- observium - lists.observium.org

Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
by Youssef BENGELLOUN - ZAHR 02 Feb '17

02 Feb '17

5 24

Observium - limitations user/device
by Uthayanan 02 Feb '17

02 Feb '17

Hi team, Is there any limitation on (1)number of user accounts (2) number of devices that I can add in observium? Please note that I have installed it in a virtualized environment and I do not have any limitations on physical resources ! Thanks Uthay

2 2

Re: [Observium] Dell PowerConnect 5324 and 3548
by hansb＠bennesen.co.uk 01 Feb '17

01 Feb '17

Hi Mike You are absolutely right. It is down to snmp support on the switch itself - Observium works OK. Thanks for your help. I found articles like this which describe the problem: http://en.community.dell.com/support-forums/network-switches/f/866/t/177350… Mike Stupalov <mike(a)observium.org> wrote .. > Hi, > > seems as too old firmware with HC counters issue: > > ports detected as 64bit, because have ifHCInOctets/ifHCOutOctets oids, > but not have any 64bit counters for Pkts (which should be): > ifHCInUcastPkts/ifHCOutUcastPkts, > ifHCInBroadcastPkts/ifHCOutBroadcastPkts, > ifHCInMulticastPkts/ifHCOutMulticastPkts > > currently no ways for use 64bit counters for octets, but 32bit for pkts.. > > Update firmware on your devices.. > > On 30.01.17 18:40, hansb(a)bennesen.co.uk wrote: > > Thanks Mike, > > > > Debug log from polling Dell switch > > > > Regards Hans > > > > > > > > Mike Stupalov <mike(a)observium.org> wrote .. > >> Hi, > >> > >> please show/attach debug poller output for such device: > >> > >> ./poller.php -d -m ports -h <device> > >> > >> On 30.01.17 17:18, hansb(a)bennesen.co.uk wrote: > >>> Hi All > >>> > >>> I am testing Observium, but I am having a problem with different models of > Dell > >> PowerConnect switches. > >>> The counters like Unicast / Non Unicast packets does not seem to update correctly, > >> but work fine on Netgear and Cisco switches. > >>> When debugging I can see that snmp poll picks up the data > >>> ifInMulticastPkts.1 = 820013 > >>> ifInMulticastPkts.2 = 689375 > >>> ifInMulticastPkts.3 = 0 > >>> ifInMulticastPkts.4 = 0 > >>> ifInMulticastPkts.5 = 0 > >>> > >>> Then in the SQL UPDATE command the counters are either 0 or empty - any ideas? > >>> > >>> SQL UPDATE `ports` set `poll_time` ='1485773865',`poll_period` ='149',`ifInOctets` > >> ='14157050456',`ifInOctets_rate` ='2900.8255033557',`ifOutOctets` ='74622251693',`ifOutOctets_rate` > >> ='12147.88590604',`ifInErrors` ='1',`ifInErrors_rate` ='0',`ifInErrors_delta` > ='0',`ifOutErrors` > >> ='0',`ifOutErrors_rate` ='0',`ifOutErrors_delta` ='0',`ifInUcastPkts` ='',`ifInUcastPkts_rate` > >> ='0',`ifOutUcastPkts` ='',`ifOutUcastPkts_rate` ='0',`ifInNUcastPkts` ='0',`ifInNUcastPkts_rate` > >> ='0',`ifOutNUcastPkts` ='0',`ifOutNUcastPkts_rate` ='0',`ifInBroadcastPkts` > ='',`ifInBroadcastPkts_rate` > >> ='0',`ifOutBroadcastPkts` ='',`ifOutBroadcastPkts_rate` ='0',`ifInMulticastPkts` > >> ='',`ifInMulticastPkts_rate` ='0',`ifOutMulticastPkts` ='',`ifOutMulticastPkts_rate` > >> ='0',`ifInDiscards` ='0',`ifInDiscards_rate` ='0',`ifOutDiscards` ='0',`ifOutDiscards_rate` > >> ='0',`ifInOctets_perc` ='0',`ifOutOctets_perc` ='0',`ifOctets_rate` ='15048.711409396',`ifUcastPkts_rate` > >> ='0',`ifErrors_rate` ='0' WHERE `port_id`! > >>> = '175' > >>> > >>> In the database table field port_mcbc = 1 > >>> > >>> > >>> Kind regards > >>> Hans > >>> > >>> > >>> _______________________________________________ > >>> observium mailing list > >>> observium(a)observium.org > >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >> > >> > >> -- > >> Mike Stupalov > >> http://observium.org > >> > >> > >> _______________________________________________ > >> observium mailing list > >> observium(a)observium.org > >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > > -- > Mike Stupalov > http://observium.org

1 0

Graph aggregation on Observium guideline
by Sophanith Chhom 01 Feb '17

01 Feb '17

Hi All, Since I am new to Observium and I'm not quite sure if we can do like a graph aggregation like Cacti does on Group feature in Observium? Just like on Cacti, we can do a graph aggregation on different nodes/hosts and I try to look around on Group features on Observium and still not found the way yet. If it is possible, can anyone share me the guideline pls? Thanks so much for your help.

1 1

Weathermap graph guideline
by Sophanith Chhom 01 Feb '17

01 Feb '17

Hi All, I am just a new for Observium and looking it to replace Cacti. I am looking a guide fro Weathermap setup but it seems not useful how to add node/graph. Can you sent link for instruction to do it or guide please? Thanks,

6 8

Weathermap accessing keep loading sometimes
by Sophanith Chhom 01 Feb '17

01 Feb '17

Hi All, Anyone used to have experience like me? [image: Inline image 1] It keeps loading when i try to play around my weathermap, anything to fix it? Thanks

1 0

Observium graph aggregation guide
by Sophanith Chhom 31 Jan '17

31 Jan '17

Hi All, I just purchased the Observium Pro, so anyone can guide or share me for graph aggregation on it pls? As I have known so far it should be something done on Group, but I am not sure how to do it. Thanks so much.

1 0

Re: [Observium] Dell PowerConnect 5324 and 3548
by hansb＠bennesen.co.uk 30 Jan '17

30 Jan '17

Thanks Mike, Will try updating switch firmware Mike Stupalov <mike(a)observium.org> wrote .. > Hi, > > seems as too old firmware with HC counters issue: > > ports detected as 64bit, because have ifHCInOctets/ifHCOutOctets oids, > but not have any 64bit counters for Pkts (which should be): > ifHCInUcastPkts/ifHCOutUcastPkts, > ifHCInBroadcastPkts/ifHCOutBroadcastPkts, > ifHCInMulticastPkts/ifHCOutMulticastPkts > > currently no ways for use 64bit counters for octets, but 32bit for pkts.. > > Update firmware on your devices.. > > On 30.01.17 18:40, hansb(a)bennesen.co.uk wrote: > > Thanks Mike, > > > > Debug log from polling Dell switch > > > > Regards Hans > > > > > > > > Mike Stupalov <mike(a)observium.org> wrote .. > >> Hi, > >> > >> please show/attach debug poller output for such device: > >> > >> ./poller.php -d -m ports -h <device> > >> > >> On 30.01.17 17:18, hansb(a)bennesen.co.uk wrote: > >>> Hi All > >>> > >>> I am testing Observium, but I am having a problem with different models of > Dell > >> PowerConnect switches. > >>> The counters like Unicast / Non Unicast packets does not seem to update correctly, > >> but work fine on Netgear and Cisco switches. > >>> When debugging I can see that snmp poll picks up the data > >>> ifInMulticastPkts.1 = 820013 > >>> ifInMulticastPkts.2 = 689375 > >>> ifInMulticastPkts.3 = 0 > >>> ifInMulticastPkts.4 = 0 > >>> ifInMulticastPkts.5 = 0 > >>> > >>> Then in the SQL UPDATE command the counters are either 0 or empty - any ideas? > >>> > >>> SQL UPDATE `ports` set `poll_time` ='1485773865',`poll_period` ='149',`ifInOctets` > >> ='14157050456',`ifInOctets_rate` ='2900.8255033557',`ifOutOctets` ='74622251693',`ifOutOctets_rate` > >> ='12147.88590604',`ifInErrors` ='1',`ifInErrors_rate` ='0',`ifInErrors_delta` > ='0',`ifOutErrors` > >> ='0',`ifOutErrors_rate` ='0',`ifOutErrors_delta` ='0',`ifInUcastPkts` ='',`ifInUcastPkts_rate` > >> ='0',`ifOutUcastPkts` ='',`ifOutUcastPkts_rate` ='0',`ifInNUcastPkts` ='0',`ifInNUcastPkts_rate` > >> ='0',`ifOutNUcastPkts` ='0',`ifOutNUcastPkts_rate` ='0',`ifInBroadcastPkts` > ='',`ifInBroadcastPkts_rate` > >> ='0',`ifOutBroadcastPkts` ='',`ifOutBroadcastPkts_rate` ='0',`ifInMulticastPkts` > >> ='',`ifInMulticastPkts_rate` ='0',`ifOutMulticastPkts` ='',`ifOutMulticastPkts_rate` > >> ='0',`ifInDiscards` ='0',`ifInDiscards_rate` ='0',`ifOutDiscards` ='0',`ifOutDiscards_rate` > >> ='0',`ifInOctets_perc` ='0',`ifOutOctets_perc` ='0',`ifOctets_rate` ='15048.711409396',`ifUcastPkts_rate` > >> ='0',`ifErrors_rate` ='0' WHERE `port_id`! > >>> = '175' > >>> > >>> In the database table field port_mcbc = 1 > >>> > >>> > >>> Kind regards > >>> Hans > >>> > >>> > >>> _______________________________________________ > >>> observium mailing list > >>> observium(a)observium.org > >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >> > >> > >> -- > >> Mike Stupalov > >> http://observium.org > >> > >> > >> _______________________________________________ > >> observium mailing list > >> observium(a)observium.org > >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > > -- > Mike Stupalov > http://observium.org

1 0

F5 BIG-IP LTM
by Medve István 30 Jan '17

30 Jan '17

Dear All, could someone give me some advice how to graph F5 LTM's SSL client TPS ? If teher is any way ... Regards, imedve

3 5

HWg-PWR ability read kWh
by chott＠praha1.net 30 Jan '17

30 Jan '17

Hello, can i read kWh from HWg-PWR device? i my case Observium read only Voltage, Current and Power (working fine) kWh - for me example OID .1.3.6.1.4.1.21796.4.6.1.3.1.6.2.2004 where .2004 is Total T1+T2 Wh .1.3.6.1.4.1.21796.4.6.1.3.1.6.2.2005 where .2005 is Tarif T1 Wh .1.3.6.1.4.1.21796.4.6.1.3.1.6.2.2006 where .2006 is Tarif T2 Wh like INTEGER: 7642425 Wh walk root@observium:/opt/observium# snmpwalk -v2c -c lsg <IP> .1.3.6.1.4.1.21796.4.6.1.3.1.6.2.2004 iso.3.6.1.4.1.21796.4.6.1.3.1.6.2.2004 = INTEGER: 7642425 [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 733 123 135 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

3 9