- observium - lists.observium.org

Request for LigoWave Wireless MIB support
by Martin 25 Jul '17

25 Jul '17

Hello Observium developers, It would be highly appreciated if it is possible to add support for LigoWave Wireless equipment in Observium. Currently the LigoWave equipment shows as a generic Linux machine in Observium. Attached are smpwalks for the LigoWave LigoPTP 5-23 RapidFire and for the LigoWave LigoPTP 5-23 PRO, as well as the mib definition files. Is there any more info needed, or anything else I can do to help? Best regards, Martin -- M. Moens iVent Mobile

1 0

Location of Data
by Mal Evans 25 Jul '17

25 Jul '17

Hi All - recently broke my Observium install during a Ubuntu upgrade so now I am looking to build Observium on a new box. I inherited this install and have only used it a small degree so it is fair to say I am not very familiar with the overall package but want to get a better understanding an expand my usage as much as possible. For my new install I would like to be able to retain access to the historical data that has been collected (if possible). I am hoping someone will be able to give me a quick rundown on what parts of the current install I should be backing up? I have taken a copy of the mysql DB to start with but I am not sure if I should be taking something else as well. Appreciate any assistance. Cheers Mal

3 3

V2C works perfectly but v3 doesnt work
by Uthayanan 25 Jul '17

25 Jul '17

Hi Team, I am in the process of upgrading the SNMP version from v2c to v3. I have tested with few test units but in all cases, I can do the polling via v2c without any issue but when I use v3 it doesn't work. I tried with noauth , auth and auth&priv options but in all option I get an error msg saying I couldn't connect to the end device via the V3 parameters Any help on this is highly appreciated Thank You Uthay

3 5

Geolocation Lookups stopped when updating to 17.5.8580
by Peter Smith 20 Jul '17

20 Jul '17

Hi, After upgrading from version 17.5.8580 to version 17.7.8697 the geolocation lookups using Openstreetmap seem to have stopped. The event logs used to be full of lines such as: Geolocation (OPENSTREETMAP) -> [43.719989, -71.004577] United States (Country), New York (State), New York (County), New York (City) These are now completely missing. This means the location for all devices is now unknown. I have another server on version 17.5.8580 with identical configuration which is still able to do the geolocation lookups. Here is the relevant output from config.php: $config['geocoding']['enable'] = TRUE; // Enable Geocoding $config['geocoding']['location_menu_geocoded'] = TRUE; $config['geocoding']['api'] = 'mapquest'; $config['geocoding']['api']['key'] = '<HIDDEN>'; $config['geocoding']['default']['lat'] = "51.5111119"; // Default latitude $config['geocoding']['default']['lon'] = "-0.0059373"; // Default longitude What do I need to change in order to get the geolocation lookups working again? I do not need to use Openstreetmap if there is another free option I am happy to change if required. Thanks, Peter

2 1

Re: [Observium] Important polling time increase since upgrade to r8697
by Youssef BENGELLOUN - ZAHR 20 Jul '17

20 Jul '17

1 0

Re: [Observium] Important polling time increase since upgrade to r8697
by Youssef BENGELLOUN - ZAHR 19 Jul '17

19 Jul '17

2 1

Important polling time increase since upgrade to r8697
by Youssef BENGELLOUN - ZAHR 19 Jul '17

19 Jul '17

4 5

Room Alert 32E/W
by Todd Hank 18 Jul '17

18 Jul '17

I see that you have added support for other Room Alert devices. I am wondering if you would be considering the device we are running. I have attached the MIBs file from the device. Todd Todd Hank Senior Network Administrator (920) 749-0444 Ext. 128 Todd.Hank(a)i-car.com STAY CONNECTED: [cid:image1c6adc.GIF@06c91f50.4ca84b13]<https://www.facebook.com/icareducation> [cid:image1cec3d.GIF@bea76625.40b687ab] <https://www.twitter.com/i_car_education> [cid:image2b9e10.GIF@677dea1e.4283f042] <https://www.instagram.com/icar_education> [cid:imaged141ae.GIF@b2448277.4784c2d2] <https://www.linkedin.com/company-beta/40619> [cid:image228c6b.GIF@2c54aba8.47bbc1f0] <https://www.youtube.com/user/icartraining> <https://www.linkedin.com/company-beta/40619> <https://www.youtube.com/user/icartraining> <https://www.instagram.com/icar_education> <https://www.linkedin.com/company-beta/40619> I-CAR.com<http://www.i-car.com> | RTS<http://rts.i-car.com/> | Collision Reporter Magazine<https://www.i-car.com/collisionreporter> [cid:830d8f.png@ec8c9ba4.4b8a25d3] ________________________________ This message, including any attachments, is intended only for the use of the individual or entity to which it is addressed, and may contain confidential information. Please do not disseminate this message without the permission of the sender. If you have received this communication in error, please notify the sender by reply e-mail, and delete the original message, and all copies, from your system, without reading it. Any dissemination, distribution or copying of this communication is strictly prohibited, and may be a violation of applicable laws.

2 2

CPU / Memory mini-graphs missing with Brocade VDX switchs
by Youssef BENGELLOUN - ZAHR 17 Jul '17

17 Jul '17

2 5

Broke Apache changing Observium IP
by Todd Hank 14 Jul '17

14 Jul '17

Wow dummy move on my part. The Observium server was still running with DHCP so I went in and changed tio to a static IP and now when I try to access Observium, I get the apache “It Works!” page. Little help…please. Thank you Todd Hank Senior Network Administrator (920) 749-0444 Ext. 128 Todd.Hank(a)i-car.com STAY CONNECTED: [cid:imagea7c0ca.GIF@5858264a.42b00101]<https://www.facebook.com/icareducation> [cid:imaged285a7.GIF@c2ad8091.49b95011] <https://www.twitter.com/i_car_education> [cid:image79644f.GIF@d2a4fea3.4f84c726] <https://www.instagram.com/icar_education> [cid:imagef88f6c.GIF@629acfbd.47be2236] <https://www.linkedin.com/company-beta/40619> [cid:image25f851.GIF@f662ca34.45a7fd57] <https://www.youtube.com/user/icartraining> <https://www.linkedin.com/company-beta/40619> <https://www.youtube.com/user/icartraining> <https://www.instagram.com/icar_education> <https://www.linkedin.com/company-beta/40619> I-CAR.com<http://www.i-car.com> | RTS<http://rts.i-car.com/> | Collision Reporter Magazine<https://www.i-car.com/collisionreporter> [cid:2888fd.png@a45f5aee.42be349c] ________________________________ This message, including any attachments, is intended only for the use of the individual or entity to which it is addressed, and may contain confidential information. Please do not disseminate this message without the permission of the sender. If you have received this communication in error, please notify the sender by reply e-mail, and delete the original message, and all copies, from your system, without reading it. Any dissemination, distribution or copying of this communication is strictly prohibited, and may be a violation of applicable laws.

2 5

HP RAID and Exchange 2010
by Todd Hank 14 Jul '17

14 Jul '17

I have been running the Pro version for 24 hours now. Really like what I see. Couple things I am looking to be able to monitor. I have one Supermicro server with windows 2008r2 and it is reporting in the individual raid drive status. This is great so I added another server HP dl380 running windows 2008r2 and I don’t see the raid drive statuses. How can I add theses? On the same HP DL380 we are running Exchange 2010. I was hoping I could get some monitoring of Exchange as well. I would appreciate any help. Thanks, Todd Hank Senior Network Administrator (920) 749-0444 Ext. 128 (920) 749-0336 - Fax Todd.Hank(a)i-car.com [cid:dcf71c.png@754d93e9.418acefd] ________________________________ This message, including any attachments, is intended only for the use of the individual or entity to which it is addressed, and may contain confidential information. Please do not disseminate this message without the permission of the sender. If you have received this communication in error, please notify the sender by reply e-mail, and delete the original message, and all copies, from your system, without reading it. Any dissemination, distribution or copying of this communication is strictly prohibited, and may be a violation of applicable laws.

7 18

SNMPD on Ubuntu
by Todd Hank 14 Jul '17

14 Jul '17

I am looking to get more and more items working and now I am looking at the Ubuntu servers we have. After attempting to setup my first server I get the output below when running the snmpwalk command. Seems there is a permission issue. iso.3.6.1.4.1.2021.7890.1.1.0 = INTEGER: 1 iso.3.6.1.4.1.2021.7890.1.2.1.2.6.100.105.115.116.114.111 = STRING: "/usr/bin/distro" iso.3.6.1.4.1.2021.7890.1.2.1.3.6.100.105.115.116.114.111 = "" iso.3.6.1.4.1.2021.7890.1.2.1.4.6.100.105.115.116.114.111 = "" iso.3.6.1.4.1.2021.7890.1.2.1.5.6.100.105.115.116.114.111 = INTEGER: 5 iso.3.6.1.4.1.2021.7890.1.2.1.6.6.100.105.115.116.114.111 = INTEGER: 1 iso.3.6.1.4.1.2021.7890.1.2.1.7.6.100.105.115.116.114.111 = INTEGER: 1 iso.3.6.1.4.1.2021.7890.1.2.1.20.6.100.105.115.116.114.111 = INTEGER: 4 iso.3.6.1.4.1.2021.7890.1.2.1.21.6.100.105.115.116.114.111 = INTEGER: 1 iso.3.6.1.4.1.2021.7890.1.3.1.1.6.100.105.115.116.114.111 = STRING: "/usr/bin/distro: Permission denied" iso.3.6.1.4.1.2021.7890.1.3.1.2.6.100.105.115.116.114.111 = STRING: "/usr/bin/distro: Permission denied" iso.3.6.1.4.1.2021.7890.1.3.1.3.6.100.105.115.116.114.111 = INTEGER: 1 iso.3.6.1.4.1.2021.7890.1.3.1.4.6.100.105.115.116.114.111 = INTEGER: 1 iso.3.6.1.4.1.2021.7890.1.4.1.2.6.100.105.115.116.114.111.1 = STRING: "/usr/bin/distro: Permission denied" Todd Hank Senior Network Administrator (920) 749-0444 Ext. 128 Todd.Hank(a)i-car.com STAY CONNECTED: [cid:imagee3a7d5.GIF@32fde44b.43ba959e]<https://www.facebook.com/icareducation> [cid:image362e7f.GIF@847bc8ce.46bea44d] <https://www.twitter.com/i_car_education> [cid:image74a52d.GIF@2e3469c1.4ca12d9b] <https://www.instagram.com/icar_education> [cid:imagea7956a.GIF@beba141d.4e83ac32] <https://www.linkedin.com/company-beta/40619> [cid:image190342.GIF@b6c15ef2.4d8c69dd] <https://www.youtube.com/user/icartraining> <https://www.linkedin.com/company-beta/40619> <https://www.youtube.com/user/icartraining> <https://www.instagram.com/icar_education> <https://www.linkedin.com/company-beta/40619> I-CAR.com<http://www.i-car.com> | RTS<http://rts.i-car.com/> | Collision Reporter Magazine<https://www.i-car.com/collisionreporter> [cid:b8949d.png@5be8669d.4e8ba456] ________________________________ This message, including any attachments, is intended only for the use of the individual or entity to which it is addressed, and may contain confidential information. Please do not disseminate this message without the permission of the sender. If you have received this communication in error, please notify the sender by reply e-mail, and delete the original message, and all copies, from your system, without reading it. Any dissemination, distribution or copying of this communication is strictly prohibited, and may be a violation of applicable laws.

4 8

Juniper SRX340
by John Klasa 13 Jul '17

13 Jul '17

Hi, I have an issue with a SRX340 device running 15.1X49-D90 and it seems to poll sessions from the device but Observium is unable to graph and draw the graphs? Looks like this. [cid:image001.png@01D2FBE9.A484BD00] __________________________________________________ Any debugging I can do to find out? I did a poller -dd and it looks like this: less /var/tmp/fw5.log | egrep -i session SQL[SELECT @@SESSION.sql_mode;] SQL[SELECT @@SESSION.sql_mode;] jnxJsSPUMonitoringCurrentFlowSession.0 = 184 jnxJsSPUMonitoringMaxFlowSession.0 = 262144 jnxJsSPUMonitoringCurrentCPSession.0 = 0 jnxJsSPUMonitoringMaxCPSession.0 = 0 [jnxJsSPUMonitoringCurrentFlowSession] => string(3) "184" [jnxJsSPUMonitoringMaxFlowSession] => string(6) "262144" [jnxJsSPUMonitoringCurrentCPSession] => string(1) "0" [jnxJsSPUMonitoringMaxCPSession] => string(1) "0" ds[CurrentFlowSession].index = 0 ds[CurrentFlowSession].type = "GAUGE" ds[CurrentFlowSession].minimal_heartbeat = 600 ds[CurrentFlowSession].min = 0.0000000000e+00 ds[CurrentFlowSession].max = 1.0000000000e+11 ds[CurrentFlowSession].last_ds = "195" ds[CurrentFlowSession].value = 1.1503313835e+04 ds[CurrentFlowSession].unknown_sec = 0 ds[MaxFlowSession].index = 1 ds[MaxFlowSession].type = "GAUGE" ds[MaxFlowSession].minimal_heartbeat = 600 ds[MaxFlowSession].min = 0.0000000000e+00 ds[MaxFlowSession].max = 1.0000000000e+11 ds[MaxFlowSession].last_ds = "262144" ds[MaxFlowSession].value = 1.5464229241e+07 ds[MaxFlowSession].unknown_sec = 0 ds[CurrentCPSession].index = 2 ds[CurrentCPSession].type = "GAUGE" ds[CurrentCPSession].minimal_heartbeat = 600 ds[CurrentCPSession].min = 0.0000000000e+00 ds[CurrentCPSession].max = 1.0000000000e+11 ds[CurrentCPSession].last_ds = "0" ds[CurrentCPSession].value = 0.0000000000e+00 ds[CurrentCPSession].unknown_sec = 0 ds[MaxCPSession].index = 3 ds[MaxCPSession].type = "GAUGE" ds[MaxCPSession].minimal_heartbeat = 600 ds[MaxCPSession].min = 0.0000000000e+00 ds[MaxCPSession].max = 1.0000000000e+11 ds[MaxCPSession].last_ds = "0" ds[MaxCPSession].value = 0.0000000000e+00 ds[MaxCPSession].unknown_sec = 0 'CurrentFlowSession' => array('label' => 'CurrentFlowSession'), 'MaxFlowSession' => array('label' => 'MaxFlowSession'), 'CurrentCPSession' => array('label' => 'CurrentCPSession'), 'MaxCPSession' => array('label' => 'MaxCPSession'), fdb_count,jnxJsSPUMonitoringFlowSessions, jnxJsSPUMonitoringCPSessions, poller_perf It seems Observium is getting the value from the device? Regards -John

3 6

Nested alert device matching?
by Ron Marosko 13 Jul '17

13 Jul '17

Howdy Guys, I'm trying to figure out how I can build a "nested" for lack of better description device matching script. For example, "type equals network AND hostname match *domain1.com*". Or, "type equals network AND hostname notmatch *domain2.com*". I can't just use a "hostname match *domain1.com*" because I also have devices in other groups with the same hostname match, but don't want to alert-check on those other groups. I'm sure there's a way to do this, I'm just not figuring it out, and apparently my search-fu is weak. Thanks, Ron -- Ron Marosko, Jr. . . . . . . . . . . . . . . . . . . . . . . . . . . CCIE No. 4526 (R/S), NN5DX Senior Network Engineer RJR Services, Inc. 1108 West Dickinson Blvd, Suite A Fort Stockton, TX 79735 USA o: +1 432 336 5600 x115 c: +1 432 290 6344 e: <mailto:ron@rjr-services.com> ron(a)rjr-services.com pgp pubkey: <http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x778B3B0258AB8B5C> 0x58AB8B5C "To know me is to fly with me." -- This message has been scanned by E.F.A. Project and is believed to be clean.

3 3

how to create custom sensor threshold for some devices?
by Thomas Stather 13 Jul '17

13 Jul '17

Hi I am running Observium Professional an im havving an issue with some sensors in our environment I have a sensor that is always generating an alert: Index: hh3cEntityExtTemperature.112 Class: temperature min: 0 degrees max: 0 degrees current: 40 degrees I have many of them on one device i.e.: hh3cEntityExtTemperature.112 hh3cEntityExtTemperature.122 hh3cEntityExtTemperature.262 hh3cEntityExtTemperature.267 Additionally, all switches of this kind are producing the alerts since they all have the indexes and the incorrect threshold. How can i set a custom threshold that is valid for all of these switches and Indexes (the indexes are equal on all of the switches)? Best, Thomas -- Thomas Stather IT Services VCP4, VCP6-DCV Tel: +49 6221-486 628 Fax: +49 6221-486 561 ------------------------------------------------------------------------ Max Planck Institute for Medical Research (MPImF) Jahnstrasse 29, 69120 Heidelberg Germany

2 1

Account Activation
by Nick Pratley 13 Jul '17

13 Jul '17

Hey, Can someone please re-send activation email to me ☺ Groups were broken at the time we registered, so rejected the email and it hasn’t come through again ☹ Username is batman. Cheers Nick P

2 1

Ports sensors missing for Brocade VDX 6940/6740
by Youssef BENGELLOUN - ZAHR 12 Jul '17

12 Jul '17

3 27

Brocade VDX switchs - difference in OS versions display
by Youssef BENGELLOUN - ZAHR 12 Jul '17

12 Jul '17

3 13

Alert checker for APC ups
by Daniel Johansson 07 Jul '17

07 Jul '17

Hi I'm tring to figure out how to create an alert checker for when the UPS loses external Power. See the attached Picture. The OK or OnLine are the ones I want to look at and create an alert from. Anyone have any ideas? Did a debug during polling of the ups and got this but I can't figure out how to use it in the alert checker. Output Status powernet-upsbasicoutput-state upsBasicOutputStatus.0 snmp onLine ok 2017-07-06 10:02:39 Regards Daniel

4 6

All devices a new field "Note"
by Krenek Milan DiS. 04 Jul '17

04 Jul '17

Hi, Can I have wish to improve monitoring system :) Is possible implement for all devices a new field "Note" for write notes like in VmWare? BR Milan

1 0

List of installed application / running process
by Krenek Milan DiS. 04 Jul '17

04 Jul '17

Hi, Can I have wish to improve monitoring system :) Is possible implement for devices Custom OID with list like examples bellow or implement list of install application snmptable -v1 -c Public servername .1.3.6.1.2.1.25.6.3 or list of running processes snmptable -v1 -c Public servername .1.3.6.1.2.1.25.4.2 and possibilty create alert when running process is not in the list ;-) S přátelským pozdravem / Mit freundlichen Grüßen BR Milan

1 0

Show server network shares
by Krenek Milan DiS. 04 Jul '17

04 Jul '17

Hi, Can I have wish to improve monitoring system :) Is possible implemet to device information "network shares" from Windows system? BR Milan

1 0

Alert Checkers and Mail Settings
by Kaustubh Parthasarthy, CLSA 03 Jul '17

03 Jul '17

Hello Experts, Quick one, I have Port Down Alerts on my Alerts section. I have not disabled the polling and alerts for those ports on the respective devices. But inspite of it, I still see those alerts in my alerts section. Does it clear or something just because we have disabled the polling for those ports which are down. ??? Also, I have put my mail ID as contact and enabled the mail alerts. For example, I have 50 alerts in my alerts section: [cid:image001.png@01D2F3D8.B1EB9EA0] So I get an alert flood in my mail box for those 50 alerts all once. I have my refresh interval of 5 mins, so after 5 mins I get the flood of 50 mail alerts again ? Why there is a recurring of the mail alerts ? PS: I have disabled the: RECOVERY in the alert checks still getting flood of alerts and it keeps repeating Regards Kaustubh From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Friday, June 30, 2017 3:54 PM To: Observium Cc: observium Subject: Re: [Observium] Alert Checkers No. Disabling polling disables, well, polling. How do you expect Observium to know a port has gone down if it isn't being polled? Oo Adam. Sent from BlueMail<http://www.bluemail.me/r?b=9856> On 30 Jun 2017, at 11:06 am, "Kaustubh Parthasarthy, CLSA" <kaustubh.parthasarthy(a)clsa.com<mailto:kaustubh.parthasarthy@clsa.com>> wrote: Hello Experts, I See there 2 settings for ports on the device: [cid:image002.png@01D2F1B6.82235060] My question is, if we disable Polling and only keep Alerts, will the alerts fire for Port down ?? Regards Kaustubh From: observium [mailto:observium-bounces@observium.org] On Behalf Of Stef Renders Sent: Friday, June 30, 2017 2:50 PM To: Observium; observium Subject: Re: [Observium] Alert Checkers Small remark, Your OSPF alert should be defined as a syslog alert, which I’m not sure if its available in CE yet. It says it’s being checked, but actually it’s not since the condition or test will not do anything. Kind regards From: observium [mailto:observium-bounces@observium.org] On Behalf Of Kaustubh Parthasarthy, CLSA Sent: vrijdag 30 juni 2017 11:09 To: Observium <observium(a)observium.org<mailto:observium@observium.org>>; Observium <observium(a)observium.org<mailto:observium@observium.org>>; observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> Cc: observium(a)observium.org<mailto:observium@observium.org> Subject: Re: [Observium] Alert Checkers Thank you Simon, It worked after rebuild: [cid:image003.png@01D2F1B6.82235060] I did not find in the documentation to rebuild after every time, we add some alert checkers. Anyways Thanks guys ☺ very helpful you are. I will also try to pitch in if I can help or assist someone solve some issues. Cheers Regards Kaustubh From: observium [mailto:observium-bounces@observium.org] On Behalf Of Simon Mousey Smith Sent: Friday, June 30, 2017 2:28 PM To: Observium Subject: Re: [Observium] Alert Checkers Hi, Have you clicked the ‘Rebuild' at the top of the Alert Checks Page next to the ‘Add Syslog Rule'? Every time you change something in the alerts check page you have to rebuild!? Regards Simon On 30 Jun 2017, at 09:54, Kaustubh Parthasarthy, CLSA <kaustubh.parthasarthy(a)clsa.com<mailto:kaustubh.parthasarthy@clsa.com>> wrote: Adam, I am seeing some assistance here. Let me give you a scenario here. I want Observium to alert me when my Port is “DOWN” If I put a condition as ifOperStatus equals up ifAdminStatus equals up What is use of the alerting ? I do not want alerts if my port is UP. I hope you get it. Please explain. Also FYI, even if I change the entity type to “Port” from Device, then also no luck. If you want me to pay more attention, let me get an example to you: You have BGP example on your “Excellent Website” : <image001.png> Look at my alert Check: <image002.png> Now tell me why no number count here. I am trying to understand the tool here, as I am using this for the first time, hence asking you to please assist. Regards Kaustubh From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Friday, June 30, 2017 2:17 PM To: observium(a)observium.org<mailto:observium@observium.org> Subject: Re: [Observium] Alert Checkers That isn't a port alert. It's a device alert. It's very, very important that the entity type is set correctly. Also you have switched "equals" to "notequals", which means the checker no longer makes sense. Please pay more attention to the specific details of the examples. adam. On 30/06/2017 09:44:13, Kaustubh Parthasarthy, CLSA <kaustubh.parthasarthy(a)clsa.com<mailto:kaustubh.parthasarthy@clsa.com>> wrote: Example in the documentation: Port status should be down for the alert, I have mentioned notequals up in my below snippet, but still no count is reproducing Regards kaustubh From: Kaustubh Parthasarthy, CLSA Sent: Friday, June 30, 2017 2:09 PM To: 'Observium' Cc: 'Observium Public Support'; 'observium(a)observium.org<mailto:observium@observium.org>' Subject: RE: [Observium] Alert Checkers Hi Team, TO add on the below, I have referred to the documentation section, The settings I have: The settings seems correct, they why it does not reflect anything in the count section ? Regards Kaustubh From: Kaustubh Parthasarthy, CLSA Sent: Friday, June 30, 2017 2:04 PM To: observium(a)observium.org<mailto:observium@observium.org> Cc: Observium Public Support; observium(a)observium.org<mailto:observium@observium.org> Subject: RE: [Observium] Alert Checkers HI Team, Could you give me a working example of the alert checker ? Regards Kaustubh From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Friday, June 30, 2017 1:13 PM To: observium(a)observium.org<mailto:observium@observium.org> Subject: Re: [Observium] Alert Checkers This suggests that the alert table hasn't been regenerated since you created these alert checkers. Note that the OSPF one won't ever work, because it's just a bunch of nonsense text which doesn't match the checker format. Also the temperature alert, sensor event alert and port operational status alerts won't work because they don't really make any sense. You need to read the documentation and examples about creating alert checkers again. Thanks, adam. On 30/06/2017 08:12:59, Kaustubh Parthasarthy, CLSA <kaustubh.parthasarthy(a)clsa.com<mailto:kaustubh.parthasarthy@clsa.com>> wrote: Thank you for the Response Adam, Was also wondering, I have added some alert checks for Network related testing. If you see, the one highlighted are for Network related alerts, but I seem to have some issue here. If you look at the above for the CPU, Memory, Storage, etc the tool is able to detect and show the numbers in “Green” and “Red” But there is nothing indicating for BGP, high temperature and other highlighted alert checkers. Am I doing something different here or my alert conditions have issues ? Regards Kaustubh From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Friday, June 30, 2017 10:27 AM To: Observium Cc: Kunal Shah, CLSA; observium(a)observium.org<mailto:observium@observium.org> Subject: Re: [Observium] Process Level Alerts in Observium Hi, This isn't possible, and would actually be pretty complicated to do. Not least because Observium doesn't yet collect per-process data! Thanks, Adam. Sent from BlueMail<http://www.bluemail.me/r?b=9856> On 30 Jun 2017, at 4:57 am, "Kaustubh Parthasarthy, CLSA" <kaustubh.parthasarthy(a)clsa.com<mailto:kaustubh.parthasarthy@clsa.com>> wrote: Hi Team, First, I would like to subscribe to the Observium mailing list. Second, i am using the Community Edition of Observium. Following are the details: I have setup some alert checks to capture the high CPU alerts. I was also successful to capture some alert. PFA the results. I would like to know, if we can also show, which are the top 10 processes, which are running and as a result the utilization is going high. If I can get the output of the top 10 or top 5 processes on the same mail which is attached, this would assist the support teams to troubleshoot. Could you please assist on this as to how can I setup ? Thank you and Regards Kaustubh The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. CLSA is ISO14001 certified and committed to reducing environmental impact. ________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. CLSA is ISO14001 certified and committed to reducing environmental impact. The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. CLSA is ISO14001 certified and committed to reducing environmental impact. The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. CLSA is ISO14001 certified and committed to reducing environmental impact. _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. CLSA is ISO14001 certified and committed to reducing environmental impact. The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. CLSA is ISO14001 certified and committed to reducing environmental impact. ________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. CLSA is ISO14001 certified and committed to reducing environmental impact.

2 1

New request created with ID: ##398## from observium-request
by SABIN SUBRAMANNIAN 02 Jul '17

02 Jul '17

1 0

Re: [Observium] observium Digest, Vol 84, Issue 1
by 张来 01 Jul '17

01 Jul '17

hello！I am ob user. I think I lost my observium svn username and password. Can you help me to set my usernane and password as username：yuri password：Ad2003@0407 Thank you！发自我的 iPhone > 在 2017年7月1日，19:00，observium-request@observium.org 写道： > > Send observium mailing list submissions to > observium(a)observium.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > > You can reach the person managing the list at > observium-owner(a)observium.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of observium digest..." > > > Today's Topics: > > 1. Re: Alert Checkers (Kaustubh Parthasarthy, CLSA) > 2. Re: Alert Checkers (Kaustubh Parthasarthy, CLSA) > 3. Re: Alert Checkers (Adam Armstrong) > 4. Re: Alert Checkers (Kaustubh Parthasarthy, CLSA) > 5. Re: python-wrapper loop? (John Klasa) > 6. Re: Alert Checkers (Thomas Nicholson) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 30 Jun 2017 11:07:11 +0000 > From: "Kaustubh Parthasarthy, CLSA" <kaustubh.parthasarthy(a)clsa.com> > To: Observium <observium(a)observium.org> > Cc: observium <observium-bounces(a)observium.org> > Subject: Re: [Observium] Alert Checkers > Message-ID: > <FB5687B07A6D2240865CB25880DDF15654BAED99(a)zklnwp367.int.clsa.com> > Content-Type: text/plain; charset="utf-8" > > Hello Experts, > > Quick one, > > I have Port Down Alerts on my Alerts section. > > I have not disabled the polling and alerts for those ports on the respective devices. > > But inspite of it, I still see those alerts in my alerts section. Does it clear or something just because we have disabled the polling for those ports which are down. ??? > > Also, I have put my mail ID as contact and enabled the mail alerts. > > For example, I have 50 alerts in my alerts section: > > [cid:image001.png@01D2F1BF.1E7B2480] > > So I get an alert flood in my mail box for those 50 alerts all once. I have my refresh interval of 5 mins, so after 5 mins I get the flood of 50 mail alerts again ? > > Why there is a recurring of the mail alerts ?? > > PS: I have disabled the: RECOVERY in the alert checks still getting flood of alerts and it keeps repeating > > Regards > Kaustubh > > From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong > Sent: Friday, June 30, 2017 3:54 PM > To: Observium > Cc: observium > Subject: Re: [Observium] Alert Checkers > > No. Disabling polling disables, well, polling. > How do you expect Observium to know a port has gone down if it isn't being polled? Oo > Adam. > Sent from BlueMail<http://www.bluemail.me/r?b=9856> > On 30 Jun 2017, at 11:06 am, "Kaustubh Parthasarthy, CLSA" <kaustubh.parthasarthy(a)clsa.com<mailto:kaustubh.parthasarthy@clsa.com>> wrote: > Hello Experts, > > > I See there 2 settings for ports on the device: > > > [cid:image002.png@01D2F1B6.82235060] > > > My question is, if we disable Polling and only keep Alerts, will the alerts fire for Port down ?? > > > Regards > Kaustubh > > > From: observium [mailto:observium-bounces@observium.org] On Behalf Of Stef Renders > Sent: Friday, June 30, 2017 2:50 PM > To: Observium; observium > Subject: Re: [Observium] Alert Checkers > > > Small remark, > > > Your OSPF alert should be defined as a syslog alert, which I’m not sure if its available in CE yet. It says it’s being checked, but actually it’s not since the condition or test will not do anything. > > > Kind regards > > > > > From: observium [mailto:observium-bounces@observium.org] On Behalf Of Kaustubh Parthasarthy, CLSA > Sent: vrijdag 30 juni 2017 11:09 > To: Observium <observium(a)observium.org<mailto:observium@observium.org>>; Observium <observium(a)observium.org<mailto:observium@observium.org>>; observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> > Cc: observium(a)observium.org<mailto:observium@observium.org> > Subject: Re: [Observium] Alert Checkers > > > Thank you Simon, > > > It worked after rebuild: > > > [cid:image003.png@01D2F1B6.82235060] > > > I did not find in the documentation to rebuild after every time, we add some alert checkers. > > > Anyways Thanks guys ☺ very helpful you are. I will also try to pitch in if I can help or assist someone solve some issues. Cheers > > > Regards > Kaustubh > > > From: observium [mailto:observium-bounces@observium.org] On Behalf Of Simon Mousey Smith > Sent: Friday, June 30, 2017 2:28 PM > To: Observium > Subject: Re: [Observium] Alert Checkers > > > Hi, > > > Have you clicked the ‘Rebuild' at the top of the Alert Checks Page next to the ‘Add Syslog Rule'? > > > Every time you change something in the alerts check page you have to rebuild!? > > > Regards > > > Simon > > > On 30 Jun 2017, at 09:54, Kaustubh Parthasarthy, CLSA <kaustubh.parthasarthy(a)clsa.com<mailto:kaustubh.parthasarthy@clsa.com>> wrote: > > > Adam, > > I am seeing some assistance here. > > Let me give you a scenario here. I want Observium to alert me when my Port is “DOWN” > > If I put a condition as > > ifOperStatus equals up > ifAdminStatus equals up > > What is use of the alerting ? I do not want alerts if my port is UP. I hope you get it. Please explain. > > Also FYI, even if I change the entity type to “Port” from Device, then also no luck. > > If you want me to pay more attention, let me get an example to you: > > You have BGP example on your “Excellent Website” : > > <image001.png> > > Look at my alert Check: > > <image002.png> > > Now tell me why no number count here. > > I am trying to understand the tool here, as I am using this for the first time, hence asking you to please assist. > > Regards > Kaustubh > > From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong > Sent: Friday, June 30, 2017 2:17 PM > To: observium(a)observium.org<mailto:observium@observium.org> > Subject: Re: [Observium] Alert Checkers > > That isn't a port alert. It's a device alert. > > It's very, very important that the entity type is set correctly. Also you have switched "equals" to "notequals", which means the checker no longer makes sense. > > Please pay more attention to the specific details of the examples. > > adam. > On 30/06/2017 09:44:13, Kaustubh Parthasarthy, CLSA <kaustubh.parthasarthy(a)clsa.com<mailto:kaustubh.parthasarthy@clsa.com>> wrote: > Example in the documentation: > > Port status should be down for the alert, I have mentioned notequals up in my below snippet, but still no count is reproducing > > Regards > kaustubh > From: Kaustubh Parthasarthy, CLSA > Sent: Friday, June 30, 2017 2:09 PM > To: 'Observium' > Cc: 'Observium Public Support'; 'observium(a)observium.org<mailto:observium@observium.org>' > Subject: RE: [Observium] Alert Checkers > > Hi Team, > > TO add on the below, > > I have referred to the documentation section, > > > The settings I have: > > > > The settings seems correct, they why it does not reflect anything in the count section ? > > Regards > Kaustubh > From: Kaustubh Parthasarthy, CLSA > Sent: Friday, June 30, 2017 2:04 PM > To: observium(a)observium.org<mailto:observium@observium.org> > Cc: Observium Public Support; observium(a)observium.org<mailto:observium@observium.org> > Subject: RE: [Observium] Alert Checkers > > HI Team, > > Could you give me a working example of the alert checker ? > > Regards > Kaustubh > > From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong > Sent: Friday, June 30, 2017 1:13 PM > To: observium(a)observium.org<mailto:observium@observium.org> > Subject: Re: [Observium] Alert Checkers > > This suggests that the alert table hasn't been regenerated since you created these alert checkers. > > Note that the OSPF one won't ever work, because it's just a bunch of nonsense text which doesn't match the checker format. > > Also the temperature alert, sensor event alert and port operational status alerts won't work because they don't really make any sense. > > You need to read the documentation and examples about creating alert checkers again. > > Thanks, > adam. > On 30/06/2017 08:12:59, Kaustubh Parthasarthy, CLSA <kaustubh.parthasarthy(a)clsa.com<mailto:kaustubh.parthasarthy@clsa.com>> wrote: > Thank you for the Response Adam, > > Was also wondering, I have added some alert checks for Network related testing. > > > If you see, the one highlighted are for Network related alerts, but I seem to have some issue here. If you look at the above for the CPU, Memory, Storage, etc the tool is able to detect and show the numbers in “Green” and “Red” But there is nothing indicating for BGP, high temperature and other highlighted alert checkers. > > Am I doing something different here or my alert conditions have issues ? > > Regards > Kaustubh > > From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong > Sent: Friday, June 30, 2017 10:27 AM > To: Observium > Cc: Kunal Shah, CLSA; observium(a)observium.org<mailto:observium@observium.org> > Subject: Re: [Observium] Process Level Alerts in Observium > > Hi, > This isn't possible, and would actually be pretty complicated to do. > Not least because Observium doesn't yet collect per-process data! > Thanks, > Adam. > Sent from BlueMail<http://www.bluemail.me/r?b=9856> > On 30 Jun 2017, at 4:57 am, "Kaustubh Parthasarthy, CLSA" <kaustubh.parthasarthy(a)clsa.com<mailto:kaustubh.parthasarthy@clsa.com>> wrote: > Hi Team, > > First, I would like to subscribe to the Observium mailing list. > > Second, i am using the Community Edition of Observium. Following are the details: > > > I have setup some alert checks to capture the high CPU alerts. I was also successful to capture some alert. PFA the results. > > I would like to know, if we can also show, which are the top 10 processes, which are running and as a result the utilization is going high. > > If I can get the output of the top 10 or top 5 processes on the same mail which is attached, this would assist the support teams to troubleshoot. > > Could you please assist on this as to how can I setup ? > > Thank you and Regards > Kaustubh > > The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. > These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. > CLSA is ISO14001 certified and committed to reducing environmental impact. > > ________________________________ > > observium mailing list > observium(a)observium.org<mailto:observium@observium.org> > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. > These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. > CLSA is ISO14001 certified and committed to reducing environmental impact. > The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. > These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. > CLSA is ISO14001 certified and committed to reducing environmental impact. > The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. > These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. > CLSA is ISO14001 certified and committed to reducing environmental impact. > _______________________________________________ > observium mailing list > observium(a)observium.org<mailto:observium@observium.org> > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > > The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. > These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. > CLSA is ISO14001 certified and committed to reducing environmental impact. > > The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. > These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. > CLSA is ISO14001 certified and committed to reducing environmental impact. > > ________________________________ > > observium mailing list > observium(a)observium.org<mailto:observium@observium.org> > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. > These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. > CLSA is ISO14001 certified and committed to reducing environmental impact. >

3 2