- observium - lists.observium.org

Port Realtime function not work
by Nurbek Suleimanov 21 Nov '17

21 Nov '17

Hi, On one server running Realtime, on the second server an error is issued: "Your browser does not support SVG! You need to either use Firefox, or Chrome, or download the Adobe SVG plugin. "

1 0

apache monitor Hits/s confusion
by Satish Patel 20 Nov '17

20 Nov '17

I am using apache monitor and has confusion in stats : http://docs.observium.org/apps/ It is showing Hits/s where this numbers coming from? I looked at agent script but didn't get any value calculating Hits/s

1 1

Extreme Networks Syslog Configuration
by FE1009 FE-DDIS.dk 19 Nov '17

19 Nov '17

Hi I having problem configure Extreme Networks Syslog format to match observium filter, logs from linux and Cisco are working config from ExtremeXOS version 15.6.1.4 v1561b4 configure syslog add 192.168.x.y:514 vr VR-Default local6 enable log target syslog 192.168.x.y:514 vr VR-Default local6 configure log target syslog 192.168.x.y:514 vr VR-Default local6 filter DefaultFilter severity Debug-Data configure log target syslog 192.168.x.y:514 vr VR-Default local6 match Any configure log target syslog 192.168.x.y:514 vr VR-Default local7 format timestamp seconds date yyyy-mm-dd event-name none priority tag-name /Kennet

3 4

Distributed poller question
by Vlad Kratsberg 17 Nov '17

17 Nov '17

Hi Everyone, Is there a way to associate a device with a particular poller ?

1 0

ASR-9000 PSU Status / Alarms
by Robert Williams 17 Nov '17

17 Nov '17

Hi all, Just noticed a strange problem with reporting alarms on the ASR9001 (XR5.3.4). A lab router was reloaded and when it came back up there is a "Major" chassis alarm as one of the two PSUs has failed. However, neither the PSU failure nor the 'MAJ' alarm status are detected by Observium. Even after a full discovery and polling, it is all green and happy on Observium it seems. In fact, it shows only 1 PSU now, even though two are installed and one is in a failed state: (All other 9001 have 2 x "ASR-9001 AC Power Supply" entries here) Console output confirms the fault and the presence of the major alarm, as well as a few different things (like N+1 resilience lost and 'Capacity') which could be used to detect this issue (if they are in Cisco-SNMP-land that is). #show env power R/S/I Modules Capacity Status (W) 0/PS0/M0/* host PM 750 Ok 0/PS0/M1/* host PM 0 Failed <<<<<<<< #show env power <snip> N+1 Supply Protected Capacity Available: Not Protected <<<<<<<< #show environment leds R/S/I Modules LED Status 0/RSP0/* host Critical-Alarm Off host Major-Alarm On <<<<<<<< host Minor-Alarm Off RP/0/RSP0/CPU0:RTR-123(admin)#show env power states Wed Nov 15 16:59:15.135 GMT R/S/I State MaxPower Time Count (1-ON/2-OFF) (W) (YY:WK:DD:HH:MIN:SS) ---------------------------------------------------------------------- 0/PS0/M0/* 1 750 00:00:00:00:59:27 1 2 0 00:00:00:00:00:00 0 ---------------------------------------------------------------------- 0/PS0/M1/* 1 0 00:00:00:00:00:00 0 2 0 00:00:00:00:59:27 1 <<<<<< '2 = Off' so......Can anything be done to tune-up the detection of such issues? In this case it was pure chance I noticed the fault after the reload as I had to be physically in front of it to patch something in. Otherwise I'd not have known. Any ideas? Cheers! Robert Williams Custodian Data Centres https://www.CustodianDC.com

3 5

Specify network interface for SNMP queries
by Wiethoff, Helge 16 Nov '17

16 Nov '17

Hi all, is it possible to configure the outgoing interface (eth0 for example) in Observium for all SNMP queries? Cheers! Helge

3 3

Re: [Observium] Juniper SRX4200 and transceivers sensors
by Youssef BENGELLOUN - ZAHR 15 Nov '17

15 Nov '17

4 14

Re: [Observium] Cisco Cat6500/7600 CPU/Memory stats changed?
by Ron Marosko 15 Nov '17

15 Nov '17

OK, confirmed it broke between r8930 and r8945. Rolled back to 8930 (well, 8929) and it all came back. ..Ron From: Ron Marosko [mailto:ron@rjr-services.com] Sent: Tuesday, November 14, 2017 6:27 PM To: observium(a)observium.org Subject: Cisco Cat6500/7600 CPU/Memory stats changed? Howdy Adam, et al., So I just noticed that my Cat6509 and Cat7609 aren't showing per-module CPU and memory statistics any more. I now have a single "Processor" entry/graph for the entire chassis. Image being worth 1000 words, one is attached. This specific chassis is full of linecards with DFC modules, and those were being graphed previously. I verified this is across the board on several different devices, not just one. Going to start playing with rolling back revisions to see if I can find where it broke. ..Ron -- Ron Marosko, Jr. . . . . . . . . . . . . . . . . . . . . . . . . . . CCIE No. 4526 (R/S), NN5DX Senior Network Engineer RJR Services, Inc. 1108 West Dickinson Blvd, Suite A Fort Stockton, TX 79735 USA o: +1 432 336 5600 x115 c: +1 432 290 6344 e: <mailto:ron@rjr-services.com> ron(a)rjr-services.com pgp pubkey: <http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x778B3B0258AB8B5C> 0x58AB8B5C "To know me is to fly with me."

1 1

Cisco Cat6500/7600 CPU/Memory stats changed?
by Ron Marosko 15 Nov '17

15 Nov '17

Howdy Adam, et al., So I just noticed that my Cat6509 and Cat7609 aren't showing per-module CPU and memory statistics any more. I now have a single "Processor" entry/graph for the entire chassis. Image being worth 1000 words, one is attached. This specific chassis is full of linecards with DFC modules, and those were being graphed previously. I verified this is across the board on several different devices, not just one. Going to start playing with rolling back revisions to see if I can find where it broke. ..Ron -- Ron Marosko, Jr. . . . . . . . . . . . . . . . . . . . . . . . . . . CCIE No. 4526 (R/S), NN5DX Senior Network Engineer RJR Services, Inc. 1108 West Dickinson Blvd, Suite A Fort Stockton, TX 79735 USA o: +1 432 336 5600 x115 c: +1 432 290 6344 e: <mailto:ron@rjr-services.com> ron(a)rjr-services.com pgp pubkey: <http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x778B3B0258AB8B5C> 0x58AB8B5C "To know me is to fly with me." -- This message has been scanned by E.F.A. Project and is believed to be clean.

1 0

No RRD since update to 17.11.8945
by Alex Fossa | amatis Networks 14 Nov '17

14 Nov '17

Hi All, Since the update to r8945 on Friday we are seeing no RRDs being updated. The error we are seeing is : [root@observium observium]# /opt/observium/poller-wrapper.py -d Traceback (most recent call last): File "/opt/observium/poller-wrapper.py", line 276, in <module> remote_rrd = config['rrd']['no_local'] KeyError: 'no_local' [root@observium observium]# Any ideas? Thanks, Alex [Amatis Networks] Alex Fossa | CTO T: 01183219944 E: alex.fossa(a)amatisnetworks.com | M: 07766548740

2 1