- observium - lists.observium.org

Re: [Observium] Moving Observium
by Cody Cook 22 Dec '16

22 Dec '16

https://www.digitalocean.com/community/tutorials/how-to- migrate-a-mysql-database-between-two-servers That creates and migrates a database. You will also need to add and give permissions for a user on your new MySQL server. The installation instructions should explain how that's done since it is the same commands. Then update the config file for Observium to match your new setup. This is probably a basic skill you should know outside of using Observium. On Dec 22, 2016 1:15 PM, "William Bauer" <bbauer(a)scripps.edu> wrote: > Are there instructions somewhere for moving Observium? I don't know how > to migrate mysql. I was hoping there are concise Observium instructions, > much like the excellent install page. > ------------------------------ > *From:* Cody Cook > *Sent:* Thu Dec 22 13:07:30 PST 2016 > *To:* Observium Network Observation System > *Subject:* Re: [Observium] Moving Observium > > You'll need to also migrate and redirect your MySQL database too. > > On Dec 22, 2016 12:45 PM, "William Bauer" <bbauer(a)scripps.edu> wrote: > >> So I have my new CentOS7 system ready to go, moving from a CentOS6 VM. I >> thought I'd found it before, but I can't find instructions for moving >> observium to a different system (same x86_64 architecture). I can move the >> RRDs, but isn't there more to it, like migrating mysql data? >> >> I've looked through the documentation. Perhaps I'm just looking for the >> wrong text. Any links someone can point to, or instructions for moving >> from one host to another? >> >> Thanks. >> >> Bill >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> > ------------------------------ > NOTE: This message was trained as non-spam. If this is wrong, please > correct the training as soon as possible. > > > > ------------------------------ > > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >

1 0

Updates to CentOS7 instructions?
by William Bauer 22 Dec '16

22 Dec '16

I'm replacing a poorly performing VM running CentOS6 with a real computer running CentOS7. The two commands (listed below) early on in the CentOS7 instructions appear to be invalid. I'm not super Linux literate as I know more of the BSD and Solaris worlds. Are there replacement sources for these? Here are the ones currently failing (I've tried no more of the instructions). I suppose these could be only temporary failures: rpm --import http://apt.sw.be/RPM-GPG-KEY.dag.txt rpm -Uvh http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.3-1.el7.rf.… Any help is appreciated. Bill

1 0

Wireless Networks
by Stef Renders 20 Dec '16

20 Dec '16

Hi All, We recently started adding customer's wireless environments in our Observium installation. I'm not sure whether this was ever available, but I can tell that observium is discovering my SSID's since I can see them in the database, however, I don't seem to find any reference to them in the interface. Anyone has an idea how far this was ever implemented ? Our customer is using Ruckus. And it seems only the wifi_wlans table is being populated: Kind regards

2 1

suppress tiles on front page
by Vater, Wolfgang 20 Dec '16

20 Dec '16

Hi there, I created alerts for port errors and discards to be notified if there are more than 25. But on my front page I get a tile for each port with port errors, even if it is only 1 error. Is this customizable? I would like to be able to suppress this for ports where I know this happens but can't do anything about it (because someone else doesn't want to fix their device), or raise the threshold so something higher than 1? Wolfgang Wolfgang Vater | Lead Client Architect | Enterprise Services Unisys Deutschland GmbH | +49 162 255 9338 | wolfgang.vater(a)unisys.com | Philipp-Reis-Str. 2 | 65795 Hattersheim [unisys_logo]<http://www.unisys.com/> Unisys Deutschland GmbH | Geschäftsführer: Sandro Lindner & Dr. Uwe Heckert | Sitz der Gesellschaft: Hattersheim | Amtsgericht: Frankfurt/Main HRB 7929 THIS COMMUNICATION MAY CONTAIN CONFIDENTIAL AND/OR OTHERWISE PROPRIETARY MATERIAL and is thus for use only by the intended recipient. If you received this in error, please contact the sender and delete the e-mail and its attachments from all computers. DIESE E-MAIL IST AUSSCHLIESSLICH FÜR DEN ADRESSATEN BESTIMMT UND KANN VERTRAULICHE INFORMATIONEN ENTHALTEN. Sollten Sie nicht der Adressat dieser Informationen sein, bitten wir Sie, sich mit dem Absender in Verbindung zu setzen und die Informationen von Ihren Endgeräten zu entfernen. [Grey_LI]<http://www.linkedin.com/company/unisys> [Grey_TW] <http://twitter.com/unisyscorp> [Grey_GP] <https://plus.google.com/+UnisysCorp/posts> [Grey_YT] <http://www.youtube.com/theunisyschannel> [Grey_FB] <http://www.facebook.com/unisyscorp> [Grey_Vimeo] <https://vimeo.com/unisys> [Grey_UB] <http://blogs.unisys.com/>

3 4

2 x feature request : Avoiding multiple entries for same devices & subgroups
by Jesper Frank Nemholt 20 Dec '16

20 Dec '16

Hi! 1. Especially with autodiscovery I get the same devices created multiple times as the hostname differ and Observium don't seem to always properly identify that the sysName and SNMP ID is the same. What I end up with is either the same device being in there twice. I also have this issue on some solutions using clustering and internal DNS & DHCP so nodes can have multiple IPs and DNS names and change these over time so the only constant is SNMP sysName and SNMP ID. What I am doing now as a workaround is to disable all but one entry per device when I see these duplicates, but it would be great to either have a better check to avoid this from the very beginning, or potentially to have something like what is present for syslog host mapping to allow a N to 1 mapping of devices like : $config['device']['host_map']['foo.bar'] = 'bar.foo'; // device hostname/sysname $config['device']['host_map']['foo.bar'] = 'foo.foo'; // device hostname/sysname With something like this in config.php I could then delete the duplicate entries and they would not be auto discovered again, and I'd avoid having to disable them. 2. The other thing is that it would be great if it was possible to create subgroups for devices, ports and custom OIDs. When having lots of groups for different areas or lots of custom OIDs it quickly gets crowded and having the ability to organize these in a group hierachy would be great, similar to how locations are grouped by country when using geo-coding. /Jesper

2 2

Software raid
by Simon Mousey Smith 20 Dec '16

20 Dec '16

Hi All, Daft question, we have a voip server with software raid in (FreePBX) Does Observium monitor the software raid? I see in the Observium_agent script it does ‘cat /proc/mdstat’ But what does it do? I can’t see any graphs or sensors for the raid? Only the md IO graphs? Regards Simon

3 2

trial observium
by ridwanfi 20 Dec '16

20 Dec '16

hi all, has been using observium for few days and we need to test the trial alert or notification, i know you guys don't provide trial license http://observium.observium.narkive.com/Ra0jsd8Z/professional-version-on-tri… hence if i need to buy subscription or contact sales team whom should I wrote to rgds Ridwan

2 1

NET ISO Routing support
by ecmp 20 Dec '16

20 Dec '16

NET ISO Routing support, debain 8 install, Observium CE 0.16.10.8128 Hi, I'm having trouble getting ISIS to work in observium. I apoligize if this has already been a topic in the email archive, but I was unable to view the archive and I couldn't find anything online relating to this. bgp, ospf, eigrp are all show in the edit-->routing section of the webui. Not ISIS. I know under poller discover modules these exist // Poller/Discovery Modules $config['enable_bgp'] = 1; // Enable BGP session collection and display $config['enable_rip'] = 1; // Enable RIP session collection and display $config['enable_ospf'] = 1; // Enable OSPF session collection and display $config['enable_isis'] = 1; // Enable ISIS session collection and display $config['enable_eigrp'] = 1; // Enable EIGRP session collection and display $config['enable_syslog'] = 0; // Enable Syslog $config['enable_vrfs'] = 1; // Enable VRFs $config['enable_sla'] = 1; // Enable SLA/RPM collection and display $config['enable_pseudowires'] = 1; // Enable Pseudowires digging a bit further, I found that uncommenting this section of the file ./includes/config-variables.inc.php would enable this setting on the webui. However isis data is still not collected and does not show up under device>routing. /// ROUTING ////////////////////////////////////////////////////////// $config_sections['routing']['text'] = "Routing"; $setting = 'enable_isis'; $config_variable[$setting]['section'] = "routing"; $config_variable[$setting]['subsection'] = "Protocols"; $config_variable[$setting]['name'] = "ISIS sessions"; $config_variable[$setting]['type'] = "bool"; $config_variable[$setting]['shortdesc'] = "Enable collection and display of ISIS data."; one thing I noticed is the bgp, ospf, and eigrp all have the name set to "<protocol> collection" while rip and isis have the name "<protocol> sessions." Finding these settings without a comment like "/* Unimplemented :)" makes me think that ISIS is supported, however I can't seem to find an existing module to support it within the CE. a quick grep of the observium directories seems to show that isis is lacking a poller module like: ./includes/polling/cisco-eigrp.inc.php ./includes/polling/ospf.inc.php ./includes/discovery/bgp-peers.inc.php grep -r 'isis' . (with a lot of output ommited) ./tests/HtmlIncludesFunctionsTest.php: array('isis', 'IS-IS'), ./includes/config-variables.inc.php:$setting = 'enable_isis'; ./includes/defaults.inc.php:$config['enable_isis'] = 1; // Enable ISIS session collection and display ./includes/definitions.inc.php:$config['routing_types']['isis'] = array('text' => 'ISIS'); Does anyone have ISIS working in observium? If so how? Thanks.

2 3

Problem with MIBs
by Xavier Bonell 16 Dec '16

16 Dec '16

Hello; I recently have installed the Community version of Observium on a CentOS 7 server, to test the functionalities and the configurations that gives; to decide if I it's worth to purchase for the Professional one. My question is about how can I select wich MIBs is going to use to obtain data. Because when I go to Devices -> Select Device -> Properties -> MIBs I find a list of MIBs that are used but not suitable for my device. How can I change it? Entering through the server's folders I have seen that are the MIBs that I need. How can I run it to get the appropiate data? Thanks!

2 3

Unable to sort rows by the last column for some data types
by Andy Lemin 15 Dec '16

15 Dec '16

Hi, At the risk of embarrassing myself again and making you laugh, for an obvious typo.. ;) And yes I have definitely checked this time I discovered this weekend that it is not possible to view some of the "Heath" charts in a sorted order. For example, Heath -> Temperature -> Click "Value". The rows seem to be sorted randomly for us. Is anyone else seeing this too? The following also all have the same problem 1) Health -> Processor -> Click "Processor" to sort by processor name, results in random sorting 2) Health -> Memory -> Click "Memory" to sort by Memory name, results in random sorting 3) Health -> Memory -> Click "Used" to sort by Used, results in very random sorting 4) Health -> Temperature -> Click "Value" to sort by temp, results in very random sorting 5) Health -> Fanspeed -> Click "Value" to sort by temp, results in very random sorting 6) Health -> Power -> Click "Value", results in random sorting Cheers, Andy.

4 5