- observium - lists.observium.org

Unexplained alerts for array controller
by eey＠pml.ac.uk 03 Feb '25

03 Feb '25

We've got a pair of new alerts for a Dell file server having several attached drive arrays. One alert clearly refers to the array controller; it is not clear to what the other refers, other than that it is storage-related. These alerts are: Drive ID 4 storage 3h 17m 52s ago alert fail Drive Controller PERC H730P Mini (Embedded) 3 storage 3h 19m 5s ago alert fail These alerts appeared immediately after starting the Systemd service dsm_sa_datamgrd, which had failed for an unknown reason. I believe this service runs an agent for the Dell OpenManage monitoring portal. Even after the restart of this service, that portal is reporting that it cannot communicate with the system. The iDRAC for this system reports no faults, and all relevant lights on it are green. The system appears to be working, in that the files it serves are available as normal. Do you have any ideas how to take this investigation forward? I see that a similar thread https://lists.observium.org/hyperkitty/list/observium@lists.observium.org/m… was opened nearly a year ago, but this did not receive any responses.

1 0

MIB integration
by Pavel Vraštiak 02 Feb '25

02 Feb '25

Hi, I am not able to correctly detect OS and use MIBs for Bridgetech probes... would you be willing to integrate them? I thought that sysDescr Bridgetech probe might be sufficient to identify this but I might be wrong as this particular virtual appliance is running on linux - they also have dedicated HW appliances. ___ _ _ / _ \ | |__ ___ ___ _ __ __ __(_) _ _ _ __ ___ | | | || '_ \ / __| / _ \| '__|\ \ / /| || | | || '_ ` _ \ | |_| || |_) |\__ \| __/| | \ V / | || |_| || | | | | | \___/ |_.__/ |___/ \___||_| \_/ |_| \__,_||_| |_| |_| Observium Professional 24.12.13796 https://www.observium.org ##### Starting discovery run at 2025-01-31 09:45:09 ##### ##### name [78] ##### +-------------+-----------------------+ | OID | | +-------------+-----------------------+ | sysDescr | Bridgetech probe | | sysObjectID | .1.3.6.1.4.1.24562.10 | +-------------+-----------------------+ o OS Type generic o OS Group unix o SNMP Version v1 o Last discovery 2025-01-31 09:38:00 o Last duration 2.69 seconds ##### Module Start: os ##### -- S pozdravem Ing. Pavel Vraštiak

2 1

Graph is not showing properly
by sagar＠nstplnet.com 26 Jan '25

26 Jan '25

Hi Team, Recently our observium server crashed we changed the HDD & installed as fresh config new versionbut today mrng onwards it will be not showing proper graph. Even webserver also runnning slow. Can u please help me on this. ---- Thanks & Regards Sagar Penti NOC HEAD +91 7977783978 sagar(a)nstplnet.com www.nstplnet.com NAVKAR SUPERTECH PVT LTD Unit No 201 Building No F6, Bhumi World Industrial Park, Pimplas, Bhiwandi, Thane-421302

2 1

How to upgrade Observium?
by Bar Russo 20 Jan '25

20 Jan '25

I can see now that Observium has newer version [cid:image001.png@01DB6A87.FD1C2150] . Is there any guide how to upgrade Observium? Best regards, Bar Russo | Information Technology Phone: 03-9546064 Address: Ariel Sharon 8 blvd. Or-Yehuda Linkedin<https://www.linkedin.com/company/77639321/admin/> | Facebook<https://www.facebook.com/mgroup.mgar> | Mgrp.co.il [תמונה שמכילה גופן, גרפיקה, לוגו, עיצוב גרפי התיאור נוצר באופן אוטומטי]<https://www.mgar.co.il/>

2 3

Observium Integration with MS Teams
by lalit.gupta＠gfl.co.in 20 Jan '25

20 Jan '25

Hi, I am trying to integrate Observium alerts with MS Teams. I am not able to receive alerts on MS Teams. The same is successful when I try to integrate an external webhook-test.com site and passing the parameters in Observium. Any suggestions would be helpful. Regards Lalit

1 0

Time rules for contacts
by noc＠green.ch 19 Jan '25

19 Jan '25

Hi all, We are encountering the following issue and would like to request a new feature to address it. Problem: We have several alert checkers, such as "interface down," configured with time-based conditions for office hours (08:00–18:00) and with "send recovery notification" option enabled. This results in a recovery message being sent at 18:00, even if the interface is still down. Proposed Solution: To resolve this issue, we suggest moving the time restrictions from the alert checker to the contact settings. Specifically, we propose adding the ability to configure time and weekday restrictions directly in the contact settings (e.g., for email contacts). These settings could mirror the time and weekday conditions currently available in alert checkers. For example: Time: between 08:00 and 18:00 Weekdays: 1, 2, 3, 4, 5 This feature would allow us to better manage notifications and avoid unnecessary recovery messages outside office hours. Thank you for considering this request, and we look forward to your response. Best regards, Raphael

1 0

Serial number SFP module switch ARUBA 6000+
by Arnoldo Vidal Bravo 13 Jan '25

13 Jan '25

hi. On our observium we can find SFP modules (searching by serial) installed on switch HP 2530 or Aruba 2530, but search on switch Aruba CX 6000+ not work. we can't find these information to know where is physically located. we appreciate helpus. -- Saluda cordialmente

2 1

webhook Teams 400 bad request
by staf.vangestel＠vitohoogstraten.be 13 Jan '25

13 Jan '25

"Hello, we started using Observium a while back (Observium CE 24.4.13528). I want to receive notifications within our Team in case of issues, so I created a webhook in Teams and added it in Observium under contacts. However, when I perform a test with `test_alert.php`, I get the error message '400 Bad Request' with the error 'Summary or Text is required'. I've read a lot about this issue, but I haven't been able to resolve it. I'm not very skilled at debugging, but I did test with Webhoo.site, and that works. Also, when I run `curl -H "Content-Type: application/json" -d '{"text": "Hello"}' https://xxxxxx`, the "Hello" message arrives in the Team. So why does it fail with `test_alert.php` (and also with the alerts)? Thank you in advance for any response." Staf Van Gestel Vito Hoogstraten --- Let me know if you need any further adjustments!

2 4

Ports of transit data resume
by Arnoldo Vidal Bravo 04 Jan '25

04 Jan '25

HELLO, I need to configure an alert for ports with transit description. To know which are transit ports I hope to use the network map. How can I export the data generated with the network map in a table? [image: image.png] The image shows a button to export data, but not in a table. -- Saluda cordialmente

2 1

Monitoring UPS
by Bar Russo 26 Dec '24

26 Dec '24

Hey there. I have UPS of Solar Edge and I succeed to monitor it via the Observium. The thing is, that beside if it's up or down I don't get any information about it. Such as Battery status, etc. Do I need to add some specific OID's or something? Thanks in advance. Best regards, Bar Russo | Information Technology Phone: 03-9546064 Address: Ariel Sharon 8 blvd. Or-Yehuda Linkedin<https://www.linkedin.com/company/77639321/admin/> | Facebook<https://www.facebook.com/mgroup.mgar> | Mgrp.co.il [תמונה שמכילה גופן, גרפיקה, לוגו, עיצוב גרפי התיאור נוצר באופן אוטומטי]<https://www.mgar.co.il/>

2 1