- observium - lists.observium.org

monitor device by multiple ips
by Simon Smith 20 Aug '14

20 Aug '14

Hi All, this is a daft random question, can i monitor a device via multiple ip addresses? for instance, we have a site with a mikrotik router, they currently have 3 internet lines (DONT ASK!) 2xADSL,1xFTTC currently we use PPPOE on the router so we can see the mikrotik directly, ive enabled SNMP remotely and i monitor the box via 1 of the ADSL lines, however its constantly goes up and down and never makes up its mind! the other issue i have is the FTTC line is dynamic ip and never stays the same for more then 48hrs so in my mind, /etc/hosts or DNS for site1.router goes to 1.2.3.4, 5.6.7.8, 9.10.11.12 then every check it always use one of three ip addresses ? am i correct? or is the another way of monitoring this device? regards Simon

6 11

Postgresql fails to execute?
by Kaya Saman 19 Aug '14

19 Aug '14

Hi, I'm running Observium on a FreeBSD 10.0-RELEASE x64 system. For some reason the Postgresql script isn't working; I have turned debugging on: set 0 -> 1 The output however just seems to be: ./postgresql.pl Execute Failed The odd thing is that other Perl based scripts are working on the same box. eg. Apache. the postgresql.conf file has the correct details: db_driver set to: Pg db_host is set to the IP address of the database Jail etc.... These modules are installed which I'm sure are the relevant ones: perl5-5.16.3_11 Practical Extraction and Report Language perl5-5.16.3_11 Practical Extraction and Report Language p5-Class-DBI-3.0.17_1 Simple Database Abstraction p5-Class-DBI-Pg-0.09_1 Extensions to Class::DBI for PostgreSQL p5-DBD-Pg-3.2.1 Provides access to PostgreSQL databases through the DBI p5-DBI-1.631 Perl5 Database Interface, required for DBD::* modules p5-DBIx-ContextualFetch-1.03 Add contextual fetches to DBI p5-Ima-DBI-0.35 Database connection caching and organization Would anyone be able to suggest anything? I have been looking at this: http://www.observium.org/wiki/Application/Postgresql but unfortunately it's not very helpful in my case. Permissions are also set properly. Thanks. Kaya ./postgresql.pl Execute failed ./postgresql.pl Execute failed root@Alpha-Ray: ./postgresql.pl Execute failed ./postgresql.pl Execute failed

1 0

Syslog msg empty temporary fix
by Pavelas Sokolovas 19 Aug '14

19 Aug '14

Hi, all. After dist upgrade from Ubuntu 12.04 to 14.04 syslog messages from cisco IOS devices became empty. There is a similar thread/bug: http://jira.observium.org/browse/OBSERVIUM-850 http://postman.memetic.org/pipermail/observium/2014-August/007527.html We’ve managed to work around it by changing: template ("$HOST||$FACILITY||$PRIORITY||$LEVEL||$TAG||$YEAR-$MONTH-$DAY $HOUR:$MIN:$SEC||$MSG||$PROGRAM\n") to: template ("$HOST||$FACILITY||$PRIORITY||$LEVEL||$TAG||$YEAR-$MONTH-$DAY $HOUR:$MIN:$SEC||:: : :: $MSG||$PROGRAM\n") in syslog config. For the developers: it happened after update of syslog/php to 3.5.3-1 [@9695e81] / PHP 5.5.9-1ubuntu4.3 from whatever was current on Ubuntu 12.04 LTS , worked fine before that. Also, the data examplesyslog sends to the script is: 10.x.x.x||local7||notice||notice||bd||2014-08-19 20:21:10||%SYS-5-CONFIG_I: Configured from console by xx on vty3 (10.x.x.xx)||BST Hope this helps! Pav Pavelas Sokolovas Custodian Data Centre Email: ps(a)CustodianDC.com http://www.CustodianDC.com

1 0

Billing history
by Simon Schmitz 19 Aug '14

19 Aug '14

hello, there is a plan for a billing history with over the last month? Greetings Simon

3 4

Question octets to Mbps conversion.
by Senses0 19 Aug '14

19 Aug '14

Hi, I am using below query to convert ifInOctets_rate to Mbps value. mysql> SELECT ifInOctets_rate, CONCAT(ROUND((ifInOctets_rate*8)/1024/1024,2), " Mbps") ConvertedValue FROM `ports-state` WHERE port_id=105; +-----------------+----------------+ | ifInOctets_rate | ConvertedValue | +-----------------+----------------+ | 55014356 | 419.73 Mbps | +-----------------+----------------+ The value I get different from the value printed on the graph for the same port_id. On the graph I got 427Mbps, while this conversion gives me 419. Since I don't know where in the code this conversion happens, I couldn't figure out if this is the way to go about it or not. Could someone shed some light? Thanks

4 6

Observium SNMP VMware Hosts
by Darian Jimenez 18 Aug '14

18 Aug '14

Hello, I am able to monitor pretty much everything from firewalls to switches but I am having problems with my vmware hosts. It will add the devices fine via SNMP but when it comes to polling them it will give an "SNMP UnreachableMySQL" after running the poller.php -h 'vmware host' It will show as down on the site and every now and then it comes back online. Then it will show as down again.Attached is a screenshot of the polling information.[image: Inline image 1]

2 1

Accessing our subscription
by Richard Berndt 18 Aug '14

18 Aug '14

We did purchase the subscription edition of Observium. How do we access the SVN?

2 1

Add_device fails at SNMP
by Richard Berndt 18 Aug '14

18 Aug '14

I am a little confused and looking for suggestions on what I can do to troubleshoot this issue. On the machine that I am running Observium on I can use snmpwalk to view the device’s system information. ubuntu@mgh-netmon:/opt/observium$ snmpwalk -Os -v 2c -c communitystring mx-hospital system sysDescr.0 = STRING: Meraki MX80 Cloud Managed Security Appliance sysObjectID.0 = OID: enterprises.29671.2.103 sysName.0 = STRING: MX-HOSPITAL sysORID.1 = OID: snmpMIB sysORID.2 = OID: vacmBasicGroup sysORID.3 = OID: ifMIB sysORDescr.1 = STRING: The MIB module for SNMPv2 entities sysORDescr.2 = STRING: View-based Access Control Model for SNMP. sysORDescr.3 = STRING: The MIB module to describe generic objects for network interface sub-layers sysORUpTime.1 = Timeticks: (1) 0:00:00.01 sysORUpTime.2 = Timeticks: (1) 0:00:00.01 sysORUpTime.3 = Timeticks: (16) 0:00:00.16 However when I use add_device it tells me that it cannot add the device. ubuntu@mgh-netmon:/opt/observium$ ./add_device.php mx-hospital communitystring v2c 161 udp Observium v0.14.4.5229 Add Device(s) Try to add mx-hospital: Trying v2c community communitystring ... No reply on community communitystring using v2c. Could not reach mx-hospital with given SNMP community using v2c. Devices skipped: 1. Any ideas? I know it Is not a network/firewall related issue since SNMPWALK can access the device. I know it is not an SNMP string issue because both SNMPWALK and another monitoring system is able to access this device using the provided SNMP string.

3 4

Up/Down Monitoring
by Lane Eckley 18 Aug '14

18 Aug '14

Hi Guys, I am attempting to setup an alert checker for when a server goes into a "down" state for either SNMP or Ping - ideally I would like to create one alert checker for each (ping & snmp). Reviewing the metrics documentation I believe I should be using a combination of the following two: device_status (0 = down, 1 = up) device_status_type (reason for down, 'snmp'/'ping') Using the above I am failing miserably it seems as I am unable to get the alert checker to "match" a machine I turned off to do the testing. Can anyone share a quick step by step on how to setup this alert checker correctly? Thanks! -Lane

3 4

Remove WiFi errors from dashboard
by Franjo Posavec 18 Aug '14

18 Aug '14

Is posible to remove wifi errors from dashboard, like on atachment? -- Franjo Posavec system administrator entitas d.o.o. M: +385 (0)98 8808 72 S: franjo.posavec

2 2