 to 9558 (Pieter Meyer) 4. Re: Landing page goes blank if upgraded from 9556 to 9558 (Markus Klock) 5. Re: Landing page goes blank if upgraded from 9556 to 9558 (Pieter Meyer) 6. Re: Landing page goes blank if upgraded from 9556 to 9558 (Adam Armstrong) 7. Re: OS version mismatch in syslog emails (Ben Chase) 8. Neighbours (Christian Eriksson) 9. Re: Neighbours (Adam Armstrong) 10. Re: Neighbours (Adam Armstrong) 11. Re: Neighbours (Adam Armstrong) 12. Re: Neighbours (Christian Eriksson) 13. Re: Neighbours (Adam Armstrong) 14. Re: 1024 TB limit on disks when monitored over SNMP...? (Henrik Cednert (Filmlance)) 15. Re: 1024 TB limit on disks when monitored over SNMP...? (Adam Armstrong) 16. Re: Landing page goes blank if upgraded from 9556 to 9558 (Robert Williams) 17. Re: Landing page goes blank if upgraded from 9556 to 9558 (Adam Armstrong) 18. Contact for Device Type (noclab) 19. Re: Landing page goes blank if upgraded from 9556 to 9558 (Niklas Larsson) 20. Re: Landing page goes blank if upgraded from 9556 to 9558 (Niklas Larsson) 21. Re: Landing page goes blank if upgraded from 9556 to 9558 (Adam Armstrong) 22. Re: Landing page goes blank if upgraded from 9556 to 9558 (Rowlands Mark) 23. Re: Landing page goes blank if upgraded from 9556 to 9558 (Adam Armstrong) ---------------------------------------------------------------------- Message: 1 Date: Wed, 7 Nov 2018 12:26:34 +0000 From: "Henrik Cednert (Filmlance)" <henrik.cednert(a)filmlance.se> To: Observium <observium(a)observium.org> Subject: Re: [Observium] 1024 TB limit on disks when monitored over SNMP...? Message-ID: <984C9B9C-F27F-4352-AAF5-B3B47A6922E1(a)filmlance.se> Content-Type: text/plain; charset="utf-8" Oh my! Oh yeah! Wow! Thanks! =) Indeed I see it now. Some draw error on graph and possible size error. But size is close enough for me. =) Will investigate the draw error. [cid:17280432-131A-4717-A20D-467E62D55BE0@metronome.local] Many thanks!!! -- Henrik Cednert / + 46 704 71 89 54 / CTO / Filmlance Disclaimer, the hideous bs disclaimer at the bottom is forced, sorry. ¯\_(ツ)_/¯ On 7 Nov 2018, at 11:57, Adam Armstrong via observium <observium(a)observium.org<mailto:observium@observium.org>> wrote: Hi Henrik, I've made some minor changes to the storage discovery in r9557. These might make this drive appear. It might still have broken sizes though :) adam. On 2018-11-07 09:29:03, Henrik Cednert (Filmlance) via observium <observium(a)observium.org<mailto:observium@observium.org>> wrote: Morning Adam I’m not sure that all data reported in dskTable is correct. I assume that there’s some sort of math that happens since I don’t really get all the numbers to add up. dskPercent for sure seems about right, but not sure about Total, Avail and Used. I did update net-snmp to latest that was available (1:5.5-60.el6 ), but no change in behaviour. df | grep ddnnas0 /dev/ddnnas0 1772965855232 979888488448 793077366784 56% /ddnnas0 snmpwalk -v2c -c ddn4ucommunity localhost dskTable | grep .1 UCD-SNMP-MIB::dskIndex.1 = INTEGER: 1 UCD-SNMP-MIB::dskPath.1 = STRING: /ddnnas0 UCD-SNMP-MIB::dskDevice.1 = STRING: /dev/ddnnas0 UCD-SNMP-MIB::dskMinimum.1 = INTEGER: -1 UCD-SNMP-MIB::dskMinPercent.1 = INTEGER: 3 UCD-SNMP-MIB::dskTotal.1 = INTEGER: 2147483647 UCD-SNMP-MIB::dskAvail.1 = INTEGER: 2147483647 UCD-SNMP-MIB::dskUsed.1 = INTEGER: 2147483647 UCD-SNMP-MIB::dskPercent.1 = INTEGER: 55 UCD-SNMP-MIB::dskPercentNode.1 = INTEGER: 3 UCD-SNMP-MIB::dskTotalLow.1 = Gauge32: 3439329280 UCD-SNMP-MIB::dskTotalHigh.1 = Gauge32: 412 UCD-SNMP-MIB::dskAvailLow.1 = Gauge32: 2803367936 UCD-SNMP-MIB::dskAvailHigh.1 = Gauge32: 184 UCD-SNMP-MIB::dskUsedLow.1 = Gauge32: 635961344 UCD-SNMP-MIB::dskUsedHigh.1 = Gauge32: 228 UCD-SNMP-MIB::dskErrorFlag.1 = INTEGER: noError(0) UCD-SNMP-MIB::dskErrorMsg.1 = STRING: Cheers -- Henrik Cednert / + 46 704 71 89 54 / CTO / Filmlance Disclaimer, the hideous bs disclaimer at the bottom is forced, sorry. ¯\_(ツ)_/¯ On 7 Nov 2018, at 08:33, Adam Armstrong via observium <observium(a)observium.org<mailto:observium@observium.org>> wrote: Hi Henrik, Can you tell if the data reported in dskTable is correct? We use dskTable to fill in invalid data in hrStorageTable sometimes, but we don't outright collect data from dskTable. I seem to recall this is an issue with ZFS too, and switching to a later version of net-snmp fixes it. There are sadly no 5.8 (or even 5.7) packages for EL6 though (not that I could find!), so you would have to create one. Nothing really depends upon net-snmp, so no real risk in breaking anything! Once upon a time I had 5.6 packages for EL6 floating around from an old requirement, but I seem to have lost them. adam. On 2018-11-06 22:00, Henrik Cednert (Filmlance) via observium wrote: Heya I really wish i was at your level of expertise here Adam, sadly I’m not. =( I googled a bit and walked hrStorageTable and this is the hrStorageDescr from that: HOST-RESOURCES-MIB::hrStorageDescr.1 = STRING: Physical memory HOST-RESOURCES-MIB::hrStorageDescr.3 = STRING: Virtual memory HOST-RESOURCES-MIB::hrStorageDescr.6 = STRING: Memory buffers HOST-RESOURCES-MIB::hrStorageDescr.7 = STRING: Cached memory HOST-RESOURCES-MIB::hrStorageDescr.10 = STRING: Swap space HOST-RESOURCES-MIB::hrStorageDescr.31 = STRING: / HOST-RESOURCES-MIB::hrStorageDescr.35 = STRING: /dev/shm HOST-RESOURCES-MIB::hrStorageDescr.36 = STRING: /boot HOST-RESOURCES-MIB::hrStorageDescr.37 = STRING: /boot-rcvy HOST-RESOURCES-MIB::hrStorageDescr.38 = STRING: /crash HOST-RESOURCES-MIB::hrStorageDescr.39 = STRING: /rcvy HOST-RESOURCES-MIB::hrStorageDescr.40 = STRING: /var HOST-RESOURCES-MIB::hrStorageDescr.41 = STRING: /var-rcvy So no luck there. In diskTable I do see it though: UCD-SNMP-MIB::dskPath.1 = STRING: /ddnnas0 UCD-SNMP-MIB::dskPath.2 = STRING: / So with this, any hints on how to make it work? Or is the first step to update net-snmp? Installed Packages net-snmp.x86_64 1:5.5-54.el6_7.1 @ddn-dvd Cheers and thanks a million -- Henrik Cednert / + 46 704 71 89 54 / CTO / FILMLANCE Disclaimer, the hideous bs disclaimer at the bottom is forced, sorry. ¯\_(ツ)_/¯ On 6 Nov 2018, at 22:53, Adam Armstrong via observium <observium(a)observium.org<mailto:observium@observium.org>> wrote: We actually use the HOST-RESOURCES-MIB hrStorage table, not the UCD-MIB dskTable. Have you checked what SNMP is sending? You can walk the hrStorageTable and dskTable to see what is returned. I seem to remember some issue with SNMP not picking up "strange" filesystems. Making sure you're running the very latest net-snmp might help. Adam. On 2018-11-06 21:17, Henrik Cednert (Filmlance) via observium wrote: Hello So I got the ‘go ahead’ from DDN to monitor it directly on the server. Strange thing is, I’ve added the mount point to the /etc/snmpd.conf but it still doesn’t appear in observium. I’ve played with the syscontact just to make sure that the snmpd.conf is actually read properly upon discovery and poll, and it is. But it does not seem to take this string from conf: disk /ddnnas0 80% And that is the actual mount point, as seen from ‘mount’ here: /dev/ddnnas0 on /ddnnas0 type gpfs (rw,relatime,mtime,nfssync,dev=ddnnas0) Am i missing something obvious? If so, please be gentle and throw me with great force, and maybe anger, in the right direction. =) Cheers and thanks -- Henrik Cednert / + 46 704 71 89 54 / CTO / FILMLANCE Disclaimer, the hideous bs disclaimer at the bottom is forced, sorry. ¯\_(ツ)_/¯ On 23 Oct 2018, at 21:32, Chris Neam via observium <observium(a)observium.org<mailto:observium@observium.org>> wrote: We monitor our GPFS system directly from the GridScaler and have been able to monitor up to 2.6PB so far. I'd guess it is something with the way Windows is handling it. On Tue, Oct 23, 2018 at 12:54 PM Henrik Cednert (Filmlance) via observium <observium(a)observium.org<mailto:observium@observium.org>> wrote: Hello We just expanded a volume on a DDN GPFS system to over 1 PB. I monitor this volume via SNMP via a Windows server. Noticed that I run into a 1024TB cap on the size there though. Trying to understand where this cap is comping from, if it’s the SNMP on windows or something in observium. Anyone that’ve dealt with this? Cheers and thanks -- Henrik Cednert / + 46 704 71 89 54 / CTO / FILMLANCE Disclaimer, the hideous bs disclaimer at the bottom is forced, sorry. ¯\_(ツ)_/¯ DISCLAIMER The information contained in this communication from the sender is confidential. It is intended solely for use by the recipient and others authorized to receive it. If you are not the recipient, you are hereby notified that any disclosure, copying, distribution or taking action in relation of the contents of this information is strictly prohibited and may be unlawful. _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- CHRIS NEAM US Mobile: +1 (703) 628 7897 [1] E-mail: chris.neam(a)vricon.com<mailto:chris.neam@vricon.com> VRICON Visiting address US: 8280 Greensboro Drive, Suite 850, McLean, VA, 22102, USA Sweden: Bröderna Ugglas gata, 581 88 Linköping, Sweden www.vricon.com<http://www.vricon.com/> [1] [2] This e-mail is private and confidential between the sender and the addressee. In the event of misdirection, the recipient is prohibited from using, copying or disseminating it or any information in it. Please notify the above if any misdirection. <Screen Shot 2018-10-23 at 15.29.23.png>_______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium Links: ------ [1] tel:%2B1%20%28703%29%20628%207897 [2] http://www.vricon.com/ _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium DISCLAIMER The information contained in this communication from the sender is confidential. It is intended solely for use by the recipient and others authorized to receive it. If you are not the recipient, you are hereby notified that any disclosure, copying, distribution or taking action in relation of the contents of this information is strictly prohibited and may be unlawful. Links: ------ [1] http://www.vricon.com/ _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium Disclaimer The information contained in this communication from the sender is confidential. It is intended solely for use by the recipient and others authorized to receive it. If you are not the recipient, you are hereby notified that any disclosure, copying, distribution or taking action in relation of the contents of this information is strictly prohibited and may be unlawful. _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

One line change to make Teams notifications look good on phone
by Niklas Larsson 12 Nov '18

12 Nov '18

Hi, adding a summary line/item makes Teams notifications look so much better in lists/phone: Index: includes/alerting/teams.inc.php =================================================================== --- includes/alerting/teams.inc.php (revision 9590) +++ includes/alerting/teams.inc.php (working copy) @@ -19,6 +19,7 @@ // JSON data $data_string = json_encode(array( 'title' => $message_tags['TITLE'], + 'summary' => $message_tags['TITLE'], 'text' => ' ', 'sections' => array( array(

2 1

Status boxes expanding all
by Tomasz Karczewski 10 Nov '18

10 Nov '18

HI, It would be nice status boxes expand after click on „more…” Earlier all status boxes were displayed on frontpage. Tomasz Karczewski Administrator Sieci <mailto:tkarczewski@man.olsztyn.pl> tkarczewski(a)man.olsztyn.pl <http://www.man.olsztyn.pl> http://www.man.olsztyn.pl <http://www.uwm.edu.pl> http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie

1 0

Changed 'smtp_host' address in config.php isn't being recognized
by Joe Brouillette 09 Nov '18

09 Nov '18

Hey all, we upgraded our Exchange server and now it has a new address. I changed the old address, xxx.xxx.xxx.102 to the new address, xxx.xxx.xxx.105 in config.php and Observium still sees the old address. Nov 6 12:00:19 Observe postfix/smtp[27371]: connect to 192.168.2.102[192.168.2.102]:25: No route to host The new address was also changed in /etc/postfix/main.cf. I've rebooted the server a couple of times but no joy. I must be missing something really simple here but I don't have a clue what it could be. Is there still another location where I need to change my new Exchange server's address? Thanks, Joe Brouillette IT Specialist Link Transit 509.664.7643 jobee(a)linktransit.com<mailto:jobee@linktransit.com> [EmailFooter]

2 2

Intentionally adding a duplicate device
by Jason Lixfeld 09 Nov '18

09 Nov '18

Hello, Previously I was able to add a duplicate entry for a device. At the time, it seemed like the easiest way to work around IOS-XR not being able to pull BGP session information inside a VRF from the default snmp context. Creating a separate SNMP context on the box for the VRF(s) in question, with a different community for each would let the duplicate entries poll the BGP session info from within whatever VRF that context included. Now, when I try to add a duplicate it fails due to pre-existing sysName, snmpEngineID and entPhysicalSerialNum. Is there a way to add duplicates anymore, or perhaps a different way to collect BGP session info from within VRF (in addition to the global table)? Thanks in advance.

2 2