- observium - lists.observium.org

Display used VLAN's in the complete environment
by Jan Kuiper 25 Mar '16

25 Mar '16

Hello, Is it possible to create an view of the used vlan's in the complete environment? Now we can only see the vlan's configured on the different devices? If it is possible I like to see the vlan's to the different devices where it is used on and perhaps we can use a hyperlink to that device. VLan 1 "Name" --> Switch-01 --> Switch-02 Vlan 2 "Name 2" --> Switch-02 .... Met vriendelijke groet / Kind Regards, Jan Kuiper [cid:image001.jpg@01CF62F0.6DBAB760] Piramide ICT Services | Kollergang 9 | 7773 NG Hardenberg | Postbus 220 | 7770 AE Hardenberg info(a)piramide.nl<mailto:info@piramide.nl> | http://www.piramide.nl | +31 (0)523 261 387 Disclaimer Deze e-mail is uitsluitend bestemd voor de geadresseerde(n). Verstrekking aan en gebruik door anderen is niet toegestaan. Piramide sluit iedere aansprakelijkheid uit die voortvloeit uit elektronische verzending.

1 0

Stageing and live area
by Danny op de Dijk 25 Mar '16

25 Mar '16

Quick question to people who may know this bit of information regarding the license. We have as company an official version of Observium. We would like to know how many time we can install the software with that key. The reason is we would like to have a operational live situation and a testing area for new devices codes etc.... Is this possible or is it needed to buy two licenses. Thanks again for anyone that can answer this question. Kind regards, [B4ict_Logo_Only]Danny op de Dijk | B4ICT W: www.b4ict.nl<http://www.b4ict.nl> @: helpdesk(a)b4ict.nl<mailto:helpdesk@b4ict.nl> T: 035-678 06 65 Remote support (Windows)<http://www.b4ict.nl/downloads/teamviewer_windows.exe> Remote support (Mac)<http://www.b4ict.nl/downloads/teamviewer_mac.zip>

2 2

Custom MIBs
by Tibor Marchyn 25 Mar '16

25 Mar '16

Hi, We are using Sophos UTM (Astaro) appliance, but it's currently not supported by Observium by default. What is correct process to request adding support for additional MIBs? I didn't find simple answer if it's possible somehow just add MIB file to observium without developing. Thanks

1 0

Problem with RRD spikes
by Danny op de Dijk 25 Mar '16

25 Mar '16

Dear readers, As of a couple of months now we are the happy users of Observium. And after a lot of tweaking and tunning we have a great tool monitoring our network and all of its devices. Still there are some issues we still can't work out or find any information about on the net. I'll describe as best as I can wat I want to fix. On the Observium site there is a section called Miscellaneous with a need trick to irradicate those RDD spikes. The code to use on the command line is as follow: for i in rrd/*/*.rrd; do scripts/removespikes.pl $i; done; And when I execute this code on de command line of Observium (Via Putty) I'm only getting an error message saying: -bash: scripts/removespikes.pl: Permission denied And this message a couple of times over and over again. After a short whil it stopes and nothing has been done to the spikes on the tables of Observium. So natuarly my question is what am I doing wrong, or better what file or folder hasn't got the right rights for me to execute this command. It would be very helpful if these kind of information or any kind of information was availible on the Observium website, but it isn't. And I'm very doudfull it will ever happen. So if anyone has somekind of solution it would be very helpfull. Kind regards, [B4ict_Logo_Only]Danny op de Dijk | B4ICT W: www.b4ict.nl<http://www.b4ict.nl> @: helpdesk(a)b4ict.nl<mailto:helpdesk@b4ict.nl> T: 035-678 06 65 Remote support (Windows)<http://www.b4ict.nl/downloads/teamviewer_windows.exe> Remote support (Mac)<http://www.b4ict.nl/downloads/teamviewer_mac.zip>

2 2

Nested location menu without geocodes
by Wiethoff, Helge 25 Mar '16

25 Mar '16

Hi all, is it possible to make the location menu nested without using geocodes? Approximateley like the geocodes are managed... For example: Switch A: snmp location "Building 1, Floor 2, Room 23" Switch B: snmp location "Building 1, Floor 2, Room 23" Switch C: snmp location "Building 1, Floor 1, Room 42" Locations ------- Building 1 -> Floor 1 -> Room 42 (2 devices) -> Floor 2 -> Room 23 (1 device) Building X ... Maybe this is already possible but i am not able to configure it right :-) Otherwise this would be a nice feature when many devices are placed in the same building but in different floors/rooms. cheers, Helge PS: using Observium Professional 0.16.3.7659

3 7

Installed Observium 0.16.1.7533 Custom-Default in Config not working?
by Dano, Leo 24 Mar '16

24 Mar '16

Hello all, I have two installs and one works fine but the other that installed the exact same way shows the Custom and Defualt settings in Global Settings at the same time. You cannot click on them to change from Default to Custom. I installed the same exact way this week, but the one I installed last week works fine. Any thoughts? Thanks, ----------------------- Leo Dano

3 14

Re: [Observium] QUALCOMM spoof attempt detected: Re: Installed Observium 0.16.1.7533 Custom-Default in Config not working?
by Dano, Leo 24 Mar '16

24 Mar '16

please allow Thanks, ----------------------- Leo Dano IT Engineer Associate Engineering Compute Business Unit Qualcomm Inc. 858-845-2610 -----Original Message----- From: request.allow.spoof(a)qualcomm.com [mailto:request.allow.spoof@qualcomm.com] Sent: Thursday, March 24, 2016 9:08 AM To: Observium Network Observation System <observium(a)observium.org> Subject: QUALCOMM spoof attempt detected: Re: [Observium] Installed Observium 0.16.1.7533 Custom-Default in Config not working? PLEASE RESEND THE INFORMATION USING A PERSONAL EMAIL ADDRESS. -------------------------------------------------------------------------------------- An email has been sent to you from outside of Qualcomm, but the “From” address has been changed (i.e., spoofed) to make it look like it originated from inside Qualcomm. Since this can indicate a phishing attack the email has been quarantined to protect you. “Spoofing” can also occur when you use your Qualcomm email address on external websites to send yourself, friends, and colleagues articles, directions, reservations, etc. If you do not recognize the email or the email sender, there is no action required by you. The quarantined email will be deleted. If the quarantined email is business related, simply reply to this email with a justification for its release. To learn more about spoofing and why this email may have been labeled a spoofed email, please visit http://qwiki.qualcomm.com/it/QCSpoof. Quarantine: https://quarantine.qualcomm.com Remote Host: omega.memetic.org Server IP: 37.59.0.47 Envelope Sender: observium-bounces(a)observium.org From: "Dano, Leo" <ldano(a)qualcomm.com> To: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] Installed Observium 0.16.1.7533 Custom-Default in Config not working?

1 0

Re: [Observium] QUALCOMM spoof attempt detected: Re: Installed Observium 0.16.1.7533 Custom-Default in Config not working?
by Dano, Leo 24 Mar '16

24 Mar '16

please allow Thanks, ----------------------- Leo Dano IT Engineer Associate Engineering Compute Business Unit Qualcomm Inc. 858-845-2610 -----Original Message----- From: request.allow.spoof(a)qualcomm.com [mailto:request.allow.spoof@qualcomm.com] Sent: Thursday, March 24, 2016 9:02 AM To: Observium Network Observation System <observium(a)observium.org> Subject: QUALCOMM spoof attempt detected: Re: [Observium] Installed Observium 0.16.1.7533 Custom-Default in Config not working? PLEASE RESEND THE INFORMATION USING A PERSONAL EMAIL ADDRESS. -------------------------------------------------------------------------------------- An email has been sent to you from outside of Qualcomm, but the “From” address has been changed (i.e., spoofed) to make it look like it originated from inside Qualcomm. Since this can indicate a phishing attack the email has been quarantined to protect you. “Spoofing” can also occur when you use your Qualcomm email address on external websites to send yourself, friends, and colleagues articles, directions, reservations, etc. If you do not recognize the email or the email sender, there is no action required by you. The quarantined email will be deleted. If the quarantined email is business related, simply reply to this email with a justification for its release. To learn more about spoofing and why this email may have been labeled a spoofed email, please visit http://qwiki.qualcomm.com/it/QCSpoof. Quarantine: https://quarantine.qualcomm.com Remote Host: omega.memetic.org Server IP: 37.59.0.47 Envelope Sender: observium-bounces(a)observium.org From: "Dano, Leo" <ldano(a)qualcomm.com> To: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] Installed Observium 0.16.1.7533 Custom-Default in Config not working?

1 0

Re: [Observium] QUALCOMM spoof attempt detected: Installed Observium 0.16.1.7533 Custom-Default in Config not working?
by Dano, Leo 24 Mar '16

24 Mar '16

Can you please allow this external email address permanently? This is business related as we are demo'ing the Observium Tool. Thanks, ----------------------- Leo Dano IT Engineer Associate Engineering Compute Business Unit Qualcomm Inc. 858-845-2610 -----Original Message----- From: request.allow.spoof(a)qualcomm.com [mailto:request.allow.spoof@qualcomm.com] Sent: Thursday, March 24, 2016 8:37 AM To: observium(a)observium.org Subject: QUALCOMM spoof attempt detected: [Observium] Installed Observium 0.16.1.7533 Custom-Default in Config not working? PLEASE RESEND THE INFORMATION USING A PERSONAL EMAIL ADDRESS. -------------------------------------------------------------------------------------- An email has been sent to you from outside of Qualcomm, but the “From” address has been changed (i.e., spoofed) to make it look like it originated from inside Qualcomm. Since this can indicate a phishing attack the email has been quarantined to protect you. “Spoofing” can also occur when you use your Qualcomm email address on external websites to send yourself, friends, and colleagues articles, directions, reservations, etc. If you do not recognize the email or the email sender, there is no action required by you. The quarantined email will be deleted. If the quarantined email is business related, simply reply to this email with a justification for its release. To learn more about spoofing and why this email may have been labeled a spoofed email, please visit http://qwiki.qualcomm.com/it/QCSpoof. Quarantine: https://quarantine.qualcomm.com Remote Host: omega.memetic.org Server IP: 37.59.0.47 Envelope Sender: observium-bounces(a)observium.org From: "Dano, Leo" <ldano(a)qualcomm.com> To: "observium(a)observium.org" <observium(a)observium.org> Subject: [Observium] Installed Observium 0.16.1.7533 Custom-Default in Config not working?

1 0

(no subject)
by Serghei Golipad 24 Mar '16

24 Mar '16

Guys, My status_summary is showing 38 ports down however when I navigate to the page it only shows 6, it has been stuck like this for a while. I’ve tried rebooting observium host. Cheers PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. Kelway (UK) Ltd is a Company registered in England and Wales. This email is sent for and on behalf of Kelway Holdings Limited. Kelway Holdings Limited is the UK holding company for Kelway (UK) Limited trading as Kelway. The registered office for Kelway Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than Kelway or the sender of its existence. For more information about Kelway please visit www.kelway.co.uk

1 0

'Arch -> Extension' repeating in Eventlog
by Robert Williams 23 Mar '16

23 Mar '16

Hi, Got a weird issue with one device, it's running Ubuntu 14.04.1 / 3.19.0-56 and is continuously reporting a change of Architecture (to an invalid name) on every poll. Event log for the device below: The device details show this (although without an 'n'): I have no idea what could be so unique about this device, we have plenty of systems running this OS/version and no others reporting this issue. It's a pretty basic build, environmental monitoring box. It appears to be being written by the Unix-Agent module, but I'm not clear why. I've attached the debug of the agent module which shows it setting the Arch, but, I don't understand where it gets it from in the first place? Any ideas most welcome - Cheers! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

4 8

Port Description or Change Port Name And Mailing list Archive
by Hostmaster＠offpla.net 23 Mar '16

23 Mar '16

Hello 2 questions, 1st the link on the site to the mailing list archive produces a 404, is there an updated link to review the archive available? 2nd Does a way exist to change the given port name, or to add a description to a port? We have many switches we monitor and it would be very helpful to add a description or change extend a name of a port, so we could instantly know , this port is related to workstation A101 or server B101, or Access point8, and so on. Yes we have other means of accomplishing this, however it's not the instant recognition this would provide. Thanks Pete LaForge Hostmaster(a)offpla.net Logic is only the beginning of Wisdom.

1 0

Nexus FEX power, fan and current datas?
by Laszlo Nemeth 23 Mar '16

23 Mar '16

Hello We are monitoring some Nexus 5K with FEX and some Cisco ASR 9000. We get lot of datas from ASR (power, fan speed etc etc) but not from the Nexus FEX modules. The FEX (and Nexus 5K) reports only just the temperature in the latest CE. Of course i get every enviromnent datas in CLI from the switch. Now we faced with a PSU faliure in a FEX, but i am not able to create a check becase no datas about it. In the near future can we get more datas from Nexus and FEX datas too? Thanks Laszlo

1 0

Observium Reports (Availability & Network Usage)
by Dananjaya Ekanayake 23 Mar '16

23 Mar '16

Hi, With the "Professional" version, can we generate reports similar to Solarwinds ? Best Regards, Dananjaya Ekanayake -----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of jayashree(a)fcoos.net Sent: Wednesday, March 23, 2016 12:13 PM To: observium(a)observium.org; observium(a)observium.org Cc: Sandeep Ahtiyarath <sandeep(a)fcoos.net>; Arun Kumar <arun(a)fcoos.net> Subject: [Observium] Fwd: Can we get multiple logins in observium Hello, We need information on adding multiple host groups in single login, basically our requirement is to provide separate login to their own host group so that they would be able to view only their host machines. If the above requirement of ours is available in the paid version we would like to subscribe for it. Please provide the details and don't remove CC list in mail. Thanks & Regards, Jayashree.N FCOOS Technologies Ph:080 2539090 _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium This e-mail transmission (inclusive of any attachments) is strictly confidential and intended solely for the ordinary user of the e-mail address to which it was addressed. It may contain legally privileged and/or CONFIDENTIAL information. The unauthorized use, disclosure, distribution printing and/or copying of this e-mail or any information it contains is prohibited and could, in certain circumstances, constitute an offence.

1 0

Fwd: Can we get multiple logins in observium
by jayashree＠fcoos.net 23 Mar '16

23 Mar '16

Hello, We need information on adding multiple host groups in single login, basically our requirement is to provide separate login to their own host group so that they would be able to view only their host machines. If the above requirement of ours is available in the paid version we would like to subscribe for it. Please provide the details and don't remove CC list in mail. Thanks & Regards, Jayashree.N FCOOS Technologies Ph:080 2539090

1 0

Blank page after messing with php
by Jason Vanlandingham 23 Mar '16

23 Mar '16

I have a small install on CentOS 6. I saw the message in the web interface about the php version, so I tried updating it from 5.3.3 to 5.6. I got a blank page after that. I found the tip about editing php.ini to set memory_limit = 1024M but that didn't work. I removed 5.6 and went back to 5.3.3 and made the php.ini edit again, but no luck. (Full system restart after each change) What should I look at before I decide this is the excuse I need to wipe the whole thing and go to CentOS 7?

2 4

Trial Subscription?
by Dano, Leo 22 Mar '16

22 Mar '16

Good morning everyone, We are using the "Community" version. I was wondering if there was a "trial" version of the "Subscription" version to try out the advanced features? Thanks, ----------------------- Leo Dano

3 3

Re: [Observium] QUALCOMM spoof attempt detected: Trial Subscription?
by Dano, Leo 22 Mar '16

22 Mar '16

Please allow this email as this is business related as we are trying out this management application (Observium). Thanks, ----------------------- Leo Dano IT Engineer Associate Engineering Compute Business Unit Qualcomm Inc. 858-845-2610 -----Original Message----- From: request.allow.spoof(a)qualcomm.com [mailto:request.allow.spoof@qualcomm.com] Sent: Tuesday, March 22, 2016 8:14 AM To: observium(a)observium.org Subject: QUALCOMM spoof attempt detected: [Observium] Trial Subscription? PLEASE RESEND THE INFORMATION USING A PERSONAL EMAIL ADDRESS. -------------------------------------------------------------------------------------- An email has been sent to you from outside of Qualcomm, but the “From” address has been changed (i.e., spoofed) to make it look like it originated from inside Qualcomm. Since this can indicate a phishing attack the email has been quarantined to protect you. “Spoofing” can also occur when you use your Qualcomm email address on external websites to send yourself, friends, and colleagues articles, directions, reservations, etc. If you do not recognize the email or the email sender, there is no action required by you. The quarantined email will be deleted. If the quarantined email is business related, simply reply to this email with a justification for its release. To learn more about spoofing and why this email may have been labeled a spoofed email, please visit http://qwiki.qualcomm.com/it/QCSpoof. Quarantine: https://quarantine.qualcomm.com Remote Host: omega.memetic.org Server IP: 37.59.0.47 Envelope Sender: observium-bounces(a)observium.org From: "Dano, Leo" <ldano(a)qualcomm.com> To: "observium(a)observium.org" <observium(a)observium.org> Subject: [Observium] Trial Subscription?

1 0

Add New alert for packet/sec
by Sathish.I 22 Mar '16

22 Mar '16

Hello, I want to create an alert checker for packet/sec, can you please let me know How can I create. I have a created template but I hopes it is not gives me any logs. ifInUcastPkts_rate ge 100 ifOutUcastPkts_rate ge 100 Regards, sathi

1 0

Modify reported Custom OID Values?
by Gumilar Siegfried 21 Mar '16

21 Mar '16

Hello, I am pretty new to Observium and really love it. Right now I am adding some Custom OIDs from our devices. We are using these devices to log the power usage of our housing customers: http://www.hw-group.com/products/HWg-PWR/hwg-pwr25_M-bus_gateway_en.html There is a small problem with the reported power usage. The device reports the values a hundred times higher than they are supposed to be, e.g. 100 kWh when in fact it should be 1 kWh. Is there a way I can divide the polled values before they are stored? If not could you please add such a feature? I was able to do this in WhatsUp Gold, but I want to get rid of it :) Thanks in advance. Regards, Siegfried

2 2

Customers and filter
by chott＠praha1.net 21 Mar '16

21 Mar '16

Hello team, Are you plaining "filter" into Customer/Transit/Peering section? Tom

2 1

Stable RSS Feed
by Thomas Nicholson 19 Mar '16

19 Mar '16

Hi All, Is there an RSS feed for when the Stable train gets updated? The current stable is r7629, and the RSS feed (/svn.rss) only shows r7628 then r7630. Cheers, Tom

4 4

Download RAW data for 95th billing
by ChanTy 19 Mar '16

19 Mar '16

Hi, Is it possible to download raw data for 95th billing purpose ? To my understand, we can only do fixed billing period like 30 or 31 but some month is 30, 31, 29 or 28 billing period. If downloading as raw data, it is much flexible to compare with customer or vender. Regards, chanty

2 2

Re: [Observium] Extra Pages - Can they be added?
by Gumilar Siegfried 18 Mar '16

18 Mar '16

Hi Tom, we would like to have this feature as well. It is the only thing that prevents me from shutting down our Cacti Setup. ☺ Regards, Siegfried Von: observium [mailto:observium-bounces@observium.org] Im Auftrag von Tom Laermans Gesendet: Donnerstag, 17. März 2016 17:55 An: Observium Network Observation System Betreff: Re: [Observium] Extra Pages - Can they be added? Hi Lee, Currently not possible without copying and modifying some code, we'd like to support multiple customizable front pages at some point though.. Tom On 03/17/2016 02:38 PM, Lee Byatt wrote: Hi, Is it possible to create a new page so I can have extra interface summaries on it? For example my front page is set-up like this; // Front Page $config['frontpage']['order'] = array('status_summary','device_status','map','custom_traffic','overall_traffic','alert_table','eventlog'); $config['frontpage']['custom_traffic']['ids'] = "3577,3044,2964,3559"; $config['frontpage']['custom_traffic']['title'] = "xxxx Aggregated Transit & iXP Traffic"; How to I use another page with another custom traffic, is this possible? Many regards _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

4 3

Extra Pages - Can they be added?
by Lee Byatt 17 Mar '16

17 Mar '16

Hi, Is it possible to create a new page so I can have extra interface summaries on it? For example my front page is set-up like this; // Front Page $config['frontpage']['order'] = array('status_summary','device_status','map','custom_traffic','overall_traffic','alert_table','eventlog'); $config['frontpage']['custom_traffic']['ids'] = "3577,3044,2964,3559"; $config['frontpage']['custom_traffic']['title'] = "xxxx Aggregated Transit & iXP Traffic"; How to I use another page with another custom traffic, is this possible? Many regards

2 1

SMS alert recommendation
by Alex Winder ＠ M5i 17 Mar '16

17 Mar '16

Hi all, We're looking to set-up SMS alerts on our Observium install, what do people recommend is a good system to use for this? Kind regards, Alex.

5 6

Alcatel OmniStack 6224 --> Aruba device - ArubaOS
by Ivan Biasi 17 Mar '16

17 Mar '16

Hi Adam and all I'm trying Observium in a test environment, using some different network devices, and I found the following issue. The Alcatel OmniStack 6224 switch is reported by Observium as an Aruba device running ArubaOS. Selecting it on the GUI, the following banner appears: "Device not yet discovered This device has not yet been successfully discovered. System information and statistics will not be populated and graphs will not draw. This device should be automatically discovered within 10 minutes." ...but devices was added some days ago. Here enclosed a picture to better understand the problem. Is the Alcatel 6224 switch unsupported/partially supported, or there are some configuration issues to identify and solve? Thanks a lot, regards Ivan. -- ing. Biasi Ivan Area Ingegneria di Rete Direzione Servizi e Reti TRENTINO NETWORK S.R.L. Via G.Pedrotti, 18 – 38121 - TRENTO Tel : (+39) 0461.020222 Fax : (+39) 0461.020201 Email: ivan.biasi(a)trentinonetwork.it ________________________________________________________________________________ Società soggetta a direzione e controllo da parte della Provincia Autonoma di Trento. REG. IMP. C.F. e P. IVA 01904880224 ________________________________________________________________________________ CONFIDENZIALE: Questo messaggio e gli eventuali allegati sono confidenziali e riservati. Se vi è stato recapitato per errore e non siete fra i destinatari elencati, siete pregati di darne immediatamente avviso al mittente. Le informazioni contenute non devono essere mostrate ad altri, nè utilizzate, memorizzate o copiate in qualsiasi forma. CONFIDENTIAL: This e-mail and any attachments to it may be confidential and may contain private and confidential information. If you are not the intended recipient of this email please notify the sender immediately. Moreover, you must not disclose or distribute its contents to anyone nor copy, store or use its contents in any way.

3 7

New Admin User creation
by Sathish.I 17 Mar '16

17 Mar '16

Hello All, I lost my admin user password, and I have created new user as below with level10. But when I logged into GUI with observium user id and password I am not able to login. Error is Wrong username and password. Can you please help me. ~# ~# ~# cd /opt/observium/ /opt/observium# ./adduser.php observium Password@123 10 Observium 0.16.1.7535 Add User User observium added successfully. /opt/observium# Regards, Sath

3 7

Alerts x contacts
by Eduardo Schoedler 17 Mar '16

17 Mar '16

Hi, I registered a few contacts in Observium Alerts, but it's not using them. Can I specify a different contact for different alerts? Thank you. Regards, -- Eduardo Schoedler

2 2

Not able to add juniper router
by Ankit Dubey 16 Mar '16

16 Mar '16

Hi, Not able to add juniper routers( Juniper MX104 & Juniper ACX1100) to my License version observium . When we are trying to run SNMP walk from OBSERVIUM, Juniper is not giving full result. Best regards Ankit Dubey ________________________________ This E-Mail may contain Confidential and/or legally privileged Information and is meant for the intended recipient(s) only. If you have received this e-mail in error and are not the intended recipient/s, Kindly notify the sender and then delete this e-mail immediately from your system. You are also hereby notified that any use, any form of reproduction, dissemination, copying, disclosure, modification, distribution and/or publication of this e-mail, its contents or its attachment/s other than by its intended recipient/s is strictly prohibited and may be unlawful. Internet Communications cannot be guaranteed to be secure or error-free as information could be delayed, intercepted, corrupted, lost, or contain viruses. Sistema Shyam Teleservices Limited does not accept any liability for any errors, omissions, viruses or computer problems experienced by any recipient as a result of this e-mail.

3 4

Recommendation to support 20K devices on observium
by Ruiz, Carlos 16 Mar '16

16 Mar '16

Good morning everyone, We're evaluating to use observium as hardware monitoring devices based on snmp protocol for devices located all around the world. We're talking about 20K devices and I believe that have one single host locate in SSF, getting all the info from all the devices, located on places like Shangai may not be the best scenario to get the best performance from the tool itself Does observium support the concept of Master of masters?, I mean have local master observium hosts (EMEA, APAC, NA) and consolidate all the info in one single Master Observium Instance If not what will be a recommended approach to cover an scenario like the one described Thanks in advance for your help and collaboration Kind Regards -- Carlos Ruiz Compute System Management Senior Engineer Roche Farma, S.A.Josefa Valcarcel, 40. ES-28027 Madrid (Spain) Phone: +34 91 305 99 25 Mobile: +34 662 10 46 14 * *

4 9

Netapp missing network data
by Louis Bailleul 16 Mar '16

16 Mar '16

Hi, I have a Netapp in cluster mode that I have added to Observium. It only display volume usage but no disk or network usage. Is it because the code expect a mode 7 device ? According to this document http://www.netapp.com/us/media/tr-4220.pdf (Table 27) it should expose some network stuff. I tried the .1.3.6.1.4.1.789.1.22.1 oid and it indeed returns data. I have attached discovery, poller and the snmpwalk of the OID mentioned. Best regards, Louis

1 0

Strange error
by Andrew Colin 16 Mar '16

16 Mar '16

Hi Guys Strange one When a device is down it always shows the downtime as per below Any ideas why it says 1year?

2 1

APC device detected as power instead of environment
by Louis Bailleul 15 Mar '16

15 Mar '16

Hi, I have a few APC AP9340 which are some environmental sensors collector. They are detected quite well but are categorized as Power device instead of Environmental. I have attached debug discovery and poller for one of them. Best regards, Louis

2 2

invalid args passed into function error @ r7676
by Rob VanHooren 15 Mar '16

15 Mar '16

greetings. I’m seeing this when running discovery of a c3750 ipbase v12.2(35)SE5 thoughts? thx. R. ##### Module Start: vlans ##### VLANs: CISCO-VTP-MIB (Domain 1) 1 172 192 666 999 1002 1003 1004 1005 1011 1020 1023 1024 1025 1027 1030 1031 1033 1035 1037 1039 1101 1102 1103 1104 1106 1107 1108 1110 2000 2008 2009 2010 2011 2012 2015 2016 2017 2019 2020 2021 2022 2023 2025 2026 2027 2030 2031 2032 2033 2034 2035 2037 2038 2039 2040 2045 2046 2047 2048 2049 2050 2051 2210 2221 4001 Q-BRIDGE-MIB Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. ERROR: Device does not support per-VLAN community. Module [ vlans ] stats: 1[V+] 172[V+] 192[V+] 666[V+] 999[V+] 1002[V+] 1003[V+] 1004[V+] 1005[V+] 1011[V+] 1020[V+] 1023[V+] 1024[V+] 1025[V+] 1027[V+] 1030[V+] 1031[V+] 1033[V+] 1035[V+] 1037[V+] 1039[V+] 1101[V+] 1102[V+] 1103[V+] 1104[V+] 1106[V+] 1107[V+] 1108[V+] 1110[V+] 2000[V+] 2008[V+] 2009[V+] 2010[V+] 2011[V+] 2012[V+] 2015[V+] 2016[V+] 2017[V+] 2019[V+] 2020[V+] 2021[V+] 2022[V+] 2023[V+] 2025[V+] 2026[V+] 2027[V+] 2030[V+] 2031[V+] 2032[V+] 2033[V+] 2034[V+] 2035[V+] 2037[V+] 2038[V+] 2039[V+] 2040[V+] 2045[V+] 2046[V+] 2047[V+] 2048[V+] 2049[V+] 2050[V+] 2051[V+] 2210[V+] 2221[V+] 4001[V+] o Duration 11.076s

1 0

multi site support?
by Bernd Kammlott | kaneo GmbH - green IT solutions 15 Mar '16

15 Mar '16

hey, currently we are using cacti to collect snmp data but your solutions looks much better :) Currently we are collecting data from all our customers into one centralized system on one of our servers. Would it be possible to have some kind of "multi site" installation with observium to give our customers access to their data? We dont want to setup Observium for each of our customers, but want them to be able to have a look at the current state their systems. I could not find any documentation about this feature, is is possible? Maybe with groups or locations? -- Mit freundlichen Grüßen Bernd Kammlott Systemintegration kaneo GmbH - green IT solutions | Lüner Weg 32a | D-21337 Lüneburg Tel.: +49 4131 22 700 73 | Mobil: +49 170 833 32 67 | E-Mail: bernd.kammlott(a)kaneo-gmbh.de Internet: www.kaneo-gmbh.de | www.facebook.com/kaneo.green.solutions Geschäftsführung: Andreas Kammlott, Nele Lübberstedt | Amtsgericht Lüneburg: HRB 205201 B | USt-ID: DE815486812 | Bitte prüfen Sie der Umwelt zuliebe, ob der Ausdruck dieser E-Mail erforderlich ist.|

5 8

Ethernet Service Instance Interface Names Truncated
by Mailing Lists 15 Mar '16

15 Mar '16

Am I imagining things, or did Observium previously correctly display Ethernet service instance interfaces in the GUI? I've noticed recently that all the interfaces names for service instance interfaces seem to be truncated in a few of the views Picture speaks a thousand words, where these show GigabitEthernet0/16. now, I am sure they previously would have been listed as GigabitEthernet0/16.ServiceInstance.1234 etc; [image: Inline images 1] [image: Inline images 4] Discovery debug example from the device shows the interfaces captured as the full name: ( [ifDescr] => GigabitEthernet0/1.ServiceInstance.206 [ifAlias] => Description [ifName] => Gi0/1.SI.206 [ifType] => l2vlan [ifOperStatus] => up ) If you search in the ports for for the full interface name it knows it as the right thing; [image: Inline images 2] Looks like the GUI just truncates the names? Obviously this makes it harder than it should be to identify the correct interface in the list. Any chance we can have this show the whole thing? :) Thanks, Tim C

6 11

Reporting Devices down when they are up
by Andrew Colin 15 Mar '16

15 Mar '16

Hi Guys I am getting a strange issue Observium is reporting certain devices as down when they are up. I can snmpwalk to them from the server but the gui says they are down Any ideas? Thanks Andrew

2 2

Cisco SG350 as Generic device
by chott＠praha1.net 15 Mar '16

15 Mar '16

Hello, please can you help me with new Cisco SG350XG switches? Snmpwalk attached Observium recognize this Cisco switch as Generic device Tom

2 2

SNMP access via poller issues
by Cameron Murray 15 Mar '16

15 Mar '16

Guys, Overnight we received a lot of alerts for device going offline however these were false positives. We've found that the poller is having issues connecting to some devices. Brocade ICX Switch Cisco 2900 series RouterOS SNMP is working via snmpwalk on the machine running obs and also from other test locations however the poller times out on them. We've reset the configuration for the devices in obs however access still fails. Access appears to come and go. We've confirmed obs is up to date and have rebooted the services. Regards, Cameron Murray Senior Communications Manager How am I doing? Please click here<http://www.techpath.com.au/contact-us/feedback/> to rate my work. [cid:image001.png@01D1739A.5BC99370]<http://www.techpath.com.au/> P 1300 033 300 F 07 3809 3999 E cameron(a)techpath.com.au www.techpath.com.au<http://www.techpath.com.au> Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 [Facebook]<http://www.facebook.com/techpathau> [Twitter]<http://twitter.com/techpathau> [LinkedIn]<http://www.linkedin.com/company/techpathau> Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd.

4 9

Reset password tool on main website
by Gavin Henry 15 Mar '16

15 Mar '16

Hi, Been waiting for a while now with two emails I know to work. Can someone check? Trying to get my subscription username as a renewed one still has the old one and it's just timed out now. Thanks. -- Kind Regards, Gavin Henry. http://www.surevoip.co.uk

4 23

cannot find device
by Jeffrey d'Ambly 14 Mar '16

14 Mar '16

I have a device that I cannot discover or delete, in observium Professional How can I fix this? mysql> select hostname, device_id FROM devices WHERE hostname LIKE 'ams-sw121'; +-----------+-----------+ | hostname | device_id | +-----------+-----------+ | ams-sw121 | 176 | +-----------+-----------+ 1 row in set (0.00 sec) mysql> exit Bye [root@sjc-corp-net01 ~]# /home/observium/discovery.php -h 176 Observium 0.15.5.6406 Discovery Current Revision : 6406 New Revision : 7674 WARNING: 0 devices discovered. Did you specify a device that does not exist? Memory usage: 4.5MB (peak: 4.5MB) MySQL: Cell[21/0.03s] Row[0/0s] Rows[2/0s] Column[0/0s] Update[0/0s] Insert[0/0s] Delete[0/0s] [root@sjc-corp-net01 ~]# [root@sjc-corp-net01 ~]# /home/observium/delete_device.php -h 176 Observium 0.15.5.6406 Remove Device Device -h doesn't exist! [root@sjc-corp-net01 ~]#

3 5

Is there a way to reset all interface errors
by Ron Culler 14 Mar '16

14 Mar '16

Looking to see if there is an easy way to reset all the interface errors across a device or devices? I'm trying to zero them out for a baseline Ron

1 0

Housekeeping - invalid RRD files
by Sean Pedersen 14 Mar '16

14 Mar '16

The instructions for the housekeeping script mention the cleanup of invalid RRD files and that doing so "requires $config['file'] to be set correctly to the path of the file magic utility." I can't find any reference to $config['file'], magic file utilities, etc. in the default config.php, my current config.php, or anywhere online, mailing list archives, etc. What is this in reference to? It doesn't seem to be set anywhere. Did I miss something? Consequently, whenever I run `housekeeping.php -r` with that option defaulted to TRUE, the process hangs and doesn't seem to do anything. Setting it to FALSE immediately deletes stale RRD files (by time via $config['housekeeping']['rrd']['age'] = timeInSeconds;) and completes the process. I checked housekeeping.log and there are no entries for 'invalid' (what I assume an invalid RRD file would log based on the rrd.inc.php module) and my log file goes back to 2014, so I know I’m not missing something that has rotated out. I'm running 0.16.3.7663 for reference.

4 4

Database schema out of whack
by Sean Pedersen 14 Mar '16

14 Mar '16

I’m not sure how this happened. I ran into some seemingly unrelated issues and one of the many issues I’ve been troubleshooting since is the apparent destruction of my database schema. Here’s the output of `discovery.php -u`: 000 -> 001 ... (db) done. 001 -> 002 ... (db) done (5 errors). 002 -> 003 ... (db) done (2 errors). 003 -> 004 ... (db) done (3 errors). 004 -> 005 ... (db) done (4 errors). 005 -> 006 ... (db) done. 006 -> 007 ... (db) done (1 errors). 007 -> 008 ... (db) done (1 errors). 008 -> 009 ... (db) done. 009 -> 010 ... (db) done (1 errors). 010 -> 011 ... (db) done. 011 -> 012 ... (db) done. 012 -> 013 ... (db) done (1 errors). 013 -> 014 ... (db) done. 014 -> 015 ... (db) done (1 errors). 015 -> 016 ... (db) done (4 errors). 016 -> 017 ... (db) done. 017 -> 018 ... (db) done (2 errors). 018 -> 019 ... (db) done. 019 -> 020 ... (db) done (6 errors). 020 -> 021 ... (db) done (1 errors). 021 -> 022 ... (db) done (1 errors). 022 -> 023 ... (db) done (5 errors). 023 -> 024 ... (db) done (2 errors). 024 -> 025 ... (db) done (10 errors). 025 -> 026 ... (db) done. 026 -> 027 ... (db) done. 027 -> 028 ... (db) done (11 errors). 028 -> 029 ... (db) done. 029 -> 030 ... (db) done (2 errors). 030 -> 031 ... (db) done (1 errors). 031 -> 032 ... (db) done (2 errors). 032 -> 033 ... (db) done. 033 -> 034 ... (db) done. 034 -> 035 ... (db) done (1 errors). 035 -> 036 ... (db) done (1 errors). 036 -> 037 ... (db) done. 037 -> 038 ... (db) done (2 errors). 038 -> 039 ... (db) done. 039 -> 040 ... (db) done. 040 -> 041 ... (db) done (2 errors). 041 -> 042 ... (db) done. 042 -> 043 ... (db) done (4 errors). 043 -> 044 ... (db) done (1 errors). 044 -> 045 ... (db) done (4 errors). 045 -> 046 ... (db) done. 046 -> 047 ... (db) done. 047 -> 048 ... (db) done (1 errors). 048 -> 049 ... (db) done (1 errors). 049 -> 050 ... (db) done. 050 -> 051 ... (db) done. 051 -> 052 ... (db) done. 052 -> 053 ... (db) done. 053 -> 054 ... (db) done (1 errors). 054 -> 055 ... (db) done (4 errors). 055 -> 056 ... (db) done (1 errors). 056 -> 057 ... (db) done (1 errors). 057 -> 058 ... (db) done (1 errors). 058 -> 059 ... (db) done (1 errors). 059 -> 060 ... (db) done (1 errors). 060 -> 061 ... (db) done (1 errors). 061 -> 062 ... (db) done (1 errors). 062 -> 063 ... (db) done (4 errors). 063 -> 064 ... (db) done. 064 -> 065 ... (db) done. 065 -> 066 ... (db) done. 066 -> 067 ... (db) done. 067 -> 068 ... (db) done (1 errors). 068 -> 069 ... (db) done. 069 -> 070 ... (db) done (1 errors). 070 -> 071 ... (db) done. 071 -> 072 ... (db) done (1 errors). 072 -> 073 ... (db) done. 073 -> 074 ... (php) Updating netscaler service RRDs 074 -> 075 ... (db) done (1 errors). 075 -> 076 ... (db) done (1 errors). 076 -> 077 ... (db) done. 077 -> 078 ... (db) done. 078 -> 079 ... (db) done. 079 -> 080 ... (db) done. 080 -> 081 ... (db) done. 081 -> 082 ... (db) done (1 errors). 082 -> 083 ... (db) done. 083 -> 084 ... (db) done. 084 -> 085 ... (db) done (1 errors). 085 -> 086 ... (db) done. 086 -> 087 ... (db) done (1 errors). 087 -> 088 ... (db) done. 088 -> 089 ... (db) done (5 errors). 089 -> 090 ... (db) done (3 errors). 090 -> 091 ... (db) done (1 errors). 091 -> 092 ... (db) done (2 errors). 092 -> 093 ... (db) done (2 errors). 093 -> 094 ... (db) done. 094 -> 095 ... (php) Converting alert serialize() arrays to JSON: ........................................ 095 -> 096 ... (db) done (1 errors). 096 -> 097 ... (db) done. 097 -> 098 ... (db) done. 098 -> 099 ... (db) done (1 errors). 099 -> 100 ... (db) done (1 errors). 100 -> 101 ... (db) done (1 errors). 101 -> 102 ... (db) done. 102 -> 103 ... (db) done (1 errors). 103 -> 104 ... (db) done (1 errors). 104 -> 105 ... (db) done. 105 -> 106 ... (db) done (2 errors). 106 -> 107 ... (db) done. 107 -> 108 ... (db) done (1 errors). 108 -> 109 ... (db) done. 109 -> 110 ... (db) done (1 errors). 110 -> 111 ... (db) done (2 errors). 111 -> 112 ... (db) done (1 errors). 112 -> 113 ... (db) done. 113 -> 114 ... (db) done (1 errors). 114 -> 115 ... (db) done (1 errors). 115 -> 116 ... (db) done. 116 -> 117 ... (db) done. 117 -> 118 ... (db) done. 118 -> 119 ... (db) done. 119 -> 120 ... (db) done. 120 -> 121 ... (db) done. 121 -> 122 ... (db) done (3 errors). 122 -> 123 ... (db) done. 123 -> 124 ... (db) done (1 errors). 124 -> 125 ... (db) done (1 errors). 125 -> 126 ... (db) done (2 errors). 126 -> 127 ... (php) Converting FDB count RRD ds fdb->value: ...................................................................................................................................................................................................................................................... 127 -> 128 ... (php) Rename old storage RRDs and DB: 128 -> 129 ... (php) Rename old mempools RRDs and DB: 129 -> 130 ... (db) done. 130 -> 131 ... (db) done. 131 -> 132 ... (db) done. 132 -> 133 ... (db) done (1 errors). 133 -> 134 ... (db) done (1 errors). 134 -> 135 ... (db) done (1 errors). 135 -> 136 ... (db) done (1 errors). 136 -> 137 ... (db) done. 137 -> 138 ... (db) done. 138 -> 139 ... (db) done (4 errors). 139 -> 140 ... (db) done. 140 -> 141 ... (db) done (3 errors). 141 -> 142 ... (db) done (1 errors). 142 -> 143 ... (db) done. 143 -> 144 ... (db) done. 144 -> 145 ... (db) done (1 errors). 145 -> 146 ... (db) done. 146 -> 147 ... (db) done. 147 -> 148 ... (db) done (3 errors). 148 -> 149 ... (db) done. 149 -> 150 ... (db) done (6 errors). 150 -> 151 ... (db) done. 151 -> 152 ... (db) done. 152 -> 153 ... (php) Converting RRD ds type for tcpCurrEstab COUNTER->GAUGE: ....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................... 153 -> 154 ... (db) done (1 errors). 154 -> 155 ... (db) done (1 errors). 155 -> 156 ... (db) done (1 errors). 156 -> 157 ... (db) done (1 errors). 157 -> 158 ... (db) done (1 errors). 158 -> 159 ... (db) done. 159 -> 160 ... (db) done. 160 -> 161 ... (db) done (1 errors). 161 -> 162 ... (db) done. 162 -> 163 ... (db) done. 163 -> 164 ... (php) Superseded by update 165 164 -> 165 ... (php) Adding MIN RRA to very old RRD files: * hr_processes: ..... * hr_users: ..... * ucd_contexts: ... * ucd_load: ... * ucd_interrupts: ... 165 -> 166 ... (db) done (1 errors). 166 -> 167 ... (db) done. 167 -> 168 ... (db) done. 168 -> 169 ... (db) done. 169 -> 170 ... (php) Move old GEO data if exist: ---------------- 170 -> 171 ... (db) done. 171 -> 172 ... (db) done. 172 -> 173 ... (db) done. 173 -> 174 ... (db) done (3 errors). 174 -> 175 ... (db) done (2 errors). 175 -> 176 ... (php) Clean incorrect syslog entries: 176 -> 177 ... (php) Clean incorrect manual geolocation: 177 -> 178 ... (db) done (5 errors). 178 -> 179 ... (db) done (2 errors). 179 -> 180 ... (db) done. 180 -> 181 ... (db) done. 181 -> 182 ... (db) done. 182 -> 183 ... (db) done. 183 -> 184 ... (db) done (3 errors). 184 -> 185 ... (db) done. 185 -> 186 ... (db) done (9 errors). 186 -> 187 ... (php) 187 -> 188 ... (db) done. 188 -> 189 ... (db) done (2 errors). 189 -> 190 ... (db) done (2 errors). 190 -> 191 ... (php) Migrating state sensors to status entries: 191 -> 192 ... (db) done (2 errors). 192 -> 193 ... (db) done (1 errors). 193 -> 194 ... (db) done (1 errors). 194 -> 195 ... (db) done (3 errors). 195 -> 196 ... (db) done (1 errors). 196 -> 197 ... (db) done. 197 -> 198 ... (db) done. 198 -> 199 ... (db) done. 199 -> 200 ... (db) done (2 errors). 200 -> 201 ... (db) done. 201 -> 202 ... (db) done. 202 -> 203 ... (db) done (1 errors). 203 -> 204 ... (db) done. 204 -> 205 ... (db) done. 205 -> 206 ... (db) done (4 errors). 206 -> 207 ... (db) done (1 errors). 207 -> 208 ... (db) done (1 errors). 208 -> 209 ... (db) done (5 errors). 209 -> 210 ... (php) 210 -> 211 ... (db) done (3 errors). 211 -> 212 ... (php) 212 -> 213 ... (db) done (11 errors). 213 -> 214 ... (db) done. 214 -> 215 ... (db) done (1 errors). 215 -> 216 ... (db) done (2 errors). 216 -> 217 ... (db) done. 217 -> 218 ... (db) done. 218 -> 219 ... (db) done. 219 -> 220 ... (db) done (4 errors). 220 -> 221 ... (db) done (1 errors). 221 -> 222 ... (db) done. 222 -> 223 ... (db) done (1 errors). 223 -> 224 ... (db) done. 224 -> 225 ... (db) done. 225 -> 226 ... (db) done. 226 -> 227 ... (db) done (2 errors). 227 -> 228 ... (db) done (10 errors). 228 -> 229 ... (db) done (1 errors). 229 -> 230 ... (db) done (1 errors). 230 -> 231 ... (db) done. 231 -> 232 ... (db) done. 232 -> 233 ... (db) done (2 errors). 233 -> 234 ... (db) done (1 errors). 234 -> 235 ... (db) done. 235 -> 236 ... (db) done (1 errors). 236 -> 237 ... (db) done. 237 -> 238 ... (db) done. 238 -> 239 ... (db) done (1 errors). 239 -> 240 ... (db) done (3 errors). 240 -> 241 ... (db) done. 241 -> 242 ... (db) done. 242 -> 243 ... (db) done. 243 -> 244 ... (db) done (3 errors). 244 -> 245 ... (db) done. 245 -> 246 ... (db) done (1 errors). 246 -> 247 ... (db) done (1 errors). 247 -> 248 ... (db) done. 248 -> 249 ... (db) done (1 errors). 249 -> 250 ... (db) done. 250 -> 251 ... (db) done (1 errors). 251 -> 252 ... (db) done (1 errors). 252 -> 253 ... (db) done. 253 -> 254 ... (db) done. 254 -> 255 ... (db) done (1 errors). 255 -> 256 ... (php) 256 -> 257 ... (php) 257 -> 258 ... (php) 258 -> 259 ... (db) done. 259 -> 260 ... (php) 260 -> 261 ... (db) done (5 errors). 261 -> 262 ... (php) 262 -> 263 ... (db) done (1 errors). 263 -> 264 ... (db) done (8 errors). 264 -> 265 ... (db) done (1 errors). 265 -> 266 ... (db) done. 266 -> 267 ... (db) done. 267 -> 268 ... (php) 268 -> 269 ... (php) 269 -> 270 ... (db) done. 270 -> 271 ... (db) done (11 errors). -- Done. So…there are a couple of errors. I grabbed a few samples of db.log and found several examples where columns are missing. Pretty much 99% of the log is failed queries to nonexistent database fields, columns, etc. Here’s two: [2016/03/11 21:39:25 -0700] poller.php(22166): Failed dbQuery (#1054 - Unknown column 'attrib_value' in 'field list'), Query: SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'dbSchema'; mysql> describe observium_attribs; +---------+---------+------+-----+---------+-------+ | Field | Type | Null | Key | Default | Extra | +---------+---------+------+-----+---------+-------+ | version | int(11) | NO | PRI | NULL | | +---------+---------+------+-----+---------+-------+ 1 row in set (0.00 sec) [2016/03/11 21:43:34 -0700] poller.php(18006): Failed dbQuery (#1054 - Unknown column 'device_id' in 'where clause'), Query: SELECT * FROM `devices_attribs` WHERE `device_id` = '136' mysql> describe devices_attribs; +--------------+--------------+------+-----+-------------------+-----------------------------+ | Field | Type | Null | Key | Default | Extra | +--------------+--------------+------+-----+-------------------+-----------------------------+ | attrib_id | int(11) | NO | PRI | NULL | auto_increment | | entity_type | varchar(32) | NO | | NULL | | | entity_id | int(11) | NO | MUL | NULL | | | attrib_type | varchar(128) | NO | | NULL | | | attrib_value | text | NO | | NULL | | | updated | timestamp | NO | | CURRENT_TIMESTAMP | on update CURRENT_TIMESTAMP | +--------------+--------------+------+-----+-------------------+-----------------------------+ 6 rows in set (0.00 sec) Outside of `discovery.php -u` that is failing, is it possible to recover the schema? I would imagine doing it manually is the only way. Is it worth it?

2 7

Newbie with a question
by Daniel Martín Mayo 14 Mar '16

14 Mar '16

Hello everybody, Im new to this mailing list and also to Observium. Im just another SysAdmin trying to monitor as many devices as we can in our company (Nagios is still doing his job fine), so we started trying Observium just to see if it was worthy or not. I got installed the Community version using the OVA, so first question is: If I switch to the Pro version, do I need to rebuild all the work Ive done? Greetings from Spain, Dani Martin

5 8

Delay on down devices
by Louis Bailleul 14 Mar '16

14 Mar '16

Hi, Is it possible to add a delay for the built in down device alert ? Or even better, can I replace the built in alert with custom checkers ? So I can add a delay on specifics sets of devices. Best regards, Louis [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/PGS_LOGO_RGB_42x53px.jpg]<http://www.pgs.com> Louis Bailleul Computer Systems Engineer Imaging & Engineering | Imaging Telephone: +44 1932 376000 Direct: +44 1932 376842 VOIP: 74416842 Mobile: +44 7786 525307 Email: louis.bailleul(a)pgs.com<mailto:Louis.Bailleul@pgs.com> A Clearer Image | www.pgs.com<http://www.pgs.com> [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/150731-ColourWave-660x14…] Address: 4 The Heights, Brooklands, Weybridge, Surrey, KT13 0NY, United Kingdom This e-mail, including any attachments and response string, may contain proprietary information which is confidential and may be legally privileged. It is for the intended recipient only. If you are not the intended recipient or transmission error has misdirected this e-mail, please notify the author by return e-mail and delete this message and any attachment immediately. If you are not the intended recipient you must not use, disclose, distribute, forward, copy, print or rely on this e-mail in any way except as permitted by the author.

4 8

backup script for db, config.php, rrd/
by Nick Schmalenberger 14 Mar '16

14 Mar '16

Hi all, I spent my Sunday afternoon (on-call, luckily quiet though :) writing this backup script for Observium. It takes a backup destination directory and number of backups to keep using rotation which is 0 by default. Then it makes a tmp directory. It copies config.php there, does a mysql dump, and copies rrd/ into the tmp directory. It tars up the tmp directory into a tarball in the backup directory and deletes the tmp directory. It is meant to run from the scripts/ directory, it maybe isnt as polished as the other main scripts or compatible with all systems because of different options with the commands it runs. Its working for me though on my Ubuntu 14.04 test system. Please offer suggestions! Thanks. -Nick

1 1

How to reset the Admin password
by Sathish.I 12 Mar '16

12 Mar '16

Hello All, Can you please let me know how to reset GUI admin password. I have lost the password. Regards, sathish

3 6

Changing the Mysql connections graph format
by Louis Bailleul 11 Mar '16

11 Mar '16

Hi, I found the Mysql connections graph a little difficult to read. So I changed it to use lines instead of stacked area. It is still not perfect because of the huge scale imposed by drawing the maximum number of connection and maximum number of connection reached. But at least you can actually read the value of your spikes of connections instead of working out the difference between the number of connection + max number of connection reached. Before : [cid:image001.png@01D17BB3.BAD5C7F0] After : [cid:image002.png@01D17BB3.BAD5C7F0] The diff of the file : svn diff -r HEAD /opt/observium/html/includes/graphs/application/mysql_connections.inc.php Index: /opt/observium/html/includes/graphs/application/mysql_connections.inc.php =================================================================== --- /opt/observium/html/includes/graphs/application/mysql_connections.inc.php (revision 7661) +++ /opt/observium/html/includes/graphs/application/mysql_connections.inc.php (working copy) @@ -40,6 +40,6 @@ $nototal = 1; $unit_text = "Connections"; -include("includes/graphs/generic_multi_simplex_separated.inc.php"); +include("includes/graphs/generic_multi_line.inc.php"); // EOF Best regards, Louis [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/PGS_LOGO_RGB_42x53px.jpg]<http://www.pgs.com> Louis Bailleul Computer Systems Engineer Imaging & Engineering | Imaging Telephone: +44 1932 376000 Direct: +44 1932 376842 VOIP: 74416842 Mobile: +44 7786 525307 Email: louis.bailleul(a)pgs.com<mailto:Louis.Bailleul@pgs.com> A Clearer Image | www.pgs.com<http://www.pgs.com> [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/150731-ColourWave-660x14…] Address: 4 The Heights, Brooklands, Weybridge, Surrey, KT13 0NY, United Kingdom This e-mail, including any attachments and response string, may contain proprietary information which is confidential and may be legally privileged. It is for the intended recipient only. If you are not the intended recipient or transmission error has misdirected this e-mail, please notify the author by return e-mail and delete this message and any attachment immediately. If you are not the intended recipient you must not use, disclose, distribute, forward, copy, print or rely on this e-mail in any way except as permitted by the author.

1 0