- observium - lists.observium.org

Ping graphs
by H Box 03 Feb '17

03 Feb '17

Hi All, I am searching into observium to the ping graphs but cannot find them back. Is this a option to enable some where so i can see them at www.domain.net/device/device=?? It is possible to see them via www.domain.net/graph.php?type=device_ping&device=?? but this is not perfect for us, intergrade some where into the panel will be nice. Thanks for your reply. Greetings remco

2 2

New to subscription
by Bill Long 03 Feb '17

03 Feb '17

Observium, I am a new subscriber to Observium, though I have been using the CE version for about a year and a half. I was reading in the documentation that I could configure alerting via VictorOps, but I cannot seem to find where I have to setup the configuration (the menu selections are not where the screen snap in the documentation shows it to be).. Any help would be greatly appreciated.. --Bill I am using the following setup: Observium 17.1.8318 (12th January 2017) OS Linux 3.10.0-327.el7.x86_64 [amd64] (CentOS 7.3.1611) Apache 2.4.6 (CentOS) PHP/7.0.15 PHP 7.0.15 (OPcache: ENABLED) Python 2.7.5 MySQL 5.5.52-MariaDB (extension: mysqli 5.5.52-MariaDB) SNMP NET-SNMP 5.7.2 RRDtool 1.6.0?

3 4

snmp traps
by Johns, Daniel (GPK) 03 Feb '17

03 Feb '17

Hello, im new to the observium platform. I was hoping someone might point me in the direct direction on how obserium accepts snmptraps. Thanks Daniel J

3 3

New Host addition without auto adding all ports
by Lee Byatt 02 Feb '17

02 Feb '17

Hello, Good Morning. I have a fairly large deployment that I am working on and I have the need to add many hosts. I am not specifically bothered about their interface throughput so do not want them auto added on a poll of a new device. I may then go in separately for the core router and core switch/distribution switches to add interfaces/ports of specific interest and my discretion. Is there a way I can achieve this. Many thanks Best Regards, Lee Visit http://www.excellgroup.com/solutions/ to learn about our Voice, Cloud / Data, Network, Mobile and Business Centres solutions. Contact Us: http://www.excellgroup.com/contact/ This email is subject to Excell’s Email Terms & Conditions which can be found at http://www.excellgroup.com/legal-and-terms/email-terms-conditions/

2 1

Observium grouping multi ports
by Sophanith Chhom 02 Feb '17

02 Feb '17

Hi All, Is it possible to group multi ports entity match as bellow sample? ifName equals TenGigE0/0/0/0 ifName equals TenGigE0/0/0/1 ifName equals TenGigE0/0/0/2 Note: It's working fine if we only define one condition like "ifName equals TenGigE0/0/0/0" But it won't work if we combine multi like two or three as sample above. Thamks a lot for your input

4 11

Observium PRO - Feature Request
by Serghei Golipad 02 Feb '17

02 Feb '17

Adam, We are looking for monthly/weekly report for traffic accounting, are you able to give me a rough estimate on cost to develop this? Cheers PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

1 0

Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
by Youssef BENGELLOUN - ZAHR 02 Feb '17

02 Feb '17

5 24

Observium - limitations user/device
by Uthayanan 02 Feb '17

02 Feb '17

Hi team, Is there any limitation on (1)number of user accounts (2) number of devices that I can add in observium? Please note that I have installed it in a virtualized environment and I do not have any limitations on physical resources ! Thanks Uthay

2 2

Re: [Observium] Dell PowerConnect 5324 and 3548
by hansb＠bennesen.co.uk 01 Feb '17

01 Feb '17

Hi Mike You are absolutely right. It is down to snmp support on the switch itself - Observium works OK. Thanks for your help. I found articles like this which describe the problem: http://en.community.dell.com/support-forums/network-switches/f/866/t/177350… Mike Stupalov <mike(a)observium.org> wrote .. > Hi, > > seems as too old firmware with HC counters issue: > > ports detected as 64bit, because have ifHCInOctets/ifHCOutOctets oids, > but not have any 64bit counters for Pkts (which should be): > ifHCInUcastPkts/ifHCOutUcastPkts, > ifHCInBroadcastPkts/ifHCOutBroadcastPkts, > ifHCInMulticastPkts/ifHCOutMulticastPkts > > currently no ways for use 64bit counters for octets, but 32bit for pkts.. > > Update firmware on your devices.. > > On 30.01.17 18:40, hansb(a)bennesen.co.uk wrote: > > Thanks Mike, > > > > Debug log from polling Dell switch > > > > Regards Hans > > > > > > > > Mike Stupalov <mike(a)observium.org> wrote .. > >> Hi, > >> > >> please show/attach debug poller output for such device: > >> > >> ./poller.php -d -m ports -h <device> > >> > >> On 30.01.17 17:18, hansb(a)bennesen.co.uk wrote: > >>> Hi All > >>> > >>> I am testing Observium, but I am having a problem with different models of > Dell > >> PowerConnect switches. > >>> The counters like Unicast / Non Unicast packets does not seem to update correctly, > >> but work fine on Netgear and Cisco switches. > >>> When debugging I can see that snmp poll picks up the data > >>> ifInMulticastPkts.1 = 820013 > >>> ifInMulticastPkts.2 = 689375 > >>> ifInMulticastPkts.3 = 0 > >>> ifInMulticastPkts.4 = 0 > >>> ifInMulticastPkts.5 = 0 > >>> > >>> Then in the SQL UPDATE command the counters are either 0 or empty - any ideas? > >>> > >>> SQL UPDATE `ports` set `poll_time` ='1485773865',`poll_period` ='149',`ifInOctets` > >> ='14157050456',`ifInOctets_rate` ='2900.8255033557',`ifOutOctets` ='74622251693',`ifOutOctets_rate` > >> ='12147.88590604',`ifInErrors` ='1',`ifInErrors_rate` ='0',`ifInErrors_delta` > ='0',`ifOutErrors` > >> ='0',`ifOutErrors_rate` ='0',`ifOutErrors_delta` ='0',`ifInUcastPkts` ='',`ifInUcastPkts_rate` > >> ='0',`ifOutUcastPkts` ='',`ifOutUcastPkts_rate` ='0',`ifInNUcastPkts` ='0',`ifInNUcastPkts_rate` > >> ='0',`ifOutNUcastPkts` ='0',`ifOutNUcastPkts_rate` ='0',`ifInBroadcastPkts` > ='',`ifInBroadcastPkts_rate` > >> ='0',`ifOutBroadcastPkts` ='',`ifOutBroadcastPkts_rate` ='0',`ifInMulticastPkts` > >> ='',`ifInMulticastPkts_rate` ='0',`ifOutMulticastPkts` ='',`ifOutMulticastPkts_rate` > >> ='0',`ifInDiscards` ='0',`ifInDiscards_rate` ='0',`ifOutDiscards` ='0',`ifOutDiscards_rate` > >> ='0',`ifInOctets_perc` ='0',`ifOutOctets_perc` ='0',`ifOctets_rate` ='15048.711409396',`ifUcastPkts_rate` > >> ='0',`ifErrors_rate` ='0' WHERE `port_id`! > >>> = '175' > >>> > >>> In the database table field port_mcbc = 1 > >>> > >>> > >>> Kind regards > >>> Hans > >>> > >>> > >>> _______________________________________________ > >>> observium mailing list > >>> observium(a)observium.org > >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >> > >> > >> -- > >> Mike Stupalov > >> http://observium.org > >> > >> > >> _______________________________________________ > >> observium mailing list > >> observium(a)observium.org > >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > > -- > Mike Stupalov > http://observium.org

1 0

Graph aggregation on Observium guideline
by Sophanith Chhom 01 Feb '17

01 Feb '17

Hi All, Since I am new to Observium and I'm not quite sure if we can do like a graph aggregation like Cacti does on Group feature in Observium? Just like on Cacti, we can do a graph aggregation on different nodes/hosts and I try to look around on Group features on Observium and still not found the way yet. If it is possible, can anyone share me the guideline pls? Thanks so much for your help.

1 1