January 2024 - observium - lists.observium.org

Send email alerts only for some checkers, not all of them
by Silvio del Val Hinojal 11 Apr '25

11 Apr '25

Hello, First of all, congratulations for your great product :) I have been searching this the forum but I can't find an answer for this :( We are currently using Observium Pro v18.10.9500. I'm trying to configure emailing so that I would like to be notified on some alerts generated by some of the alert checkers but not all of them, but I'm not able to do it :( Currently I'm receiving email alerts from all of my checkers. This is my current "config.php": // Set up a default alerter (email to a single address) // $config['email']['default'] = ""; // $config['email']['default_only'] = TRUE; $config['email']['from'] = "< I omit this part, this is our current email, this is working >"; $config['email']['smtp_host'] = "< I omit, our SMTP email server >"; $config['email']['backend'] = "smtp"; // Mail backend. Allowed: "mail" (PHP's built-in), "sendmail", "smtp". $config['email']['smtp_timeout'] = 30; We have only one contact with our destination email address and we have associated only 4 of 7 defined alert checkers, but we are currently receiving email notifications from all of them. Thank you very much [cid:image001.png@01D03B1C.E8E96F80]<http://www.pandasecurity.com/spain/> Silvio del Val Systems Engineer - Panda Security +34 944 343 728 silvio.delval(a)pandasecurity.com<mailto:silvio.delval@pandasecurity.com> pandasecurity.com<http://www.pandasecurity.com/> This e-mail contains confidential information owned by Panda Security. Any such copy, or use, or distribution or disclosure of its contents is strictly forbidden. Please notify us immediately at our phone number (+34 94 425 11 00) if you receive this e-mail and are not its consignee, and then delete this message from your system without copying it, distributing it, or disclosing its contents P Before printing this message, please make sure it is really necessary

5 9

User access levels
by Tibor Marchyn 06 Dec '24

06 Dec '24

Hi, I have another beginner question please. I have setup Active Directory authentication, but how can I limit users to exact devices? I really do not want for some users to see anything else than they need to and all of them have level 1 access. And I can't see any option to limit them or assign user to device. Also it would be great to assign users to exact device group I have created. Thanks a lot Tibor

2 2

How to add a device which only responds to ping/icmp?
by Thomas Stather 23 Aug '24

23 Aug '24

Hi How can i add a device which cannot (!) speak any snmp and only responds to ping/icmp requests? We have an Aruba wlan setup (Mobility Master and two Mobility Controllers) and i want to add the aps to Observium, so that they are monitored but only by ping/icmp. (The MM and the two MCs are already added to Observium, but i cannot see if one AP went offline or came back online again) The aps cannot speak any snmp when managed by the MM or MC, thats why it fails when i try to add one via ./add_device.php I appreciate any help :) Best, Thomas -- Thomas Stather IT Services VCP4, VCP6-DCV, VCP6.5-DCV Tel: +49 6221 486 628 Fax: +49 6221 486 561 Bevor Sie diese Mail ausdrucken, prüfen Sie bitte ob dies wirklich nötig ist. Umweltschutz geht uns alle an!

10 15

Observium doesn't show interfaces within VPRN on Nokia routers
by Tao Zhang 21 Aug '24

21 Aug '24

Hi Observium team, We are using Observium as a main tool to monitor our router interfaces and collect SNMP stats. We recently replaced our Juniper routers with Nokia SR 7750. We noticed that Observium doesn't work very well with Nokia routers. Observium can only show the interfaces in the master instance, not the interfaces within VPRN or VPLS instances (Nokia call those interfaces SAPs). To be able to see interfaces within VPLS or VPRN, we need to enable two other MIBs, TIMETRA-SAP-MIB and TIMETRA-VRTR-MIB. We are not sure how to enable those two MIBs. Do we need to add them manually? This is the MIBs enabled on the Nokia router (default). [cid:ece89bfc-3ae2-4dcd-9c7c-641c3978f803] Any suggestion is greatly appreciated. Thanks, Tao

1 1

Missing some nice stats from Cisco 9800 that I got from Cisco 5520
by andri＠harpa.is 12 Aug '24

12 Aug '24

Hi Our organization recently upgraded from Cisco 5520 WLC to Cisco 9800 WLC. In observium I get really good statistics about wireless client count and wireless ap count on the 5520 but not on the 9800. I am not sure if this is something on observium side or cisco side. But I wanted to ask if anyone has the same issue and if they found a solution. Or maybe this is just something that needs to be added. Please let me know if there is any further information I can submit. Best regards Andri

4 6

Many devices shown as down(dns)
by Marios.P＠crowe.com.cy 19 Jul '24

19 Jul '24

Hello all, I can see in my observium installation that many devices changed their status to down(dns). This is a new installation and we migrated the configuration yesterday on a new server and devices were working properly. At around the same time (14:20:00) a lot of our machines changed their status to down. The message in the Event log is "Device status changed to Down (dns)". I tried to find what the problem may be but I can see SNMP are correct and dns records exist for the systems. Any ideas? Thank you, Marios

6 7

dark ui image legend legibility
by Wolf Noble 16 Feb '24

16 Feb '24

Howdy, all! is there some voodoo necessary to coerce observium to generate graphs with textual legends that aren't black when dark mode is active? it's kinda hard to view black text on dark blue backgrounds :) I don't see an obvious knob for this, but it's entirely possible I'm just missing the "legend text color" or "make graph text legible in dark mode" or "learn to read" button somewhere :) [= The contents of this message have been written, read, processed, erased, sorted, sniffed, compressed, rewritten, misspelled, overcompensated, lost, found, and most importantly delivered entirely with recycled electrons =]

3 22

regarding STP change alert
by Gurupad Deshmukh 27 Jan '24

27 Jan '24

Dear team, can we monitor stp change and broadcasting in cisco/huawei switches please help to configure STP change alert. regards, gurupad.

1 0

Re: observium Digest, Vol 162, Issue 17
by Chris Wopat 25 Jan '24

25 Jan '24

> > Date: Wed, 24 Jan 2024 15:41:29 -0700 > From: Brad Bendy <brad.bendy(a)gmail.com> > Subject: [Observium] FEC errors / FEC statistics > To: Observium <observium(a)lists.observium.org> > > Hi, > > We've got various Juniper devices with links that have FEC enabled and > CLI output shows the FEC stats, but I don't see them anywhere in > Observium. > > Is this not supported or am I missing something to where it's at / > what is it called? > We opened a JTAC case about this a year or so ago. At the time, there is NO fec available via ANY snmp mib. "we currently do NOT have support for Ethernet FEC Statistics via SNMP. There is a feature request that has been created internally to add support for it" Ask your SE about "RLI 46223" --Chris

2 1

Error in Observium
by Luis Enrique Torres Jacinto 25 Jan '24

25 Jan '24

Hello, good morning I have a problem seeing the information of 3 Cisco CBS350 Switches in observium (professional version), I add them normally like any other device, however it does not show me its Processor, Temperature, fanspeed, Status Indicators, etc. [cid:image006.jpg@01DA4F7C.759355E0] In other Cisco Switch models the tool works correctly. [cid:image007.jpg@01DA4F7C.759355E0] With the following command ./discovery.php -h 10.1.X.X. we found the following error: [cid:image005.png@01DA4F7C.5F5A1890] If anyone can support me I would appreciate it. Greetings

1 0