- observium - lists.observium.org

Brocade Virtual Fabrics
by Ole Hansen 11 Feb '16

11 Feb '16

Hello, We’re using Brocade FC-switches with virtual fabrics. According to http://community.brocade.com/t5/Fibre-Channel-SAN/Looking-for-monitor-virtu… <http://community.brocade.com/t5/Fibre-Channel-SAN/Looking-for-monitor-virtu…> using snmpv3 and “context” I should be able to monitor ports in each context. Is this supported in Observium? Setting a specific context for snmpv3. As far as I know, it’s only possible to add a device once, if it has the same IP - how would i monitor the different contexts? — Ole Hansen

1 0

Cisco 6500 PSU with 1xAC fault
by Robert Williams 11 Feb '16

11 Feb '16

Hi, Does anyone know if there is a way to detect a failed AC input on a 6500 PSU when the PSU has dual inputs? I've just noticed that when one of the inputs is removed from each PSU there is no indication in Observium that anything is wrong at all. At the CLI you can see the status changes to AC LOW. For example, below I have removed one of the AC inputs from power supply No.2 #show environment status power-supply 1: power-supply 1 fan-fail: OK power-supply 1 power-input: AC high power-supply 1 power-output-mode: high power-supply 1 incompatible with fan: OK power-supply 1 power-output-fail: OK power-supply 2: power-supply 2 fan-fail: OK power-supply 2 power-input: AC low power-supply 2 power-output-mode: low power-supply 2 incompatible with fan: OK power-supply 2 power-output-fail: OK You also get a reduction in the 'capacity' of the PSU, as shown below: #show power Power-Capacity PS-Fan Output Oper PS Type Watts A @42V Status Status State ---- ------------------ ------- ------ ------ ------ ----- 1 WS-CAC-6000W 5771.64 137.42 OK OK on 2 WS-CAC-6000W 2671.20 63.60 OK OK on Nothing that I can see in Observium shows any of this information so there is nothing for me to Threshold on. Anyone hit this already and come up with a way of doing it? Or is there an OID for the AC Low/High status which can perhaps be added for Observium to see? Cheers! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

3 3

Port names for D-Link 'smart' switches
by Dirk-Willem van Gulik 10 Feb '16

10 Feb '16

Minor feature suggestion for the D-LINK switches. As, iin Observium, one cannot change the port description, you need to rely on being able to set those in the switches (e.g. when you want to use Peering, Transit and other trickery). On D-LINK ifName contains a generated Slot0/1 … Slot0/28, etc. These cannot be changed. However at .1.3.6.1.4.1.171.10.76.21.1.1.16.1.2 (DGS series) .1.3.6.1.4.1.171.10.75.15.2.1.14.1.3 (DES series) and so on - there is a always a table with a sysPortDescString : $ snmptranslate -Tp -M+`pwd`:d-link -m+DES-1210-28MEbx .1.3.6.1.4.1.171.10.75.15.2.1.14.1.3 +-- -RW- String sysPortDescString(3) Textual Convention: DisplayString Size: 0..32 I.e. in the private enterprise MIBs for the various DGS/DES switches there is a sysPortDescString that can be set by the user through the file/SDN or web interfaces. Example of the output below. May be useful to pick up. Dw. snmpwalk -M+/usr/local/www/observium/mibs/d-link -m+Q-BRIDGE-MIB -m+DGS-1210-28P-CX -v2c -c public 10.11.0.18 sysPortDescString DGS-1210-28P-CX::sysPortDescString.1 = STRING: Guest_Port DGS-1210-28P-CX::sysPortDescString.2 = STRING: Guest_Port DGS-1210-28P-CX::sysPortDescString.3 = STRING: Guest_Port DGS-1210-28P-CX::sysPortDescString.4 = STRING: Guest_Port DGS-1210-28P-CX::sysPortDescString.5 = STRING: Guest_Port DGS-1210-28P-CX::sysPortDescString.6 = STRING: Guest_Port DGS-1210-28P-CX::sysPortDescString.7 = STRING: Guest_Port DGS-1210-28P-CX::sysPortDescString.8 = STRING: Guest_Port DGS-1210-28P-CX::sysPortDescString.9 = STRING: Flow 39 DGS-1210-28P-CX::sysPortDescString.10 = STRING: DGS-1210-28P-CX::sysPortDescString.11 = STRING: PI 39 DGS-1210-28P-CX::sysPortDescString.12 = STRING: Flow 37 DGS-1210-28P-CX::sysPortDescString.13 = STRING: DGS-1210-28P-CX::sysPortDescString.14 = STRING: Beeb DGS-1210-28P-CX::sysPortDescString.15 = STRING: DGS-1210-28P-CX::sysPortDescString.16 = STRING: Lintercept DGS-1210-28P-CX::sysPortDescString.17 = STRING: DGS-1210-28P-CX::sysPortDescString.18 = STRING: DGS-1210-28P-CX::sysPortDescString.19 = STRING: DGS-1210-28P-CX::sysPortDescString.20 = STRING: DGS-1210-28P-CX::sysPortDescString.21 = STRING: Wifi - Ypenburg DGS-1210-28P-CX::sysPortDescString.22 = STRING: Wifi - Soesteberg DGS-1210-28P-CX::sysPortDescString.23 = STRING: Wifi - Valkenburg DGS-1210-28P-CX::sysPortDescString.24 = STRING: DGS-1210-28P-CX::sysPortDescString.25 = STRING: TopOfRack: 16A DGS-1210-28P-CX::sysPortDescString.26 = STRING: TopOfRack: 16B DGS-1210-28P-CX::sysPortDescString.27 = STRING: TopOfRack: 19A DGS-1210-28P-CX::sysPortDescString.28 = STRING: TopOfRack: 19B

3 4

Random NetMan UPS sensors appeared
by Robert Williams 09 Feb '16

09 Feb '16

Hi, Our daily discovery has just found a load of (invalid) new sensors on all our various Riello NetMan cards everywhere, easiest to show the image below. Basically, it seems to find various infratec-rms sensors, whatever they are? Obviously they don't exist on these devices, so we suddenly got a load of alarms from each UPS for each of the "failed" sensors: Running 7575 - Any ideas? Cheers! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

2 3

Rename ports? Ignore?
by John May 09 Feb '16

09 Feb '16

Is it possible to rename ports on a device? Eg: to make a switch's ports named as per the server connected to them? Also, can ports be ignored as servers can on the reporting? - John -- ------------------------------------------------------------------- John May : President http://www.pointinspace.com/ Point In Space Internet Solutions 800.664.8610 919.338.8198

1 1

Accessing Observium from mobile devices
by Laz C. Peterson 08 Feb '16

08 Feb '16

Hello everyone, We are trying out Observium CE, now seriously considering the subscription, and really love the interface and functionality of the application. One requirement we have is being able to access this information from a mobile device, such as iPhone. I have been searching online, unable to find any information about this topic. Does anyone know of a solution to this, or is there an existing template, app or product that can interface with Observium? Beautiful piece of software. Much thanks for any suggestions or insight. ~ Laz Peterson Paravis, LLC

2 4

API for Helpdesk
by chott＠praha1.net 08 Feb '16

08 Feb '16

Hello team, we are looking for solution probably via API how we can check status of ports for Helpdesk Staff My idea is, now all Customer has Customer ID and same ID we are use in Description in Port on switch Can i via API load status of port UP/DOWN for if i know Description of port? Or open window with this status? Thank you Tom [email-header-praha1] Tomas Chott technický ředitel chott(a)praha1.net<mailto:chott@praha1.net> Phone: +420 245 004 005 Mobile: +420 733 123 135 Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net<http://www.praha1.net> [Popis: Facebook]<http://www.facebook.com/praha1net> <http://www.linkedin.com/pub/tomas-chott/49/97a/1aa>

1 0

BGP Tab missing
by Duncan Mossop 08 Feb '16

08 Feb '16

Hi Adam, I would like to pick up an old thread, we’ve got a Juniper router that shows the following log entry at every polling: [cid:image001.png@01D161DB.426DF6D0] But has no BGP tab ☺ Last time we spoke you confirmed the data was there in MySQL so I’m curious where I can go next or if I can get some paid support on this? Thanks, Duncan Mossop • Operations Manager, SystemHOST Ltd ________________________________ dmossop(a)systemhost.co.uk [cid:image046f12.PNG@da9ed394.4998a39f] 01524 737414 systemhost.co.uk<http://www.systemhost.co.uk> [Twitter]<https://twitter.com/systemhost> Follow us on Twitter ________________________________ SystemHOST Ltd Registered office: Holmere Hall, Yealand Conyers, Carnforth, Lancs, LA5 9SN Registered in England No.05028996 VAT No. 927386490 This e-mail and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. By opening this email or its attachments, you accept liability for any damage that may be caused to your computer hardware, software or data. ________________________________

2 2

Alert check config for a UPS "Status" entry
by Spencer Ryan 08 Feb '16

08 Feb '16

We'd like to alert when any of our APC UPS'es output status is not "online" I see an alert check type is "status" but I'm not sure what to use for the other settings. Right now we have a UPS in hardware bypass due to a bad inverter (ugh) and the status entry says "event alert, status hardwareFailureBypass". Any tips? *Spencer Ryan* | Senior Systems Administrator | sryan(a)arbor.net *Arbor Networks* +1.734.794.5033 (d) | +1.734.846.2053 (m) www.arbornetworks.com

3 6

Graph presentation page - leaving it up for a long period
by Dirk-Willem van Gulik 08 Feb '16

08 Feb '16

During observing a team using observium coming from one of the similar competing platforms; noticed a fair bit of confusion as to what updates and what not. Mostly during ‘dive ins’ when something post incident was ‘kept an eye on’ for the ensuing 3-6 hours; including across work-shift related handovers. The issue is which pages auto-refresh - and which not. And I think the only place where it jars is at the date selection/update buttoned pages. Specifically - when you look at the detailed graph; i.e. on: http://10.11.0.132/graphs/to=1454928724/id=7287/type=sensor_graph/from=1454… Having gotten there from an overview page such as: http://10.11.0.132/device/device=722/tab=health/metric=temperature/id= 7287/ it shows right away as a most recent 24 hour ‘date preset’. The user then sees this page nicely reload every N minutes (as confirmed in the top right of the page). And an experienced ops-hand will track that from the corner of his/her eye - and ignore it the instant the graph stays ‘sane’. BUT in reality the date preset does not track - it is just the 6/24/48h/week/month/year tiny graphs at the top that get updated. And that is easy to miss. So two small UX things suggestions: 1) Would it be possible if, left unattended after, to start rolling with the time; updating the date presets bar when it was never touched in the first place. OR once it was shown for 2-3 minutes - highlight something in the Date preset bar to signal the data is out of date — e.g. have the Update/reload button on the far right be highlighted; i.e. signal an update is possible/due/needed. OR perhaps in combination with a pause/play button very OBVIOUSLY set to ‘pause’ as a more generic idea. 2) Since the preset shown there is in effect the second preset from the 6, 24, 48, one week bare above it - may be nice to indicate this - i.e. that the preset has been filled out in this mode. Dw.

1 0

db.log filling server [SEC=UNCLASSIFIED]
by Peter.Hine＠familycourt.gov.au 08 Feb '16

08 Feb '16

v0.16.1.7533 upgraded from 0.15.6.6430 ./discovery.php -u Observium Community Edition 0.16.1.7533 http://www.observium.org -- Database is up to date. it's full of entries like [2016/02/08 11:30:35 +1100] poller.php(622): Failed dbQuery (#1366 - Incorrect integer value: '' for column 'enabled' at row 1), Query: INSERT INTO `device_graphs` (` device_id`,`graph`,`enabled`) VALUES ('424','fdb_count','') [2016/02/08 11:30:35 +1100] poller.php(626): Failed dbQuery (#1366 - Incorrect integer value: '' for column 'enabled' at row 1), Query: INSERT INTO `device_graphs` (` device_id`,`graph`,`enabled`) VALUES ('427','fdb_count','') [2016/02/08 11:30:35 +1100] poller.php(622): Failed dbQuery (#1366 - Incorrect integer value: '' for column 'enabled' at row 1), Query: INSERT INTO `device_graphs` (` device_id`,`graph`,`enabled`) VALUES ('424','firewall_sessions_ipv4','') [2016/02/08 11:30:35 +1100] poller.php(610): Failed dbQuery (#1366 - Incorrect integer value: '' for column 'enabled' at row 1), Query: INSERT INTO `device_graphs` (` device_id`,`graph`,`enabled`) VALUES ('476','firewall_sessions_ipv4','') [2016/02/08 11:30:35 +1100] poller.php(626): Failed dbQuery (#1366 - Incorrect integer value: '' for column 'enabled' at row 1), Query: INSERT INTO `device_graphs` (` device_id`,`graph`,`enabled`) VALUES ('427','firewall_sessions_ipv4','') [2016/02/08 11:30:35 +1100] poller.php(603): Failed dbQuery (#1364 - Field 'ifInUcastPkts_delta' doesn't have a default value), Query: INSERT INTO `ports-state` (`pol l_time`,`poll_period`,`ifInOctets`,`ifOutOctets`,`ifInErrors`,`ifOutErrors`,`ifInUcastPkts`,`ifOutUcastPkts`,`ifInOctets_perc`,`ifOutOctets_perc`,`ifOctets_rate`,`ifU castPkts_rate`,`ifErrors_rate`,`port_id`) VALUES ('1454891434','1454891434','','','','','','','0','0','0','0','0','1668') [2016/02/08 11:30:35 +1100] poller.php(3592): Failed dbQuery (#1364 - Field 'mempool_polled' doesn't have a default value), Query: INSERT INTO `mempools-state` (`memp ool_id`) VALUES ('1973') [2016/02/08 11:30:35 +1100] poller.php(3592): Failed dbQuery (#1364 - Field 'mempool_polled' doesn't have a default value), Query: INSERT INTO `mempools-state` (`memp ool_id`) VALUES ('1974') [2016/02/08 11:30:35 +1100] poller.php(603): Failed dbQuery (#1364 - Field 'ifInUcastPkts_delta' doesn't have a default value), Query: INSERT INTO `ports-state` (`pol l_time`,`poll_period`,`ifInOctets`,`ifOutOctets`,`ifInErrors`,`ifOutErrors`,`ifInUcastPkts`,`ifOutUcastPkts`,`ifInOctets_perc`,`ifOutOctets_perc`,`ifOctets_rate`,`ifU castPkts_rate`,`ifErrors_rate`,`port_id`) VALUES ('1454891434','1454891434','','','','','','','0','0','0','0','0','1669') so the question is, how do i remediate it. thanks Peter Hine Senior Technical Support Engineer (Servers) FCoA ITS peter.hine(a)familycourt.gov.au ********************************************************************** The information contained in this e-mail (including any attachments) is for the exclusive use of the addressee. If you are not the intended recipient please notify the sender immediately and delete this e-mail. It is noted that legal privilege is not waived because you have read this e-mail. **********************************************************************

2 2

Custom Traffic Graph errors
by Roland Hill 08 Feb '16

08 Feb '16

Hi list, My installation details are as follows: Observium CE 0.16.1.7533 ##### Software versions ##### o OS Linux 4.2.0-27-generic [amd64] (Ubuntu 15.10) o Apache 2.4.12 o PHP 5.6.11-1ubuntu3.1 o Python 2.7.10 o MySQL 5.6.28-0ubuntu0.15.10.1 (extension: mysqli 5.6.28) o SNMP NET-SNMP 5.7.3 o RRDtool 1.5.4 ##### MySQL mode ##### o MySQL NO_ENGINE_SUBSTITUTION ##### Charset info ##### o PHP UTF-8 o MySQL utf8 ##### Timezones info ##### o Date Monday, 08-Feb-16 08:51:25 NZDT o PHP +13:00 o MySQL +13:00 Since upgrading to the latest CE version the Custom Traffic graphs have stopped displaying information, refer picture. I have let this run for a few days but they haven't updated. Any pointers would be appreciated. ...oh, and the new look and feel is great! -- Regards, Roland PGP Key 0xDA39319B = BCF0 1214 BAE9 5A3D 46FC 21A6 360D 9398 DA39 319B

1 0

MIB discovery - systemORD table - feature parity
by Dirk-Willem van Gulik 07 Feb '16

07 Feb '16

On some systems SNMPv2-MIB:: sysORTable contains a list of MIBs supported by the agent. Of interest is the: sysORID entry which is defined as: An authoritative identification of a capabilities statement with respect to various MIB modules supported by the local SNMPv2 entity acting in an agent role. and has the OID of those MIBs. Below tiny patch allows these to be 1) automatically included in the (sensor) scan. 2) Provides an option to have some skipped ($config['autodiscovery']['snmp_sysord']['ignore’]). Dw Index: include-dir-mib.inc.php =================================================================== --- include-dir-mib.inc.php (revision HEAD) +++ include-dir-mib.inc.php (working copy) @@ -32,17 +32,39 @@ $include_lib = isset($include_lib) && $include_lib; -foreach (get_device_mibs($device) as $mib) +$mibs = get_device_mibs($device); + +// Check for any (extra) advertized MIBs in the sysORD table; note that we are +// intentionally using 'all' - as we need the textual MIB name in order to +// create a possible file name. +// +$advertizedMIBs = snmpwalk_cache_multi_oid($device, "SNMPv2-MIB::sysORID", array(), "all"); +foreach($advertizedMIBs as $index=> $entry) { + $mib = strtoupper(reset($entry)); + if (!strstr($mib,'-mib')) { + $mib = preg_replace('/MIB$/','-MIB',$mib); + }; + + if (!preg_grep('/'.$mib.'/i',$config['autodiscovery']['snmp_sysord']['ignore']) + && !preg_grep('/'.$mib.'/i', $mibs)) + { + array_push($mibs, $mib); + }; +}; + +foreach ($mibs as $mib) { $inc_dir = $config['install_dir'] . '/' . $include_dir . '/' . strtolower($mib); $inc_file = $inc_dir . '.inc.php'; - if (is_device_mib($device, $mib)) + // We are bypassing the 'is part of the get_device_mibs list' check; as we are passing + // a list sourced from get_device_mibs with possibly additional discovery. + // + if (is_device_mib($device, $mib, TRUE, FALSE)) { if (is_file($inc_file)) { if (OBS_DEBUG) { echo("[[$mib]]"); } - include($inc_file); if ($include_lib && is_file($inc_dir . '.lib.php’)) Index: common.inc.php =================================================================== --- common.inc.php (revision HEAD) +++ common.inc.php (working copy) @@ -2172,11 +2174,14 @@ // DOCME needs phpdoc block // TESTME needs unit testing // MOVEME to includes/functions.inc.php -function is_device_mib($device, $mib, $check_permissions = TRUE) +function is_device_mib($device, $mib, $check_permissions = TRUE, $check_in_mib_list = TRUE) { global $config; - $mib_permitted = in_array($mib, get_device_mibs($device)); // Check if mib available for device + $mib_permitted = TRUE; + if ($check_in_mib_list) + $mib_permitted = in_array($mib, get_device_mibs($device)); // Check if mib available for device + if ($check_permissions && $mib_permitted && (!isset($config['mibs'][$mib]['enable']) || $config['mibs'][$mib]['enable'])) { // Check if MIB permitted by config Index: defaults.inc.php =================================================================== --- defaults.inc.php (revision HEAD) +++ defaults.inc.php (working copy) @@ -174,6 +174,7 @@ $config['snmp']['v3'][0]['cryptopass'] = ""; // Privacy (Encryption) Passphrase $config['snmp']['v3'][0]['cryptoalgo'] = "AES"; // AES | DES + // Autodiscovery Settings $config['autodiscovery']['xdp'] = TRUE; // Autodiscover hosts via discovery protocols (CDP, LLDP, FDP, AMAP and other) @@ -186,6 +187,8 @@ $config['autodiscovery']['ip_nets'] = array("127.0.0.0/8", "192.168.0.0/16", "10.0.0.0/8", "172.16.0.0/12"); // Networks to permit autodiscovery $config['autodiscovery']['ping_skip'] = FALSE; // Skip icmp echo checks during autodiscovery (beware timeouts during discovery!) +$config['autodiscovery']['snmp_sysord']['ignore'] = array('snmpMPDCompliance',' usmMIBCompliance','snmpFrameworkMIBCompliance','vacmBasicGroup','snmpNotifyFullCompliance'); + $config['discover_services'] = FALSE; // Autodiscover services via SNMP on devices of type "server" // Mailer backend Settings

2 2

syslog not working for one server
by Patrick Marquetecken 07 Feb '16

07 Feb '16

Hi, I have syslog working for more then 10 hosts but, for one I can’t get it to work. This server is not in the same location, it sent its log through a vpn tunnel, when it arrives at the router I do a natting: Just forward to the observium server. I see the ump traffic arriving but notting show up in the syslog (database) We can monitor the server without any problems. anyone a suggestion ? Thanks

2 1

Extracting port names from D-Link switches - feature parity
by Dirk-Willem van Gulik 07 Feb '16

07 Feb '16

In observium we cannot, AFAIUI from the UI, overwrite the various switch port names. Observium relies on the port names getting set ‘right’ on the agent side. However - having control over the name is useful e.g. for peering/ transit link regex()ing and what not. Unfortunately not all switches allow for this (for some reason, it seems to be mostly enterprise POE switches). One vendor that does not allow this is D-Link; their ifNames are hardcoded to Slot/0, Port0.0 or the empty string on some (most recent?) product lines. However they do allow the editing of the sysPortDescString in their private enterprise MIB (through config, API, SNMP or the web interface). Below is a small file diff that makes this possible. It is a bit inefficient; as doing it at discovery time is not enough; ifName is watched by the port poller —and I cannot see an easy place to make a ‘note’ of the expensively found OID. But may be of use as a starting point for some. Dw. beeb $ svn diff Index: observium/includes/polling/ports/companysystems.inc.php =================================================================== --- observium/includes/polling/ports/companysystems.inc.php (nonexistent) +++ observium/includes/polling/ports/companysystems.inc.php (working copy) @@ -0,0 +1,89 @@ +<?php + +/** + * companySystem - various D-Link switches have an extra sysPortDescString + * which unlike ifName/ifName can be configured (i.e. are not hardcoded + * to Slot0/0, the Emptry String or Port0.0). + * + * Here we discover them; and if set - add them to the ifName. + * + * Unfortunately - D-Link does use a different MIB for every product (even + * though the structure is pretty much identical). The path is contructed: + * + * enterprises.d-link.dlink-products.$series.$model.$type.companySystem.... + * + * with values such as dlink-DGS12XXSeriesProd.dgs-1210-28p.dgs-1210-28pcx + * for the series, model and type. + * + * Under companySystem we are after the field + * + * sysPortDescriptionTable.sysPortDescriptionEntry.sysPortDescString.<index> + * + * @package observium + * @subpackage discovery + * @copyright (C) 2013 dirkx + * + */ + +echo(" D-Link companySystem-MIB"); + +# We do a bit of a trick - and rely on the fact that the companySystem is first. # And use that to ‘tell’ us enough to get the MIB of that specific product. +# +# This way we discover the series/model/type without having to do a 35 Mbyte +# SNMP walk of the whole device. +# +# Unfortunately that does mean we have to use 'all'; which slows down +# polling (but we have to do it during polling; as any ifName set during +# discovery is uncerimouniously wacked on the next poll, with an alert +# to boot). The alternative would be to hardcode the 60-odd OID's for +# D-Link in this file. +# +# So we do this in two steps - one to check if there is any +# D-Link stuff - and then the actual more expensive pass. +# +$topoid = ".1.3.6.1.4.1.171"; +$str= snmp_get($device, $topoid,NULL,NULL,NULL,NULL, TRUE); // a getnext call + +if ($str) { + // pretty sure this is a D-Link switch of some description now. + // So do the more expensive pass. + // + + $topoid = '.iso.org.dod.internet.private.enterprises.d-link'; + $str= snmp_get($device, $topoid,NULL,'all',NULL,NULL, TRUE); // // a getnext call + + $cnt = 0; + if ($str) { + // Deconstruct the reply - to extract the actual per-product + // MIB name. + // + // DGS-1210-28P-CX::sysSwitchName.0 = STRING: 24x PoE Switch DLink + // + list($field, $skipEq, $skipStr, $name) = split(' ',$str,4); + list($mib, $skipField) = split('::', $field); + + $portOids = snmpwalk_cache_multi_oid($device, "sysPortDescString", array(), $mib); + + //Note that we are assuming that index = ifIndex (which seems to be the standard on D-Link kit). + // + foreach ($portOids as $ifIndex => $entry) + { + $descr = $entry[ sysPortDescString ]; + + if ($descr) { + $port = $port_stats[ $ifIndex ]; + $name = $port['ifName']; + + if (strlen($name)) { + $descr = "$descr ($name)"; + }; + $port_stats[$ifIndex]['ifName'] = $descr; + $cnt++; + }; + }; + }; + }; +if ($cnt) { + echo "[$cnt]"; +}; + Property changes on: companysystems.inc.php ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +Author Date Id Revision \ No newline at end of property

1 0

definitions.dat and sensor_types
by Dirk-Willem van Gulik 06 Feb '16

06 Feb '16

We have a tiny sensor/discovery module (gist below) that picks up the (back)pressure, in Bar, of a cooling system. However when we add below to config.php: $config['sensor_types']['pressure']['symbol']='B'; $config['sensor_types']['pressure']['text']='Pressure'; $config['sensor_types']['pressure']['icon']=‘oicon-omega’; it seems that these values are wiped/overwritten by the values from definitions.dat. What, or perhaps, where, is the proper way to add these ? Thanks, Dw. <?php /* — Fetch backpressure on various P, C and I flows. dirkx(at)apache.org */ $oids = snmpwalk_cache_multi_oid($device, “backPressureTable", array(), “DANFLOSS-MIB"); foreach ($oids as $index => $entry) { $label = $entry[‘backPressureLabel']; $descr = $entry[‘backPressureDescr’]; // The older units have just a count - prefix with the label (firmware issue on the pump itself, // cannot be remedied through the puppet/config-deploy). // if (strlen($descr) < 3) { $descr = "$label $descr”; }; $type = ‘pressure'; foreach(array(‘backPressureTop', 'backPressureEgress','backPressureCompressure') as $field) { $oid = snmp_translate($field.'.'.$index, "DANFLOSS-MIB"); $value = $entry[ $field ]; $divisor = $entry[ $field.'Divisor' ]; if (!$divisor) $divisor = 1; if (is_numeric($value)) { /* Longer term - these prolly should go in one custom graph - rather than three */ discover_sensor($valid['sensor'], $type, $device, $oid, "$field.$index", ‘danfloss', $descr.' '.$field, 1.0/$divisor, $value); }; }; };

2 3

RRDBug ?
by Dirk-Willem van Gulik 06 Feb '16

06 Feb '16

With a fresh install - seeing quite a few cases like below — odd Y axis legend. The values are roughly at 2.2 and 2.0 and only happen for some ranges. Not sure if this is an old or new problem. Fair to assume this is purely something RRD related/bug ? Dw. Performance & Output RRDTool Output: 1233x369 Total time: 0.279 | RRDtool time: 0.277s RRDTool Command rrdtool graph /tmp/KjJTF5RCwhWzDBRY.png -Y --alt-autoscale --start 1454609307 --end 1454695707 --width 1152 --height 300 -c BACK#EEEEEE00 -c SHADEA#EEEEEE00 -c SHADEB#EEEEEE00 -c FONT#000000 -c CANVAS#FFFFFF00 -c GRID#a5a5a5 -c MGRID#FF9999 -c FRAME#5e5e5e -c ARROW#5e5e5e -R normal --font LEGEND:8:'DroidSansMono,DejaVuSansMono' --font AXIS:7:'DroidSansMono,DejaVuSansMono' --font-render-mode normal -E COMMENT:'Amperes ' COMMENT:' Now' COMMENT:' Avg' COMMENT:' Min' COMMENT:' Max' COMMENT:'\l' DEF:ds16=/usr/local/XXXXXXXXX/rrd/rts.rack/sensor-current-apc-atsOutputCurrent.1.1.1.rrd:sensor:AVERAGE DEF:ds16min=/usr/local/XXXXXXXXX/rrd/rts.rack/sensor-current-apc-atsOutputCurrent.1.1.1.rrd:sensor:MIN DEF:ds16max=/usr/local/XXXXXXXXX/rrd/rts.rack/sensor-current-apc-atsOutputCurrent.1.1.1.rrd:sensor:MAX LINE1.25:ds16#1f78b4:'Output ' GPRINT:ds16:LAST:%6.1lf%s GPRINT:ds16:AVERAGE:%6.1lf%s GPRINT:ds16min:MIN:%6.1lf%s GPRINT:ds16max:MAX:%6.1lf%s COMMENT:'\l' HRULE:0#555555 RRDTool Files Used No RRD information returned. This may be because the graph module doesn't yet return this data.

3 5

FreeBSD ports - Observium CE update to
by Dirk-Willem van Gulik 06 Feb '16

06 Feb '16

Folks, The FreeBSD port has been updated to Observium CE 0.16.1.7533; along with a whole bunch of extra/updated dependencies. This also makes the migration/activation to the professional version pretty much a ‘drop in’ now & makes the polling more efficient. SNMP internal mode is expressly disabled (it seems to suffer from the same issue as on fedora - some substitution issue). Thanks, Dw.

2 3

merge 2 observium installs
by Andy Goldschmidt 05 Feb '16

05 Feb '16

Hi Is it possible to merge 2 installs of Observium together? We have taken over another companies Observium and want to simply add it to our existing one. Thanks for your help Regards Andy

2 1

Reg: ARP Table not working
by Madhu Neal 05 Feb '16

05 Feb '16

Hi Team, I upgraded recently (a couple of times this week) and just reported that the ARP/NDP Table part of observium doesn’t load. Nothing errors in the apache error log. When I run poller.php manually, it does pull the information also. Please support, let me know what's needs to take care. Many Thanks, Madhu

3 4

Port Speed
by Anders Johansson 04 Feb '16

04 Feb '16

I can't still get my head around the percentage issues I'm seeing with juniper: Alert Monitor Port Utilization above 80% Entity ge-1/1/0 Conditions ifInOctets_perc ge 80 (15053) Metrics ifInOctets_perc = 15053 ifOutOctets_perc = 0 Duration 9m 17s (2016-01-29 06:52:34) Hardware EX2200-48T-4G Operating System Juniper JunOS 12.3R6.6 Ethernet Switch If I look at the event log for that port, and a lot of others from Juniper it seems like they are stuck in some wiered loop: 2016-01-29 07:25:55 Interface changed: [ifName] '' -> 'ge-1/0/0'; [ifAlias] '' -> 'Office'; [ifHighSpeed] '' -> '0'; [ifPromiscuousMode] '' -> 'false'; [ifConnectorPresent] '' -> 'true' 2016-01-29 07:04:31 Interface changed: [ifName] 'ge-1/0/0' -> NULL; [ifDuplex] '' -> 'fullDuplex' 2016-01-29 07:01:30 Interface changed: [ifName] '' -> 'ge-1/0/0' 2016-01-29 06:52:33 Interface changed: [ifTrunk] '' -> 'dot1Q'; [ifVlan] '' -> '104'; [ifLastChange] '2016-01-29 06:41:27' -> '2015-12-04 14:53:21' 2016-01-29 06:52:32 Interface DELETED mark removed 2016-01-29 06:41:27 Interface was marked as DELETED 2016-01-29 06:41:10 Interface changed: [ifName] 'ge-1/0/0' -> NULL; [ifHighSpeed] '0' -> NULL; [ifPromiscuousMode] 'false' -> NULL; [ifConnectorPresent] 'true' -> NULL; [ifTrunk] 'dot1Q' -> NULL; [ifVlan] '104' -> NULL 2016-01-29 06:40:39 Interface changed: [ifAlias] 'Office' -> NULL; [ifHighSpeed] '' -> '0'; [ifPromiscuousMode] '' -> 'false'; [ifTrunk] '' -> 'dot1Q'; [ifVlan] '' -> '104' 2016-01-29 06:30:23 Interface changed: [ifAlias] '' -> 'Office'; [ifConnectorPresent] '' -> 'true'; [ifVlan] '104' -> NULL 2016-01-29 06:30:22 Interface changed: [ifHighSpeed] '0' -> NULL; [ifPromiscuousMode] 'false' -> NULL; [ifVlan] '104' -> NULL 2016-01-29 06:20:20 Interface changed: [ifName] '' -> 'ge-1/0/0'; [ifHighSpeed] '' -> '0'; [ifPromiscuousMode] '' -> 'false'; [ifVlan] '' -> '104' 2016-01-29 06:20:20 Interface changed: [ifName] '' -> 'ge-1/0/0' 2016-01-29 06:09:45 Interface changed: [ifName] 'ge-1/0/0' -> NULL; [ifAlias] 'Office' -> NULL; [ifHighSpeed] '0' -> NULL; [ifPromiscuousMode] 'false' -> NULL; [ifConnectorPresent] 'true' -> NULL; [ifVlan] '104' -> NULL 2016-01-29 06:09:14 Interface changed: [ifName] '' -> 'ge-1/0/0'; [ifAlias] '' -> 'Office'; [ifHighSpeed] '' -> '0'; [ifPromiscuousMode] '' -> 'false'; [ifConnectorPresent] '' -> 'true'; [ifVlan] '' -> '104' 2016-01-29 05:59:05 Interface changed: [ifName] 'ge-1/0/0' -> NULL 2016-01-29 05:59:04 Interface changed: [ifName] '' -> 'ge-1/0/0' 2016-01-29 05:51:02 Interface changed: [ifName] 'ge-1/0/0' -> NULL; [ifTrunk] 'dot1Q' -> NULL; [ifVlan] '104' -> NULL 2016-01-29 05:50:33 Interface changed: [ifName] '' -> 'ge-1/0/0' 2016-01-29 05:42:07 Interface changed: [ifTrunk] '' -> 'dot1Q'; [ifVlan] '' -> '104'; [ifLastChange] '2016-01-29 05:31:20' -> '2015-12-04 14:53:22' 2016-01-29 05:42:05 Interface DELETED mark removed 2016-01-29 05:31:21 Interface was marked as DELETED 2016-01-29 05:30:56 Interface changed: [ifName] 'ge-1/0/0' -> NULL; [ifVlan] '104' -> NULL 2016-01-29 05:30:31 Interface changed: [ifVlan] '' -> '104' 2016-01-29 05:20:35 Interface changed: [ifAlias] 'Office' -> NULL; [ifHighSpeed] '0' -> NULL; [ifPromiscuousMode] 'false' -> NULL; [ifConnectorPresent] 'true' -> NULL; [ifTrunk] 'dot1Q' -> NULL; [ifVlan] '104' -> NULL 2016-01-29 05:20:08 Interface changed: [ifName] '' -> 'ge-1/0/0'; [ifAlias] '' -> 'Office'; [ifHighSpeed] '' -> '0'; [ifPromiscuousMode] '' -> 'false'; [ifConnectorPresent] '' -> 'true'; [ifTrunk] '' -> 'dot1Q'; [ifVlan] '' -> '104' 2016-01-29 05:10:28 Interface changed: [ifName] 'ge-1/0/0' -> NULL; [ifLastChange] '2016-01-29 05:09:56' -> '2015-12-04 14:53:21' 2016-01-29 05:10:26 Interface DELETED mark removed 2016-01-29 05:09:57 Interface was marked as DELETED 2016-01-29 05:01:03 Interface changed: [ifHighSpeed] '0' -> NULL; [ifPromiscuousMode] 'false' -> NULL; [ifTrunk] 'dot1Q' -> NULL; [ifVlan] '104' -> NULL 2016-01-29 05:00:56 Interface changed: [ifName] '' -> 'ge-1/0/0'; [ifHighSpeed] '' -> '0'; [ifPromiscuousMode] '' -> 'false'; [ifTrunk] '' -> 'dot1Q'; [ifVlan] '' -> '104' 2016-01-29 04:49:42 Interface changed: [ifName] 'ge-1/0/0' -> NULL; [ifAlias] 'Office' -> NULL; [ifHighSpeed] '0' -> NULL; [ifPromiscuousMode] 'false' -> NULL; [ifConnectorPresent] 'true' -> NULL; [ifVlan] '104' -> NULL 2016-01-29 04:49:39 Interface changed: [ifName] '' -> 'ge-1/0/0'; [ifAlias] '' -> 'Office'; [ifHighSpeed] '' -> '0'; [ifPromiscuousMode] '' -> 'false'; [ifConnectorPresent] '' -> 'true'; [ifVlan] '' -> '104' 2016-01-29 04:40:18 Interface changed: [ifName] 'ge-1/0/0' -> NULL; [ifVlan] '104' -> NULL 2016-01-29 04:39:29 Interface changed: [ifName] '' -> 'ge-1/0/0' 2016-01-29 04:30:38 Interface changed: [ifName] 'ge-1/0/0' -> NULL; [ifVlan] '' -> '104' 2016-01-29 04:30:33 Interface changed: [ifName] '' -> 'ge-1/0/0' 2016-01-29 04:20:00 Interface changed: [ifName] 'ge-1/0/0' -> NULL; [ifHighSpeed] '0' -> NULL; [ifPromiscuousMode] 'false' -> NULL 2016-01-29 04:19:37 Interface changed: [ifName] '' -> 'ge-1/0/0'; [ifHighSpeed] '' -> '0'; [ifPromiscuousMode] '' -> 'false' 2016-01-29 04:09:44 Interface changed: [ifName] 'ge-1/0/0' -> NULL; [ifVlan] '104' -> NULL 2016-01-29 04:09:32 Interface changed: [ifName] '' -> 'ge-1/0/0'; [ifVlan] '' -> '104' 2016-01-29 04:00:22 Interface changed: [ifName] 'ge-1/0/0' -> NULL; [ifAlias] 'Office' -> NULL; [ifHighSpeed] '0' -> NULL; [ifPromiscuousMode] 'false' -> NULL; [ifConnectorPresent] 'true' -> NULL; [ifVlan] '104' -> NULL 2016-01-29 03:59:43 Interface changed: [ifName] '' -> 'ge-1/0/0'; [ifAlias] '' -> 'Office'; [ifHighSpeed] '' -> '0'; [ifPromiscuousMode] '' -> 'false'; [ifConnectorPresent] '' -> 'true'; [ifVlan] '' -> '104' 2016-01-29 03:49:13 Interface changed: [ifName] 'ge-1/0/0' -> NULL; [ifHighSpeed] '0' -> NULL; [ifPromiscuousMode] 'false' -> NULL; [ifConnectorPresent] 'true' -> NULL 2016-01-29 03:49:10 Interface changed: [ifHighSpeed] '' -> '0'; [ifPromiscuousMode] '' -> 'false'; [ifConnectorPresent] '' -> 'true'; [ifVlan] '104' -> NULL 2016-01-29 03:40:20 Interface changed: [ifVlan] '' -> '104' 2016-01-29 03:30:17 Interface changed: [ifAlias] 'Office' -> NULL; [ifHighSpeed] '0' -> NULL; [ifPromiscuousMode] 'false' -> NULL; [ifConnectorPresent] 'true' -> NULL; [ifTrunk] 'dot1Q' -> NULL; [ifVlan] '104' -> NULL 2016-01-29 03:29:54 Interface changed: [ifAlias] '' -> 'Office'; [ifHighSpeed] '' -> '0'; [ifPromiscuousMode] '' -> 'false'; [ifConnectorPresent] '' -> 'true'; [ifTrunk] '' -> 'dot1Q' 2016-01-29 03:19:05 Interface changed: [ifName] '' -> 'ge-1/0/0'; [ifVlan] '' -> '104' 2016-01-29 03:10:14 Interface changed: [ifName] 'ge-1/0/0' -> NULL; [ifHighSpeed] '0' -> NULL; [ifTrunk] 'dot1Q' -> NULL; [ifVlan] '104' -> NULL 2016-01-29 03:10:14 Interface changed: [ifHighSpeed] '0' -> NULL; [ifTrunk] 'dot1Q' -> NULL 2016-01-29 02:59:56 Interface changed: [ifName] '' -> 'ge-1/0/0'; [ifHighSpeed] '' -> '0'; [ifTrunk] '' -> 'dot1Q'; [ifVlan] '' -> '104' 2016-01-29 02:59:52 Interface changed: [ifOperStatus] '' -> 'down'; [ifLastChange] '2016-01-29 02:49:17' -> '2015-12-04 14:53:22' 2016-01-29 02:49:19 Interface changed: [ifOperStatus] 'down' -> NULL; [ifName] 'ge-1/0/0' -> NULL; [ifVlan] '104' -> NULL; [ifLastChange] '2015-12-04 14:53:22' -> '2016-01-29 02:49:17' 2016-01-29 02:49:15 Interface changed: [ifName] '' -> 'ge-1/0/0'; [ifVlan] '' -> '104' 2016-01-29 02:39:44 Interface changed: [ifName] 'ge-1/0/0' -> NULL; [ifAlias] 'Office' -> NULL; [ifHighSpeed] '0' -> NULL; [ifPromiscuousMode] 'false' -> NULL; [ifConnectorPresent] 'true' -> NULL; [ifVlan] '104' -> NULL 2016-01-29 02:39:38 Interface changed: [ifName] '' -> 'ge-1/0/0'; [ifAlias] '' -> 'Office'; [ifHighSpeed] '' -> '0'; [ifPromiscuousMode] '' -> 'false'; [ifConnectorPresent] '' -> 'true'; [ifVlan] '' -> '104' 2016-01-29 02:29:45 Interface changed: [ifName] 'ge-1/0/0' -> NULL; [ifAlias] 'Office' -> NULL; [ifHighSpeed] '0' -> NULL; [ifPromiscuousMode] 'false' -> NULL; [ifConnectorPresent] 'true' -> NULL; [ifVlan] '104' -> NULL 2016-01-29 02:29:34 Interface changed: [ifName] '' -> 'ge-1/0/0'; [ifAlias] '' -> 'Office'; [ifHighSpeed] '' -> '0'; [ifPromiscuousMode] '' -> 'false'; [ifConnectorPresent] '' -> 'true'; [ifVlan] '' -> '104' 2016-01-29 02:19:50 Interface changed: [ifName] 'ge-1/0/0' -> NULL; [ifAlias] 'Office' -> NULL; [ifHighSpeed] '0' -> NULL; [ifPromiscuousMode] 'false' -> NULL; [ifConnectorPresent] 'true' -> NULL 2016-01-29 02:09:18 Interface changed: [ifName] '' -> 'ge-1/0/0'; [ifAlias] '' -> 'Office'; [ifHighSpeed] '' -> '0'; [ifPromiscuousMode] '' -> 'false'; [ifConnectorPresent] '' -> 'true' 2016-01-29 01:59:32 Interface changed: [ifName] 'ge-1/0/0' -> NULL; [ifAlias] 'Office' -> NULL; [ifHighSpeed] '0' -> NULL; [ifPromiscuousMode] 'false' -> NULL; [ifConnectorPresent] 'true' -> NULL; [ifVlan] '104' -> NULL 2016-01-29 01:59:28 Interface changed: [ifName] '' -> 'ge-1/0/0'; [ifAlias] '' -> 'Office'; [ifHighSpeed] '' -> '0'; [ifPromiscuousMode] '' -> 'false'; [ifConnectorPresent] '' -> 'true'; [ifVlan] '' -> '104' 2016-01-29 01:49:35 Interface changed: [ifName] 'ge-1/0/0' -> NULL 2016-01-29 01:49:08 Interface changed: [ifName] '' -> 'ge-1/0/0' 2016-01-29 01:39:07 Interface changed: [ifName] 'ge-1/0/0' -> NULL; [ifAlias] 'Office' -> NULL; [ifHighSpeed] '0' -> NULL; [ifPromiscuousMode] 'false' -> NULL; [ifConnectorPresent] 'true' -> NULL; [ifVlan] '104' -> NULL 2016-01-29 01:39:03 Interface changed: [ifName] '' -> 'ge-1/0/0'; [ifAlias] '' -> 'Office'; [ifHighSpeed] '' -> '0'; [ifPromiscuousMode] '' -> 'false'; [ifConnectorPresent] '' -> 'true'; [ifVlan] '' -> '104' 2016-01-29 01:29:27 Interface changed: [ifName] 'ge-1/0/0' -> NULL; [ifAlias] 'Office' -> NULL; [ifHighSpeed] '0' -> NULL; [ifPromiscuousMode] 'false' -> NULL; [ifConnectorPresent] 'true' -> NULL 2016-01-29 01:29:25 Interface changed: [ifVlan] '104' -> NULL 2016-01-29 01:19:18 Interface changed: [ifName] '' -> 'ge-1/0/0'; [ifAlias] '' -> 'Office'; [ifHighSpeed] '' -> '0'; [ifPromiscuousMode] '' -> 'false'; [ifConnectorPresent] '' -> 'true'; [ifVlan] '' -> '104' 2016-01-29 01:09:15 Interface changed: [ifName] 'ge-1/0/0' -> NULL; [ifHighSpeed] '0' -> NULL 2016-01-29 01:09:12 Interface changed: [ifHighSpeed] '' -> '0'; [ifVlan] '104' -> NULL 2016-01-29 00:59:16 Interface changed: [ifName] '' -> 'ge-1/0/0'; [ifVlan] '' -> '104' 2016-01-29 00:59:15 Interface changed: [ifName] 'ge-1/0/0' -> NULL; [ifHighSpeed] '0' -> NULL 2016-01-29 00:49:07 Interface changed: [ifName] '' -> 'ge-1/0/0'; [ifHighSpeed] '' -> '0' 2016-01-29 00:39:08 Interface changed: [ifName] 'ge-1/0/0' -> NULL; [ifVlan] '104' -> NULL 2016-01-29 00:39:05 Interface changed: [ifName] '' -> 'ge-1/0/0'; [ifVlan] '' -> '104' 2016-01-29 00:28:58 Interface changed: [ifName] 'ge-1/0/0' -> NULL; [ifAlias] 'Office' -> NULL; [ifHighSpeed] '0' -> NULL; [ifPromiscuousMode] 'false' -> NULL; [ifConnectorPresent] 'true' -> NULL; [ifVlan] '104' -> NULL 2016-01-29 00:19:04 Interface changed: [ifName] '' -> 'ge-1/0/0'; [ifAlias] '' -> 'Office'; [ifHighSpeed] '' -> '0'; [ifPromiscuousMode] '' -> 'false'; [ifConnectorPresent] '' -> 'true'; [ifVlan] '' -> '104' 2016-01-29 00:09:02 Interface changed: [ifName] 'ge-1/0/0' -> NULL; [ifVlan] '104' -> NULL 2016-01-29 00:08:58 Interface changed: [ifAlias] 'Office' -> NULL; [ifHighSpeed] '0' -> NULL; [ifPromiscuousMode] 'false' -> NULL; [ifConnectorPresent] 'true' -> NULL 2016-01-28 23:58:49 Interface changed: [ifName] '' -> 'ge-1/0/0'; [ifAlias] '' -> 'Office'; [ifHighSpeed] '' -> '0'; [ifPromiscuousMode] '' -> 'false'; [ifConnectorPresent] '' -> 'true'; [ifVlan] '' -> '104' 2016-01-28 23:48:56 Interface changed: [ifName] 'ge-1/0/0' -> NULL; [ifHighSpeed] '0' -> NULL; [ifPromiscuousMode] 'false' -> NULL; [ifConnectorPresent] 'true' -> NULL; [ifVlan] '104' -> NULL 2016-01-28 23:48:54 Interface changed: [ifAlias] 'Office' -> NULL 2016-01-28 23:38:46 Interface changed: [ifName] '' -> 'ge-1/0/0'; [ifAlias] '' -> 'Office'; [ifHighSpeed] '' -> '0'; [ifPromiscuousMode] '' -> 'false'; [ifConnectorPresent] '' -> 'true'; [ifVlan] '' -> '104' 2016-01-28 23:28:43 Interface changed: [ifName] 'ge-1/0/0' -> NULL; [ifAlias] 'Office' -> NULL; [ifHighSpeed] '0' -> NULL; [ifPromiscuousMode] 'false' -> NULL; [ifConnectorPresent] 'true' -> NULL; [ifVlan] '104' -> NULL 2016-01-28 23:18:41 Interface changed: [ifName] '' -> 'ge-1/0/0'; [ifAlias] '' -> 'Office'; [ifHighSpeed] '' -> '0'; [ifPromiscuousMode] '' -> 'false'; [ifConnectorPresent] '' -> 'true'; [ifVlan] '' -> '104' 2016-01-28 23:18:37 Interface changed: [ifName] 'ge-1/0/0' -> NULL; [ifHighSpeed] '0' -> NULL; [ifPromiscuousMode] 'false' -> NULL; [ifConnectorPresent] 'true' -> NULL; [ifVlan] '104' -> NULL 2016-01-28 23:08:36 Interface changed: [ifName] '' -> 'ge-1/0/0'; [ifHighSpeed] '' -> '0'; [ifPromiscuousMode] '' -> 'false'; [ifConnectorPresent] '' -> 'true'; [ifVlan] '' -> '104' 2016-01-28 23:08:34 Interface changed: [ifVlan] '104' -> NULL 2016-01-28 22:59:02 Interface changed: [ifVlan] '' -> '104'; [ifLastChange] '2016-01-28 22:56:58' -> '2015-12-04 14:53:22' 2016-01-28 22:59:00 Interface DELETED mark removed 2016-01-28 22:56:58 Interface was marked as DELETED 2016-01-28 22:48:40 Interface changed: [ifName] 'ge-1/0/0' -> NULL; [ifAlias] 'Office' -> NULL; [ifHighSpeed] '0' -> NULL; [ifPromiscuousMode] 'false' -> NULL; [ifConnectorPresent] 'true' -> NULL; [ifVlan] '104' -> NULL 2016-01-28 22:48:35 Interface changed: [ifName] '' -> 'ge-1/0/0'; [ifAlias] '' -> 'Office'; [ifHighSpeed] '' -> '0'; [ifPromiscuousMode] '' -> 'false'; [ifConnectorPresent] '' -> 'true'; [ifVlan] '' -> '104' 2016-01-28 22:38:50 Interface changed: [ifName] 'ge-1/0/0' -> NULL; [ifAlias] 'Office' -> NULL; [ifHighSpeed] '0' -> NULL; [ifPromiscuousMode] 'false' -> NULL; [ifConnectorPresent] 'true' -> NULL; [ifVlan] '104' -> NULL 2016-01-28 22:28:39 Interface changed: [ifName] '' -> 'ge-1/0/0'; [ifAlias] '' -> 'Office'; [ifHighSpeed] '' -> '0'; [ifPromiscuousMode] '' -> 'false'; [ifConnectorPresent] '' -> 'true'; [ifVlan] '' -> '104' 2016-01-28 22:28:34 Interface changed: [ifName] 'ge-1/0/0' -> NULL 2016-01-28 22:20:30 Interface changed: [ifName] '' -> 'ge-1/0/0' 2016-01-28 22:10:25 Interface changed: [ifName] 'ge-1/0/0' -> NULL; [ifAlias] 'Office' -> NULL; [ifHighSpeed] '0' -> NULL; [ifPromiscuousMode] 'false' -> NULL; [ifConnectorPresent] 'true' -> NULL; [ifVlan] '104' -> NULL 2016-01-28 22:09:58 Interface changed: [ifAlias] '' -> 'Office'; [ifHighSpeed] '' -> '0'; [ifPromiscuousMode] '' -> 'false'; [ifConnectorPresent] '' -> 'true'; [ifVlan] '' -> '104'

2 2

migrate all hosts from old observium to a new one
by Jose Colin 04 Feb '16

04 Feb '16

Hello Guys i want to ask you if you know the correct way to migrate all hosts of an old observium server to a new one if there a export/import option? thanks in advice ! Jose

2 1

Error Drawing Graph
by Alasdair MacLeod 04 Feb '16

04 Feb '16

Hi Guys, When I try to show the graph on a router interface for Traffic it comes up with a pink background with no grap. It says “Error Drawing Graph”. Does anyone know what can be causing this? Thanks.

1 0

Small feature suggestion - ports/brew/dpkg/etc collections
by Dirk-Willem van Gulik 04 Feb '16

04 Feb '16

Couple of small feature suggestions - Would be nice if we could rely on a http://www.observium.org/observium-0.16.1.7533.tar.gz in parallel to the standard http://www.observium.org/observium-community-latest.tar.gz for the varius dpkg/debian/freebd/brew port collections. - Would be nice if the block in defaults.inc.php with: // Location of executables $config['rrdtool'] = "/usr/local/bin/rrdtool”; ……. $config['file'] = "/usr/bin/file”; could be overwridden by a <ROOTDIR>/config.os.php - and perhaps itself live separate from the defaults. As this allows a puppet/ansible/chef recipe (or the various ports collections) to manage this file as an OS specific thing; and keep the per system configs strictly in config.php. Making the latter the only thing to preserve across migrations (and not having to cross check it for OS specific ‘new’ things). With more and more people using things like vagrant/docker/etc - that sort of abstraction becomes useful. Dw.

3 3

Reg: Port Errors
by Madhu Neal 04 Feb '16

04 Feb '16

Team, I just saw I had a warning on port errors and looked at it. Can you please help me to understand? Many Thanks, Madhu

3 4

FreeBSD 10.2 installation
by Dirk-Willem van Gulik 04 Feb '16

04 Feb '16

Just in case any one needs it (and so that I can find it back when I do) - below is the updated install for a barebones totally isolated BSD install. Dw. #!/bin/sh set -x set -e BATCH=yes export BATCH pkg install \ sudo \ observium \ mysql56-server \ apache24 mod_php56 pkg install \ php56_zlib php56-posix php56-iconv cat << EOM > /usr/local/etc/apache24/Includes/php.conf <FilesMatch "\.php$"> SetHandler application/x-httpd-php </FilesMatch> <FilesMatch "\.phps$"> SetHandler application/x-httpd-php-source </FilesMatch> EOM cat << EOM > /usr/local/etc/apache24/Includes/observium.conf <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /usr/local/www/observium/html DirectoryIndex index.php <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /usr/local/www/observium/html/> Options Indexes FollowSymLinks MultiViews AllowOverride All Require all granted </Directory> ServerSignature On </VirtualHost> EOM PASSWD=$(RANDFILE=/dev/null openssl rand -base64 32 | tr -Cd A-Za-z) export PASSWD cat << EOM > /usr/local/www/observium/config.php <?php # define("OBS_DEBUG", 100); \$config['db_host'] = 'localhost'; \$config['db_user'] = 'observium'; \$config['db_pass'] = ‘$PASSWD'; \$config['db_name'] = 'observium'; \$config['install_dir'] = "/usr/local/www/observium"; \$config['snmp']['internal'] = FALSE; \$config['snmp']['community'] = array("public"); \$config['rrdtool'] = "/usr/local/bin/rrdtool"; \$config['fping'] = "/usr/local/sbin/fping"; \$config['fping6'] = "/usr/local/sbin/fping6"; \$config['snmpwalk'] = "/usr/local/bin/snmpwalk"; \$config['snmpget'] = "/usr/local/bin/snmpget"; \$config['snmpbulkget'] = "/usr/local/bin/snmpbulkget"; \$config['snmpbulkwalk'] = "/usr/local/bin/snmpbulkwalk"; \$config['snmptranslate'] = "/usr/local/bin/snmptranslate"; \$config['mtr'] = "/usr/local/sbin/mtr"; \$config['nmap'] = "/usr/local/bin/nmap"; \$config['nagios_plugins'] = "/usr/lib/nagios/plugins"; \$config['ipmitool'] = "/usr/local/bin/ipmitool"; \$config['virsh'] = "/usr/local/bin/virsh"; \$config['dot'] = "/usr/local/bin/dot"; \$config['unflatten'] = "/usr/local/bin/unflatten"; \$config['neato'] = "/usr/local/bin/neato"; \$config['sfdp'] = "/usr/local/bin/sfdp"; \$config['svn'] = "/usr/local/bin/svn"; \$config['wmic'] = "/usr/local//bin/wmic"; EOM /usr/local/etc/rc.d/mysql-server onestart /usr/local/etc/rc.d/apache24 onestart cd /usr/local/www/observium rm -rf logs rrd mkdir logs rrd chown www:www rrd logs cat <<EOM | mysql CREATE DATABASE observium DEFAULT CHARACTER SET utf8 COLLATE utf8_general_ci; GRANT ALL PRIVILEGES ON observium.* TO 'observium'@'localhost' IDENTIFIED BY ‘$PASSWD'; SET GLOBAL sql_mode = ''; EOM ADMIN_PASSWD=$(RANDFILE=/dev/null openssl rand -base64 32 | tr -Cd A-Za-z) export ADMIN_PASSWD sudo -u www ./discovery.php -u sudo -u www ./adduser.php admin $ADMIN_PASSWD 10 sudo -u www ./discovery.php -h all -d sudo -u www ./poller.php -h all -d cat << EOM >> /etc/crontab 33 */6 * * * www cd /usr/local/www/observium && /usr/local/bin/php discovery.php -h all */5 * * * * www cd /usr/local/www/observium && /usr/local/bin/php discovery.php -h new */5 * * * * www cd /usr/local/www/observium && /usr/local/bin/php poller.php -h all EOM echo Admin password: $ADMIN_PASSWD echo echo Be sure to include below in rc.conf if so desired. echo echo " apache24_enable=YES" echo " mysql_enable=YES" echo echo Depending on your setup - mod_rewrite (in /usr/local/apache24/httpd.conf) may also need to be activated. echo exit 0

2 3

Single box scalability/sizing?
by Steve Costaras 04 Feb '16

04 Feb '16

We currently have ~500 devices/50,000 ports being monitored on a dual cpu E5-2643 v0 system. It's currently running around 80% cpu (all cores w/ hyper-threading) and on a raid-10 16 drive array (sas 2.5" 10K rpm) which averages 1k iops. Most systems are polled in < 5minutes (with about 5-10 taking longer as they're fully loaded boxes). Looking to plan for future growth, I'm trying to see if anyone is running larger installations and their performance on a single box in trying to gauge if it's worthwhile to spend the $$ to upgrade to a newer V3 cpu system, or if we've effectively reached a single-point saturation limit and have to deploy distributed. I.e. do we have anyone here running say 1500 devices or 150,000 - 200,000 ports on a single system? If so, care to share your specs? Thanks. Steve

3 3

Re: [Observium] SNMP Trap based Notifications
by Moerman, Maarten 04 Feb '16

04 Feb '16

I'm having Adam built syslog alerting for me. Unfortunately, not done yet… -- Maarten Moerman | Mgr, Network Engineering | eBay Classifieds | +31-655122247 | mmoerman(a)ebay.com From: observium on behalf of Gagandeep Mann Reply-To: Observium Network Observation System Date: Monday, February 1, 2016 at 1:11 PM To: "observium(a)observium.org<mailto:observium@observium.org>" Subject: [Observium] SNMP Trap based Notifications Is there any way to configure OSPF Link Down Alert/Notification. Can we generate Notifications based on SNMP traps or any alternate based on Syslog. Best regards Gagandeep Mann ________________________________ This E-Mail may contain Confidential and/or legally privileged Information and is meant for the intended recipient(s) only. If you have received this e-mail in error and are not the intended recipient/s, Kindly notify the sender and then delete this e-mail immediately from your system. You are also hereby notified that any use, any form of reproduction, dissemination, copying, disclosure, modification, distribution and/or publication of this e-mail, its contents or its attachment/s other than by its intended recipient/s is strictly prohibited and may be unlawful. Internet Communications cannot be guaranteed to be secure or error-free as information could be delayed, intercepted, corrupted, lost, or contain viruses. Sistema Shyam Teleservices Limited does not accept any liability for any errors, omissions, viruses or computer problems experienced by any recipient as a result of this e-mail.

1 0

Re: [Observium] Images in alerts
by Gumilar Siegfried 04 Feb '16

04 Feb '16

Same Problem here with Outlook (2010). Was anyone able to fix this? I tried a lot of settings in Outlook but wasn’t able to display the images… Yeah, Outlook also blocks base64 images /Markus Den 29 jan. 2016 7:42 fm skrev "Ben Hohnke" <settra+observium(a)gmail.com<mailto:settra%2Bobservium@gmail.com>>: Fwiw I've never had them work in outlook either. They work on mobile though Ben On Fri, 29 Jan 2016 16:29 Anders Johansson <Anders.Johansson(a)direktorn.com<mailto:Anders.Johansson@direktorn.com>> wrote: Hi, I've seen that alerts include an image, base encoded in the actual html file, but the image is never displayed. Now I'm using that Redmond build software to read mails, perhaps that's why it's not working? Anyone else with outlook who can see the graph included in the alerts? //Anders _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

6 5

Re: [Observium] duplicate entries in vminfo table . [SEC=UNCLASSIFIED]
by Christian Gerbrandt 04 Feb '16

04 Feb '16

I have the same with our monitoring. All the vmware servers show all vms twice. On Feb 02, 2016, at 11:48 PM, Peter.Hine(a)familycourt.gov.au wrote: vCE 0.16.1.7533 going to the VMs tab of a vmWare server shows duplicate entries. hunting this down in the code shows the following in html/pages/device/vm.inc.php foreach (dbFetchRows("SELECT * FROM vminfo WHERE device_id = ? ORDER BY vm_name", array($device['device_id'])) as $vm) { print_vm_row($vm, $device); } so running it on the command line echo 'SELECT * FROM vminfo WHERE device_id = '586' ORDER BY vm_name' | mysql --user=observium --password=not_my_pass observium reveals the entries to be duplicated in the table. they all seem to have the last field as a difference. there must be something missing in the code for adding the entries to not find the first entries and update them. " 2586 586 vmware cbr-desktop E: tools not running 3072 2 powered off 4239aa20-542a-f088-dedf-afb508da6a9c NULL 2757 586 vmware cbr-desktop E: tools not running 3072 2 powered off 4239aa20-542a-f088-dedf-afb508da6a9c vmware-snmp " either NULL or vmware-snmp. Can someone in the Team give me a sql to remove the bad rows ? thanks Peter Hine Senior Technical Support Engineer (Servers) FCoA ITS peter.hine(a)familycourt.gov.au ********************************************************************** The information contained in this e-mail (including any attachments) is for the exclusive use of the addressee. If you are not the intended recipient please notify the sender immediately and delete this e-mail. It is noted that legal privilege is not waived because you have read this e-mail. ********************************************************************** _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

4 3

Combining multiple custom OIDs into one graph.
by T-MONT Administrator 04 Feb '16

04 Feb '16

Hi guys, I have a question regarding custom OIDs feature: current approach is to have an OID and combine its values pulled from multiple hosts into one graph. Is (or will be) opposite approach possible - to combine multiple OIDs values pulled from the same host into one graph? Thanks! Regards, Pawel

1 0

Set fixed scale of Y-axis on mini-graphs?
by Henrik Cednert (Filmlance) 04 Feb '16

04 Feb '16

Hello I'd like to set fixed values of the Y axis on the minigraphs. Is that possible? I don't find much value of the adaptive scaling since it means I have to read the AXIS and not only throw a quick eye at it to see anomalies. Cheers and thans -- Henrik Cednert cto | td | compositor Filmlance International Direct + 46 (0)704 71 89 54

1 0

Excluding servers from alert checks
by Matt Zillmann 04 Feb '16

04 Feb '16

Hello everyone, I am working towards excluding certain servers from a mempool check. I cannot seem to get the device matching to work. Has anyone gotten an exclusion to work? Thanks, Matt.

2 2

f5 BIG-IP Alarm
by Anders Johansson 04 Feb '16

04 Feb '16

Gents, I’m trying to trigger an event based upon availability in the ”load balancer” section, trying to find a variable in the device data that I can trigger on. Basically I want to trigger if a Virtual Server is down, or if the HA status change. All that is visible in the GUI but not sure if I can create a trigger for it in the Alarm section, possible? //Anders

4 4

Feature or bug -- 0.16.1.7533 version - naming of connected port of known device reverts to Mac address.
by Dirk-Willem van Gulik 03 Feb '16

03 Feb '16

In below devices/port display - we get for Slot0/21 the connected “port” on “device”. - i.e. eth0 on Ypenburg. However for Slot0/24 we get ’10’ on <macaddress>. Even though that actual port is called ‘Slot0/10’ on ‘Fooburg’ and known to Observium. Not sure if this is intentional - or the side effect from some LLCP discovery process gone awry. Dw.

1 0

Previous months Traffic Accounting?
by John May 03 Feb '16

03 Feb '16

Is it possible to have Observium store/generate more than one previous month of Traffic Accounting reports? - John -- ------------------------------------------------------------------- John May : President http://www.pointinspace.com/ Point In Space Internet Solutions 800.664.8610 919.338.8198 Professional FileMaker Pro, MySQL, PHP & Lasso Hosting on shared, virtual and hardware dedicated servers

2 5

duplicate entries in vminfo table . [SEC=UNCLASSIFIED]
by Peter.Hine＠familycourt.gov.au 03 Feb '16

03 Feb '16

vCE 0.16.1.7533 going to the VMs tab of a vmWare server shows duplicate entries. hunting this down in the code shows the following in html/pages/device/vm.inc.php foreach (dbFetchRows("SELECT * FROM vminfo WHERE device_id = ? ORDER BY vm_name", array($device['device_id'])) as $vm) { print_vm_row($vm, $device); } so running it on the command line echo 'SELECT * FROM vminfo WHERE device_id = '586' ORDER BY vm_name' | mysql --user=observium --password=not_my_pass observium reveals the entries to be duplicated in the table. they all seem to have the last field as a difference. there must be something missing in the code for adding the entries to not find the first entries and update them. " 2586 586 vmware cbr-desktop E: tools not running 3072 2 powered off 4239aa20-542a-f088-dedf-afb508da6a9c NULL 2757 586 vmware cbr-desktop E: tools not running 3072 2 powered off 4239aa20-542a-f088-dedf-afb508da6a9c vmware-snmp " either NULL or vmware-snmp. Can someone in the Team give me a sql to remove the bad rows ? thanks Peter Hine Senior Technical Support Engineer (Servers) FCoA ITS peter.hine(a)familycourt.gov.au ********************************************************************** The information contained in this e-mail (including any attachments) is for the exclusive use of the addressee. If you are not the intended recipient please notify the sender immediately and delete this e-mail. It is noted that legal privilege is not waived because you have read this e-mail. **********************************************************************

2 3

after SVN updatw
by Nick Morgan 03 Feb '16

03 Feb '16

Hi, Im getting the following trying to run ./discovery –none after updating via SVN pureblue@observe:~$ cd observium pureblue@observe:~/observium$ ./discovery.php -none PHP Fatal error: require(): Failed opening required '/home/pureblue/observium/config.php' (include_path='.:/usr/share/php:/usr/share/pear') in /home/pureblue/observium/includes/sql-config.inc.php on line 26 pureblue@observe:~/observium$ Anyone point me in the right direction? Kind Regards

4 3

Re: [Observium] cdp neighbor and mac address questions
by Thedude 02 Feb '16

02 Feb '16

No, I get the exact same thing. Curious as to what the fix is. Sent from my Verizon Wireless 4G LTE DROID On Feb 2, 2016 7:19 AM, Randy Mahurin <randymahurin(a)boisestate.edu> wrote: > > Hello, > > I've just completed a new install of Observium, version 0.16.1.7535 (27th January 2016), and have a couple of questions in hopes that someone can point me to the correct debugging process. > > 1) The mac address information on the port is of the port itself, rather than the connected device. We are strictly Cisco in our switching, most are 2960 variety with some 3750 and 3850 mixed in. I see in the demo software, the mac address on the port pages shows that of the client. Also, several months ago, we ran a small version of Observium (since decommissioned) and the client mac populated. > > 2) Auto discovery based on CDP seems really sporadic, several neighbors will be added, but some will not. SNMP settings are the same across the board and CDP discovered neighbors can be added manually without issue. > > Is there any chance someone has come across these before? > > Thank you > > > -- > Randy Mahurin > Office of Information Technology > Boise State University > 1910 University Drive, Boise, ID, 83725-1249 > Phone: (208) 426-4003

2 1

cdp neighbor and mac address questions
by Randy Mahurin 02 Feb '16

02 Feb '16

Hello, I've just completed a new install of Observium, version 0.16.1.7535 (27th January 2016), and have a couple of questions in hopes that someone can point me to the correct debugging process. 1) The mac address information on the port is of the port itself, rather than the connected device. We are strictly Cisco in our switching, most are 2960 variety with some 3750 and 3850 mixed in. I see in the demo software, the mac address on the port pages shows that of the client. Also, several months ago, we ran a small version of Observium (since decommissioned) and the client mac populated. 2) Auto discovery based on CDP seems really sporadic, several neighbors will be added, but some will not. SNMP settings are the same across the board and CDP discovered neighbors can be added manually without issue. Is there any chance someone has come across these before? Thank you -- Randy Mahurin Office of Information Technology Boise State University 1910 University Drive, Boise, ID, 83725-1249 Phone: (208) 426-4003

1 0

Some questions regarding Observium
by Jens.Altrock＠STADT-NW.DE 02 Feb '16

02 Feb '16

Hey guys, Have some questions I haven't found answers yet :-/ 1. Read about someone requesting checking and alerting of (os) services, is this already implemented or will it be? 2. Any chance to get to know about new community versions? Couldn't find something on website :-/ 3. Some of our switches have kind of leaks in their graphiocs (see pic on mail, from an ATI 8000GS/24POE). Not sure where this comes from, any ideas? Maybe any debug ideas? Haven't found any special events in Eventlog (except some SNMP down/up errors) Thanks fort he help, and sorry if questions are a bit dumb. Regards, Jens Wichtiger Hinweis f?r Mitteilungen an die Stadtverwaltung Neustadt: F?r die rechtsverbindliche elektronische Kommunikation mit der Stadtverwaltung Neustadt an der Weinstra?e steht Ihnen ausschlie?lich folgende E-Mail-Adresse zur Verf?gung: stv-neustadt-weinstrasse(a)poststelle.rlp.de Bitte beachten Sie unsere Hinweise unter http://www.neustadt.eu/impressum#email

1 0

Observium impact on Juniper CPUs
by Raphael Maunier 02 Feb '16

02 Feb '16

Folks, Just sharing experience using Observium and Juniper EX / MX equipments. I exchanged with Adam and Juniper tac about some issues on some EX4550 having CPU at 100% with no result in solving the issue with a log of tweak in Observium / Junos . I changed the server 3 days ago, faster stronger better :) And voila , CPU dropped on all devices, with the same config.php ! The previous one was not a small server ( aka VM ) but the vm was not as strong as this one. I only had the issue with Juniper equipment not with cisco / Arista . So if you are facing the same issue ( and I exchanged with a few of you ) , you know what to do :) Raphael PS : I still have some EX4550 deleting interfaces from time to time, but I will open another thread !

1 0

RRD failures
by Joey Stanford 02 Feb '16

02 Feb '16

Howdy, Recently RRD graphs (created by Smokeping) have stopped working. The RRD files are still there and being generated. They display correctly in Smokeping. config.php is unchanged and correct. &debug=1 or a particular setting gives me RRD CMD[%ygraph —daemon unix:/var/run/rrdcached.sock /tmp/cYlMIYCEzB411tYX.png -Y --lower-limit 0 --alt-autoscale-max --rigid --start 1454281028 --end 1454367428 --width 1152 --height 300 -c BACK#EEEEEE00 -c SHADEA#EEEEEE00 -c SHADEB#EEEEEE00 -c FONT#000000 -c CANVAS#FFFFFF00 -c GRID#a5a5a5 -c MGRID#FF9999 -c FRAME#5e5e5e -c ARROW#5e5e5e -R normal --font LEGEND:8:'DroidSansMono,DejaVuSansMono' --font AXIS:7:'DroidSansMono,DejaVuSansMono' --font-render-mode normal -E COMMENT:' RTT Loss SDev RTT\:SDev\l' DEF:median0=/var/lib/smokeping/Observium/10_30_90_100.rrd:median:AVERAGE CDEF:dm0=median0,UN,0,median0,IF DEF:loss0=/var/lib/smokeping/Observium/10_30_90_100.rrd:loss:AVERAGE CDEF:ploss0=loss0,20,/,100,* DEF:pin0p1=/var/lib/smokeping/Observium/10_30_90_100.rrd:ping1:AVERAGE CDEF:p0p1=pin0p1,UN,0,pin0p1,IF DEF:pin0p2=/var/lib/smokeping/Observium/10_30_90_100.rrd:ping2:AVERAGE CDEF:p0p2=pin0p2,UN,0,pin0p2,IF DEF:pin0p3=/var/lib/smokeping/Observium/10_30_90_100.rrd:ping3:AVERAGE CDEF:p0p3=pin0p3,UN,0,pin0p3,IF DEF:pin0p4=/var/lib/smokeping/Observium/10_30_90_100.rrd:ping4:AVERAGE CDEF:p0p4=pin0p4,UN,0,pin0p4,IF DEF:pin0p5=/var/lib/smokeping/Observium/10_30_90_100.rrd:ping5:AVERAGE CDEF:p0p5=pin0p5,UN,0,pin0p5,IF DEF:pin0p6=/var/lib/smokeping/Observium/10_30_90_100.rrd:ping6:AVERAGE CDEF:p0p6=pin0p6,UN,0,pin0p6,IF DEF:pin0p7=/var/lib/smokeping/Observium/10_30_90_100.rrd:ping7:AVERAGE CDEF:p0p7=pin0p7,UN,0,pin0p7,IF DEF:pin0p8=/var/lib/smokeping/Observium/10_30_90_100.rrd:ping8:AVERAGE CDEF:p0p8=pin0p8,UN,0,pin0p8,IF DEF:pin0p9=/var/lib/smokeping/Observium/10_30_90_100.rrd:ping9:AVERAGE CDEF:p0p9=pin0p9,UN,0,pin0p9,IF DEF:pin0p10=/var/lib/smokeping/Observium/10_30_90_100.rrd:ping10:AVERAGE CDEF:p0p10=pin0p10,UN,0,pin0p10,IF DEF:pin0p11=/var/lib/smokeping/Observium/10_30_90_100.rrd:ping11:AVERAGE CDEF:p0p11=pin0p11,UN,0,pin0p11,IF DEF:pin0p12=/var/lib/smokeping/Observium/10_30_90_100.rrd:ping12:AVERAGE CDEF:p0p12=pin0p12,UN,0,pin0p12,IF DEF:pin0p13=/var/lib/smokeping/Observium/10_30_90_100.rrd:ping13:AVERAGE CDEF:p0p13=pin0p13,UN,0,pin0p13,IF DEF:pin0p14=/var/lib/smokeping/Observium/10_30_90_100.rrd:ping14:AVERAGE CDEF:p0p14=pin0p14,UN,0,pin0p14,IF DEF:pin0p15=/var/lib/smokeping/Observium/10_30_90_100.rrd:ping15:AVERAGE CDEF:p0p15=pin0p15,UN,0,pin0p15,IF DEF:pin0p16=/var/lib/smokeping/Observium/10_30_90_100.rrd:ping16:AVERAGE CDEF:p0p16=pin0p16,UN,0,pin0p16,IF DEF:pin0p17=/var/lib/smokeping/Observium/10_30_90_100.rrd:ping17:AVERAGE CDEF:p0p17=pin0p17,UN,0,pin0p17,IF DEF:pin0p18=/var/lib/smokeping/Observium/10_30_90_100.rrd:ping18:AVERAGE CDEF:p0p18=pin0p18,UN,0,pin0p18,IF DEF:pin0p19=/var/lib/smokeping/Observium/10_30_90_100.rrd:ping19:AVERAGE CDEF:p0p19=pin0p19,UN,0,pin0p19,IF DEF:pin0p20=/var/lib/smokeping/Observium/10_30_90_100.rrd:ping20:AVERAGE CDEF:p0p20=pin0p20,UN,0,pin0p20,IF CDEF:pings0=20,p0p1,UN,p0p2,UN,+,p0p3,UN,+,p0p4,UN,+,p0p5,UN,+,p0p6,UN,+,p0p7,UN,+,p0p8,UN,+,p0p9,UN,+,p0p10,UN,+,p0p11,UN,+,p0p12,UN,+,p0p13,UN,+,p0p14,UN,+,p0p15,UN,+,p0p16,UN,+,p0p17,UN,+,p0p18,UN,+,p0p19,UN,+,p0p20,UN,+,- CDEF:m0=p0p1,p0p2,+,p0p3,+,p0p4,+,p0p5,+,p0p6,+,p0p7,+,p0p8,+,p0p9,+,p0p10,+,p0p11,+,p0p12,+,p0p13,+,p0p14,+,p0p15,+,p0p16,+,p0p17,+,p0p18,+,p0p19,+,p0p20,+,pings0,/ CDEF:sdev0=p0p1,m0,-,DUP,*,p0p2,m0,-,DUP,*,+,p0p3,m0,-,DUP,*,+,p0p4,m0,-,DUP,*,+,p0p5,m0,-,DUP,*,+,p0p6,m0,-,DUP,*,+,p0p7,m0,-,DUP,*,+,p0p8,m0,-,DUP,*,+,p0p9,m0,-,DUP,*,+,p0p10,m0,-,DUP,*,+,p0p11,m0,-,DUP,*,+,p0p12,m0,-,DUP,*,+,p0p13,m0,-,DUP,*,+,p0p14,m0,-,DUP,*,+,p0p15,m0,-,DUP,*,+,p0p16,m0,-,DUP,*,+,p0p17,m0,-,DUP,*,+,p0p18,m0,-,DUP,*,+,p0p19,m0,-,DUP,*,+,p0p20,m0,-,DUP,*,+,pings0,/,SQRT CDEF:dmlow0=dm0,sdev0,2,/,- CDEF:s2d0=sdev0 CDEF:ploss_all=0,ploss0,+,1,/ CDEF:dm_all=0,dm0,+,1,/ CDEF:sd_all=0,s2d0,+,1,/ CDEF:dmlow_all=dm_all,sd_all,2,/,- AREA:dmlow_all AREA:sd_all#AAAAAA::STACK LINE1:dm_all#CC0000:'Average ' VDEF:avmed=dm_all,AVERAGE VDEF:avsd=sd_all,AVERAGE CDEF:msr=dm_all,POP,avmed,avsd,/ VDEF:avmsr=msr,AVERAGE GPRINT:avmed:'%5.1lf%ss' GPRINT:ploss_all:AVERAGE:'%5.1lf%%' GPRINT:avsd:'%5.1lf%Ss' GPRINT:avmsr:'%5.1lf%s\l'%n] × RRD RUNTIME[0.0471s] RRD STDOUT[ERROR: rrdc_flush (/var/lib/smokeping/Observium/10_30_90_100.rrd) failed with status -1.] RRD_STATUS[FALSE] The path listed above is correct. e.g. $ ls -al /var/lib/smokeping/Observium/10_30_90_100.rrd -rw-r—r— 1 smokeping smokeping 2986808 Feb 1 16:01 /var/lib/smokeping/Observium/10_30_90_100.rrd I did some googling and found that rrdc is for RRD Cache which I was running. I had installed it per http://blog.best-practice.se/2014/10/using-rrdcached-with-observium.html I’ve apt-get purge rrdcache, commented out the config.php entry, rebooted, and now I have no graphs (but I do have .rrd files). I’m wondering if anyone could give me some pointers as to where to go next. Thanks, Joey

1 1

VMs Tab missing
by Matt Zillmann 02 Feb '16

02 Feb '16

Hello everyone, I am having a bizarre issue with one of my hosts. I have a cluster of hosts for a VMware ESXI 6 environment and have discovered and polled them successfully. However, there is one host that is not displaying the VMs tab. Has anyone had a similar issue before? I have the latest version of the subscription edition of Observium running on CentOS7. Thanks, Matt.

1 0

Alerts for QNAP storage
by Matt Zillmann 02 Feb '16

02 Feb '16

Hello all, I am working on setting up alerting for a QNAP storage device. I have the latest version of the subscription version of Observium. What I would like is to be able to have Observium send me an email when a hard drive fails. The drives show up under the status portion of the device page. Any idea of how to set this up (if possible)? Thanks, Matt.

1 0

Re: [Observium] Bogus Sensor Alerts?
by Christian Gerbrandt 01 Feb '16

01 Feb '16

Did some tweaking. When I click on the link, this is the URL which opens: /health/metric=sensors/event=alert%2Cwarning/ Showing nothing. Same for ignored: /health/metric=sensors/event=ignore/ But when I change the URL a bit like this: /health/metric=sensors/state=Down I can see the 12 alerts (which are from a Device I ignore anyway). Changed the polling as well now so they are no longer reported. But it looks like there is a problem with the URL being created on the main overview page. On Feb 01, 2016, at 02:41 PM, Christian Gerbrandt <derchris(a)me.com> wrote: Hi, Today I checked some stuff in Observium. I can see the overview on the main page for Devices, Ports and Sensors. With the Sensors it is showing me 12 alert in the Down column. Clicking on the link doesn't show anything. Checking all Sensors, I can see some in red, but only 4 in total. Anyone knows what this is, or how I can get this fixed. Thanks, Christian

1 0

observium and Sophos Puremessage MIBS
by Watson Kamanga 01 Feb '16

01 Feb '16

HI Any one monitoring Sophos Puremessage using observium . I will to like to display all the other telemetry from the box , at the moment all i have is ping response . Regards Watson

1 0

Bogus Sensor Alerts?
by Christian Gerbrandt 01 Feb '16

01 Feb '16

Hi, Today I checked some stuff in Observium. I can see the overview on the main page for Devices, Ports and Sensors. With the Sensors it is showing me 12 alert in the Down column. Clicking on the link doesn't show anything. Checking all Sensors, I can see some in red, but only 4 in total. Anyone knows what this is, or how I can get this fixed. Thanks, Christian

1 0

SNMP Error
by Andrew Colin 01 Feb '16

01 Feb '16

Hi Guys Since the latest update on the pro edition on 2 debian servers we get the following when Observium tryies to walk to them They are running Debian 7.9 3.10.0-8-pve imuxsock begins to drop messages from pid 12028 due to rate-limiting now Observium is unable to query them any ideas why?

2 3

switch missing interface data
by Simon Smith 01 Feb '16

01 Feb '16

Hi All not sure if this is a bug or maybe something wrong with our switch? we added a TP-Link 8 port gigabit switch to monitor as we wanted to see what data we could get for some reason, observium has listed all interfaces as Ethernet Interface ? also it appears the vlans are also being found as lans, as well ? no port 1 port 2 etc just Ethernet Interface and Vlan ? what ive also found is on the interfaces page the plans are showing these blue arrows with the ethernet interface name ? never seen it before? any ideas? attached is screenshots, poller log and discovery log if people what help :) Simon

2 2