April 2024 - observium - lists.observium.org

Device first discovery date
by Attila Nagy 09 Oct '25

09 Oct '25

Hi Everyone! Is there a way to find out the date of the "first contact" with a device from Observium? I mean for example the date when the first discovery was run on a specific device, or something like this? (Currently the device's event log runs out after half a year.) Any ideas? Regards, Tylla

4 5

Send email alerts only for some checkers, not all of them
by Silvio del Val Hinojal 11 Apr '25

11 Apr '25

Hello, First of all, congratulations for your great product :) I have been searching this the forum but I can't find an answer for this :( We are currently using Observium Pro v18.10.9500. I'm trying to configure emailing so that I would like to be notified on some alerts generated by some of the alert checkers but not all of them, but I'm not able to do it :( Currently I'm receiving email alerts from all of my checkers. This is my current "config.php": // Set up a default alerter (email to a single address) // $config['email']['default'] = ""; // $config['email']['default_only'] = TRUE; $config['email']['from'] = "< I omit this part, this is our current email, this is working >"; $config['email']['smtp_host'] = "< I omit, our SMTP email server >"; $config['email']['backend'] = "smtp"; // Mail backend. Allowed: "mail" (PHP's built-in), "sendmail", "smtp". $config['email']['smtp_timeout'] = 30; We have only one contact with our destination email address and we have associated only 4 of 7 defined alert checkers, but we are currently receiving email notifications from all of them. Thank you very much [cid:image001.png@01D03B1C.E8E96F80]<http://www.pandasecurity.com/spain/> Silvio del Val Systems Engineer - Panda Security +34 944 343 728 silvio.delval(a)pandasecurity.com<mailto:silvio.delval@pandasecurity.com> pandasecurity.com<http://www.pandasecurity.com/> This e-mail contains confidential information owned by Panda Security. Any such copy, or use, or distribution or disclosure of its contents is strictly forbidden. Please notify us immediately at our phone number (+34 94 425 11 00) if you receive this e-mail and are not its consignee, and then delete this message from your system without copying it, distributing it, or disclosing its contents P Before printing this message, please make sure it is really necessary

5 9

User access levels
by Tibor Marchyn 06 Dec '24

06 Dec '24

Hi, I have another beginner question please. I have setup Active Directory authentication, but how can I limit users to exact devices? I really do not want for some users to see anything else than they need to and all of them have level 1 access. And I can't see any option to limit them or assign user to device. Also it would be great to assign users to exact device group I have created. Thanks a lot Tibor

2 2

Buy subscription via invoice / bank transfer ?
by anders.jonsson＠norconsult.com 21 Oct '24

21 Oct '24

Hello, Thanks for your excellent software. We are very interested in buying a Professional Subscription subscription (to begin with) but we don't have company issued cards and not allowed to used paypal either. Is there any possibility to do a invoice / bank transfer instead ?

3 2

How to add a device which only responds to ping/icmp?
by Thomas Stather 23 Aug '24

23 Aug '24

Hi How can i add a device which cannot (!) speak any snmp and only responds to ping/icmp requests? We have an Aruba wlan setup (Mobility Master and two Mobility Controllers) and i want to add the aps to Observium, so that they are monitored but only by ping/icmp. (The MM and the two MCs are already added to Observium, but i cannot see if one AP went offline or came back online again) The aps cannot speak any snmp when managed by the MM or MC, thats why it fails when i try to add one via ./add_device.php I appreciate any help :) Best, Thomas -- Thomas Stather IT Services VCP4, VCP6-DCV, VCP6.5-DCV Tel: +49 6221 486 628 Fax: +49 6221 486 561 Bevor Sie diese Mail ausdrucken, prüfen Sie bitte ob dies wirklich nötig ist. Umweltschutz geht uns alle an!

10 15

Observium doesn't show interfaces within VPRN on Nokia routers
by Tao Zhang 21 Aug '24

21 Aug '24

Hi Observium team, We are using Observium as a main tool to monitor our router interfaces and collect SNMP stats. We recently replaced our Juniper routers with Nokia SR 7750. We noticed that Observium doesn't work very well with Nokia routers. Observium can only show the interfaces in the master instance, not the interfaces within VPRN or VPLS instances (Nokia call those interfaces SAPs). To be able to see interfaces within VPLS or VPRN, we need to enable two other MIBs, TIMETRA-SAP-MIB and TIMETRA-VRTR-MIB. We are not sure how to enable those two MIBs. Do we need to add them manually? This is the MIBs enabled on the Nokia router (default). [cid:ece89bfc-3ae2-4dcd-9c7c-641c3978f803] Any suggestion is greatly appreciated. Thanks, Tao

1 1

Missing some nice stats from Cisco 9800 that I got from Cisco 5520
by andri＠harpa.is 12 Aug '24

12 Aug '24

Hi Our organization recently upgraded from Cisco 5520 WLC to Cisco 9800 WLC. In observium I get really good statistics about wireless client count and wireless ap count on the 5520 but not on the 9800. I am not sure if this is something on observium side or cisco side. But I wanted to ask if anyone has the same issue and if they found a solution. Or maybe this is just something that needs to be added. Please let me know if there is any further information I can submit. Best regards Andri

4 6

Oxidized Integration?
by Wiethoff, Helge 05 Aug '24

05 Aug '24

Hi, I am currently testing a replacement for rancid. Rancid has worked for a long time, but adding new device classes feels more and more unwieldy. Oxidized [1] makes a good first impression and I was able to add new device classes without big problems. Then of course I would also like to see an integration with my favorite network management tool :-) There are people who have already worked on this: https://github.com/colin-stubbs/observium-oxidized It looks like this patch doesn't quite work for current observium versions, so I'd like to ask if anyone is working on it and what are the chances that there could be an Observium integration (professional edition)? Thanks Helge [1] https://github.com/ytti/oxidized

3 4

Many devices shown as down(dns)
by Marios.P＠crowe.com.cy 19 Jul '24

19 Jul '24

Hello all, I can see in my observium installation that many devices changed their status to down(dns). This is a new installation and we migrated the configuration yesterday on a new server and devices were working properly. At around the same time (14:20:00) a lot of our machines changed their status to down. The message in the Event log is "Device status changed to Down (dns)". I tried to find what the problem may be but I can see SNMP are correct and dns records exist for the systems. Any ideas? Thank you, Marios

6 7

Help with UNIX Agent and Bind
by Timothy Stoddard 23 Apr '24

23 Apr '24

All, I would like some help with the UNIX Agent. I have been able to get the agent up and running on the device and listen on port 36602 which in turn the Observium server can communicate with. I have UNIX Agent turned on in Obervium config and the server does show me a button to turn on "BIND" with a slider button. When I slide the BIND button to ON and press save Observium says "No Application found on this device." I have provided screenshots. What am I missing because I am close to getting this working. I am running Observium 24.3.13396 (stable) Thanks, -- Tim

2 5