- observium - lists.observium.org

SNMP not working in fedora 22
by Vikas Kumar 27 Oct '17

27 Oct '17

i have installed net-snmp in fedora 22 and here is my config at /etc/snmp/snmpd.conf When i do snmpwalk or snmpget on host it displays correct reults but when i try to add device in observium it says device timeout please help When i use the same snmp configuration file in ubuntu 16.04 i am able to add device in observium ############################################################################### # # EXAMPLE.conf: # An example configuration file for configuring the Net-SNMP agent ('snmpd') # See the 'snmpd.conf(5)' man page for details # # Some entries are deliberately commented out, and will need to be explicitly activated # ############################################################################### # # AGENT BEHAVIOUR # # Listen for connections from the local system only #agentAddress udp:127.0.0.1:161 # Listen for connections on all interfaces (both IPv4 *and* IPv6) agentAddress udp:161,udp6:[::1]:161 ############################################################################### # # SNMPv3 AUTHENTICATION # # Note that these particular settings don't actually belong here. # They should be copied to the file /var/lib/snmp/snmpd.conf # and the passwords changed, before being uncommented in that file *only*. # Then restart the agent # createUser authOnlyUser MD5 "remember to change this password" # createUser authPrivUser SHA "remember to change this one too" DES # createUser internalUser MD5 "this is only ever used internally, but still change the password" # If you also change the usernames (which might be sensible), # then remember to update the other occurances in this example config file to match. ############################################################################### # # ACCESS CONTROL # # system + hrSystem groups only view systemonly included .1.3.6.1.2.1.1 view systemonly included .1.3.6.1.2.1.25.1 # Full access from the local host #rocommunity public localhost # Default access to basic system info rocommunity iitb default # -V systemonly # rocommunity6 is for IPv6 rocommunity6 public default -V systemonly # Full access from an example network # Adjust this network address to match your local # settings, change the community string, # and check the 'agentAddress' setting above #rocommunity secret 10.0.0.0/16 # Full read-only access for SNMPv3 rouser authOnlyUser # Full write access for encrypted requests # Remember to activate the 'createUser' lines above #rwuser authPrivUser priv # It's no longer typically necessary to use the full 'com2sec/group/access' configuration # r[ow]user and r[ow]community, together with suitable views, should cover most requirements ############################################################################### # # SYSTEM INFORMATION # # Note that setting these values here, results in the corresponding MIB objects being 'read-only' # See snmpd.conf(5) for more details sysLocation Ubuntu 16.04 Test VM in Server sysContact Vikas Kumar<vikask(a)iitb.ac.in> # Application + End-to-End layers sysServices 72 # # Process Monitoring # # At least one 'mountd' process proc mountd # No more than 4 'ntalkd' processes - 0 is OK proc ntalkd 4 # At least one 'sendmail' process, but no more than 10 proc sendmail 10 1 # Walk the UCD-SNMP-MIB::prTable to see the resulting output # Note that this table will be empty if there are no "proc" entries in the snmpd.conf file # # Disk Monitoring # # 10MBs required on root disk, 5% free on /var, 10% free on all other disks disk / 10000 disk /var 5% includeAllDisks 10% # Walk the UCD-SNMP-MIB::dskTable to see the resulting output # Note that this table will be empty if there are no "disk" entries in the snmpd.conf file # # System Load # # Unacceptable 1-, 5-, and 15-minute load averages load 12 10 5 # Walk the UCD-SNMP-MIB::laTable to see the resulting output # Note that this table *will* be populated, even without a "load" entry in the snmpd.conf file ############################################################################### # # ACTIVE MONITORING # # send SNMPv1 traps trapsink localhost public # send SNMPv2c traps #trap2sink localhost public # send SNMPv2c INFORMs #informsink localhost public # Note that you typically only want *one* of these three lines # Uncommenting two (or all three) will result in multiple copies of each notification. # # Event MIB - automatically generate alerts # # Remember to activate the 'createUser' lines above iquerySecName internalUser rouser internalUser # generate traps on UCD error conditions defaultMonitors yes # generate traps on linkUp/Down linkUpDownNotifications yes ############################################################################### # # EXTENDING THE AGENT # # # Arbitrary extension commands # extend test1 /bin/echo Hello, world! extend-sh test2 echo Hello, world! ; echo Hi there ; exit 35 #extend-sh test3 /bin/sh /tmp/shtest # Note that this last entry requires the script '/tmp/shtest' to be created first, # containing the same three shell commands, before the line is uncommented # Walk the NET-SNMP-EXTEND-MIB tables (nsExtendConfigTable, nsExtendOutput1Table # and nsExtendOutput2Table) to see the resulting output # Note that the "extend" directive supercedes the previous "exec" and "sh" directives # However, walking the UCD-SNMP-MIB::extTable should still returns the same output, # as well as the fuller results in the above tables. # # "Pass-through" MIB extension command # #pass .1.3.6.1.4.1.8072.2.255 /bin/sh PREFIX/local/passtest #pass .1.3.6.1.4.1.8072.2.255 /usr/bin/perl PREFIX/local/passtest.pl # Note that this requires one of the two 'passtest' scripts to be installed first, # before the appropriate line is uncommented. # These scripts can be found in the 'local' directory of the source distribution, # and are not installed automatically. # Walk the NET-SNMP-PASS-MIB::netSnmpPassExamples subtree to see the resulting output # # AgentX Sub-agents # # Run as an AgentX master agent master agentx # Listen for network connections (from localhost) # rather than the default named socket /var/agentx/master #agentXSocket tcp:localhost:705 -- <http://moodi.org/> *Vikas Kumar | ** Hospitality & PR Coordinator* *Mood Indigo, IIT Bombay* *+91-9694532954 | mailvikasnow(a)gmail.com <mailvikasnow(a)gmail.com>* [image: Facebook] <https://www.facebook.com/vikas.cse.iitb> ‌ <https://mailtrack.io/> Sent with Mailtrack <https://chrome.google.com/webstore/detail/mailtrack-for-gmail-inbox/ndnaehg…>

1 0

Re: [Observium] Notifications not working
by Robert Martinez 27 Oct '17

27 Oct '17

Suddenly = 4 days ago, notifiers issue detected yesterday No changes in configs, just rolling upgrades applied config.php // Set up a default alerter (email to a single address) // Alerting $config['email']['default'] = "suddenly(a)suddenly.suddenly"; ## Default alert recipient $config['email']['from'] = "Observium <observium@xxxx>"; $config['email']['default_only'] = FALSE; ## Only use default recipient $config['email']['enable'] = TRUE; ## Enable email alerts $config['email']['backend'] = 'smtp'; array*(*14 enable*=>*true from*=>*Observium <observium@xxxx> default*=>*suddenly(a)suddenly.suddenly default_only*=>*false graphs*=>*true backend*=>*smtp sendmail_path*=>*/usr/sbin/sendmail smtp_host*=>*localhost smtp_port*=>*25 smtp_timeout*=>*10 smtp_secure*=>*null smtp_auth*=>*false smtp_username*=>*null smtp_password*=>*null*)* *DEBUG!CMD[/usr/bin/svn info /opt/observium]CMD EXITCODE[0]CMD RUNTIME[0.0067s]STDOUT[Path: .Working Copy Root Path: /opt/observiumURL: http://svn.observium.org/svn/observium/trunk <http://svn.observium.org/svn/observium/trunk>Relative URL: ^/observium/trunkRepository Root: http://svn.observium.org/svn <http://svn.observium.org/svn>Repository UUID: 61d68cd4-352d-0410-923a-c4978735b2b8Revision: 8927Node Kind: directorySchedule: normalLast Changed Author: adamaLast Changed Rev: 8927Last Changed Date: 2017-10-25 11:13:20 +0200 (Wed, 25 Oct 2017)* If you need more debug, please point what you need and I'll provide you Thanks in advance

1 0

Re: [Observium] Cisco ASA 9.4(3)6 Remote Access Sessions
by Stef Renders 27 Oct '17

27 Oct '17

CISCO-REMOTE-ACCESS-MONITOR-MIB::crasEmailNumSessions.0 = Gauge32: 0 Sessions CISCO-REMOTE-ACCESS-MONITOR-MIB::crasIPSecNumSessions.0 = Gauge32: 0 Sessions CISCO-REMOTE-ACCESS-MONITOR-MIB::crasL2LNumSessions.0 = Gauge32: 1 Sessions CISCO-REMOTE-ACCESS-MONITOR-MIB::crasLBNumSessions.0 = Gauge32: 0 Sessions CISCO-REMOTE-ACCESS-MONITOR-MIB::crasSVCNumSessions.0 = Gauge32: 64 Sessions Red is actual anyconnect users, green is site-to-sites, the sslvpn/anyconnect user graph seems to be hidden by the wall of clientless vpn (which is the exact negative amount of sslvpn users) Stef Renders Cloud Network Engineer E <mailto:stef.renders@arxus.eu> stef.renders(a)arxus.eu <http://www.arxus.eu/> T +32 3 450 67 89 <http://www.arxus.eu/> www.arxus.eu P 'Be green, keep it on the screen. Please think before you print this e-mail. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: woensdag 25 oktober 2017 12:03 To: observium(a)observium.org <mailto:observium@observium.org> Subject: Re: [Observium] Cisco ASA 9.4(3)6 Remote Access Sessions Err i mean : snmpwalk -v2c -c <COMMUNITY> -M mibs/rfc:mibs/cisco -m CISCO-REMOTE-ACCESS-MONITOR-MIB <HOSTNAME> crasEmailNumSessions.0 crasIPSecNumSessions.0 crasL2LNumSessions.0 crasLBNumSessions.0 crasSVCNumSessions.0 crasWebvpnNumSessions.0 Changing the hostname and community. adam. On 2017-10-25 11:02:44, Adam Armstrong < <mailto:adama@observium.org> adama(a)observium.org> wrote: Check the returned data on these devices: snmpwalk -v2c -c public -M mibs/rfc:mibs/cisco -m CISCO-REMOTE-ACCESS-MONITOR-MIB crasEmailNumSessions.0 crasIPSecNumSessions.0 crasL2LNumSessions.0 crasLBNumSessions.0 crasSVCNumSessions.0 crasWebvpnNumSessions.0 (from inside the observium dir) adam. On 2017-10-20 10:41:52, Storer, Darren < <mailto:darren.storer@gmail.com> darren.storer(a)gmail.com> wrote: Hi Stef, Did you manage to resolve the ASA VPN session issue mentioned back in March? The graph below is for AnyConnect (SSL) VPN sessions but seems to display correctly as "Clientless". Thanks for any advice Darren On 15 March 2017 at 08:34, Stef Renders < <mailto:stef.renders@cronos.be> stef.renders(a)cronos.be> wrote: Dear Just FYI This started occurring after 9.4.3 release, and still present as of 9.7.1 All releases pre-9.4.3 do not seem to have this issue, and correctly report 0 clientless vpn (when only using anyconnect sslvpn) Kind regards From: observium [mailto: <mailto:observium-bounces@observium.org> observium-bounces(a)observium.org] On Behalf Of Richard Reitenauer Sent: dinsdag 14 maart 2017 19:43 To: <mailto:observium@observium.org> observium(a)observium.org Subject: [Observium] Cisco ASA 9.4(3)6 Remote Access Sessions I am currently using the latest community edition and looking to go to the professional subscription. With a Cisco ASA 9.4(3)6 and graphing the Remote Access Sessions, I am seeing odd data and it looks like others have had the same issue for a couple years now. I attached a screenshot of what I am seeing. >From Cisco CLI – show vpn-sessiondb anyconnect summary: VPN Session Summary --------------------------------------------------------------------------- Active : Cumulative : Peak Concur : Inactive ---------------------------------------------- AnyConnect Client : 96 : 8582 : 101 : 3 SSL/TLS/DTLS : 96 : 8582 : 101 : 3 >From Observium interface snapshot is attached. Is there any fix for this? Also, can we graph per anyconnect group? Thanks, Rich Reitenauer Sr. Infrastructure Analyst 1 Meridian Blvd, Suite 2C01 Wyomissing, PA 19610 O: 610-373-7999 x1255 <mailto:rreitenauer@ugies.com> rreitenauer(a)ugies.com _______________________________________________ observium mailing list <mailto:observium@observium.org> observium(a)observium.org <https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fpostman.m…> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list <mailto:observium@observium.org> observium(a)observium.org <http://postman.memetic.org/cgi-bin/mailman/listinfo/observium> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

4 3

IPsec tunnel monitor question
by Satish Patel 26 Oct '17

26 Oct '17

we have multiple tunnel on ASA which we are monitoring using observium but in graph its just showing number of Active tunnel is there anyway we can have number of tunnel by IP or peer name so we configure alert if any one of tunnel down and take some action

3 2

[Feature Request] F5 LTM Virtual Server bandwidth reports
by Brian Hostetler 26 Oct '17

26 Oct '17

Any plans to add bandwidth reporting for F5 LTM virtual servers (VS)? For companies with customers using a dedicated VS, this would be a really nice feature, rather than using a pooled port for reporting. Brian

1 0

Notifications not working
by Robert Martinez 26 Oct '17

26 Oct '17

Hello, suddenly notifications stop working at all. No e-mail or Slack transit notifiers work xxxx@xxxxx:/opt/observium$ sudo ./test_alert.php -a 11569 Observium 17.10.8927 Test Alert Notification ##### Software versions ##### o OS Linux 4.4.0-97-generic [amd64] (Ubuntu 16.04) o Apache 2.4.18 o PHP 7.0.22-0ubuntu0.16.04.1 (OPcache: ENABLED) o Python 2.7.12 o MySQL 5.7.20-0ubuntu0.16.04.1 (extension: mysqli 5.0.12-dev) o SNMP NET-SNMP 5.7.3 o RRDtool 1.5.5 ##### Memory Limit ##### o PHP Unlimited ##### MySQL mode ##### o MySQL NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION ##### Charset info ##### o PHP UTF-8 o MySQL utf8 ##### Timezones info ##### o Date Thursday, 26-Oct-17 13:13:45 CEST o PHP +02:00 o MySQL +02:00 o Queueing Notification [81049] o Queueing Notification [81050] With debug flag a lot of these till reach the value Queueing Notification [81050] SQL[SELECT * FROM `notifications_queue` WHERE 1] SQL RUNTIME[0.22802496s] SQL[SELECT `notification_locked` FROM `notifications_queue` WHERE `notification_id` = '5309'] SQL RUNTIME[0.00024700s] SQL[SELECT `notification_locked` FROM `notifications_queue` WHERE `notification_id` = '5310'] SQL RUNTIME[0.00008702s] SQL[SELECT `notification_locked` FROM `notifications_queue` WHERE `notification_id` = '5311'] SQL RUNTIME[0.00007796s] SQL[SELECT `notification_locked` FROM `notifications_queue` WHERE `notification_id` = '5312'] SQL RUNTIME[0.00007796s] Any ideas? Best Regards, Robert

2 1

APC Environmental Bars no longer displaying Health Graphs
by Observium 26 Oct '17

26 Oct '17

Hi all, We have 2 APC environmental management agents which we've been using to monitoring temperature and humidity. We've upgraded to 17.9.8829 (stable) this morning, however the logo for each of these devices has changed to NetBotz, instead of the normal APC one. We've lost all health related graphs, temperature/humidity probes, and all related historic data. The event log lists each of the sensor probes being deleted from the system about 7 hours after the upgrade. Other than the upgrade we've made no changes to the system. We've since rebooted each device, and even deleted and re-added one to see if the ports will get re-polled, but no luck. Anyone else experiencing anything similar? As always, any help is most appreciated J Kind regards, Alex

6 16

Groups naming
by Youssef BENGELLOUN - ZAHR 26 Oct '17

26 Oct '17

4 5

Copy module properties between devices
by Jason Lixfeld 25 Oct '17

25 Oct '17

Hey there, Is there perhaps a knob that can be used to copy device properties from Device > Properties > Modules from one device to another, or better yet, if I create a group of devices, can I have all members of the group inherit the same properties? I’ve looked through the GUI and also through the available CLI scripts looking for some clues, but haven’t found anything, so perhaps there’s no such ability? Thanks!

2 1

After migration of Observium im getting some "Error Drawing Graph" errors
by Edvinas K 25 Oct '17

25 Oct '17

Hello, After migrating observium with old rrds and mysql db to new machine some graphs shows . I got this info in "RRD Command" Performance & Output RRDTool Output: ERROR: opening '/opt/observium/rrd/jaycore02/processor-cpm-22.rrd': Permission denied RRDtool Runtime: 0.012s | Total time: 0.013s RRDTool Command /usr/bin/rrdtool graph /tmp/Te25azzHxCwBa1eS.png -Y --lower-limit 0 --upper-limit 100 --start 1508859557 --end 1508945947 --width 1152 --height 300 -c BACK#EEEEEE00 -c SHADEA#EEEEEE00 -c SHADEB#EEEEEE00 -c FONT#000000 -c CANVAS#FFFFFF00 -c GRID#a5a5a5 -c MGRID#FF9999 -c FRAME#5e5e5e -c ARROW#5e5e5e -R normal --font LEGEND:8:'DroidSansMono,DejaVuSansMono' --font AXIS:7:'DroidSansMono,DejaVuSansMono' --font-render-mode normal -E DEF:usage=/opt/observium/rrd/jaycore02/processor-cpm-22.rrd:usage:AVERAGE DEF:usage_max=/opt/observium/rrd/jaycore02/processor-cpm-22.rrd:usage:MAX DEF:usage_min=/opt/observium/rrd/jaycore02/processor-cpm-22.rrd:usage:MIN DEF:usageX=/opt/observium/rrd/jaycore02/processor-cpm-22.rrd:usage:AVERAGE:start=1508773167:end=1508859557 DEF:usage_maxX=/opt/observium/rrd/jaycore02/processor-cpm-22.rrd:usage:MAX:start=1508773167:end=1508859557 SHIFT:usageX:86390 SHIFT:usage_maxX:86390 AREA:usage_max#c5c5c5 AREA:usage_min#ffffff COMMENT:'Usage Now Avg Max \n' LINE1.25:usage#cc0000:' ' GPRINT:usage:LAST:"%6.2lf%s" GPRINT:usage:AVERAGE:"%6.2lf%s" GPRINT:usage_max:MAX:"%6.2lf%s"\n COMMENT:\n LINE1.25:usageX#666666:'Prev \n' AREA:usageX#99999966: CDEF:usagesmooth=usage,1800,TREND CDEF:usagepredict=586400,-7,1800,usage,PREDICT LINE1:usagepredict#FF00FF::dashes=3 RRDTool Files Used /opt/observium/rrd/jaycore02/processor-cpm-22.rrd What could i do ? Thanks

2 4

observium Archives
by Brian Hostetler 25 Oct '17

25 Oct '17

Are the archives locked? http://postman.memetic.org/pipermail/observium/ <http://postman.memetic.org/pipermail/observium/> <http://postman.memetic.org/pipermail/observium/> <http://postman.memetic.org/pipermail/observium/> *Forbidden* You don't have permission to access /pipermail/observium/ on this server. ------------------------------ *Apache/2.4.18 (Ubuntu) Server at postman.memetic.org <http://postman.memetic.org> Port 80* Brian

2 1

Status Map
by Kris Kirkland 25 Oct '17

25 Oct '17

Is there any recommendations for a "Status Map" that is more like Nagvis? We are in the process of moving all our alert checks from Icinga to observium and would like a more robust solution than the current overview map for our operations center display. -- Kris Kirkland ~ K5KRK 2B1ASK1 - http://goo.gl/5bU4F0

1 0

Cisco ASA 9.4(3)6 Remote Access Sessions
by Richard Reitenauer 25 Oct '17

25 Oct '17

I am currently using the latest community edition and looking to go to the professional subscription. With a Cisco ASA 9.4(3)6 and graphing the Remote Access Sessions, I am seeing odd data and it looks like others have had the same issue for a couple years now. I attached a screenshot of what I am seeing. >From Cisco CLI - show vpn-sessiondb anyconnect summary: VPN Session Summary --------------------------------------------------------------------------- Active : Cumulative : Peak Concur : Inactive ---------------------------------------------- AnyConnect Client : 96 : 8582 : 101 : 3 SSL/TLS/DTLS : 96 : 8582 : 101 : 3 >From Observium interface snapshot is attached. Is there any fix for this? Also, can we graph per anyconnect group? Thanks, Rich Reitenauer Sr. Infrastructure Analyst 1 Meridian Blvd, Suite 2C01 Wyomissing, PA 19610 O: 610-373-7999 x1255 rreitenauer(a)ugies.com<mailto:rreitenauer@ugies.com>

4 4

Device taking > 5 minutes to poll
by Jason Lixfeld 24 Oct '17

24 Oct '17

Hey all, I’ve got a device (Zhone MXK-F) with over 10,000 ports on it, and Observium is taking well over 5 minutes to poll it (upwards of 15 minutes, actually). While there isn’t a definition specifically for MXK-F, it’s getting detected as MXK. os.inc.php is setting max-rep 50, so it’s at least trying to bulk walk, but I don’t know if it’s actually working. Overriding to max-rep 100 doesn’t have an affect on the polling time. So, I guess my question is whether or not I’m on the right track in assuming that this issue is likely that of bulk walk on this device, or possibly some other issue, and how would I determine one way or the other? If it’s something that I can pinpoint, I can throw it back to the vendor to fix. From the digging I’ve done so far, all other poller processes called from poller-wrapper complete in under 5 minutes, so I’m fairly certain that this issue is one of the device, not Observium. But, to be thorough, I moved my database and RRD storage over to local SSDs, and also enabled rrdcached - all that to ensure I didn’t have any I/O issues. /pollerlog/view=devices indicates that it’s just the one device that has high timing (although other devices of the same type are spots 2-7 on the top 10 list high timers, but none is over 300 seconds except for this guy). root@monitor:/home/jlixfeld# /opt/observium/poller.php -VV Observium 17.9.8837 ##### Software versions ##### o OS Linux 3.16.0-4-amd64 [amd64] (Debian 8 (jessie)) o Apache 2.4.10 o PHP 5.6.30-0+deb8u1 (OPcache: DISABLED) o Python 2.7.9 o MySQL 5.5.55-0+deb8u1 (extension: mysqli 5.5.55) o SNMP NET-SNMP 5.7.2.1 o RRDtool 1.4.8 (rrdcached 1.4.8: unix:/opt/observium/rrdcached.sock) ##### Memory Limit ##### o PHP Unlimited ##### MySQL mode ##### o MySQL ##### Charset info ##### o PHP UTF-8 o MySQL utf8 ##### Timezones info ##### o Date Monday, 02-Oct-17 12:55:15 EDT o PHP -04:00 o MySQL -04:00 root@monitor:/home/jlixfeld# Thanks all!

5 11

Observium migration
by Edvinas K 24 Oct '17

24 Oct '17

Hello, I freshly installed Observer community edition. Now i need to migrate all information from old mashine to new one. I'm ready to move these things from old mashine to newone: 1)RRD Folder 2)Mysql db 3)Weathermap configuration with existing interface number (requirements is that they would be left the same). So everything should be Ok, but i noticed in older mashine i see in config.php the db configuration is without "$config['db_extension'] = 'mysqli';" like in new one. Will it's possible to get any problem because of that ? Thanks.

2 1

Location list cutted
by El Coyote 24 Oct '17

24 Oct '17

Hi all, I've noticed that if you have a lot of locations you can't see all of them because list in menu is not scrollable. I've about 45 locations and I can't see (and select) last 10.. Thanks

1 0

Session lost
by Mirditor Kuçaj 24 Oct '17

24 Oct '17

Hello Weve had for quite some time problems with our Observium logins. We cant stay for more than a few seconds logged in. We have different users each with their own user/pass and the issue is the same to all of them. Realtime port monitoring is impossible because we cant stay logged in for more than 10 seconds as it says: Cant get data about port xx .. and than we have to log in again and again.. Can you help us troubleshoot this problem and fix it? We tried http://jira.observium.org/browse/OBS-748 Observium 17.9.8859 (25th September 2017) OS Linux 2.6.32-573.26.1.el6.x86_64 [amd64] (CentOS 6.7) Apache 2.2.15 (CentOS) PHP 7.0.6 Python 2.6.6 MySQL 5.1.73 (extension: mysqli 5.1.73) SNMP NET-SNMP 5.5 RRDtool 1.3.8 Thx Mirditor Kuçaj Backbone Network Director <mailto:miri@abissnet.al> miri(a)abissnet.al Abissnet Sh.a. +355 69 60 91 364 +355 (0)44 300 003 Ext 139 Rr. Ismail Qemali, Pallati Abissnet, Tiranë <http://www.abissnet.al/> www.abissnet.al <https://www.facebook.com/Abissnet> <https://plus.google.com/u/0/+AbissnetalISP> <https://www.linkedin.com/profile/view?id=AAIAABqLWRAB88ljU6t8b67oVm8PAlvPrh mPybE&trk=nav_responsive_tab_profile%20>

2 3

Graphing OSPF neighbour count?
by Brandwatch NOC 23 Oct '17

23 Oct '17

Hi All, Love Observium, thanks! We had an issue on Friday with an OSPF adjacency; we didn't see it for various reasons and the logs on the device aged out quickly so we don't have a historical on when it came back. We will extend the log depth and possibly ship logs centrally but that doesn't help us on this occasion. This led to me digging around in Observium to see if it had captured the neighbour flapping. The routing tab is great and even shows neighbour count, but it doesn't seem to be graphed (unless I'm overlooking it). Is this something that I could turn on somehow? Many thanks! Chris

2 3

Webhook MS Teams not working
by Epco Dijk 22 Oct '17

22 Oct '17

Hi, I have an alert setup to notify via MS Teams. However it doesn’t arrive. When I run ./test_alert.php -dd -a 327 the webhook gives a 400 Bad Request Testing with the same webhook with curl returns a “1” curl -H "Content-Type: application/json" -d "{\"text\": \"Hello World\"}" https://outlook.office.com/webhook/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 1 [cid:image001.png@01D3435E.E47C3B10] But Observium shows this: SQL RUNTIME[0.00041604s] o Notifying [webhook] Microsoft Teams: {"url":"https:\/\/outlook.office.com\/webhook\/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"} REQUEST[https://outlook.office.com/webhook/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx… REQUEST STATUS[FALSE] REQUEST RUNTIME[0.1904s] RESPONSE CODE[400 Bad Request] RESPONSE[ ] > $http_response_header /opt/observium/includes/common.inc.php:3585 array( [0] => string(24) "HTTP/1.1 400 Bad Request" [1] => string(23) "Cache-Control: no-cache" [2] => string(16) "Pragma: no-cache" [3] => string(18) "Content-Length: 28" [4] => string(39) "Content-Type: text/plain; charset=utf-8" [5] => string(11) "Expires: -1" [6] => string(48) "request-id: xxxxxxxxxxxxxxxxxxxxxxxxxxx" [7] => string(68) "X-CalculatedBETarget: AM5PR0102MB2723.eurprd01.prod.exchangelabs.com" [8] => string(24) "X-BackEndHttpStatus: 400" [9] => string(27) "X-AspNet-Version: 4.0.30319" [10] => string(55) "X-CafeServer: AM5PR0201CA0013.EURPRD02.PROD.OUTLOOK.COM" [11] => string(27) "X-BEServer: AM5PR0102MB2723" [12] => string(21) "X-Powered-By: ASP.NET" [13] => string(27) "X-FEServer: AM5PR0201CA0013" [14] => string(100) "X-MSEdge-Ref: Ref A: XXXXXXXXXX9787B468 Ref B: AMSEDGE0313 Ref C: 2017-10-12T10:38:38Z" [15] => string(35) "Date: Thu, 12 Oct 2017 10:38:38 GMT" [16] => string(17) "Connection: close" ) Epco Dijk Systems Administrator Northpool B.V. 3e Binnenvestgracht 23 N 2312 NR Leiden The Netherlands Tel: +31 (0)88 2400300 Fax: +31 (0)88 2400399 E-mail: epco.dijk(a)northpool.nl Web: www.northpool.nl [Logo Northpool] This message and any attachments (the "message") are confidential and intended solely for the addressees. If you are not the addressee indicated in this message or if this message has been addressed to you by error, you may not copy or deliver this message to anyone but destroy it and kindly notify the sender by reply email. Any unauthorised use or dissemination is prohibited. E-mails are susceptible to alteration. Northpool bv shall not be liable for the message if altered, changed or falsified.

4 11

moving observium from one machine to another
by Edvinas K 20 Oct '17

20 Oct '17

Hello, we're using subscription version of Observium. Time has come to move the Observium from old to new mashine, do is't possible to to just copy /opt/observium from old mashine to new and make it work with all the history of graphs saved. ? Also we're using weathermap, is it possible by doing this way (just moving Observium) to save weathermap interface numbers ? Thanks

2 2

Syslog Integration
by Philippe Hurtubise 20 Oct '17

20 Oct '17

Hi, I am trying to configure syslog integration to send syslog from Windows server to Obeservium. I followed instruction on this page http://docs.observium.org/syslog/. But at the bottom of the page I am not sure what to do. Syslog-ng Make sure these options are set : options { chain_hostnames(0); keep_hostname(1); use_dns(no); }; Use this as destination in syslog-ng.conf, change syslog.php path to match yours source s_net { udp(); }; destination d_observium { program("/opt/observium/syslog.php" template ("$HOST||$FACILITY||$LEVEL_NUM||$LEVEL||$TAG||$YEAR-$MONTH-$DAY $HOUR:$MIN:$SEC||$MSG||$PROGRAM\n") template-escape(yes)); }; log { source(s_net); destination(d_observium); }; Where do I add options mentioned, where is the syslog-ng.conf file and where do I add sources section. Thanks

2 2

Re: [Observium] Webhook MS Teams not working
by Epco Dijk 19 Oct '17

19 Oct '17

Hi Tom, Thanks for your support. I will update my installation and let you know the results. To come back to your earlier question. The MS Teams webhook is indeed a string like this: https://outlook.office.com/webhook/35efe6c3-7319-485a-afd3-1865ffa3c4ed@3b8… I'm a bit struggling with spamfilters and this list to properly receive your replies. I only get a digest. So that's why I reply like this. KR, Epco Message: 8 Date: Thu, 19 Oct 2017 00:39:13 +0200 From: Tom Laermans <tom.laermans(a)powersource.cx> To: observium(a)observium.org Subject: Re: [Observium] Webhook MS Teams not working Message-ID: <e7d7f221-e294-2ba9-32d5-9920bcd86d46(a)powersource.cx> Content-Type: text/plain; charset="windows-1252"; Format="flowed" There's a MS Teams transport in the repository now - not fully tested. Comments welcome! Tom Epco Dijk Systems Administrator Northpool B.V. 3e Binnenvestgracht 23 N 2312 NR Leiden The Netherlands Tel: +31 (0)88 2400300 Fax: +31 (0)88 2400399 E-mail: epco.dijk(a)northpool.nl Web: www.northpool.nl [Logo Northpool] This message and any attachments (the "message") are confidential and intended solely for the addressees. If you are not the addressee indicated in this message or if this message has been addressed to you by error, you may not copy or deliver this message to anyone but destroy it and kindly notify the sender by reply email. Any unauthorised use or dissemination is prohibited. E-mails are susceptible to alteration. Northpool bv shall not be liable for the message if altered, changed or falsified.

1 1

Custom OID Juniper COS queue
by Peter Derissen 18 Oct '17

18 Oct '17

Hi all, Im trying to figure out how to build a custom oid. It doesn't matter how I put the info into the add custom oid fields. It just won't draw a graph and also doesn't give a decent response. Any idea how I should do this? [cid:image001.png@01D34828.D0C54FC0] I found this info on twitter: I use JUNIPER-COS-MIBS. OID : jnxCosQstatQedPkts (1.3.6.1.4.1.2636.3.15.4.1.3.ifindex.queue) for monitor pkts in queue jnxCosQstatQedBytes (1.3.6.1.4.1.2636.3.15.4.1.5.ifindex.queue) for monitor bytes in queue :-) Met vriendelijke groet, Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [EF-logo_rood_RGB -handtekening]<http://www.eurofiber.nl/> Volg ons op Twitter<https://twitter.com/Eurofiber> | Linkedin<https://www.linkedin.com/company/eurofiber> | Youtube<https://www.youtube.com/user/Eurofibergroup> [cid:image002.png@01D225FF.7ECDA420]<http://bit.ly/2eaBgRh> ******** IMPORTANT NOTICE ******** This e-mail (including any attachments) may contain information that is confidential or otherwise protected from disclosure and it is intended only for the addressees. If you are not the intended recipient, please note that any copying, distribution or other use of information contained in this e-mail (and its attachments) is not allowed. If you have received this e-mail in error, kindly notify us immediately by telephone or e-mail and delete the message (including any attachments) from your system. Please note that e-mail messages may contain computer viruses or other defects, may not be accurately replicated on other systems, or may be subject of unauthorized interception or other interference without the knowledge of sender or recipient. Eurofiber only sends and receives e-mails on the basis that Eurofiber is not responsible for any such computer viruses, corruption or other interference or any consequences thereof. Eurofiber Nederland B.V. is registered in the Chamber of Commerce of Amsterdam with number 34134377, VAT number NL 8088.51.524 B01.

3 4

Default values temperature sensors, min/max warnings
by Svensson Fredrik A 18 Oct '17

18 Oct '17

Hi there, where does the default values come from, for example this: [cid:image001.png@01D347F3.7C3B9160] Is it possible to change them, for lets say all my 3650:s, without doing it on every device? Regards Fredrik

2 1

Gettign SVN timeout error
by Josh Bierman 18 Oct '17

18 Oct '17

Hi All, I am getting an error when I go to update. Server sent unexpected return value (408 Request Timeout) in response to OPTIONS request for 'http://svn.observium.org/svn/observium/trunk' I am looking for suggestions on troubleshooting this. I have tried: Making an outgoing rule on the firewall from my Observium server to http://svn.observium.org. Opening outgoing (and therefore, returning) Ports: 80, 443, 21, 22, 8080, 3690 None of that has made a difference. I can ping the svn server from my Observium machine, I can browse to the web page, my login credentials are correct..... ideas? Joshua Bierman

3 5