- observium - lists.observium.org

Alerts options
by Andrea 23 Dec '15

23 Dec '15

Hi, I'm interested in the professional edition to activate alerts, but I didn't understand exactly what it's possible to configure. I have 2 questions about them: 1) Is it possible to configure checks only every 5 minutes, or is there some way to configure some devices to be polled for example every 30 seconds only for some specific check? 2) Is it possible to monitor and set alerts only about snmp checks, or is there some way to configure monitor and alerts about tcp/udp query? For example to check if http/smtp/pop3/imap ports are working? Thanks! Andrea

2 1

SNMP Query AIX Host
by FalkE 23 Dec '15

23 Dec '15

Hello everybody, I'm exploring Observium for a few days now and I really like it! I've added some Linux hosts using SNMP and it works like a charm. However, in conjuntion with IBM AIX, I got some problems: Using SNMP, I only get very basic information about OS level and network interfaces. There is no data about cpu, memory and storage usage. I'm using SNMPv1 for now. Could this be the problem? Is some data only available for v2c and v3? If so, can someone give me a sample configuration for SNMPv2c or SNMPv3 on AIX? Kind regards, Manuel

4 9

Unix Agent and Raspberry Pi
by gt＠gt1.net 22 Dec '15

22 Dec '15

Hello, I set up Observium to monitor a RPi device with Unix Agent and RPi script. I see the hardware sensors from RPi on the Observium interface, however all of them show zero values. When running /usr/bin/observium-agent on the RPi, all sensor data is displayed in the dump, but when I try telnet RPi 36602 from the server, the sensor data in the dump shows 0s. What could be the issue? Gennadiy.

1 0

How to shush alarms for sensors that lie...
by Robert Williams 21 Dec '15

21 Dec '15

Hi, The recent changes to the homepage layout have placed more attention on the summary statistics (alerted ports, alerted sensors etc.) which previously were not as visible. A positive side-effect of this has been the setting of more 'appropriate' manual thresholds for many of the less important sensors, to tidy them up. It has revealed one issue though, which I'm not sure how to work around. Take the following example: As you can see, the (unrealistic) dBm being reported by the Cisco chassis is stuck in a 'warning' state, despite having alarms disabled, the threshold on manual and thresholds set well clear of the 8.1dBm which it is reporting. (This port actually has a copper-converter in it, hence, the dBm is just rubbish spat out by an adapter which doesn't understand copper) So despite my best efforts to silence this warning, it still persists as a 'down' sensor, on the summary page showing up in red. (Not ignored, but actually down). We have quite a few of these adapters as well as a large number of voltage sensors (again, courtesy Cisco entity SNMP crapness) which are being reported as zero volts. These are also set to 'ignore' but continue to show as 'down' on the new summary homepage, some examples below: So - Does anyone know how I can totally and completely ignore/hide the broken sensors like these? Cheers! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

1 1

Re: [Observium] Layout & Style Changes
by Kent Johannessen 21 Dec '15

21 Dec '15

Hi Adam, I am all for a flat design, which is the modern thing today (apparently:)). Some thoughts from me. Background: Does not make the site look good. Sorry. Have a color as previously, or maybe something like the grid background from before (probably a year ago). Icons: Removal of icons, maybe mostly in the device page makes it hard to quickly identify what you are looking for. (reading is boring). Right panel: I see some use for this. But should also be able to disable. Device page: On some resolutions it seems to create three rows, which make the right side too cramped. Had some more thoughts earlier today, but too late now to remember all :D Are there any plans to move completely to bootstrap 3? Best regards NOTICE: Please immediately e-mail back to sender if you are not the intended recipient. Thereafter delete the e-mail along with any attachments without making copies. The sender reserves all rights of privilege, confidentiality and copyright.

4 6

join ports together
by Simon Smith 18 Dec '15

18 Dec '15

Hi All, this is a bit of a daft question, I actually deleted one of our bridges on our mikrotik switches, and had to recreate them, DOH! the observium, then discovered the new bridge, but deleted the old bridge (marked as deleted)? now i have no graphs with old data in them for the new bridge :( can i join the new bridge and old bridge ports together in observium so i can see the old graphs in the new bridge? regards Simon

4 6

Layout & Style Changes
by Adam Armstrong 18 Dec '15

18 Dec '15

Hi All, Those of you running trunk and updating regularly might have noticed some layout/style changes in the past day or two. We've been running the old "shiny" style for about 3 years and thought it was about time we updated it, and have opted for a more "flat" design. Simplifying the stylistic elements has made it a bit easier for us to do certain things, since the old style was a little clumsy on things like horizontal boxes (check out the docs side bar for proof!). We've also added a wide layout for screens of ~1920 pixels wide which we plan to move some data too. This can already been seen on the /device/ /devices/ and /ports/ page, where some data, graphs and search forms are moved to the left hand pane. If anyone has any suggestions on what should/could go in that pane on various pages, now is the time to suggest it. Similarly any suggestions on the new styling should also be made now, before we move on to something else! :) Thanks, adam.

1 0

Observium and PHP7
by Markus Klock 18 Dec '15

18 Dec '15

Good news everyone! PHP7 is out and promise great performance to all PHP-applications. I tried it out this weekend on my Observium-installation and it did not disappoint! I have a rather large Observium and some of you that runs very large installations may have noticed that the web UI can get a little slow when rendering all the stuff from a large database. In my case the overview-page loads in about 5s and some of the more heavy pages like /devices/ takes about 7s to load. Well after upgrading to PHP7 my page loadtimes are now down to <1.5s for almost any page and atleast <2s for the heavy ones, I got a 2-3x performance boost! If you want to try it out I made a quick guide on how to run Observium on PHP7 here: http://blog.best-practice.se/2015/12/vastly-improve-observium-performance.h… Note that I don't know if everything in Observium is fully compatible with PHP7, I tried as many features as I could think of with no problems, however I have not tried the billing-module. Even if most of you don't have need for a speedup in the web UI, its great to see PHP improve performance like this. This means Observium will be able to scale even further in the future :) /Markus

4 10

grid not centre aligned
by Simon Smith 18 Dec '15

18 Dec '15

Hi All, another bug again, the screen is not centre aligned? its happening in chrome and firefox? also the new layout and style in my view is horrible, I preferred the old version! why u have to update :( regards Simon

3 6

Cisco 887VA - No OSPF Graphs
by Federico Olivieri 18 Dec '15

18 Dec '15

Hi all, I have just enabled OSPF between a Cisco 887VA running c880data-universalk9-mz.154-3.M4 and a Cisco 3750 c3750-ipservicesk9-mz.122-55.SE9. I can see the OSPF process on Observium for Cisco 3750 but nothing for Cisco 887 I tried to get some debug on router and that what I got (not sure if can be useful or not) Dec 16 11:15:09.002: SNMP: Response, reqid 1755104544, errstat 0, erridx 0 ospfGeneralGroup.1.0 = 192.168.0.1 ospfGeneralGroup.2.0 = 1 ospfGeneralGroup.3.0 = 2 ospfGeneralGroup.4.0 = 2 ospfGeneralGroup.5.0 = 1 ospfGeneralGroup.6.0 = 1 ospfGeneralGroup.7.0 = 9505 ospfGeneralGroup.8.0 = 2 ospfGeneralGroup.9.0 = 4 ospfGeneralGroup.10.0 = 3 Dec 16 11:15:09.042: SNMP: Packet sent via UDP to 192.168.0.3 process_mgmt_req_int: UDP packet being de-queued Anyone has experienced something similar? Any suggestion? Thank you Regards, Federico

3 12

Duplicate entry in applications table
by Simon Smith 18 Dec '15

18 Dec '15

Hi All, not sure if ive found a bug or something is wrong on my server that is being monitored in my db.log I’m getting [2015/12/17 17:05:10 +0000] poller.php(6976): Failed dbQuery (#1062 - Duplicate entry '64-apache-' for key 'dev_type_inst'), Query: INSERT INTO `applications` (`device_id`,`app_type`,`app_instance`) VALUES ('64','apache','') [2015/12/17 17:05:10 +0000] poller.php(6976): Failed dbQuery (#1062 - Duplicate entry '64-freeradius-' for key 'dev_type_inst'), Query: INSERT INTO `applications` (`device_id`,`app_type`,`app_instance`) VALUES ('64','freeradius','') [2015/12/17 17:05:10 +0000] poller.php(6976): Failed dbQuery (#1062 - Duplicate entry '64-mysql-' for key 'dev_type_inst'), Query: INSERT INTO `applications` (`device_id`,`app_type`,`app_instance`) VALUES ('64','mysql','') [2015/12/17 17:09:23 +0000] poller.php(12106): Failed dbQuery (#1062 - Duplicate entry '64-apache-' for key 'dev_type_inst'), Query: INSERT INTO `applications` (`device_id`,`app_type`,`app_instance`) VALUES ('64','apache','') [2015/12/17 17:09:23 +0000] poller.php(12106): Failed dbQuery (#1062 - Duplicate entry '64-freeradius-' for key 'dev_type_inst'), Query: INSERT INTO `applications` (`device_id`,`app_type`,`app_instance`) VALUES ('64','freeradius','') [2015/12/17 17:09:24 +0000] poller.php(12106): Failed dbQuery (#1062 - Duplicate entry '64-mysql-' for key 'dev_type_inst'), Query: INSERT INTO `applications` (`device_id`,`app_type`,`app_instance`) VALUES ('64','mysql','') [2015/12/17 17:15:15 +0000] poller.php(17083): Failed dbQuery (#1062 - Duplicate entry '64-apache-' for key 'dev_type_inst'), Query: INSERT INTO `applications` (`device_id`,`app_type`,`app_instance`) VALUES ('64','apache','') [2015/12/17 17:15:15 +0000] poller.php(17083): Failed dbQuery (#1062 - Duplicate entry '64-freeradius-' for key 'dev_type_inst'), Query: INSERT INTO `applications` (`device_id`,`app_type`,`app_instance`) VALUES ('64','freeradius','') [2015/12/17 17:15:15 +0000] poller.php(17083): Failed dbQuery (#1062 - Duplicate entry '64-mysql-' for key 'dev_type_inst'), Query: INSERT INTO `applications` (`device_id`,`app_type`,`app_instance`) VALUES ('64','mysql','') currently the machine runs apache, freeradius, mysql, openvpn I’m using the unix agents ? and they are installed correctly in /usr/lib/observium_agent/local i can even execute them correctly and get data out from out observium server whats also weird is I’m getting data for openvpn, just not the other? i have deleted the table entrys, but they just re-appear, and then the logs appear again is the a bug possible? regards Simon

3 5

broken app (apache/mysql) integration
by Nils Podzich 18 Dec '15

18 Dec '15

Hello, I have some problems with the 7274 version and the apps. Especially with the mysql and apache app. Mailgraph seems to work fine, the others are not tested. The app script of mysql/apache seem to run fine, if I telnet to 36602 I get output which seems valid to me - and is similar to a release where apache is working. I have no working version of mysql for comparison at the moment. I think I narrowed to problem down. If I try to run the poller-script manually in debug there is an error ---snip--- SQL[SELECT * FROM `applications` WHERE `device_id` = '40' AND `app_type` = 'mysql'] SQL RUNTIME[0.00032902s] Including: applications/mysql.inc.php mysql SQL[SELECT * FROM `applications` WHERE `device_id` = '40' AND `app_type` = 'mysql' AND `app_instance` IS NULL] SQL RUNTIME[0.00021815s] + SQL[INSERT INTO `applications` (`device_id`,`app_type`,`app_instance`) VALUES ('40','mysql','')] SQL RUNTIME[0.00914192s] ERROR[Error in query: (Duplicate entry '40-mysql-' for key 'dev_type_inst') 1062] ---snip--- SQL[SELECT * FROM `applications` WHERE `device_id` = '38' AND `app_type` = 'apache'] SQL RUNTIME[0.00032187s] Including: applications/apache.inc.php apache SQL[SELECT * FROM `applications` WHERE `device_id` = '38' AND `app_type` = 'apache' AND `app_instance` IS NULL] SQL RUNTIME[0.00016117s] + SQL[INSERT INTO `applications` (`device_id`,`app_type`,`app_instance`) VALUES ('38','apache','')] SQL RUNTIME[0.00899100s] ERROR[Error in query: (Duplicate entry '38-apache-' for key 'dev_type_inst') 1062] ---snip--- The hosts are newly added. I also did a restore of the observium machine because I thought I somehow broke it by adding and testing... but the problems return with readding the hosts. The graphs are showing mainly nothing which is not surprising I think The grahics are there but no values.... I noticed that the demo installation shows similar problems or. graphics, at least for the mysql. Apache seems to work there which it doesn't for me. http://demo.observium.org/apps/app=mysql/ Additionally I have problems removing a group definition. When you click "delete" it always shows "edit" which it makes hard to remove the group because of a typo. Can anyone help me? Am I doing something wrong? Thank you, Best regards Nils

2 1

test_email.php
by Elmas, Murat 17 Dec '15

17 Dec '15

Hi, I'm trying to define e-mail alert using config.php file. I looked the page at http://www.observium.org/docs/config_options/ for configuration options. It says here I can try the settings using the test_mail.php but no test-email.php in observium folder. "SMTP specific options To test email settings use test_mail.php script from main observium dirrectory." What should I do ? Thanks in advance ?NL? & Co ve ba?l? ortakl?klar? hakk?nda daha fazla bilgi www.unluco.com adresinde mevcuttur. Kisiye ?zel bu mesaj ve i?eri?indeki bilgiler gizlidir. ?NL? & Co ve ba?l? ortakl?klar? ("?irket"), bu mesajin icerigi ve ekleri ile ilgili olarak hukuksal hi?bir sorumluluk kabul etmez. Yetkili al?c?lardan biri de?ilseniz, bu mesajin herhangi bir ?ekilde if?a edilmesi, kullan?lmas?, kopyalanmas?, yay?lmas? veya mesajda yeralan hususlarla ilgili olarak herhangi bir i?lem yap?lmas?n?n kesinlikle yasak oldu?unu bildiririz. B?yle bir durumda, l?tfen hemen mesaj?n g?ndericisini bilgilendiriniz ve mesaj? sisteminizden siliniz. ?irketimiz, internet ortam?nda g?nderilen e-posta mesajlar?n?n ve bilgilerinin size de?i?ikli?e u?rayarak veya ge? ula?mas?ndan, b?t?nl???n?n ve gizlili?inin korunamamas?ndan, vir?s i?ermesinden ve bilgisayar sisteminize verebilece?i herhangi bir zarardan sorumlu tutulamaz. More information on ?NL? & Co and its subsidiaries is available at www.unluco.com The information contained in this communication may contain confidential or legally privileged information. ?NL? & Co and its subsidiaries ("the Company") do not accept any legal responsibility for the contents and attachments of this message. If you are not the intended recipient you are hereby notified that any disclosure, use, copying, distribution or taking any action in reliance on the contents of this information is strictly prohibited. If you have received this communication in error, please notify the sender immediately by responding to this e-mail and then delete it from your system. The Company shall have no liability for any changes or late receiving, loss of integrity and confidentiality, viruses and any damages caused in anyway to your computer system.

5 7

Re: [Observium] update.php fails to run on latest svn release 7273
by Jason Scholl 17 Dec '15

17 Dec '15

That worked, thanks. I also see that update.php got updated so that it doesn't support direct calls, nice touch.

1 0

New alert options
by Anders Johansson 17 Dec '15

17 Dec '15

Hi, After upgrading to the latest Observium (pro) I've noticed a lot of new alerting destination options. Just curios. * Are they all implemented or just in UI? * If any are activated, how do I configure them? We have internal email to SMS gateways, would it be possible to create one that uses a specific SMS template? I'd like to keep my sms messages short and don't mind creating one myself. When I looked at the code last time it didn't seems to be to much trouble, but perhaps it easier know when some of the code might be written? //Anders

3 3

Re: [Observium] update.php fails to run on latest svn release 7273
by Jason Scholl 17 Dec '15

17 Dec '15

Deleting and re-syncing includes didn't work, though I was able to get it to run successfully by swapping these two lines in update.php include_once("includes/definitions.inc.php"); include("includes/functions.inc.php"); get_obs_attrib is defined in 'includes/common.inc.php', but that is only getting included into update.php through 'includes/functions.inc.php'.

2 1

update.php fails to run on latest svn release 7273
by Jason Scholl 16 Dec '15

16 Dec '15

I just attempted to upgrade to release 7273 and update.php fails to run. It gives no output (just return code 255), and logs nothing to update-errors.log or any other log file. My php skills are pretty weak, but a bit of "got here" debugging lead me through the following. includes/update/update.php 21: include_once("includes/definitions.inc.php"); #bailed on this line includes/definitions.inc.php 513: $rev_old = @get_obs_attrib('current_rev'); #bailed on this line I wasn't able to track it down any further than that because I couldn't even seem to get get_obs_attrib to execute. As a last ditch effort, I also tried commenting out all of my config except the absolutely required pieces, but it still failed in the same way. Is anyone else having this problem or have any ideas?

2 1

Contact Destination - Local file
by Spencer Ryan 16 Dec '15

16 Dec '15

Would it be possible to add a local file option to the providers for a contact? There are situations where we would like to manipulate the data with a script of our own based on triggered alerts and recoveries and instead of mucking around the DB by hand having Observium write out the alerts to a file would be the easiest. Maybe just have it take a path and just >> the alert contents to whatever the user enters? *Spencer Ryan* | Senior Systems Administrator | sryan(a)arbor.net *Arbor Networks* +1.734.794.5033 (d) | +1.734.846.2053 (m) www.arbornetworks.com

5 7

Not alerting (probably user fail)
by Robert Williams 16 Dec '15

16 Dec '15

Hi, We've just finished migrating some of our monitoring targets to an additional instance of Observium, everything is polling fine and all the historic data etc. has been moved OK. The only thing which remains broken is that none of the alerts are actually sending their emails. They do show as being in an alert state OK, for example: However, no actual 'Alerted' time is ever recorded - and no email is ever sent. The sendmail element works fine with: sendmail -vt < testmail.txt The test contains the correct FROM and DEFAULT from the config.php in Observium and this delivers fine. Problem is, it was a very long time ago that I originally configured Observium alerting on the first box and I'm probably missing something stupid. Relevant config sections below: Both of these sections are identical to the working system they were copied from, which works fine. The postfix config is also identical to the working server and I'm confident postfix is OK as the test from it are fine: myhostname = OBSERVIUM.x.y alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = OBSERVIUM, OBSERVIUM.x.y, localhost relayhost = 1.2.3.4 mailbox_size_limit = 0 recipient_delimiter = + Can anyone assist by pointing me at the switch I've obviously failed to turn on, or let me know what additional debugs I can provide to help track this? Cheers! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

2 2

Alerts, metrics and attributes for applications
by Alex Winder ＠ M5i 16 Dec '15

16 Dec '15

Hi everyone, Does anyone know if there are any attributes or metrics for the UNIX agent applications, in particular NGINX, MySQL, Apache, and PowerDNS Recursor. I'm looking to create some alert checkers for them if it's at all possible. The only information I can find about the attributes and metrics is the following: http://www.observium.org/docs/attribs_metrics/ https://github.com/mgmoerman/docs/blob/master/observium-alert-checkers.md Regards, Alex.

2 2

hd-screen goofed up
by Simon Smith 16 Dec '15

16 Dec '15

Hi Adam, oh dear, the HD update in revision 7264, has goofed up my screen :( Ive had a HDPI Macbook Pro 2012 for years now the issue only appears on servers page tho? i goto our mikrotik switches - fine, tp-links - fine, just not linux or windows servers attached is screenshot for you :) Regards Simon

3 4

Re: [Observium] RRD Perms Issue - Error Drawing Graph
by Adam Armstrong 15 Dec '15

15 Dec '15

It seems that someone has modified your cron jobs to no longer be run as root, since your rrds were created by root and svn has no ability to change them. You need to work out where the poller is run from. It should be /etc/cron.d/observium Adam. Sent with AquaMail for Android http://www.aqua-mail.com On 15 December 2015 18:08:08 Robbie Wright <robbie(a)siuslawbroadband.com> wrote: > Not sure who the poller is running as. What's the easy way to check that? > > Yes, svn update has always been run as su. > > /opt/observium/rrd is owned by www-data, not root unlike the other folders > in the main directory. However, digging into the directory, all of the > folders inside for each host are all owned by root. > > > Robbie Wright > Siuslaw Broadband <https://siuslawbroadband.com> > 541-902-5101 > > On Tue, Dec 15, 2015 at 9:24 AM, Adam Armstrong <adama(a)memetic.org> wrote: > >> Are you running your poller observium poller as a non-root user? >> >> Did you svn up as root? >> >> The contents of the rrd directory, and anything else written to by the >> poller, should be owned by the user who runs the poller. >> >> Adam. >> >> Sent with AquaMail for Android >> http://www.aqua-mail.com >> >> On 15 December 2015 17:06:24 Robbie Wright <robbie(a)siuslawbroadband.com> >> wrote: >> >>> Recently upgraded from 69xx to 72xx after we renewed our license and it >>> broke all of our RRD's, resulting in the "Error Drawing Graph" issue. >>> >>> Running this "./poller.php -h <hostname> -m ports -d" gives me two >>> noticeable, but unobjectionable to me things: >>> >>> SNMP_STATUS[TRUE] >>> o Device status Device is reachable by PING (8.28ms) and SNMP >>> (81.63ms) >>> >>> RRD CMD[update /opt/observium/rrd/hostname/status.rrd N:1] >>> RRD RUNTIME[0.0012s] >>> RRD STDOUT[ERROR: opening '/opt/observium/rrd/hostname/status.rrd': >>> Permission denied] >>> RRD_STATUS[FALSE] >>> >>> and this at the end of the results: >>> >>> >>> Log file '/opt/observium/logs/observium.log' is not writable, check file >>> permissions. >>> >>> >>> So clearly some type of permission issue but not sure what happened >>> during the upgrade that would have caused this. Any thoughts on what >>> chmod's need to be set on the directories or what else could have went >>> haywire? >>> >>> >>> >>> Robbie Wright >>> Siuslaw Broadband <https://siuslawbroadband.com> >>> 541-902-5101 >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> <http://postman.memetic.org/cgi-bin/mailman/listinfo/observium> >>> >>> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> > > > > ---------- > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >

3 10

RRD Perms Issue - Error Drawing Graph
by Robbie Wright 15 Dec '15

15 Dec '15

Recently upgraded from 69xx to 72xx after we renewed our license and it broke all of our RRD's, resulting in the "Error Drawing Graph" issue. Running this "./poller.php -h <hostname> -m ports -d" gives me two noticeable, but unobjectionable to me things: SNMP_STATUS[TRUE] o Device status Device is reachable by PING (8.28ms) and SNMP (81.63ms) RRD CMD[update /opt/observium/rrd/hostname/status.rrd N:1] RRD RUNTIME[0.0012s] RRD STDOUT[ERROR: opening '/opt/observium/rrd/hostname/status.rrd': Permission denied] RRD_STATUS[FALSE] and this at the end of the results: Log file '/opt/observium/logs/observium.log' is not writable, check file permissions. So clearly some type of permission issue but not sure what happened during the upgrade that would have caused this. Any thoughts on what chmod's need to be set on the directories or what else could have went haywire? Robbie Wright Siuslaw Broadband <https://siuslawbroadband.com> 541-902-5101

2 2

CBQoS graphs on MetroEthernet switches
by lom＠digitelitalia.com 15 Dec '15

15 Dec '15

Hello to everyone, we are experiencing a problem with CBQoS graphs on Cisco Me3600 devices. We have many service instance in the same bridge-domain on the same port. The CBQoS graphs works only on the first one, it's NaN for the others. Could you help me? Regards. digitel Ing. Lorenzo Mainardi Via della Fortezza 6 - 50129 Firenze <http://www.digitelitalia.com/> www.digitelitalia.com - 800 901 669 Tel +39 055 4624933 Fax +39 055 4624 947 lom(a)digitelitalia.com <mailto:lom@digitelitalia.com>

2 1

Address for billing
by Robbie Wright 15 Dec '15

15 Dec '15

Sorry for the mass email here, but trying to renew our sub to Observium and our CC is getting declined, with the banking tell us the billing address doesn't match what Observium's credit card processor has on file. I don't see a way to update our address in our account on Observium's system or with Paddle or whoever. Thoughts? Aside from using PayPal? Robbie Wright Siuslaw Broadband <https://siuslawbroadband.com> 541-902-5101

2 1

SVN password not working
by Anthony Polselli 14 Dec '15

14 Dec '15

Hi all, Went to update Observium and it's not taking my username & password. Been a while so I might be using the wrong password. Any way to reset the password? Thanks! [cid:image001.jpg@01D135E7.5F2E6A90] __________________________________________ Anthony Polselli, Chief Technology Officer Natural Networks, Inc. 10225 Barnes Canyon Rd. Suite A105 San Diego, CA 92121 anthony(a)naturalnetworks.com<mailto:anthony@naturalnetworks.com> http://www.naturalnetworks.com<http://www.naturalnetworks.com/> (619) 222-3232 office (858) 202-0301 fax

3 3

Arista Light levels reading
by Tomas Morales 14 Dec '15

14 Dec '15

Hi We are trying to monitor the light levels in fibre ports in our Arista switches but looks like it is no managed properly if we compare with a Brocade router. See attached the screenshoots for each device. For Arista, we see the "DOM TX" and "DOM RX" entries taken as "Power" but in Brocade they are taken as "dBm". I can provide the database output if required. I can see differences in the sensor table for sensors from Arista and Brocade devices. Any advice regarding how to fix this? I Regards tomas --- LMAX Exchange, Yellow Building, 1A Nicholas Road, London W11 4AN http://www.LMAX.com/ #1 Fastest Growing Tech Company in the UK - Sunday Times Tech Track 100 (2014) 2015 Best Margin Sector Platform - Profit & Loss Readers' Choice Awards 2015 Best FX Trading Venue - ECN/MTF - WSL Institutional Trading Awards 2014 Best Margin Sector Platform - Profit & Loss Readers' Choice Awards 2014 Best FX Trading Venue - ECN/MTF - WSL Institutional Trading Awards 2014 Best Infrastructure/Technology Initiative - WSL Institutional Trading Awards 2013 #15 Fastest Growing Tech Company in the UK - Sunday Times Tech Track 100 2013 Best Overall Testing Project - The European Software Testing Awards 2013 Best Margin Sector Platform - Profit & Loss Readers' Choice Awards 2013 Best FX Trading Platform - ECN/MTF - WSL Institutional Trading Awards 2013 Best Executing Venue - Forex Magnates Awards --- FX and CFDs are leveraged products that can result in losses exceeding your deposit. They are not suitable for everyone so please ensure you fully understand the risks involved. This message and its attachments are confidential, may not be disclosed or used by any person other than the addressee and are intended only for the named recipient(s). This message is not intended for any recipient(s) who based on their nationality, place of business, domicile or for any other reason, is/are subject to local laws or regulations which prohibit the provision of such products and services. This message is subject to the following terms (http://lmax.com/pdf/general-disclaimers.pdf), if you cannot access these, please notify us by replying to this email and we will send you the terms. If you are not the intended recipient, please notify the sender immediately and delete any copies of this message. LMAX Exchange is the trading name of LMAX Limited. LMAX Limited operates a multilateral trading facility. LMAX Limited is authorised and regulated by the Financial Conduct Authority (firm registration number 509778) and is a company registered in England and Wales (number 6505809). LMAX Hong Kong Limited is a wholly-owned subsidiary of LMAX Limited. LMAX Hong Kong is licensed by the Securities and Futures Commission in Hong Kong to conduct Type 3 (leveraged foreign exchange trading) regulated activity with CE Number BDV088.

3 2

Re: [Observium] SNMP and Large FileSystems (100TB+)
by Ric Davis 14 Dec '15

14 Dec '15

With RH 6.6 and 6.7 (I've not tried earlier) I've found that putting realStorageUnits 0 in snmpd.conf (and obviously restarting the daemon) appears to provide a fix. It's noted in bug BZ#654384 <https://bugzilla.redhat.com/show_bug.cgi?id=654384> here: https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/5/ht… It may be worth amending the FAQ ? -- Ric

1 0

Where to add license information
by Ken Robin Sivertsvik 14 Dec '15

14 Dec '15

Where and how do i add license information to my observium instalation? -- Ken Robin Sivertsvik Rissa Kraftlag SA | Markedskonsulent Fiber/ISP/IKT Tlf: 45255653 | krs(a)rissakraft.no | @ksivertsvik

2 1

Re: [Observium] observium Digest, Vol 65, Issue 49
by Dudu Handelman 13 Dec '15

13 Dec '15

Hi Rhian. Just use the latest netsnmp and it should be ok. I have 200Tb xfs and all ok. After upgrade. David Sent from my Samsung device -------- Original message -------- From: observium-request(a)observium.org Date: 13/12/2015 15:18 (GMT+01:00) To: observium(a)observium.org Subject: observium Digest, Vol 65, Issue 49 Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. SNMP and Large FileSystems (100TB+) (Rhian Resnick) 2. Re: SNMP and Large FileSystems (100TB+) (Tom Laermans) 3. Re: SNMP and Large FileSystems (100TB+) (Rhian Resnick) ---------------------------------------------------------------------- Message: 1 Date: Sun, 13 Dec 2015 13:41:39 +0000 From: Rhian Resnick <rresnick(a)fau.edu> To: Observium Network Observation System <observium(a)observium.org> Subject: [Observium] SNMP and Large FileSystems (100TB+) Message-ID: <BL2PR04MB020A904E5733C4744FA572BCBEC0(a)BL2PR04MB020.namprd04.prod.outlook.com> Content-Type: text/plain; charset="iso-8859-1" Good morning, We recently noticed that SNMP is having difficulty handling large file sysystem. We have a 120TB XFS system that is reporting on 4.4TB and alerting because SNMP is reporting the wrong values. snmpwalk -mALL -v2c -{COM} {HOST} hrStorageTable | grep 40 HOST-RESOURCES-MIB::hrStorageIndex.40 = INTEGER: 40 HOST-RESOURCES-MIB::hrStorageType.40 = OID: HOST-RESOURCES-TYPES::hrStorageFixedDisk HOST-RESOURCES-MIB::hrStorageDescr.40 = STRING: /home HOST-RESOURCES-MIB::hrStorageAllocationUnits.40 = INTEGER: 4096 Bytes HOST-RESOURCES-MIB::hrStorageSize.40 = INTEGER: 1186465536 HOST-RESOURCES-MIB::hrStorageUsed.40 = INTEGER: 1036605829 HOST-RESOURCES-MIB::hrStorageUsed.44 = INTEGER: 666446640 Some forums have indicated this can be resolved by upgrading to 64 bit integers but I am not an SNMP expert. Has anyone seen this behavior and if so how do we work around it? In the HPC world this is a small name space so I worry about monitoring storage on our Lustre FS. Thanks Rhian Resnick Assistant Director Middleware and HPC Office of Information Technology Florida Atlantic University 777 Glades Road, CM22, Rm 218 Boca Raton, FL 33431 Phone 561.297.2647 Fax 561.297.0222 [image] <https://hpc.fau.edu/wp-content/uploads/2015/01/image.jpg>

1 0

mod_auth_kerb
by Ciro Iriarte 13 Dec '15

13 Dec '15

Hi!, is anyone using external authentication with kerberos?, I have an old version (4586) running without issues with sles11+apache+kerberos but trying to run a current release (7203) on the same host, it's like apache doesn't accept the user/password pair (keeps asking for them). It might be a misconfiguration, but I would like to know if anyone else is using a similar configuration nowadays or has comments about it. Regards, -- Ciro Iriarte http://iriarte.it --

3 15

Alerting - match multiple ASNs ?
by Robert Williams 10 Dec '15

10 Dec '15

Hi, What’s the correct syntax for an entity match which will match a selection of ASNs? I need an alert checker which will look for a specific set of ASNs and alert for any BGP session being not-up. Currently for our iBGP we use: [Conditions] bgpPeerState ne established bgpPeerAdminStatus notequals stop [Device] * [Entity Match] bgpPeerRemoteAs match <ourASN> This works perfectly. Now – what I’m after is that I need a new checker which will match eBGP ASNs like 174,3356,2914,5580 etc. all in one rule (the ‘important’ ASNs, for want of a better term). I have tried a selection of things but I’m obviously missing what the logical ‘or’ element should be in this case, as all my attempts at using multiple ASNs within a match just result in zero matches. Can someone point me in the right direction please? Cheers! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

3 4

Clavister device as new OS
by Gregory Storme 10 Dec '15

10 Dec '15

Hi, I'm trying to add Clavister cOS as a supported OS, but without success.What I've done: - Edit includes/definitions/os.inc.php:$os = "clavister";$config['os'][$os]['vendor'] = "Clavister";$config['os'][$os]['text'] = "Clavister cOS";$config['os'][$os]['type'] = "network";$config['os'][$os]['icon'] = "clavister";$config['os'][$os]['graphs'][] = "device_bits";$config['os'][$os]['graphs'][] = "device_processor";$config['os'][$os]['graphs'][] = "device_mempool";$config['os'][$os]['sysObjectID'][] = ".1.3.6.1.4.1.5089.1";$config['os'][$os]['sysDescr'][] = "/^Clavister/";$config['os'][$os]['mibs'][] = "CLAVISTER-MIB";$config['os'][$os]['mibs'][] = "CLAVISTER-SMI-MIB"; - create includes/discovery/os/clavister.inc.php:<?php if (strstr($sysObjectId, ".1.3.6.1.4.1.5089.1")) { $os = "clavister"; } else if (preg_match("/^Clavister/", $sysDescr)) { $os = "clavister"; } - created the CLAVISTER-MIB & CLAVISTER-SMI-MIB (downloaded from the vendor website) under the mibs folder When I add such a device and run the discovery & poller, it seems as the Clavister MIBs are not used.The OS type is detected though? ##### devicename [338] ##### o OS clavister o Last poll duration 0.42 seconds o Last Polled 2015-12-10 01:28:30 o SNMP Version v2c o Device status Device is reachable by PING (0.36ms) and SNMP (7.20ms) o Modules Excluded ipmi, junose-atm-vp, cisco-ipsec-flow-monitor, cisco-remote-access-monitor, cisco-cef, arista-software-ip-forwarding,cipsec-tunnels, cisco-cbqos, cisco-eigrp, netscaler-vsvr, aruba-controller o Disabled Globally unix-agent, cisco-vpdn, wmi o Modules Enabled system, os, sensors, status, processors, mempools, storage, netstats, hr-mib, ucd-mib, ipSystemStats, ports, bgp-peers, toner,ucd-diskio, wifi, p2p-radios, ospf, sla, mac-accounting, loadbalancer, entity-physical, applications, fdb-table, graphs,oids ##### Module Start: system ##### o Uptime 8 days, 1h 57m 55s o sysObjectID .1.3.6.1.4.1.5089.1 o snmpEngineID o sysDescr Clavister cOS Core 10.21.02.01-25325 o sysName n/a o Location N/A o Module time 0.0578s ##### Module Start: os ##### o OS Poller Generic... What am I doing wrong?

3 3

Error after update to revision 7236
by Alex Winder ＠ M5i 09 Dec '15

09 Dec '15

Hi everyone, We've just updated to revision 7236 and got the following error. -- Updating database/file schema 251 -> 252 ... (db) done (1 errors). In /opt/observium/logs/update-errors.log we see the following error [2015/12/09 19:35:36 +0000] discovery.php(19989): Query: ALTER TABLE `authlog` CHANGE `user_agent` `user_agent` TEXT CHARACTER SET utf8 COLLATE utf8_general_ci NULL; [2015/12/09 19:35:36 +0000] discovery.php(19989): Error: (1054) Unknown column 'user_agent' in 'authlog' Should we do anything for this? Regards, Alex.

3 3

Cisco ASA - inaccurate traffic for one specific interface
by Ben Maschke 09 Dec '15

09 Dec '15

Hi guys, I've added a new ASA to Observium. The issue is that for one interface no packets have been collected so far: [image: Inline images 1] But in the details you can see that traffic has been collected: [image: Inline images 2] The result is that the overall traffic graph is inaccurate (traffic should be ~600Mbit/s): [image: Inline images 3] Cheers

3 3

Quagga with SNMP support.
by Gabriel Zamorski 08 Dec '15

08 Dec '15

Hello, Does anyone have a experience with snmp support in Quagga on Debian 7/8? I installed Quagga with SNMP support (smux or agentx) and configured Quagga to use snmp, but Observium doesn't see anything except an AS number. In Properties > MIBs section there are a couple of errors like: - bgpLocalAs.0 1m 28s ago SNMP error - .1.3.6.1.2.1.25.3.3.1.2.196608 (608 to 619) SNMP error On the other hand, in a similar configuration in VyOS everything works fine. I'm not sure if it depends on patched quagga on VyOS or a misconfiguration in my environment. Regards! Gabriel

4 5

Re: [Observium] Everything is DOWN after svn UP :-)
by Richard Müller 08 Dec '15

08 Dec '15

Hy *, I also experienced this issue some minutes ago. My reason was that "someone" (svn?) created a .index file in the MIB Directory, which caused snmpwalk to die: root@horstname:/opt/observium# /usr/bin/snmpget -v2c -c '***' -Pu -OQUst -m SNMPv2-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'horstname2':'161' sysObjectID.0 sysUpTime.0 add_mibdir: strings scanned in from /opt/observium/mibs/rfc/.index are too large. count = 136 MIB search path: /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp Cannot find module (SNMPv2-MIB): At line 0 in (none) sysObjectID.0: Unknown Object Identifier (Sub-id not found: (top) -> sysObjectID) sysUpTime.0: Unknown Object Identifier (Sub-id not found: (top) -> sysUpTime) removing the /opt/observium/mibs/rfc/.index file fixed the glitch - does anybody know whats the purpose of these files and where do they come from? Thanks Richard Message: 2 Date: Fri, 4 Dec 2015 12:05:24 +0100 From: Gabriel Zamorski <gabriel.zamorski(a)domeny.pl> To: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] Everything is DOWN after svn UP :-) Message-ID: <5CBBE15E-ED0C-4B8C-B606-E5C5B73DE9DF(a)domeny.pl> Content-Type: text/plain; charset="utf-8" Debian 7.9, libsnmp-base 5.4.3~dfsg-2.8+deb7u1, libsnmp15 5.4.3~dfsg-2.8+deb7u1, php5-snmp 5.4.45-0+deb7u2, snmp 5.4.3~dfsg-2.8+deb7u1. It was updated from 7224 to 7226, then I did rollback. It is strange, today I updated to the latest version 7227 with no problem (without alerts). G. > Wiadomo?? napisana przez Adam Armstrong <adama(a)memetic.org> w dniu 04.12.2015, o godz. 08:54: > > Given that it's virtually impossible for this to be an actual bug in the SVN (hundreds of users would be complaining), it might help to have some additional information about your installation. > > Do you know what version you updated from? What are you running it on? What version of net-snmp? > > adam. >> On 04/12/2015 07:53:05, Gabriel Zamorski <gabriel.zamorski(a)domeny.pl> wrote: >> >> Hello, >> >> Yesterday after upgrading observium (like everyday morning) we got hundreds of alerts. It seems that observium could not connect to any machine using SNMP - I checked this from console via ./poller.php and every server was unreachable, so I had to rollback to the earlier revision. Do you know anything about this? >> >> Regards, >> G. >> >> >> -- Richard Müller | Geschäftsführer teamix GmbH Südwestpark 43 90449 Nürnberg Tel.: +49 911 30999 0 | Fax: +49 911 30999 99 mail: rm(a)teamix.de | web: http://www.teamix.de | blog: http://blog.teamix.de Amtsgericht Nürnberg, HRB 18320 | Geschäftsführer: Oliver Kügow, Richard Müller *** Bitte liken Sie uns auf Facebook: facebook.com/teamix *** _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://postman.memetic.org/pipermail/observium/attachments/20151204/cc4b310…> -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/pkcs7-signature Size: 3587 bytes Desc: not available URL: <http://postman.memetic.org/pipermail/observium/attachments/20151204/cc4b310…> ------------------------------ Message: 3 Date: Fri, 04 Dec 2015 11:58:55 +0000 From: Adam Armstrong <adama(a)observium.org> To: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] Everything is DOWN after svn UP :-) Message-ID: <1516cdbfc18.2779.11b54b3dd25b712395dab9818c67596f(a)observium.org> Content-Type: text/plain; charset="utf-8"; Format="flowed" I think this is perhaps, again, the pesky svn broken file issue. This problem seems to have gotten significantly worse since the svn database version changes. Adam. Sent with AquaMail for Android http://www.aqua-mail.com On 4 December 2015 11:05:41 am Gabriel Zamorski <gabriel.zamorski(a)domeny.pl> wrote: > Debian 7.9, libsnmp-base 5.4.3~dfsg-2.8+deb7u1, libsnmp15 > 5.4.3~dfsg-2.8+deb7u1, php5-snmp 5.4.45-0+deb7u2, snmp > 5.4.3~dfsg-2.8+deb7u1. It was updated from 7224 to 7226, then I did > rollback. It is strange, today I updated to the latest version 7227 > with no problem (without alerts). > > G. > > > > >> Wiadomo?? napisana przez Adam Armstrong <adama(a)memetic.org> w dniu >> 04.12.2015, o godz. 08:54: >> >> Given that it's virtually impossible for this to be an actual bug in >> the SVN (hundreds of users would be complaining), it might help to >> have some additional information about your installation. >> >> Do you know what version you updated from? What are you running it >> on? What version of net-snmp? >> >> adam. >>> On 04/12/2015 07:53:05, Gabriel Zamorski <gabriel.zamorski(a)domeny.pl> wrote: >>> >>> Hello, >>> >>> Yesterday after upgrading observium (like everyday morning) we got >>> hundreds of alerts. It seems that observium could not connect to any >>> machine using SNMP - I checked this from console via ./poller.php >>> and every server was unreachable, so I had to rollback to the >>> earlier revision. Do you know anything about this? >>> >>> Regards, >>> G. >>> >>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > > > ---------- > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://postman.memetic.org/pipermail/observium/attachments/20151204/661784e…>

3 2

Minor documentation typo
by Roland Hill 08 Dec '15

08 Dec '15

Hi team, There is a minor typo on this page: http://www.observium.org/docs/unix_agent/ Specifically this, scp /opt/observium/scripts/observium_agent_xinetd user@your_server:/etc/xinet.d/observium_agent_xinetd Note that /etc/xinet.d should be /etc/xinetd.d Very minor, but thought I'd let you know about it. -- Regards, Roland PGP Key 0xDA39319B = BCF0 1214 BAE9 5A3D 46FC 21A6 360D 9398 DA39 319B

2 1

Regex in an entity match not working right
by Spencer Ryan 07 Dec '15

07 Dec '15

Hi All, I'm trying to match ports with the name port-channel1 through 19, and the "match" keyword isn't doing what I want. What I think is correct is "ifName match port-channel([1-9]|1[0-9])" However that gives me 0 matches. If I change it to something like ifName match port-channel*" I get all the port channels, so it's matching the device properly, but for this alert checker I just need port channels 1-19. Any ideas? I've tried a bunch of combinations and nothing seems to work right. Even "port-channel." doesn't match the additional character. *Spencer Ryan* | Senior Systems Administrator | sryan(a)arbor.net *Arbor Networks* +1.734.794.5033 (d) | +1.734.846.2053 (m) www.arbornetworks.com

3 5

Arista switches environment sensors have stopped working
by Ben Maschke 07 Dec '15

07 Dec '15

Hi guys, after updating to the latest subscriber version all of our checks for environment sensors (Arista switches) have stopped working: [image: Inline images 1] It seems that it has stopped receiving proper sensor data: [image: Inline images 2] Thx -- *Ben Maschke* Senior System Engineer *Tel:* +44 (0) 20 8742 6820 *Shazam* 26-28 Hammersmith Grove, London, W6 7HA Please consider the environment before printing this document Shazam Entertainment Limited is incorporated in England and Wales under company number 3998831 and its registered office is at 26-28 Hammersmith Grove, London W6 7HA.

4 8

toggles and pop ups have stopped working
by observium＠istar.net.nz 06 Dec '15

06 Dec '15

Hello We've recently updated Observium (now 0.15.12.7230) and enabled SSH and the on/off switches are not being shown and the date popups don't work. If I browse to it on http it seems to be fine. I've checked the apache config and it looks identical, any thoughts? Thanks SHANE lE <mailto:shanson@istar.net.nz> shanson(a)istar.net.nz lW <https://istar.net.nz/> istar.net.nz lA PO Box 911507, Victoria St West, Auckland lM +64 21 623 903

2 2

UNIX Agent
by Alex Winder ＠ M5i 05 Dec '15

05 Dec '15

Hi all, I'm currently trying to get the UNIX agent for Observium working with some of our hosts so that we can obtain more data for applications, primarily NGINX. We are now seeing data on the agent execution time graph. We are getting responses from the Observium host to the NGINX host via Telnet, and receiving information about NGINX. We are getting the NGINX status information through Lynx on the localhost. We are using the following configs. /etc/xinetd.d/observium_agent_xinetd service observium_agent { type = UNLISTED port = 36602 socket_type = stream protocol = tcp wait = no user = root server = /usr/bin/observium_agent # configure the IPv[4|6] address(es) of your Observium server here: only_from = [IPs removed] 127.0.0.1 ::1 # Don't be too verbose. Don't log every check. This might be # commented out for debugging. If this option is commented out # the default options will be used for this service. log_on_success = disable = no } /usr/lib/observium_agent/local/nginx !/usr/bin/env python import urllib2 import re data = urllib2.urlopen('http://localhost/nginx-status').read() params = {} for line in data.split("\n"): smallstat = re.match(r"\s?Reading:\s(.*)\sWriting:\s(.*)\sWaiting:\s(.*)$", line) req = re.match(r"\s+(\d+)\s+(\d+)\s+(\d+)", line) if smallstat: params["Reading"] = smallstat.group(1) params["Writing"] = smallstat.group(2) params["Waiting"] = smallstat.group(3) elif req: params["Requests"] = req.group(3) else: pass dataorder = [ "Active", "Reading", "Writing", "Waiting", "Requests" ] print "<<<nginx>>>\n"; for param in dataorder: if param == "Active": Active = int(params["Reading"]) + int(params["Writing"]) + int(params["Waiting"]) print Active else: print params[param] /etc/nginx/sites-automatic/localhost.conf server { listen 80; listen [::]:80; server_name localhost; server_name_in_redirect off; charset utf-8; log_not_found on; access_log /var/log/nginx/localhost_combined-access.log combined buffer=128k flush=5m; error_log /var/log/nginx/localhost_error.log; location / { root /local-storage/localhost/nginx-hosted/public_html; } location /nginx-status { stub_status on; access_log off; allow 127.0.0.1; allow ::1; deny all; } } Any help with this would be much appreciated. Where can we expect to see logs? Any tips on how we can resolve this? Regards, Alex.

3 4

Problems with fresh installation - svn revision 7229 (and stable too)
by Eduardo Schoedler 05 Dec '15

05 Dec '15

# php includes/update/update.php -- Updating database/file schema 000 -> 001 ... (db) done. 001 -> 002 ... (db) done. 002 -> 003 ... (db) done. 003 -> 004 ... (db) done. 004 -> 005 ... (db) done. 005 -> 006 ... (db) done. 006 -> 007 ... (db) done. 007 -> 008 ... (db) done. 008 -> 009 ... (db) done. 009 -> 010 ... (db) done. 010 -> 011 ... (db) done. 011 -> 012 ... (db) done. 012 -> 013 ... (db) done. 013 -> 014 ... (db) done. 014 -> 015 ... (db) done. 015 -> 016 ... (db) done. 016 -> 017 ... (db) done. 017 -> 018 ... (db) done. 018 -> 019 ... (db) done. 019 -> 020 ... (db) done. 020 -> 021 ... (db) done. 021 -> 022 ... (db) done. 022 -> 023 ... (db) done. 023 -> 024 ... (db) done. 024 -> 025 ... (db) done. 025 -> 026 ... (db) done. 026 -> 027 ... (db) done. 027 -> 028 ... (db) done. 028 -> 029 ... (db) done. 029 -> 030 ... (db) done. 030 -> 031 ... (db) done. 031 -> 032 ... (db) done. 032 -> 033 ... (db) done. 033 -> 034 ... (db) done. 034 -> 035 ... (db) done. 035 -> 036 ... (db) done. 036 -> 037 ... (db) done. 037 -> 038 ... (db) done. 038 -> 039 ... (db) done. 039 -> 040 ... (db) done. 040 -> 041 ... (db) done. 041 -> 042 ... (db) done. 042 -> 043 ... (db) done. 043 -> 044 ... (db) done. 044 -> 045 ... (db) done. 045 -> 046 ... (db) done. 046 -> 047 ... (db) done. 047 -> 048 ... (db) done. 048 -> 049 ... (db) done. 049 -> 050 ... (db) done. 050 -> 051 ... (db) done. 051 -> 052 ... (db) done. 052 -> 053 ... (db) done. 053 -> 054 ... (db) done. 054 -> 055 ... (db) done. 055 -> 056 ... (db) done. 056 -> 057 ... (db) done. 057 -> 058 ... (db) done. 058 -> 059 ... (db) done. 059 -> 060 ... (db) done. 060 -> 061 ... (db) done. 061 -> 062 ... (db) done. 062 -> 063 ... (db) done. 063 -> 064 ... (db) done. 064 -> 065 ... (db) done. 065 -> 066 ... (db) done. 066 -> 067 ... (db) done. 067 -> 068 ... (db) done. 068 -> 069 ... (db) done. 069 -> 070 ... (db) done. 070 -> 071 ... (db) done. 071 -> 072 ... (db) done. 072 -> 073 ... (db) done. 073 -> 074 ... (php) Updating netscaler service RRDs 074 -> 075 ... (db) done. 075 -> 076 ... (db) done. 076 -> 077 ... (db) done. 077 -> 078 ... (db) done. 078 -> 079 ... (db) done. 079 -> 080 ... (db) done. 080 -> 081 ... (db) done. 081 -> 082 ... (db) done. 082 -> 083 ... (db) done. 083 -> 084 ... (db) done. 084 -> 085 ... (db) done. 085 -> 086 ... (db) done. 086 -> 087 ... (db) done. 087 -> 088 ... (db) done. 088 -> 089 ... (db) done. 089 -> 090 ... (db) done. 090 -> 091 ... (db) done. 091 -> 092 ... (db) done. 092 -> 093 ... (db) done. 093 -> 094 ... (db) done. 094 -> 095 ... (php) Converting alert serialize() arrays to JSON: 095 -> 096 ... (db) done. 096 -> 097 ... (db) done. 097 -> 098 ... (db) done. 098 -> 099 ... (db) done. 099 -> 100 ... (db) done. 100 -> 101 ... (db) done. 101 -> 102 ... (db) done. 102 -> 103 ... (db) done. 103 -> 104 ... (db) done. 104 -> 105 ... (db) done. 105 -> 106 ... (db) done. 106 -> 107 ... (db) done. 107 -> 108 ... (db) done. 108 -> 109 ... (db) done. 109 -> 110 ... (db) done. 110 -> 111 ... (db) done. 111 -> 112 ... (db) done. 112 -> 113 ... (db) done. 113 -> 114 ... (db) done. 114 -> 115 ... (db) done. 115 -> 116 ... (db) done. 116 -> 117 ... (db) done. 117 -> 118 ... (db) done. 118 -> 119 ... (db) done. 119 -> 120 ... (db) done. 120 -> 121 ... (db) done. 121 -> 122 ... (db) done. 122 -> 123 ... (db) done. 123 -> 124 ... (db) done. 124 -> 125 ... (db) done. 125 -> 126 ... (db) done. 126 -> 127 ... (php) Converting FDB count RRD ds fdb->value: 127 -> 128 ... (php) Rename old storage RRDs and DB: 128 -> 129 ... (php) Rename old mempools RRDs and DB: 129 -> 130 ... (db) done. 130 -> 131 ... (db) done. 131 -> 132 ... (db) done. 132 -> 133 ... (db) done. 133 -> 134 ... (db) done. 134 -> 135 ... (db) done. 135 -> 136 ... (db) done. 136 -> 137 ... (db) done. 137 -> 138 ... (db) done. 138 -> 139 ... (db) done. 139 -> 140 ... (db) done. 140 -> 141 ... (db) done. 141 -> 142 ... (db) done. 142 -> 143 ... (db) done. 143 -> 144 ... (db) done. 144 -> 145 ... (db) done. 145 -> 146 ... (db) done. 146 -> 147 ... (db) done. 147 -> 148 ... (db) done. 148 -> 149 ... (db) done. 149 -> 150 ... (db) done (2 errors). # svn update && ./discovery.php -h none Updating '.': At revision 7229. ___ _ _ / _ \ | |__ ___ ___ _ __ __ __(_) _ _ _ __ ___ | | | || '_ \ / __| / _ \| '__|\ \ / /| || | | || '_ ` _ \ | |_| || |_) |\__ \| __/| | \ V / | || |_| || | | | | | \___/ |_.__/ |___/ \___||_| \_/ |_| \__,_||_| |_| |_| Observium Professional 0.15.12.7229 http://www.observium.org -- Updating database/file schema 149 -> 150 ... (db) done (10 errors). # cat update-errors.log [2015/12/04 23:06:38 +0000] discovery.php(68419): ====== Schema update 149 -> 150 ============== [2015/12/04 23:06:38 +0000] discovery.php(68419): Query: ALTER TABLE `alert_assoc` CHANGE `device_attributes` `device_attribs` TEXT CHARACTER SET utf8 COLLATE utf8_unicode_ci NULL DEFAULT NULL; [2015/12/04 23:06:38 +0000] discovery.php(68419): Error: (1054) Unknown column 'device_attributes' in 'alert_assoc' [2015/12/04 23:06:38 +0000] discovery.php(68419): Query: ALTER TABLE `alert_assoc` CHANGE `attributes` `entity_attribs` TEXT CHARACTER SET utf8 COLLATE utf8_general_ci NULL DEFAULT NULL ; [2015/12/04 23:06:38 +0000] discovery.php(68419): Error: (1054) Unknown column 'attributes' in 'alert_assoc' [2015/12/04 23:06:38 +0000] discovery.php(68419): Query: ALTER TABLE `ports_perms` ADD `entity_type` VARCHAR( 32 ) NOT NULL AFTER `user_id` ; [2015/12/04 23:06:38 +0000] discovery.php(68419): Error: (1146) Table 'observium.ports_perms' doesn't exist [2015/12/04 23:06:38 +0000] discovery.php(68419): Query: ALTER TABLE `ports_perms` CHANGE `port_id` `entity_id` INT( 11 ) NOT NULL ; [2015/12/04 23:06:38 +0000] discovery.php(68419): Error: (1146) Table 'observium.ports_perms' doesn't exist [2015/12/04 23:06:38 +0000] discovery.php(68419): Query: UPDATE `ports_perms` SET `entity_type` = 'port' WHERE 1; [2015/12/04 23:06:38 +0000] discovery.php(68419): Error: (1146) Table 'observium.ports_perms' doesn't exist [2015/12/04 23:06:38 +0000] discovery.php(68419): Query: RENAME TABLE `ports_perms` TO `entity_permissions` ; [2015/12/04 23:06:38 +0000] discovery.php(68419): Error: (1050) Table 'entity_permissions' already exists [2015/12/04 23:06:38 +0000] discovery.php(68419): Query: INSERT `entity_permissions` (user_id,entity_id,entity_type) SELECT `bill_perms`.`user_id`,`bill_perms`.`bill_id`,'bill' AS `entity_type` FROM `bill_perms`; [2015/12/04 23:06:38 +0000] discovery.php(68419): Error: (1146) Table 'observium.bill_perms' doesn't exist [2015/12/04 23:06:38 +0000] discovery.php(68419): Query: INSERT `entity_permissions` (user_id,entity_id,entity_type) SELECT `devices_perms`.`user_id`,`devices_perms`.`device_id`, 'device' AS `entity_type` FROM `devices_perms`; [2015/12/04 23:06:38 +0000] discovery.php(68419): Error: (1146) Table 'observium.devices_perms' doesn't exist [2015/12/04 23:06:38 +0000] discovery.php(68419): Query: DROP TABLE `bill_perms`; [2015/12/04 23:06:38 +0000] discovery.php(68419): Error: (1051) Unknown table 'observium.bill_perms' [2015/12/04 23:06:38 +0000] discovery.php(68419): Query: DROP TABLE `devices_perms`; [2015/12/04 23:06:38 +0000] discovery.php(68419): Error: (1051) Unknown table 'observium.devices_perms' # cat db.log [2015/12/04 23:06:38 +0000] discovery.php(68419): Failed dbQuery (#1146 - Table 'observium.observium_attribs' doesn't exist), Query: SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'dbSchema'; [2015/12/04 23:06:38 +0000] discovery.php(68419): Failed dbQuery (#1054 - Unknown column 'device_attributes' in 'alert_assoc'), Query: ALTER TABLE `alert_assoc` CHANGE `device_attributes` `device_attribs` TEXT CHARACTER SET utf8 COLLATE utf8_unicode_ci NULL DEFAULT NULL; [2015/12/04 23:06:38 +0000] discovery.php(68419): Failed dbQuery (#1054 - Unknown column 'attributes' in 'alert_assoc'), Query: ALTER TABLE `alert_assoc` CHANGE `attributes` `entity_attribs` TEXT CHARACTER SET utf8 COLLATE utf8_general_ci NULL DEFAULT NULL ; [2015/12/04 23:06:38 +0000] discovery.php(68419): Failed dbQuery (#1146 - Table 'observium.ports_perms' doesn't exist), Query: ALTER TABLE `ports_perms` ADD `entity_type` VARCHAR( 32 ) NOT NULL AFTER `user_id` ; [2015/12/04 23:06:38 +0000] discovery.php(68419): Failed dbQuery (#1146 - Table 'observium.ports_perms' doesn't exist), Query: ALTER TABLE `ports_perms` CHANGE `port_id` `entity_id` INT( 11 ) NOT NULL ; [2015/12/04 23:06:38 +0000] discovery.php(68419): Failed dbQuery (#1146 - Table 'observium.ports_perms' doesn't exist), Query: UPDATE `ports_perms` SET `entity_type` = 'port' WHERE 1; [2015/12/04 23:06:38 +0000] discovery.php(68419): Failed dbQuery (#1050 - Table 'entity_permissions' already exists), Query: RENAME TABLE `ports_perms` TO `entity_permissions` ; [2015/12/04 23:06:38 +0000] discovery.php(68419): Failed dbQuery (#1146 - Table 'observium.bill_perms' doesn't exist), Query: INSERT `entity_permissions` (user_id,entity_id,entity_type) SELECT `bill_perms`.`user_id`,`bill_perms`.`bill_id`,'bill' AS `entity_type` FROM `bill_perms`; [2015/12/04 23:06:38 +0000] discovery.php(68419): Failed dbQuery (#1146 - Table 'observium.devices_perms' doesn't exist), Query: INSERT `entity_permissions` (user_id,entity_id,entity_type) SELECT `devices_perms`.`user_id`,`devices_perms`.`device_id`, 'device' AS `entity_type` FROM `devices_perms`; [2015/12/04 23:06:38 +0000] discovery.php(68419): Failed dbQuery (#1051 - Unknown table 'observium.bill_perms'), Query: DROP TABLE `bill_perms`; [2015/12/04 23:06:38 +0000] discovery.php(68419): Failed dbQuery (#1051 - Unknown table 'observium.devices_perms'), Query: DROP TABLE `devices_perms`; -- Eduardo Schoedler

4 4

monitor tmpfs storage
by Simon Smith 04 Dec '15

04 Dec '15

Hi All, just moved our RRDs to tmpfs storage, and WOW I noticed a speed difference, not only in the graphs, but also in the IO load should of looked at http://observium.org/docs/persistent_ramdisk/ in the past DOH! however i’ve just noticed the observium isn’t showing it as a storage mount? can observium monitor actually monitor it at all ? also I’ve set my limit at 10GB as the server has 12GB of RAM, and the RRD folder is currently at 6.8GB bit of a stupid question but what happens if I’m close to the limit? as i knackered? more RAM server? regards Simon - Hestor Ltd

3 3

Update db schema error
by Tomasz Karczewski 04 Dec '15

04 Dec '15

I wanted to update db-schema but I got this error, [2015/12/04 13:14:32 +0100] discovery.php(2635): ====== Schema update 251 -> 252 ============== [2015/12/04 13:14:32 +0100] discovery.php(2635): Query: ALTER TABLE `eventlog` CHANGE `timestamp` `timestamp` TIMESTAMP NOT NULL DEFAULT CURRENT_TIMESTAMP; [2015/12/04 13:14:32 +0100] discovery.php(2635): Error: (1114) The table '#sql-ae4_bf3697' is full Tomasz Karczewski Administrator Sieci olman tkarczewski(a)man.olsztyn.pl http://www.man.olsztyn.pl http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie

3 2

Alert Threshold for CBQoS drops
by Robert Williams 04 Dec '15

04 Dec '15

Hi, Is it possible to have alert elements/metrics which use data collected from CBQoS, like drops for example? Reason for request - we would like to get alerting for certain types of port (CORE for example) where QoS is performing drops. Currently (in another system) we poll a global statistic which gives us the 'total' number of drops per chassis or LC, but this does nothing more than point towards a chassis or line-card. A human then have to pick their way through the CBQoS stats to try to see where it was (if it was big), which very time consumptive. The statistics and framework all appear to be in place within Observium, just need to know if there are some metric conditions which can use CBQoS as a trigger, like ifCBQoSDrops_rate > 10 for example? So, is this already possible? Or should I make a feature request? Cheers all! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

2 2

Everything is DOWN after svn UP :-)
by Gabriel Zamorski 04 Dec '15

04 Dec '15

Hello, Yesterday after upgrading observium (like everyday morning) we got hundreds of alerts. It seems that observium could not connect to any machine using SNMP - I checked this from console via ./poller.php and every server was unreachable, so I had to rollback to the earlier revision. Do you know anything about this? Regards, G.

4 4

CBQOS does not appear to work under NX-OS
by Stephen Fulton 04 Dec '15

04 Dec '15

Hi there, I have a Cisco Nexus 7k running the NX-OS 6.2 train, and I've noticed that while Observium picks up on CBQOS for interfaces, there is no data being graphed. Observium does detect the class-maps/policy-maps, but no results in the graphs. There are errors on one port that should be picked up, but I'm not seeing it reflected. What can be done? BTW, I'm using the subscription version, latest stable (0.15.11.7203). -- Stephen

3 3

Zenoss Integration Sync
by Rudy Pancaro 04 Dec '15

04 Dec '15

Has anyone every integrated Observium and Zenoss together. Zenoss is another networking monitoring platform, but the platform could use a more friendly GUI. The Observium GUI is very nice. Please let me know if this is possible. I believe that Observium and Nagios integrates with one another, but our organization uses Zenoss. Thank you.

4 8

Device check and down alert question
by Ron Culler 03 Dec '15

03 Dec '15

I have noticed that I see down notices in Observium often when the snmp check fails (I have only seen this when checking servers (Windows/Linux). The device is up and a ping/icmp check would see this but because the snmp check had a problem I get a down indication. Sometimes it has to deal with the snmp service on the host being checked hanging or crashing, other times I have seen load or congestion cause it. Is there an option or would it make sense to add a feature that would check snmp first and in the event of an error fall back and do a ping/icmp check to see if the device is up or not? It would be beneficial to see if the server is up and get a notice about a snmp check failure. I could also see a check flow that would check snmp first, if it errored it would check with a ping, if the ping returns wait for the next snmp check before sending the notice or marking the device down. Ron Culler

2 1