- observium - lists.observium.org

Apache log path incorrect
by Joelly, Alexander 18 Apr '19

18 Apr '19

Hello, Just wanted to mention that the apache config file generated/installed from install script has an incorrect access and error log destination set. Should be: ErrorLog ${APACHE_LOG_DIR}/error.log CustomLog ${APACHE_LOG_DIR}/access.log combined instead: ErrorLog /error.log CustomLog /access.log combined Thanks, Alex

1 0

Alert Status widget mouseover popup on Dashboard
by Joelly, Alexander 17 Apr '19

17 Apr '19

Hello, On the Dashboard in the Alerts Status widget the mouseover popups for the 'Failed Tests' (small blue icon with the 'I') is not working - when going to the Alerts page it's working there. In the global settings the mouseover popups is enabled. Is that a known or already fixed issue or something on my side not set properly? r9774 Thanks, Alex

2 3

alerts in latest community version
by Tony Guadagno 17 Apr '19

17 Apr '19

Hi, I am currently using the current ce version (Observium CE 18.9.9420). After upgrading, i see the alerts have completely changed. the alerts i had still seem to function, but when I try to modify them, the fields are all different....I am getting the impression that there is an alert conversion script? I have looked for docs on how to use the new alerts but cannot find any. Can you please point me to a page that explains how to use the new alerts and how to fix the upgraded alerts. thanks!

1 0

Alert Status widget mouseover popup on Dashboard
by Joelly, Alexander 17 Apr '19

17 Apr '19

Hello, On the Dashboard in the Alerts Status widget the mouseover popups for the 'Failed Tests' (small blue icon with the 'I') is not working - when going to the Alerts page it's working there. In the global settings the mouseover popups is enabled. Is that a known or already fixed issue or something on my side not set properly? r9774 Thanks, Alex

1 0

No RAM graphs are displayed for network devices
by Vladimir R 16 Apr '19

16 Apr '19

Hello. I have observium version 19.3.9791. Apparently, earlier it was possible to monitor the amount of occupied RAM on network devices. In the application there is a screenshot which shows that there were such graph on the device. On new devices there are no such graphs. How can I fix this? Perhaps there is not enough parameter in the configuration? -- The best regards! Vladimir R.

4 6

how do you remove an association?
by Rowlands Mark 15 Apr '19

15 Apr '19

Running svn version. I just can't seem to find out how to remove an association for a custom oid.

1 0

Re: [Observium] Cisco ASA IPSec tunnels
by David Jesus Maturano Sanchez 11 Apr '19

11 Apr '19

This isn’t supported by ASA, there’s no way to do that for IPSec tunnels. David M. De: observium <observium-bounces(a)observium.org> en nombre de Johnathon Voegeli via observium <observium(a)observium.org> Responder a: Observium <observium(a)observium.org> Fecha: viernes, 1 de marzo de 2019, 11:38 Para: Observium <observium(a)observium.org> CC: Johnathon Voegeli <jvoegeli(a)voigtie.com> Asunto: [Observium] Cisco ASA IPSec tunnels Hey guys, Does anyone know where to set the “tunnel name” in a Cisco ASA or more rather where Observium gets that info? I have a dozen or so IPSec tunnels built, but Obs calls them all by the outside interface IP I suspect because I am too dense to figure out where its getting the tunnel name field from? [cid:image001.png@01D4D02B.AA8D38E0] The local address and the tunnel name are all the same.

2 1

OBS Integration with NFSen
by Ryan Huff 11 Apr '19

11 Apr '19

I -think-, I have NFSen integration with OBS working correctly, but I'm not clear on where I can see the flow graphs in OBS. I assume under the Graphs tab on the device page? Thanks, Ryan Huff, CCDP, CCNP Cisco Certified Network and Design Professional

5 7

Alert Checker question
by Tim Grossner 11 Apr '19

11 Apr '19

I have an Observium question - I am looking to create an alert for Palo Alto Networks firewall's session count, ideally one that fires when the session percentage goes above 85%. How would I build such a checker? I have tested a couple of different ways, and not been able to get one to fire. The MIB contains references such as: panSessionUtilization OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Session table utilization percentage. Values should be between 0 and 100." ::= { panSession 1 } ...can I build an alert based on panSessionUtilization? -- [image: GuidePoint Security] <http://www.guidepointsecurity.com> *Tim Grossner,* Engineer II *GuidePoint Security LLC* | Your Mission. Secured. *w* (877) 889-0132 x7605 *m* (636) 542-8464 *e* tim.grossner(a)guidepointsecurity.com Follow us! LinkedIn <http://www.linkedin.com/company/guidepoint-security> | Twitter <https://twitter.com/GuidePointSec> | Facebook <https://www.facebook.com/GuidePointSec> | Google+ <https://plus.google.com/+Guidepointsecurity/posts> | YouTube <https://www.youtube.com/channel/UCkajuS7JqEN3UGy6SXVhnfg> *GuidePoint Security recognized as recipient of 2018 Splunk Partner+ Awards! Read more <https://www.guidepointsecurity.com/2018/03/05/guidepoint-security-recognize…>* Confidentiality Notice: This communication constitutes an electronic communication within the meaning of the Electronic Communications Privacy Act, 18 U.S.C. Section 2510, and its disclosure is strictly limited to the recipient intended by the sender of this message. This transmission, and any attachments, may contain confidential information and work product(s). If you are not the intended recipient, any disclosure, copying, distribution or use of any of the information contained in or attached to this transmission is STRICTLY PROHIBITED. Please contact us immediately by return e-mail or call (877) 889-0132 <(877)%2520889-0132> option 5, and destroy the original transmission and its attachments without reading or saving in any manner.

2 1

RRD, Interfaces & docker
by Eduardo Costa 11 Apr '19

11 Apr '19

Hi all, This is my first post, and I'm a not so newbie user of Observium. If my question has been answered, or if its now correct, please advise. We're using Observium latest community edition as below: [cid:image001.png@01D4EFC3.4368A660] Situation: where monitoring a lot of virtual servers in a VMware environment, and we use docker in a lot of those vm's. What's happens is, as usual in docker, a lot of network devices are created, and observium correctly detects those ports. However in a small period of time they're gone, however Observium keep track of them, and keep the RRD files. In a specific case, we've got : [cid:image002.png@01D4EFC3.4368A660] Result... RRD for this server as... 200G! Anyone has had this problem? I was thinking about using the config['bad_if'][] with something similar of veth*, but I think is not possible. [cid:image003.png@01D4EFC3.899F0BB0] Any advice would be quite helpful! Thanks, EC _________________________________________________________________________ Eduardo Costa Administrador de Sistemas AIRC - Associação de Informática da Região Centro Coimbra iParque, Lote nº 15 3040-540 Antanhol - Coimbra +351-239-850569 | Direto +351-239-850599 | Fax eduardo.costa(a)airc.pt<mailto:eduardo.costa@airc.pt> | e-Mail

2 4