- observium - lists.observium.org

Fortigate multiple CPU's not showing
by Richard Savage 23 Mar '17

23 Mar '17

Hi We have lots of fortigates monitored in observium (running rolling version 17.3.8418) and most of them have multiple CPU's (depends which model depends on what CPUs it has). Observium only shows 1 CPU but when looking at the fortigate we can see there are numerous CPU's. (eg. the one ive shown below is a Fortigate 1000D which has 8 CPU's but observium only shows 1). Is this fixable so that observium shows all the CPU's? Observium screenshot: Fortigate screenshot: Many Thanks Rich

3 5

Alerting and device adding broken after update
by Matt Zillmann 22 Mar '17

22 Mar '17

Adam, We have the Subscription edition of Observium and yesterday I upgraded to the latest build. After the build update was completed, I also updated my php version from 5.4.16 to 5.6.30 . After doing this, I am no longer getting email alerts and cannot add new devices. Any idea to what has went wrong here? What next step should I take? Thank you, Matt Zillmann Network Administrator Office: 216-251-2510 mzillmann(a)testoil.com<mailto:mzillmann@testoil.com> [testoilnewlogo_Email] ISO/IEC 17025:2005

2 1

Filter BGP Sessions by Address Family
by Gumilar Siegfried 22 Mar '17

22 Mar '17

Hello, Could you please add the possibility to filter the BGP Sessions by Address Family (IPv4/IPv6)? It would make sense to add it in the highlighted area: [cid:image003.jpg@01D2A324.D1300120] Thanks! Regards, Siegfried

1 0

CAN YOU HELP
by Dominique THIERRY 22 Mar '17

22 Mar '17

Hi, We have purchased a OBSERVIUM PROFESSIONAL in your webshop. But we can’t connect with our username or our password. We have purchased with the following informations: Username jean-yves.kerjan(a)virbac.com password: aptn000111 Can you please reply to the email adresses below,and give us informations about our connection. aptn2(a)wanadoo.fr jean-yves.kerjan(a)virbac.com Thank you. Best regards Dominique THIERRY APTN EQUIPEMENT INDUSTRIE 3 rue des Saunelles 91150 ORMOY LA RIVIERE Tel 0164903001 aptn2(a)wanadoo.fr --- L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast. https://www.avast.com/antivirus

2 1

SUBSCRIPTION PROBLEM
by Jamil Al Badri 22 Mar '17

22 Mar '17

Dear everybody, I am contacting you today, because we subscribed to your platform on the 8th of February for one of our clients, after trying many ways he can't login, this problem has been going on far too long and a solution is required here, That is why I would be so grateful if you could send me a phone number so that I can call your support service and check out the problem together step by step, Cordialement, Best regards [cid:image001.png@01D2A317.9C41A9D0] Jamil AL BADRI Achats/Purchase jamil.albadri(a)logitrade.fr<mailto:jamil.albadri@logitrade.fr> Tél. : + 33 (0)4 99 52 40 76 LOGITRADE Siège : Parc d'Activités Jean Mermoz, 52 rue Georges Guynemer, CS 70052, 34170 Castelnau-le-Lez Standard : 04 99 52 40 00 / Fax : 04 99 52 40 10 - www.logitrade.fr<http://www.logitrade.fr/> Adoptez l'éco-attitude, n'imprimez ce mail que si cela est vraiment nécessaire.

2 1

MS Teams
by John Klasa 22 Mar '17

22 Mar '17

Hi, any plans for MS Teams Web hooks support like for Slack in Observium? __________________________________________________ [http://itiviti.com/email_signature_logo.gif]<http://www.itiviti.com/> John Klasa Managed Services, Itiviti Direct: +46 8 506 478 46 John.Klasa(a)itiviti.com<%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20mailto:John.Klasa@itiviti.com> Kungsgatan 36 , P.O. Box 7742 10395 Stockholm , Sweden Fax: +46 8 506 477 01 Visit: itiviti.com > <http://www.itiviti.com> Read the latest news from Itiviti > <http://www.itiviti.com/news/>

2 2

Testing Observium CE 0.16.10.8128 on Linux 4.4.0-1009-raspi2
by Richard Reitenauer 21 Mar '17

21 Mar '17

I have a Raspberry PI3 device that I am testing Observium CE on before buying the subscription version. However, I added a cisco device that supports VRFs and the page shows 5 but it is blank. I have an Observium CE 0.16.10.8128 running on a turnkey appliance and that is running fine....though the OS is Debian 8.4. The BGP page loads fine. Haven't seen any other issues as of yet. Raspberry PI install info: Version Information Observium CE 0.16.10.8128 (6th October 2016) OS Linux 4.4.0-1009-raspi2 [armv7l] (Ubuntu 16.04) Apache 2.4.18 (Ubuntu) PHP 7.0.15-0ubuntu0.16.04.4 (OPcache: ENABLED) Python 2.7.12 MySQL 5.7.17-0ubuntu0.16.04.1 (extension: mysqli 5.0.12-dev) SNMP NET-SNMP 5.7.3 RRDtool 1.5.5 Turnkey Appliance Info: Observium CE 0.16.10.8128 (6th October 2016) OS Linux 3.16.0-4-amd64 [amd64] (Debian 8.4) Apache Apache PHP 5.6.30-0+deb8u1 (OPcache: ENABLED) Python 2.7.9 MySQL 5.5.54-0+deb8u1 (extension: mysqli 5.5.54) SNMP NET-SNMP 5.7.2.1 RRDtool 1.4.8

1 0

Testing Observium CE 0.16.10.8128 on Linux 4.4.0-1009-raspi2
by Richard Reitenauer 21 Mar '17

21 Mar '17

I have a Raspberry PI3 device that I am testing Observium CE on before buying the subscription version. However, I added a cisco device that supports VRFs and the page shows 5 but it is blank. I have an Observium CE 0.16.10.8128 running on a turnkey appliance and that is running fine....though the OS is Debian 8.4. The BGP page loads fine. Haven't seen any other issues as of yet. Raspberry PI install info: Version Information Observium CE 0.16.10.8128 (6th October 2016) OS Linux 4.4.0-1009-raspi2 [armv7l] (Ubuntu 16.04) Apache 2.4.18 (Ubuntu) PHP 7.0.15-0ubuntu0.16.04.4 (OPcache: ENABLED) Python 2.7.12 MySQL 5.7.17-0ubuntu0.16.04.1 (extension: mysqli 5.0.12-dev) SNMP NET-SNMP 5.7.3 RRDtool 1.5.5 Turnkey Appliance Info: Observium CE 0.16.10.8128 (6th October 2016) OS Linux 3.16.0-4-amd64 [amd64] (Debian 8.4) Apache Apache PHP 5.6.30-0+deb8u1 (OPcache: ENABLED) Python 2.7.9 MySQL 5.5.54-0+deb8u1 (extension: mysqli 5.5.54) SNMP NET-SNMP 5.7.2.1 RRDtool 1.4.8

1 0

reverse proxy
by Andrew Meyer 21 Mar '17

21 Mar '17

I'm trying to setup nginx to proxy all my web requests. Here is my config so far: location /observium { index index.html index.htm index.php; access_log off; # rewrite ^(.+)$ /index.php/$1/ last; error_page 404 502 504 = @fallback; proxy_set_header Host web001.borg.local; proxy_pass http://10.150.1.78; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } I am getting the php config error when I got to the site. Any help would be appreciated!

1 0

Observium Spiky Graphs
by Andres P 20 Mar '17

20 Mar '17

Hi People, I'm using Observium Subscriber edition version 17.2.8364 (15th February 2017) and I've noticed observium is having many graphs with spike. It doesnt matter the vendor brand, it happens with Cisco and Force10 Exascale E1200i. Anyone has the same problem? *FORCE10 Example* [image: Inline image 1] *Cisco 2960X Example:* *[image: Inline image 6]* *Polling Information:* [image: Inline image 2] Regads Andres

1 0

Fwd: Lost data?
by Olivier CALVANO 20 Mar '17

20 Mar '17

Hi We have two observium server, physical server is identique (IBM, same CPU, same memory, same hd and same observium version) On one, and only one i have a problems: There are holes in the graphics Someone would have suggestions to correct this problem? sample of graph: http://hpics.li/181aa34 thanks for your help Olivier

2 1

Vrf polling question
by Jan Horacek 18 Mar '17

18 Mar '17

Good morning guys during implementation observium I experienced issue with vrf polling I can't solve and also didn't find respective answer in forums. Let me introduce problem itself. We have Cisco based network with big number of vrfs. Every single vrf doesn't have only one RD, but unique RD per device. Even this last octet on all distinguishers is same so for example Vrf 1 on R1 is rd 1.1.1.1 Vrf 1 on R2 is rd 1.1.1.2 Is it possible somehow edit web interface to show all vrfs grouped by name or last rd octet as primary key, because right now I see in observium big bunch duplicated vrfs. Hope my trouble is understandable and some solution exists. Thanks Jan

1 0

Re: [Observium] No valid device specified
by Dario Schmitt 17 Mar '17

17 Mar '17

2 1

No valid device specified
by John May 17 Mar '17

17 Mar '17

First time I've run into this issue... I added a device. It shows up fine in the device hitlist. But when I click on the device name for details I get: "No valid device specified A valid device was not specified in the URL. Please retype and try again." Any idea why this would be occurring? No way to delete/readd the device too because of this. Any help appreciated! - John -- ------------------------------------------------------------------- John May : President http://www.pointinspace.com/ Point In Space Internet Solutions 800.664.8610 919.338.8198

6 10

Observium LDAP with TLS
by Vlad Kratsberg 17 Mar '17

17 Mar '17

Hello, We are trying to enable TLS on top of ldap connections. Once, i change startls to FALSE or required $config['auth_ldap_starttls'] = TRUE; $config['auth_ldap_starttls'] = 'required'; I get the following message: [image: Inline image 1] What does it mean exactly ? Version mismatch ? Cert error ? When I check packet capture, i see the following: [image: Inline image 2] And inside the client response ( packet # 9 ), there is this: [image: Inline image 3] Does it mean that observium can't find a certificate ? If so, which directory should i place certs ? I have another app on the same box that is using ldap with tls and it is working just fine. Also, what TLS versions are supported by observium ? Has anybody experienced the same issue ? Were you able to resolve it ? Appreciate your responses. Thank you

3 5

Re: [Observium] No valid device specified
by John May 17 Mar '17

17 Mar '17

OK, nevermind, now it's working. Odd. - John On 3/17/17 12:30 PM, John May wrote: > P.S. Using Observium Professional 17.2.8364 on CentOS 6.8 with PHP 7.0.16. > > - John > > >> First time I've run into this issue... >> >> I added a device. It shows up fine in the device hitlist. But when I >> click on the device name for details I get: >> >> "No valid device specified >> A valid device was not specified in the URL. Please retype and try >> again." >> >> >> Any idea why this would be occurring? No way to delete/readd the device >> too because of this. Any help appreciated! >> >> - John >> -- ------------------------------------------------------------------- John May : President http://www.pointinspace.com/ Point In Space Internet Solutions 800.664.8610 919.338.8198

1 0

Re: [Observium] No valid device specified
by John May 17 Mar '17

17 Mar '17

P.S. Using Observium Professional 17.2.8364 on CentOS 6.8 with PHP 7.0.16. - John > First time I've run into this issue... > > I added a device. It shows up fine in the device hitlist. But when I > click on the device name for details I get: > > "No valid device specified > A valid device was not specified in the URL. Please retype and try again." > > > Any idea why this would be occurring? No way to delete/readd the device > too because of this. Any help appreciated! > > - John > -- ------------------------------------------------------------------- John May : President http://www.pointinspace.com/ Point In Space Internet Solutions 800.664.8610 919.338.8198

1 0

PHP 7.1.2 rrdtool_update_ng
by Sir l33tname 17 Mar '17

17 Mar '17

I switch to the latest php version and suddenly all graphs stopped working. (I'm not really sure that this is the reason) But if anyone have the same problem my stacktraces and how I fixed it with changing the line 484 in /usr/local/www/observium/includes/rrdtool.inc.php from function rrdtool_update_ng($device, $type, $ds, $index, $create = TRUE) to function rrdtool_update_ng($device, $type, $ds, $index = NULL, $create = TRUE) If anyone have an idea why this is broken or if I'm using it wrong or has more infos on this would be nice. stacktrace: /usr/local/www/observium # /usr/bin/env php /usr/local/www/observium/poller.php -d -h 1 ##### Software versions ##### o OS FreeBSD GENERIC [amd64] ( 11.0-RELEASE-p2) o Apache 2.4.25 o PHP 7.1.2 o Python 3.6.0 o MySQL 10.1.21-MariaDB (extension: mysqli 5.0.12-dev) o SNMP NET-SNMP 5.7.3 o RRDtool 1.6.0 o Device status Device is reachable by PING (2.31ms) and SNMP (17.58ms) PHP Fatal error: Uncaught ArgumentCountError: Too few arguments to function rrdtool_update_ng(), 3 passed in /usr/local/www/observium/includes/polling/functions.inc.php on line 566 and at least 4 expected in /usr/local/www/observium/includes/rrdtool.inc.php:484 Stack trace: #0 /usr/local/www/observium/includes/polling/functions.inc.php(566): rrdtool_update_ng(Array, 'status', Array) #1 /usr/local/www/observium/poller.php(170): poll_device(Array, Array) #2 {main} thrown in /usr/local/www/observium/includes/rrdtool.inc.php on line 484 Fatal error: Uncaught ArgumentCountError: Too few arguments to function rrdtool_update_ng(), 3 passed in /usr/local/www/observium/includes/polling/functions.inc.php on line 566 and at least 4 expected in /usr/local/www/observium/includes/rrdtool.inc.php:484 Stack trace: #0 /usr/local/www/observium/includes/polling/functions.inc.php(566): rrdtool_update_ng(Array, 'status', Array) #1 /usr/local/www/observium/poller.php(170): poll_device(Array, Array) #2 {main} thrown in /usr/local/www/observium/includes/rrdtool.inc.php on line 484

3 6

Xinetd for UNIX Agent
by Robbie Wright 16 Mar '17

16 Mar '17

Having an issue getting the agent to behave itself on a server. Getting this error when looking at xinetd status: Must specify a server in observium_agent I double checked all of the file locations and they are all correct. We have the unix agent running on other servers with an issue, this one is just being challenging. Has anyone else seen an error like that before? Robbie Wright Siuslaw Broadband <https://siuslawbroadband.com> 541-902-5101 <(541)%20902-5101>

4 7

display all devices in frontpage
by Ridwan Firmansyah 16 Mar '17

16 Mar '17

Hi list, how to add more device_status in front_page observium, I have four devices registered but only 2 device displayed in front_page. see attached for details. rgds RIdwan

2 1

Observium compatibility as mobile apps
by Idzma Zakaria 16 Mar '17

16 Mar '17

Hi, I just create a mobile apps for observium but the page webview seem not capable for mobile viewing.It just a normal webview ( as seen on normal monitor). Is it can be done as for adaptive web design to suit mobile viewing?Any adjustments to the page itself? An advice really appreciated. Thank you. -- *Confidentiality Disclaimer:* This e-mail and any attachments are confidential and intended solely for the intended addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the intended addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose, distribute or otherwise act in reliance upon any part of this e-mail or its attachments. Australian International School Malaysia and all affiliates under Taylor's Education Group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party in reliance to this email, or from the transmission of any viruses. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Australian International School Malaysia and all affiliates under Taylor's Education Group. Replies to this e-mail may be monitored by Australian International School Malaysia and all affiliates under Taylor's Education Group for operational or business reasons.

2 2

alert checkers excluding device types
by Tomasz Karczewski 15 Mar '17

15 Mar '17

Hi, Simple question how to exclude for ex ample device types like servers from alert checkers? J Tomasz Karczewski Administrator Sieci olman tkarczewski(a)man.olsztyn.pl http://www.man.olsztyn.pl http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie

2 2

Cisco ASA 9.4(3)6 Remote Access Sessions
by Richard Reitenauer 14 Mar '17

14 Mar '17

I am currently using the latest community edition and looking to go to the professional subscription. With a Cisco ASA 9.4(3)6 and graphing the Remote Access Sessions, I am seeing odd data and it looks like others have had the same issue for a couple years now. I attached a screenshot of what I am seeing. >From Cisco CLI - show vpn-sessiondb anyconnect summary: VPN Session Summary --------------------------------------------------------------------------- Active : Cumulative : Peak Concur : Inactive ---------------------------------------------- AnyConnect Client : 96 : 8582 : 101 : 3 SSL/TLS/DTLS : 96 : 8582 : 101 : 3 >From Observium interface snapshot is attached. Is there any fix for this? Also, can we graph per anyconnect group? Thanks, Rich Reitenauer Sr. Infrastructure Analyst 1 Meridian Blvd, Suite 2C01 Wyomissing, PA 19610 O: 610-373-7999 x1255 rreitenauer(a)ugies.com<mailto:rreitenauer@ugies.com>

1 0

Custom OID
by Canto José 14 Mar '17

14 Mar '17

Hello, I implemented some custom OID (gauge), is it possible to define also Alertchecks on this custom OID? Thanks in advanced Best regards José

1 0

Minor graph problems
by William Bauer 14 Mar '17

14 Mar '17

Ever since I moved our installation from CentOS6 with PHP 5.6 to CentOS7 (7.3) with PHP 7.0, I've noticed that the MRTG, "Graph Maximum" and "Graph Trend" menu items don't do anything. All of them used to work great. Is this enough information to signal to anyone what particular PHP package or PHP configuration entry might have been missed? I'm hoping the combination of these three is a smoking gun that signals "X is missing". Thanks.

2 4