- observium - lists.observium.org

regexp based on sysName
by Skyler Blumer 17 Oct '17

17 Oct '17

Is there a way to set regex config based on policy or groups? I'd like to do something like .. if (hostname != "example_host"){ $config['bad_ifalias_regexp'][] = "/^$/"; }

1 1

Tables in the Observium DB
by Eric Kollmann 16 Oct '17

16 Oct '17

First, I just took over our install of this, wasn't involved in the initial setup of observium and I understand the piece I'm asking about is not part of observium, just uses the data it collects and I want to verify if structure has changed since it was released or if there is something incorrectly setup with our system. I'm looking to build out graphviz maps with the data observium has gathered, specifically using: https://github.com/kedare/observium_map_generator Going through their code, it queries the db for the links table and fails. Looking at the database I have a neighbours table, but not links. Google search I see links table discussed back in 2014, but nothing much recently. So, did the links table go away in newer versions, or is the fact that the table is missing an issue with our setup? If it is supposed to be there and missing, I'll work on figuring that out next, if it did just go away I just want to verify that. Thanks

4 11

Cisco device hardware name not showing after IOS upgrade
by Youssef BENGELLOUN - ZAHR 16 Oct '17

16 Oct '17

2 8

Re: [Observium] New install, Alert Checker not triggered
by J Green 14 Oct '17

14 Oct '17

Hello there: Just built a new system w/ CE version 17.9 on Centos 7.2 . When I create/run the following Alert Check, it shows as 'OK' for my devices: processor_usage greater 90 * * When I go to a device and view graphs, it shows a device w/ 100% CPU utilization No errors in logs/db.log. Is my syntax incorrect? Thank you.

4 8

Juniper SRX system uptime value
by Youssef BENGELLOUN - ZAHR 12 Oct '17

12 Oct '17

6 22

Monitoring interface flaps and PSU count
by Edvinas K 10 Oct '17

10 Oct '17

Hello, is it possible to create an checker rule to monitor interface FLAPS and Power PSU count ?

1 0

MIB additions
by Tripp Lite 09 Oct '17

09 Oct '17

Hello, I have some newer Tripp Lite products that I have in my network that utilize two additional MIB's in the software. How can I get these added to the platform? The MIB's are TRIPPLITE.MIB and TRIPPLITE-PRODUCTS.MIB Regards, Eric C.

3 6

Alert on package update
by Simon Mousey Smith 08 Oct '17

08 Oct '17

Hi all Not sure if this is possible or maybe a feature request but here we go Is it possible for observium to email on a package update? A few machines auto update for Plesk and would be nice to be notified when they get updated I can see in observium in the Eventlog of the devices Package updated: plesk-php70-fpm (x86_64) from 7.0.23-centos6.17090111 to 7.0.24 Regards Simon

2 2

Bogus alerts since last CE update
by Musall, Maik 06 Oct '17

06 Oct '17

Hi, on Sept 28th I updated one installation to the new CE release (17.9.0). Since then, Observium keeps sending me interface down/up alerts for every single port on every single switch and router, once every day between 11:20 am and 11:35 am (a bunch every 5 minutes). The alerts look like this: They serve to notify me if anyone connects or disconnects something in my absence. That worked well for a year or so, until I did this update. Now I get 114 emails every day at the same time. What could be the cause, and how can I solve that? Maik

3 3

Poller wrapper history stopped working
by Silvio del Val Hinojal 06 Oct '17

06 Oct '17

Hello, We have upgraded Observium from CE to Pro version following upgrade document, we are now running 17.9.8859 (stable) version and, since then, global "Poller Wrapper history" stopped working. Now it shows "- nan" in all fields. This is what it shows now: [cid:image002.png@01D33E9A.3B2E1D80] Any hint? Regards, Silvio [cid:image001.png@01D03B1C.E8E96F80]<http://www.pandasecurity.com/spain/> Silvio del Val Systems Engineer - Panda Security +34 944 343 728 silvio.delval(a)pandasecurity.com<mailto:silvio.delval@pandasecurity.com> pandasecurity.com<http://www.pandasecurity.com/> This e-mail contains confidential information owned by Panda Security. Any such copy, or use, or distribution or disclosure of its contents is strictly forbidden. Please notify us immediately at our phone number (+34 94 425 11 00) if you receive this e-mail and are not its consignee, and then delete this message from your system without copying it, distributing it, or disclosing its contents P Before printing this message, please make sure it is really necessary

2 1

Multiple mailing options
by Franks Andy (IT Technical Architecture Manager) 06 Oct '17

06 Oct '17

Hi all, We have a scenario where we'd like, for certain alerts, to not only send via the default mail settings but also to forward to an external sms portal. This particular portal is fairly simple and works via sending an email to a certain domain with a phone number prefix. We'd need to use different mail settings for this purpose though and I was wondering if someone could think of the best way to do this. I can't really find many examples for the external script or web hook transport methods, and ideally we'd be able to do most of the configuration and filtering directly within observium rather than doing the messaging logic elsewhere. Thanks Andy

2 1

Alarm on VLAN?
by Ryan, Spencer 05 Oct '17

05 Oct '17

Hey Guys, Is there any way to write an alert check to alarm if a VLAN is seen on a port (either access or trunk?). We have a few "untrusted" networks that we want to know if they get stuck on a trunk somewhere they shouldn't be. Thanks! Spencer Ryan | Senior Systems Administrator | sryan(a)arbor.net<mailto:sryan@arbor.net> Arbor Networks +1.734.794.5033 (d) | +1.734.846.2053 (m) www.arbornetworks.com<http://www.arbornetworks.com/>

2 1

syslog not working after observium rsyslog server configuration
by Vikas Kumar 05 Oct '17

05 Oct '17

I have observium CE addition and i recently tried for syslog integration on it as given here http://docs.observium.org/syslog/ I am able to see syslog messages in observium UI but unfortunately my syslog messages of observium machine itself are not getting logged to /var/log/syslog . please some one help me here. These are my configuration files as attached with this post /etc/rsyslog.conf ################# $ModLoad imudp $UDPServerRun 514 module(load="imuxsock") # provides support for local system logging module(load="imklog") # provides kernel logging support #module(load="immark") # provides --MARK-- message capability # provides UDP syslog reception #module(load="imudp") #input(type="imudp" port="514") # provides TCP syslog reception #module(load="imtcp") #input(type="imtcp" port="514") # Enable non-kernel facility klog messages $KLogPermitNonKernelFacility on ########################### #### GLOBAL DIRECTIVES #### ########################### # # Use traditional timestamp format. # To enable high precision timestamps, comment out the following line. # $ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat # Filter duplicated messages $RepeatedMsgReduction on # # Set the default permissions for all log files. # $FileOwner syslog $FileGroup adm $FileCreateMode 0640 $DirCreateMode 0755 $Umask 0022 $PrivDropToUser syslog $PrivDropToGroup syslog # # Where to place spool and state files # $WorkDirectory /var/spool/rsyslog # # Include all config files in /etc/rsyslog.d/ # $IncludeConfig /etc/rsyslog.d/*.conf $DebugFile /var/log/rsyslogdebug.txt $DebugLevel 1 ----------------------------------------------------------------------------------------------------- Another observium config file is located at /etc/rsyslog.d/30-observium.conf at it contains: #--------------------------------------------------------- #send remote logs to observium template(name="observium" type="string" string="%fromhost-ip%||%syslogfacility%||%syslogpriority%||%syslogseverity%||%syslogtag%||%$year%-%$month%-%$day% %timereported:8:25%||%msg%||%programname%\n") $ModLoad omprog Module (load="imudp") # rsyslog Input Modules input(type="imudp" port="514" ruleset="observium") # rsyslog RuleSets ruleset(name="observium") { action(type="omprog" binary="/opt/observium/syslog.php" template="observium") } *.* stop #--------------------------------------------------------- i have added a new line Module (load="imudp") apart from the original given here at http://docs.observium.org/syslog/ But now when i do tail -f /var/log/syslog i get this : Oct 5 15:45:01 testnet-PC CRON[3000]: (root) CMD ( /opt/observium/discovery.php -h new >> /dev/null 2>&1) Oct 5 15:45:01 testnet-PC CRON[3001]: (root) CMD ( /opt/observium/poller-wrapper.py 4 >> /dev/null 2>&1) Oct 5 15:47:19 testnet-PC rsyslogd: [origin software="rsyslogd" swVersion="8.16.0" x-pid="2898" x-info="http://www.rsyslog.com"] exiting on signal 15. and nothing more events are shown here. Please someone help how do i get my usual syslog messages back on observium machine. Thanks Regards, Vikas kumar IIT Bombay India -- <http://moodi.org/> *Vikas Kumar | ** Hospitality & PR Coordinator* *Mood Indigo, IIT Bombay* *+91-9694532954 | mailvikasnow(a)gmail.com <mailvikasnow(a)gmail.com>* [image: Facebook] <https://www.facebook.com/vikas.cse.iitb> <https://mailtrack.io/> Sent with Mailtrack <https://chrome.google.com/webstore/detail/mailtrack-for-gmail-inbox/ndnaehg…>

2 1

Scaling Observium with distributed pollers
by Markus Klock 05 Oct '17

05 Oct '17

Hi guys, I wrote a blogpost on how you can scale Observium to handle ridiculously large deployments, you will find it here: http://blog.best-practice.se/2017/10/scaling-observium-horizontally.html And comments or feedback is most welcome! /Markus

3 3

VPN site-to-site monitoring by name
by Satish Patel 04 Oct '17

04 Oct '17

I have posted on JIRA http://jira.observium.org/browse/OBS-2438 But just wonder if anyone has any solution for this issue, we have many site-to-site tunnel and in observium its just showing count but it would be good if it shows list of tunnel by name so easy to identify down tunnel and alert.

2 3

Graphs not rendering correctly
by Mal Evans 04 Oct '17

04 Oct '17

Hi all, Seem to be having a problem with the graphs on my new install (CE). See the example below: As you can see there are regular gaps in the display. I am wondering if this might have something to do with a polling cycle etc? not sure where to start investigating so any suggestions are welcome. As far as I can tell every graph shows similar behaviour. Cheers Mal

3 4

p2p radio detection
by Joey Stanford 04 Oct '17

04 Oct '17

Howdy, We noticed not that long ago that Ubiquity devices gained p2p radio detection. Is there any consideration for Ubutiks (Ubiquity RF + Microtik routerboard)? We have a number of these and the device_state array contains the p2p radio info just like the Ubiquity radios do. Discovery put the ubutiks into the network category like a normal mikrotik. We’ve been changing them over by hand to wireless for categorization. Thanks, Joey

1 0

Monitor Exchange 2016
by Juan Carlos Rodriguez 03 Oct '17

03 Oct '17

Hello. I am new to observium and I would like to know how can I monitor an exchange 2016 server via WMI?, I can pull regular SNMP data from the server. thanks for your help Juan

1 0

Juniper SRX4200 and transceivers sensors
by Youssef BENGELLOUN - ZAHR 01 Oct '17

01 Oct '17

2 1

Sonus Session Border Controller support
by Ármann Guðjónsson 30 Sep '17

30 Sep '17

Hi Adam Are there any plans to add support for Sonus Session Border Controller ? Best regards Armann

2 1

Feature request: OpenBSD CARP and pf
by Tommy Nevtelen 28 Sep '17

28 Sep '17

Hi there! I would like to request CARP-MIB and PF-MIB support in Observium. Most importantly show if the CARP interfaces are master or backup. So we can get alerted. Maybe show it in the same way as Cisco ASA Active/Passive or some other better suited as you can have an arbitrary amount of CARP interfaces. And then the ability to graph the statistics from PF-MIB. The MIBs for reference: https://github.com/openbsd/src/tree/master/share/snmp Not sure if this is a lot of work or not though, hope some of it is easy enough :) -- Tommy Nevtelen

1 0

Alerts Frequency
by Kris Kirkland 28 Sep '17

28 Sep '17

Is there an option to keep observium from "obsessing" over an alert? I would like to only alert once on failure and once on recovery, not every time it checks. -- Kris Kirkland ~ K5KRK 2B1ASK1 - http://goo.gl/5bU4F0

1 0

Not getting alert in storage alert checker
by vaibhavkholase41＠gmail.com 28 Sep '17

28 Sep '17

Dear Team , We are stucked with observium in one alert checker issue. We have created alert checker rule as per given in your demo site still we are not able to get any storage alert even if we set this at minimum level. Below is the screenshot for alert checker configuration can you please help us it would be very great for us. One more thing is we are exploring community edition, once this is successfully tested then we will use this in our company . Waiting for your response. Thanks In Advance. Thanks & Regards , Vaibhav Kholase Sent from Mail for Windows 10

3 3

Re: [Observium] Not able to check storage status
by Tom Laermans 28 Sep '17

28 Sep '17

Hi, Please reply to the mailing list instead of directly to me. Also, can you make the image a bit smaller still? I can still read it if I really try... Either way, have you selected the correct entity type? * is not matching any entity so I'd assume not. Tom On 27/09/2017 18:31, vaibhavkholase41(a)gmail.com wrote: > > Dear Team , > > PFB Screenshot for same & I am using community edition of observium. > > Also in config.php I have use as it is option which are defined on > your wiki. > > Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for > Windows 10 > > *From: *Tom Laermans <mailto:tom.laermans@powersource.cx> > *Sent: *Wednesday, September 27, 2017 9:59 PM > *To: *observium(a)observium.org <mailto:observium@observium.org> > *Subject: *Re: [Observium] Not able to check storage status > > How about you show us what you tried (including screenshots) ? > > Tom > > On 27/09/2017 18:00, vaibhavkholase41(a)gmail.com > <mailto:vaibhavkholase41@gmail.com> wrote: > > Hi Team , > > Could you please help in how can I get the alert checker for > storage as I tried it with multiple ways but no luck. > > So requesting you to please suggest is there any nee to update my > config.php which is created by following observium docs. > > Thanks You Team In Advance.. > > Reagards , > > Vaibhav Kholase > > Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> > for Windows 10 > > > > > _______________________________________________ > > observium mailing list > > observium(a)observium.org <mailto:observium@observium.org> > > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >

2 3

Not able to check storage status
by vaibhavkholase41＠gmail.com 27 Sep '17

27 Sep '17

Hi Team , Could you please help in how can I get the alert checker for storage as I tried it with multiple ways but no luck. So requesting you to please suggest is there any nee to update my config.php which is created by following observium docs. Thanks You Team In Advance.. Reagards , Vaibhav Kholase Sent from Mail for Windows 10

2 1