- observium - lists.observium.org

Re: [Observium] can't ping error from inside Observium
by Tom Laermans 13 Aug '15

13 Aug '15

Disagree! :) On Aug 13, 2015 5:45 PM, Adam Armstrong <adama(a)memetic.org> wrote: > > Oh yes. I keep forgetting people can add from the web interface. > > I vote to remove adding from the web interface. Again. > > adam. >> >> On 13/08/2015 16:36:40, Tom Laermans <tom.laermans(a)powersource.cx> wrote: >> >> Most likely selinux is not letting apache exec fping. >> >> Tom >> >> On Aug 13, 2015 3:24 PM, Michael Ponto wrote: >> > >> > Good morning all >> > I have a new server setup with Centos 7 and Observium >> > Everything looks good except I can't add any devices. >> > I get an error that says it can't ping the device. >> > >> > I can ping when logged in from the terminal by IP and by Name. >> > FPing also works from the console. >> > IP tables and Firewall have been turned off for trouble shooting. >> > I can add users etc. >> > This is a replacement box so the devices are all configured correctly. >> > >> > Total loss here. >> > >> > _______________________________________________ >> > observium mailing list >> > observium(a)observium.org >> > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

4 3

Re: [Observium] can't ping error from inside Observium
by Tom Laermans 13 Aug '15

13 Aug '15

1 0

Re: [Observium] can't ping error from inside Observium
by ron＠rjr-services.com 13 Aug '15

13 Aug '15

As a CLI person, I agree with Adam. :-) Sent from my Verizon Wireless 4G LTE DROID Tom Laermans <tom.laermans(a)powersource.cx> wrote: -- This message has been scanned by E.F.A. Project and is believed to be clean.

2 1

Re: [Observium] Alert checking on port state change
by Tom Laermans 13 Aug '15

13 Aug '15

Protip: the below statement is not true, there's a toggle for number of seconds to renotify. But indeed, no per-checker config, that one is true ;) Tom On Aug 13, 2015 7:03 AM, Adam Armstrong <adama(a)memetic.org> wrote: > > Hi Tim, > > At the moment Observium is hardcoded to re-notify alerts after 24 hours. > > I think that your use case would be helped by being able to turn this off on a per-checker basis. > > I'll add it to the list :) > > Adam. > > Sent with AquaMail for Android > http://www.aqua-mail.com > > On 12 August 2015 9:02:30 pm Tim Vaughan <tim(a)timvaughan.co.uk> wrote: >> >> Hi all, I'm starting to get my head around Observium alerts. >> >> I want to be alerted if a switch port that was previously down comes up, and vice versa. I don't want to get repeatedly alerted when a port is down (or up), only when it changes state. At the moment I'm using tests "ifAdminStatus equals up" and "ifOperStatus notequals up" for one alert, but I appear to be getting notifications each time the poller runs. Any suggestions on how I can get what I want? >> >> Cheers, >> >> Tim >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>

1 0

Re: [Observium] can't ping error from inside Observium
by Tom Laermans 13 Aug '15

13 Aug '15

Most likely selinux is not letting apache exec fping. Tom On Aug 13, 2015 3:24 PM, Michael Ponto <MPonto(a)team-psc.com> wrote: > > Good morning all > I have a new server setup with Centos 7 and Observium > Everything looks good except I can't add any devices. > I get an error that says it can't ping the device. > > I can ping when logged in from the terminal by IP and by Name. > FPing also works from the console. > IP tables and Firewall have been turned off for trouble shooting. > I can add users etc. > This is a replacement box so the devices are all configured correctly. > > Total loss here. > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Alert checking on port state change
by Tim Vaughan 13 Aug '15

13 Aug '15

Hi all, I'm starting to get my head around Observium alerts. I want to be alerted if a switch port that was previously down comes up, and vice versa. I don't want to get repeatedly alerted when a port is down (or up), only when it changes state. At the moment I'm using tests "ifAdminStatus equals up" and "ifOperStatus notequals up" for one alert, but I appear to be getting notifications each time the poller runs. Any suggestions on how I can get what I want? Cheers, Tim

2 2

can't ping error from inside Observium
by Michael Ponto 13 Aug '15

13 Aug '15

Good morning all I have a new server setup with Centos 7 and Observium Everything looks good except I can't add any devices. I get an error that says it can't ping the device. I can ping when logged in from the terminal by IP and by Name. FPing also works from the console. IP tables and Firewall have been turned off for trouble shooting. I can add users etc. This is a replacement box so the devices are all configured correctly. Total loss here.

2 1

Re: [Observium] svn Checksum mismatch error
by Tom Laermans 13 Aug '15

13 Aug '15

I'll give you that, though i'm pretty sure they also switched to snmp-mibs-downloader :) On Aug 13, 2015 7:51 AM, Adam Armstrong <adama(a)memetic.org> wrote: > > Ubuntu doesn't seem to have quite so much OS-zealotry-fuelled hatred for its users as Debian, though! ;) > > adam. >> >> On 13/08/2015 06:49:46, Tom Laermans <tom.laermans(a)powersource.cx> wrote: >> >> >> On Aug 13, 2015 7:01 AM, Adam Armstrong wrote: >> > >> > Also, I'd recommend Ubuntu, it has fewer strange quirks than Debian. :) >> >> I highly recommend Debian over Ubuntu for exactly that reason :) >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Re: [Observium] false device down alerts
by Rudolf Hoehler 13 Aug '15

13 Aug '15

Hello Sujith, When you set an alert you can set the number of polling runs before the alert actually fires. Under Alert Checkers set the "Alert Delay" for the checker to 3 or 4 and see if the results improve. If you are polling every minute you might start a polling run while the previous polling run is still happening. I would up this from 1 minute to about 2 or 3 minutes at least. Would be good to hear other comments on the fast polling time. Rudolf From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> on behalf of "Samarasinghe, Sujith" <Sujith.Samarasinghe(a)Squarepoint-Capital.com<mailto:Sujith.Samarasinghe@Squarepoint-Capital.com>> Reply-To: "observium(a)observium.org<mailto:observium@observium.org>" <observium(a)observium.org<mailto:observium@observium.org>> Date: Thursday 13 August 2015 at 07:14 To: "observium(a)observium.org<mailto:observium@observium.org>" <observium(a)observium.org<mailto:observium@observium.org>> Subject: [Observium] false device down alerts Hi Team, How to avoid false device down alerts? I think it just single ping and small network glitch on observium server to monitor device alerts are device down. I am polling every minutes though. Is there any way to let observium at least poll second time and alert device is down? Thanks, Sujith. Confidentiality Note: This e-mail and any attachments are confidential and may be protected by legal privilege. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of this e-mail or any attachment is prohibited. If you have received this e-mail in error, please notify us immediately by returning it to the sender and delete this copy from your system. Thank you for your cooperation.

3 4

Re: [Observium] svn Checksum mismatch error
by Tom Laermans 13 Aug '15

13 Aug '15

On Aug 13, 2015 7:01 AM, Adam Armstrong <adama(a)memetic.org> wrote: > > Also, I'd recommend Ubuntu, it has fewer strange quirks than Debian. :) I highly recommend Debian over Ubuntu for exactly that reason :)

2 1