- observium - lists.observium.org

Alert question for Cisco Nexus FEX PSU
by Laszlo Nemeth 23 Jan '17

23 Jan '17

Hello Last night one of our Cisco Nexus FEX's PS went down and i realized that we don't have alarm to check the status of the FEX's PS. I would like to write one. I found a graph about this fault PS. Normally the value 2 but after that is went to fault state the value is 4. I attached the picture. So the question is in this case what is Entity Match that i have to use? I tried this but it doesn't work: sensor_value equal 4 hostname match *sw* sensor_class equals PowerOperType The "PowerOverType" came from the attached picture RRD name (it was just a try :) Or what is the normal way to find the sensor name for the alert? Thanks BR Laszlo

3 4

MIB Sensorgateway
by chott＠praha1.net 23 Jan '17

23 Jan '17

Hello team we have lot of device LAN Controllertr http://www.tinycontrol.pl/tinycontrol/en/lan/lan_kontroler.php in this case there is old MIB https://github.com/pgmillon/observium/blob/master/mibs/SENSORGATEWAY-MIB.mib Probably coresponding with OIDs down, is it possible add support for this LAN Controller? Tom #define SYS_DESCR (99) // iso.3.6.1.2.1.1.1.0: READONLY ASCII_STRING. #define SYS_UP_TIME (97) // iso.3.6.1.2.1.1.3.0: READONLY TIME_TICKS. #define SYS_NAME (98) // iso.3.6.1.2.1.1.4.0: READWRITE ASCII_STRING. #define TRAP_RECEIVER_ID (1) // iso.3.6.1.4.1.17095.2.1.1.1.0: READWRITE BYTE. #define TRAP_RECEIVER_ENABLED (2) // iso.3.6.1.4.1.17095.2.1.1.2.0: READWRITE BYTE. #define TRAP_RECEIVER_IP (3) // iso.3.6.1.4.1.17095.2.1.1.3.0: READWRITE IP_ADDRESS. #define TRAP_COMMUNITY (4) // iso.3.6.1.4.1.17095.2.1.1.4.0: READWRITE ASCII_STRING. #define OUT0 (5) // iso.3.6.1.4.1.17095.3.1.0: READWRITE BYTE. #define OUT1 (6) // iso.3.6.1.4.1.17095.3.2.0: READWRITE BYTE. #define OUT2 (7) // iso.3.6.1.4.1.17095.3.3.0: READWRITE BYTE. #define OUT3 (8) // iso.3.6.1.4.1.17095.3.4.0: READWRITE BYTE. #define OUT4 (9) // iso.3.6.1.4.1.17095.3.5.0: READWRITE BYTE. #define ALL (90) // iso.3.6.1.4.1.17095.3.100.0: READONLY OCTET_STRING. #define TEMP (10) // iso.3.6.1.4.1.17095.4.1.0: READONLY ASCII_STRING. #define VCC (11) // iso.3.6.1.4.1.17095.4.2.0: READONLY ASCII_STRING. #define INP1 (12) // iso.3.6.1.4.1.17095.4.3.0: READONLY ASCII_STRING. #define INP2 (13) // iso.3.6.1.4.1.17095.4.4.0: READONLY ASCII_STRING. #define INP3 (14) // iso.3.6.1.4.1.17095.4.5.0: READONLY ASCII_STRING. #define INP4 (15) // iso.3.6.1.4.1.17095.4.6.0: READONLY ASCII_STRING. #define INP5 (16) // iso.3.6.1.4.1.17095.4.7.0: READONLY ASCII_STRING. #define INP6 (17) // iso.3.6.1.4.1.17095.5.1.0: READONLY ASCII_STRING. #define INP7 (18) // iso.3.6.1.4.1.17095.5.2.0: READONLY ASCII_STRING. #define INP8 (19) // iso.3.6.1.4.1.17095.5.3.0: READONLY ASCII_STRING. #define INP9 (20) // iso.3.6.1.4.1.17095.5.4.0: READONLY ASCII_STRING. #define INP10 (21) // iso.3.6.1.4.1.17095.5.5.0: READONLY ASCII_STRING. #define INP11 (22) // iso.3.6.1.4.1.17095.5.6.0: READONLY ASCII_STRING. #define DTH22_1 (23) // iso.3.6.1.4.1.17095.6.1.0: READONLY ASCII_STRING. #define DTH22_2 (24) // iso.3.6.1.4.1.17095.6.2.0: READONLY ASCII_STRING. #define I3XI5 (30) // iso.3.6.1.4.1.17095.7.1.0: READONLY ASCII_STRING. #define PXT (31) // iso.3.6.1.4.1.17095.7.2.0: READONLY ASCII_STRING. #define PINP4D (32) // iso.3.6.1.4.1.17095.7.3.0: READONLY ASCII_STRING. #define PINP4D_24H (33) // iso.3.6.1.4.1.17095.7.4.0: READONLY ASCII_STRING. #d e fin e I N P1D (41) // is o. 3. 6 .1.4.1.170 95.10.1. 0 : R E AD O N LY BY T E . #define INP2D (42) // iso.3.6.1.4.1.17095.10.2.0: READONLY BYTE. #define INP3D (43) // iso.3.6.1.4.1.17095.10.3.0: READONLY BYTE. #define INP4D (44) // iso.3.6.1.4.1.17095.10.4.0: READONLY BYTE. NUMBERS OID for SNMP [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 733 123 135 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

5 12

Ports in Down State - Overview Page
by Duncan Mossop 20 Jan '17

20 Jan '17

Afternoon, We have a 4 out of a significant number of ports showing as down (red) on the front page of Observium: [cid:image001.png@01D2732E.4EC10C50] However, if we click on the Down link the resulting query is empty: [cid:image002.png@01D2732E.4EC10C50] Is there any way to regenerate this / fix this? Has anyone seen this before? It would be nice to have a clean front page ☺ Thanks, Duncan Mossop • Operations Manager, SystemHOST Ltd ________________________________ dmossop(a)systemhost.co.uk [cid:image18371a.JPG@3bdf0fcf.4197f903] 01524 737414 systemhost.co.uk<http://www.systemhost.co.uk> [Twitter]<https://twitter.com/systemhost> Follow us on Twitter ________________________________ SystemHOST Ltd Registered office: Dawson House, Matrix Office Park, Buckshaw Village, Chorley, Lancashire, United Kingdom, PR7 7NA Registered in England No.05028996 VAT No. 927386490 This e-mail and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. By opening this email or its attachments, you accept liability for any damage that may be caused to your computer hardware, software or data. ________________________________

2 1

adding Android tablets into observium
by Afzaal Shabbir 20 Jan '17

20 Jan '17

Hi, Is it possible to add android tablets in observium? Thanks, Afzaal System Administrator OBES http://www.obes.co

6 7

Entity Type Reference page Typo
by Sam Jones 20 Jan '17

20 Jan '17

The storage section has a typo where the metric names storage_perc and storage_used are incorrectly placed. https://www.observium.org/docs/entities/#storage *Sam Jones *|| CCNA VoIP Network Engineer || Idaho State University jonesamu(a)isu.edu || (208) 282-4525

1 0

Disable a checker
by Youssef BENGELLOUN - ZAHR 20 Jan '17

20 Jan '17

2 2

Error with poller.php with WMI and Exchange
by Dean Bird 20 Jan '17

20 Jan '17

Hello. We have started using Observium to monitor our environment. Just went to add an exchange server using WMI and received the following error when doing the poller.php call. Some of the info in Observium Updates, some does not. Any help would be appreciated. I am happy to supply any additional information that is required. Command: ./poller.php -h exchange.xxxxxxx.local -m wmi ##### Module Start: wmi ##### WMI Poller: Windows version updated: Server 2012 R2 Datacenter (6.3.9600) Intel(R) Xeon(R) CPU E5-2640 0 @ 2.50GHz Storage WMI: ... Exchange: Active Sync; Auto Discover; OWA; Transport Queues; SMTP; PHP Fatal error: Uncaught Error: Call to undefined function discover_app() in /opt/observium/includes/polling/applications/exchange.inc.php:182 Stack trace: #0 /opt/observium/includes/polling/wmi.inc.php(103): include() #1 /opt/observium/includes/polling/functions.inc.php(679): include('/opt/observium/...') #2 /opt/observium/poller.php(172): poll_device(Array, Array) #3 {main} thrown in /opt/observium/includes/polling/applications/exchange.inc.php on line 182 Thanks in advance Dean

1 0

Alert Checker Advice
by Mahurin, Randy 19 Jan '17

19 Jan '17

Hello, I am struggling to get a couple of alert checkers built and am hoping someone can point me in the correct direction regarding my syntax. In the first one, I'd like to alert whenever a processor rises above 45% which is working great, however, I'd like to exclude loadbalancer devices from the check. Attached is a screenshot of my alert check, when I look at alert logging, I see that loadbalancers are still being checked. I've tried "type notequals loadbalancer" as part of the test with the same results. The second alert I'm struggling with is a battery alert based on a status alert with a status of "batteryNeedsReplacing" preferably only looking at device type equals power. I've attached my attempt at that alert as well. I've been through the documentation, but still can't seem to get my syntax correct. I appreciate any advice anyone can give. Currently running 0.16.12.8292 stable. Thank you Randy Mahurin Idaho Power | Information Technology Work (208) 388-2663 Email rmahurin(a)idahopower.com<mailto:rmahurin@idahopower.com> --------------------------------------------------------------------- This transmission may contain information that is privileged, confidential and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the information contained herein (including any reliance thereon) is STRICTLY PROHIBITED. If you received this transmission in error, please immediately contact the sender and destroy the material in its entirety, whether in electronic or hard copy format. Thank you. ---------------------------------------------------------------------

2 2

hostname shortening bug
by Sebastian Klute 19 Jan '17

19 Jan '17

Dear Team, we have noticed since a couple of days that some switches are shorten in the name. In detail: At the overview page under the section 'Status Warnings and Notifications' we got several switches shorten in name. For example the name is 'fra4.b.j1-switch1.acc' and in the given section it is shorten to 'fra4.a' and thats it. This behaviour is not occuring at other switches. Only at about 20% of our infrastructure this strange shortening appears. Fully random, no particularly order or chronological order to notice. I cannot get an idea why this is happening. The switches are added through hostnames as usual. First I thought this is caused by the dots in the name that they are somehow noticed as a kind of DNS suffix and that the names are shorten by this. But at other switches named by the same scheme this is not the case. Do you got an Idea why this is happening or what we can do against it? Kind regards, Sebastian

2 1

Unwanted Alert Send to Email
by Idzma Zakaria 19 Jan '17

19 Jan '17

Hi All, I have configured only for down and traffic alert to be send via email notification but at the same time unwanted alert Mempool was sended to the email as well. How I want to disable Mempool Alert so that it wont send an email notification. Is this the right way? $config['alerts']['mempool']['blacklist'] = TRUE; -- Kind regards, Idzma Zakaria, ICT Senior Executive ---------------------------------------------------------------------------------------------------------- Australian International School Malaysia (AISM) No.22 Jalan Anggerik, The Mines Resort City, 43300 Seri Kembangan, Selangor, Malaysia. *T:* +60 3 8949 5000 *F*: +60 3 8949 5100 *E*: idzmaz(a)aism.edu.my *W*: http://www.aism.edu.my/ *Direct Line*: ---------------------------------------------------------------------------------------------------------- <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <https://www.facebook.com/aismalaysia> <http://www.youtube.com/user/AISMvideos> <http://www.youtube.com/user/AISMvideos> <http://www.youtube.com/user/AISMvideos> <http://www.youtube.com/user/AISMvideos> <http://www.youtube.com/user/AISMvideos> <http://www.youtube.com/user/AISMvideos> <https://twitter.com/AISMalaysia/> <https://twitter.com/AISMalaysia/> <https://twitter.com/AISMalaysia/> <https://twitter.com/AISMalaysia/> <https://twitter.com/AISMalaysia/> <https://twitter.com/AISMalaysia/> <http://www.aism.edu.my/virtualtour> <http://www.aism.edu.my/virtualtour> <http://www.aism.edu.my/virtualtour> <http://www.aism.edu.my/virtualtour> <http://www.aism.edu.my/virtualtour> <http://www.aism.edu.my/virtualtour> -- *Confidentiality Disclaimer:* This e-mail and any attachments are confidential and intended solely for the intended addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the intended addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose, distribute or otherwise act in reliance upon any part of this e-mail or its attachments. Australian International School Malaysia and all affiliates under Taylor's Education Group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any internet communications by any third party in reliance to this email, or from the transmission of any viruses. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Australian International School Malaysia and all affiliates under Taylor's Education Group. Replies to this e-mail may be monitored by Australian International School Malaysia and all affiliates under Taylor's Education Group for operational or business reasons.

2 2