- observium - lists.observium.org

Expanded Eaton UPS Support - xupsEnvironment
by Mailing Lists 11 May '18

11 May '18

Hi, Would it be possible to expand the Eaton UPS monitoring support to include the contact sensors contained within 'xupsEnvironment' so we can alert on the open/closed state of the sensors? The device does appear to provide this information through SNMP (sensor 'type', 'status' and 'name' it's just not captured by Observium as best as I can tell. I can provide SNMP outputs, or possibly access to the device, as required to assist with this request Many Thanks, Tim C

3 3

Upgrading
by Joe Brouillette 11 May '18

11 May '18

Hey all, I can't seem to figure out how to upgrade my Observium to the new revision. I tried svn update but that didn't work. Per the Upgrading the Subscription Edition web page I tried svn update -r 18.5.9221 and when that failed tried svn update -r 9221 but that failed too. I was going to download the new installer but I didn't want to overwrite my current installation. So how do I upgrade my current Observium install? Thanks, Joe Brouillette IT Specialist 509.664.7643 jobee(a)linktransit.com<mailto:jobee@linktransit.com> [cid:image001.jpg@01D3E924.7DD8EFE0]

2 2

blank window
by Raimundas Šlepikas 11 May '18

11 May '18

Hi, i tried on few different PC, blank windows apears randomly. Any ideas please ? -- UAB "Kauno internetos sistemos' R.

4 3

New Iconset
by Klimek, Denis 11 May '18

11 May '18

Hi all, we've just updated this morning to the latest version 18.5.9221 (10th May 2018) and see that the iconset has changed. It looks very strange... ports are now using a Yellow ! Attention, Profil Menue (right top) a temperature icon, BGP Icon is now a paper clip?! Are you sure you want to keep them? They look so mismatched in Observium. Is there any way to get the old iconset back? They looked much much more better than the current one :/ Mit freundlichem Gruß Stadtwerke Norderstedt Denis Klimek Professional Network Engineer IP-Systemtechnik Tel: 040 / 521 04 - 1049 Mobil: 0151 / 652 219 06 dklimek(a)stadtwerke-norderstedt.de<mailto:dklimek@stadtwerke-norderstedt.de> www.stadtwerke-norderstedt.de<http://www.stadtwerke-norderstedt.de/>

4 4

Re: [Observium] New Iconset
by Mike Stupalov 11 May '18

11 May '18

Hi, please refresh page one more time :P > Klimek, Denis <mailto:DKlimek@Stadtwerke-Norderstedt.de> > 11 May 2018 at 09:31 > > Hi all, > > we’ve just updated this morning to the latest version 18.5.9221 (10th > May 2018) and see that the iconset has changed. > > It looks very strange… ports are now using a Yellow ! Attention, > Profil Menue (right top) a temperature icon, BGP Icon is now a paper > clip?! > > Are you sure you want to keep them? They look so mismatched in > Observium. Is there any way to get the old iconset back? They looked > much much more better than the current one :/ > > Mit freundlichem Gruß > > Stadtwerke Norderstedt > > *Denis Klimek* > > Professional Network Engineer > > IP-Systemtechnik > > Tel: 040 / 521 04 – 1049 > > Mobil: 0151 / 652 219 06 > > dklimek(a)stadtwerke-norderstedt.de > <mailto:dklimek@stadtwerke-norderstedt.de> > > www.stadtwerke-norderstedt.de <http://www.stadtwerke-norderstedt.de/> > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov Observium Limited, http://observium.org

1 0

LDP Neighbors, Syslog rules severity and program matching
by Jason Neighbors 10 May '18

10 May '18

Hi, We've been running r9073 (2018-03) for a month now and it has turned out to be a great addition to our environment. I was wondering if there are any plans to add support for MPLS LDP neighbor info in the routing pages? That is something we wouldn't mind paying a bit for. Also, regarding syslog rules, my rules to alert on message matches work great but I couldn't find mention in the doc examples of matching on severity or program name. Is it possible? Thank you. --- Jason Neighbors

2 2

SENAO (Engenius) support for dual band products
by Serge Caron 09 May '18

09 May '18

Greetings! Quote from Adam : "The archives died during a server move, and the mailing list software is voodoo, so they never came back". Apologies for asking something that is probably old news. The Community Edition ships with Senao (Engenius) MIBs dated 2013.11.25. This is fine for older devices such as the EAP9550 and we get proper data (such as number of wireless clients). However, it seems all modern dual band devices such as the (older) EAP600 and the (newer) ECB1750 always report 1 as the number of wireless clients (as well as other broken stats). Are there updated MIBs compatible to observium for these products? Regards, Serge Caron

4 6

Corporate authentication process - questions
by Jan Horacek 08 May '18

08 May '18

Hello gents, I need your advice if anybody of you were integrating Observium to corporate authentication processes? In our company is authentication driven by SAML or oAuth which I don`t see as supported in Observium documentation and need to get help if possible how to integrate Observium to SAML or to oAUTH process. Question is also going to Adam and developers as we are using professional license. I`ll appreciate any hints or guides. Thanks Jan

4 8

exporting info to grafana dashboard
by Edvinas K 08 May '18

08 May '18

Hello, We need to reuse Observium data and to draw a interface traffic graphs in Grafana dashboard. Since Observium doesnt support exportation to Influxdb - is there are any other ways to export to Grafana Board ? Thanks

2 2

[Question] Is possible add MIBs?
by San Rollheiser 07 May '18

07 May '18

Hi, how are you? Only have a one question, on the site of Ubiquiti have a Custom MiBs for AirFiber i possible add this MiBs in Observium? I think this MIB have more addition info about the AirFiber Status. BR Santiago

5 11

Performance issue
by todevnull＠free.fr 05 May '18

05 May '18

Hello all, After a long period of test, i'm putting in production this great software in my company. The server is quite good generaly in term of performance except for the disks ... According to the fact that a polling task shouldn't exceed 5 min, i'm in some trouble ... :-/ A polling session (not the first one), needs 25min to be completed :_( Except the fact that i should optimize my rrd storage, is there is some particular settings for such installation ? Thanks in advance for your help. Tarik. 2x intel xeon X5650 (total of 24 threads), 24GB of RAM, RAID 5 logical drive with 3x15k disks

6 15

Linux detected as engenius wifi
by Marcelo Roccasalva 04 May '18

04 May '18

Hi, I running Observium CE 0.14.11.6000 (docker). I have 50 devices, half of them are Linux CentOS 6 and 7 and suddenly they appear as: Linux blh1 2.6.32-573.26.1.el6.x86_64 #1 SMP Wed May 4 00:57:44 UTC 2016 x86_64 Operating System EnGenius Access Point "blh1" Any help appreciated... -- Marcelo "¿No será acaso que esta vida moderna está teniendo más de moderna que de vida?" (Mafalda)

2 1

Customizing Login screen
by mal＠platinumnetworks.com.au 04 May '18

04 May '18

Adam - I run the subscription edition. Do you have any problems if I customise the login page and replace the hamster with our company logo? Thanks Mal

4 4

Professional Query
by Duncan Mooi 03 May '18

03 May '18

Hi, Is it possible to get a trial copy of Professional before purchasing, we would like to test it fully before committing.. Regards, DM

3 2

Generate Monthly report
by Haryanto Jayusman 03 May '18

03 May '18

Hi, Where is the feature on Community Edition for : The ability to view a weekly/monthly report of information from specific devices. The ability to report: -Traffic -Errors -Device Up/Downs -High Mem/CPU Email reports each week/month.

2 1

Anybody else see this article about observium from ITWorld
by Sam Jones 02 May '18

02 May '18

https://www.itworld.com/article/3269279/network-monitoring/review-observium… Disagree with most of the cons! *Sam Jones *

3 2

Most up to date API Documentation
by Stephan Roy 01 May '18

01 May '18

Hi, We’ve recently purchased Observium to automate how we collect bandwidth usage data for billing our clients. By luck, I was able to find the /api/v0/bills endpoint which does not exist in the documentation at http://docs.observium.org/api/. After seeing that I’m wondering if there are other undocumented endpoints, or query parameters that could be useful. Does anyone have access to the most recent API doc that they could send me or point me towards? Thanks, Steph

1 0

Problem with the new CLICKATELL API
by Eric LESIGNE 01 May '18

01 May '18

Hello, Clickatell's SMS notification service has changed its API mode. The configuration in OBSERVIUM no longer allows to use to send SMS on the new platform. On the Clickatell site the configuration of the old API mode is no longer accessible. I'm looking for a solution so that it can work with the new API mode. The new mode of operation: https://platform.clickatell.com/messages/http/send?apiKey=xxxxxxxxxxxxxxxx=… <https://platform.clickatell.com/messages/http/send?apiKey=xxxxxxxxxxxxxxxx=…> Instead of: https: //api.clickatell.com <http://api.clickatell.com/>&/http/sendmsg user = password = xxxx xxxx xxxx = api_id & to = & text = xxxx xxxx? Thank you for your help.

2 3

Graph Interpretation Questions
by TLee 27 Apr '18

27 Apr '18

Good morning/ evening! I have a complete Ovservium noob question to ask that i am a little embarrassed to ask, but i’m biting the bullet! Currently running the subscription edition on a CentOS install - everything patched and current as of yesterday. My question is about the graphs. I have attached a pic of a graph from a single port on a cisco switch - and i am interesred in the ‘In’ traffic —> there is a single, green, ‘in’ reference in the legend, but there are three distinct green indicators in the graph —> which one actually correllates to ‘In’, and why are there multiples. Thanks! TL Sent from encrypted [ProtonMail](https://protonmail.ch). Sent from ProtonMail Mobile

2 1

observium graph not showing anything
by Nicholas 27 Apr '18

27 Apr '18

Hi, Good day. I have problem with my observium graph not showing anything. I aldi make sure the config.php does not have empty line, tried switching browser, give permission to rrd folder. but it still not showing anything. My /opt/observium/logs does not give any error. May I know how may I trobleshoot this? Attached is some information from my observium server. My setup is on centos7 and my monitoring device is a windows 10 latop. Also, in graph 2, the timing in the filter and the timing in the graph is different. (refer to graph2.jpg) I did perform time modification after setup observium and the time on the graph did changed to the correct time. But the filter is showing different time. I try remove the observium folder, and reunpack, drop database and recreate the database. Still the result is the same. I wonder if this is the reason the graph is not working. Really appreciate if anyone can help out on this. -- Thank you. Regards, Nicholas

1 0

Change in license and user
by Carlos Alvarado Lobo 26 Apr '18

26 Apr '18

Hi all, - In a Pro subscription, can the license username and email user be changed? I need to deliver the license to third party with their credentials! - How can I purchase 3 years of updates? I need to deliver 3 years of updates for a project! or I have to purchase it year by year! Thanks! Carlos

1 0

alert check
by Arnoldo Vidal Bravo 26 Apr '18

26 Apr '18

Hi, we have an alert check of a port state, but iftype can be ethernetCsmacd or gigabitEthernet How I can create an alert with these condition? Entity-> ifType equals ethernetCsmacd or gigabitEthernet ??? Port is enabled, but operationally down Port ifAdminStatus equals upifOperStatus notequals up ALL * ifType equals ethernetCsmacd -- Saluda cordialmente

2 1

Syslog rules
by Rami Kytölä 26 Apr '18

26 Apr '18

Hi, Is there a way to get Syslog rules/alerts to work? Syslogs are configured and are populating database: [cid:image001.png@01D3DCB8.A9247BB0] Syslogs are also linked to correct devices with correct priorities. We have set-up few rules: [cid:image002.png@01D3DCB8.A9247BB0] But if I try with our test rule: [cid:image003.png@01D3DCB8.A9247BB0] Then if I search from the syslog: [cid:image004.png@01D3DCB8.E2C65BE0] --------------------------------------------------- Ramiky -----------------------------------------------------

3 7

Professional Edition Subcription
by Carlos Alvarado Lobo 25 Apr '18

25 Apr '18

Hi all! I have a Community Edition installed, and I purchased a Professional License. Can I upgrade the community edition in a testing installation?? and then install the license in the production installation? the testing and production installations are in different hardware! We need to made testing with notification before put on production! Thanks in advance. Carlos Alvarado

3 2

Re: [Observium] cisco c3850 sensor warnings
by Adam Armstrong 25 Apr '18

25 Apr '18

Hi, These sensors are all below the "low warning" threshold. These thresholds should be set automatically by the switch, but Cisco sometimes drop the ball on this (and then hit it with a brick just to be sure). The first sensor's low warning threshold is 31C, whereas the current value is 19C, which is below that. You can manually set the thresholds for these entries in the devices's settings on the "sensors" tab. adam. ------ Original Message ------ From: "Wiethoff, Helge" <Helge.Wiethoff(a)thga.de> To: "observium(a)observium.org" <observium(a)observium.org> Sent: 2018-04-24 09:49:18 Subject: [Observium] cisco c3850 sensor warnings >Hi everyone, > >I have a small problem with our Cisco WS-C3850-24T-E switches. The >temperature sensors are marked "down" in the overview and "warning" in >the >detail view. >The actual values do not indicate a problem with the temperature. We >use >Observium Professional r9195. > >Does anyone have any idea why the sensors are marked this way and how I >can >get them into "Up"-state? > > >cheers, >Helge

2 1