- observium - lists.observium.org

Re: [Observium] Alert Checkers
by Kaustubh Parthasarthy, CLSA 30 Jun '17

30 Jun '17

Thank you for the Response Adam, Was also wondering, I have added some alert checks for Network related testing. [cid:image001.png@01D2F19D.1634BC40] If you see, the one highlighted are for Network related alerts, but I seem to have some issue here. If you look at the above for the CPU, Memory, Storage, etc the tool is able to detect and show the numbers in “Green” and “Red” But there is nothing indicating for BGP, high temperature and other highlighted alert checkers. Am I doing something different here or my alert conditions have issues ? Regards Kaustubh From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Friday, June 30, 2017 10:27 AM To: Observium Cc: Kunal Shah, CLSA; observium(a)observium.org Subject: Re: [Observium] Process Level Alerts in Observium Hi, This isn't possible, and would actually be pretty complicated to do. Not least because Observium doesn't yet collect per-process data! Thanks, Adam. Sent from BlueMail<http://www.bluemail.me/r?b=9856> On 30 Jun 2017, at 4:57 am, "Kaustubh Parthasarthy, CLSA" <kaustubh.parthasarthy(a)clsa.com<mailto:kaustubh.parthasarthy@clsa.com>> wrote: Hi Team, First, I would like to subscribe to the Observium mailing list. Second, i am using the Community Edition of Observium. Following are the details: [cid:image001.png@01D2F0C3.971FFA70] I have setup some alert checks to capture the high CPU alerts. I was also successful to capture some alert. PFA the results. I would like to know, if we can also show, which are the top 10 processes, which are running and as a result the utilization is going high. If I can get the output of the top 10 or top 5 processes on the same mail which is attached, this would assist the support teams to troubleshoot. Could you please assist on this as to how can I setup ? Thank you and Regards Kaustubh The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. CLSA is ISO14001 certified and committed to reducing environmental impact. ________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. CLSA is ISO14001 certified and committed to reducing environmental impact.

6 23

python-wrapper loop?
by John Klasa 30 Jun '17

30 Jun '17

Hi I've upgraded to this version: ./discovery.php -V Observium 17.5.8580 It seemed to be a great update but then MySQL died and I found this in the logs: [2017/06/29 15:05:20 +0200] poller-wrapper.py(29309): /opt/observium/poller-wrapper.py: URGENT: poller-wrapper not started because already running 34 processes, load average (5min) 37.17 And it kept increasing upton load over 70 where I killed all python, CROND and for some reason A LOT of ps processes. An example of processes below. 26133 ? D 0:00 ps -ww -o ppid,uid,args -p 23434 26331 ? R 0:00 ps -ww -o ppid,uid,args -p 2981 26354 ? R 0:00 ps -ww -o ppid,uid,args -p 10439 26355 ? R 0:00 ps -ww -o ppid,uid,args -p 11755 26356 ? R 0:00 ps -ww -o ppid,uid,args -p 5772 26357 ? R 0:00 ps -ww -o ppid,uid,args -p 2624 26360 ? R 0:00 ps -ww -o ppid,uid,args -p 19699 846 purify 20 0 342884 70760 1636 S 1.0 1.9 0:33.02 python 4424 purify 20 0 354536 11156 1632 S 1.0 0.3 1:27.40 python 4739 purify 20 0 356676 11832 1632 S 1.0 0.3 1:36.27 python 9718 purify 20 0 349728 10108 1636 S 1.0 0.3 1:03.00 python 20551 purify 20 0 361020 12280 1632 S 1.0 0.3 2:01.39 python 31260 purify 20 0 348144 76392 1636 S 1.0 2.0 0:56.62 python 402 purify 20 0 345244 33752 1636 S 0.7 0.9 0:43.67 python 1315 purify 20 0 343148 59904 1632 S 0.7 1.6 0:35.71 python 3219 purify 20 0 341844 47340 1632 S 0.7 1.3 0:28.92 python 3298 purify 20 0 353204 11376 1632 S 0.7 0.3 1:19.76 python Anyone know whats going on? I see this when I try to run the debug output Your PHP version is too old (5.4.16), | | functionality may be broken. Please update your PHP! | | Currently recommended version(s): 7.0.x or 5.6.x I guess I should upgrade PHP first. Regards -John

2 2

Process Level Alerts in Observium
by Kaustubh Parthasarthy, CLSA 30 Jun '17

30 Jun '17

Hi Team, First, I would like to subscribe to the Observium mailing list. Second, i am using the Community Edition of Observium. Following are the details: [cid:image001.png@01D2F0C3.971FFA70] I have setup some alert checks to capture the high CPU alerts. I was also successful to capture some alert. PFA the results. I would like to know, if we can also show, which are the top 10 processes, which are running and as a result the utilization is going high. If I can get the output of the top 10 or top 5 processes on the same mail which is attached, this would assist the support teams to troubleshoot. Could you please assist on this as to how can I setup ? Thank you and Regards Kaustubh The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. CLSA is ISO14001 certified and committed to reducing environmental impact.

2 1

getting multiple random down events Device status changed to Down (ping)
by Ron Culler 29 Jun '17

29 Jun '17

Started getting multiple events "Device status changed to Down (ping) " over the last few weeks with no major increase in number of devices. Issue started on Cento 6.9 install with PHP 5.4, MySQL 5.1 (260 devices) HW - dual - quad core xeon CPUs, 24 GB Ram, RRD, MySQL, OS - with Observium install all on separate SSD drives Observium SVN install 17.6.8672 (rolling) Upgraded PHP and MySQL to PHP70 with opcode caching enabled, MySQL 5.7.18 - no change Spun up a fresh install Centos 7.3, PHP70 with opcode caching enabled, MySQL 5.7.18 (install per docs) HW - dual - quad core xeon CPUs, 24 GB Ram, RRD, MySQL, OS - with Observium install all on separate SSD drives Observium SVN install 17.6.8672 (rolling) $config['snmp']['max-rep'] = TRUE; Currently only 139 devices added To eliminate DNS related issues I have added the devices to /etc/hosts and forced resolution to use it first. Cron has /opt/observium/observium-wrapper poller -w 5 running every 5 min. The devices are not down and if I manually poll the device with a "Device status changed to Down (ping) " notice it responds normally and comes right back up. Was wondering if anyone has seen any behavior like this with this build or before. Also is there a way to skip ping during the poller run and just do snmp, and if so is it something that I can enable globally? Thanks in advance Ron Culler

1 0

wget - Read Error in Headers (Connection Reset by Peer)
by Muhammed Murat Tutar 28 Jun '17

28 Jun '17

I want to install Observium (observium.org) on my virtual Ubuntu Server but when I try to download files, I get a read error. wget http://www.observium.org/observium-community-latest.tar.gz --2017-06-28 10:53:16-- http://www.observium.org/observium-community-latest.tar.gz Resolving www.observium.org (www.observium.org)... 37.187.79.83 Connecting to www.observium.org (www.observium.org)|37.187.79.83|:80... connected. HTTP request sent, awaiting response... Read error (Connection reset by peer) in headers. Retrying. I couldn't find any solution. I use static IPv4 address and DNS servers. Ubuntu 16.04 LTS works on VCENTER Virtual Machine Version: 11 and Network Adapter is VM Network. Any solutions? Thanks.

3 2

Re: [Observium] SNMP Device without sysObjectId.0
by Oberreiter Andreas 28 Jun '17

28 Jun '17

I've noticed a typing error Snmpget -v 1 -c public portal.nadlinger.at .1.3.6.1.4.1.14848.2.1.1.1.0 -----Ursprüngliche Nachricht----- Von: observium [mailto:observium-bounces@observium.org] Im Auftrag von Oberreiter Andreas Gesendet: Donnerstag, 4. Mai 2017 10:53 An: Observium Public Support <observium(a)observium.org> Betreff: Re: [Observium] SNMP Device without sysObjectId.0 Snmpget -v 1 -c public portail.nadlinger.at .1.3.6.1.4.1.14848.2.1.1.1.0 Should answer SNMPv2-SMI::enterprises.14848.2.1.1.1.0 = STRING: "Version 1.62" -----Ursprüngliche Nachricht----- Von: observium [mailto:observium-bounces@observium.org] Im Auftrag von Mike Stupalov Gesendet: Donnerstag, 4. Mai 2017 10:00 An: Observium Public Support <observium(a)observium.org> Betreff: Re: [Observium] SNMP Device without sysObjectId.0 Hi, can you privide temporary snmp access to this device? I will do this faster :) Oberreiter Andreas wrote: > I've added print_message lines to see if my code is called. > > When I try another device e.g. a zyxel device I can see my code is executed. > > But when I try the device in question the discovery code isn't executed. > > > -----Ursprüngliche Nachricht----- > Von: observium [mailto:observium-bounces@observium.org] Im Auftrag von > Mike Stupalov > Gesendet: Mittwoch, 3. Mai 2017 17:21 > An: Observium Public Support <observium(a)observium.org> > Betreff: Re: [Observium] SNMP Device without sysObjectId.0 > > This device also not have sysDescr.0 too? > > You also should add os detecting file (from > $config['os'][$os]['discovery_os']): > includes/discovery/os/messpc.inc.php > > with content like this: > > <?php > > if (!$os) > { > // SNMPv2-SMI::enterprises.14848.2.1.1.1.0 = STRING: "Version 1.62" > $data = snmp_get($device, '.1.3.6.1.4.1.14848.2.1.1.1.0', '-Osqnv'); > if (strlen($data)) > { > $os = 'messpc'; > } > } > > // EOF > > And better os name: messpc-env > > Oberreiter Andreas wrote: >> Hi, >> >> The Device is from http://www.messpc.de >> >> I've tried to add the following lines to >> includes/definitions/os.inc.php // MessPC $os = "messpc"; >> $config['os'][$os]['text'] = "MessPC Etherbox"; >> $config['os'][$os]['vendor'] = "MessPC"; >> $config['os'][$os]['type'] = "environment"; >> $config['os'][$os]['discovery_os'] = "messpc"; >> $config['os'][$os]['snmpable'][] = ".1.3.6.1.4.1.14848.2.1.1.1.0"; >> $config['os'][$os]['mibs'][] = "ETHERBOX-MIB"; >> >> I've put the ETHERBIX-MIB file in mibs/messpc/ETHERBOX-MIB >> >> and restarted the Webserver. Then I tried to add the device again no change. >> >> I can do a snmpwalk -v 1 -c public IP .1.3.6.1.4.1.14848 >> >> The result of >> snmpget -v 1 -c public 172.30.7.2 .1.3.6.1.4.1.14848.2.1.1.1.0 is >> SNMPv2-SMI::enterprises.14848.2.1.1.1.0 = STRING: "Version 1.62" >> >> What did I wrong? >> I'm on the latest commercial Version 17.4.8476 >> >> Kind Regards >> Andreas >> >> -----Ursprüngliche Nachricht----- >> Von: observium [mailto:observium-bounces@observium.org] Im Auftrag >> von Mike Stupalov >> Gesendet: Freitag, 28. April 2017 15:02 >> An: Observium Public Support <observium(a)observium.org> >> Betreff: Re: [Observium] SNMP Device without sysObjectId.0 >> >> Hi, >> >> seems as another china/indian device? ;) >> >> For valid device adding required one of this OIDs to be exist on device: >> sysObjectID.0 or sysUpTime.0 >> >> If both OIDs not exist for device, use 'snmpable' os param. >> See example for os 'hikvision-cam': >> >> $os = "hikvision-cam"; >> $config['os'][$os]['text'] = "Hikvision Network Camera"; >> $config['os'][$os]['type'] = "video"; >> $config['os'][$os]['vendor'] = "Hikvision"; >> $config['os'][$os]['discovery_os'] = "hikvision"; >> $config['os'][$os]['snmpable'][] = >> ".1.3.6.1.4.1.39165.1.1.0"; // This device complete not have >> sysObjectID.0 or sysUpTime.0 >> $config['os'][$os]['mibs'][] = "HIK-DEVICE-MIB"; >> >> >> Oberreiter Andreas wrote: >>> Hi All, >>> >>> I have a device which doesn't provide the SysObjectId.0. >>> It start right away with the Enterprise entry's: >>> SNMPv2-SMI::enterprises.14848.2.1.1.1.0 = STRING: "Version 1.62" >>> >>> Is there a way to add such an device? The values I'm interested in are in the enterprise part of the mib and could be easily retreated by a custom OID. >>> >>> But without an SysObjectId it seems impossible to add a device. >>> >>> Any Suggestions? >>> >>> Kind regards >>> Andras >>> >>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > -- > Mike Stupalov > Observium Limited, http://observium.org > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov Observium Limited, http://observium.org _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

4 3

rrdtoolx
by austin wonderly 27 Jun '17

27 Jun '17

Hello, What would be the correct way to extract rrd data for a certain period of time (last 7 days for example). I'm trying to extract data for the following graph http://imgur.com/a/Gw9y2, although when I open up the data in excel, I'm not able to get anything of use. I used this command to produce an RRD export first: /opt/observium/scripts/rrdtoolx.py addrra netstats-udp.rrd /tmp/testrrd after which I used: rrdtool dump /tmp/testrrd > /tmp/rrd.xml to get the file into an xml format, and finally I imported the xml into excel. I'm trying to put together a list of time stamps and their appropriate data points, so for example: time1 : 22 errors time2: 10 errors time3: 30 errors .... Would it even be possible to extract this kind of data from the RRD files? Thanks for your help, Austin

2 3

MSSQL database for Professional edition
by Jan Horacek 27 Jun '17

27 Jun '17

Good evening gentlemen, I have an question about possibility run Observium PE on MSSQL database instead of MySQL/Maria DB. we are going to implement observium PE to live production and our developers are wondering if any official MSSQL plugin exists or not. Thanks for reply best Regards Jan

2 2

WAN link monitoring
by Luke Johnson 27 Jun '17

27 Jun '17

Hi, I have looked for previous questions regarding this, but haven't been able to find one, so I apologise if it has been asked/answered before. We have several paths to a remote router that we monitored via it's loopback IP address. Observium does a great job at alerting us when that router is offline, but, I'm unable to find a way to be alerted when we have a single WAN link failure. During a WAN link failure we can still access the remote router via a redundant path, however, we are often not aware that the primary is offline since Observium can still reach the remote router. Apart from checking if utilisation on the link drops below a certain level, is there any other way that I can perform a check and alert on the above scenario? Thanks, Luke

3 2

Question on geolocation dropdown menu
by Ed Iwanski 23 Jun '17

23 Jun '17

We have a largish installation and have locations / devices in every state in the US and every province/territory in Canada. We have been adding all of these to Observium and allowing them to be geolocated based on SNMP location strings (works perfectly, thank you) but found that we are running into an issue where the scrollbar is too tall for many average browser screens. There does not seem to be a way to scroll here so there are some locations that will just not be accessible or seen on this dropdown menu. Is there a way to tune or change this? Also any possibility that the states/provinces/territories can be alphabetically listed on the dropdown menu instead of in seemingly order they were added or random? Screenshot attached, there are more locations at the bottom but that was all I could fit on the screen for the capture. Thanks for any input.

2 2

snmpv3 context support
by Tomasz.Kwiecien＠nordea.com 21 Jun '17

21 Jun '17

Hi, Are you planning to add snmpv3 context support to observium? I can see that in file includes/snmp.inc.php: switch ($device['snmp_version']) { case 'v3': $cmd = ' -v3 -l ' . escapeshellarg($device['snmp_authlevel']); /* NOTE. * For proper work of 'vlan-' context on cisco, it is necessary to add 'match prefix' in snmp-server config --mike * example: snmp-server group MONITOR v3 auth match prefix access SNMP-MONITOR */ $cmd .= ($vlan) ? ' -n "vlan-' . $vlan . '"' : ' -n ""'; // Some devices, like HP, always require option '-n' Observium adds context vlan-$vlan for cisco switches if $vlan variable is defined. Would be great to have option to add device with context during new device definition (like option to choose transport protocol, port timout etc). Best regards, Tomasz Kwiecień

3 2

Change name of monitored device
by Jason Ross 21 Jun '17

21 Jun '17

Hi, I can't seem to locate anything in the doco that helps, happy to refer to that if it exists. Failing that, I have a device name that I'd like to change the name of to reflect a configuration change. Is it possibly to modify the name of the firewall in this case without dropping all of the captured stats etc? Jason

2 2

Observium Pro Purchase Question
by TLee 20 Jun '17

20 Jun '17

Good afternoon - We have been playing with the community version of OB in a dev environment and we want to purchase OB Pro edition. Does anyone know of a vendor/ retailer that i can purchase through?! The purchase is no problem, but i can't just send a screenshot to my procurement department from my account that says 'Observium Pro - Enter card info - Pay Now'?! Thanks! Sent from ProtonMail Mobile

4 5

Alerts/notifications stopped randomly?
by Simon Mousey Smith 20 Jun '17

20 Jun '17

Hi All Im trying to see if anybody else is having this issue Our Observium has randomly stopped sending alerts Currently using email/pushover/slack/hipchat and I don’t seem to get any of them!? Running test_alert -a 1 works without any issues The alert_tests range from device down to storage low regards Simon - Hestor Ltd

6 19

SVN version - checksum errors
by ICT Veenlanden College 20 Jun '17

20 Jun '17

Hi all, I want to install the Subscription version, but i keep getting Checksum errors. e.g.: svn: E200014: Checksum mismatch for '/opt/observium/html/images/os/barracuda_2x.png': expected: 2a858b050beda750f9cb394d5795f391 actual: aa1874be2a3fc37f2cd1abb57a5d4b1d Anyone know how to fix this? Running: Ubuntu 14.04 Greets, Jorrit ________________________________ Deze e-mail kan vertrouwelijk zijn en is uitsluitend bestemd voor geadresseerde. Heeft u dit bericht abusievelijk ontvangen dan verzoeken wij u het door te sturen naar info(a)hetvlc.nl en vervolgens te verwijderen. Het is niet toegestaan de informatie in de e-mail zonder toestemming te gebruiken of te verspreiden. De afzender is niet aansprakelijk wanneer informatie in deze e-mail niet volledig of niet tijdig overkomt. Voor informatie over het VeenLanden College raadpleegt u: www.veenlandencollege.nl

4 6

Monitor energy usage on APC PDU's
by Fredrik Winäs 19 Jun '17

19 Jun '17

Hi We have some metered APC PDU's that I want to monitor the energy usage per outlet on. I have the OID but I would have to make a custom OID per outlet. I get Current, Power and Voltage today in Observium, but not the energy. .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11 A user resettable energy meter measuring Rack PDU load energy consumption in tenths of kilowatt-hours Is there a way to add a custom OID that collects an index? .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.1 .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.2 .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.3 .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.4...14...24... Putput from one of the PDU's, this is 2 PDU's linked by a serial cable, only 5 cables attached now, but 2x24 outlets. OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.1 Value: 908 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.2 Value: 464 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.3 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.4 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.5 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.6 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.7 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.8 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.9 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.10 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.11 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.12 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.13 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.14 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.15 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.16 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.17 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.18 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.19 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.20 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.21 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.22 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.23 Value: 435 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.24 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.25 Value: 904 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.26 Value: 479 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.27 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.28 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.29 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.30 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.31 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.32 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.33 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.34 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.35 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.36 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.37 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.38 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.39 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.40 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.41 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.42 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.43 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.44 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.45 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.46 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.47 Value: 0 Type: Integer OID: .1.3.6.1.4.1.318.1.1.26.9.4.3.1.11.48 Value: 0 Type: Integer Med Vänlig Hälsning Fredrik Winäs tel +46 31 762 02 43 fredrik.winas(a)cgit.se<mailto:fredrik.winas@cgit.se> www.cgit.se<http://www.cgit.se/> CGit AB Taljegårdsgatan 11C SE-431 53 Mölndal [cid:image001.png@01D2E8EA.EC76B6C0] [cid:image002.png@01D2E8EA.EC76B6C0]

2 1

how to get MAX /95th in command line
by Denis Granato 19 Jun '17

19 Jun '17

Good afternoon When I have to make some reports of my wan links, I enter one by one, select the date that I want and get the MAX and 95th values. Can I do this with scripts at command line? tks in advance

2 1

New versions for CE
by Nurbek Suleimanov 18 Jun '17

18 Jun '17

Hi Dear Observium team, Please tell me about upgrade for new version Observium CE. when update date? Thanks. Best regards, Nurbek Suleimanov Leading Engineer of the Internet Service JSC Transtelecom, KZ, Astana, Konaeva 10 Work phone: +7 7172 610 912 Mob. phone: +7 701 66 22 33 4 skype: nfastik

1 0

Hardisk Space not tally with Oberservium
by Idzma Zakaria 18 Jun '17

18 Jun '17

Hi , Im monitoring one of our equipment running on windows 7 .As what I saw is the storage space is not tally as what it shown in the windows 7 hardisk space. Below is the details On the PC Windows 7 shown But in Observium Anything that I need to tweak of? -- Kind regards, Idzma Zakaria, ICT Senior Executive ---------------------------------------------------------------------------------------------------------- Australian International School Malaysia (AISM) No.22 Jalan Anggerik, The Mines Resort City, 43300 Seri Kembangan, Selangor, Malaysia. *T:* +60 3 8949 5000 *F*: +60 3 8949 5100 *E*: idzmaz(a)aism.edu.my *W*: http://www.aism.edu.my/ *Direct Line*: ---------------------------------------------------------------------------------------------------------- <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <http://www.youtube.com/user/AISMvideos> <http://www.youtube.com/user/AISMvideos> <http://www.youtube.com/user/AISMvideos> <http://www.youtube.com/user/AISMvideos> <http://www.youtube.com/user/AISMvideos> <http://www.youtube.com/user/AISMvideos> <https://twitter.com/AISMalaysia/> <https://twitter.com/AISMalaysia/> <https://twitter.com/AISMalaysia/> <https://twitter.com/AISMalaysia/> <https://twitter.com/AISMalaysia/> <https://twitter.com/AISMalaysia/> <http://www.aism.edu.my/virtualtour> <http://www.aism.edu.my/virtualtour> <http://www.aism.edu.my/virtualtour> <http://www.aism.edu.my/virtualtour> <http://www.aism.edu.my/virtualtour> <http://www.aism.edu.my/virtualtour> -- *Confidentiality Disclaimer:* This e-mail and any attachments are confidential and intended solely for the intended addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the intended addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose, distribute or otherwise act in reliance upon any part of this e-mail or its attachments. Australian International School Malaysia and all affiliates under Taylor's Education Group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party in reliance to this email, or from the transmission of any viruses. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Australian International School Malaysia and all affiliates under Taylor's Education Group. Replies to this e-mail may be monitored by Australian International School Malaysia and all affiliates under Taylor's Education Group for operational or business reasons.

2 2

ERR_EMPTY_RESPONSE - bug?
by Давыдов Денис 17 Jun '17

17 Jun '17

Hello everybody! We use Observium Subscription Edition Version: Observium 17.5.8580 (stable) SVN info: [root@tnobspapp01 observium]# svn info Path: . Working Copy Root Path: /opt/observium URL: http://svn.observium.org/svn/observium/branches/stable Repository Root: http://svn.observium.org/svn Repository UUID: 61d68cd4-352d-0410-923a-c4978735b2b8 Revision: 8662 Node Kind: directory Schedule: normal Last Changed Author: adama Last Changed Rev: 8580 Last Changed Date: 2017-05-28 15:05:18 +0300 (Sun, 28 May 2017) OS: [root@tnobspapp01 ~]# cat /etc/redhat-release CentOS Linux release 7.3.1611 (Core) Kernel: [root@tnobspapp01 ~]# uname -a Linux tnobspapp01 3.10.0-514.16.1.el7.x86_64 #1 SMP Wed Apr 12 15:04:24 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux Selinux: [root@tnobspapp01 observium]# getenforce Permissive PHP version: [root@tnobspapp01 ~]# php -v PHP 7.0.19 (cli) (built: May 12 2017 21:01:27) ( NTS ) Copyright (c) 1997-2017 The PHP Group Zend Engine v3.0.0, Copyright (c) 1998-2017 Zend Technologies with Zend OPcache v7.0.19, Copyright (c) 1999-2017, by Zend Technologies Apache version: [root@tnobspapp01 ~]# httpd -v Server version: Apache/2.4.6 (CentOS) Server built: Apr 12 2017 21:03:28 Problem: In browser (Chrome, IE, Firefox): Devices -> All devices -> Choose any device -> Properties -> choose MIBs or Modules = This page isn't working ERR_EMPTY_RESPONSE In Apache access log: 172.XX.XX.XX - - [15/Jun/2017:10:43:45 +0300] "GET /device/device=530/tab=edit/section=modules/ HTTP/1.1" 200 134939 "-" "Mozilla/5.0 (Windows NT 6.3; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/58.0.3029.110 Safari/537.36" 172.XX.XX.XX - - [15/Jun/2017:10:46:22 +0300] "GET /device/device=530/tab=edit/section=mibs/ HTTP/1.1" 200 157018 "-" "Mozilla/5.0 (Windows NT 6.3; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/58.0.3029.110 Safari/537.36" What is it? Bug? Please help me. Best regards, Davydov Denis

2 1

Telegram Alerts no longer working after Update
by Gumilar Siegfried 16 Jun '17

16 Jun '17

Hello! I have updated Observium to the latest subscription edition (17.6.8663) today. Since the update our telegram alerts are not working properly. We only get a single zero as text: Before: ALERT : Port down Device: xyz Entity: Port 13 Description: xyz Device Uptime: 1 year, 118 days, 9h 28s More information: http://observium.tkswf.at/device/device=8/tab=alert/alert_entry=16267/ After: 0

1 0

email alerts not working after update to r8661
by Chris Smith 15 Jun '17

15 Jun '17

After we update Observium subscription version from r8637 to r8661 emailed alerts are no longer working. Alerts are still logged in the alert log, however the "Notified" status says "No" and no emails are generated. Used the test_alert.php util and at the bottom it ends with an error about a missing include. Output: observium]$ sudo -u apache ./test_alert.php -a 35069 -dd DEBUG! Load class 'Console_Color2' from '/u1/observium/libs/pear/Console/Color2.php': OK SQL[SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'dbSchema';] ROWS[1] SQL RUNTIME[0.00008607s] SQL[SELECT @@SESSION.sql_mode;] ROWS[1] SQL RUNTIME[0.00008798s] SQL[SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'current_rev';] ROWS[1] SQL RUNTIME[0.00027394s] SQL[SELECT * FROM `config`] ROWS[0] SQL RUNTIME[0.00005698s] Load class 'Net_IPv6' from '/u1/observium/libs/pear/Net/IPv6.php': OK CACHE DISABLED. Disabled in config. Observium 17.6.8661 Test Alert Notification CMD[/u1/observium/scripts/distro] Wrong process status! Issue in proc_get_status(), see: https://bugs.php.net/bug.php?id=69014 CMD EXITCODE[0] CMD RUNTIME[0.0379s] STDOUT[ Linux|2.6.32-642.13.1.el6.x86_64|amd64|CentOS|6.8|none ] CMD[/usr/bin/env python --version 2>&1] CMD EXITCODE[0] CMD RUNTIME[0.0213s] STDOUT[ Python 2.6.6 ] SQL[SELECT version();] ROWS[1] SQL RUNTIME[0.00012589s] CMD[/usr/bin/snmpget --version 2>&1] CMD EXITCODE[0] CMD RUNTIME[0.0038s] STDOUT[ NET-SNMP version: 5.5 ] CMD[/usr/bin/rrdtool --version | head -n1] CMD EXITCODE[0] CMD RUNTIME[0.0046s] STDOUT[ RRDtool 1.3.8 Copyright 1997-2009 by Tobias Oetiker <tobi(a)oetiker.ch> ] CMD[/usr/bin/env apache2 -v | awk '/Server version:/ {print $3}'] CMD EXITCODE[0] CMD RUNTIME[0.0089s] STDOUT[ ] CMD[/usr/sbin/httpd -v | awk '/Server version:/ {print $3}'] CMD EXITCODE[0] CMD RUNTIME[0.0409s] STDOUT[ Apache/2.2.15 ] CMD[date "+%:z"] CMD EXITCODE[0] CMD RUNTIME[0.0127s] CMD EXITDELAY[10ms] STDOUT[ -04:00 ] SQL[SELECT TIMEDIFF(NOW(), UTC_TIMESTAMP);] ROWS[1] SQL RUNTIME[0.00018001s] SQL[SELECT @@SESSION.sql_mode;] ROWS[1] SQL RUNTIME[0.00011206s] SQL[SHOW VARIABLES LIKE 'character_set_connection'] ROWS[1] SQL RUNTIME[0.00039697s] ##### Software versions ##### o OS Linux 2.6.32-642.13.1.el6.x86_64 [amd64] (CentOS 6.8) o Apache 2.2.15 o PHP 5.6.30 o Python 2.6.6 o MySQL 5.1.73 (extension: mysqli 5.0.11-dev) o SNMP NET-SNMP 5.5 o RRDtool 1.3.8 ##### Memory Limit ##### o PHP 256B ##### MySQL mode ##### o MySQL ##### Charset info ##### o PHP UTF-8 o MySQL utf8 ##### Timezones info ##### o Date Wednesday, 14-Jun-17 19:37:27 EDT o PHP -04:00 o MySQL -04:00 SQL[SELECT * FROM `alert_tests` WHERE 1] ROWS[18] SQL RUNTIME[0.00012898s] Cached 18 alert rules. SQL[SELECT * FROM `alert_assoc`] ROWS[37] SQL RUNTIME[0.00009298s] SQL[SELECT * FROM `alert_table` WHERE `alert_table_id` = '35069'] ROWS[1] SQL RUNTIME[0.00028110s] SQL[SELECT * FROM `devices` WHERE `device_id` = '84'] ROWS[1] SQL RUNTIME[0.00022697s] SQL[SELECT * FROM `device_graphs` WHERE `device_id` = '84'] ROWS[21] SQL RUNTIME[0.00006294s] SQL[SELECT * FROM `ports` WHERE `ports`.`port_id` = '2966'] ROWS[1] SQL RUNTIME[0.00027490s] > $graphtype /u1/observium/html/includes/graphs/graph.inc.php:33 array( [0] => string(9) "port_bits" [type] => string(4) "port" [1] => string(4) "port" [subtype] => string(4) "bits" [2] => string(4) "bits" ) SQL[SELECT * FROM `ports` WHERE `ports`.`port_id` = '2966'] ROWS[1] SQL RUNTIME[0.00011206s] Load class 'Net_IPv4' from '/u1/observium/libs/pear/Net/IPv4.php': OK RRD PIPE OPEN[TRUE] RRD PIPE CLOSE[TRUE] RRD PIPE STDOUT[ OK u:0.03 s:0.00 r:0.11 ] RRD CMD[graph /tmp/mTymlIwqPU80Uriu.png <edited_out_giant_rrd_command.....>] RRD RUNTIME[0.1122s] RRD STDOUT[481x204] RRD_STATUS[TRUE] SQL[SELECT `attrib_value` FROM `entity_attribs` WHERE `entity_type` = 'device' AND `entity_id` = '84' AND `attrib_type` = 'disable_notify'] ROWS[0] SQL RUNTIME[0.00063896s] SQL[SELECT * FROM `alert_contacts` WHERE `contact_disabled` = 0 AND `contact_id` IN (SELECT `contact_id` FROM `alert_contacts_assoc` WHERE `aca_type` = 'alert' AND `alert_checker_id` = '19');] ROWS[0] SQL RUNTIME[0.00005817s] o Missing include /u1/observium/includes/alerting/.inc.php

2 3

Synology UPS-MIB
by Torstein Eide 15 Jun '17

15 Jun '17

Hi The Synology UPS-MIB in \observium\mibs\synology, does not show up in [image: Innebygd bilde 1] how can i add it? -- Torstein Eide Torsteine(a)gmail.com

4 5

Possible bug with BGP IPv6 sessions state alert checker
by Youssef BENGELLOUN - ZAHR 15 Jun '17

15 Jun '17

7 37

Netscaler vserver missing info on 8576
by Jay Christopher 14 Jun '17

14 Jun '17

Hey, I've noticed that vservers on Netscalers are missing the "Type" (load balancing, content switching) and the services under the vserver don't show up. I attached two screenshots of the same vsever running on different versions. Noticed that one shows the services and the other one doesn't. -- Jay

2 3