- observium - lists.observium.org

check disk I/O on windows
by Andi Felani 18 Sep '18

18 Sep '18

hi all, how to check disk I/O on windows ? anybody can help me?

2 1

snmpbulkwalk vs snmpwalk
by Simon Mousey Smith 18 Sep '18

18 Sep '18

Hi, What is the difference between ‘snmpbulkwalk’ and ‘snmpwalk’ ? I have an issue with a D-Link DGS-1100-24 and the ports of SNMP When I manually run the snmpbulkwalk that observium uses, it times out from getting the ifEntry details However if I run snmpwalk, it walks without any issues? Can I change observium to use snmpwalk for this device and the ports? root@observium:~# /usr/bin/snmpbulkwalk -t '5' -v2c -c public -Pu -OQUs -m IF-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'dlink.rbs':'161' ifEntry ifIndex.1 = 1 ifIndex.2 = 2 ifIndex.3 = 3 ifIndex.4 = 4 ifIndex.5 = 5 ifIndex.6 = 6 ifIndex.7 = 7 ifIndex.8 = 8 ifIndex.9 = 9 ifIndex.10 = 10 ifIndex.11 = 11 ifIndex.12 = 12 ifIndex.13 = 13 ifIndex.14 = 14 ifIndex.15 = 15 ifIndex.16 = 16 ifIndex.17 = 17 ifIndex.18 = 18 ifIndex.19 = 19 ifIndex.20 = 20 ifIndex.21 = 21 ifIndex.22 = 22 ifIndex.23 = 23 ifIndex.24 = 24 ifDescr.1 = D-Link Corporation DGS-1100-24 1.01.018 Port 1 ifDescr.2 = D-Link Corporation DGS-1100-24 1.01.018 Port 2 ifDescr.3 = D-Link Corporation DGS-1100-24 1.01.018 Port 3 ifDescr.4 = D-Link Corporation DGS-1100-24 1.01.018 Port 4 ifDescr.5 = D-Link Corporation DGS-1100-24 1.01.018 Port 5 ifDescr.6 = D-Link Corporation DGS-1100-24 1.01.018 Port 6 Timeout: No Response from udp:dlink.rbs:161 root@observium:~# /usr/bin/snmpwalk -t '5' -v2c -c public -Pu -OQUs -m IF-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'dlink.rbs':'161' ifEntry ifIndex.1 = 1 ifIndex.2 = 2 ifIndex.3 = 3 ifIndex.4 = 4 ifIndex.5 = 5 ifIndex.6 = 6 ifIndex.7 = 7 ifIndex.8 = 8 ifIndex.9 = 9 ifIndex.10 = 10 ifIndex.11 = 11 ifIndex.12 = 12 ifIndex.13 = 13 ifIndex.14 = 14 ifIndex.15 = 15 ifIndex.16 = 16 ifIndex.17 = 17 ifIndex.18 = 18 ifIndex.19 = 19 ifIndex.20 = 20 ifIndex.21 = 21 ifIndex.22 = 22 ifIndex.23 = 23 ifIndex.24 = 24 ifDescr.1 = D-Link Corporation DGS-1100-24 1.01.018 Port 1 ifDescr.2 = D-Link Corporation DGS-1100-24 1.01.018 Port 2 ifDescr.3 = D-Link Corporation DGS-1100-24 1.01.018 Port 3 ifDescr.4 = D-Link Corporation DGS-1100-24 1.01.018 Port 4 ifDescr.5 = D-Link Corporation DGS-1100-24 1.01.018 Port 5 ifDescr.6 = D-Link Corporation DGS-1100-24 1.01.018 Port 6 ifDescr.7 = D-Link Corporation DGS-1100-24 1.01.018 Port 7 ifDescr.8 = D-Link Corporation DGS-1100-24 1.01.018 Port 8 ifDescr.9 = D-Link Corporation DGS-1100-24 1.01.018 Port 9 ifDescr.10 = D-Link Corporation DGS-1100-24 1.01.018 Port 10 ifDescr.11 = D-Link Corporation DGS-1100-24 1.01.018 Port 11 ifDescr.12 = D-Link Corporation DGS-1100-24 1.01.018 Port 12 ifDescr.13 = D-Link Corporation DGS-1100-24 1.01.018 Port 13 ifDescr.14 = D-Link Corporation DGS-1100-24 1.01.018 Port 14 ifDescr.15 = D-Link Corporation DGS-1100-24 1.01.018 Port 15 ifDescr.16 = D-Link Corporation DGS-1100-24 1.01.018 Port 16 ifDescr.17 = D-Link Corporation DGS-1100-24 1.01.018 Port 17 ifDescr.18 = D-Link Corporation DGS-1100-24 1.01.018 Port 18 ifDescr.19 = D-Link Corporation DGS-1100-24 1.01.018 Port 19 ifDescr.20 = D-Link Corporation DGS-1100-24 1.01.018 Port 20 ifDescr.21 = D-Link Corporation DGS-1100-24 1.01.018 Port 21 ifDescr.22 = D-Link Corporation DGS-1100-24 1.01.018 Port 22 ifDescr.23 = D-Link Corporation DGS-1100-24 1.01.018 Port 23 ifDescr.24 = D-Link Corporation DGS-1100-24 1.01.018 Port 24 ifType.1 = ethernetCsmacd ifType.2 = ethernetCsmacd ifType.3 = ethernetCsmacd ifType.4 = ethernetCsmacd ifType.5 = ethernetCsmacd ifType.6 = ethernetCsmacd ifType.7 = ethernetCsmacd ifType.8 = ethernetCsmacd ifType.9 = ethernetCsmacd ifType.10 = ethernetCsmacd ifType.11 = ethernetCsmacd ifType.12 = ethernetCsmacd ifType.13 = ethernetCsmacd ifType.14 = ethernetCsmacd ifType.15 = ethernetCsmacd ifType.16 = ethernetCsmacd ifType.17 = ethernetCsmacd ifType.18 = ethernetCsmacd ifType.19 = ethernetCsmacd ifType.20 = ethernetCsmacd ifType.21 = ethernetCsmacd ifType.22 = ethernetCsmacd ifType.23 = ethernetCsmacd ifType.24 = ethernetCsmacd ifMtu.1 = 1522 ifMtu.2 = 1522 ifMtu.3 = 1522 ifMtu.4 = 1522 ifMtu.5 = 1522 ifMtu.6 = 1522 ifMtu.7 = 1522 ifMtu.8 = 1522 ifMtu.9 = 1522 ifMtu.10 = 1522 ifMtu.11 = 1522 ifMtu.12 = 1522 ifMtu.13 = 1522 ifMtu.14 = 1522 ifMtu.15 = 1522 ifMtu.16 = 1522 ifMtu.17 = 1522 ifMtu.18 = 1522 ifMtu.19 = 1522 ifMtu.20 = 1522 ifMtu.21 = 1522 ifMtu.22 = 1522 ifMtu.23 = 1522 ifMtu.24 = 1522 ifSpeed.1 = 100000000 ifSpeed.2 = 0 ifSpeed.3 = 0 ifSpeed.4 = 0 ifSpeed.5 = 0 ifSpeed.6 = 0 ifSpeed.7 = 0 ifSpeed.8 = 0 ifSpeed.9 = 0 ifSpeed.10 = 0 ifSpeed.11 = 0 ifSpeed.12 = 0 ifSpeed.13 = 0 ifSpeed.14 = 0 ifSpeed.15 = 0 ifSpeed.16 = 0 ifSpeed.17 = 0 ifSpeed.18 = 0 ifSpeed.19 = 0 ifSpeed.20 = 0 ifSpeed.21 = 0 ifSpeed.22 = 0 ifSpeed.23 = 0 ifSpeed.24 = 0 ifPhysAddress.1 = ec:22:80:40:3c:6 ifPhysAddress.2 = ec:22:80:40:3c:6 ifPhysAddress.3 = ec:22:80:40:3c:6 ifPhysAddress.4 = ec:22:80:40:3c:6 ifPhysAddress.5 = ec:22:80:40:3c:6 ifPhysAddress.6 = ec:22:80:40:3c:6 ifPhysAddress.7 = ec:22:80:40:3c:6 ifPhysAddress.8 = ec:22:80:40:3c:6 ifPhysAddress.9 = ec:22:80:40:3c:6 ifPhysAddress.10 = ec:22:80:40:3c:6 ifPhysAddress.11 = ec:22:80:40:3c:6 ifPhysAddress.12 = ec:22:80:40:3c:6 ifPhysAddress.13 = ec:22:80:40:3c:6 ifPhysAddress.14 = ec:22:80:40:3c:6 ifPhysAddress.15 = ec:22:80:40:3c:6 ifPhysAddress.16 = ec:22:80:40:3c:6 ifPhysAddress.17 = ec:22:80:40:3c:6 ifPhysAddress.18 = ec:22:80:40:3c:6 ifPhysAddress.19 = ec:22:80:40:3c:6 ifPhysAddress.20 = ec:22:80:40:3c:6 ifPhysAddress.21 = ec:22:80:40:3c:6 ifPhysAddress.22 = ec:22:80:40:3c:6 ifPhysAddress.23 = ec:22:80:40:3c:6 ifPhysAddress.24 = ec:22:80:40:3c:6 ifAdminStatus.1 = up ifAdminStatus.2 = up ifAdminStatus.3 = up ifAdminStatus.4 = up ifAdminStatus.5 = up ifAdminStatus.6 = up ifAdminStatus.7 = up ifAdminStatus.8 = up ifAdminStatus.9 = up ifAdminStatus.10 = up ifAdminStatus.11 = up ifAdminStatus.12 = up ifAdminStatus.13 = up ifAdminStatus.14 = up ifAdminStatus.15 = up ifAdminStatus.16 = up ifAdminStatus.17 = up ifAdminStatus.18 = up ifAdminStatus.19 = up ifAdminStatus.20 = up ifAdminStatus.21 = up ifAdminStatus.22 = up ifAdminStatus.23 = up ifAdminStatus.24 = up ifOperStatus.1 = up ifOperStatus.2 = down ifOperStatus.3 = down ifOperStatus.4 = down ifOperStatus.5 = down ifOperStatus.6 = down ifOperStatus.7 = down ifOperStatus.8 = down ifOperStatus.9 = down ifOperStatus.10 = down ifOperStatus.11 = down ifOperStatus.12 = down ifOperStatus.13 = down ifOperStatus.14 = down ifOperStatus.15 = down ifOperStatus.16 = down ifOperStatus.17 = down ifOperStatus.18 = down ifOperStatus.19 = down ifOperStatus.20 = down ifOperStatus.21 = down ifOperStatus.22 = down ifOperStatus.23 = down ifOperStatus.24 = down ifLastChange.1 = 0:0:00:00.00 ifLastChange.2 = 0:0:00:00.00 ifLastChange.3 = 0:0:00:00.00 ifLastChange.4 = 0:0:00:00.00 ifLastChange.5 = 0:0:00:00.00 ifLastChange.6 = 0:0:00:00.00 ifLastChange.7 = 0:0:00:00.00 ifLastChange.8 = 0:0:00:00.00 ifLastChange.9 = 0:0:00:00.00 ifLastChange.10 = 0:0:00:00.00 ifLastChange.11 = 0:0:00:00.00 ifLastChange.12 = 0:0:00:00.00 ifLastChange.13 = 0:0:00:00.00 ifLastChange.14 = 0:0:00:00.00 ifLastChange.15 = 0:0:00:00.00 ifLastChange.16 = 0:0:00:00.00 ifLastChange.17 = 0:0:00:00.00 ifLastChange.18 = 0:0:00:00.00 ifLastChange.19 = 0:0:00:00.00 ifLastChange.20 = 0:0:00:00.00 ifLastChange.21 = 0:0:00:00.00 ifLastChange.22 = 0:0:00:00.00 ifLastChange.23 = 0:0:00:00.00 ifLastChange.24 = 0:0:00:00.00 ifInOctets.1 = 2260563 ifInOctets.2 = 0 ifInOctets.3 = 0 ifInOctets.4 = 0 ifInOctets.5 = 0 ifInOctets.6 = 0 ifInOctets.7 = 0 ifInOctets.8 = 75140 ifInOctets.9 = 0 ifInOctets.10 = 0 ifInOctets.11 = 0 ifInOctets.12 = 0 ifInOctets.13 = 0 ifInOctets.14 = 0 ifInOctets.15 = 0 ifInOctets.16 = 0 ifInOctets.17 = 179128 ifInOctets.18 = 0 ifInOctets.19 = 0 ifInOctets.20 = 0 ifInOctets.21 = 0 ifInOctets.22 = 0 ifInOctets.23 = 0 ifInOctets.24 = 0 ifInUcastPkts.1 = 10964 ifInUcastPkts.2 = 0 ifInUcastPkts.3 = 0 ifInUcastPkts.4 = 0 ifInUcastPkts.5 = 0 ifInUcastPkts.6 = 0 ifInUcastPkts.7 = 0 ifInUcastPkts.8 = 167 ifInUcastPkts.9 = 0 ifInUcastPkts.10 = 0 ifInUcastPkts.11 = 0 ifInUcastPkts.12 = 0 ifInUcastPkts.13 = 0 ifInUcastPkts.14 = 0 ifInUcastPkts.15 = 0 ifInUcastPkts.16 = 0 ifInUcastPkts.17 = 353 ifInUcastPkts.18 = 0 ifInUcastPkts.19 = 0 ifInUcastPkts.20 = 0 ifInUcastPkts.21 = 0 ifInUcastPkts.22 = 0 ifInUcastPkts.23 = 0 ifInUcastPkts.24 = 0 ifInNUcastPkts.1 = 9051 ifInNUcastPkts.2 = 0 ifInNUcastPkts.3 = 0 ifInNUcastPkts.4 = 0 ifInNUcastPkts.5 = 0 ifInNUcastPkts.6 = 0 ifInNUcastPkts.7 = 0 ifInNUcastPkts.8 = 587 ifInNUcastPkts.9 = 0 ifInNUcastPkts.10 = 0 ifInNUcastPkts.11 = 0 ifInNUcastPkts.12 = 0 ifInNUcastPkts.13 = 0 ifInNUcastPkts.14 = 0 ifInNUcastPkts.15 = 0 ifInNUcastPkts.16 = 0 ifInNUcastPkts.17 = 182 ifInNUcastPkts.18 = 0 ifInNUcastPkts.19 = 0 ifInNUcastPkts.20 = 0 ifInNUcastPkts.21 = 0 ifInNUcastPkts.22 = 0 ifInNUcastPkts.23 = 0 ifInNUcastPkts.24 = 0 ifInDiscards.1 = 0 ifInDiscards.2 = 0 ifInDiscards.3 = 0 ifInDiscards.4 = 0 ifInDiscards.5 = 0 ifInDiscards.6 = 0 ifInDiscards.7 = 0 ifInDiscards.8 = 0 ifInDiscards.9 = 0 ifInDiscards.10 = 0 ifInDiscards.11 = 0 ifInDiscards.12 = 0 ifInDiscards.13 = 0 ifInDiscards.14 = 0 ifInDiscards.15 = 0 ifInDiscards.16 = 0 ifInDiscards.17 = 0 ifInDiscards.18 = 0 ifInDiscards.19 = 0 ifInDiscards.20 = 0 ifInDiscards.21 = 0 ifInDiscards.22 = 0 ifInDiscards.23 = 0 ifInDiscards.24 = 0 ifInErrors.1 = 0 ifInErrors.2 = 0 ifInErrors.3 = 0 ifInErrors.4 = 0 ifInErrors.5 = 0 ifInErrors.6 = 0 ifInErrors.7 = 0 ifInErrors.8 = 0 ifInErrors.9 = 0 ifInErrors.10 = 0 ifInErrors.11 = 0 ifInErrors.12 = 0 ifInErrors.13 = 0 ifInErrors.14 = 0 ifInErrors.15 = 0 ifInErrors.16 = 0 ifInErrors.17 = 0 ifInErrors.18 = 0 ifInErrors.19 = 0 ifInErrors.20 = 0 ifInErrors.21 = 0 ifInErrors.22 = 0 ifInErrors.23 = 0 ifInErrors.24 = 0 ifInUnknownProtos.1 = 0 ifInUnknownProtos.2 = 0 ifInUnknownProtos.3 = 0 ifInUnknownProtos.4 = 0 ifInUnknownProtos.5 = 0 ifInUnknownProtos.6 = 0 ifInUnknownProtos.7 = 0 ifInUnknownProtos.8 = 0 ifInUnknownProtos.9 = 0 ifInUnknownProtos.10 = 0 ifInUnknownProtos.11 = 0 ifInUnknownProtos.12 = 0 ifInUnknownProtos.13 = 0 ifInUnknownProtos.14 = 0 ifInUnknownProtos.15 = 0 ifInUnknownProtos.16 = 0 ifInUnknownProtos.17 = 0 ifInUnknownProtos.18 = 0 ifInUnknownProtos.19 = 0 ifInUnknownProtos.20 = 0 ifInUnknownProtos.21 = 0 ifInUnknownProtos.22 = 0 ifInUnknownProtos.23 = 0 ifInUnknownProtos.24 = 0 ifOutOctets.1 = 2033497 ifOutOctets.2 = 0 ifOutOctets.3 = 0 ifOutOctets.4 = 0 ifOutOctets.5 = 0 ifOutOctets.6 = 0 ifOutOctets.7 = 0 ifOutOctets.8 = 0 ifOutOctets.9 = 0 ifOutOctets.10 = 0 ifOutOctets.11 = 0 ifOutOctets.12 = 0 ifOutOctets.13 = 0 ifOutOctets.14 = 0 ifOutOctets.15 = 0 ifOutOctets.16 = 0 ifOutOctets.17 = 265264 ifOutOctets.18 = 0 ifOutOctets.19 = 0 ifOutOctets.20 = 0 ifOutOctets.21 = 0 ifOutOctets.22 = 0 ifOutOctets.23 = 0 ifOutOctets.24 = 0 ifOutUcastPkts.1 = 10212 ifOutUcastPkts.2 = 0 ifOutUcastPkts.3 = 0 ifOutUcastPkts.4 = 0 ifOutUcastPkts.5 = 0 ifOutUcastPkts.6 = 0 ifOutUcastPkts.7 = 0 ifOutUcastPkts.8 = 0 ifOutUcastPkts.9 = 0 ifOutUcastPkts.10 = 0 ifOutUcastPkts.11 = 0 ifOutUcastPkts.12 = 0 ifOutUcastPkts.13 = 0 ifOutUcastPkts.14 = 0 ifOutUcastPkts.15 = 0 ifOutUcastPkts.16 = 0 ifOutUcastPkts.17 = 308 ifOutUcastPkts.18 = 0 ifOutUcastPkts.19 = 0 ifOutUcastPkts.20 = 0 ifOutUcastPkts.21 = 0 ifOutUcastPkts.22 = 0 ifOutUcastPkts.23 = 0 ifOutUcastPkts.24 = 0 ifOutNUcastPkts.1 = 8 ifOutNUcastPkts.2 = 0 ifOutNUcastPkts.3 = 0 ifOutNUcastPkts.4 = 0 ifOutNUcastPkts.5 = 0 ifOutNUcastPkts.6 = 0 ifOutNUcastPkts.7 = 0 ifOutNUcastPkts.8 = 0 ifOutNUcastPkts.9 = 0 ifOutNUcastPkts.10 = 0 ifOutNUcastPkts.11 = 0 ifOutNUcastPkts.12 = 0 ifOutNUcastPkts.13 = 0 ifOutNUcastPkts.14 = 0 ifOutNUcastPkts.15 = 0 ifOutNUcastPkts.16 = 0 ifOutNUcastPkts.17 = 5 ifOutNUcastPkts.18 = 0 ifOutNUcastPkts.19 = 0 ifOutNUcastPkts.20 = 0 ifOutNUcastPkts.21 = 0 ifOutNUcastPkts.22 = 0 ifOutNUcastPkts.23 = 0 ifOutNUcastPkts.24 = 0 ifOutDiscards.1 = 0 ifOutDiscards.2 = 0 ifOutDiscards.3 = 0 ifOutDiscards.4 = 0 ifOutDiscards.5 = 0 ifOutDiscards.6 = 0 ifOutDiscards.7 = 0 ifOutDiscards.8 = 0 ifOutDiscards.9 = 0 ifOutDiscards.10 = 0 ifOutDiscards.11 = 0 ifOutDiscards.12 = 0 ifOutDiscards.13 = 0 ifOutDiscards.14 = 0 ifOutDiscards.15 = 0 ifOutDiscards.16 = 0 ifOutDiscards.17 = 0 ifOutDiscards.18 = 0 ifOutDiscards.19 = 0 ifOutDiscards.20 = 0 ifOutDiscards.21 = 0 ifOutDiscards.22 = 0 ifOutDiscards.23 = 0 ifOutDiscards.24 = 0 ifOutErrors.1 = 0 ifOutErrors.2 = 0 ifOutErrors.3 = 0 ifOutErrors.4 = 0 ifOutErrors.5 = 0 ifOutErrors.6 = 0 ifOutErrors.7 = 0 ifOutErrors.8 = 0 ifOutErrors.9 = 0 ifOutErrors.10 = 0 ifOutErrors.11 = 0 ifOutErrors.12 = 0 ifOutErrors.13 = 0 ifOutErrors.14 = 0 ifOutErrors.15 = 0 ifOutErrors.16 = 0 ifOutErrors.17 = 0 ifOutErrors.18 = 0 ifOutErrors.19 = 0 ifOutErrors.20 = 0 ifOutErrors.21 = 0 ifOutErrors.22 = 0 ifOutErrors.23 = 0 ifOutErrors.24 = 0 ifOutQLen.1 = 0 ifOutQLen.2 = 0 ifOutQLen.3 = 0 ifOutQLen.4 = 0 ifOutQLen.5 = 0 ifOutQLen.6 = 0 ifOutQLen.7 = 0 ifOutQLen.8 = 0 ifOutQLen.9 = 0 ifOutQLen.10 = 0 ifOutQLen.11 = 0 ifOutQLen.12 = 0 ifOutQLen.13 = 0 ifOutQLen.14 = 0 ifOutQLen.15 = 0 ifOutQLen.16 = 0 ifOutQLen.17 = 0 ifOutQLen.18 = 0 ifOutQLen.19 = 0 ifOutQLen.20 = 0 ifOutQLen.21 = 0 ifOutQLen.22 = 0 ifOutQLen.23 = 0 ifOutQLen.24 = 0 ifSpecific.1 = zeroDotZero ifSpecific.2 = zeroDotZero ifSpecific.3 = zeroDotZero ifSpecific.4 = zeroDotZero ifSpecific.5 = zeroDotZero ifSpecific.6 = zeroDotZero ifSpecific.7 = zeroDotZero ifSpecific.8 = zeroDotZero ifSpecific.9 = zeroDotZero ifSpecific.10 = zeroDotZero ifSpecific.11 = zeroDotZero ifSpecific.12 = zeroDotZero ifSpecific.13 = zeroDotZero ifSpecific.14 = zeroDotZero ifSpecific.15 = zeroDotZero ifSpecific.16 = zeroDotZero ifSpecific.17 = zeroDotZero ifSpecific.18 = zeroDotZero ifSpecific.19 = zeroDotZero ifSpecific.20 = zeroDotZero ifSpecific.21 = zeroDotZero ifSpecific.22 = zeroDotZero ifSpecific.23 = zeroDotZero ifSpecific.24 = zeroDotZero root@observium:~# Regards Simon

4 6

Observium poller is becoming slow
by Ming Wong, CLSA 18 Sep '18

18 Sep '18

Hi, The polling time for each device is becoming long when more and more devices added to Observium. From the poller debug output most of the time is spent on SQL update. For a network switch, each port will trigger a SQL update. Is it possible for Observium to poll all ports first, and then have a single SQL update statement covering all ports ? Any advice in enhancing the polling speed or database performance ? Thanks and regards, Ming The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. Please consider before printing. CLSA is ISO14001 certified and committed to reducing its impact on the environment.

4 5

Cisco 3850 Stack
by Jacek.Dabrowski＠selgros.pl 17 Sep '18

17 Sep '18

Hello, Does anyone know why Observium cannot see stacking information from Cisco Cat 3850? In Catalyst 3750 and 9300 everything is fine. In Device Cisco- 3850 MIBs, CISCO-STACKWISE-MIB not exist !!! OiD showing correct information [cid:image003.png@01D44E66.F0517D10] >From 3850 [cid:image001.png@01D44E66.7CD631F0] >From 9300 [cid:image002.png@01D44E66.7CD631F0] Pozdrawiam Jacek Dąbrowski

2 4

unknown processor type
by Andi Felani 17 Sep '18

17 Sep '18

hi, this is the first time i know about observium last week i already install on debian 9 all device running well like cisco switch, cisco air, printer etc when i try monitoring windows that unknown processor type

5 11

problem in graphics of more than 1000 devices
by Wilbert Martínez López 17 Sep '18

17 Sep '18

hello can you please support me with the following situation I have, I installed Obervium in a virtual machine with 8 Gb of RAM and 8 cores, which have an Intel Xeon processor E5-1620 v3 at 3.50 Ghz, hard drive of 200 GB, has installed a version of Ubuntu 16.04.5 with Observium version CE17.9.0 when it had 30 devices added works well in terms of graphics, but when we added more antennas in total 1085 at the time it has become slow and also the graphics shows incomplete of any element, cpu, memory, ports, etc, the devices aggregates are radios of ubiquiti and mikrotik, I attach the images where it shows the commented of the graphics graph a month from a port graph to 6 hours a port the same situation occurs with the graphics of memory, processor, memory or any ports of all devices Wilbert.

9 20

snmpget on multiple OID fails on Eaton UPS
by Mailing Lists 14 Sep '18

14 Sep '18

We have around 22 Eaton UPS devices currently monitored on Observium and I have been investigating today why about 25% of them refuse to return a syslocation. It seems that the devices just don't reliably return snmpget when multiple OID are queried at once, at least for these objects. Specifically, when taking the following command from the poller debug and running it manually: /usr/bin/snmpget -t '4' -r '2' -v3 -l 'authPriv' -n '' -x 'DES' -X 'removed' -a 'MD5' -A 'removed' -u 'observium' -Pu -OQUs -m SNMPv2-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'device':'161' sysUpTime.0 sysLocation.0 sysContact.0 sysName.0 The request times out even when increasing the timeout. When reducing the number of OID queried to 3 or less the device seems to respond: /usr/bin/snmpget -t '4' -r '2' -v3 -l 'authPriv' -n '' -x 'DES' -X 'removed' -a 'MD5' -A 'removed' -u 'observium' -Pu -OQUs -m SNMPv2-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'device':'161' sysUpTime.0 sysLocation.0 sysContact.0 sysUpTime.0 = 0:0:31:01.19 sysLocation.0 = location sysContact.0 = user(a)example.com /usr/bin/snmpget -t '4' -r '2' -v3 -l 'authPriv' -n '' -x 'DES' -X 'removed' -a 'MD5' -A 'removed' -u 'observium' -Pu -OQUs -m SNMPv2-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'device':'161' sysLocation.0 sysContact.0 sysName.0 sysLocation.0 = location sysContact.0 = user(a)example.com sysName.0 = device Is there a way to configure the behaviour to reduce the number of simultaneous OID requested to make this work reliably? Thanks, Tim C

4 15

Bills API
by MKS 14 Sep '18

14 Sep '18

Hello Has these been any requests of added more functions to the bill API? (create/update, delete, etc) Can I expect that this will be add in a near term future (e.g. this year) or does this have to be a professional services job to get this feature? Regards MKS

1 0

731 Revisions behind
by Thomas Steffensen 11 Sep '18

11 Sep '18

Hi, I am currently running: Version Information Observium CE 0.16.10.8128 (6th October 2016) OS Linux 3.2.0-4-amd64 [amd64] (Debian 7.11) Apache 2.2.22 (Debian) PHP 5.4.45-0+deb7u11 Python 2.7.3 MySQL 5.5.58-0+deb7u1 (extension: mysqli 5.5.58) SNMP NET-SNMP 5.4.3 RRDtool 1.4.7 And I would really like to upgrade to version 17.9.8859 which is 731 revisions ahead. However, being 2 years behind on updates I admit that I am having a little bit of an issue with the consequences of this. Is there any best practices I should follow or are there revisions that I should upgrade to first before going to the latest? Med venligst hilsen, Thomas Steffensen Network Administrator Parknet | Esromgade 15, opgang 1, 5. sal | 2200 København N | Phone +45 3690 6000 Mobil +45 4265 0504 | www.parknet.dk<http://www.parknet.dk/>

2 1

Juniper firewall MIB
by pierremarie.cossey＠orange.com 11 Sep '18

11 Sep '18

Hello Did you plan to implement JUNIPER-FIREWALL-MIB in next versions ? Thx for your answer Regards PM Envoyé de mon Galaxy S8 Orange _________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you.

3 3

Re: [Observium] TP-Link switches freeze with new Observium CE
by Mike Stupalov 10 Sep '18

10 Sep '18

Hrm, on all my tested TP-Link switches this feature improved polling speed. That why separate_walk feature for this os enabled. But such problems are certainly unacceptable, I will disable that for os. Anyway, if you have not so many devices, goto device edit page -> Modules -> disable 'separate_walk' option. > Attila Nagy <mailto:tylla_at_memetic.org@tylla.hu> > 7 September 2018 at 19:31 > Hi List! > > Firstly our appreciations go to the team for the new CE version. > Thanks a lot! > > Now the somewhat bitter part: we updated yesterday evening to the > latest CE version and today morning we were confronted with the > problem that a few Tp-Link switches have frozen. To be more precise, > only the management part was frozen, so the switch was degraded to a > dumb non-manageable switch. After reboot the switches return to full > function only to freeze again on next SNMP poll. > > The switches in question are all T1600G-28TS or T1600G-28PS > (poor-man's manageable gigabit switches :-)) > There is no newer firmware update available for them. > They worked perfectly with the previous CE version up until the update. > > We have other Tp-Link switches which are not affected by the same > problem: TL-SG2424, TL-SG2216, TL-SG2008. > > > We tried to narrow down the problem, and it seems that discovery works > as it should, the freeze enacts during the polling, more exactly when > the ports module runs. Looking at the debug log the following command > produces the freeze: > /usr/bin/snmpget -v2c -c 'public' -Pu -OQUs -m IF-MIB -M > /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp > 'udp':'switch-test':'161' ifInMulticastPkts.1 ifOutMulticastPkts.1 > ifInBroadcastPkts.1 ifOutBroadcastPkts.1 ifHCInOctets.1 > ifHCOutOctets.1 ifHCInUcastPkts.1 ifHCOutUcastPkts.1 > ifHCInMulticastPkts.1 ifHCOutMulticastPkts.1 ifHCInBroadcastPkts.1 > ifHCOutBroadcastPkts.1 ifInOctets.1 ifOutOctets.1 ifInUcastPkts.1 > ifOutUcastPkts.1 ifInNUcastPkts.1 ifOutNUcastPkts.1 ifInDiscards.1 > ifOutDiscards.1 ifInErrors.1 ifOutErrors.1 ifInUnknownProtos.1 ifMtu.1 > ifSpeed.1 ifPhysAddress.1 ifAdminStatus.1 ifLastChange.1 > ifPromiscuousMode.1 ifConnectorPresent.1 > > From here onward there is no SNMP response from the switch, the SYS > LED stops blinking and is frozen in whichever state it was, and there > is no network connectivity to the switch (does not respond to ping and > the management interface is inaccessible). The dumb switch hardware > was still working for some time, but this was inconsistent, some > switches have frozen to a complete halt some time after, while others > were still working as dumb switches. As these are under constant load > we didn't had the time to more thoroughly investigate on them, we > restored their functionality and disabled them in Observium. > We have one extra hardware that we can put online for testing if needed. > > > My questions would be: > - Should I include a full debug log or the above info is enough? > - Has anyone met the same problem/has a solution to it? > - Can we know what was changed on the above command line, so maybe as > a workaround we can disable that single feature? > - I suspect this is a firmware issue, but I am not sure (that's why > I'm asking here first, here I have way bigger chances to receive > meaningful answers compared to Tp-Link's support), maybe somebody can > help me narrow down the firmware bug if it is really one. > > Thank you guys in advance. > > Best regards, > Tylla > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov https://stupalov.com -- Mike Stupalov Observium Limited, http://observium.org

4 4

Observium site blank after logging in
by Stallings, Breisch 10 Sep '18

10 Sep '18

I've acquired an Observium implementation, which worked perfectly fine a few months ago. Nothing that I know of has changed over the past few months. Now we can get to the login screen as usual. As soon as you enter your credentials and login, the very next screen is completely blank and nothing appears. We've rebooted the box several times. Today I upgraded to the latest release - 9431. I'm not very proficient working through Linux troubleshooting, which is was the base OS is. Has anyone else seen this issue and possibly how to troubleshoot/resolve it? Thank You. ****************************************************************************************** This message may contain confidential or proprietary information intended only for the use of the addressee(s) named above or may contain information that is legally privileged. If you are not the intended addressee, or the person responsible for delivering it to the intended addressee, you are hereby notified that reading, disseminating, distributing or copying this message is strictly prohibited. If you have received this message by mistake, please immediately notify us by replying to the message and delete the original message and any copies immediately thereafter. Thank you. ****************************************************************************************** CLLD

2 1

bng_active_sessions not graphed anymore
by Klimek, Denis 10 Sep '18

10 Sep '18

Hi, can someone help me to debug the graphing of "bng_active_sessions"? Which module is responsible etc pp? I noticed that Observium stopped graphing it for every Cisco ASR device for already 2 weeks. Based on our logfiles there was no update at that time. Mit freundlichem Gruß Stadtwerke Norderstedt Denis Klimek Professional Network Engineer IP-Systemtechnik Tel: 040 / 521 04 - 1049 Mobil: 0151 / 652 219 06 dklimek(a)stadtwerke-norderstedt.de<mailto:dklimek@stadtwerke-norderstedt.de> www.stadtwerke-norderstedt.de<http://www.stadtwerke-norderstedt.de/>

2 1

Add UPS-MIB to Mikrotik discovery
by Kaiser, Erich 09 Sep '18

09 Sep '18

Any chance you can add the UPS-MIB to the mikrotik discovery? A lot of guys are using the mikrotik to monitor UPS via USB/serial. Sincerely, Erich Kaiser The Fusion Network erich(a)gotfusion.net Office: 815-570-3101

2 3

Re: [Observium] Devices not being discovered
by Michael 08 Sep '18

08 Sep '18

The answer is in the CLI output when you tried adding the device there. ==== # ./add_device.php jr01 home v2c 161 udp Observium CE 18.9.9420 Add Device(s) Try to add jr01: Trying v2c community *** [0] ... No reply on given community *** using v2c. Could not reach jr01 with given SNMP parameters using v2c. Devices failed: 1. ==== Your device is not answering your SNMP queries. I'd start by checking the following: - wrong community string - wrong dns/hosts entry - snmpd on the target not listening/bound correctly for remote v2c queries - local firewall on target device Cheers, Michael > On 8 Sep 2018, at 1:17 pm, Michael <michael(a)smarsz.com> wrote: > > The answer is in the CLI output when you tried adding the device there. > > > ==== > # ./add_device.php jr01 home v2c 161 udp > Observium CE 18.9.9420 > Add Device(s) > > Try to add jr01: > Trying v2c community *** [0] ... > No reply on given community *** using v2c. > Could not reach jr01 with given SNMP parameters using v2c. > Devices failed: 1. > ==== > > > Your device is not answering your SNMP queries. I'd start by checking the following: > > - wrong community string > - wrong dns/hosts entry > - snmpd on the target not listening/bound correctly for remote v2c queries > - local firewall on target device > > > Cheers, > > Michael > > > > > > > > >> On 8 Sep 2018, at 10:42 am, Adam Armstrong <adama(a)memetic.org> wrote: >> >> No, I mean that poller run was pointless because how are you going to poll something which isn't even in observium? >> >> Adam. >> >> Sent from BlueMail >> On 8 Sep 2018, at 01:01, Roland Hill <roland.lists(a)hillnet.co.nz> wrote: >> On Fri, 07 Sep 2018 or thereabouts, Adam Armstrong came forth with: >> >> You do not have any devices in the database called "jr01". >> >> I deleted jr01 yesterday thinking that re-adding it might magically fix >> whatever the issue is. >> >> jr01 exists, can be founf on the network and has snmp running. >> >> ==== >> # fping jr01 >> jr01 is alive >> >> # systemctl status snmpd >> ● snmpd.service - Simple Network Management Protocol (SNMP) Daemon. >> Loaded: loaded (/lib/systemd/system/snmpd.service; enabled; vendor preset: enabled) >> Active: active (running) since Fri 2018-09-07 17:59:00 NZST; 17h ago >> Process: 1118 ExecStartPre=/bin/mkdir -p /var/run/agentx (code=exited, status=0/SUCCESS) >> Main PID: 1121 (snmpd) >> Tasks: 1 (limit: 4915) >> CGroup: /system.slice/snmpd.service >> └─1121 /usr/sbin/snmpd -Lsd -Lf /dev/null -u Debian-snmp -g Debian-snmp -I -smux mteTrigger mteTriggerConf -f >> >> >> # ps aux | grep snmpd >> Debian-+ 1121 0.0 0.1 65024 11364 ? Ss Sep07 0:44 /usr/sbin/snmpd -Lsd -Lf /dev/null -u Debian-snmp -g Debian-snmp -I -smux mteTrigger mteTriggerConf -f >> >> ==== >> >> Adding the device jr01 from the command line fails: >> >> ==== >> # ./add_device.php jr01 home v2c 161 udp >> Observium CE 18.9.9420 >> Add Device(s) >> >> Try to add jr01: >> Trying v2c community *** [0] ... >> No reply on given community *** using v2c. >> Could not reach jr01 with given SNMP parameters using v2c. >> Devices failed: 1. >> ==== >> >> I'm out of idea's but will go back to first principles and walk the >> install guide again just in case I have overlooked anything. jr01 has >> previously been discovered okay, but maybe I changed something and don't >> remember. >> >> I appreciate your help Adam. >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >

3 3

Devices not being discovered
by Roland Hill 08 Sep '18

08 Sep '18

Hi all, I've been running the CE version of Observium for a few years now, always upgrading as the new releases come out. Earlier this year my server hosting Observium updated to Ubuntu 18.04 and php7x. As previously raised on list, this was incompatible with the previous CE version. No problem, I waited it out. Now my issue. Since upgrading to the latest CE version, 5 out of my 7 devices (home network) are no longer being discovered. I can confirm DNS is working. I've debugged as much as I can, including reinstalling snmpd on the Ubuntu boxes. The devices which are staying down are my Ubuntu boxes and Unifi AP and Secure gateway. Any direction on debugging would be greatly appreciated. -- Regards, Roland

2 11

TP-Link switches freeze with new Observium CE
by Attila Nagy 07 Sep '18

07 Sep '18

Hi List! Firstly our appreciations go to the team for the new CE version. Thanks a lot! Now the somewhat bitter part: we updated yesterday evening to the latest CE version and today morning we were confronted with the problem that a few Tp-Link switches have frozen. To be more precise, only the management part was frozen, so the switch was degraded to a dumb non-manageable switch. After reboot the switches return to full function only to freeze again on next SNMP poll. The switches in question are all T1600G-28TS or T1600G-28PS (poor-man's manageable gigabit switches :-)) There is no newer firmware update available for them. They worked perfectly with the previous CE version up until the update. We have other Tp-Link switches which are not affected by the same problem: TL-SG2424, TL-SG2216, TL-SG2008. We tried to narrow down the problem, and it seems that discovery works as it should, the freeze enacts during the polling, more exactly when the ports module runs. Looking at the debug log the following command produces the freeze: /usr/bin/snmpget -v2c -c 'public' -Pu -OQUs -m IF-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'switch-test':'161' ifInMulticastPkts.1 ifOutMulticastPkts.1 ifInBroadcastPkts.1 ifOutBroadcastPkts.1 ifHCInOctets.1 ifHCOutOctets.1 ifHCInUcastPkts.1 ifHCOutUcastPkts.1 ifHCInMulticastPkts.1 ifHCOutMulticastPkts.1 ifHCInBroadcastPkts.1 ifHCOutBroadcastPkts.1 ifInOctets.1 ifOutOctets.1 ifInUcastPkts.1 ifOutUcastPkts.1 ifInNUcastPkts.1 ifOutNUcastPkts.1 ifInDiscards.1 ifOutDiscards.1 ifInErrors.1 ifOutErrors.1 ifInUnknownProtos.1 ifMtu.1 ifSpeed.1 ifPhysAddress.1 ifAdminStatus.1 ifLastChange.1 ifPromiscuousMode.1 ifConnectorPresent.1 From here onward there is no SNMP response from the switch, the SYS LED stops blinking and is frozen in whichever state it was, and there is no network connectivity to the switch (does not respond to ping and the management interface is inaccessible). The dumb switch hardware was still working for some time, but this was inconsistent, some switches have frozen to a complete halt some time after, while others were still working as dumb switches. As these are under constant load we didn't had the time to more thoroughly investigate on them, we restored their functionality and disabled them in Observium. We have one extra hardware that we can put online for testing if needed. My questions would be: - Should I include a full debug log or the above info is enough? - Has anyone met the same problem/has a solution to it? - Can we know what was changed on the above command line, so maybe as a workaround we can disable that single feature? - I suspect this is a firmware issue, but I am not sure (that's why I'm asking here first, here I have way bigger chances to receive meaningful answers compared to Tp-Link's support), maybe somebody can help me narrow down the firmware bug if it is really one. Thank you guys in advance. Best regards, Tylla

2 1

Power Outage
by Ricardo Franco Cantero 06 Sep '18

06 Sep '18

Hi, What would be the best way to measure for a power outage? I see that there is a sensor for voltage. Would a Min Warn value trigger it on time to send a alert? Met vriendelijke groet, Ricardo Franco Cantero

3 2

Alert my customers
by Ricardo Franco Cantero 05 Sep '18

05 Sep '18

Hi, We monitor our clients through Observium. I wanted to know how I can add individual alert contacts so when a connection of a customer goes down, it sends an alert to us but also directly to the client who's affected. Met vriendelijke groet, Ricardo Franco Cantero

2 1

Association Ruleset
by Ricardo Franco Cantero 05 Sep '18

05 Sep '18

Hi, When I add an alert checker, now I need to add an Association Ruleset. It didn't used to ask for one and I can't seem to find the option to select all, like with the * How do I achieve this? Met vriendelijke groet, Ricardo Franco Cantero

2 1

BGP prefixes graphs not in menus anymore.
by Erwin Botas 05 Sep '18

05 Sep '18

Hi, I’m using professional version and in the latest version, I lost the option to visualize the BGP prefixes, anybody has the same issue? On the poller logs the information is still there. Regards, Erwin Erwin Botas Gerente infraestructura [http://www.criticalcolocation.com/firma/logo.jpg] Tel.: +506 2010-5050 • Cel.: +506 8982-4885 • Fax.: +506 2223-7055 San José, CR • www.criticalcolocation.com [http://www.criticalcolocation.com/firma/line.jpg] NOTA DE CONFIDENCIALIDAD: "La información contenida en este mensaje y sus adjuntos es estrictamente confidencial y se dirige exclusivamente a su destinatario. Si usted no es el destinatario indicado, cualquier divulgación, copia, distribución o uso del contenido de este documento es prohibido y será sancionado de acuerdo con la ley. Si recibió este mensaje por error, debe notificarlo de inmediato al remitente y destruirlo".

3 4

New Observium CE 18.9
by Adam Armstrong 05 Sep '18

05 Sep '18

We've just released the new version of Observium CE, 18.9. This release is based on SVN revision 9411 and includes 552 separate commits covering ~50k changed lines of code since the previous release. The new release can be downloaded from http://www.observium.org and upgrade instructions are at http://www.observium.org/docs/updating/#upgrade-to-latest-major-release Changelogs are : https://docs.observium.org/changelog/ http://www.observium.org/svn.log Thanks, adam.

7 15

How do you configure Internet traffic Today
by Thomas Steffensen 04 Sep '18

04 Sep '18

Hi, I am not sure if this is the right forum but I need some help with basic settings in Observium. I admit I have very little experience with Observium but a great deal with Solarwinds and The Dude (Mikrotik). On my main dashboard window I have a tab saying Internet Traffic Today. This monitors ports to the internet. However, we have replaced some border router and therefor I need to change which ports are being monitored and I can't seem to figure out where I change this? Can I do this in GUI? [cid:image001.png@01D43E26.016A2580] Med venligst hilsen, Thomas Steffensen Network Administrator Parknet | Esromgade 15, opgang 1, 5. sal | 2200 København N | Phone +45 3690 6000 Mobil +45 4265 0504 | www.parknet.dk<http://www.parknet.dk/>

4 19

Application Alert Checker
by Samuel Werneck 04 Sep '18

04 Sep '18

Hi, I have a server running the unix agent and the postgresql module. Is it possible to create an alert checker based on the postgresql app data? Something like... if the "connection count" is below X, than generate an alert Thanks, -- Samuel Werneck

1 0

status_type
by Jacek.Dabrowski＠selgros.pl 01 Sep '18

01 Sep '18

Hello, I trying to create a list of recent battery replacements based on poller module status [cid:image002.jpg@01D4422F.F8DAC510] I create alert check: [cid:image007.jpg@01D4422F.F8DAC510] But checker catches all Status Indicators, what am I doing wrong ? [cid:image008.jpg@01D4422F.F8DAC510] Pozdrawiam Jacek Dąbrowski

2 3