- observium - lists.observium.org

Howto Integrate observium alerts with external event monitoring tool
by Ruiz, Carlos 11 Mar '16

11 Mar '16

good morning everyone, We're evaluating to use observium as our hardware monitoring solution for some datacenters, but we need to clearly understand how can we integrate the generated alerts in the tool with external event monitoring solutions that are the ones used by our Operation Center guys. I guess that we can run queries against the mysql table hosting such events, is there any other possibilities? Maybe interact with mysql DB is the recommended way, that way can any of you share with me the data model of such table? Thanks in advance for your help and sorry for the generic questions, but we're starting with the evaluation activity and we're at observium rookie level Kind Regards -- Carlos Ruiz Compute System Management Senior Engineer Roche Farma, S.A.Josefa Valcarcel, 40. ES-28027 Madrid (Spain) Phone: +34 91 305 99 25 Mobile: +34 662 10 46 14 * *

2 1

Avoid adding round robin dns devices
by Louis Bailleul 11 Mar '16

11 Mar '16

Hi, I have some devices that are configured with a round robin DNS entry. I believe that as we are running lldp on servers too, the auto discovery pick them up and add them. But as the picture below shows, this is pretty much useless as each polling end up on a different server. (You can see that the sysdescr and sysname contains contradictory data : lxfer01 and lxfer02) Would it be possible to detect that the FQDN is a round robin alias and avoid adding it as a new device ? And it would be perfect if it could be the same for CNAME as well, as it is not really worthwhile having Observium polling a node for each of its aliases. [cid:image001.png@01D17B91.B4998790] Best regards, Louis [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/PGS_LOGO_RGB_42x53px.jpg]<http://www.pgs.com> Louis Bailleul Computer Systems Engineer Imaging & Engineering | Imaging Telephone: +44 1932 376000 Direct: +44 1932 376842 VOIP: 74416842 Mobile: +44 7786 525307 Email: louis.bailleul(a)pgs.com<mailto:Louis.Bailleul@pgs.com> A Clearer Image | www.pgs.com<http://www.pgs.com> [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/150731-ColourWave-660x14…] Address: 4 The Heights, Brooklands, Weybridge, Surrey, KT13 0NY, United Kingdom This e-mail, including any attachments and response string, may contain proprietary information which is confidential and may be legally privileged. It is for the intended recipient only. If you are not the intended recipient or transmission error has misdirected this e-mail, please notify the author by return e-mail and delete this message and any attachment immediately. If you are not the intended recipient you must not use, disclose, distribute, forward, copy, print or rely on this e-mail in any way except as permitted by the author.

3 4

I got alert mail in every 5 minutes. Bug? V2 :)
by Laszlo Nemeth 11 Mar '16

11 Mar '16

Hi All, Some week ago i wrote a mail because we found an alert bug and we got lot of mails (in every 5. minutes) instead of just 1 in 24 hours. This Observium was an updated from the 2015.07 CE to the latest (CE.0.16.1.7533). We thougth that the problem was because of the upgrade process and the alert function was new and something went bad.... Now i made a clear install of the latest Observium CE from .tgz. I added only one host, add the same alert, and i’m receiving again the alerts mail in every 5. minutes. I didn’t touch any file just the config.php because of the SQL access of the Observium! I added a host (emaussw01). It is a Cisco Nexus device with 7 FEX modules. I see the temperatures of FEXs (4 values from every FEX) all is under 50C but not one module. This module are the "FEX-111 Module-1 Die-1". This is over 50C. I add an alert, export is this: <?xml version="1.0"?> <templates> <template type="alert" description="Autogenerated observium template" version="0.91" created="Thu, 10 Mar 2016 15:29:04 +0100" observium="0.16.1.7533" id="73249fd2b23ef5f715d749ce2e98be41"> <entity_type>sensor</entity_type> <name>emaussw01 temp check</name> <message>Temp alarm!</message> <severity>crit</severity> <suppress_recovery>0</suppress_recovery> <delay>0</delay> <conditions_and>1</conditions_and> <conditions>sensor_value gt 50</conditions> <conditions_complex>sensor_value gt 50</conditions_complex> <associations> <device>hostname eq emaussw01</device> <entity>sensor_class is temperature</entity> </associations> </template> </templates> I associated one user for this check via email alert. Alert history is: Date Device Alert Check Entity Message Status 2016-03-10 15:38:26 emaussw01 emaUSSW01 temp check Fex-111 Module-1 Die-1 Alert notification sent ALERT_NOTIFY 2016-03-10 15:34:15 emaussw01 emaUSSW01 temp check Fex-111 Module-1 Die-1 Alert notification sent ALERT_NOTIFY 2016-03-10 15:29:12 emaussw01 emaUSSW01 temp check Fex-111 Module-1 Die-1 Alert notification sent ALERT_NOTIFY 2016-03-10 15:24:06 emaussw01 emaUSSW01 temp check Fex-111 Module-1 Die-1 Alert notification sent ALERT_NOTIFY 2016-03-10 15:18:29 emaussw01 emaUSSW01 temp check Fex-111 Module-1 Die-1 Alert notification sent ALERT_NOTIFY 2016-03-10 15:14:07 emaussw01 emaUSSW01 temp check Fex-111 Module-1 Die-1 Alert notification sent ALERT_NOTIFY 2016-03-10 15:08:29 emaussw01 emaUSSW01 temp check Fex-111 Module-1 Die-1 Alert notification sent ALERT_NOTIFY 2016-03-10 15:03:51 emaussw01 emaUSSW01 temp check Fex-111 Module-1 Die-1 Alert notification sent ALERT_NOTIFY And i got email allways (1 minutes earlier) when ALERT_NOTIFY is present in the log: # grep -i "Date: Thu” /var/spool/mail/obstestuser Date: Thu, 10 Mar 2016 15:02:50 +0100 Date: Thu, 10 Mar 2016 15:07:28 +0100 Date: Thu, 10 Mar 2016 15:13:07 +0100 Date: Thu, 10 Mar 2016 15:17:28 +0100 Date: Thu, 10 Mar 2016 15:23:06 +0100 Date: Thu, 10 Mar 2016 15:28:11 +0100 Date: Thu, 10 Mar 2016 15:33:14 +0100 Date: Thu, 10 Mar 2016 15:37:26 +0100 What can i debug for resolve this problem? Thanks! Regards Laszlo

3 6

freeradius agent and "PHP Fatal error: Call-time pass-by-reference has been removed in" [SEC=UNCLASSIFIED]
by Peter.Hine＠familycourt.gov.au 11 Mar '16

11 Mar '16

ref 1: http://wiki.freeradius.org/config/Status ref 2: http://stackoverflow.com/questions/8971261/php-5-4-call-time-pass-by-refere… freeradius v3.0 php5 v5.5 I've updated $radmsg IAW ref 1 $radmsg = "Message-Authenticator = 0x00, FreeRADIUS-Statistics-Type = $ statstype, Response-Packet-Type = Access-Accept"; running radclient as noted in ref1 also works. So all setup and working. ref2 indicates the fault is easy to fix but i can't understand it. -------- dc2radius1:/usr/lib/observium_agent/local root $ ./freeradius PHP Fatal error: Call-time pass-by-reference has been removed in /usr/lib/observium_agent/local/freeradius on line 54 -------- line 54: exec("echo '$radmsg' | $radcmd", &$out, $retval); how might line 54 be altered to actually run. The alternatively is to rewrite it as a shell script (cause thats how programmers work, they rewrite in the language they know). thanks Peter Hine Senior Technical Support Engineer (Servers) FCoA ITS peter.hine(a)familycourt.gov.au ********************************************************************** The information contained in this e-mail (including any attachments) is for the exclusive use of the addressee. If you are not the intended recipient please notify the sender immediately and delete this e-mail. It is noted that legal privilege is not waived because you have read this e-mail. **********************************************************************

4 6

Alert Checks on Observium reports device down when they are actually not
by Arya, Renuka [MED] 10 Mar '16

10 Mar '16

Hi Team, I have setup the following Alert on my Observium device. See attachment (Alert_DeviceDown). I sometimes get the alerts that the device is down . See attachment (Devices_Down). However, the devices were actually not down. So most likely it is the Server on which Observium is install, do not get a ping response from the switch(device we monitoring). I ran MTR tests between the Observium server and switch in question, I don't see any packet losses, but I do see average RTT of 0.2 ms and worst RTT as 3.8 ms. So, is it possible when Observium does not get a ping response from the switch in the desirable amount of time, it marks it DOWN. How this desirable amount is calculated. Is there way we can edit this? Or is there any other recommended way for monitoring the devices? Thanks! Regards Renuka ******************************************************************************** This e-mail is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged and confidential. If the reader of this e-mail message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is prohibited. If you have received this e-mail in error, please notify the sender and destroy all copies of the transmittal. Thank you University of Chicago Medicine and Biological Sciences ********************************************************************************

4 8

CE-edition; Sorting of Health-status columns?
by Pål Rydningen 09 Mar '16

09 Mar '16

Is it a design-choice to not being able to sort by columns in the Health page? As in ... Sort ascending/decending by Memory Usage, Toner usage, CPU etc. This is CE edition. -- Pål R.

2 2

db.log full after upgrade to Observium CE 0.16.1.7533
by Mike Driscoll 09 Mar '16

09 Mar '16

After upgrade, all seemed well until my disk filled up. db.log contains countless entries about unknown columns. A couple examples are below. I completed the schema update and full discovery at the end of the upgrade process per: http://www.observium.org/docs/updating/ <http://www.observium.org/docs/updating/>. Rerunning discovery.php -u says my schema is up to date. But something isn’t right. Is there a way to force the schema update to run again? Perhaps that will install all the missing columns? [2016/03/07 18:01:22 +0000] poller.php(9947): Failed dbQuery (#1054 - Unknown column 'port_label_short' in 'field list'), Query: UPDATE `ports` set `port_label` ='Vlan1',`port_label_short` ='Vlan1',`ifLastChange` ='2016-03-04 22:27:35' WHERE `port_id` = '2412' [2016/03/07 16:16:10 +0000] poller.php(23363): Failed dbQuery (#1054 - Unknown column 'entity_id' in 'field list'), Query: INSERT INTO `eventlog` (`device_id`,`entity_id`,`entity_type`,`timestamp`,`severity`,`message`) VALUES ('78','42018','port',NOW(),'6','Interface changed: [port_label] \'\' -> \'xe-0/1/1\'; [port_label_short] \'\' -> \'xe-0/1/1\'; [ifLastChange] \'2015-04-27 15:45:11\' -> \'2015-04-27 22:47:09\'')

5 10

Alert by CustomOID
by chott＠praha1.net 09 Mar '16

09 Mar '16

Hello everybody,§ Can i create Alert check for CustomOID value ? Tom

2 2

freeradius agent and "PHP Fatal error: Call-time pass-by-reference has been removed in" [SEC=UNCLASSIFIED]
by Peter.Hine＠familycourt.gov.au 09 Mar '16

09 Mar '16

ref 1: http://wiki.freeradius.org/config/Status ref 2: http://stackoverflow.com/questions/8971261/php-5-4-call-time-pass-by-refere… freeradius v3.0 php5 v5.5 I've updated $radmsg IAW ref 1 $radmsg = "Message-Authenticator = 0x00, FreeRADIUS-Statistics-Type = $ statstype, Response-Packet-Type = Access-Accept"; running radclient as noted in ref1 also works. So all setup and working. ref2 indicates the fault is easy to fix but i can't understand it. -------- dc2radius1:/usr/lib/observium_agent/local root $ ./freeradius PHP Fatal error: Call-time pass-by-reference has been removed in /usr/lib/observium_agent/local/freeradius on line 54 -------- line 54: exec("echo '$radmsg' | $radcmd", &$out, $retval); how might line 54 be altered to actually run. The alternatively is to rewrite it as a shell script (cause thats how programmers work, they rewrite in the language they know). thanks Peter Hine Senior Technical Support Engineer (Servers) FCoA ITS peter.hine(a)familycourt.gov.au ********************************************************************** The information contained in this e-mail (including any attachments) is for the exclusive use of the addressee. If you are not the intended recipient please notify the sender immediately and delete this e-mail. It is noted that legal privilege is not waived because you have read this e-mail. **********************************************************************

1 0

ZFS on Linux
by Ximena Cardinali 08 Mar '16

08 Mar '16

Hello there, is there anyone around here using ZFS on Linux (more precisely Debian) and made it work with Observium and SNMP? We just implemented ZFS on some Servers and we would like to monitor the pools within Observium. Regards, Ximena.

3 2

Poller-wrapper - get_http_request() exit with timeout
by Ivan Biasi 08 Mar '16

08 Mar '16

Hi all does anyone ever met the following timeout error message during the polling cycle ? Any idea on what's the impact and how to solve ? Here following a section of the log file made by the output of: */5 * * * * root /opt/observium/poller-wrapper.py 5 >> /opt/observium/logs/poller-wrapper.log 2>&1 ================================================== .... [2016/03/07 15:15:34 +0100] poller.php(29544): /opt/observium/poller.php: <hostname...> - 1 devices polled in 1.546 secs [2016/03/07 15:15:38 +0100] poller.php(29402): /opt/observium/poller.php: <hostname...> - 1 devices polled in 6.969 secs [2016/03/07 15:15:39 +0100] poller-wrapper.py(27564): /opt/observium/poller-wrapper.py: polled 25 devices in 37 seconds with 5 workers [2016/03/07 15:20:05 +0100] poller.php(29849): get_http_request() exit with timeout. Access to outside localnet is blocked by firewall or network problems. Check pr oxy settings. ... ... [2016/03/07 15:20:50 +0100] poller-wrapper.py(29826): /opt/observium/poller-wrapper.py: polled 25 devices in 47 seconds with 5 workers [2016/03/07 15:25:02 +0100] poller.php(816): get_http_request() exit with timeout. Access to outside localnet is blocked by firewall or network problems. Check proxy settings. ================================================== The system is apparently collecting data but, being a new test/evaluation activation, I don't known if something is missing. Thanks a lot, regards I.

3 5

Problem with new Cisco switches
by chott＠praha1.net 08 Mar '16

08 Mar '16

Hello team, we have new Cisco SG350XG 10gbit switches, but we have problem with Discovery because Observium resolve as "Generic device" iso.3.6.1.2.1.1.1.0 = STRING: "SG350XG-2F10 12-Port 10G Stackable Managed Switch" iso.3.6.1.2.1.1.2.0 = OID: iso.3.6.1.4.1.9.6.1.91.12.9 iso.3.6.1.2.1.1.3.0 = Timeticks: (3550400) 9:51:44.00 iso.3.6.1.2.1.1.4.0 = STRING: "" iso.3.6.1.2.1.1.5.0 = STRING: "" iso.3.6.1.2.1.1.6.0 = STRING: "" iso.3.6.1.2.1.1.7.0 = INTEGER: 6 iso.3.6.1.2.1.1.8.0 = Timeticks: (0) 0:00:00.00 iso.3.6.1.2.1.1.9.1.2.1 = OID: iso.3.6.1.4.1.89.73 iso.3.6.1.2.1.1.9.1.3.1 = STRING: "RS capabilities" iso.3.6.1.2.1.1.9.1.4.1 = Timeticks: (0) 0:00:00.00 [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 733 123 135 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

1 2

Create an alert checker on a custom OID
by Fredrik Winäs 07 Mar '16

07 Mar '16

Hi I have a couple of custom OID that I track, is it possible to make an alert checker on these? [cid:image001.png@01D1788A.29969750] thanks Med Vänlig Hälsning Fredrik Winäs tel +46 31 762 02 43 fredrik.winas(a)cgit.se<mailto:fredrik.winas@cgit.se> www.cgit.se<http://www.cgit.se/> CGit AB Taljegårdsgatan 11C SE-431 53 Mölndal

2 1

PPPoE session graphs on ASR1000
by Senses0 07 Mar '16

07 Mar '16

Hi, PPPoE graphs on our Cisco ASR1000 boxes no longer has any value. This is starting from a little over a week ago. Are these MIBS removed or these graphs have been removed? Have a look at the attached screenshot.

1 0

Re: [Observium] Set fixed scale of Y-axis on mini-graphs?
by Henrik Cednert (Filmlance) 06 Mar '16

06 Mar '16

Impossibruuu? -- Henrik Cednert cto | td | compositor Filmlance International mobile [ + 46 (0)704 71 89 54 ] skype [ cednert ] On 04/02/16 09:40, "observium on behalf of Henrik Cednert (Filmlance)" <observium-bounces(a)observium.org on behalf of henrik.cednert(a)filmlance.se> wrote: >Hello > >I'd like to set fixed values of the Y axis on the minigraphs. Is that possible? I don't find much value of the adaptive scaling since it means I have to read the AXIS and not only throw a quick eye at it to see anomalies. > >Cheers and thans > >-- >Henrik Cednert >cto | td | compositor > >Filmlance International >Direct + 46 (0)704 71 89 54 > > >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 5

Observium-Rancid Integration
by Sathish.I 05 Mar '16

05 Mar '16

Hello All, I have integrated the rancid with observium. In the initial stage for 2 days it worked well, backup are pulled as per cronjob. After some days, I observed backup are happening few devices rest are shown in GUI. However, when I checked the status in /var/lib/rancid/observium/configs/ the backup files are successfully taken And when checked the rancid logs in /var/log/rancid/ I have seen for few devices (which shown in GUI) the Sending configs/xxxx Sending configs/yyyy Transmitting file data .. Committed revision 216. NOTE: The list varies from time to time. Please suggest what could be the issue and solution if any. Regards, sathish

2 1

Cannot add CAB 4+ printer
by Ronald 05 Mar '16

05 Mar '16

I'm working for a small company in the floral sector. We have several types of printers. From conventional multifunctionals to label printers (CAB, Zebra). I can add the Zebra printers, but not the cab printers. It appears that Observium is looking for objects with a different suffix. I searched around the site and did some Googling. But I was not able to sort this out myself. [root@bl-bug01 bl]# tcpdump -i ens32 host 192.168.0.153 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on ens32, link-type EN10MB (Ethernet), capture size 65535 bytes 11:29:00.627323 IP bl-bug01.bloominess.nl.54058 > bl_planten_artikel.snmp: GetRequest(42) system.sysObjectID.0 system.sysUpTime.0 11:29:00.628053 IP bl_planten_artikel.snmp > bl-bug01.bloominess.nl.54058: GetResponse(48) system.sysObjectID.0=[noSuchObject] system.sysUpTime.0=[noSuchObject] 11:29:00.651719 IP bl-bug01.bloominess.nl.36372 > bl_planten_artikel.snmp: GetRequest(31) E:39165.1.1.0 11:29:00.652297 IP bl_planten_artikel.snmp > bl-bug01.bloominess.nl.36372: GetResponse(35) E:39165.1.1.0=[noSuchObject] 11:29:05.643513 ARP, Request who-has bl_planten_artikel tell bl-bug01.bloominess.nl, length 28 11:29:05.643808 ARP, Reply bl_planten_artikel is-at 00:02:e7:05:47:66 (oui Unknown), length 46 11:29:06.332982 ARP, Request who-has bl_planten_artikel tell bl_planten_artikel, length 46 ^C 7 packets captured 7 packets received by filter 0 packets dropped by kernel [root@bl-bug01 bl]# [root@bl-bug01 bl]# [root@bl-bug01 bl]# [root@bl-bug01 bl]# snmpwalk -v2c -c public 192.168.0.153 SNMPv2-MIB::sysDescr.1 = STRING: A4+/300 (3.38/May 8 2015) SNMPv2-MIB::sysObjectID.1 = OID: SNMPv2-SMI::enterprises.15865.1.1 SNMPv2-MIB::sysUpTime.1 = Timeticks: (190538900) 22 days, 1:16:29.00 Am I missing something? Ronald

2 1

Alerts rrd in wrong directory
by Louis Bailleul 04 Mar '16

04 Mar '16

Hi all, I just noticed that the rrd for my alerts have been created in the root rrd directoy instead of in each device directory. Is this a known issue ? The alerts availability graphs don’t work as they look for the rrd in the wrong place : RRDTool Output: ERROR: opening '/data/observium/rrd/lswc11u21 /alert-3375.rrd': No such file or directory Total time: 0.012 | RRDtool time: 0.011s # ls -l rrd/alert-337* | head -rw-r--r-- 1 root root 233120 Feb 29 12:25 rrd/alert-3370.rrd -rw-r--r-- 1 root root 233120 Feb 29 12:25 rrd/alert-3371.rrd -rw-r--r-- 1 root root 233120 Feb 29 12:25 rrd/alert-3372.rrd -rw-r--r-- 1 root root 233120 Feb 29 12:25 rrd/alert-3373.rrd -rw-r--r-- 1 root root 233120 Feb 29 12:25 rrd/alert-3374.rrd -rw-r--r-- 1 root root 233120 Feb 29 12:25 rrd/alert-3375.rrd -rw-r--r-- 1 root root 233120 Feb 29 12:25 rrd/alert-3376.rrd -rw-r--r-- 1 root root 233120 Feb 29 12:25 rrd/alert-3377.rrd -rw-r--r-- 1 root root 233120 Feb 29 12:25 rrd/alert-3378.rrd -rw-r--r-- 1 root root 233120 Feb 29 12:25 rrd/alert-3379.rrd It looks like only the visualization code is looking for the rrd in the wrong place. As If I copy the rrd into the right directory the graph is displayed correctly and it shows that it has been updated when the alert failed. I am using the stable svn version : # svn info Path: . Working Copy Root Path: /data/observium URL: http://svn.observium.org/svn/observium/branches/stable Repository Root: http://svn.observium.org/svn Repository UUID: 61d68cd4-352d-0410-923a-c4978735b2b8 Revision: 7599 Node Kind: directory Schedule: normal Last Changed Author: adama Last Changed Rev: 7535 Last Changed Date: 2016-01-27 13:11:02 +0000 (Wed, 27 Jan 2016) Best regards, Louis [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/PGS_LOGO_RGB_42x53px.jpg]<http://www.pgs.com> Louis Bailleul Computer Systems Engineer Imaging & Engineering | Imaging Telephone: +44 1932 376000 Direct: +44 1932 376842 VOIP: 74416842 Mobile: +44 7786 525307 Email: louis.bailleul(a)pgs.com<mailto:Louis.Bailleul@pgs.com> A Clearer Image | www.pgs.com<http://www.pgs.com> [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/150731-ColourWave-660x14…] Address: 4 The Heights, Brooklands, Weybridge, Surrey, KT13 0NY, United Kingdom This e-mail, including any attachments and response string, may contain proprietary information which is confidential and may be legally privileged. It is for the intended recipient only. If you are not the intended recipient or transmission error has misdirected this e-mail, please notify the author by return e-mail and delete this message and any attachment immediately. If you are not the intended recipient you must not use, disclose, distribute, forward, copy, print or rely on this e-mail in any way except as permitted by the author.

2 4

white spaces in the graphs
by Sathish.I 04 Mar '16

04 Mar '16

Hello All, We are observing white spaces in the graphs. Could you please help to resolve the issue. Crontacb. 5 * * * * root /opt/observium/poller.php -h all >> /dev/null 2>&1 5 * * * * root /opt/observium/discovery.php -h new >> /dev/null 2>&1 5 * * * * root /opt/observium/poller-wrapper.py 10 >> /dev/null 2>&1 Config.php -------------------------------------------------------------------------- // Base directory $config['install_dir'] = "/opt/observium"; // Default community list to use when adding/discovering $config['snmp']['community'] = array("public"); // Authentication Model $config['auth_mechanism'] = "mysql"; // default, other options: ldap, http-auth, please see documentation for config help // Enable alerter (not available in CE) $config['poller-wrapper']['alerter'] = TRUE; Regards, sathi

4 9

Purchasing the Professional Edition
by Matthew Hawes 04 Mar '16

04 Mar '16

Greetings everyone I was on this list serv in my previous job and I found it to be a great resource for my Observium installation! Great product ! I know this was brought up on numerous occasions in the past (I tried accessing the archive but had no luck with the link so my apologies and haven't been on the listserv in about 6 months) but are there any other methods to pay for the professional version ? Our team took a look at Observium Community and one downside we all brought up was lack of alerting and the payment method. Thank you and have a great day! Matt Hawes Infrastructure Administrator Purdue University Calumet 219-989-2590 Matthew.Hawes(a)purduecal.edu<mailto:Matthew.Hawes@purduecal.edu>

1 0

SNMPv3 Cisco Meraki AP
by Ben Maschke 04 Mar '16

04 Mar '16

Hi guys, I can query the AP's from the Observium server via CLI: snmpwalk -v3 -a sha -A XXX -u netadmin -x des -X XXX -l authpriv HS-AP-MERAKI-01 iso.3.6.1.2.1.1.1.0 = STRING: "Meraki MR42 Cloud Managed AP" iso.3.6.1.2.1.1.5.0 = STRING: "HS-AP-MERAKI-02" iso.3.6.1.2.1.1.9.1.2.1 = OID: iso.3.6.1.6.3.1 iso.3.6.1.2.1.1.9.1.2.2 = OID: iso.3.6.1.6.3.16.2.2.1 iso.3.6.1.2.1.1.9.1.2.3 = OID: iso.3.6.1.2.1.31 iso.3.6.1.2.1.1.9.1.2.4 = OID: iso.2.840.10036 iso.3.6.1.2.1.1.9.1.3.1 = STRING: "The MIB module for SNMPv2 entities" iso.3.6.1.2.1.1.9.1.3.2 = STRING: "View-based Access Control Model for SNMP." iso.3.6.1.2.1.1.9.1.3.3 = STRING: "The MIB module to describe generic objects for network interface sub-layers" iso.3.6.1.2.1.1.9.1.3.4 = STRING: "The MIB module for managing 802.11 implementations" iso.3.6.1.2.1.1.9.1.4.1 = Timeticks: (0) 0:00:00.00 iso.3.6.1.2.1.1.9.1.4.2 = Timeticks: (0) 0:00:00.00 iso.3.6.1.2.1.1.9.1.4.3 = Timeticks: (1) 0:00:00.01 iso.3.6.1.2.1.1.9.1.4.4 = Timeticks: (1) 0:00:00.01 iso.3.6.1.2.1.2.1.0 = INTEGER: 4 iso.3.6.1.2.1.2.2.1.1.1 = INTEGER: 1 iso.3.6.1.2.1.2.2.1.1.2 = INTEGER: 2 ....... But it's not possible to add the AP's via Web interface (same credentials): [image: Inline images 1] Any ideas? -- *Ben Maschke* Senior Network Engineer *Tel:* +44 (0) 20 8742 6820 *Shazam* 26-28 Hammersmith Grove, London, W6 7HA Please consider the environment before printing this document Shazam Entertainment Limited is incorporated in England and Wales under company number 3998831 and its registered office is at 26-28 Hammersmith Grove, London W6 7HA.

2 3

MSA 2040
by Walter Idsinga 04 Mar '16

04 Mar '16

Just getting started with Observium. Installation and configuration went smooth. Is their somebody that has successfully configured observium with HP MSA 2040 storage appliance. I do get some info, but only little information is returned. [cid:F888D130-F12C-4AF3-9167-EBA422AADDDF] Thank you, Walter Idsinga ________________________________ This email is intended only for the person to whom it is addressed and/or otherwise authorized personnel. The information contained herein and attached is confidential and the property of Newport. If you are not the intended recipient, please be advised that viewing this message and any attachments, as well as copying, forwarding, printing, and disseminating any information related to this email is prohibited, and that you should not take any action based on the content of this email and/or its attachments. If you received this message in error, please contact the sender and destroy all copies of this email and any attachment. Please note that the views and opinions expressed herein are solely those of the author and do not necessarily reflect those of the company. While antivirus protection tools have been employed, you should check this email and attachments for the presence of viruses. No warranties or assurances are made in relation to the safety and content of this email and attachments. Newport accepts no liability for any damage caused by any virus transmitted by or contained in this email and attachments. No liability is accepted for any consequences arising from this email..

2 1

OSPF alert che
by Sathish.I 04 Mar '16

04 Mar '16

Hello All, Please suggest, how can I add alert checker for OSPF. Regards, Sathish Ippani NSE Team CtrlS is India's First and Asia's largest Tier 4 Datacenter operating across India, USA, and UAE Follow us on <https://www.linkedin.com/company/ctrls-datacenters-ltd> Description: Description: Description: Description: Description: Description: http://www.ctrls.com/email-signature/images/linkedin.jpg <https://twitter.com/CtrlSDC> Description: Description: Description: Description: Description: Description: http://www.ctrls.com/email-signature/images/twitter.jpg <https://www.facebook.com/CtrlSDatacenters> Description: Description: Description: Description: Description: Description: http://www.ctrls.com/email-signature/images/facebook.jpg Description: Description: Description: Description: Description: Description: http://www.ctrls.com/email-signature/images/devider.jpg Description: Description: Description: Description: Description: Description: Ctrls Description: Description: Description: Description: Description: Description: http://www.ctrls.com/email-signature/images/devider.jpg CtrlS Datacenters Ltd 16,Software Units Layout, Madapur (HitechCity), Hyderabad 500081, Telangana, India Mob: +91 9515600544 Tel : +91 (40) 420430700 Fax : +91 (40) 23116055

2 2

How to add a custom alert or web site health check in Observium
by David Gietka - NOAA Federal 04 Mar '16

04 Mar '16

Greetings, My office recently purchased Observium and we really enjoy the server stats on CPU, memory and storage. It appears that I can set up other health checks as well but I was not able to find any examples in the HTML help files. What I would like to do is write a simple shell script that returns one of three values: information, warning, and critical and have Observium act on that value with an alert (on warnings and critical error codes). Does anyone have a brief example they can share? Any assistance would be greatly appreciated. Thanks a lot. Regards, David Gietka NGS Webmaster

2 1

Errors shown when adding devices
by KA PDE 04 Mar '16

04 Mar '16

Hi, After the recent upgrade to CE now a huge list of errors is shown if you add a device through the GUI: Duplicate sysObjectID '.1.3.6.1.4.1.6876.4.1' in definitions for OSes: vmware and vmware! Duplicate sysObjectID '.1.3.6.1.4.1.30803' in definitions for OSes: vyatta and vyatta! Duplicate sysObjectID '.1.3.6.1.4.1.44641' in definitions for OSes: vyos and vyos! Duplicate sysObjectID '.1.3.6.1.4.1.5040.1' in definitions for OSes: wut and wut! Duplicate sysObjectID '.1.3.6.1.4.1.94.1.21.2.1' in definitions for OSes: ipso and ipso! Duplicate sysObjectID '.1.3.6.1.4.1.6983.1' in definitions for OSes: sofaware and sofaware! Duplicate sysObjectID '.1.3.6.1.4.1.7779.1' in definitions for OSes: infoblox and infoblox! Duplicate sysObjectID '.1.3.6.1.4.1.1909.10' in definitions for OSes: infratec-rms and infratec-rms! Duplicate sysObjectID '.1.3.6.1.4.1.16174.1' in definitions for OSes: sensatronics and sensatronics! Duplicate sysObjectID '.1.3.6.1.4.1.2.6.11' in definitions for OSes: ibmi and ibmi! Duplicate sysObjectID '.1.3.6.1.4.1.30155.23.1' in definitions for OSes: openbsd and openbsd! Duplicate sysObjectID '.1.3.6.1.4.1.8072.3.2.12' in definitions for OSes: openbsd and openbsd! Duplicate sysObjectID '.1.3.6.1.4.1.42.2.1.1' in definitions for OSes: solaris and solaris! Duplicate sysObjectID '.1.3.6.1.4.1.7247.1.1' in definitions for OSes: nestos and nestos! Duplicate sysObjectID '.1.3.6.1.4.1.2.3.1.2.1.1.2' in definitions for OSes: aix and aix! Duplicate sysObjectID '.1.3.6.1.4.1.2.3.1.2.1.1.3' in definitions for OSes: aix and aix! Duplicate sysObjectID '.1.3.6.1.4.1.1671' in definitions for OSes: adva and adva! Duplicate sysObjectID '.1.3.6.1.4.1.2544' in definitions for OSes: adva and adva! Duplicate sysObjectID '.1.3.6.1.4.1.12740.17.1' in definitions for OSes: equallogic and equallogic! Duplicate sysObjectID '.1.3.6.1.4.1.12740.12.1.1.0' in definitions for OSes: equallogic and equallogic! Duplicate sysObjectID '.1.3.6.1.4.1.664.1' in definitions for OSes: adtran-aos and adtran-aos! Duplicate sysObjectID '.1.3.6.1.4.1.6486.800.1.1.2.1' in definitions for OSes: aos and aos! Duplicate sysObjectID '.1.3.6.1.4.1.6486.800.1.1.2.2.2' in definitions for OSes: aos and aos! Duplicate sysObjectID '.1.3.6.1.4.1.6486.801.1.1.2.1' in definitions for OSes: aos and aos! Duplicate sysObjectID '.1.3.6.1.4.1.6527.' in definitions for OSes: timos and timos! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.729' in definitions for OSes: acsw and acsw! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.730' in definitions for OSes: acsw and acsw! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.824' in definitions for OSes: acsw and acsw! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1231' in definitions for OSes: acsw and acsw! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1291' in definitions for OSes: acsw and acsw! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.828' in definitions for OSes: wlc and wlc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.926' in definitions for OSes: wlc and wlc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1069' in definitions for OSes: wlc and wlc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1279' in definitions for OSes: wlc and wlc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1293' in definitions for OSes: wlc and wlc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1295' in definitions for OSes: wlc and wlc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1615' in definitions for OSes: wlc and wlc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1631' in definitions for OSes: wlc and wlc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1645' in definitions for OSes: wlc and wlc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.2026' in definitions for OSes: wlc and wlc! Duplicate sysObjectID '.1.3.6.1.4.1.14179' in definitions for OSes: wlc and wlc! Duplicate sysObjectID '.1.3.6.1.4.1.3607.' in definitions for OSes: cisco-ons and cisco-ons! Duplicate sysObjectID '.1.3.6.1.4.1.9.10.56' in definitions for OSes: cisco-lms and cisco-lms! Duplicate sysObjectID '.1.3.6.1.4.1.29671.1' in definitions for OSes: meraki and meraki! Duplicate sysObjectID '.1.3.6.1.4.1.29671.2.' in definitions for OSes: meraki and meraki! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1512' in definitions for OSes: cimc and cimc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1513' in definitions for OSes: cimc and cimc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1514' in definitions for OSes: cimc and cimc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1515' in definitions for OSes: cimc and cimc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1516' in definitions for OSes: cimc and cimc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1682' in definitions for OSes: cimc and cimc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1683' in definitions for OSes: cimc and cimc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1684' in definitions for OSes: cimc and cimc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1685' in definitions for OSes: cimc and cimc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1864' in definitions for OSes: cimc and cimc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.1931' in definitions for OSes: cimc and cimc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.2178' in definitions for OSes: cimc and cimc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.2179' in definitions for OSes: cimc and cimc! Duplicate sysObjectID '.1.3.6.1.4.1.9.1.2180' in definitions for OSes: cimc and cimc! Duplicate sysObjectID '.1.3.6.1.4.1.9.6.1.80.' in definitions for OSes: ciscosb and ciscosb! Duplicate sysObjectID '.1.3.6.1.4.1.9.6.1.81.' in definitions for OSes: ciscosb and ciscosb! Duplicate sysObjectID '.1.3.6.1.4.1.9.6.1.82.' in definitions for OSes: ciscosb and ciscosb! Duplicate sysObjectID '.1.3.6.1.4.1.9.6.1.83.' in definitions for OSes: ciscosb and ciscosb! Duplicate sysObjectID '.1.3.6.1.4.1.9.6.1.85.' in definitions for OSes: ciscosb and ciscosb! Duplicate sysObjectID '.1.3.6.1.4.1.9.6.1.87.' in definitions for OSes: ciscosb and ciscosb! Duplicate sysObjectID '.1.3.6.1.4.1.9.6.1.88.' in definitions for OSes: ciscosb and ciscosb! Duplicate sysObjectID '.1.3.6.1.4.1.9.6.1.89.' in definitions for OSes: ciscosb and ciscosb! Duplicate sysObjectID '.1.3.6.1.4.1.9.6.1.11.82.' in definitions for OSes: ciscosb and ciscosb! Duplicate sysObjectID '.1.3.6.1.4.1.3955.' in definitions for OSes: ciscosb and ciscosb! Duplicate sysObjectID '.1.3.6.1.4.1.2011.1.' in definitions for OSes: vrp and vrp! Duplicate sysObjectID '.1.3.6.1.4.1.2011.2.' in definitions for OSes: vrp and vrp! Duplicate sysObjectID '.1.3.6.1.4.1.2011.6.' in definitions for OSes: vrp and vrp! Duplicate sysObjectID '.1.3.6.1.4.1.2011.10.' in definitions for OSes: vrp and vrp! Duplicate sysObjectID '.1.3.6.1.4.1.2011.2.159' in definitions for OSes: huawei-vsp and huawei-vsp! Duplicate sysObjectID '.1.3.6.1.4.1.2011.2.122' in definitions for OSes: huawei-vsp and huawei-vsp! Duplicate sysObjectID '.1.3.6.1.4.1.2011.2.125' in definitions for OSes: huawei-vsp and huawei-vsp! Duplicate sysObjectID '.1.3.6.1.4.1.2011.2.109' in definitions for OSes: huawei-ias and huawei-ias! Duplicate sysObjectID '.1.3.6.1.4.1.2011.2.115' in definitions for OSes: huawei-ias and huawei-ias! Duplicate sysObjectID '.1.3.6.1.4.1.2011.2.128' in definitions for OSes: huawei-ias and huawei-ias! Duplicate sysObjectID '.1.3.6.1.4.1.2011.2.132' in definitions for OSes: huawei-ias and huawei-ias! Duplicate sysObjectID '.1.3.6.1.4.1.2011.2.133' in definitions for OSes: huawei-ias and huawei-ias! Duplicate sysObjectID '.1.3.6.1.4.1.2011.2.134' in definitions for OSes: huawei-ias and huawei-ias! Duplicate sysObjectID '.1.3.6.1.4.1.2011.2.167' in definitions for OSes: huawei-ias and huawei-ias! Duplicate sysObjectID '.1.3.6.1.4.1.2011.2.169' in definitions for OSes: huawei-ias and huawei-ias! Duplicate sysObjectID '.1.3.6.1.4.1.24062.2.1' in definitions for OSes: korenix-jetnet and korenix-jetnet! Duplicate sysObjectID '.1.3.6.1.4.1.24062.2.2' in definitions for OSes: korenix-jetnet and korenix-jetnet! Duplicate sysObjectID '.1.3.6.1.4.1.24062.2.3' in definitions for OSes: korenix-jetnet and korenix-jetnet! Duplicate sysObjectID '.1.3.6.1.4.1.2636' in definitions for OSes: junos and junos! Duplicate sysObjectID '.1.3.6.1.4.1.4874' in definitions for OSes: junose and junose! Duplicate sysObjectID '.1.3.6.1.4.1.8239.1.2.9' in definitions for OSes: jwos and jwos! Duplicate sysObjectID '.1.3.6.1.4.1.674.3224.1' in definitions for OSes: screenos and screenos! Duplicate sysObjectID '.1.3.6.1.4.1.3224' in definitions for OSes: screenos and screenos! Duplicate sysObjectID '.1.3.6.1.4.1.12532' in definitions for OSes: juniperive and juniperive! Duplicate sysObjectID '.1.3.6.1.4.1.12356.15' in definitions for OSes: fortigate and fortigate! Duplicate sysObjectID '.1.3.6.1.4.1.12356.101.1' in definitions for OSes: fortigate and fortigate! Duplicate sysObjectID '.1.3.6.1.4.1.18070.2.2' in definitions for OSes: bti7000 and bti7000! Duplicate sysObjectID '.1.3.6.1.4.1.6141.1' in definitions for OSes: ciena and ciena! Duplicate sysObjectID '.1.3.6.1.4.1.14988' in definitions for OSes: routeros and routeros! Duplicate sysObjectID '.1.3.6.1.4.1.1991.1.1' in definitions for OSes: ironware and ironware! Duplicate sysObjectID '.1.3.6.1.4.1.1991.1.3' in definitions for OSes: ironware and ironware! Duplicate sysObjectID '.1.3.6.1.4.1.1991.1.5' in definitions for OSes: ironware and ironware! Duplicate sysObjectID '.1.3.6.1.4.1.1991.1.16' in definitions for OSes: ironware and ironware! Duplicate sysObjectID '.1.3.6.1.4.1.1991.1.6' in definitions for OSes: ironware-ap and ironware-ap! Duplicate sysObjectID '.1.3.6.1.4.1.1991.1.15' in definitions for OSes: ironware-ap and ironware-ap! Duplicate sysObjectID '.1.3.6.1.4.1.1588.2.2' in definitions for OSes: nos and nos! Duplicate sysObjectID '.1.3.6.1.4.1.5624.2.1.' in definitions for OSes: enterasys and enterasys! Duplicate sysObjectID '.1.3.6.1.4.1.5624.2.2.' in definitions for OSes: enterasys and enterasys! Duplicate sysObjectID '.1.3.6.1.4.1.4329.15.1.1' in definitions for OSes: enterasys-wl and enterasys-wl! Duplicate sysObjectID '.1.3.6.1.4.1.2334.' in definitions for OSes: packetshaper and packetshaper! Duplicate sysObjectID '.1.3.6.1.4.1.3417.2.11' in definitions for OSes: proxysg and proxysg! Duplicate sysObjectID '.1.3.6.1.4.1.3417.1.1' in definitions for OSes: proxysg and proxysg! Duplicate sysObjectID '.1.3.6.1.4.1.1795' in definitions for OSes: zhonedslam and zhonedslam! Duplicate sysObjectID '.1.3.6.1.4.1.22610.1.3' in definitions for OSes: a10-ax and a10-ax! Duplicate sysObjectID '.1.3.6.1.4.1.45.3' in definitions for OSes: avaya-ers and avaya-ers! Duplicate sysObjectID '.1.3.6.1.4.1.30065.1.3011.7124' in definitions for OSes: arista_eos and arista_eos! Duplicate sysObjectID '.1.3.6.1.4.1.6321' in definitions for OSes: calix and calix! Duplicate sysObjectID '.1.3.6.1.4.1.5951.1' in definitions for OSes: netscaler and netscaler! Duplicate sysObjectID '.1.3.6.1.4.1.3375.2.1.3.4.' in definitions for OSes: f5 and f5! Duplicate sysObjectID '.1.3.6.1.4.1.32050' in definitions for OSes: sitemonitor and sitemonitor! Duplicate sysObjectID '.1.3.6.1.4.1.161.19.250.256' in definitions for OSes: canopy and canopy! Duplicate sysObjectID '.1.3.6.1.4.1.11898.2.4.9' in definitions for OSes: proxim and proxim! Duplicate sysObjectID '.1.3.6.1.4.1.25053.3.1.4' in definitions for OSes: ruckus-zf and ruckus-zf! Duplicate sysObjectID '.1.3.6.1.4.1.25053.3.1.5' in definitions for OSes: ruckus-zd and ruckus-zd! Duplicate sysObjectID '.1.3.6.1.4.1.5454.1.60' in definitions for OSes: trango-apex and trango-apex! Duplicate sysObjectID '.1.3.6.1.4.1.6027.1.1' in definitions for OSes: ftos and ftos! Duplicate sysObjectID '.1.3.6.1.4.1.6027.1.2' in definitions for OSes: ftos and ftos! Duplicate sysObjectID '.1.3.6.1.4.1.6027.1.3' in definitions for OSes: ftos and ftos! Duplicate sysObjectID '.1.3.6.1.4.1.6027.1.4' in definitions for OSes: ftos and ftos! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3042' in definitions for OSes: dnos6 and dnos6! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3044' in definitions for OSes: dnos6 and dnos6! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3045' in definitions for OSes: dnos6 and dnos6! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3046' in definitions for OSes: dnos6 and dnos6! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3053' in definitions for OSes: dnos6 and dnos6! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3054' in definitions for OSes: dnos6 and dnos6! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3055' in definitions for OSes: dnos6 and dnos6! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3056' in definitions for OSes: dnos6 and dnos6! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3057' in definitions for OSes: dnos6 and dnos6! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3058' in definitions for OSes: dnos6 and dnos6! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3059' in definitions for OSes: dnos6 and dnos6! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3060' in definitions for OSes: dnos6 and dnos6! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3061' in definitions for OSes: dnos6 and dnos6! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3006' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3007' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3008' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3009' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3010' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3011' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3012' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3013' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3014' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3015' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3022' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3023' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3024' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3025' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3026' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3027' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3034' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3035' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3036' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3037' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3038' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3039' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3040' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3041' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3052' in definitions for OSes: powerconnect-fastpath and powerconnect-fastpath! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3000' in definitions for OSes: powerconnect-radlan and powerconnect-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3003' in definitions for OSes: powerconnect-radlan and powerconnect-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3004' in definitions for OSes: powerconnect-radlan and powerconnect-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3005' in definitions for OSes: powerconnect-radlan and powerconnect-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3016' in definitions for OSes: powerconnect-radlan and powerconnect-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3017' in definitions for OSes: powerconnect-radlan and powerconnect-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3018' in definitions for OSes: powerconnect-radlan and powerconnect-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3019' in definitions for OSes: powerconnect-radlan and powerconnect-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3020' in definitions for OSes: powerconnect-radlan and powerconnect-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3021' in definitions for OSes: powerconnect-radlan and powerconnect-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3028' in definitions for OSes: powerconnect-radlan and powerconnect-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3029' in definitions for OSes: powerconnect-radlan and powerconnect-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3030' in definitions for OSes: powerconnect-radlan and powerconnect-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3031' in definitions for OSes: powerconnect-radlan and powerconnect-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3032' in definitions for OSes: powerconnect-radlan and powerconnect-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.674.10895.3033' in definitions for OSes: powerconnect-radlan and powerconnect-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.674.10893.2.102' in definitions for OSes: powervault and powervault! Duplicate sysObjectID '.1.3.6.1.4.1.674.10892.2' in definitions for OSes: drac and drac! Duplicate sysObjectID '.1.3.6.1.4.1.674.10892.5' in definitions for OSes: drac and drac! Duplicate sysObjectID '.1.3.6.1.4.1.8741.1' in definitions for OSes: sonicwall and sonicwall! Duplicate sysObjectID '.1.3.6.1.4.1.8741.3' in definitions for OSes: sonicwall and sonicwall! Duplicate sysObjectID '.1.3.6.1.4.1.8741.4' in definitions for OSes: sonicwall and sonicwall! Duplicate sysObjectID '.1.3.6.1.4.1.8741.5' in definitions for OSes: sonicwall and sonicwall! Duplicate sysObjectID '.1.3.6.1.4.1.8741.7' in definitions for OSes: sonicwall and sonicwall! Duplicate sysObjectID '.1.3.6.1.4.1.8741.6' in definitions for OSes: sonicwall and sonicwall-ssl! Duplicate sysObjectID '.1.3.6.1.4.1.9694' in definitions for OSes: arbos and arbos! Duplicate sysObjectID '.1.3.6.1.4.1.15397.2' in definitions for OSes: plos and plos! Duplicate sysObjectID '.1.3.6.1.4.1.33049' in definitions for OSes: mlnx-os and mlnx-os! Duplicate sysObjectID '.1.3.6.1.4.1.304.2.2.' in definitions for OSes: netopia and netopia! Duplicate sysObjectID '.1.3.6.1.4.1.25651.1.2' in definitions for OSes: exalt and exalt! Duplicate sysObjectID '.1.3.6.1.4.1.12394.4.1.' in definitions for OSes: breeze and breeze! Duplicate sysObjectID '.1.3.6.1.4.1.12394.1.' in definitions for OSes: breezemax and breezemax! Duplicate sysObjectID '.1.3.6.1.4.1.171.10.37' in definitions for OSes: dlinkap and dlinkap! Duplicate sysObjectID '.1.3.6.1.4.1.171.10.33' in definitions for OSes: dlinkvoip and dlinkvoip! Duplicate sysObjectID '.1.3.6.1.4.1.171.11.10.1' in definitions for OSes: dlinkdpr and dlinkdpr! Duplicate sysObjectID '.1.3.6.1.4.1.171.10.' in definitions for OSes: dlink and dlink! Duplicate sysObjectID '.1.3.6.1.4.1.11863.1.1.2' in definitions for OSes: tplinkap and tplinkap! Duplicate sysObjectID '.1.3.6.1.4.1.11863' in definitions for OSes: tplink and tplink! Duplicate sysObjectID '.1.3.6.1.4.1.6050.5' in definitions for OSes: gamatronicups and gamatronicups! Duplicate sysObjectID '.1.3.6.1.4.1.534' in definitions for OSes: powerware and powerware! Duplicate sysObjectID '.1.3.6.1.4.1.2254.2.4' in definitions for OSes: deltaups and deltaups! Duplicate sysObjectID '.1.3.6.1.4.1.476.1.42' in definitions for OSes: liebert and liebert! Duplicate sysObjectID '.1.3.6.1.4.1.2606.7' in definitions for OSes: rittalcmc3 and rittalcmc3! Duplicate sysObjectID '.1.3.6.1.4.1.14125.100.1.3' in definitions for OSes: engenius and engenius! Duplicate sysObjectID '.1.3.6.1.4.1.14125.101.1.3' in definitions for OSes: engenius and engenius! Duplicate sysObjectID '.1.3.6.1.4.1.311.1.1.3' in definitions for OSes: windows and windows! Duplicate sysObjectID '.1.3.6.1.4.1.26543.1.7.4' in definitions for OSes: ibmnos and ibmnos! Duplicate sysObjectID '.1.3.6.1.4.1.26543.1.7.6' in definitions for OSes: ibmnos and ibmnos! Duplicate sysObjectID '.1.3.6.1.4.1.789.2.' in definitions for OSes: netapp and netapp! Duplicate sysObjectID '.1.3.6.1.4.1.4115.1.8.1' in definitions for OSes: arris-d5 and arris-d5! Duplicate sysObjectID '.1.3.6.1.4.1.4115.1.4.3' in definitions for OSes: arris-c3 and arris-c3! Duplicate sysObjectID '.1.3.6.1.4.1.11.2.3.7.11.' in definitions for OSes: procurve and procurve! Duplicate sysObjectID '.1.3.6.1.4.1.11.2.3.7.8.' in definitions for OSes: procurve and procurve! Duplicate sysObjectID '.1.3.6.1.4.1.11.2.14.11.7' in definitions for OSes: procurve and procurve! Duplicate sysObjectID '.1.3.6.1.4.1.11.2.14.11.6' in definitions for OSes: procurve-ap and procurve-ap! Duplicate sysObjectID '.1.3.6.1.4.1.11.2.3.7.11.33' in definitions for OSes: hpvc and hpvc! Duplicate sysObjectID '.1.3.6.1.4.1.11.5.7.5.1' in definitions for OSes: hpvc and hpvc! Duplicate sysObjectID '.1.3.6.1.4.1.11.2.3.2' in definitions for OSes: hpux and hpux! Duplicate sysObjectID '.1.3.6.1.4.1.11.2.51' in definitions for OSes: hpstorage and hpstorage! Duplicate sysObjectID '.1.3.6.1.4.1.11.5.7.1.2' in definitions for OSes: hpilo and hpilo! Duplicate sysObjectID '.1.3.6.1.4.1.11.5.7.3.2' in definitions for OSes: hpilo and hpilo! Duplicate sysObjectID '.1.3.6.1.4.1.232.9.4.10' in definitions for OSes: hpilo and hpilo! Duplicate sysObjectID '.1.3.6.1.4.1.43' in definitions for OSes: 3com and 3com! Duplicate sysObjectID '.1.3.6.1.4.1.25506.1.' in definitions for OSes: h3c and h3c! Duplicate sysObjectID '.1.3.6.1.4.1.25506' in definitions for OSes: hh3c and hh3c! Duplicate sysObjectID '.1.3.6.1.4.1.207.1.4.125' in definitions for OSes: allied-radlan and allied-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.207.1.4.126' in definitions for OSes: allied-radlan and allied-radlan! Duplicate sysObjectID '.1.3.6.1.4.1.5468.1' in definitions for OSes: actelis and actelis! Duplicate sysObjectID '.1.3.6.1.4.1.3181.10.3' in definitions for OSes: microsens and microsens! Duplicate sysObjectID '.1.3.6.1.4.1.705.1' in definitions for OSes: mgeups and mgeups! Duplicate sysObjectID '.1.3.6.1.4.1.705.2' in definitions for OSes: mgepdu and mgepdu! Duplicate sysObjectID '.1.3.6.1.4.1.318' in definitions for OSes: apc and apc! Duplicate sysObjectID '.1.3.6.1.4.1.29640.1.2.4' in definitions for OSes: oec and oec! Duplicate sysObjectID '.1.3.6.1.4.1.5528' in definitions for OSes: netbotz and netbotz! Duplicate sysObjectID '.1.3.6.1.4.1.18928.1' in definitions for OSes: areca and areca! Duplicate sysObjectID '.1.3.6.1.4.1.5491.6' in definitions for OSes: netmanplus and netmanplus! Duplicate sysObjectID '.1.3.6.1.4.1.2468.1.4.2.1' in definitions for OSes: ipoman and ipoman! Duplicate sysObjectID '.1.3.6.1.4.1.17373' in definitions for OSes: wxgoos and wxgoos! Duplicate sysObjectID '.1.3.6.1.4.1.674.10898.10.51' in definitions for OSes: dell-laser and dell-laser! Duplicate sysObjectID '.1.3.6.1.4.1.11.1' in definitions for OSes: jetdirect and jetdirect! Duplicate sysObjectID '.1.3.6.1.4.1.2001.1' in definitions for OSes: okilan and okilan! Duplicate sysObjectID '.1.3.6.1.4.1.1129.2.3.' in definitions for OSes: estudio and estudio! Duplicate sysObjectID '.1.3.6.1.4.1.1718.3' in definitions for OSes: sentry3 and sentry3! Duplicate sysObjectID '.1.3.6.1.4.1.28507.1' in definitions for OSes: gude-epc and gude-epc! Duplicate sysObjectID '.1.3.6.1.4.1.28507.6' in definitions for OSes: gude-epc and gude-epc! Duplicate sysObjectID '.1.3.6.1.4.1.28507.23' in definitions for OSes: gude-pdu and gude-pdu! Duplicate sysObjectID '.1.3.6.1.4.1.28507.27' in definitions for OSes: gude-pdu and gude-pdu! Duplicate sysObjectID '.1.3.6.1.4.1.28507.35' in definitions for OSes: gude-pdu and gude-pdu! Duplicate sysObjectID '.1.3.6.1.4.1.21239.5' in definitions for OSes: geist-climate and geist-climate! Duplicate sysObjectID '.1.3.6.1.4.1.13742' in definitions for OSes: raritan and raritan! Duplicate sysObjectID '.1.3.6.1.4.1.629' in definitions for OSes: mrvnbs and mrvnbs! Duplicate sysObjectID '.1.3.6.1.4.1.850' in definitions for OSes: poweralert and poweralert! Duplicate sysObjectID '.1.3.6.1.4.1.388' in definitions for OSes: symbol and symbol! Duplicate sysObjectID '.1.3.6.1.4.1.25461.2' in definitions for OSes: panos and panos! Duplicate sysObjectID '.1.3.6.1.4.1.6486.800.1.1.2.2' in definitions for OSes: arubaos and arubaos! Duplicate sysObjectID '.1.3.6.1.4.1.14823' in definitions for OSes: arubaos and arubaos! Duplicate sysObjectID '.1.3.6.1.4.1.14525.3.3' in definitions for OSes: trapeze and trapeze! Duplicate sysObjectID '.1.3.6.1.4.1.14525.3.1' in definitions for OSes: trapeze and trapeze! Duplicate sysObjectID '.1.3.6.1.4.1.2356.11' in definitions for OSes: lcos and lcos! Duplicate sysObjectID '.1.3.6.1.4.1.2356.600.3.55' in definitions for OSes: lancom-l54-dual and lancom-l54-dual! Duplicate sysObjectID '.1.3.6.1.4.1.2356.600.6.310' in definitions for OSes: lancom-l310 and lancom-l310! Duplicate sysObjectID '.1.3.6.1.4.1.2356.600.4.54' in definitions for OSes: lancom-c54g and lancom-c54g! Duplicate sysObjectID '.1.3.6.1.4.1.7367' in definitions for OSes: draytek and draytek! Duplicate sysObjectID '.1.3.6.1.4.1.10704' in definitions for OSes: barracudangfw and barracudangfw! Duplicate sysObjectID '.1.3.6.1.4.1.5003' in definitions for OSes: audiocodes and audiocodes! Duplicate sysObjectID '.1.3.6.1.4.1.5329' in definitions for OSes: shoretelos and shoretelos! Duplicate sysObjectID '.1.3.6.1.4.1.1027.1.2.3' in definitions for OSes: mcd and mcd! Duplicate sysObjectID '.1.3.6.1.4.1.9148.1' in definitions for OSes: acme and acme! Duplicate sysObjectID '.1.3.6.1.4.1.21796.3.3' in definitions for OSes: poseidon and poseidon! Duplicate sysObjectID '.1.3.6.1.4.1.21796.4.1' in definitions for OSes: hwg-ste and hwg-ste! Duplicate sysObjectID '.1.3.6.1.4.1.21296' in definitions for OSes: iqnos and iqnos! Duplicate sysObjectID '.1.3.6.1.4.1.89.1.1.62.16' in definitions for OSes: radware and radware! Duplicate sysObjectID '.1.3.6.1.4.1.35251.2.3' in definitions for OSes: wipg and wipg! Duplicate sysObjectID '.1.3.6.1.4.1.1768.100.4.' in definitions for OSes: smartware and smartware! Duplicate sysObjectID '.1.3.6.1.4.1.17163.1.1' in definitions for OSes: steelhead and steelhead! Duplicate sysObjectID '.1.3.6.1.4.1.25049.1.' in definitions for OSes: opengear and opengear! Duplicate sysObjectID '.1.3.6.1.4.1.25049.16.' in definitions for OSes: opengear and opengear! Duplicate sysObjectID '.1.3.6.1.4.1.30826.1' in definitions for OSes: smartos and smartos! Duplicate sysObjectID '.1.3.6.1.4.1.38191.6.2.2' in definitions for OSes: lg-printer and lg! Duplicate sysObjectID '.1.3.6.1.4.1.1248.1.1.2' in definitions for OSes: epson-printer and epson! Duplicate sysObjectID '.1.3.6.1.4.1.1248.1.2.1' in definitions for OSes: epson-printer and epson! Duplicate sysObjectID '.1.3.6.1.4.1.253.8.62.1.' in definitions for OSes: xerox-printer and xerox! Duplicate sysObjectID '.1.3.6.1.4.1.297.1.11.93.1.' in definitions for OSes: fuji-xerox-printer and fuji-xerox! Duplicate sysObjectID '.1.3.6.1.4.1.1602.4.2' in definitions for OSes: canon-printer and canon! Duplicate sysObjectID '.1.3.6.1.4.1.1602.4.7' in definitions for OSes: canon-printer and canon! Duplicate sysObjectID '.1.3.6.1.4.1.2385.3.1.' in definitions for OSes: sharp-printer and sharp! Duplicate sysObjectID '.1.3.6.1.4.1.3369.1.1.2.40' in definitions for OSes: sharp-printer and sharp! Duplicate sysObjectID '.1.3.6.1.4.1.2435.2.3.9.1' in definitions for OSes: brother-printer and brother! Duplicate sysObjectID '.1.3.6.1.4.1.18334.1.1.1.2.1' in definitions for OSes: konica-printer and konica! Duplicate sysObjectID '.1.3.6.1.4.1.2590.1.1.1.2.1' in definitions for OSes: konica-printer and konica! Duplicate sysObjectID '.1.3.6.1.4.1.258.406.2' in definitions for OSes: panasonic-printer and panasonic! Duplicate sysObjectID '.1.3.6.1.4.1.258.406.3' in definitions for OSes: panasonic-printer and panasonic! Does anybody know how to get rid of this? Regards, Pau

2 1

RANCID integration in Observium on a RHEL like OS
by Shkelzen Rugovac 04 Mar '16

04 Mar '16

Hi, I'm trying to integrate RANCID in an Observium server installed on top of a Scientific Linux 6.6. So far I found this documentation for ubuntu: http://www.observium.org/docs/rancid/ I somehow "replaced by" what was necessary such as apt-get by yum and www-data by apache. Though I'm not able to see the "Config" tab in my observium web pages. Am I missing some specific steps for RHEL or it is just not meant to work under RHEL? Many thanks in advance! Cheers, Shkelzen

2 1

SVN Up problem
by Svensson Fredrik A 03 Mar '16

03 Mar '16

I just tried to do an upgrade, it failed on this: A mibs/pbn/NMS-TC.MIB svn: Failed to add file 'mibs/NS-ROOT-MIB': an unversioned file of the same name already exists What can I do about this? Regards Fredrik

2 2

How to add a custom alert or web site health check in Observium
by David Gietka - NOAA Federal 03 Mar '16

03 Mar '16

Greetings, My office recently purchased Observium and we really enjoy the server stats on CPU, memory and storage. It appears that I can set up other health checks as well but I was not able to find any examples in the HTML help files. What I would like to do is write a simple shell script that returns one of three values: information, warning, and critical and have Observium act on that value with an alert (on warnings and critical error codes). Does anyone have a brief example they can share? Any assistance would be greatly appreciated. Thanks a lot. Regards, David Gietka NGS Webmaster

1 0

Problem with rrdtool graphs
by Idriss SOIDIKI 02 Mar '16

02 Mar '16

Hello, I installed Observium with the new version and I meet a problem with the creation of the graphs. Nevertheless when I launch the poller he seems to work correctly. Did you meet similar problems? Cordially --

2 2

IPMI fan speed as percent
by Louis Bailleul 02 Mar '16

02 Mar '16

Hi all, I have some devices for which the fan speed reported over IPMI is in percent. As the current ipmi_unit is “RPM” they were ignored. Thinking that it could be an easy tweak I just added a definition for percent in includes/definitions/sensors.inc.php $config['ipmi_unit']['percent'] = 'fanspeed'; This makes the detection and polling work but the graphs are messed up as they expect RPMs (kind of make sense eh). I believe that the fan sensors code is not designed to accommodate different units. So I come for advice on how to tackle this one. Is there a sensors that already work with percent ? Below is the output of the ipmi sensors. Yes it shit, and you need to thanks HP for that (especially things like the temperature limit for CPU or reporting the nominal Wattage of a PSU instead of the power consumption …) UID Light | 0x0 | discrete | 0x0180| na | na | na | na | na | na Sys. Health LED | 0x0 | discrete | 0x0180| na | na | na | na | na | na 01-Front Ambient | 24.000 | degrees C | ok | na | na | na | na | 42.000 | 46.000 02-CPU 1 | 59.000 | degrees C | ok | na | na | na | na | -116.000 | na 03-CPU 2 | 53.000 | degrees C | ok | na | na | na | na | -116.000 | na 04-P1 DIMM 1-4 | 64.000 | degrees C | ok | na | na | na | na | 87.000 | na 05-P1 DIMM 5-8 | 69.000 | degrees C | ok | na | na | na | na | 87.000 | na 06-P2 DIMM 1-4 | 58.000 | degrees C | ok | na | na | na | na | 87.000 | na 07-P2 DIMM 5-8 | 57.000 | degrees C | ok | na | na | na | na | 87.000 | na 08-HD Max | na | | na | na | na | na | na | 60.000 | na 09-HD Zone | 24.000 | degrees C | ok | na | na | na | na | 80.000 | na 10-Chipset | 81.000 | degrees C | ok | na | na | na | na | 105.000 | na 11-VR P1 | 80.000 | degrees C | ok | na | na | na | na | 115.000 | 120.000 12-VR P2 | 55.000 | degrees C | ok | na | na | na | na | 115.000 | 120.000 13-VR P1 MEM1 | 66.000 | degrees C | ok | na | na | na | na | 115.000 | 120.000 14-VR P1 MEM2 | 71.000 | degrees C | ok | na | na | na | na | 115.000 | 120.000 15-VR P2 Mem1 | 43.000 | degrees C | ok | na | na | na | na | 115.000 | 120.000 16-VR P2 Mem2 | 69.000 | degrees C | ok | na | na | na | na | 115.000 | 120.000 17-LOM | na | | na | na | na | na | na | 100.000 | na 18-PCI 1 | na | | na | na | na | na | na | 100.000 | na 19-PCI 2 | na | | na | na | na | na | na | 100.000 | na 20-PCI 3 | na | | na | na | na | na | na | 100.000 | na 21-LOM Card | na | | na | na | na | na | na | 100.000 | na 22-PCI 1 Zone | 59.000 | degrees C | ok | na | na | na | na | 70.000 | 75.000 23-LOM Zone | 72.000 | degrees C | ok | na | na | na | na | 75.000 | 80.000 24-Battery Zone | 65.000 | degrees C | ok | na | na | na | na | 75.000 | 80.000 25-PSU Intake | 40.000 | degrees C | ok | na | na | na | na | 80.000 | 85.000 26-Sys Exhaust | 64.000 | degrees C | ok | na | na | na | na | 80.000 | 85.000 Fan 1 | 67.816 | percent | ok | na | na | na | na | na | na Fan 2 | 67.816 | percent | ok | na | na | na | na | na | na Power Supply 1 | 1275 | Watts | ok | na | na | na | na | na | na Power Supply 2 | 1275 | Watts | ok | na | na | na | na | na | na Memory | 0x0 | discrete | 0x4080| na | na | na | na | na | na Best regards, Louis [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/PGS_LOGO_RGB_42x53px.jpg]<http://www.pgs.com> Louis Bailleul Computer Systems Engineer Imaging & Engineering | Imaging Telephone: +44 1932 376000 Direct: +44 1932 376842 VOIP: 74416842 Mobile: +44 7786 525307 Email: louis.bailleul(a)pgs.com<mailto:Louis.Bailleul@pgs.com> A Clearer Image | www.pgs.com<http://www.pgs.com> [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/150731-ColourWave-660x14…] Address: 4 The Heights, Brooklands, Weybridge, Surrey, KT13 0NY, United Kingdom This e-mail, including any attachments and response string, may contain proprietary information which is confidential and may be legally privileged. It is for the intended recipient only. If you are not the intended recipient or transmission error has misdirected this e-mail, please notify the author by return e-mail and delete this message and any attachment immediately. If you are not the intended recipient you must not use, disclose, distribute, forward, copy, print or rely on this e-mail in any way except as permitted by the author.

2 6

Problem with rrdtool graphs
by Idriss SOIDIKI 01 Mar '16

01 Mar '16

Hello, i run commands observium]# ./discovery.php -h all observium]# ./poller.php -h all I did not go up the information and my graphs are not displayed. What I can do ? --

2 1

big db.log
by Jose Colin 29 Feb '16

29 Feb '16

Hello Guys Recently i report that i had a lot of php processes running on the server and this consume the whole resources of the server so i checked the logs and notice that i have a 3.5 GB db.log file and in there is the next info: t row 1), Query: INSERT INTO `sensors-state` (`sensor_id`,`sensor_value`,`sensor_event`,`sensor_status`,`sensor_last_change`,`sensor_polled`) VALUES ('278','70','ok','','','1456155044') [2016/02/22 15:30:45 +0000] poller.php(9150): Failed dbQuery (#1364 - Field 'ifInUcastPkts_delta' doesn't have a default value), Query: INSERT INTO `ports-state` (`poll_time`,`poll_period`,`ifInOctets`,`ifOutOctets`,`ifInErrors`,`ifOutErrors`,`ifInUcastPkts`,`ifOutUcastPkts`,`ifInOctets_perc`,`ifOutOctets_perc`,`ifOctets_rate`,`ifUcastPkts_rate`,`ifErrors_rate`,`port_id`) VALUES ('1456155045','1456155045','15446864133','15446864133','0','0','66588490','66588490','0','0','0','0','0','524') [2016/02/22 15:30:45 +0000] poller.php(9150): Failed dbQuery (#1364 - Field 'ifInUcastPkts_delta' doesn't have a default value), Query: INSERT INTO `ports-state` (`poll_time`,`poll_period`,`ifInOctets`,`ifOutOctets`,`ifInErrors`,`ifOutErrors`,`ifInUcastPkts`,`ifOutUcastPkts`,`ifInOctets_perc`,`ifOutOctets_perc`,`ifOctets_rate`,`ifUcastPkts_rate`,`ifErrors_rate`,`port_id`) VALUES ('1456155045','1456155045','64446811076','175584922424','0','0','339891989','309672599','0','0','0','0','0','525') [2016/02/22 15:30:46 +0000] poller.php(6813): Failed dbQuery (#1364 - Field 'mempool_polled' doesn't have a default value), Query: INSERT INTO `mempools-state` (`mempool_id`) VALUES ('91') [2016/02/22 15:30:46 +0000] poller.php(6813): Failed dbQuery (#1364 - Field 'mempool_polled' doesn't have a default value), Query: INSERT INTO `mempools-state` (`mempool_id`) VALUES ('92') [2016/02/22 15:30:46 +0000] poller.php(6813): Failed dbQuery (#1364 - Field 'mempool_polled' doesn't have a default value), Query: this is the reason why i have many poller pids on the server. please can you guide to fix this issue?. thanks in advice. José.

2 2

Device showing interface error cleared long ago
by KA PDE 29 Feb '16

29 Feb '16

Hi, I have a device which is always showing an interface error which was previous to the Observium installation. I cleared the error on the switch and it did not reproduce. However Observium is showing it every day I check. I've tried to delete the device and adding it back and it show the error again. After upgrading to the latests CE it is the same. Maybe this has persisted in the DB, I don't know... Does anyone has any hint for this behaviour? Thanks in advance and best regards, Pau

1 0

Port Customer/Transit/peering
by chott＠praha1.net 28 Feb '16

28 Feb '16

Hello team, we are try set Description of port for recognize usage of port like this notes http://observium.org/w/Interface_Description_Parsing We have lot of port description starting "cust" and "transit" but Observium every time after go to Ports/Customers write "None found." Thank you for help Tom [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 733 123 135 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

5 11

DOM optic sensor graphs always rounded to 0W
by Sandy Breeze 26 Feb '16

26 Feb '16

Hi, Currently running: 0.16.1.7533 (26th January 2016) We’ve noticed the DOM optic power sensor data to be graphed at 0W all the time. Noticing the ‘value’ figure is correct on the optic’s power status page, we subsequently found all data in the RRD to be correct. eg:  <row><v>6.1840000000e-04</v></row>  <row><v>6.1300000000e-04</v></row>  <row><v>6.1435000000e-04</v></row> It just seems the rrdtool graph function is not rendering this sensor data with anything useful. The graph is being generated with something like this: rrdtool graph /tmp/FLjPO7rtfRJQOfGn.png -Y --lower-limit 0 --alt-autoscale-max --start 1456347228 --end 1456433628 --width 1152 --height 300 -c BACK#EEEEEE00 -c SHADEA#EEEEEE00 -c SHADEB#EEEEEE00 -c FONT#000000 -c CANVAS#FFFFFF00 -c GRID#a5a5a5 -c MGRID#FF9999 -c FRAME#5e5e5e -c ARROW#5e5e5e -R normal --font LEGEND:8:'DroidSansMono,DejaVuSansMono' --font AXIS:7:'DroidSansMono,DejaVuSansMono' --font-render-mode normal -E -A COMMENT:' Last Max\n' DEF:sensor=/srv/www/iss/observium/rrd/t40-ar14/sensor-power-cisco-entity-sensor-58513400.rrd:sensor:AVERAGE DEF:sensor_max=/srv/www/iss/observium/rrd/t40-ar14/sensor-power-cisco-entity-sensor-58513400.rrd:sensor:MAX DEF:sensor_min=/srv/www/iss/observium/rrd/t40-ar14/sensor-power-cisco-entity-sensor-58513400.rrd:sensor:MIN AREA:sensor_max#c5c5c5 AREA:sensor_min#ffffffff LINE1.5:sensor#cc0000:'Transceiver Rx Power -' GPRINT:sensor:LAST:%6.2lfW GPRINT:sensor:MAX:%6.2lfW\\l HRULE:0.0009585#999999::dashes Seeing the data collected is in the order of 10^-4 d.p. small, how can we stop this being rounded to 0 all the time on a the graph? I understand completely this is rrdtool not automatically choosing a very good scale for you, but is there any way to detect these low values and fix them up for the graphs by order of 1000 say? Cheers Sandy

4 6

Subscription Graphs Issue/API
by Josh Hopper 26 Feb '16

26 Feb '16

Well, my graphs do not work. Trying to figure out where I went wrong so I do not have to reinstall from scratch. Any assistance, is highly appreciated. I see this: [image: Inline image 1] Its the same for every device. I'm on Observium 0.16.2.7629 (stable). I thought it might be my config.php so I posted it below. root@svr-observium:/opt/observium# cat config.php <?php ## Check http://www.observium.org/docs/config_options/ for documentation of possible settings // Database config --- This MUST be configured $config['db_extension'] = 'mysqli'; $config['db_host'] = 'localhost'; $config['db_user'] = 'observium'; $config['db_pass'] = 'XXXXXXXX'; $config['db_name'] = 'observium'; // Base directory #$config['install_dir'] = "/opt/observium"; // Default community list to use when adding/discovering $config['snmp']['community'] = array("public"); // Authentication Model $config['auth_mechanism'] = "mysql"; // default, other options: ldap, http-auth, please see documentation for config help // Enable alerter (not available in CE) // $config['poller-wrapper']['alerter'] = TRUE; // Set up a default alerter (email to a single address) $config['email']['default'] = "user@your-domain"; $config['email']['from'] = "Observium <observium@your-domain>"; $config['email']['default_only'] = TRUE; // End config.php ?>

2 2

Creating group with ifInOctets_perc
by Louis Bailleul 26 Feb '16

26 Feb '16

Hi, Seems that I can’t create a group that uses ifInOctets_perc for its entity match ? Is this because of a reason/bug or I am doing it stupidly ? My alert checker is working fine and I was able to create a group with ifOperStatus. They are both in the Mettrics category so I expected them to work the same way. [cid:image001.png@01D170AF.C90F8400] [cid:image002.png@01D170AF.C90F8400] Best regards, Louis [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/PGS_LOGO_RGB_42x53px.jpg]<http://www.pgs.com> Louis Bailleul Computer Systems Engineer Imaging & Engineering | Imaging Telephone: +44 1932 376000 Direct: +44 1932 376842 VOIP: 74416842 Mobile: +44 7786 525307 Email: louis.bailleul(a)pgs.com<mailto:Louis.Bailleul@pgs.com> A Clearer Image | www.pgs.com<http://www.pgs.com> [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/150731-ColourWave-660x14…] Address: 4 The Heights, Brooklands, Weybridge, Surrey, KT13 0NY, United Kingdom This e-mail, including any attachments and response string, may contain proprietary information which is confidential and may be legally privileged. It is for the intended recipient only. If you are not the intended recipient or transmission error has misdirected this e-mail, please notify the author by return e-mail and delete this message and any attachment immediately. If you are not the intended recipient you must not use, disclose, distribute, forward, copy, print or rely on this e-mail in any way except as permitted by the author.

2 2

Panasas support
by Louis Bailleul 26 Feb '16

26 Feb '16

Hi, I have a few Panasas devices that (not surprisingly) Observium doesn’t handle very well. It basically only get the uptime out of it. The devices are similar to this : http://www.panasas.com/products/activestor-16-18 I have attached debug discovery, poller and snmpwalk of the top tree and enterprise parts. I also have attached the mibs from the device (retrieved from the device itself) and a logo (retrieved from http://www.panasas.com/news/press-room ) It looks like there is very little in the standard places and every interesting thing has been shoved into the enterprise tree. Do you think it is possible to add support for these devices ? Best regards, Louis [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/PGS_LOGO_RGB_42x53px.jpg]<http://www.pgs.com> Louis Bailleul Computer Systems Engineer Imaging & Engineering | Imaging Telephone: +44 1932 376000 Direct: +44 1932 376842 VOIP: 74416842 Mobile: +44 7786 525307 Email: louis.bailleul(a)pgs.com<mailto:Louis.Bailleul@pgs.com> A Clearer Image | www.pgs.com<http://www.pgs.com> [http://www.pgs.com/mediaFiles/Exclaimer%20graphics/150731-ColourWave-660x14…] Address: 4 The Heights, Brooklands, Weybridge, Surrey, KT13 0NY, United Kingdom This e-mail, including any attachments and response string, may contain proprietary information which is confidential and may be legally privileged. It is for the intended recipient only. If you are not the intended recipient or transmission error has misdirected this e-mail, please notify the author by return e-mail and delete this message and any attachment immediately. If you are not the intended recipient you must not use, disclose, distribute, forward, copy, print or rely on this e-mail in any way except as permitted by the author.

2 2

observium-rancid mail configuration
by Sathish.I 26 Feb '16

26 Feb '16

Hi All, I am very new to observium, I have successfully integrated rancid with Observium, taking backup ups. However, I am unable to receive the mail when backup was tacken. Can anyone share the config template to integrate rancid and mail configuration for rancid. Thanks in advance. Regards, Sathish Ippani NSE Team CtrlS is India's First and Asia's largest Tier 4 Datacenter operating across India, USA, and UAE Follow us on <https://www.linkedin.com/company/ctrls-datacenters-ltd> Description: Description: Description: Description: Description: Description: http://www.ctrls.com/email-signature/images/linkedin.jpg <https://twitter.com/CtrlSDC> Description: Description: Description: Description: Description: Description: http://www.ctrls.com/email-signature/images/twitter.jpg <https://www.facebook.com/CtrlSDatacenters> Description: Description: Description: Description: Description: Description: http://www.ctrls.com/email-signature/images/facebook.jpg Description: Description: Description: Description: Description: Description: http://www.ctrls.com/email-signature/images/devider.jpg Description: Description: Description: Description: Description: Description: Ctrls Description: Description: Description: Description: Description: Description: http://www.ctrls.com/email-signature/images/devider.jpg CtrlS Datacenters Ltd 16,Software Units Layout, Madapur (HitechCity), Hyderabad 500081, Telangana, India Mob: +91 9515600544 Tel : +91 (40) 420430700 Fax : +91 (40) 23116055

2 1

Filtering ports/devices
by Michael 26 Feb '16

26 Feb '16

Does anybody know of a syntax that will allow multiple matches when filtering on device hostnames? I'm specifically on the all ports page. We've smashed two separate networks together and there are different naming conventions in use. When I want to look at only one side of the network, it would be easy if I could match all devices starting with p, s or m-. The hostname field doesn't seem to accept regex, nor does it accept "or" statements. Is there a solution to this? Cheers, Michael

1 0

Alerts based on RRD averages?
by Stephen Fulton 25 Feb '16

25 Feb '16

Hi all, I'm curious if it is possible to create an alert that considers an RRD average? For example, if I want to generate an alert that looks at the average utilization of a port over a 24 hour period, and if the average bit rate or percentage is greater than X, send an alert? I have been working with alerts that trigger based on a percentage, but if the port drops below that mark for even a short period of time (minutes, perhaps even an hour or two), the clock resets. That's proving troublesome. Any suggestions? Thanks, -- Stephen

2 1

HP mfp m527 and mfp m577 printers
by Richard Kuhns 25 Feb '16

25 Feb '16

Greetings, We've just purchased both of these printers. I've started monitoring them with Observium, but all I see under Inventory are the printer itself (hrDevicePrinter) and the printer's hard disk (hrDeviceDiskStorage). Have I missed doing something, or are these printers just not supported? This is by no means urgent. I've never tried to monitor a printer before and I just wanted to see what Observium told me about them. Thanks, - Richard -- Richard Kuhns <rjk(a)wintek.com> Wintek Corporation 427 N 6th Street Lafayette, IN 47901-2211 Main: 765-742-8428 Direct: 765-269-8541

3 3

non-continuous graphs
by Sathish.I 25 Feb '16

25 Feb '16

Hello All, WE have newly installed Observium, we are seeing the graph's in non-continuous pattern as below. Can you guys please check and suggest a solution. Regards, sathish

1 0

Getting "DB schema not installed, first install it." After CE upgrade
by KA PDE 25 Feb '16

25 Feb '16

Hi everyone, Today I've upgraded a CE Observium from 0.15.6 to 0.16.1 and it broke. It only shows DB schema not installed. I've noticed some errors in update-errors.log [2016/02/25 07:37:08 +0000] discovery.php(29504): Error: (1046) No database selected [2016/02/25 07:37:08 +0000] discovery.php(29504): Query: ALTER TABLE `bgpPeers` ADD INDEX `bgp_cache` (`bgpPeer_id`, `device_id`, `bgpPeerState`, `bgpPeerAdminStatus`, `bgpPeerRemoteAs`); [2016/02/25 07:37:08 +0000] discovery.php(29504): Error: (1046) No database selected [2016/02/25 07:37:08 +0000] discovery.php(29504): Query: ALTER TABLE `ospf_instances` ADD INDEX `ospf_cache` (`device_id`, `ospf_instance_id`, `ospfAdminStat`); [2016/02/25 07:37:08 +0000] discovery.php(29504): Error: (1046) No database selected [2016/02/25 07:37:08 +0000] discovery.php(29504): Query: ALTER TABLE `vrfs` ADD INDEX `vrf_cache` (`vrf_id`, `device_id`, `mplsVpnVrfRouteDistinguisher`); [2016/02/25 07:37:08 +0000] discovery.php(29504): Error: (1046) No database selected [2016/02/25 07:37:08 +0000] discovery.php(29504): ====== Schema update 264 -> 265 ============== [2016/02/25 07:37:08 +0000] discovery.php(29504): Query: ALTER TABLE `alerts_maint` ADD INDEX `maint_cache` (`maint_start`, `maint_end`); [2016/02/25 07:37:08 +0000] discovery.php(29504): Error: (1046) No database selected [2016/02/25 07:37:08 +0000] discovery.php(29504): ====== Schema update 265 -> 266 ============== [2016/02/25 07:37:08 +0000] discovery.php(29504): Query: ALTER TABLE `snmp_errors` DROP INDEX `error_index`; [2016/02/25 07:37:08 +0000] discovery.php(29504): Error: (1046) No database selected [2016/02/25 07:37:08 +0000] discovery.php(29504): Query: ALTER TABLE `snmp_errors` ADD UNIQUE `error_index` (`device_id`, `error_code`, `snmp_cmd`, `mib`(50), `oid`(100)); [2016/02/25 07:37:08 +0000] discovery.php(29504): Error: (1046) No database selected The strange thing is that I recently upgraded another server with no issues. The only difference is that I added the following config line later as there was an alert in the GUI (and now I'm adding it from start): $config['db_extension'] = 'mysqli'; Any hint will be greatly appreciated. Best regards, Pau

2 2

hey thanks for "Reset Limits" [SEC=UNCLASSIFIED]
by Peter.Hine＠familycourt.gov.au 25 Feb '16

25 Feb '16

just found it thanks VM Peter Hine Senior Technical Support Engineer (Servers) FCoA ITS peter.hine(a)familycourt.gov.au ********************************************************************** The information contained in this e-mail (including any attachments) is for the exclusive use of the addressee. If you are not the intended recipient please notify the sender immediately and delete this e-mail. It is noted that legal privilege is not waived because you have read this e-mail. **********************************************************************

1 0

Possible bug
by Nagy Attila 24 Feb '16

24 Feb '16

Hi all, We are using a customized location rewrite function to split the SNMP location of devices into a human readable and a machine understandable format. We are using the community edition, and on updating to the recent version we were faced with thIS error message: PHP Fatal error: Cannot redeclare custom_rewrite_location() (previously declared in /opt/observium/config.php:87) in /opt/observium/config.php on line 102 This is a common error when a php file is included/required more than once, so I made a workaround by renaming config.php to config.user.php and using require_once() in the original config.php to load these directives (it needs absolute path otherways it cannot find the file). Shouldn't require_once/include_once be used in all the places where referencing config.php? Br, Tylla,

5 10

Observium syslog year -0001
by Jason Vanlandingham 24 Feb '16

24 Feb '16

Lately (Since last CE update, I think) I've been seeing syslog messages for my Cisco router with a date stamp of "-0001-11-30" with text reading just something like "1:1". A little searching reveals that there was a mail list post from July 2014 for the same thing happening with Netgear equipment, but the only way I could see that post was through Google's cached result, and I can't find any replies. Is anyone else getting this? Known issue, perhaps?

1 0

Cisco SB SFP DOM/DDM monitoring
by chott＠praha1.net 24 Feb '16

24 Feb '16

Hello team, today i find OID for SFP monitoring in Cisco SB in this case there is OID and CLI info from CISCO SG300-10 switch and SFP in slot GI9 with DOM support can you add to Observium ? like Catalyst switches? Only in CLI there is mW for Power in SNMPwalk there is dBm but same value dBm is right value for DOM monitoring iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.5 = INTEGER: 47 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.6 = INTEGER: 3211700 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.7 = INTEGER: 6289 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.8 = INTEGER: -6809 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.9 = INTEGER: -9626 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.10 = INTEGER: 0 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.11 = INTEGER: 0 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.12 = INTEGER: 0 Port Temp Voltage Current Output Input LOS [C] [Volt] [mA] Power Power [mWatt] [mWatt] ----------- ------ ------- ------- ------- ------- --- gi1 Copper gi2 Copper gi3 Copper gi4 Copper gi5 Copper gi6 Copper gi7 Copper gi8 Copper gi9 47 3.20 6.28 0.20 0.10 No gi10 N/A N/A N/A N/A N/A N/A Temp - Internally measured transceiver temperature Voltage - Internally measured supply voltage Current - Measured TX bias current Output Power - Measured TX output power in milliWatts Input Power - Measured RX received power in milliWatts LOS - Loss of signal N/A - Not Available, N/S - Not Supported, W - Warning, E - Error Tom [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 733 123 135 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

4 16

Rancid-Mail configuration
by Sathish.I 23 Feb '16

23 Feb '16

Hi All, I am very new to observium, I have successfully integrated rancid with Observium, taking backup ups. However, I am unable to receive the mail when config difference. Can any share the config template to integrate rancid and mail configuration for configuration changes. Thanks in advance. Regards, sathish

2 1

Correct version not shon after device(raouter) upgradation
by Rakesh Vyas 23 Feb '16

23 Feb '16

Hi, Observium is not showing correct version after router version up gradation. We have to delete and add that device again. Any process to get auto update. Best regards Rakesh Vyas Lead, Network Data Operations Division Network, CORPORATE CENTER Sistema Shyam Teleservices Limited MTS Tower1 Building No. 334, Udyog Vihar Phase IV,Gurgaon MTS +91 913 600 1375 Direct Email: Rakesh.Vyas(a)MTSIndia.in [cid:image001.jpg@01D16E23.17796F00]<http://www.mtsindia.in/> ________________________________ This E-Mail may contain Confidential and/or legally privileged Information and is meant for the intended recipient(s) only. If you have received this e-mail in error and are not the intended recipient/s, Kindly notify the sender and then delete this e-mail immediately from your system. You are also hereby notified that any use, any form of reproduction, dissemination, copying, disclosure, modification, distribution and/or publication of this e-mail, its contents or its attachment/s other than by its intended recipient/s is strictly prohibited and may be unlawful. Internet Communications cannot be guaranteed to be secure or error-free as information could be delayed, intercepted, corrupted, lost, or contain viruses. Sistema Shyam Teleservices Limited does not accept any liability for any errors, omissions, viruses or computer problems experienced by any recipient as a result of this e-mail.

2 1