August 2024 - observium - lists.observium.org

Device first discovery date
by Attila Nagy 09 Oct '25

09 Oct '25

Hi Everyone! Is there a way to find out the date of the "first contact" with a device from Observium? I mean for example the date when the first discovery was run on a specific device, or something like this? (Currently the device's event log runs out after half a year.) Any ideas? Regards, Tylla

4 5

Send email alerts only for some checkers, not all of them
by Silvio del Val Hinojal 11 Apr '25

11 Apr '25

Hello, First of all, congratulations for your great product :) I have been searching this the forum but I can't find an answer for this :( We are currently using Observium Pro v18.10.9500. I'm trying to configure emailing so that I would like to be notified on some alerts generated by some of the alert checkers but not all of them, but I'm not able to do it :( Currently I'm receiving email alerts from all of my checkers. This is my current "config.php": // Set up a default alerter (email to a single address) // $config['email']['default'] = ""; // $config['email']['default_only'] = TRUE; $config['email']['from'] = "< I omit this part, this is our current email, this is working >"; $config['email']['smtp_host'] = "< I omit, our SMTP email server >"; $config['email']['backend'] = "smtp"; // Mail backend. Allowed: "mail" (PHP's built-in), "sendmail", "smtp". $config['email']['smtp_timeout'] = 30; We have only one contact with our destination email address and we have associated only 4 of 7 defined alert checkers, but we are currently receiving email notifications from all of them. Thank you very much [cid:image001.png@01D03B1C.E8E96F80]<http://www.pandasecurity.com/spain/> Silvio del Val Systems Engineer - Panda Security +34 944 343 728 silvio.delval(a)pandasecurity.com<mailto:silvio.delval@pandasecurity.com> pandasecurity.com<http://www.pandasecurity.com/> This e-mail contains confidential information owned by Panda Security. Any such copy, or use, or distribution or disclosure of its contents is strictly forbidden. Please notify us immediately at our phone number (+34 94 425 11 00) if you receive this e-mail and are not its consignee, and then delete this message from your system without copying it, distributing it, or disclosing its contents P Before printing this message, please make sure it is really necessary

5 9

Building an Observium appliance
by Serge Caron 16 Dec '24

16 Dec '24

It's time I give something back to the community. This project, GitHub - SergeCaron/observium_appliance: Build and maintain an Observium appliance<https://github.com/SergeCaron/observium_appliance>, is aimed at SMB environments and walks the sysadmin through each phase of creating and maintaining (backup, restore, upgrade) an Observium appliance. It also covers the installation of Let's Encrypt certificates, secure (https) access to the Observium web site, basic email configuration for notifications, and log aggregation. It's basically a recipe with scripts. A small appliance with fault tolerant network configuration is shown to emphasize the standalone nature of the project. Of course, any virtual environment can do ;-) I hope I kept the typos and omissions to a minimum. Regards, Serge Caron

4 4

User access levels
by Tibor Marchyn 06 Dec '24

06 Dec '24

Hi, I have another beginner question please. I have setup Active Directory authentication, but how can I limit users to exact devices? I really do not want for some users to see anything else than they need to and all of them have level 1 access. And I can't see any option to limit them or assign user to device. Also it would be great to assign users to exact device group I have created. Thanks a lot Tibor

2 2

Buy subscription via invoice / bank transfer ?
by anders.jonsson＠norconsult.com 21 Oct '24

21 Oct '24

Hello, Thanks for your excellent software. We are very interested in buying a Professional Subscription subscription (to begin with) but we don't have company issued cards and not allowed to used paypal either. Is there any possibility to do a invoice / bank transfer instead ?

3 2

API Error 500
by Nicolas Korten 18 Sep '24

18 Sep '24

Hello dear Observium Team, I'm trying to add a device using the API and get an error 500 message instead of the expected notice that the device is not respondig to snmp. > curl -u korten:secret https://observium.domain.net/api/v0/devices/ -X POST -d '{"hostname":"pe-lab02.domain.net", "snmp_community":"test", "ping_skip":"on"}' <h1>500 Internal Server Error</h1><h3>flight\Engine::_json(): Argument #2 ($code) must be of type int, string given, called in /opt/observium/libs/flight3/core/Dispatcher.php on line 86 (0)</h3><pre>#0 /opt/observium/libs/flight3/core/Dispatcher.php(86): flight\Engine->_json() #1 /opt/observium/libs/flight3/core/Dispatcher.php(50): flight\core\Dispatcher->runEvent() #2 /opt/observium/libs/flight3/Engine.php(113): flight\core\Dispatcher->run() #3 [internal function]: flight\Engine->__call() #4 /opt/observium/libs/flight3/core/Dispatcher.php(287): call_user_func_array() #5 /opt/observium/libs/flight3/Flight.php(143): flight\core\Dispatcher::invokeMethod() #6 /opt/observium/html/api/v0/includes/devices.inc.php(133): Flight::__callStatic() #7 [internal function]: api_add_device() #8 /opt/observium/libs/flight3/core/Dispatcher.php(250): call_user_func_array() #9 /opt/observium/libs/flight3/core/Dispatcher.php(237): flight\core\Dispatcher::callFunction() #10 /opt/observium/libs/flight3/Engine.php(508): flight\core\Dispatcher::execute() #11 /opt/observium/libs/flight3/core/Dispatcher.php(86): flight\Engine->_start() #12 /opt/observium/libs/flight3/core/Dispatcher.php(50): flight\core\Dispatcher->runEvent() #13 /opt/observium/libs/flight3/Engine.php(113): flight\core\Dispatcher->run() #14 [internal function]: flight\Engine->__call() #15 /opt/observium/libs/flight3/core/Dispatcher.php(287): call_user_func_array() #16 /opt/observium/libs/flight3/Flight.php(143): flight\core\Dispatcher::invokeMethod() #17 /opt/observium/html/api/v0/index.php(66): Flight::__callStatic() #18 {main}</pre> As far as I can see, the error is in: api/v0/includes/devices.inc.php at line 133: >Flight::json($json, '400'); should be: Flight::json($json, 400); Agree? Thank you and have a nice day, Nico -- Nicolas Korten Dipl.-Ing. Systemtechnik und Dienste/EDV komro GmbH Am Innreit 2 DE-83022 Rosenheim Telefon: +49 8031 365 7913 Telefax: +49 8031 365 7699 Mail: korten(a)komro.net / http://www.komro.net __________________________________________________________________________________________________________ Geschäftsführer: Dipl. Ing. Gert Vorwalder Vorsitz im Aufsichtsrat: Oberbürgermeister Andreas März Sitz der Gesellschaft: Rosenheim Registergericht: Traunstein, HRB-Nr. 10689 USt.-IdNr.: DE 188814299 Hinweise zur Verarbeitung Ihrer personenbezogenen Daten gem Art. 13 DSGVO: Verantwortlich für die Verarbeitung Ihrer personenbezogenen Daten im Rahmen des vorliegenden Kontakts ist die komro GmbH Weitere Informationen zur Verarbeitung Ihrer Daten, insbesondere zu den Ihnen zustehenden Rechten, können Sie unserer Homepage unter https://www.komro.net/datenschutz entnehmen oder auf jedem anderen Wege unter den o.g. Kontaktdaten bei uns erfragen.

4 7

Incorrect sensor limits caused by duplicate unit conversion
by Corwin Ziegler Hunts 04 Sep '24

04 Sep '24

The definition for the temperature sensor on a CyberPower PDU (or UPS) environmental sensor accessory defines both "unit" and "limit_unit" as "F". This seems to cause the limit values to get converted (to Celsius) twice: first in "entity_limits_definition" using "limit_unit" and then in "discover_sensor_ng" using "sensor_unit" which is set from "unit". For us, the SNMP read limits of 59 and 90 F end up as -9.44 and 0.12 C on the sensor in Observium. This is on version r13629. Simply not setting "limit_unit" is a workaround if both the sensor and limit values use the same unit (maybe that is preferred when defining sensors?). If the units are different a proper fix is needed. Also, is this the preferred method for reporting this kind of issue? Corwin

2 3

How to add a device which only responds to ping/icmp?
by Thomas Stather 22 Aug '24

22 Aug '24

Hi How can i add a device which cannot (!) speak any snmp and only responds to ping/icmp requests? We have an Aruba wlan setup (Mobility Master and two Mobility Controllers) and i want to add the aps to Observium, so that they are monitored but only by ping/icmp. (The MM and the two MCs are already added to Observium, but i cannot see if one AP went offline or came back online again) The aps cannot speak any snmp when managed by the MM or MC, thats why it fails when i try to add one via ./add_device.php I appreciate any help :) Best, Thomas -- Thomas Stather IT Services VCP4, VCP6-DCV, VCP6.5-DCV Tel: +49 6221 486 628 Fax: +49 6221 486 561 Bevor Sie diese Mail ausdrucken, prüfen Sie bitte ob dies wirklich nötig ist. Umweltschutz geht uns alle an!

10 15

Observium doesn't show interfaces within VPRN on Nokia routers
by Tao Zhang 21 Aug '24

21 Aug '24

Hi Observium team, We are using Observium as a main tool to monitor our router interfaces and collect SNMP stats. We recently replaced our Juniper routers with Nokia SR 7750. We noticed that Observium doesn't work very well with Nokia routers. Observium can only show the interfaces in the master instance, not the interfaces within VPRN or VPLS instances (Nokia call those interfaces SAPs). To be able to see interfaces within VPLS or VPRN, we need to enable two other MIBs, TIMETRA-SAP-MIB and TIMETRA-VRTR-MIB. We are not sure how to enable those two MIBs. Do we need to add them manually? This is the MIBs enabled on the Nokia router (default). [cid:ece89bfc-3ae2-4dcd-9c7c-641c3978f803] Any suggestion is greatly appreciated. Thanks, Tao

1 1

Re: How to add a device which only responds to ping/icmp?
by Croene Jan (PZ Antwerpen) 20 Aug '24

20 Aug '24

Dear, We bought the license to monitor devices via ping-check (with the probe functionality). "Observium is designed to collect and display data from SNMP-capable devices, but not every device supports SNMP. In order to monitor non-SNMP capable devices, the probes system can be used to perform checks on non-SNMP devices". I am just wondering how we can add a device in observium that cannot handle snmp? ________________________________ Als u niet de beoogde ontvanger van deze email bent, lees onze disclaimer<https://www.politie.be/nl/maildisclaimer>. Si vous n'?tes pas le destinataire pr?vu de cet email, lisez notre disclaimer<https://www.politie.be/fr/maildisclaimer>. Wenn Sie nicht der beabsichtigte Empf?nger dieser email sind, lesen Sie unseren disclaimer<https://www.politie.be/de/maildisclaimer>. If you aren't the intended recipient of this email, read our disclaimer<https://www.politie.be/en/maildisclaimer>.

2 1

Observium stops displaying stats for all monitored hosts for a period of time
by Kevin Riahi 20 Aug '24

20 Aug '24

Hello Team, It seems Observium stops displaying stats for all (most) monitored hosts for a period of time and then back to normal.!!! I've attached a few screenshots. Has this behavior been documented in the past? If not what is the best way to debug this. Observium ver 24.8.13606 Running on a dedicated server. 12 Core Xeon Proc 64 GB RAM Raided SSD drives. Thank you Kevin Riahi

3 3

Running on a subdomain
by d.wiersma＠dw-its.nl 20 Aug '24

20 Aug '24

Hi, I want to run overservium on a subdomain. My main domain is https://dw-its.nl Is it possible to run in under observium.dw-its.nl?

2 1

Bandwidth alerts based on value in "Device Port Parsed Speed"
by Brad Bendy 14 Aug '24

14 Aug '24

Hi, Checked around and can't figure out a way to do this and don't see anything in mailing list about it. Is there a way to build alerts based on the bandwidth value we are setting this way? For example we have a description of "[600Mbit]" and then want to alert on 80% of this value for example. I don't see a way to do this as the test conditions are all the parameters from SNMP. Obviously can make up a checker and do the math manually and what not but would not auto adjust and I need 100+ of these created. Would anyone else find this helpful? Thanks

1 0

Missing some nice stats from Cisco 9800 that I got from Cisco 5520
by andri＠harpa.is 12 Aug '24

12 Aug '24

Hi Our organization recently upgraded from Cisco 5520 WLC to Cisco 9800 WLC. In observium I get really good statistics about wireless client count and wireless ap count on the 5520 but not on the 9800. I am not sure if this is something on observium side or cisco side. But I wanted to ask if anyone has the same issue and if they found a solution. Or maybe this is just something that needs to be added. Please let me know if there is any further information I can submit. Best regards Andri

4 6

aerohive devices
by antero.vasconcelos＠truenet.pt 09 Aug '24

09 Aug '24

Hi team is there a way to view the wlans on aerohive AP and connected clients? what mib shoud be enabled? Anterov

2 1

Bug report: Broken scaling on some SFP receive power graphs
by Corwin Ziegler Hunts 09 Aug '24

09 Aug '24

Hi Observium team, We're having issues with some of the generated graphs. Some of our devices report the light level received by SFPs using mW (rather than dBm). We are on the latest stable revision (13582). Issue 1: The graphs generated by Observium for these sensors usually show an excessive scale of at least -100 mW to 100 mW when the data in the specified time interval are entirely within the range 100 nW to 1 mW and usually only a small chunk of that. The calculated minimum and maximum values shown below the graph are correct. These graphs worked properly in the past with a prior version of Observium. Issue 2: Selecting and deselecting the Force Autoscale option appears to have no effect on the generated graph or displayed rrd graph command. Manually running the generated rrd graph command after removing the "--alt-autoscale" option results in a good graph. Here is the raw SNMP output for one of the these sensors showing a current value of 0.5560mW: ENTITY-SENSOR-MIB::entPhySensorType.1000004631 = INTEGER: watts(6) ENTITY-SENSOR-MIB::entPhySensorScale.1000004631 = INTEGER: milli(8) ENTITY-SENSOR-MIB::entPhySensorPrecision.1000004631 = INTEGER: 4 ENTITY-SENSOR-MIB::entPhySensorValue.1000004631 = INTEGER: 5560 ENTITY-SENSOR-MIB::entPhySensorOperStatus.1000004631 = INTEGER: ok(1) Corwin

5 12

Switch overview: configurable interface sorting?
by Wiethoff, Helge 06 Aug '24

06 Aug '24

Hello everyone, The port sorting in the device overview has been changed at some point. Previously, it was sorted alphanumerically, but now the numbers are prioritized. Before, the order was A1, A2, A3..., B1, B2, B3, etc. And now it is A1, B1, A2, B2..., A3, B3, etc. Is there a way to change the sorting back to the old method using a configuration switch? Thank you and best regards Helge

2 1

Percent CPU
by Arnoldo Vidal Bravo 05 Aug '24

05 Aug '24

Hi, cuestion. we have about 600+ devices (switchs, wireless, router), we want know CPU usage on each one . On many devices we see 93% CPU usage. but login into device we can see only 1 measure and shows less than 7% on slot 0.0. While on observium we have 3 measures: processor, processor 1 and slot 0.0. please helpus to get the right measure. example [image: image.png] [image: image.png] [image: image.png] on centos 7 from CLI [image: image.png] -- Saluda cordialmente

1 0

Missing rebuild buttons for groups and alert checkers
by Corwin Ziegler Hunts 05 Aug '24

05 Aug '24

Hi, We use Observium groups extensively, often nested several times. Our alert checkers then reference these groups. After making changes to a group, including by adding a device, we used to force rebuilds of the groups (possibly several times) and checkers so the changes would propagate all the way through. We are on the latest stable revision (r13582) and the rebuild buttons are no longer available in the UI (possibly removed in r13391). What should we do now when we need to forcibly propagate changes? Corwin

2 2

Oxidized Integration?
by Wiethoff, Helge 05 Aug '24

05 Aug '24

Hi, I am currently testing a replacement for rancid. Rancid has worked for a long time, but adding new device classes feels more and more unwieldy. Oxidized [1] makes a good first impression and I was able to add new device classes without big problems. Then of course I would also like to see an integration with my favorite network management tool :-) There are people who have already worked on this: https://github.com/colin-stubbs/observium-oxidized It looks like this patch doesn't quite work for current observium versions, so I'd like to ask if anyone is working on it and what are the chances that there could be an Observium integration (professional edition)? Thanks Helge [1] https://github.com/ytti/oxidized

3 4

Polling - Real time port graphs are different on devices that run Linux natively
by ruben.aninoiu＠zananet.com 01 Aug '24

01 Aug '24

Hi Guys, I have noticed that the real-time graphs for devices that run Linux natively (JunosOS, UnifiOS, etc) display the traffic with "intervals in between". The non-native Linux devices (FortiOS, Cisco IOS) provide a nicer real-time graph for port traffic when polled. Is there something that could be adjusted so that the native Linux devices show the nicer graph? Best regards, Ruben

2 1