- observium - lists.observium.org

Ubiquity Serial Numbers / Wireless (WLAN) mac
by Lyndon Labuschagne 27 Apr '22

27 Apr '22

Hi A few years ago we were able to pull the Ubiquiti Radio MAC / Serial numbers from the Observium DB. I no longer see any serial numbers listed for Ubiquiti devices if I query the device table in the DB directly, and it’s not shown on the device screen in the Observium interface. When running a manual poller.php run the serial number field is <empty>, Is there something that changed on the Observium or Ubiquiti side or is the a module that I may need to enable? Any ideas or input would be welcome. Regards Lyndon

3 5

FW: Observium LDAP Integration
by Valerie Lim 27 Apr '22

27 Apr '22

From: Valerie Lim Sent: Wednesday, 27 April 2022 10:07 am To: Adam Thompson <athompson(a)merlin.mb.ca> Cc: Ryan Tee <ryan.tee(a)acclivis.com>; Nirmolak Singh Bajaj <nirmolak.singhbajaj(a)acclivis.com> Subject: RE: Observium LDAP Integration Hi Adam Thanks for your response. I am able to successfully execute an LDAP query via command-line. Also, I will try to configure my LDAP server according to your advice & see the changes. Meanwhile, could you elaborate a bit more on what needs to be done on the client side for Observium? Currently, I am running Ubuntu Desktop 20.04 & have only enabled the base PHP module required for Observium to read LDAP settings. & other than enabling LDAP service on the server itself, is there any additional settings that needs to be done to allow client to reach LDAP server? I have attached below the command I've used for the LDAP query & some user details I've got via the query. Best Regards Valerie Lim Command used: ldapsearch -x -b "dc=domain01,dc=com" -H ldap://192.168.1.234 -D "cn=Administrator,ou=acclivis,dc=domain01,dc=com" -W "objectclass=user" Results: # extended LDIF # # LDAPv3 # base <dc=domain01,dc=com> with scope subtree # filter: objectclass=user # requesting: ALL # # Administrator, acclivis, domain01.com dn: CN=Administrator,OU= acclivis,DC=domain01,DC=com objectClass: top objectClass: person objectClass: organizationalPerson objectClass: user cn: Administrator description: Built-in account for administering the computer/domain distinguishedName: CN=Administrator,OU= acclivis,DC=domain01,DC=com instanceType: 4 whenCreated: 20220413051658.0Z whenChanged: 20220427015103.0Z uSNCreated: 8196 memberOf: CN=Group Policy Creator Owners,CN=Users,DC=domain01,DC=com memberOf: CN=Domain Admins,CN=Users,DC=domain01,DC=com memberOf: CN=Enterprise Admins,CN=Users,DC=domain01,DC=com memberOf: CN=Schema Admins,CN=Users,DC=domain01,DC=com memberOf: CN=Administrators,CN=Builtin,DC=domain01,DC=com uSNChanged: 36881 name: Administrator objectGUID:: zY3U88tQd0CIs1ncaHNQ9A== userAccountControl: 66048 badPwdCount: 0 codePage: 0 countryCode: 0 badPasswordTime: 0 lastLogoff: 0 lastLogon: 132949181574995316 pwdLastSet: 132942924570197446 primaryGroupID: 513 objectSid:: AQUAAAAAAAUVAAAAL/6g3LnZPK6eKnuJ9AEAAA== adminCount: 1 accountExpires: 9223372036854775807 logonCount: 22 sAMAccountName: Administrator sAMAccountType: 805306368 objectCategory: CN=Person,CN=Schema,CN=Configuration,DC=domain01,DC=com isCriticalSystemObject: TRUE dSCorePropagationData: 20220420091258.0Z dSCorePropagationData: 20220413053253.0Z dSCorePropagationData: 20220413053253.0Z dSCorePropagationData: 20220413051743.0Z dSCorePropagationData: 16010714042016.0Z lastLogonTimestamp: 132954978631684796 # gt09, acclivis, domain01.com dn: CN=gt09,OU= acclivis,DC=domain01,DC=com objectClass: top objectClass: person objectClass: organizationalPerson objectClass: user cn: gt09 givenName: gt09 distinguishedName: CN=gt09,OU= acclivis,DC=domain01,DC=com instanceType: 4 whenCreated: 20220420085359.0Z whenChanged: 20220420090537.0Z displayName: gt09 uSNCreated: 32997 memberOf: CN=grouping,OU= acclivis,DC=domain01,DC=com uSNChanged: 33031 name: gt09 objectGUID:: Q06xdIEFa0iWmks3+zuUTQ== userAccountControl: 66048 badPwdCount: 0 codePage: 0 countryCode: 0 badPasswordTime: 0 lastLogoff: 0 lastLogon: 0 pwdLastSet: 132949184398814009 primaryGroupID: 513 objectSid:: AQUAAAAAAAUVAAAAL/6g3LnZPK6eKnuJOggAAA== accountExpires: 9223372036854775807 logonCount: 0 sAMAccountName: gt09 sAMAccountType: 805306368 userPrincipalName: gt09(a)domain01.com<mailto:gt09@domain01.com> objectCategory: CN=Person,CN=Schema,CN=Configuration,DC=domain01,DC=com dSCorePropagationData: 16010101000000.0Z mail: valerie.lim(a)acclivis.com<mailto:valerie.lim@acclivis.com> From: Adam Thompson <athompson(a)merlin.mb.ca<mailto:athompson@merlin.mb.ca>> Sent: Tuesday, 26 April 2022 9:29 pm To: Observium <observium(a)observium.org<mailto:observium@observium.org>> Cc: Valerie Lim <valerie.lim(a)acclivis.com<mailto:valerie.lim@acclivis.com>> Subject: RE: Observium LDAP Integration That's very similar to what we're doing here successfully. The differences I see are: $config['auth_ldap_attr']['uid'] = "UserPrincipalName"; $config['auth_ldap_attr']['dn'] = "distinguishedname"; $config['auth_ldap_objectclass'] = "person"; $config['auth_ldap_server'] = "ldaps://xx.xx.xx"; $config['auth_ldap_groups']['CN=xx,OU=xx,DC=xx,DC=xx']['level'] = 10; $config['auth_ldap_port'] = 636; This lets us log in with our full UPN, which happens to also be our email address. You may want to keep sAMAccountName if you want to log in with bare userids instead of UPNs. Not sure if the "dn" line is required or not, I don't remember what that does. Objectclass might also trip you up - "person" is the standard LDAP ObjectClass for an AD userid. Are you able to successfully execute an LDAP query from the command-line using "ldapsearch" (typically found in the "openldap-clients" package or similar)? I would start there, to prove your Observium server can actually reach your DC and run a query successfully, before trying to enable LDAP in Observium. You can't do a non-TLS LDAP bind on 389 by default, which is why we use 636 and ldaps. IIRC, something has to be done on the client (Observium) side to allow OpenLDAP to accept the internal AD-generated TLS certificate the AD server offers, but I can't find it right now. -Adam Adam Thompson Consultant, Infrastructure Services [MERLIN] 100 - 135 Innovation Drive Winnipeg, MB, R3T 6A8 (204) 977-6824 or 1-800-430-6404 (MB only) athompson(a)merlin.mb.ca<mailto:athompson@merlin.mb.ca> www.merlin.mb.ca<http://www.merlin.mb.ca/> From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> On Behalf Of Valerie Lim via observium Sent: Monday, April 25, 2022 9:16 PM To: observium(a)observium.org<mailto:observium@observium.org> Cc: Valerie Lim <valerie.lim(a)acclivis.com<mailto:valerie.lim@acclivis.com>> Subject: [Observium] Observium LDAP Integration Hi I am currently using professional v22.4.11952 for Observium. I am unable to authenticate my Observium via my LDAP server (Windows Server 2019). When 'ldap' is applied, authentication doesn't work. php module required for Observium has already been installed. Below is my config.php configuration: // Authentication Model $config['auth_mechanism'] = "ldap"; // default, other options: ldap, http-auth, please s> $config['auth_ldap_binddn'] = "cn=Administrator,cn=Users,dc=domain01,dc=com"; $config['auth_ldap_bindpw'] = "xxxxxxx"; $config['auth_ldap_attr']['uid'] = "sAMAccountName"; $config['auth_ldap_attr']['uidNumber'] = "objectSid"; $config['auth_ldap_attr']['cn'] = "name"; $config['auth_ldap_objectclass'] = "user"; $config['auth_ldap_version'] = 3; $config['auth_ldap_server'] = "server01.domain01.com"; $config['auth_ldap_port'] = 389; $config['auth_ldap_starttls'] = FALSE; $config['auth_ldap_prefix'] = "cn="; $config['auth_ldap_suffix'] = ",ou=acclivis,DC=domain01,DC=com"; $config['auth_ldap_group'] = array("cn=grouping,ou=acclivis,DC=domain01,DC=com"); $config['auth_ldap_groupbase'] = "cn=grouping,ou=acclivis,DC=domain01,DC=com"; $config['auth_ldap_groupmembertype'] = "nondn"; $config['auth_ldap_groupmemberattr'] = "member"; unset($config['auth_ldap_groups']); $config['auth_ldap_groups']['test']['level'] = 10; Is there something I missing out on my LDAP configuration? Please advise. Thanks Best Regards Valerie Lim

1 0

Observium LDAP Integration
by Valerie Lim 26 Apr '22

26 Apr '22

Hi I am currently using professional v22.4.11952 for Observium. I am unable to authenticate my Observium via my LDAP server (Windows Server 2019). When 'ldap' is applied, authentication doesn't work. php module required for Observium has already been installed. Below is my config.php configuration: // Authentication Model $config['auth_mechanism'] = "ldap"; // default, other options: ldap, http-auth, please s> $config['auth_ldap_binddn'] = "cn=Administrator,cn=Users,dc=domain01,dc=com"; $config['auth_ldap_bindpw'] = "xxxxxxx"; $config['auth_ldap_attr']['uid'] = "sAMAccountName"; $config['auth_ldap_attr']['uidNumber'] = "objectSid"; $config['auth_ldap_attr']['cn'] = "name"; $config['auth_ldap_objectclass'] = "user"; $config['auth_ldap_version'] = 3; $config['auth_ldap_server'] = "server01.domain01.com"; $config['auth_ldap_port'] = 389; $config['auth_ldap_starttls'] = FALSE; $config['auth_ldap_prefix'] = "cn="; $config['auth_ldap_suffix'] = ",ou=acclivis,DC=domain01,DC=com"; $config['auth_ldap_group'] = array("cn=grouping,ou=acclivis,DC=domain01,DC=com"); $config['auth_ldap_groupbase'] = "cn=grouping,ou=acclivis,DC=domain01,DC=com"; $config['auth_ldap_groupmembertype'] = "nondn"; $config['auth_ldap_groupmemberattr'] = "member"; unset($config['auth_ldap_groups']); $config['auth_ldap_groups']['test']['level'] = 10; Is there something I missing out on my LDAP configuration? Please advise. Thanks Best Regards Valerie Lim

2 1

Cloud networks monitoring option in Observium
by Jan Horacek 26 Apr '22

26 Apr '22

Good morning guys, I want to ask you if there is any development thread which will introduce cloud services monitoring into observium. I don`t mean the classic monitoring way of vhost via SNMP, but over API calls directly from the cloud tools. We are currently transferring our network capabilities from the standard setup to CloudWan and looking for the monitoring options and our vision is to concentrate monitoring features in observium dashboards. I appreciate any hints or tips. Thanks

1 0

Aborted connection xxxxxx to db
by Ross [Eve IT] 21 Apr '22

21 Apr '22

Hello peoples, Hope you are all well! I know this is not specifically an observium issue, but was hoping someone could shed some light on the problem if they have also experienced it. This is on a new build, fresh install; Debian 11 using the automated observium script; Every time the cron job triggers, every 5 minutes, I get this warning. bservium' host: 'localhost' (Got an error reading communication packets) Apr 21 09:35:01 SoMuchForSubtlety mariadbd[13023]: 2022-04-21 9:35:01 15776 [Warning] Aborted connection 15776 to db: 'observium' user: 'observium' host: 'localhost' (Got an error reading communication packets) Apr 21 09:40:01 SoMuchForSubtlety mariadbd[13023]: 2022-04-21 9:40:01 15880 [Warning] Aborted connection 15880 to db: 'observium' user: 'observium' host: 'localhost' (Got an error reading communication packets) Apr 21 09:45:01 SoMuchForSubtlety mariadbd[13023]: 2022-04-21 9:45:01 15985 [Warning] Aborted connection 15985 to db: 'observium' user: 'observium' host: 'localhost' (Got an error reading communication packets) Apr 21 09:50:01 SoMuchForSubtlety mariadbd[13023]: 2022-04-21 9:50:01 16090 [Warning] Aborted connection 16090 to db: 'observium' user: 'observium' host: 'localhost' (Got an error reading communication packets) Apr 21 09:55:01 SoMuchForSubtlety mariadbd[13023]: 2022-04-21 9:55:01 16194 [Warning] Aborted connection 16194 to db: 'observium' user: 'observium' host: 'localhost' (Got an error reading communication packets) Apr 21 10:00:01 SoMuchForSubtlety mariadbd[13023]: 2022-04-21 10:00:01 16300 [Warning] Aborted connection 16300 to db: 'observium' user: 'observium' host: 'localhost' (Got an error reading communication packets) Apr 21 10:05:01 SoMuchForSubtlety mariadbd[13023]: 2022-04-21 10:05:01 16404 [Warning] Aborted connection 16404 to db: 'observium' user: 'observium' host: 'localhost' (Got an error reading communication packets) Apr 21 10:10:01 SoMuchForSubtlety mariadbd[13023]: 2022-04-21 10:10:01 16509 [Warning] Aborted connection 16509 to db: 'observium' user: 'observium' host: 'localhost' (Got an error reading communication packets) It doesn't seem to be affecting the application, Observium is graphing and monitoring just fine. Has anyone solved this issue? Kind regards, Ross.

2 1

relative times/dates
by David Milton 20 Apr '22

20 Apr '22

Hello, When trying to document events it’s more useful (at least to me) to see that something happened at 01:55 than it is to see it happened 9:23 hours ago. That doesn’t mean it’s not useful to know how long ago an event happened but it seems recently, knowing when the event happened is more important that knowing how long ago that was. Is there any way to disable temporarily or permanently the “relative” times in the event log and syslog? Thanks, Dave.

2 1

how does "ignore until" under device/alert settings work?...looking for a "in maintenance" mode for a device
by Tony Guadagno 20 Apr '22

20 Apr '22

Sorry if this is an obvious question but I have been playing with this and it does not behave the way I am expecting... under device properties/alerts there is an "ignore until" option as well as a "disable notifications" toggle.... [cid:image003.jpg@01D8530A.33555B80] If I set the "ignore until" to sometime in the future and I (for example) restart the device...I still get alerted. If I toggle the "disable notifications" , I do not get the notifications anymore...however, it stays disabled past the "ignore until" time How is this feature supposed to work? I am looking for a way to put a device in "maintenance mode" so that if I am upgrading etc...no alerts are generated and no notifications are sent.

5 11

add-on?
by McGranahan, Jamen (VU) 18 Apr '22

18 Apr '22

Is there an add-on or a separate module that will provide the DNS entries for each server? We have various servers running multiple websites and it would help us if we had one interface that contained this data along with everything else that Observium provides. Jamen McGranahan Associate Director of Library Technology & Digital Services Jean and Alexander Heard Libraries, Vanderbilt University 615-343-1614 | jamen.mcgranahan(a)vanderbilt.edu<mailto:jamen.mcgranahan@vanderbilt.edu> he/his/him [cid:image001.png@01D8531B.9A603B90]

1 0

Observium running in Ubuntu Server / How to ensure data at REST encrypted with AES256 / data encryption at rest
by Ryan Tee 18 Apr '22

18 Apr '22

Hi , Subject - Data encryption at REST ( AES256 ) How to verify and ensure data at REST encrypted with AES256 Observium running in Ubuntu Server. When at rest, data can be subject to malicious threats such as data theft or data corruption by obtaining physical access to the storage hardware. Do share us information if any comments for this. Thank you Regards Ryan **************************************** There are three states for digital data: data in use, data in transit and data at rest. * Data in use refers to active data stored in non-persistent volumes, typically RAM or CPU caches. * Data in transit is the state where data is transferred over a network, either private or public. * Data at rest means inactive data that is stored physically on persistent storage, i.e. disks, databases, data warehouses, mobile devices, archives, etc.

2 2

Observium @ Ubuntu - - TLS v1.2 and TLS v1.3 is for communications between webservers and database servers ( different systems and machines )
by Ryan Tee 14 Apr '22

14 Apr '22

Hi We are concerned security between Observium that running in Ubuntu systems ( 18.04 and 20.04 ) How to check and confirm TLS v1.2 or above had been configured as default , for communications between webservers and database servers ( different systems and machines ) Do share us information if any comments. Thank you. Regards Ryan

1 0

Re: [Observium] ping only device monitoring
by adama＠observium.org 13 Apr '22

13 Apr '22

No one else is reading because at some point I accidentally replied directly instead of to the list 😊 But I did now! Adam. From: Tony Guadagno <tonyg(a)guadagno.org> Sent: 13 April 2022 17:54 To: adama(a)observium.org Subject: RE: [Observium] ping only device monitoring Adam, I separate list that is independent would be good also…I hope others reading this will voice their support!!!!!!!!!!!!!!!!! Thanks From: adama(a)observium.org <mailto:adama@observium.org> <adama(a)observium.org <mailto:adama@observium.org> > Sent: Wednesday, April 13, 2022 12:52 PM To: Tony Guadagno <tonyg(a)guadagno.org <mailto:tonyg@guadagno.org> > Subject: RE: [Observium] ping only device monitoring This is why we recommend the probe is attached to the Observium server’s own device entry in Observium. The ping-only host thing isn’t feasible in the existing devices paradigm, it would break the UI and a lot of other expectations about devices. Observium is 95% “showing data we got from SNMP”. The thing we’d likely create is a separate list of devices that didn’t support SNMP and didn’t actually interact with anything that currently exists in Observium, except probes, so we’d need a bunch of exceptions to the probe code to handle things with a device record and things without in the probes code. No one seems to ask much about it once we show them how to do the probes workaround, so we don’t look at it much. Adam. From: Tony Guadagno <tonyg(a)guadagno.org <mailto:tonyg@guadagno.org> > Sent: 13 April 2022 17:22 To: adama(a)observium.org <mailto:adama@observium.org> Subject: RE: [Observium] ping only device monitoring Adam, I was able to get this all working, thanks for your help. Please excuse me if I am preaching to the choir but I do have some feedback. I want to start out by saying that I would love it if all devices supported SNMP, that would be ideal, but reality is that there are devices that will never have SNMP agents on them. In this particular case, it’s a banks ATM’s. For security reasons, SNMP will never be a feature for these devices. There are other examples as well, for instance, I also want to my ISP’s router so I can tell when I go down, are they down as well. So, ping only devices are abundant and persistent, they will not be going away. Setting up a probe will get me by, but there are several problems. The first is it seems you need to associate the probe with an existing host...so it looks like the probe is for that host (even though it is not). What happens if I delete the host...will the probes go away? Also, I have not yet seen a notification, but does the notification show the hosts name associated with the probe? If so, that will be confusing to techs who might not be aware they have to read further. What is really needed is the ability to add a device that is ping only and stand alone, not dependent on any other host. Obviously, all the info for that device would be unavailable except ping times but this would be much clearer. I think, given how important ping only devices can be, it should be a priority to get this right. Finally, let me say that I have worked in the past with MRTG and HP Openview and more recently with NagiosXI, PRTG and Shinken. Observium is BY FAR, the best of them. A ping only host is one of the few things that they all can do, but you cannot. Thanks for listening, if you want, I would be happy to put in a feature request. From: adama(a)observium.org <mailto:adama@observium.org> <adama(a)observium.org <mailto:adama@observium.org> > Sent: Wednesday, April 13, 2022 11:19 AM To: Tony Guadagno <tonyg(a)guadagno.org <mailto:tonyg@guadagno.org> > Subject: RE: [Observium] ping only device monitoring Same way you alert on everything else, it’s just another entity type, similar to status with ok/alert status https://docs.observium.org/entities/#probes Adam. From: Tony Guadagno <tonyg(a)guadagno.org <mailto:tonyg@guadagno.org> > Sent: 13 April 2022 16:17 To: adama(a)observium.org <mailto:adama@observium.org> Subject: RE: [Observium] ping only device monitoring Oh, so you just pick a host in the pulldown, but that gets ignored when you use -H? ok. is there a way to alert on a probe? From: adama(a)observium.org <mailto:adama@observium.org> <adama(a)observium.org <mailto:adama@observium.org> > Sent: Wednesday, April 13, 2022 11:12 AM To: Tony Guadagno <tonyg(a)guadagno.org <mailto:tonyg@guadagno.org> > Subject: RE: [Observium] ping only device monitoring You just override the default arguments on the probe, the documentation should explain that. Host is *almost* always -H Adam. From: Tony Guadagno <tonyg(a)guadagno.org <mailto:tonyg@guadagno.org> > Sent: 13 April 2022 15:48 To: Observium <observium(a)observium.org <mailto:observium@observium.org> > Cc: adama(a)observium.org <mailto:adama@observium.org> Subject: RE: [Observium] ping only device monitoring Adam, I have been looking at probes, but the thing I don’t understand is how to add a probe when the device is not listed in Observium. I tried to overwrite the pulldown, but it does not allow that. Is there a way to add a device to the list? From: observium <observium-bounces(a)observium.org <mailto:observium-bounces@observium.org> > On Behalf Of adama--- via observium Sent: Wednesday, April 13, 2022 10:44 AM To: 'Observium' <observium(a)observium.org <mailto:observium@observium.org> > Cc: adama(a)observium.org <mailto:adama@observium.org> Subject: Re: [Observium] ping only device monitoring This is mentioned in the probes documentation. Just create ICMP probes on the Observium-server entry (or the closest partitioned poller) We might do something specific at some point, but it’ll basically just be the same thing but with the probes separated into a different list. Adam. From: observium <observium-bounces(a)observium.org <mailto:observium-bounces@observium.org> > On Behalf Of Tony Guadagno via observium Sent: 13 April 2022 15:41 To: Observium <observium(a)observium.org <mailto:observium@observium.org> > Cc: Tony Guadagno <tonyg(a)guadagno.org <mailto:tonyg@guadagno.org> > Subject: [Observium] ping only device monitoring Hi, I know this has been asked and answered before, but I cannot find anywhere to search old threads, so I need to ask again…. How do I configure Observium to monitor a device with ping but no SNMP ability? Thanks Tony

4 3

wmi issues, need a syntax change
by Tony Guadagno 13 Apr '22

13 Apr '22

Hi, I am guessing that wmi polling is not used very much but I do use it and find it handy. If you do use it, you are probably aware that your event logs are filling up with this error: The server-side authentication level policy does not allow the user domain\wmiuser SID (S-1-5-21-99999-3660327915-2769000259-31856) from address 1.1.1.1 to activate DCOM server. Please raise the activation authentication level at least to RPC_C_AUTHN_LEVEL_PKT_INTEGRITY in client application. I am getting 4 eventlog errors every polling interval (5 minutes) on every windows server. This is due to Microsoft enhancing security on wmi. (KB5004442-Manage changes for Windows DCOM Server Security Feature Bypass (CVE-2021-26414) (microsoft.com)<https://support.microsoft.com/en-us/topic/kb5004442-manage-changes-for-wind…>) There is a solution to this, you need to call wmi with pkt integrity enabled (wmic RPC_C_AUTHN_LEVEL_PKT_INTEGRITY support · Issue #41 · greenbone/openvas-smb (github.com)<https://github.com/greenbone/openvas-smb/issues/41>). So, for example wmic --user=domain.local\\user --password= //server.domain.local "select * from Win32_ComputerSystem" - throws the error in the target servers event log...also, this will start failing next year. However wmic --user=domain.local\\user --password= //ncacn_ip_tcp:server.domain.local[sign] "select * from Win32_ComputerSystem" will not throw the error wrapping the target server in ncacn_ip_tcp: and [sign] fixes the issue. So, would it be possible for you to enhance Observium to make the wmi calls this way? Thanks Tony

5 8

ping only device monitoring
by Tony Guadagno 13 Apr '22

13 Apr '22

Hi, I know this has been asked and answered before, but I cannot find anywhere to search old threads, so I need to ask again.... How do I configure Observium to monitor a device with ping but no SNMP ability? Thanks Tony

2 2

Date Preset
by Stuart Dyer 13 Apr '22

13 Apr '22

Hi Everyone, Does anyone know how to change the default date present [cid:image001.png@01D84E76.FA5F0BB0] When viewing a graph I would like the default graph to be the last Calendar month e.g if it is march show April 1 to 30 Regards, Stuart Dyer IT Administrator Phone: +61 2 8020 2063 | E-mail: stuart.dyer(a)innovit.com<mailto:stuart.dyer@innovit.com> [innovit-logo (002) trans 2018] Bringing quality to Master Data MLC Centre, Level 56 19-29 Martin Place <https://goo.gl/maps/2yiiJ2YC4H9SBjYX6> Sydney NSW 2000<https://goo.gl/maps/2yiiJ2YC4H9SBjYX6> Tel: +612 8020 2000 Fax: +612 8020 2099 Web: www.innovit.com<http://www.innovit.com/> Australasia | North America | Europe Follow us on LinkedIn<https://www.linkedin.com/company/innovit-australia-pty-ltd?trk=public_profi…> This electronic mail is solely for the use of the addressee and may contain information, which is confidential or privileged. If you receive this electronic mail in error, please delete it from your system immediately and notify the sender by electronic mail or using any of the following contact details.

3 3

FW: Total Core Traffic
by Peter Derissen 12 Apr '22

12 Apr '22

Hello, We have a lot of core links in our network. The total graphs are show on top. [cid:image001.png@01D84A72.89424B20] When I click on 1 of the graphs I get an error. [cid:image002.png@01D84A72.89424B20] When I check the URL I see that its very long. Could that be the problem and is there a way I can fix that? https://10.230.11.81/graphs/type=multi-port_bits_separate/to=1649323537/id=… Met vriendelijke groet, Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [cid:image003.png@01D84A72.89424B20]<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.eurof…> Volg ons op Twitter<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Ftwitter.c…> | Linkedin<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.linke…> | Facebook<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.faceb…> | Youtube<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.youtu…> Wilt u op de hoogte blijven van technische ontwikkelingen aan ons netwerk, nieuwe ICT ontwikkelingen en klantervaringen? Meld u dan aan voor onze maandelijkse nieuwsbrief<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmarketing…>. [cid:image004.jpg@01D84A72.89424B20]<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.eurof…> ******** IMPORTANT NOTICE ******** This e-mail (including any attachments) may contain information that is confidential or otherwise protected from disclosure and it is intended only for the addressees. If you are not the intended recipient, please note that any copying, distribution or other use of information contained in this e-mail (and its attachments) is not allowed. If you have received this e-mail in error, kindly notify us immediately by telephone or e-mail and delete the message (including any attachments) from your system. Please note that e-mail messages may contain computer viruses or other defects, may not be accurately replicated on other systems, or may be subject of unauthorized interception or other interference without the knowledge of sender or recipient. Eurofiber only sends and receives e-mails on the basis that Eurofiber is not responsible for any such computer viruses, corruption or other interference or any consequences thereof. Eurofiber Nederland B.V. is registered in the Chamber of Commerce of Amsterdam with number 34134377, VAT number NL 8088.51.524 B01. Eurofiber N.V. has its registered office at Belgicastraat 5 bus 7, 1930 Zaventem and is registered under national number 0435.204.851. Eurofiber France has its registered office at 21 Avenue de la Cr?ativit?, 59650 Villeneuve d'Ascq and is registered under national number FR 83.822.249.074.

6 16

Monitoris MSSQL database size
by Rando Sui 12 Apr '22

12 Apr '22

Hello, How do you monitor MSSQL specific measures, I would like to monitor Database size, how do you do that? Could I add database size to my Apps SQL server charts list? [cid:image002.png@01D84E8D.80A79050] Is there any indirect method, I gather7inject data to observium mysql and just display data from database and issue alerts? Greetings, Rando.

1 0

Ubuntu LDAP
by Valerie Lim 11 Apr '22

11 Apr '22

Hi, We would like to check does installing Observium affect any LDAP Ubuntu settings as we are unable to access LDAP server after Observium is being installed. Appreciate share with us, to configure setting config.php file in Observium systems. Regards Valerie

1 0

Re: [Observium] need some help with an alert checker
by Tony Guadagno 07 Apr '22

07 Apr '22

Adam, thanks, I will give this a shot Tony From: Adam Armstrong via observium Sent: Thursday, April 7, 2022 4:04 PM To: 'Observium' Cc: Adam Armstrong Subject: Re: [Observium] need some help with an alert checker Hi Tony, https://docs.observium.org/entities/#status You want something like association status_descr equals Source of Output Power test conditions status_name notequals normal adam. From: observium <observium-bounces(a)observium.org> On Behalf Of Tony Guadagno via observium Sent: 07 April 2022 20:34 To: Adam Armstrong via observium <observium(a)observium.org> Cc: Tony Guadagno <tonyg(a)guadagno.org> Subject: [Observium] need some help with an alert checker Hi, I have been able to write some basic checks but I need a little help with this. I want to write a check to alert when my ups’ switch to battery. I think I can do that by checking if the “source of output power” is not normal, but I do not know how to translate that logic into conditions and associations..can someone help? Thanks BTW, is there an exchange where people post their checks for others to use? Tony

1 0

need some help with an alert checker
by Tony Guadagno 07 Apr '22

07 Apr '22

Hi, I have been able to write some basic checks but I need a little help with this. I want to write a check to alert when my ups’ switch to battery. I think I can do that by checking if the “source of output power” is not normal, but I do not know how to translate that logic into conditions and associations..can someone help? Thanks BTW, is there an exchange where people post their checks for others to use? Tony

2 1

Observium - how to encrypt data at rest with AES 256
by Ryan Tee 05 Apr '22

05 Apr '22

Hi. Would like to inquire followings : How to encrypt data at rest with AES256 in Observium systems ? We plan to use 256-bit AES encryption ensures data is secure at rest. Could share with us information if any. Thank you. Regards Ryan

3 4

Observium - database Security Server and TCP database port uses TLS v1.2 or above for communications
by Ryan Tee 05 Apr '22

05 Apr '22

Hi , We would like to check followings in Observium systems. How to make sure that, in Observium systems, database Security Server and TCP database port uses TLS v1.2 or above for communications. This is to ensure communication is secured. Appreciate share with us, to configure setting config.php file in Observium systems. Regards Ryan [cid:image001.png@01D84810.72D22180]

3 4

questions about email alert notification formats
by Tony Guadagno 01 Apr '22

01 Apr '22

Hi, I have 2 questions about this. First, is it possible to attach a notification format per contact. We are sending out text alert notifications using number(a)vtext.com<mailto:number@vtext.com> and I think the format is too big for vtext.com to accept. Is it possible that on a contact, scale down the notification? Second, is it possible to change the format of the general "recover" email? thanks Tony

5 9

unix-agent for Proxmox
by walter＠onda.ch 01 Apr '22

01 Apr '22

Hello Adam Is it possible to collect also LXC with this script? Or maybe in the future? The command for do this ist: pvesh get /nodes/$(hostname)/lxc --output-format=json-pretty Regards Walter

3 3

Re: [Observium] Observium LDAP integration
by Nirmolak Singh Bajaj 31 Mar '22

31 Mar '22

Hi, I am having an integration problem with my LDAP server. This is my config for the LDAP. It is based on what the Observium website shows. Could you let me know where I am going wrong? Looking forward to your support. $config['auth_ldap_binddn'] = "CN=Administrator,CN=Users,DC=lab,DC=local"; $config['auth_ldap_bindpw'] = " "; $config['auth_ldap_attr']['uid'] = "sAMAccountName"; $config['auth_ldap_attr']['uidNumber'] = "objectSid"; $config['auth_ldap_attr']['cn'] = "name"; $config['auth_ldap_attr']['dn'] = "distinguishedname"; $config['auth_ldap_objectclass'] = "user"; $config['auth_ldap_version'] = 3; $config['auth_ldap_server'] = "lab.local"; $config['auth_ldap_port'] = 389; $config['auth_ldap_starttls'] = FALSE; $config['auth_ldap_prefix'] = "CN="; $config['auth_ldap_suffix'] = ",OU=mvc,DC=lab,DC=local"; $config['auth_ldap_group'] = array("DC=lab,DC=local"); $config['auth_ldap_groupbase'] = "DC=lab,DC=local"; $config['auth_ldap_bindanonymous'] = FALSE; $config['auth_ldap_groupmembertype'] = "nodn"; $config['auth_ldap_groups']['mvc']['level'] = 10; [cid:image001.png@01D84552.881C71F0] [cid:image002.png@01D84552.881C71F0] Warmest Regards, Nirmolak Singh

2 1

What to do when all optimizations fails ...
by Graf Vincent 31 Mar '22

31 Mar '22

Hello, Although I double check every tuning guide from the website, I'm in trouble with my Observium installation. First of all, the size of the network is huge... From the Statistics on about page : - 1023 Devices - 57K Ports - 51K Sensors - 128 GB RRD - 20GB DB I run the latest version of Observium with PHP 7.3 on a Debian 10 physical server. It is a dual Intel Xeon 6248 2.5Ghz (20C/40T) equipped with 3 RAID groups : - RAID1 for the OS - RAID1 for the RRD files and Observium application - RAID5 for the database All the disks are SSD. The number of poller is set to 48 and the whole polling time has an average of 264s and a max of @334s (I just increase the poller to 60 today...). I do housekeeping every week to cut off the event log and other stuff older than 30 days. I also use fast userspace caching with php-apcu For the port discovery, some of ports are ignored like vlans, control plan, stack interface, voice-port, etc... The installation runs like a big diesel machine ... not so fast but very robust. My problem is that it takes more than 30 seconds to get the detail of simple 48 ports switch ... and much more when I try to load a detailed backbone with many more ports. Do you have any suggestion to improve the GUI responsiveness ? Thank you for your time Kind regards Vincent

2 4

Re: [Observium] Observium product evolution
by Adam Armstrong 30 Mar '22

30 Mar '22

Hi Nilesh, We don't really do the sales process thing, we don't have any sales staff at all, only developers. You can see most of the platform using the CE version. Thanks, Adam. From: observium <mailman-bounces(a)postman.memetic.org> On Behalf Of nilesh.patil(a)wwindia.com Sent: 30 March 2022 12:51 To: observium(a)observium.org; observium-owner(a)observium.org Cc: 'Gagan Gupta' <gagankumar.gupta(a)wwindia.com>; 'Mayur Pawar' <mayur.pawar(a)wwindia.com>; 'Rahul Galande' <rahul.galande(a)wwindia.com> Subject: RE: Observium product evolution ++++observium-owner(a)observium.org <mailto:++++observium-owner@observium.org> Regards, Nilesh Patil From: nilesh.patil(a)wwindia.com <mailto:nilesh.patil@wwindia.com> <nilesh.patil(a)wwindia.com <mailto:nilesh.patil@wwindia.com> > Sent: 30 March 2022 16:45 To: observium(a)observium.org <mailto:observium@observium.org> Cc: Gagan Gupta <gagankumar.gupta(a)wwindia.com <mailto:gagankumar.gupta@wwindia.com> >; Mayur Pawar <mayur.pawar(a)wwindia.com <mailto:mayur.pawar@wwindia.com> >; Rahul Galande <rahul.galande(a)wwindia.com <mailto:rahul.galande@wwindia.com> > Subject: Observium product evolution Dear Observium, This Nilesh Patil from Web Werks India Pvt. Ltd. We have been looking for this product for our network infra monitoring and for the billing purpose. For this product can we have the POC for enterprise level. It will also be appreciated if we can have call for initial engagement. Waiting for your prompt response and availability for the call. Thanks & Regards, Nilesh Patil. Manager, Network Web Werks India Pvt. Ltd. Contact : 86565 48433 Data Center Services | Hosted IT Infrastructure | Cloud Services Managed Services | Infrastructure Application | Network Services

1 1

Add peer-name to BGP notifications
by Steffen Klemer 29 Mar '22

29 Mar '22

Hey there, for some reasons not everyone of us is fluent with IPs and AS numbers so I'd like to propose to add some kind of descriptive info to the routing alerts. For us sth. like: /var/www/observium/includes/entities.inc.php:1789 $entity['entity_name'] = "AS".$entity['bgpPeerRemoteAs'] ." ". $addr ." ". $entity['reverse_dns']; would be a good enough/great solution. Merry Christmas for everyone celebrating it and/or some calm days from Göttingen, Germany. Steffen -- Steffen Klemer Arbeitsgruppe "Netze" Tel.: +49 551 39 30204, E-Mail: steffen.klemer(a)gwdg.de ------------------------------------------------------------------------- Gesellschaft für wissenschaftliche Datenverarbeitung mbH Göttingen (GWDG) Burckhardtweg 4, 37077 Göttingen, URL: https://gwdg.de Support: Tel.: +49 551 39-30 000, URL: https://gwdg.de/support Sekretariat: Tel.: +49 551 39-30 001, E-Mail: gwdg(a)gwdg.de Geschäftsführer: Prof. Dr. Ramin Yahyapour Aufsichtsratsvorsitzender: Prof. Dr. Norbert Lossau Sitz der Gesellschaft: Göttingen Registergericht: Göttingen, Handelsregister-Nr. B 598 Zertifiziert nach ISO 9001 -------------------------------------------------------------------------

3 5

Trying to not alert on an interface in monitoring mode
by Lars Joergensen 28 Mar '22

28 Mar '22

Hey all I'm trying to build an alert that will go off in an interface is operationally down but not disabled. A fringe case is a span port where the operational state is "monitoring". It still triggers on these conditions (both are required to be true): [cid:image001.png@01D8405C.2132B5D0] (It says "suppressed" because the previous definition of the alarm was "IfOperStatus notequals up" and we suppressed it at that time) Can anybody help me see through what's wrong in my definition? Best regards Lars ________________________________ Disclaimer: This e-mail, including any attachments, is for the intended recipient only. If you have received this e-mail by mistake please notify the sender immediately by return e-mail and delete this e-mail and any attachments, without opening the attachments, from your system. Access, disclosure, copying, distribution or reliance on any part of this e-mail by anyone else is prohibited. This e-mail is confidential and may be legally privileged. Chr. Hansen does not represent and/or warrant that the information sent and/or received by or with this e-mail is correct and does not accept any liability for damages related thereto. https://www.chr-hansen.com/en/legal-notice

2 5

vlan table cleanup?
by Adam Thompson 25 Mar '22

25 Mar '22

We’re noticing that the VLANs page (Ports-->VLANs) is less useful than it could be, because it seems to keep around every VLAN that has ever existed on every device that has ever existed. I also don’t see anything in …/includes/housekeeping/* that would address this. It’s so bad/useless at this point that 1701 records are from devices that don’t even exist anymore (vs. 4409 where the parent device at least still exists, even if the VLAN doesn’t). A similar problem exists in vlans_fdb. Is there some housekeeping mechanism that is supposed to take care of this, that I can go troubleshoot? Or is it just an oversight/omission? And if not, can I just do a “DELETE FROM vlans WHERE NOT EXISTS ( <query on ‘device’> )” (and something similar on vlans_fdb) to clean it up? Thanks, -Adam Adam Thompson Consultant, Infrastructure Services [MERLIN] 100 - 135 Innovation Drive Winnipeg, MB, R3T 6A8 (204) 977-6824 or 1-800-430-6404 (MB only) athompson(a)merlin.mb.ca<mailto:athompson@merlin.mb.ca> www.merlin.mb.ca<http://www.merlin.mb.ca/>

1 0

New Buffalo terastations do now discover as Storage, they show up as linux servers
by Tony Guadagno 24 Mar '22

24 Mar '22

Hi, I opened this Jira, can you take a look? Thanks [OBS-4064] New Buffalo Terastation classified as linux server, not storage like older models - Observium<https://jira.observium.org/browse/OBS-4064> Tony

1 0

IPMI discrete unit sensors
by Karl-André Skevik 22 Mar '22

22 Mar '22

Hello, We have several machines with IPMI configured in observium. Some of these machines have had hardware failures, such as power supply or disk failures, and we can see the failure status when polling the machines via ipmitool, but there are no warnings reported by observium. The unit of these sensor values is "discrete". Does observium support this type of sensor, and if so, is it possible to configure observium to warn about failures in these sensors? Regards,

2 2

Rancid + Observium Integration
by Njoroge, Joyce (Stadt Ulm) 21 Mar '22

21 Mar '22

Hallo, I have Rancid integrated into Observium but as it is, not all the devices have the config tab. Additionally, those with the config tab do not update the configs as set. I'd appreciate your help. I followed the documentation below: RANCID Integration - Observium<https://docs.observium.org/rancid/> Regards, Joyce

2 1

restarting snmp service on windows server flags the server as down in observium
by Tony Guadagno 21 Mar '22

21 Mar '22

Hi, I have an alert that says if the device_uptime is less than 360, alert that the server was down. I happened to restart the snmp service on several of my servers and was surprised to find the alert triggered. I am guessing that when snmp restarts, the uptime counter goes to zero? Is there any way to get a true read of the uptime? I am trying to alert if the server rebooted within the poling window. thanks Tony

2 3

Alert for summarized sensors value
by Laszlo Nemeth 21 Mar '22

21 Mar '22

Hello, i have a lot alert checks witch can alert for a sensors, and these are working great. But now i would like to create an alert like this: I would like to receive an alert if the PDU hostname match PDU-*-1, and BANK1 + BANK2 + BANK 3 value greather than 10. So if the summarized BANKs value is greather than 10. So my question is Observium support this alert type where the multiple sensor's summarized value is the condition? Thanks Br Laszlo

2 1

Full support for FS Switch's.
by Kevin Riahi 18 Mar '22

18 Mar '22

Hey Adam, I like to Request full SNMP support for FS.com switches. Currently a lot of info in left out. Such as Temps, Fans, Power Supply status Etc. Specifically S5860-20SQ. https://www.fs.com/products/108710.html MIB Files: [ https://img-en.fs.com/file/user_manual/s5860-series-swithes-snmp-mib-files.… | https://img-en.fs.com/file/user_manual/s5860-series-swithes-snmp-mib-files.… ] Additional info that may be helpful: https://img-en.fs.com/file/user_manual/s5860-series-switches-snmp-template-… Thank you Kevin Riahi kevin.riahi(a)envoi.com https://www.envoi.com

2 2

Question BGP peers in VRF
by Sandoiu Mihai 18 Mar '22

18 Mar '22

Hi I am evaluating Observium for reading the number of received bgp routes on ASR9000 routers. I have successfully discovered one of our testrouters and I can see the bgp peers in the liste. However it only detects the vpnv4/vpnv6 bgp peers. It does not detect the bgp peers inside vrfs. Is there any possibility to do so? Apparently they should be read in CISCO-BGP4-MIB Regards Mihai

2 1

Huawei CPU Graph is not showing
by Farshid Abediny 17 Mar '22

17 Mar '22

Hello, I have a huawei 6851-48S6Q and i added this to my observium, but i could not see the CPU Graph, Can somebody help me to solve this problem? Thank you. Regards

1 0

Migration to new server
by Thodoris Lakiotis 16 Mar '22

16 Mar '22

Hi I try today to migrate my installation to newer OS - Ubuntu 20 RRDs transferred ok DB transferred ok, devices all OK But the weirdest thing is that I couldn’t login with any of my logins when I was trying via URL I only was able to login by using the IP. Cross checked that the IP any URL is the same Any ideas ? -- __________________________________________ *Thodoris Lakiotis* P : *+30 210 8100112 <%2B30%20210%208100112>* M: *+30 695 8462642*E: tlak(a)synapsecom.gr www.synapsecom.gr *Synapsecom Telecoms S.A*14th VIO.PA <https://www.google.com/maps/place/SYNAPSECOM+TELECOMS+%CE%91.%CE%95./@38.07…>., No3 133 41 Athens Greece This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden. *P* please don't print this e-mail unless you really need to

2 3

Event log to remote syslog (or local)
by Pieter De Wit 16 Mar '22

16 Mar '22

Hi, My Google fu is failing today - Can Observium send it’s event log to a remote syslog ? Or even a local syslog Thanks !

1 0

Dashboard assigned to user
by Arnoldo Vidal Bravo 14 Mar '22

14 Mar '22

Hi, Is it possible? how? -- Saluda cordialmente

2 1

Alert reminder
by Toky ANDRIANASOLO 12 Mar '22

12 Mar '22

Hello, Is possible to disable the "Alert reminder" or change the setting to 01 week for example Thank you and Regards, Toky

2 1

VLANs UI question
by Adam Thompson 08 Mar '22

08 Mar '22

I’m using the top-level VLANs view to help identify VLANs we can remove, and it’s remarkably helpful, at least as a starting point. This view identifies that I have, for example, 2 untagged ports on VLAN 6… which is great, but how do I see *which ports* those are? I haven’t been able to find anything I can click on that reveals the port names/numbers, or even which device they’re on. Beyond that, how is it possible to have 2 untagged ports on 0 (zero) devices, in the first place? While we’re at it, in <hostname>/vlan/vlan_id=XYZ/ page, why are the labels “Devices”, “Tagged Ports”, “Untagged Ports” and “MACs” in the banner clickable if they don’t do anything? Help? I’m assuming I’m missing something here. -Adam Adam Thompson Consultant, Infrastructure Services [MERLIN] 100 - 135 Innovation Drive Winnipeg, MB, R3T 6A8 (204) 977-6824 or 1-800-430-6404 (MB only) athompson(a)merlin.mb.ca<mailto:athompson@merlin.mb.ca> www.merlin.mb.ca<http://www.merlin.mb.ca/>

1 0

Not finding an agent-script called 'os'
by Noah 07 Mar '22

07 Mar '22

Installing observium for the first time. :/opt/observium$ cat VERSION Observium CE 21.10.1 I am following the instructions to install the linux agent: https://docs.observium.org/unix_agent/ I am not finding an agent-script called 'os'. Where can I find the agent-script called 'os' ? # ls -1 /usr/lib/observium_agent/scripts-available apache areca-hw asterisk bind ceph crashplan dhcpkit dmi dovecot dpkg drbd edac exim-mailqueue-extended.pl exim-mailqueue.sh exim_stats_process.pl freeradius freeradius.conf.sample freeradius.sh hdarray hddtemp icecast icecast.conf.default ioping ioping.cnf ipmitool-sensor jvm-over-jmx kamailio ksm lighttpd lmsensors lvs_stats memcached mongodb munin munin-scripts mysql mysql.cnf nfs nfsd nginx nsd ntpd nvidia-smi openvpn postfix_mailgraph postfix_qshape postgresql.conf postgresql.pl powerdns powerdns-recursor proxmox-qemu raspberrypi README rpm sabnzbd-qstatus shoutcast shoutcast.conf shoutcast.default.conf temperature unbound varnish virt-what vmwaretools zimbra zyxel-nas326

1 0

User device permissions cleared after upgrade?
by Stempien, Dave 02 Mar '22

02 Mar '22

I can’t say for certain but I recently upgraded from 21.12.11831 (stable) -> 22.2.11898 (stable) and all of our user accounts that had specific device permissions seem to have lost those entries. Is there anything in the upgrade that may have overwritten or otherwise caused those permissions to disappear?

2 1

Any changes to Mikrotik's MIB ?
by Pieter De Wit 27 Feb '22

27 Feb '22

Hi Guys, About 8 hours ago an auto update was applied to a Observium box and following this the CPU graph is gone: This is the only change that I can think of so can someone please confirm this ? A rediscover of the host does “run” the Mikrotik MIB against it but it still fails to find the CPU oids Thanks !

2 4

Change base_url listening port
by Gordon Cheng (gocheng) 24 Feb '22

24 Feb '22

Hi Observium team: We are trying to follow the “Config Option” under: https://docs.observium.org/config_options/ to change the Observium GUI port from default 80 to 8000, by updating “config.php” to: // Change web interface port setting $config['base_url'] = "http://".$_SERVER["observium.abc.com"].":".$_SERVER["8000"]; But it doesn’t work even after reloading apache2. Any suggestion how to make it right? Thanks. - Gordon

3 2

Auto-authenticate for display graph in Weathermap
by Sébastien 65 20 Feb '22

20 Feb '22

Hello, I use PHP WeatherMAP and use graph display via "/graph.php?height=100&width=512&id=1053&type=port_bits&legend=no" The problem is that I have to be authenticated on Observium to display the content of the graph... How to auto-authenticate ? Thanks for your help.

2 1

Re: [Observium] cli to rebuilt alert checkers
by Tony Guadagno 19 Feb '22

19 Feb '22

Ok, clicking the “rebuild” button on the alert checker interface is not really necessary? It will rebuild every 5 min? Tony From: Adam Armstrong via observium<mailto:observium@observium.org> Sent: Saturday, February 19, 2022 11:38 AM To: Observium<mailto:observium@observium.org> Cc: Adam Armstrong<mailto:adama@observium.org> Subject: Re: [Observium] cli to rebuilt alert checkers It’s done automatically at the end of poller/discovery. Adam. Sent from my iPhone On 19 Feb 2022, at 16:32, Tony Guadagno via observium <observium(a)observium.org> wrote: Hi is there a command to rebuild the alert checkers or can it only be done in the gui? thanks Tony _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

cli to rebuilt alert checkers
by Tony Guadagno 19 Feb '22

19 Feb '22

Hi is there a command to rebuild the alert checkers or can it only be done in the gui? thanks Tony

2 1

monitor by ICMP
by Toky ANDRIANASOLO 18 Feb '22

18 Feb '22

Hello, Is it possible to monitor devices by ICMP, we want to have IP availability of a devices that have no snmp activated Thank you and Regards, Toky

3 4

Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert
by Tony Guadagno 17 Feb '22

17 Feb '22

Adam, I finally got this working. I have written up a quick guide to making this work, would it be possible for you to put this in your documentation page for LDAP Authentication? I am sure I will loose it if it is not somewhere obvious Directions for enabling LDAP with TLS when connecting to an LDAP server with a self signed certificate or a CA that the Observium server does not recognize Assumptions: you have already enabled SSL/TLS for ldap on your Microsoft Domain Controller (or other LDAP server) Observium is installed on a Fedora flavor of Linux version 7 or 8 (this might work with Ubuntu but i am not sure the commands are the same) Observium is configured for LDAP AND TLS per the authentication documentation page On the Observium server: yum install php-ldap vim /etc/openldap/ldap.conf make sure these 2 config options are commented out #TLS_CACERTDIR /etc/openldap/certs #TLS_CACERT /etc/openldap/certs/cert.crt Add/Change this config option to either hard or allow TLS_REQCERT hard “hard” means that the LDAP server MUST present a cert and the cert must be trustworthy OR in the trusted cert store (this is the more secure method) “allow” mean that the LDAP server MUST present a cert and the cert can be anything...valid or invalid setting to “hard” is better because it prevents an imposter from stealing the ip address of the LDAP server and intercepting the messages from Observium If you are setting TLS_REQCERT to “hard” then take these additional steps: export the LDAP server cert in b64 format with NO KEY place cert of LDAP server in ‘/etc/pki/ca-trust/source/anchors’ folder run ‘update-ca-trust’ as root Tony From: Adam Armstrong via observium<mailto:observium@observium.org> Sent: Wednesday, February 16, 2022 7:29 PM To: 'Observium'<mailto:observium@observium.org> Cc: Adam Armstrong<mailto:adama@observium.org> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert I’ve never used LDAP, so I’m not really sure how this should be done. You can put the putenv stuff in config.php. So long as the variable is set before LDAP tries to start the connection that should be sufficient. Observium doesn’t have any configuration related to this itself. You just need to coax whatever conglomeration of PHP and OpenLDAP code exists into talking to your LDAP server. You might be able to turn of the cert checking by putting “TLS_REQCERT never” into ldap.conf, probably /etc/openldap/ldap.conf or somewhere similar. Adam. From: Tony Guadagno <tonyg(a)guadagno.org> Sent: 16 February 2022 23:55 To: Observium <observium(a)observium.org> Cc: Adam Armstrong <adama(a)observium.org> Subject: RE: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Adam, I have the cert for my AD server, as I said, I am pretty familiar with this process as I use ldap often for application authentication….what I am not very familiar with is php. Other apps have config options to set the paths for the certs etc. What I need help with is where (specifically) to put the config so that Observium will use it. I have the certs, I just need the syntax You mentioned putenv…where would I put that? It must be somewhere in Observium? Thanks for your help Tony From: Adam Armstrong via observium<mailto:observium@observium.org> Sent: Wednesday, February 16, 2022 6:42 PM To: 'Observium'<mailto:observium@observium.org> Cc: Adam Armstrong<mailto:adama@observium.org> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Whoops: putenv(‘LDAPTLS_CACERT=/path/to/rootca.pem’); Note that this seems to want the CA’s cert, not your server’s cert. Our code doesn’t have any consideration for TLS at all as far as I can see, it should all be transparent to Observium if you get PHP/LDAP into the situation where it accepts your cert. Adam. From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> On Behalf Of Adam Armstrong via observium Sent: 16 February 2022 23:36 To: 'Observium' <observium(a)observium.org<mailto:observium@observium.org>> Cc: Adam Armstrong <adama(a)observium.org<mailto:adama@observium.org>> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Presumably you need to extract your certs in the correct format and direct the commands to them. The LDAP connection is done by PHP’s LDAP module. You just need to work out how to do it with PHP’s module. It’s probably that you could override this globally with the php.ini rather than putting it in the config.php, too. There seems to be half a dozen solutions for making this work, which isn’t uncommon with infrequently used PHP features. There’s also this: putenv('/path/to/rootca.pem'); Adam. From: Tony Guadagno <tonyg(a)guadagno.org<mailto:tonyg@guadagno.org>> Sent: 16 February 2022 21:57 To: Observium <observium(a)observium.org<mailto:observium@observium.org>> Cc: Adam Armstrong <adama(a)observium.org<mailto:adama@observium.org>> Subject: RE: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Adam, sorry for being dense, but do I just add these two lines directly (as is) to the config.php? ldap_set_option(null, LDAP_OPT_X_TLS_CACERTDIR, '/path/to'); ldap_set_option(null, LDAP_OPT_X_TLS_CACERTFILE, '/path/to/cert.pem'); I tried this with the paths to my certs and it had no affect. Do I need to wrap those command in some other syntax? thanks Tony From: Adam Armstrong via observium<mailto:observium@observium.org> Sent: Wednesday, February 16, 2022 4:25 PM To: 'Observium'<mailto:observium@observium.org> Cc: Adam Armstrong<mailto:adama@observium.org> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert https://andreas.heigl.org/2020/01/31/handle-self-signed-certificates-with-p… I’d assume that getting your cert and putting the two ldap_set_option() commands into config.php should suffice. This seems like a better solution that turning off cert verification. Adam. From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> On Behalf Of Tony Guadagno via observium Sent: 16 February 2022 21:03 To: Observium <observium(a)observium.org<mailto:observium@observium.org>>; Brandon Lund <brandon(a)kansas.net<mailto:brandon@kansas.net>> Cc: Tony Guadagno <tonyg(a)guadagno.org<mailto:tonyg@guadagno.org>> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert I made a packet capture on the Observium server trying to login and if you look, you will see that it is indeed a self signed issue. How do I tell Observium to either trust the cert OR ignore the fact that it is self signed?? [cid:image002.png@01D8240F.9412F790] Tony From: Tony Guadagno via observium<mailto:observium@observium.org> Sent: Wednesday, February 16, 2022 3:27 PM To: Brandon Lund<mailto:brandon@kansas.net>; Observium<mailto:observium@observium.org> Cc: Tony Guadagno<mailto:tonyg@guadagno.org> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Sorry, I should have been more specific…I already have other apps using ldap with tls hitting the server and they work…so I am confident my AD server is properly configured. I work a lot with ldap and I often find that some apps that integrate with ldap and tls get picky about the cert..thats why I think it might be the fact that I am using a self signed cert (which is common on AD servers). Usually, there is a way to tell the application “ignore the fact that it is self signed, accept it anyway” Tony From: Brandon Lund<mailto:brandon@kansas.net> Sent: Wednesday, February 16, 2022 3:08 PM To: Observium<mailto:observium@observium.org> Cc: Tony Guadagno<mailto:tonyg@guadagno.org> Subject: Re: LDAP auth to MS AD with TLS Self Signed Cert looks like you need to enable tls for ad to start listing for ldaps no experience just a quick search. https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl… [Image removed by sender.]<https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl…> Enable Lightweight Directory Access Protocol (LDAP) over Secure Sockets Layer (SSL) - Windows Server | Microsoft Docs<https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl…> docs.microsoft.com Describes how to enable LDAP over SSL with a third-party certification authority. Thanks Brandon Lund KansasNet Internet Services 785-776-1452 From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> on behalf of Tony Guadagno via observium <observium(a)observium.org<mailto:observium@observium.org>> Sent: Wednesday, February 16, 2022 1:49 PM To: Tony Guadagno via observium Cc: Tony Guadagno Subject: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Hi, I have ldap auth working mostly, if I set tls to false, I can authenticate. However, I want to be secure and when I enable tls, I get a debug error that says: Error binding to LDAP server: servername.local: Can’t contact LDAP server I am guessing the issue is the self signed cert that my server is using. My question is…how do I configure Observium to accept self signed certs for ldap? thanks Tony

2 2

DB error after Ubuntu/MySQL forced update
by Jason Vanlandingham 17 Feb '22

17 Feb '22

I'm getting the following error when trying to connect to my Observium page: DB not connected, please check database connection configuration. DB Error 2002: No such file or directory I found this post about it, but the fixes suggested here don't seem to work for me. https://www.turnkeylinux.org/forum/support/thu-20181129-0834/db-error-2002-… Has anyone else hit this problem and managed to fix it?

2 1

Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert
by Tony Guadagno 17 Feb '22

17 Feb '22

Adam, I have the cert for my AD server, as I said, I am pretty familiar with this process as I use ldap often for application authentication….what I am not very familiar with is php. Other apps have config options to set the paths for the certs etc. What I need help with is where (specifically) to put the config so that Observium will use it. I have the certs, I just need the syntax You mentioned putenv…where would I put that? It must be somewhere in Observium? Thanks for your help Tony From: Adam Armstrong via observium<mailto:observium@observium.org> Sent: Wednesday, February 16, 2022 6:42 PM To: 'Observium'<mailto:observium@observium.org> Cc: Adam Armstrong<mailto:adama@observium.org> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Whoops: putenv(‘LDAPTLS_CACERT=/path/to/rootca.pem’); Note that this seems to want the CA’s cert, not your server’s cert. Our code doesn’t have any consideration for TLS at all as far as I can see, it should all be transparent to Observium if you get PHP/LDAP into the situation where it accepts your cert. Adam. From: observium <observium-bounces(a)observium.org> On Behalf Of Adam Armstrong via observium Sent: 16 February 2022 23:36 To: 'Observium' <observium(a)observium.org> Cc: Adam Armstrong <adama(a)observium.org> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Presumably you need to extract your certs in the correct format and direct the commands to them. The LDAP connection is done by PHP’s LDAP module. You just need to work out how to do it with PHP’s module. It’s probably that you could override this globally with the php.ini rather than putting it in the config.php, too. There seems to be half a dozen solutions for making this work, which isn’t uncommon with infrequently used PHP features. There’s also this: putenv('/path/to/rootca.pem'); Adam. From: Tony Guadagno <tonyg(a)guadagno.org<mailto:tonyg@guadagno.org>> Sent: 16 February 2022 21:57 To: Observium <observium(a)observium.org<mailto:observium@observium.org>> Cc: Adam Armstrong <adama(a)observium.org<mailto:adama@observium.org>> Subject: RE: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Adam, sorry for being dense, but do I just add these two lines directly (as is) to the config.php? ldap_set_option(null, LDAP_OPT_X_TLS_CACERTDIR, '/path/to'); ldap_set_option(null, LDAP_OPT_X_TLS_CACERTFILE, '/path/to/cert.pem'); I tried this with the paths to my certs and it had no affect. Do I need to wrap those command in some other syntax? thanks Tony From: Adam Armstrong via observium<mailto:observium@observium.org> Sent: Wednesday, February 16, 2022 4:25 PM To: 'Observium'<mailto:observium@observium.org> Cc: Adam Armstrong<mailto:adama@observium.org> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert https://andreas.heigl.org/2020/01/31/handle-self-signed-certificates-with-p… I’d assume that getting your cert and putting the two ldap_set_option() commands into config.php should suffice. This seems like a better solution that turning off cert verification. Adam. From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> On Behalf Of Tony Guadagno via observium Sent: 16 February 2022 21:03 To: Observium <observium(a)observium.org<mailto:observium@observium.org>>; Brandon Lund <brandon(a)kansas.net<mailto:brandon@kansas.net>> Cc: Tony Guadagno <tonyg(a)guadagno.org<mailto:tonyg@guadagno.org>> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert I made a packet capture on the Observium server trying to login and if you look, you will see that it is indeed a self signed issue. How do I tell Observium to either trust the cert OR ignore the fact that it is self signed?? [cid:image002.png@01D82366.ADE67E70] Tony From: Tony Guadagno via observium<mailto:observium@observium.org> Sent: Wednesday, February 16, 2022 3:27 PM To: Brandon Lund<mailto:brandon@kansas.net>; Observium<mailto:observium@observium.org> Cc: Tony Guadagno<mailto:tonyg@guadagno.org> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Sorry, I should have been more specific…I already have other apps using ldap with tls hitting the server and they work…so I am confident my AD server is properly configured. I work a lot with ldap and I often find that some apps that integrate with ldap and tls get picky about the cert..thats why I think it might be the fact that I am using a self signed cert (which is common on AD servers). Usually, there is a way to tell the application “ignore the fact that it is self signed, accept it anyway” Tony From: Brandon Lund<mailto:brandon@kansas.net> Sent: Wednesday, February 16, 2022 3:08 PM To: Observium<mailto:observium@observium.org> Cc: Tony Guadagno<mailto:tonyg@guadagno.org> Subject: Re: LDAP auth to MS AD with TLS Self Signed Cert looks like you need to enable tls for ad to start listing for ldaps no experience just a quick search. https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl… [Image removed by sender.]<https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl…> Enable Lightweight Directory Access Protocol (LDAP) over Secure Sockets Layer (SSL) - Windows Server | Microsoft Docs<https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl…> docs.microsoft.com Describes how to enable LDAP over SSL with a third-party certification authority. Thanks Brandon Lund KansasNet Internet Services 785-776-1452 From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> on behalf of Tony Guadagno via observium <observium(a)observium.org<mailto:observium@observium.org>> Sent: Wednesday, February 16, 2022 1:49 PM To: Tony Guadagno via observium Cc: Tony Guadagno Subject: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Hi, I have ldap auth working mostly, if I set tls to false, I can authenticate. However, I want to be secure and when I enable tls, I get a debug error that says: Error binding to LDAP server: servername.local: Can’t contact LDAP server I am guessing the issue is the self signed cert that my server is using. My question is…how do I configure Observium to accept self signed certs for ldap? thanks Tony

2 2

Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert
by Tony Guadagno 17 Feb '22

17 Feb '22

Adam, sorry for being dense, but do I just add these two lines directly (as is) to the config.php? ldap_set_option(null, LDAP_OPT_X_TLS_CACERTDIR, '/path/to'); ldap_set_option(null, LDAP_OPT_X_TLS_CACERTFILE, '/path/to/cert.pem'); I tried this with the paths to my certs and it had no affect. Do I need to wrap those command in some other syntax? thanks Tony From: Adam Armstrong via observium<mailto:observium@observium.org> Sent: Wednesday, February 16, 2022 4:25 PM To: 'Observium'<mailto:observium@observium.org> Cc: Adam Armstrong<mailto:adama@observium.org> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert https://andreas.heigl.org/2020/01/31/handle-self-signed-certificates-with-p… I’d assume that getting your cert and putting the two ldap_set_option() commands into config.php should suffice. This seems like a better solution that turning off cert verification. Adam. From: observium <observium-bounces(a)observium.org> On Behalf Of Tony Guadagno via observium Sent: 16 February 2022 21:03 To: Observium <observium(a)observium.org>; Brandon Lund <brandon(a)kansas.net> Cc: Tony Guadagno <tonyg(a)guadagno.org> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert I made a packet capture on the Observium server trying to login and if you look, you will see that it is indeed a self signed issue. How do I tell Observium to either trust the cert OR ignore the fact that it is self signed?? [cid:image002.png@01D82356.3DB8A3E0] Tony From: Tony Guadagno via observium<mailto:observium@observium.org> Sent: Wednesday, February 16, 2022 3:27 PM To: Brandon Lund<mailto:brandon@kansas.net>; Observium<mailto:observium@observium.org> Cc: Tony Guadagno<mailto:tonyg@guadagno.org> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Sorry, I should have been more specific…I already have other apps using ldap with tls hitting the server and they work…so I am confident my AD server is properly configured. I work a lot with ldap and I often find that some apps that integrate with ldap and tls get picky about the cert..thats why I think it might be the fact that I am using a self signed cert (which is common on AD servers). Usually, there is a way to tell the application “ignore the fact that it is self signed, accept it anyway” Tony From: Brandon Lund<mailto:brandon@kansas.net> Sent: Wednesday, February 16, 2022 3:08 PM To: Observium<mailto:observium@observium.org> Cc: Tony Guadagno<mailto:tonyg@guadagno.org> Subject: Re: LDAP auth to MS AD with TLS Self Signed Cert looks like you need to enable tls for ad to start listing for ldaps no experience just a quick search. https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl… [Image removed by sender.]<https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl…> Enable Lightweight Directory Access Protocol (LDAP) over Secure Sockets Layer (SSL) - Windows Server | Microsoft Docs<https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl…> docs.microsoft.com Describes how to enable LDAP over SSL with a third-party certification authority. Thanks Brandon Lund KansasNet Internet Services 785-776-1452 From: observium <observium-bounces(a)observium.org> on behalf of Tony Guadagno via observium <observium(a)observium.org> Sent: Wednesday, February 16, 2022 1:49 PM To: Tony Guadagno via observium Cc: Tony Guadagno Subject: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Hi, I have ldap auth working mostly, if I set tls to false, I can authenticate. However, I want to be secure and when I enable tls, I get a debug error that says: Error binding to LDAP server: servername.local: Can’t contact LDAP server I am guessing the issue is the self signed cert that my server is using. My question is…how do I configure Observium to accept self signed certs for ldap? thanks Tony

3 3

Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert
by Tony Guadagno 16 Feb '22

16 Feb '22

I made a packet capture on the Observium server trying to login and if you look, you will see that it is indeed a self signed issue. How do I tell Observium to either trust the cert OR ignore the fact that it is self signed?? [cid:image003.png@01D8234E.A5CB3950] Tony From: Tony Guadagno via observium<mailto:observium@observium.org> Sent: Wednesday, February 16, 2022 3:27 PM To: Brandon Lund<mailto:brandon@kansas.net>; Observium<mailto:observium@observium.org> Cc: Tony Guadagno<mailto:tonyg@guadagno.org> Subject: Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Sorry, I should have been more specific…I already have other apps using ldap with tls hitting the server and they work…so I am confident my AD server is properly configured. I work a lot with ldap and I often find that some apps that integrate with ldap and tls get picky about the cert..thats why I think it might be the fact that I am using a self signed cert (which is common on AD servers). Usually, there is a way to tell the application “ignore the fact that it is self signed, accept it anyway” Tony From: Brandon Lund<mailto:brandon@kansas.net> Sent: Wednesday, February 16, 2022 3:08 PM To: Observium<mailto:observium@observium.org> Cc: Tony Guadagno<mailto:tonyg@guadagno.org> Subject: Re: LDAP auth to MS AD with TLS Self Signed Cert looks like you need to enable tls for ad to start listing for ldaps no experience just a quick search. https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl… [https://docs.microsoft.com/en-us/media/logos/logo-ms-social.png]<https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl…> Enable Lightweight Directory Access Protocol (LDAP) over Secure Sockets Layer (SSL) - Windows Server | Microsoft Docs<https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl…> docs.microsoft.com Describes how to enable LDAP over SSL with a third-party certification authority. Thanks Brandon Lund KansasNet Internet Services 785-776-1452 From: observium <observium-bounces(a)observium.org> on behalf of Tony Guadagno via observium <observium(a)observium.org> Sent: Wednesday, February 16, 2022 1:49 PM To: Tony Guadagno via observium Cc: Tony Guadagno Subject: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Hi, I have ldap auth working mostly, if I set tls to false, I can authenticate. However, I want to be secure and when I enable tls, I get a debug error that says: Error binding to LDAP server: servername.local: Can’t contact LDAP server I am guessing the issue is the self signed cert that my server is using. My question is…how do I configure Observium to accept self signed certs for ldap? thanks Tony

3 3

Re: [Observium] LDAP auth to MS AD with TLS Self Signed Cert
by Tony Guadagno 16 Feb '22

16 Feb '22

Sorry, I should have been more specific…I already have other apps using ldap with tls hitting the server and they work…so I am confident my AD server is properly configured. I work a lot with ldap and I often find that some apps that integrate with ldap and tls get picky about the cert..thats why I think it might be the fact that I am using a self signed cert (which is common on AD servers). Usually, there is a way to tell the application “ignore the fact that it is self signed, accept it anyway” Tony From: Brandon Lund<mailto:brandon@kansas.net> Sent: Wednesday, February 16, 2022 3:08 PM To: Observium<mailto:observium@observium.org> Cc: Tony Guadagno<mailto:tonyg@guadagno.org> Subject: Re: LDAP auth to MS AD with TLS Self Signed Cert looks like you need to enable tls for ad to start listing for ldaps no experience just a quick search. https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl… [https://docs.microsoft.com/en-us/media/logos/logo-ms-social.png]<https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl…> Enable Lightweight Directory Access Protocol (LDAP) over Secure Sockets Layer (SSL) - Windows Server | Microsoft Docs<https://docs.microsoft.com/en-us/troubleshoot/windows-server/identity/enabl…> docs.microsoft.com Describes how to enable LDAP over SSL with a third-party certification authority. Thanks Brandon Lund KansasNet Internet Services 785-776-1452 From: observium <observium-bounces(a)observium.org> on behalf of Tony Guadagno via observium <observium(a)observium.org> Sent: Wednesday, February 16, 2022 1:49 PM To: Tony Guadagno via observium Cc: Tony Guadagno Subject: [Observium] LDAP auth to MS AD with TLS Self Signed Cert Hi, I have ldap auth working mostly, if I set tls to false, I can authenticate. However, I want to be secure and when I enable tls, I get a debug error that says: Error binding to LDAP server: servername.local: Can’t contact LDAP server I am guessing the issue is the self signed cert that my server is using. My question is…how do I configure Observium to accept self signed certs for ldap? thanks Tony

1 0

LDAP auth to MS AD with TLS Self Signed Cert
by Tony Guadagno 16 Feb '22

16 Feb '22

Hi, I have ldap auth working mostly, if I set tls to false, I can authenticate. However, I want to be secure and when I enable tls, I get a debug error that says: Error binding to LDAP server: servername.local: Can’t contact LDAP server I am guessing the issue is the self signed cert that my server is using. My question is…how do I configure Observium to accept self signed certs for ldap? thanks Tony

2 1

Hosts
by Jacek.Dabrowski＠selgros.pl 16 Feb '22

16 Feb '22

Hello, I have a question Is it possible to export a list of all hosts in Observium to txt/csv file ? Regards Jacek Dąbrowski

4 4

Alert dependency
by Toky ANDRIANASOLO 09 Feb '22

09 Feb '22

Hello, Is it possible to set an alert dependency on observium? for example if there are 04 devices on the network: 01 router and 03 cascading switches.. If the router goes down, we do not need the 03 switches sending an alert anymore as they depends on the router. This will save us from flooding alert and make the alerting system more efficient. Thank You and Regards, Toky,

2 1

alert sensibility setting
by Toky ANDRIANASOLO 09 Feb '22

09 Feb '22

Hello, we are setting an alert based on device status metric, so if the device status is 0 (down), an alert will be sent to a group of mail destination.. Now we want to adjust the alert sensibility of observium in order to sent the mail if the device is down for 10 mn, in other words, if the device is down then up after 8mn for example, we don't want to be alerted. Thank you and Regads, Toky

2 2

poller overwrites manual sensor limits
by Joey Stanford 05 Feb '22

05 Feb '22

Hi, We’ve disabled service discovery in order to zero in on why custom sensor limits are being overwritten. As far as we can ascertain, it appears that the poller is doing this but we’re not sure when/how since it doesn’t reset on every poll. It’s so transient that we’re finding it very difficult to identify the actual culprit. Can anyone offer tips on how we can debug this further? Thanks, Joey

1 0

Sending device status to external status page
by Joey Stanford 30 Jan '22

30 Jan '22

Hi, Ideas wanted. As a service provider, I want to expose basic up/down status to my consumers, So they can self-discover if a portion of the network in their area is affected. In my case, I have emergency communication systems and I would love to make some of these visible in an up/down fashion to people. A status page or uptime robot basic presentation. Any ideas on how I might do this? Joey

2 1

Abort during initial installation
by marco＠gallux.de 26 Jan '22

26 Jan '22

I have the following problem. On a freshly installed Debian11 system I get the following error message. It doesn't matter whether I do the installation via script or manually. #### ERROR #### root@netservice:/opt/observium# ./discovery.php -u PHP Fatal error: Uncaught mysqli_sql_exception: Table 'observium.observium_attribs' doesn't exist in /opt/observium/includes/db/mysqli.inc.php:315 Stack trace: #0 /opt/observium/includes/db/mysqli.inc.php(315): mysqli_query() #1 /opt/observium/includes/db.inc.php(224): dbCallQuery() #2 /opt/observium/includes/db/mysqli.inc.php(426): dbQuery() #3 /opt/observium/includes/common.inc.php(170): dbFetchRow() #4 /opt/observium/includes/sql-config.inc.php(100): get_obs_attrib() #5 /opt/observium/discovery.php(19): include('...') #6 {main} thrown in /opt/observium/includes/db/mysqli.inc.php on line 315 ######## what am I doing wrong? I knit according to the instructions.

2 1

All graphs stopped at Jan 1st 00:00
by Richard Waardijk 26 Jan '22

26 Jan '22

Hi, I did not notice it earlier but somehow all graphs stopped on Jan 1st 00:00 ? Doesn't matter for which device I look or at what type of graph. The graphs look like this: [cid:image003.png@01D81120.552DF310] [cid:image004.png@01D81120.552DF310] Does anyone have seen this before? I haven't made changes to the Observium installation recently. I only updated the OS where Observium is running (was running on an old Ubuntu 16.02 version and is now upgrades to Ubuntu 20.04). But that was done in week 50 (the week of Dec 13th) and after that the graphs still worked. So strange that it exactly stopped at midnight of the new year? [cid:image005.png@01D81120.552DF310] If anybody got tips how to get this working again please let me know. Thank you, Richard

2 3

graphs shows peaks huawei S6700
by Ing. Andrés Gallo 25 Jan '22

25 Jan '22

Hello I'm using Observium latest version. Most of the grapsh for interfaces are pretty good. But for 2 Huaweis switches S6730, the collected data appears kind of 'saw': Same device, polled with a Cacti server, shows this way: A few 'spikes' but far more smooth graph. The polling time is between 10 to 13 seconds, CPU ok, memory too. Can someone have an idea what to do to avoid the spikes? Regards -- Saludos Saludos, * Ing. Andrés E. Gallo* Tel (02255)-46-1641 Móvil (02255)-15-57-0220 Paseo 114 y Av. 3 (B7165) Villa Gesell-Bs.As. agallo(a)cotel.com.ar http://www.gesell.com.ar

1 0

Dashboard Map Device Count
by Anthony Milazzo 22 Jan '22

22 Jan '22

Hi I've been having an issue with the number of devices per location not being correct when displayed on the Dashboard Map. A few of our sites have the correct count, but most do not. From the list view everything is ok. The devices accessible and are set to a location that is geolocating to coordinates, but it's like they're not being counted properly. Thanks Tony

3 4

Apllication for new devices not seen
by walter＠onda.ch 18 Jan '22

18 Jan '22

Hello Maybe I miss smeething... I have add some new devices and no of them is showing the aplication like apache. In the application tab of the properties is also empty. But telnet <host> 36602 are displaying information like the other device, where the app is installed and showing in Observium Any idea? Regards Walter

4 7

Issue SAI/UPS
by Arnoldo Vidal Bravo 12 Jan '22

12 Jan '22

Hello, for some time the snmp revision of a UPS tells us that it was restarted 43 minutes ago, and it has not been restarted in a year (only for maintenance). A blue box indicates "restarted", then it disappears and at the same time it appears again. What could be the problem? Vendor/Hardware Socomec MASTERYS 3/3 SYSTEM 90 kVA Operating system Net Vision UPS 7023511133) System name net vision [image: image.png] -- Saluda cordialmente

2 1

Monitoring IPV6 only host
by thibs＠thibs.com 10 Jan '22

10 Jan '22

Hello, I’ve removed IPV4 address to some monitored Linux host Before the removal, those hosts were correctly monitored. My Observium host is both IPV4 and IPV6 connected. I’m using the really latest one stable version : Observium Professional 21.12.11831 I’m able to make manual SNMP requests from the Observium host to the IPV6 hosts snmpwalk -v 2c -c PRIVATE_SNMP_COMMUNITY FQDN-IPV6 This first command is successful but this second one shows me an error : /opt/observium/poller.php -d -h FQDN-IPV6 ... CMD[/usr/bin/snmpget -v2c -c *** -Pud -OQUsn -m SNMPv2-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':' FQDN-IPV6':'161' .1.3.6.1.2.1.1.2.0 .1.3.6.1.2.1.1.3.0] CMD EXITCODE[1] CMD RUNTIME[0.0045s] STDOUT[ ] STDERR[ snmpget: Unknown host (udp: FQDN-IPV6:161) ] SNMP STATUS[FALSE] o Device status Device is not responding to SNMP requests RRD /opt/observium/rrd/ FQDN-IPV6/status.rrd already exists - no need to create. Is it a known limitation ? Did I do something wrong ? Best Regards Thibault

3 4

Observium 11835 broken?
by David Milton 08 Jan '22

08 Jan '22

Hello, I was noticing a new version so did my usual: 15:01 dmilton@saison:/opt/observium$ sudo svn up [sudo] password for dmilton: Updating '.’: ..snip.. A update/457.sql A update/458.sql U . Updated to revision 11835. 15:02 dmilton@saison:/opt/observium$ sudo ./discovery.php -u ___ _ _ / _ \ | |__ ___ ___ _ __ __ __(_) _ _ _ __ ___ | | | || '_ \ / __| / _ \| '__|\ \ / /| || | | || '_ ` _ \ | |_| || |_) |\__ \| __/| | \ V / | || |_| || | | | | | \___/ |_.__/ |___/ \___||_| \_/ |_| \__,_||_| |_| |_| Observium Professional 21.12.11831 https://www.observium.org -- Updating database/file schema 456 -> 457 # (db) ..... Done (0s). 457 -> 458 # (db) ... Done (0s). -- Done. -- Observium is up to date. The first thing I noticed is that the index.html permissions were wrong: -rw------- 1 root root 25K Jan 4 15:02 index.php I fixed that but now it is complaining about a missing function: [Tue Jan 04 15:42:30.029551 2022] [php7:error] [pid 10509:tid 140735418468096] [client 204.83.3.136:51456] PHP Fatal error: Uncaught Error: Call to undefined function print_error() in /opt/observium/html/index.php:20\nStack trace:\n#0 {main}\n thrown in /opt/observium/html/index.php on line 20 So what are the next steps? Thanks, Dave.

4 5

PHP error on update
by Joey Stanford 08 Jan '22

08 Jan '22

PHP Fatal error: Uncaught Error: Call to undefined function mb_strtolower() in /opt/observium/libs/Phpfastcache8/Core/Pool/IO/IOHelperTrait.php:123 Stack trace: #0 /opt/observium/libs/Phpfastcache8/Drivers/Files/Driver.php(60): Phpfastcache\Drivers\Files\Driver->getPath() #1 /opt/observium/libs/Phpfastcache8/Core/Pool/DriverBaseTrait.php(75): Phpfastcache\Drivers\Files\Driver->driverCheck() #2 /opt/observium/libs/Phpfastcache8/Drivers/Files/Driver.php(52): Phpfastcache\Drivers\Files\Driver->__parentConstruct(Object(Phpfastcache\Drivers\Files\Config), '967045f41b52c87...') #3 /opt/observium/libs/Phpfastcache8/CacheManager.php(189): Phpfastcache\Drivers\Files\Driver->__construct(Object(Phpfastcache\Drivers\Files\Config), '967045f41b52c87...') #4 /opt/observium/includes/cache.inc.php(603): Phpfastcache\CacheManager::getInstance('Files') #5 /opt/observium/includes/sql-config.inc.php(310): include_once('/opt/observium/...') #6 /opt/observium/discovery.php(19): include('/opt/observium/...') #7 {main} thrown in /opt/observium/libs/Phpfastcache8/Core/Pool/IO/IOHelperTrait.php on line 123

4 10

svn update problem
by Hubacek, Ondrej 06 Jan '22

06 Jan '22

Hello, i have problem with updating Observium professional subscription via svn update. I got following message from server. root@otobsrvx:/opt/observium# svn update Updating '.': Error validating server certificate for 'https://svn.observium.org:443': - The certificate is not issued by a trusted authority. Use the fingerprint to validate the certificate manually! Certificate information: - Hostname: svn.observium.org - Valid: from Dec 3 20:01:51 2021 GMT until Mar 3 20:01:50 2022 GMT - Issuer: sia.conti.de, GF FCLIT CIT IN OP CS IAS, Continental AG, Frankfurt, Hessen, DE - Fingerprint: EF:F9:E2:5F:F9:31:10:02:6A:AD:8C:B9:8F:14:6F:F6:80:8D:D3:DB (R)eject, accept (t)emporarily or accept (p)ermanently? p Authentication realm: https://svn.observium.org:443 Observium Professional Repository Password for 'Barum-9395738': ******** Authentication realm: https://svn.observium.org:443 Observium Professional Repository Username: ^Csvn: E170013: Unable to connect to a repository at URL 'https://svn.observium.org/svn/observium/branches/stable'<https://svn.observium.org/svn/observium/branches/stable%27> svn: E200015: The operation was interrupted Do you have any advice how to resolve it? Thank you Hezký den / Best regards, Bc. Ondřej Hubáček IT Network Specialist Continental Tire Plant Otrokovice Visitor’s address/Billing address: Continental Barum s.r.o. Objízdná 1628, 765 02 Otrokovice, Czech Republic Phone: +420 577 512 765 Cell-phone: +420 739 604 074 E-mail: ondrej.hubacek(a)barum.cz<mailto:ondrej.hubacek@barum.cz> Web: www.continental.cz<http://www.continental.cz/> [cid:image001.png@01D80157.6AAE25D0] Continental Barum s.r.o., Objízdná 1628, 765 02 Otrokovice, The Czech Republic. Executive heads: Ing Libor Láznička, Ph.D., Ing. Jan Černošek, Ing. Pavol Červenák. Company registred: by the District Court in Brno, File No. C 15057. IČ: 45788235 I DIČ: CZ699000347 I DIČ: SK4020104055 Internal

3 2

Re: [Observium] [EXTERNAL SENDER] Re: Observium Pro update error
by Hamilton, Kent 04 Jan '22

04 Jan '22

Ignore me, found the issue? On 1/4/22, 08:52, "Adam Armstrong" <adama(a)observium.org<mailto:adama@observium.org>> wrote: This would seem to be some sort of internal MySQL error. Adam. Sent from my iPhone On 4 Jan 2022, at 14:40, Hamilton, Kent <KHamilton(a)exegy.com> wrote: I’m getting the following after updating today. # discovery.php -u ___ _ _ / _ \ | |__ ___ ___ _ __ __ __(_) _ _ _ __ ___ | | | || '_ \ / __| / _ \| '__|\ \ / /| || | | || '_ ` _ \ | |_| || |_) |\__ \| __/| | \ V / | || |_| || | | | | | \___/ |_.__/ |___/ \___||_| \_/ |_| \__,_||_| |_| |_| Observium Professional 21.12.11831 https://www.observium.org -- Updating database/file schema 457 -> 458 # (db) FF stopped. Critical error: (3664) Failed to set SDI '<no schema>.<no table>' in tablespace 'observium/#sql2-607-48b2a8'. ________________________________ This e-mail and any documents accompanying it may contain legally privileged and/or confidential information belonging to Exegy, Inc. Such information may be protected from disclosure by law. The information is intended for use by only the addressee. If you are not the intended recipient, you are hereby notified that any disclosure or use of the information is strictly prohibited. If you have received this e-mail in error, please immediately contact the sender by e-mail or phone regarding instructions for return or destruction and do not use or disclose the content to others.

1 0

Observium Pro update error
by Hamilton, Kent 04 Jan '22

04 Jan '22

I’m getting the following after updating today. # discovery.php -u ___ _ _ / _ \ | |__ ___ ___ _ __ __ __(_) _ _ _ __ ___ | | | || '_ \ / __| / _ \| '__|\ \ / /| || | | || '_ ` _ \ | |_| || |_) |\__ \| __/| | \ V / | || |_| || | | | | | \___/ |_.__/ |___/ \___||_| \_/ |_| \__,_||_| |_| |_| Observium Professional 21.12.11831 https://www.observium.org -- Updating database/file schema 457 -> 458 # (db) FF stopped. Critical error: (3664) Failed to set SDI '<no schema>.<no table>' in tablespace 'observium/#sql2-607-48b2a8'. ________________________________ This e-mail and any documents accompanying it may contain legally privileged and/or confidential information belonging to Exegy, Inc. Such information may be protected from disclosure by law. The information is intended for use by only the addressee. If you are not the intended recipient, you are hereby notified that any disclosure or use of the information is strictly prohibited. If you have received this e-mail in error, please immediately contact the sender by e-mail or phone regarding instructions for return or destruction and do not use or disclose the content to others.

1 0

Arista VARP IP addresses not being discovered?
by Adam Thompson 31 Dec '21

31 Dec '21

We’ve noticed that although Observium picks up the VRRPv3 virtual IP addresses on our Cisco NX-OS switches, it does not detect or capture the VARP virtual IP addresses on our Arista EOS switches. Is that expected behaviour? If so, what information do you need to change Observium so that it can detect VARP IPs and display them on the appropriate interfaces? If not, what debug output should I be looking at – discovery? Polling? Which section? Thanks, -Adam Adam Thompson Consultant, Infrastructure Services [MERLIN] 100 - 135 Innovation Drive Winnipeg, MB, R3T 6A8 (204) 977-6824 or 1-800-430-6404 (MB only) athompson(a)merlin.mb.ca<mailto:athompson@merlin.mb.ca> www.merlin.mb.ca<http://www.merlin.mb.ca/>

3 2

Alerting feature request
by Joey Stanford 30 Dec '21

30 Dec '21

From my colleagues: > > What we would REALLY like is the ability to turn off alerts on a particular device for a specified amount of time. For example, when Winter Park goes flakey but it is really Comcast or Centurylink that need to fix the problem, I don't want alerts every 10 minutes to tell me the link still sucks. > > There are several possible solutions to this. One is a manual "suppress alerts for X hours". It is important that the alerts be turned back on after the specified time because otherwise we tend to forget to turn it back on. > > Another option is a rate limit on alerts by device. After 5 alerts I probably figured out the link sucks. > > A third option is a "delay on recover". Right now we get a recover as soon as one check passes. If it is flakey we may want to have more checks pass before declaring it recovered. This would probably be something we want to do by device, because from most I want to know as soon as it is back.

4 4

alert boxes
by Arnoldo Vidal Bravo 30 Dec '21

30 Dec '21

hi, we were administrative problems to update observium from version 18 to 21, in latest version alert or warning box could show "...XX more", how we can view this alerts? in version 18 all alerts was show. -- Saluda cordialmente

3 2

power converter AC to DC - Huawei ETP4860-B1A2
by Andre Bolzan 28 Dec '21

28 Dec '21

Hello ! We received two unit of Huawei ETP4860-B1A2 with manager module SNMP, this power converterAC to DC for 48V telecommunications equipments. When we add the equipments in observium , it's show "generical" device. We asked Huawei about thi4e case and Huawei told us if the "current regular mib" had the OIDs for ETP4860. We try to make observium discoveries about the correct type "power" and vendor "huawei" to get the power information, like load, AC entry, baterya load, and so on... We was fight with this equipment more 1 year and can't make running =( We flap the "loss flag" and ask for help for anyone who can help us. [image: image.png] follow in attach the Huawei current MIB, the equipment MIB downloaded in web page and our "mapping informations" [image: image.png] Thanks in advance ! Sorry my english... We are a brazilian team =) -- *André Bolzan* *+55 11 98205-7742*

1 0

(no subject)
by Rahul M 24 Dec '21

24 Dec '21

Hi team, Can we set an alert mechanism for the virtual machine status, which observium pulled out from the VMware ?

1 0

integrate Observium with Grafana
by Luis Olavarrieta 23 Dec '21

23 Dec '21

Hi guys, has anyone integrated Observium with Grafana to create dashboards? I don’t know the structure of the DB in observium and have been doing some test with no luck on the results, so any examples will be really appreciated. Regard,s Luis

6 5

issue on device
by Arnoldo Vidal Bravo 23 Dec '21

23 Dec '21

hi, we have a UPS Socomec MASTERYS 3/3 SYSTEM 90 kVA, and alert boxes shows many ports down, [image: image.png] this UPS has only 1 port observium 21.10.11678 (stable) -- Saluda cordialmente

3 2

syslog issues
by Brad Bendy 22 Dec '21

22 Dec '21

Spent hours on this and am at a loss. Got some hosts that won't have syslog show up in the GUI, digging further the DB shows the IP not the hostname for those records, so that makes sense why they are not showing up. Looking at the actual data coming over syslog the devices that work and don't work show the exact same format. Nothing different at all, and identical configs on identical devices. Is there a debug or another log that I am not seeing that would show why these entries are getting inserted into the DB as IP addresses and not being replaced with hostnames? At a loss, any suggestions would be great! Thanks

2 1

graph on home page
by Arnoldo Vidal Bravo 21 Dec '21

21 Dec '21

hi, I need show a traffic in and out (graph) only on 1 interface, how i can do? i have a group for identify the interface... device in X and port label short Y, but only show the totals, not detail [image: image.png] i hope to view this [image: image.png] -- Saluda cordialmente

2 2

observium graphs
by Arnoldo Vidal Bravo 21 Dec '21

21 Dec '21

hi, I doing work 100% on an observium in deploy mode, but i must customize some views. To make this, i have a second observium (web ui) linked to the main observium, but i can`t see the graphs. The rrdcached must be configured on the second observium? -- Saluda cordialmente

2 1

Ruckus zone director support
by Brandon Lund 20 Dec '21

20 Dec '21

is anyone monitoring ruckus zone directors? it looks like it provides a bunch of useful info via snmp but observium is not graphing much other then the bandwidth on the interfaces. main thing i am looking for would be a graph of the number of ap's connected. 1.3.6.1.4.1.25053.1.2.1.1.1.15.1.0 aka online ap number RUCKUS-ZD-SYSTEM-MIB::ruckusZDSystemStatsNumAP.0 = Gauge32: 15 ^ is a oid i found from a script i run against my Nagios to monitor the same stat, just would like a graph also. i am sure there is lots of other useful info also ,eg number of clients connected per wlan, per ap, etc. it looks like you already have the mib file for these installed but i am not sure where i would start customizing the code. i would think i need to make a new OS for ruckus zonedirector different than ruckus aps, and then have that apply these mibs, but i am unsure where i should start. Thanks Brandon Lund KansasNet Internet Services 785-776-1452

2 1

issue on version 21.10.11678
by Arnoldo Vidal Bravo 20 Dec '21

20 Dec '21

we have a many switch configured on observium, last friday we done a update of observium, but some switch alert CPU use over 80% on CPU 1, but the device has not have CPU 1. how restrict an alert to only CPU 0? -- Saluda cordialmente

1 0

Change License details
by Thodoris Lakiotis 18 Dec '21

18 Dec '21

Hi, Is there any work around, to which actions we need to do for changing license details in a working subscription environment? Current license terminated and renewed with different username & password Thanks! Thodoris

2 1

Re: [Observium] question about wmi
by Tony Guadagno 17 Dec '21

17 Dec '21

Rando, I followed this KB https://docs.observium.org/device_windows/ and it just worked. The reason I asked the questions is that it is not immediately obvious that it is working or not. The poller.php -m wmi -v proves it is working but also, I realized that if wmi is working, then your Microsoft devices will show a “windows services” tab. Also, I have Observium installed on RHEL 8. There seems to be no wmi package for version 8 (CentOS or RHEL). I installed the wmi RPM for version 7 and it seems to be working…fyi Good luck Tony From: Rando Sui Sent: Friday, December 17, 2021 6:29 AM To: Observium Cc: Tony Guadagno Subject: RE: [Observium] question about wmi Hello, How did you get WMI working and passing info? Greetings, Rando. From: observium <observium-bounces(a)observium.org> On Behalf Of Tony Guadagno via observium Sent: kolmapäev, 15. detsember 2021 20:33 To: Observium <observium(a)observium.org> Cc: Tony Guadagno <tonyg(a)guadagno.org> Subject: Re: [Observium] question about wmi All, thanks for the help….i think wmi is working because I am now seeing the “windows services” tab on my windows servers. That was not present before. Thanks again Tony From: Adam Armstrong via observium Sent: Tuesday, December 14, 2021 7:08 PM To: 'Observium' Cc: Adam Armstrong Subject: Re: [Observium] question about wmi There’s not likely to be any WMIC messages in that log, not much goes into there. WMIC isn’t used for very much. It slightly improves some windows data, mostly storage. You’ll probably see whatever it does by doing a debugged poller run for the device you’re using WMIC with. Adam. From: observium <observium-bounces(a)observium.org> On Behalf Of Tony Guadagno via observium Sent: 14 December 2021 18:36 To: Pisano, Anthony D. via observium <observium(a)observium.org> Cc: Tony Guadagno <tonyg(a)guadagno.org> Subject: [Observium] question about wmi Hi, I have enabled wmi on my install. I have tested my config with wmic and it seems to work. I have put the global parms in and I am not seeing any log messages about wmi. How do I know if wmi is being attempted? [2021/12/14 18:30:01 +0000] discovery.php(560036): /opt/observium/discovery.php: new - 0 devices discovered in 0.001 secs [2021/12/14 18:30:04 +0000] poller.php(560053): poller.php: abc-wolcott2.company.local - 1 devices polled in 2.943 secs [2021/12/14 18:30:07 +0000] poller.php(560051): poller.php: abc-lyo-sw-3.company.local - 1 devices polled in 5.134 secs [2021/12/14 18:30:07 +0000] poller.php(560049): poller.php: abc-observium.company.local - 1 devices polled in 5.509 secs [2021/12/14 18:30:12 +0000] poller.php(560047): UNIX-AGENT: Connection on tcp://abc-esx15.company.local:36602 failed. ERROR: 110 Connection timed out [2021/12/14 18:30:14 +0000] poller.php(560047): poller.php: abc-esx15.company.local - 1 devices polled in 12.67 secs [2021/12/14 13:30:14 -0500] poller-wrapper.py(560037): /opt/observium/poller-wrapper.py: processed 4 devices in 13.78 seconds with 4 threads, load average (5min) 0.13 Tony

1 0

Re: [Observium] question about wmi
by Tony Guadagno 17 Dec '21

17 Dec '21

All, thanks for the help….i think wmi is working because I am now seeing the “windows services” tab on my windows servers. That was not present before. Thanks again Tony From: Adam Armstrong via observium Sent: Tuesday, December 14, 2021 7:08 PM To: 'Observium' Cc: Adam Armstrong Subject: Re: [Observium] question about wmi There’s not likely to be any WMIC messages in that log, not much goes into there. WMIC isn’t used for very much. It slightly improves some windows data, mostly storage. You’ll probably see whatever it does by doing a debugged poller run for the device you’re using WMIC with. Adam. From: observium <observium-bounces(a)observium.org> On Behalf Of Tony Guadagno via observium Sent: 14 December 2021 18:36 To: Pisano, Anthony D. via observium <observium(a)observium.org> Cc: Tony Guadagno <tonyg(a)guadagno.org> Subject: [Observium] question about wmi Hi, I have enabled wmi on my install. I have tested my config with wmic and it seems to work. I have put the global parms in and I am not seeing any log messages about wmi. How do I know if wmi is being attempted? [2021/12/14 18:30:01 +0000] discovery.php(560036): /opt/observium/discovery.php: new - 0 devices discovered in 0.001 secs [2021/12/14 18:30:04 +0000] poller.php(560053): poller.php: abc-wolcott2.company.local - 1 devices polled in 2.943 secs [2021/12/14 18:30:07 +0000] poller.php(560051): poller.php: abc-lyo-sw-3.company.local - 1 devices polled in 5.134 secs [2021/12/14 18:30:07 +0000] poller.php(560049): poller.php: abc-observium.company.local - 1 devices polled in 5.509 secs [2021/12/14 18:30:12 +0000] poller.php(560047): UNIX-AGENT: Connection on tcp://abc-esx15.company.local:36602 failed. ERROR: 110 Connection timed out [2021/12/14 18:30:14 +0000] poller.php(560047): poller.php: abc-esx15.company.local - 1 devices polled in 12.67 secs [2021/12/14 13:30:14 -0500] poller-wrapper.py(560037): /opt/observium/poller-wrapper.py: processed 4 devices in 13.78 seconds with 4 threads, load average (5min) 0.13 Tony

2 1

Re: [Observium] Cannot buy Subscription for Professional version
by Thodoris Lakiotis 17 Dec '21

17 Dec '21

Hello Everything were sorted out!! Subscription is done. The question is: How can i license current Observium Installation with the new license details? Thanks!! Thodoris On Thu, Dec 16, 2021 at 1:21 PM Thodoris Lakiotis <tlak(a)synapsecom.gr> wrote: > Hello > > I feel here that you are not got what is the point. > > The subscription is canceled. This is done. End of story. > > Now i need to buy again, but just for one year, without yearly > subscription. But paddle do not give that option by default. I can for sure > do it as you suggest, but i just can't proceed, because my PayPal account > do not allow to buy subscription based services, but only one-off. > From PayPal they say that the merchant do not allow to pay with PayPal > balance?!? > > Is this more clear? > > Thodoris > > On Thu, Dec 16, 2021 at 12:55 PM Simon Smith via observium < > observium(a)observium.org> wrote: > >> Hi, >> >> Why not subscribe for the year, >> >> Let paddle take the money, >> >> Let observium give you user/pass etc in there panel, >> >> Then in a days time, go into the observium panel and cancel your >> subscription with paddle? >> >> Then it wont auto-renew next year!? >> >> Regards >> >> Simon >> >> On 16 Dec 2021, at 10:39, Thodoris Lakiotis via observium < >> observium(a)observium.org> wrote: >> >> Hi Adam, thanks for your responce. >> >> The problems here are that i cannot find a representative from Paddle. >> And i cannot buy one year license without subscription. I need one-off >> payments, not recurring with subscriptions. >> >> Is there anyone from paddle that could help me address this issue. >> Dear Lord, we just need to buy your software, there nust be something >> done!! >> >> Thanks!! >> >> On Wed, Dec 15, 2021 at 10:54 PM Adam Armstrong via observium < >> observium(a)observium.org> wrote: >> >>> Hi Theodore, >>> >>> >>> >>> What’s the problem? >>> >>> >>> >>> We have limited ability to do much with the Paddle platform except for >>> cancel things, though. J >>> >>> >>> >>> Thanks, >>> >>> Adam. >>> >>> >>> >>> *From:* observium <observium-bounces(a)observium.org> *On Behalf Of *Thodoris >>> Lakiotis via observium >>> *Sent:* 15 December 2021 15:29 >>> *To:* Observium <observium(a)observium.org> >>> *Cc:* Thodoris Lakiotis <tlak(a)synapsecom.gr> >>> *Subject:* [Observium] Cannot buy Subscription for Professional version >>> >>> >>> >>> Hello Team!! >>> >>> I need help to address an issue with the renewal of our subscription >>> with Professional Observium. >>> >>> I cannot find resolution, so far, with paddle. >>> >>> Is there anybony could help me from Observium team? >>> >>> >>> >>> Thanks and Regards, >>> >>> >>> >>> Theodore >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >

1 0

Re: [Observium] add support for ASCO Transfer switch
by Tony Guadagno 16 Dec '21

16 Dec '21

Adam, happy to do that, can you give me the snmpwalk syntax you would like? It seems like transfer switches and generators are the worst mibs…but its all I have to go on. thanks Tony From: Adam Armstrong via observium Sent: Thursday, December 16, 2021 11:03 AM To: 'Observium' Cc: Adam Armstrong Subject: Re: [Observium] add support for ASCO Transfer switch Hi Tony, That’s something of a horrific MIB. It doesn’t use tables properly and has really bad oid numbering, so isn’t the easiest thing to support. You should probably open a jira and provide the mib along with an snmp walk in the format the ticket requests at https://jira.observium.org Adam. From: observium <observium-bounces(a)observium.org> On Behalf Of Tony Guadagno via observium Sent: 16 December 2021 13:37 To: Pisano, Anthony D. via observium <observium(a)observium.org> Cc: Tony Guadagno <tonyg(a)guadagno.org> Subject: [Observium] add support for ASCO Transfer switch Hi, could you please evaluate this mid. Currently you show the Asco icon but no other information. I would like to see transfer switch state etc. Let me know if you need anything else, I will be happy to gather logs. Thanks Tony

1 0

add support for ASCO Transfer switch
by Tony Guadagno 16 Dec '21

16 Dec '21

Hi, could you please evaluate this mid. Currently you show the Asco icon but no other information. I would like to see transfer switch state etc. Let me know if you need anything else, I will be happy to gather logs. Thanks Tony

2 1

Cannot buy Subscription for Professional version
by Thodoris Lakiotis 16 Dec '21

16 Dec '21

Hello Team!! I need help to address an issue with the renewal of our subscription with Professional Observium. I cannot find resolution, so far, with paddle. Is there anybony could help me from Observium team? Thanks and Regards, Theodore

3 3

what do you need to add support for a device?
by Tony Guadagno 15 Dec '21

15 Dec '21

Hi, I have a couple of devices that are under supported or not supported. I have manufacturers mibs for them, what else would you need to evaluate them for support? thanks Tony

1 0

question about wmi
by Tony Guadagno 15 Dec '21

15 Dec '21

Hi, I have enabled wmi on my install. I have tested my config with wmic and it seems to work. I have put the global parms in and I am not seeing any log messages about wmi. How do I know if wmi is being attempted? [2021/12/14 18:30:01 +0000] discovery.php(560036): /opt/observium/discovery.php: new - 0 devices discovered in 0.001 secs [2021/12/14 18:30:04 +0000] poller.php(560053): poller.php: abc-wolcott2.company.local - 1 devices polled in 2.943 secs [2021/12/14 18:30:07 +0000] poller.php(560051): poller.php: abc-lyo-sw-3.company.local - 1 devices polled in 5.134 secs [2021/12/14 18:30:07 +0000] poller.php(560049): poller.php: abc-observium.company.local - 1 devices polled in 5.509 secs [2021/12/14 18:30:12 +0000] poller.php(560047): UNIX-AGENT: Connection on tcp://abc-esx15.company.local:36602 failed. ERROR: 110 Connection timed out [2021/12/14 18:30:14 +0000] poller.php(560047): poller.php: abc-esx15.company.local - 1 devices polled in 12.67 secs [2021/12/14 13:30:14 -0500] poller-wrapper.py(560037): /opt/observium/poller-wrapper.py: processed 4 devices in 13.78 seconds with 4 threads, load average (5min) 0.13 Tony

3 2

alert box info
by Arnoldo Vidal Bravo 13 Dec '21

13 Dec '21

Hi, In the alert boxes... we can choose display a sysName or hostname?... -- Saluda cordialmente

1 0

M;onitoring Squid with Observium
by Hofer, Elmar (BITBW) 13 Dec '21

13 Dec '21

Dear list, I want to monitor my squid instances on snmp port 3401 udp with observium. But when I try to add the device (here squid on port 3401 udp) I don't get an answer. With cacti everything works well, an even with snmpwalk and snmp v1 I get an answer. How can I add squid to observium ? Help is always welcome. Thanks. Yours Elmar Hofer Systemspezialist Sicherheitstechnik BITBW IT Baden Württemberg Abteilung 3 Referat 31 - Operative Sicherheit Krailenshaldenstraße 44 70469 Stuttgart Telefon: +49 (0)711 8910-648 Fax: +49 (0)711 8910-97696 E-Mail: elmar.hofer(a)bitbw.bwl.de<mailto:elmar.hofer@bitbw.bwl.de> Internet: http://www.bitbw.de<http://www.bitbw.de/>

2 3

Rolling 11803
by Serghei Golipad 10 Dec '21

10 Dec '21

I've just updated to above to find out that Observium page doesn't load up (HTTP500), can see a lot of changes to PHP, anyone experienced the same? Thank you. PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 1 New Change, London, EC4M 9AF. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence.>/p> For more information about CDW please visit https://www.uk.cdw.com

2 2

Need Assist in Syslog
by Rahul M 09 Dec '21

09 Dec '21

Hi Team, I had purchased the professional edition need assistance in the below-listed things. 1. Syslog Integration from IP-PHONES 2. How the Location works in observium 3. Alert checker

1 0

Información Licencia Enterprise (Observium).
by etrejo＠viginet.com.ve 08 Dec '21

08 Dec '21

Buenas tardes ! Saludos, este correo tiene como finalidad hacerles saber que en estos momentos estamos utilizando la versión Community desde hace tiempo para nuestra empresa; nuestras expectativas por los momentos es llegar a la versión Enterprise, por esta razón nos gustaría que nos canalicen esta información para poder concretar una sesión o algún contacto que nos pudiera guiar y poder exponer las dudas y requerimientos que tenemos en cuanto a la herramienta. Sin mas por el momento y esperando una pronta respuesta me despido. Atte.

1 0

add mib on observium
by Toky ANDRIANASOLO 08 Dec '21

08 Dec '21

Hello, could you please help us on how to add MIB observium Tky Thank you, -- <https://app.livestorm.co/comdata-group/automotive-technologies-leading-to-c…>

1 0

Missing some probes
by Peter Derissen 08 Dec '21

08 Dec '21

Hi all, Today i started looking add the nagios utils probes in Observium. Seems like im missing some probes in the pulldown menu. [cid:image001.png@01D7EB70.8A9A1FE0] [cid:image002.png@01D7EB70.8A9A1FE0] [cid:image003.png@01D7EB70.8A9A1FE0] check_ntp and check_dhcp cannot by found in the pulldown menu. Any way to add them? Kind regards, Met vriendelijke groet, Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [cid:image004.png@01D7EB70.8A9A1FE0]<https://www.eurofiber.nl/> Volg ons op Twitter<https://twitter.com/Eurofiber> | Linkedin<https://www.linkedin.com/company/eurofiber> | Facebook<https://www.facebook.com/eurofiberNL/> | Youtube<https://www.youtube.com/channel/UC6DavgEm7-ktAD8_Co_qnMA> Wilt u op de hoogte blijven van technische ontwikkelingen aan ons netwerk, nieuwe ICT ontwikkelingen en klantervaringen? Meld u dan aan voor onze maandelijkse nieuwsbrief<https://marketing.eurofiber.com/acton/fs/blocks/showLandingPage/a/15570/p/p…>. [cid:image005.jpg@01D7EB70.8A9A1FE0]<https://www.eurofiber.nl/> ******** IMPORTANT NOTICE ******** This e-mail (including any attachments) may contain information that is confidential or otherwise protected from disclosure and it is intended only for the addressees. If you are not the intended recipient, please note that any copying, distribution or other use of information contained in this e-mail (and its attachments) is not allowed. If you have received this e-mail in error, kindly notify us immediately by telephone or e-mail and delete the message (including any attachments) from your system. Please note that e-mail messages may contain computer viruses or other defects, may not be accurately replicated on other systems, or may be subject of unauthorized interception or other interference without the knowledge of sender or recipient. Eurofiber only sends and receives e-mails on the basis that Eurofiber is not responsible for any such computer viruses, corruption or other interference or any consequences thereof. Eurofiber Nederland B.V. is registered in the Chamber of Commerce of Amsterdam with number 34134377, VAT number NL 8088.51.524 B01. Eurofiber N.V. has its registered office at Belgicastraat 5 bus 7, 1930 Zaventem and is registered under national number 0435.204.851. Eurofiber France has its registered office at 21 Avenue de la Cr?ativit?, 59650 Villeneuve d'Ascq and is registered under national number FR 83.822.249.074.

3 3

monitor VPN ipsec
by Toky ANDRIANASOLO 07 Dec '21

07 Dec '21

Hello, Could you please help us on how to import MIB for VPN ipsec fortigate on observium, we need to see more than operation status up/down speaking about VPN monitoring. Thank you and Regards, Toky -- <https://app.livestorm.co/comdata-group/automotive-technologies-leading-to-c…>

1 0

S2S Monitoring and Bandwidth Check
by Njoroge, Joyce (Stadt Ulm) 06 Dec '21

06 Dec '21

Hallo Darren, Thanks so much for that. That's very helpful. Regards, Joyce -----Ursprüngliche Nachricht----- Von: observium <observium-bounces(a)observium.org> Im Auftrag von observium-request(a)observium.org Gesendet: Samstag, 4. Dezember 2021 13:00 An: observium(a)observium.org Betreff: observium Digest, Vol 137, Issue 3 Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Re: S2S Monitoring and Bandwidth Check (Storer, Darren) ---------------------------------------------------------------------- Message: 1 Date: Sat, 4 Dec 2021 01:35:12 +0000 From: "Storer, Darren" <darren.storer(a)gmail.com> To: Observium <observium(a)observium.org> Subject: Re: [Observium] S2S Monitoring and Bandwidth Check Message-ID: <CAHBhi2GxfVRue5j1TZa-Py5jBdnSA4YnKXhC-2Zw4k3dAvEJjw(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Hallo Joyce, Yes, Observium can display the bandwidth being used between two sites. If you are interested in the nature of the data flowing (e.g. destinations and protocols, etc.) then you probably need another tool like ntopng but only if your network equipment supports NetFlow/sFlow exports. To check bandwidth being used, typically you drill down to a specific port on a router or switch and display the data graphically that way. For data flowing between sites via a VPN, you may need to look at IPsec ports, rather than physical ports. Take a look under ports: https://upload.wikimedia.org/wikipedia/commons/a/ad/Observium-ports-march20… MfG Darren On Fri, 3 Dec 2021 at 11:13, Njoroge, Joyce (Stadt Ulm) via observium < observium(a)observium.org> wrote: > Hallo, > I have two questions that I would like to know whether it is possible > to do using Observium: > > 1. Is there a way to monitor the data that flows between site-to-site > locations? > 2. How can I check the bandwidth of a device that is already in > observium? > > Lastly, I understand that mapping is from a 3rd party provider > (OpenStreetMap), but would anyone have had a problem, whereby just > from nowhere locations, that were properly mapped, are not correctly > mapped anymore? A bunch of locations are showing in the middle of the sea. Thanks. > > Regards, > Joyce > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://postman.memetic.org/pipermail/observium/attachments/20211204/bf15b39…> ------------------------------ Subject: Digest Footer _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium ------------------------------ End of observium Digest, Vol 137, Issue 3 *****************************************

1 0

observium + oxidized, anyone test it?
by Torstein Eide 05 Dec '21

05 Dec '21

I found a repository with observium + oxidized. Has anyone tested it? https://github.com/colin-stubbs/observium-oxidized -- Torstein Eide Torsteine(a)gmail.com

1 0

S2S Monitoring and Bandwidth Check
by Njoroge, Joyce (Stadt Ulm) 05 Dec '21

05 Dec '21

Hallo, I have two questions that I would like to know whether it is possible to do using Observium: 1. Is there a way to monitor the data that flows between site-to-site locations? 2. How can I check the bandwidth of a device that is already in observium? Lastly, I understand that mapping is from a 3rd party provider (OpenStreetMap), but would anyone have had a problem, whereby just from nowhere locations, that were properly mapped, are not correctly mapped anymore? A bunch of locations are showing in the middle of the sea. Thanks. Regards, Joyce

3 2

Discovery of IPv6 only hosts
by r0m5 30 Nov '21

30 Nov '21

Hello, I have a problem addind IPv6 only hosts to observium using discovery. For example the "myserver" host in the extract below (part of the result of"/opt/observium/discovery.php -h all -dd") This "myserver" host is discovered as a LLDP neighbor of another host. Then discovery.php tries to connect to "myserver" with snmpget using its IPv6 address. But There are missing brackets in the snmpget command : - failing : /usr/bin/snmpget -v2c -c 'commu' -Pud -OQUsn -m SNMPv2-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp6':'fde6:67ca:25ef:14::17':'161' .1.3.6.1.2.1.1.2.0.1.3.6.1.2.1.1.3.0 - would be OK (adding brackets) : /usr/bin/snmpget -v2c -c 'commu' -Pud -OQUsn -m SNMPv2-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp6':'[fde6:67ca:25ef:14::17]':'161' .1.3.6.1.2.1.1.2.0.1.3.6.1.2.1.1.3.0 How could I solve this issue ? - is there a way to force observium to add brackets ? - or maybe even better to force observium to use the hostname "myserver" to connect using snmpget instead of the IPv6 address ? Regards ! ************************ ##### Module Start: neighbours ##### o LLDP-MIB [...] [139768400.45.41] => array( [lldpRemChassisIdSubtype] => string(10) "macAddress" [lldpRemChassisId] => string(18) "52 54 00 60 4E 17 " [lldpRemPortIdSubtype] => string(10) "macAddress" [lldpRemPortId] => string(18) "52 54 00 60 4E 17 " [lldpRemPortDesc] => string(4) "ens3" [lldpRemSysName] => string(37) "myserver.local.r0m5.eu" [lldpRemSysDesc] => string(95) "Debian GNU/Linux 11 (bullseye) Linux 5.10.0-9-amd64 #1 SMP Debian 5.10.70-1 (2021-09-30) x86_64" [lldpRemManAddrIfId] => string(1) "2" [lldpRemManAddr] => string(39) "fde6:66ba:24ff:0104:0000:0000:0000:0017" [lldpRemMan] => array( [fde6:66ba:24ff:0104:0000:0000:0000:0017] => array( [lldpRemManAddrIfId] => string(1) "2" ) ) ) [...] SQL[SELECT `device_id` FROM `devices` WHERE `hostname` = 'myserver.local.r0m5.eu'] ROWS[0] SQL RUNTIME[0.00016594s] SQL[SELECT `device_id` FROM `devices` WHERE `sysName` = 'myserver.local.r0m5.eu' AND `disabled` = '0'] ROWS[0] SQL RUNTIME[0.00020385s] SQL[SELECT `autodiscovery`.*, UNIX_TIMESTAMP(`last_checked`) AS `last_checked_unixtime` FROM `autodiscovery` WHERE `poller_id` = '0' AND `remote_hostname` = 'myserver.local.r0m5.eu' AND `remote_ip` = 'fde6:67ca:25ef:14::17'] ROWS[1] SQL RUNTIME[0.00026703s] AUTODISCOVERY DEVEL: hostname & ip DB found > $db_entry /opt/observium/includes/discovery/functions.inc.php:636 array( [autodiscovery_id] => string(1) "8" [poller_id] => string(1) "0" [device_id] => string(3) "150" [remote_hostname] => string(37) "myserver.local.r0m5.eu" [remote_ip] => string(22) "fde6:67ca:25ef:14::17" [remote_device_id] => null [protocol] => string(4) "LLDP" [added] => string(19) "2021-11-27 13:11:08" [last_checked] => string(19) "2021-11-28 12:37:37" [last_reason] => string(7) "no_snmp" [last_checked_unixtime] => string(10) "1638099457" ) Remote device checked 7m 26s ago (less than 1 day) o Trying to discover host myserver.local.r0m5.eu (fde6:67ca:25ef:14::17) through LLDP (xdp) /opt/observium/includes/common.inc.php:3679 array() > $dns6 /opt/observium/includes/common.inc.php:3685 array( [0] => array( [host] => string(37) "myserver.local.r0m5.eu" [class] => string(2) "IN" [ttl] => int(20876) [type] => string(4) "AAAA" [ipv6] => string(22) "fde6:67ca:25ef:14::17" ) ) Host myserver.local.r0m5.eu resolved as fde6:67ca:25ef:14::17 Host myserver.local.r0m5.eu (fde6:67ca:25ef:14::17) founded inside configured nets, trying to add: CMD[/usr/bin/fping6 -t 500 -c 1 -q fde6:67ca:25ef:14::17 2>&1] CMD EXITCODE[0] CMD RUNTIME[0.0195s] CMD EXITDELAY[10ms] STDOUT[ fde6:67ca:25ef:14::17 : xmt/rcv/%loss = 1/1/0%, min/avg/max = 17.2/17.2/17.2 ] SQL[SELECT `hostname` FROM `ipv6_addresses` LEFT JOIN `devices` USING(`device_id`) WHERE `disabled` = 0 AND `ipv6_binary` = '��f�$�\0\0\0\0\0\0\0' LIMIT 1] ROWS[0] SQL RUNTIME[0.00051618s] /opt/observium/includes/entities/device.inc.php:54 array( *[hostname] => string(22) "fde6:67ca:25ef:14::17"* [snmp_port] => int(161) [snmp_transport] => string(4) "udp6" [snmp_version] => string(3) "v2c" [snmp_community] => string(4) "commu" ) Trying v2c community commu ... CMD[/usr/bin/snmpget -v2c -c 'commu' -Pud -OQUsn -m SNMPv2-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp6':'fde6:67ca:25ef:14::17':'161' .1.3.6.1.2.1.1.2.0 .1.3.6.1.2.1.1.3.0] CMD EXITCODE[1] CMD RUNTIME[6.0132s] STDOUT[ ] STDERR[ Timeout: No Response from udp6:fde6:67ca:25ef:14::17:161. ] SNMP ERROR - device: , cmd: snmpget, options: -OQUsn, mib: 'SNMPv2-MIB', oid: '.1.3.6.1.2.1.1.2.0 .1.3.6.1.2.1.1.3.0', cmd exitcode: 1, snmp error code: #900, reason: 'isSNMPable', runtime: 6.01322889328 SNMP ERROR - device: , cmd: snmpget, options: -OQUsn, mib: 'SNMPv2-MIB', oid: '.1.3.6.1.2.1.1.2.0 .1.3.6.1.2.1.1.3.0', cmd exitcode: 1, snmp error code: #900, reason: 'isSNMPable', runtime: 6.01322889328 SNMP STATUS[FALSE]

3 4

Cannot get info of Virtual-access CISCO
by Sébastien 65 28 Nov '21

28 Nov '21

Hello, I cannot get/graph the interfaces virtual-access (Vi2.X) of a CISCO ASR1001... Virtual-Access interfaces are in PPPoVPDN mode (ASR is an LNS). Do I have to configure a specific module to retrieve information from Virtual-Access ? Thank you !

2 3

Re: [Observium] Issue in monitoring the API service of Checkpoint Multi Domain Management server.
by SOC.HCL 26 Nov '21

26 Nov '21

Hi Adam, As per below mail trail , please help to find answers of below queries : What is the meaning system it's installed on is too old, too ? What is the meaning of Newer distribution ? I logged in web session of Observium then about Observium but it is showing [cid:image002.png@01D7E2C9.2E8AC830] Is there any other way to check the Observium Version ? Regards, Narender Verma Associate Consultant - HCL Nordea | Infrastructure - Security Mob: +91 8447000611 Manager: Nitin Garg E-mail: narender.verma(a)consult.nordea.com Planned Leave : 10,11 August 2021 Availibility: 8:00 AM to 5 PM CET, Team DL : dlcomSecurity_HCL(a)nordea.com<mailto:dlcomSecurity_HCL@nordea.com> Confidential From: Adam Armstrong <adama(a)observium.org> Sent: Wednesday, November 24, 2021 8:41 PM To: SOC.HCL <SOC.HCL(a)nordea.com> Subject: RE: [Observium] Issue in monitoring the API service of Checkpoint Multi Domain Management server. What version are you running? It seems you have some strange broken install that doesn't even know its own version. The system it's installed on is too old, too. You need to reinstall on a newer distribution. Thanks, Adam. From: SOC.HCL <SOC.HCL(a)nordea.com<mailto:SOC.HCL@nordea.com>> Sent: 24 November 2021 08:58 To: Observium <observium(a)observium.org<mailto:observium@observium.org>> Cc: Adam Armstrong <adama(a)observium.org<mailto:adama@observium.org>>; dlcom Security_HCL <dlcomSecurity_HCL(a)nordea.com<mailto:dlcomSecurity_HCL@nordea.com>> Subject: RE: [Observium] Issue in monitoring the API service of Checkpoint Multi Domain Management server. Hi Team, Firstly the probe option is not coming on our Observium. Please help to get it enabled in observium so we can explore options in the probe setting to monitor the service. Regards, Narender Verma Associate Consultant - HCL Nordea | Infrastructure - Security Mob: +91 8447000611 Manager: Nitin Garg E-mail: narender.verma(a)consult.nordea.com<mailto:narender.verma@consult.nordea.com> Planned Leave : 10,11 August 2021 Availibility: 8:00 AM to 5 PM CET, Team DL : dlcomSecurity_HCL(a)nordea.com<mailto:dlcomSecurity_HCL@nordea.com> Confidential From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> On Behalf Of Adam Armstrong via observium Sent: Friday, November 19, 2021 9:18 PM To: 'Observium' <observium(a)observium.org<mailto:observium@observium.org>> Cc: Adam Armstrong <adama(a)observium.org<mailto:adama@observium.org>> Subject: Re: [Observium] Issue in monitoring the API service of Checkpoint Multi Domain Management server. I have absolutely no idea what any of this is. Adam. From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> On Behalf Of SOC.HCL via observium Sent: 19 November 2021 08:16 To: observium(a)observium.org<mailto:observium@observium.org> Cc: SOC.HCL <SOC.HCL(a)nordea.com<mailto:SOC.HCL@nordea.com>>; Garg, Nitin <nitin.garg(a)consult.nordea.com<mailto:nitin.garg@consult.nordea.com>>; Verma, Narender <narender.verma(a)consult.nordea.com<mailto:narender.verma@consult.nordea.com>>; Sharma, Yogesh Kumar <yogesh.kumar.sharma(a)consult.nordea.com<mailto:yogesh.kumar.sharma@consult.nordea.com>> Subject: [Observium] Issue in monitoring the API service of Checkpoint Multi Domain Management server. Hi Team, This communication is for monitoring the API service of Checkpoint Multi Domain Management server. Current Setup: Observium: [cid:image003.png@01D7E2C9.2E8AC830] Checkpoint Multi Domain Management Server: Checkpoint R80.40 Take 120 . API Port Details : Port Details: ------------------- JETTY Internal Port: 50276 Please help to get the API service monitored by Observium. Regards, Narender Verma Associate Consultant - HCL Nordea | Infrastructure - Security Mob: +91 8447000611 Manager: Nitin Garg E-mail: narender.verma(a)consult.nordea.com<mailto:narender.verma@consult.nordea.com> Planned Leave : 10,11 August 2021 Availibility: 8:00 AM to 5 PM CET, Team DL : dlcomSecurity_HCL(a)nordea.com<mailto:dlcomSecurity_HCL@nordea.com> Confidential

1 0

Issue in monitoring the API service of Checkpoint Multi Domain Management server.
by SOC.HCL 24 Nov '21

24 Nov '21

Hi Team, This communication is for monitoring the API service of Checkpoint Multi Domain Management server. Current Setup: Observium: [cid:image001.png@01D7DD4B.C4F7F870] Checkpoint Multi Domain Management Server: Checkpoint R80.40 Take 120 . API Port Details : Port Details: ------------------- JETTY Internal Port: 50276 Please help to get the API service monitored by Observium. Regards, Narender Verma Associate Consultant - HCL Nordea | Infrastructure - Security Mob: +91 8447000611 Manager: Nitin Garg E-mail: narender.verma(a)consult.nordea.com Planned Leave : 10,11 August 2021 Availibility: 8:00 AM to 5 PM CET, Team DL : dlcomSecurity_HCL(a)nordea.com Confidential

2 2

Adding devices on a partitioned poller
by Lars Joergensen 22 Nov '21

22 Nov '21

Hi I have tried to add a device to a partitioned poller, but nothing happens. I can see it in the Poller Actions window, but it seems like it never gets picked up by the poller. Am I doing something wrong? [cid:image001.png@01D7DE04.8B385800] Lars ________________________________ Disclaimer: This e-mail, including any attachments, is for the intended recipient only. If you have received this e-mail by mistake please notify the sender immediately by return e-mail and delete this e-mail and any attachments, without opening the attachments, from your system. Access, disclosure, copying, distribution or reliance on any part of this e-mail by anyone else is prohibited. This e-mail is confidential and may be legally privileged. Chr. Hansen does not represent and/or warrant that the information sent and/or received by or with this e-mail is correct and does not accept any liability for damages related thereto. https://www.chr-hansen.com/en/legal-notice

5 4

Best SNMP configuration for CISCO switch and router
by Sébastien 65 20 Nov '21

20 Nov '21

Hello list, What is the best SNMP configuration to use to feed back information from switch (Catalyst) and router (ASR) ? I use the following configuration on my equipment but I wonder if there is not better (MIB) : snmp-server group READONLY v3 priv read MIB-2 snmp-server view MIB-2 iso included Thanks !

4 7

FW: Observium - disable vlan scanning
by Aravind R 19 Nov '21

19 Nov '21

Hi, We would like to use observium for our network monitoring purpose. Is there any option to disable monitoring vlans in switches? Best Regards, Aravind R Sr. Consultant [Facebook icon]<https://www.facebook.com/aravindnr81> [LinkedIn icon] <https://www.linkedin.com/in/aravindnr> [Twitter icon] <https://twitter.com/MyCompany404> [Youtube icon] <https://www.youtube.com/user/MyCompanyChannel> [Instagram icon] <https://www.instagram.com/mycompany404/> [Pinterest icon] <https://pinterest.com/mycompany404/> [Logo]<https://meliorasolutions.in/> T: 0484 - 238 8295 M: 8075455916 E: aravind(a)meliorasolutions.in<mailto:aravind@meliorasolutions.in> W: www.meliorasolutions.in<http://www.meliorasolutions.in/> Meliora Solutions LLP | No.6/858-M,2nd Floor, Suite No.212, | Valamkottil Towers, Kakkanad, Kochi, Kerala,

2 4

Unable to create web links to Watchdog monitors`
by Joe Brouillette 29 Oct '21

29 Oct '21

Good afternoon, I am trying to create a web page with links to our Watchdog environment monitors and not having any luck. I am using the same syntax I used with the Observium server I had last year and all I'm getting is a pink rectangle with No Auth at the top and the Date/Time indicators at the bottom. I can copy my links and put them in the address bar of my browser and the temperature graph pops right up. I did add the $config['allow_unauth_graphs'] = 0; line to my config.php file. I've been going over my settings and I can't figure this out. What am I doing wrong? I'm running Observium Professional 21.10.11678. Thanks, Joe Brouillette IT Specialist Link Transit 509.664.7643 jobee(a)linktransit.com<mailto:jobee@linktransit.com> "Any sufficiently advanced science looks like magic." - Arthur C. Clarke "All magic comes with a price." - Rumplestiltskin [Logo1]

2 6

ping only
by Toky ANDRIANASOLO 28 Oct '21

28 Oct '21

Hello, There are some devices that are not under our administration but need to be monitored by ping only (without snmp discovery) for reachability information, would it be possible please? Thank you and regards, Toky

4 3

Hosts showing with _gateway
by Brad Bendy 28 Oct '21

28 Oct '21

Hi, Ive been chasing this problem for hours and see what is going on, no clue why. I have a host that is in DNS and added to Observium, syslog is not being collected. Digging around more I also see a _gateway device in Observium (I have never added this). This device actually appears to be the one I am having issues with. I removed the device and readded, it polls the device once it looks then the rrds area created as _gateway and not the actual device name, so that's why the GUI is not showing anything I am guessing. In this install the gateway is the same firewall that I am trying to add that is showing up as _gateway. We have no _gateway anywhere in the config and nothing in the local hosts file or DNS. So I am a lost as to what is going on here. Has anyone seen this or have a clue what is going on?? Thanks

3 7

Dell OpenManage / Monitor
by ron＠rjr-services.com 27 Oct '21

27 Oct '21

Howdy Dev team, Was doing some digging into the /includes/mibs/dell.inc.php and found the section on $mib = 'MIB-Dell-10892'; $config['mibs'][$mib]['enable'] = 1; $config['mibs'][$mib]['identity_num'] = '.1.3.6.1.4.1.674.10892.1'; With a number of sub-items. As Dell have been releasing newer versions of OpenManage and Dell Command|Monitor, they have been migrating away from the 10892 mib, and are now using the 10909 mib. Just did a comparison walk on two different machines with different versions of OM agent, and have the following results: SNMPv2-SMI::enterprises.674.10892.1.300.10.1.9.1 = STRING: "Precision WorkStation T3500 " SNMPv2-SMI::enterprises.674.10909.1.300.10.1.9.1 = STRING: "Precision T7610" Of course the former machine doesn't have anything on 10909, and the latter has nothing on 10892. Sometime back, I pulled down MIB-Dell-10909 and dropped it into $OBSERVIUM_HOME/mibs/dell, but I haven't tried hacking on any of the php files anywhere... but it leads the question of whether it would be a "low-hanging fruit" type of change or if it would be something more substantial. Regards, Ron -- This message has been scanned by E.F.A. Project and is believed to be clean.

2 1

Best way to mass disable certain MIBs per device
by Brad Bendy 25 Oct '21

25 Oct '21

Hi, Easy way to do this? I have a ton of firewalls that support BGP but non running BGP and from the logs looks like that times out quite a bit, would like to just disable that. Is there a safe way to just do it in database and not break anything else? Thanks

2 1

Device first discovery date
by Attila Nagy 22 Oct '21

22 Oct '21

Hi Everyone! Is there a way to find out the date of the "first contact" with a device from Observium? I mean for example the date when the first discovery was run on a specific device, or something like this? (Currently the device's event log runs out after half a year.) Any ideas? Regards, Tylla

3 4

Certificate error
by Fred Sharpsteen 22 Oct '21

22 Oct '21

I have a school I was working with the other day and they were getting certified errors when trying to get the latest community edition. We were able to download it with wget --no-check-certificate is this normal?

2 1

Observium-Netflow
by Toky ANDRIANASOLO 21 Oct '21

21 Oct '21

Hello, Is observium able to integrate Netflow? Thank you and Regards, --

2 1

User AD integration
by Toky ANDRIANASOLO 19 Oct '21

19 Oct '21

Hello, Can we please integrate user Observium with users in Active Directory/ LDAP Thank you and Regards, Toky

3 4

Map alerts
by Fred Sharpsteen 19 Oct '21

19 Oct '21

Is there a setting to make all the red alerts appear on the map as the top Icon sometimes, a place with multiple devices, the Red Alert Icon shows up under the green ones?

2 1

Search is only showing ethernet ports not devices.
by Mark Rowlands 15 Oct '21

15 Oct '21

Observium 21.10.11667 (13th October 2021) OS Linux 5.4.0-86-generic [amd64] (Ubuntu 20.04) Apache 2.4.41 (Ubuntu) PHP 7.4.3 (OPcache: ENABLED) (Memory: 128MB) Python 3.8.10 MySQL 8.0.26-0ubuntu0.20.04.2 (extension: mysqli 7.4.3) SNMP NET-SNMP 5.8 RRDtool 1.7.2 (rrdcached 1.7.2: unix:/var/run/rrdcached.sock) Fping 4.2 (IPv4 and IPv6) The search device page works. But the quick search is now only showing ethernet ports ☹

3 6

Port IfStatus is missing on associaction rule set
by Edvinas Kairys 14 Oct '21

14 Oct '21

Hello, Seems like Port IfStatus is missing. On older version checkers - i can type it by hand, but here i could not find it. [image: image.png]

3 3

Mysql binary log files full hd
by Jay Hanke 12 Oct '21

12 Oct '21

We've got a server running subscription observium and inadvertently had our mysql binary logging settings not optimized and filled the drive. Mysql won't start to run the recovery process due to the full drive. Server is only running observium. Is it safe to manually delete some of the old binlog files to get mysql to start and then run the cleanup in mysql or would I lose observium info? Thanks! Jay

2 2

Re: [Observium] contact regarding issues with Professional Subscription
by Adam Shaheraz (SE) 12 Oct '21

12 Oct '21

I have updated card details for wrong user account (account was inactive) which made charges for past 3 years from 2018-2019, 2019-2020, 2020-2021. Can you please let me know how these transactions can be reverted and update the user account we currently use. Regards, Adam Shaheraz -------- Original message -------- From: Adam Armstrong via observium <observium(a)observium.org> Date: 10/12/21 15:52 (GMT+05:00) To: 'Observium' <observium(a)observium.org> Cc: Adam Armstrong <adama(a)observium.org> Subject: Re: [Observium] contact regarding issues with Professional Subscription What is the issue? Thanks, Adam. From: observium <observium-bounces(a)observium.org> On Behalf Of Adam Shaheraz (SE) via observium Sent: 12 October 2021 11:50 To: observium(a)observium.org Cc: Adam Shaheraz (SE) <shaheraz_a(a)dhiraagu.com.mv> Subject: [Observium] contact regarding issues with Professional Subscription Hi, Is there an email contact regarding issue with Professional Subscription? Regards, Adam Shaheraz

1 0

contact regarding issues with Professional Subscription
by Adam Shaheraz (SE) 12 Oct '21

12 Oct '21

Hi, Is there an email contact regarding issue with Professional Subscription? Regards, Adam Shaheraz

2 1

Cert error on https://www.observium.org/
by Martin 07 Oct '21

07 Oct '21

It looks yesterday a wrong certificate has been loaded on the Observium website: Firefox does not trust this site because it uses a certificate that is not valid for www.observium.org. The certificate is only valid for observium.org. Error code: SSL_ERROR_BAD_CERT_DOMAIN Martin

3 3

Observium HA
by Toky ANDRIANASOLO 05 Oct '21

05 Oct '21

Hello, we just installed a new second observium on a separated server located in another site to ensure monitoring service high availability. these are set with two different IP and the primary server is supposed to do system and Mysql replication to the second server every day so that we always have a same data level on both. Could you please guide us on that? Thank you and Regards, Toky

4 7

Delete device's ports
by Toky ANDRIANASOLO 05 Oct '21

05 Oct '21

Hello, After adding one switch device for example, all ports are monitored, most of them are unused. Could you please help us on how to delete ports Thank you and Regards, Toky

2 1

Re: [Observium] Event log showing 'changed' entries every 5 minutes
by Adam Armstrong 04 Oct '21

04 Oct '21

Looks like a failed sql query, a debugged poll on this device would probably show why: ./poller.php -h <device_id> -d -r Adam. Sent from my iPhone > On 4 Oct 2021, at 15:15, Adam Armstrong <adama(a)observium.org> wrote: > > Looks like a failed sql query, a debugged poll on this device would probably show why: > > ./poller.php -h <device_id> -d -r > > Sent from my iPhone > >>> On 4 Oct 2021, at 15:13, Richard Kuhns via observium <observium(a)observium.org> wrote: >>> >> Hello, >> >> We're running Observerium Professional 21.10.11636. >> >> Every 5 minutes the same 'changed' entries show up in the event log (screenshot below). The device in question is a Cisco ASR9K. Browsing to the device's page it looks like the changes below aren't actually be applied (no serial number listed, hardware is generic). >> >> How can I go about fixing this? >> >> Thanks in advance! >> >> >> -- >> Richard Kuhns <rjk(a)wintek.com> >> Systems Administrator >> Wintek Powered by Tipmont >> >> Main: 765-742-8428 >> Direct: 765-269-8541 >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 3

Adding MIB
by Nick Her 04 Oct '21

04 Oct '21

Hello, I'm a system admin and I'm new to Observium. I've use other monitoring tools in the past, but deploying my own monitoring tool is all new to me. My plan is to test out the waters and possibly implement Observium to our corporate LAN/WAN consisting of approximately 250 devices. I've got 13 core devices responding and polling is working via SNMPv3. I'm getting a lot of useful data from my core switches. One important data I need is DHCP server information (mac address binding/IP address leases) from our HP switches. These core switches have multiple functions and one of those function is DHCP server. I need to be able to pull this DHCP server data and retain it for a period of time. Maybe send it to a syslog server. My problem is the MIB (HP-ICF-DHCPV4-SEVRER-MIB) is missing from my Observium install. I've been searching for a couple of hours and have not found a good starting point on how to add this MIB. I see that simply coping the MIB into the Observium install directory isn't the complete process. On your FAQ, the answer to "Vendor specific MIB" was very vague and was not very helpful. Can someone give me a brief run down of what I need to do to get this MIB working? What resources to read for more understanding of the MIB process. I'm sure someone's asked this question before, sorry if I'm repeating the question. Thank You,Nick

2 1

Event log showing 'changed' entries every 5 minutes
by Richard Kuhns 04 Oct '21

04 Oct '21

Hello, We're running Observerium Professional 21.10.11636. Every 5 minutes the same 'changed' entries show up in the event log (screenshot below). The device in question is a Cisco ASR9K. Browsing to the device's page it looks like the changes below aren't actually be applied (no serial number listed, hardware is generic). How can I go about fixing this? Thanks in advance! -- Richard Kuhns <rjk(a)wintek.com> Systems Administrator Wintek Powered by Tipmont Main: 765-742-8428 Direct: 765-269-8541

1 0

Problems with Checkpoint Gaia interface naming
by Hofer, Elmar (BITBW) 04 Oct '21

04 Oct '21

Dear List-Users, maybe someone can help me with my problem as it seems to happen quite often. Checkpoint uses different names in the ifDescr and ifNames field. The correct interface names are in the ifNames field. Now Observium uses the ifDescr field to display the interface names, because normally both fields have the same conntent. I'm lokking for an option to change this behaviar. It would be great to get an hint where to look for this problem to resolve. Thanks for your help. Yours Elmar

2 5

New Community Edition 21.10 Release
by adama＠observium.org 02 Oct '21

02 Oct '21

We've released Community Edition 21.10. Includes 903 commits and a very large number of changes. Upgrade using our docs: https://docs.observium.org/updating/#upgrade-to-latest-major-release Requirements: PHP7.1, MySQL 5.6.5/MariaDB 10.0, RRDTool 1.6. Raw changelog at https://www.observium.org/svn.log

1 0

load new mibs
by Luis Olavarrieta 01 Oct '21

01 Oct '21

Guys, how do I load mibs not listed in the /mibs folder? We have a project where we will be monitoring IP camaras, and I can see that dahua is listed there, but not the ones we will be using. I requested the info to the manufacturer and they just sent the OID definition in an excel and they will be sending the mibs file later Please advice Thanks!

2 1

Change password to the client area page
by Daniel Johansson 29 Sep '21

29 Sep '21

Hi How do you change the password for the client area on observium.org? Are there any function for that I can use myself or does this need to be done centrally? ---- Regards Daniel

1 0

unending disk space growth?
by Adam Thompson 27 Sep '21

27 Sep '21

Since we last rebuilt our Observium instance in late 2019, we've noticed that it's chewing up disk space at a prodigious rate, that we didn't see before. We're seeing a steady ~300BG/month increase in storage needs. Observium, of course, monitors itself, and the line on the storage graph is a nearly-perfect slope (after adjusting for disk size increases). This came to my attention this morning (again), when we ran out of disk space (again) and I had to expand the volume (again) to continue operating. (So much for our alerting... oops.) We have added a few new devices, but not 1TB worth, and not consistently and constantly since late 2019. Since RRD files are - in theory - fixed-size, why does /opt/obvservium/rrd keep growing without bound? And how can I predict future growth? Will it ever stop? Help? Anyone? -Adam Adam Thompson Consultant, Infrastructure Services [1593169877849] 100 - 135 Innovation Drive Winnipeg, MB, R3T 6A8 (204) 977-6824 or 1-800-430-6404 (MB only) athompson(a)merlin.mb.ca<mailto:athompson@merlin.mb.ca> www.merlin.mb.ca<http://www.merlin.mb.ca/>

5 5

Re: [Observium] Ubuntu network issue
by Lyndon Labuschagne 26 Sep '21

26 Sep '21

Hi This is an Ubuntu configuration issue not an Observium one, You would be better off checking some Ubuntu support communities for an answer to your question. From: observium <observium-bounces(a)observium.org> on behalf of "Almutawa, Abdulrhman F via observium" <observium(a)observium.org> Reply to: Observium <observium(a)observium.org> Date: Sunday, 26 September 2021 at 06:49 To: Observium <observium(a)observium.org>, observium <observium-bounces(a)observium.org>, Adam Armstrong <adama(a)observium.org> Cc: "Almutawa, Abdulrhman F" <abdulrhman.almutawa(a)aramco.com> Subject: Re: [Observium] Ubuntu network issue Classification: Saudi Aramco: Company General Use This is a kind reminder please! Please support me to resolve the below issue. Best regards This email has been classified as Saudi Aramco: Company General Use on 9/26/2021 7:48 AM From: Almutawa, Abdulrhman F Sent: Tuesday, September 21, 2021 2:19 PM To: Observium <observium(a)observium.org> Subject: FW: Ubuntu network issue Classification: Saudi Aramco: Company General Use Hello Observium, Can you please support me with the below request? Best regards Almutawa, Abdulrahman F.Industrial Computer Engineer III CRDD, Engineering DivisionTechnical Support Unit Tel. +966 11 285 6371Mobile: +966504560668KKIA - Bldg. 500Riyadh This email has been classified as Saudi Aramco: Company General Use on 9/21/2021 2:19 PM From: Almutawa, Abdulrhman F Sent: Tuesday, September 21, 2021 9:48 AM To: 'observium' <observium-bounces(a)observium.org> Subject: Ubuntu network issue Classification: Saudi Aramco: Company General Use Greeting Observium, I am facing issue with my ubuntu machine that could not connect to 2 networks(subnet). In the network settings, it allow me to configure only one (1) network and deactivating the other network. Could you please share with me the workaround steps that can I follow to resolve this issue? Best regards Almutawa, Abdulrahman F.Industrial Computer Engineer III CRDD, Engineering DivisionTechnical Support Unit Tel. +966 11 285 6371Mobile: +966504560668KKIA - Bldg. 500Riyadh This email has been classified as Saudi Aramco: Company General Use on 9/21/2021 9:48 AM The contents of this email, including all related responses, files and attachments transmitted with it (collectively referred to as “this Email”), are intended solely for the use of the individual/entity to whom/which they are addressed, and may contain confidential and/or legally privileged information. This Email may not be disclosed or forwarded to anyone else without authorization from the originator of this Email. If you have received this Email in error, please notify the sender immediately and delete all copies from your system. Please note that the views or opinions presented in this Email are those of the author and may not necessarily represent those of Saudi Aramco. The recipient should check this Email and any attachments for the presence of any viruses. Saudi Aramco accepts no liability for any damage caused by any virus/error transmitted by this Email. For more information about Saudi Aramco’s corporate profile, please visit http://saudiaramco.com. للمزيد من المعلومات عن ملف الشركة الخاص بأرامكو السعودية، يرجى زيارة http://www.saudiaramco.com. _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Re: [Observium] Ubuntu network issue
by Almutawa, Abdulrhman F 26 Sep '21

26 Sep '21

Classification: Saudi Aramco: Company General Use This is a kind reminder please! Please support me to resolve the below issue. Best regards This email has been classified as Saudi Aramco: Company General Use on 9/26/2021 7:48 AM From: Almutawa, Abdulrhman F Sent: Tuesday, September 21, 2021 2:19 PM To: Observium <observium(a)observium.org> Subject: FW: Ubuntu network issue Classification: Saudi Aramco: Company General Use Hello Observium, Can you please support me with the below request? Best regards Almutawa, Abdulrahman F. Industrial Computer Engineer III [cid:CDDFFC45.png] CRDD, Engineering Division Technical Support Unit Tel. +966 11 285 6371 Mobile: +966504560668 KKIA - Bldg. 500 Riyadh This email has been classified as Saudi Aramco: Company General Use on 9/21/2021 2:19 PM From: Almutawa, Abdulrhman F Sent: Tuesday, September 21, 2021 9:48 AM To: 'observium' <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> Subject: Ubuntu network issue Classification: Saudi Aramco: Company General Use Greeting Observium, I am facing issue with my ubuntu machine that could not connect to 2 networks(subnet). In the network settings, it allow me to configure only one (1) network and deactivating the other network. Could you please share with me the workaround steps that can I follow to resolve this issue? Best regards Almutawa, Abdulrahman F. Industrial Computer Engineer III [cid:CDDFFC45.png] CRDD, Engineering Division Technical Support Unit Tel. +966 11 285 6371 Mobile: +966504560668 KKIA - Bldg. 500 Riyadh This email has been classified as Saudi Aramco: Company General Use on 9/21/2021 9:48 AM ________________________________ The contents of this email, including all related responses, files and attachments transmitted with it (collectively referred to as "this Email"), are intended solely for the use of the individual/entity to whom/which they are addressed, and may contain confidential and/or legally privileged information. This Email may not be disclosed or forwarded to anyone else without authorization from the originator of this Email. If you have received this Email in error, please notify the sender immediately and delete all copies from your system. Please note that the views or opinions presented in this Email are those of the author and may not necessarily represent those of Saudi Aramco. The recipient should check this Email and any attachments for the presence of any viruses. Saudi Aramco accepts no liability for any damage caused by any virus/error transmitted by this Email. For more information about Saudi Aramco's corporate profile, please visit http://saudiaramco.com. ?????? ?? ????????? ?? ??? ?????? ????? ??????? ????????? ???? ????? http://www.saudiaramco.com.

1 0

AUTO: Andrea Mastrangelo is out of the office (restituzione di Ven 15/10/2021)
by A.Mastrangelo＠ads.it 24 Sep '21

24 Sep '21

Sono fuori dall'ufficio da Ven 24/09/2021 fino a Ven 15/10/2021. scrivere in copia a wanclienti(a)ads.it Nota: Questa è una risposta automatizzata al messaggio "[Observium] unending disk space growth?" inviata il 24/09/2021 17:20:45. Questa è l'unica notifica che verrà ricevuta mentre la persona è assente. Questa e-mail ed i suoi allegati sono ad uso esclusivo di coloro ai quali è indirizzata e potrebbe contenere informazioni riservate, la cui diffusione, copia e/o distribuzione è proibita. Qualora riceveste questo messaggio per errore, scusandoci per l'accaduto, Vi preghiamo di avvertirci immediatamente, distruggendo quanto ricevuto. -- Messaggio analizzato da Libraesva ESG.

1 0

Changes to alarm checkers
by Daniel Johansson 23 Sep '21

23 Sep '21

Hi I see that some changes has been done to how you build the alarm checkers since a while back. Before you had to type everything out to match everything, devices, entitys and association,conditions. Now some of the things we have matched for and has worked no longer works. Also there are some stuff that I could match for before but not any londer. for example in a few cisco devices I run som links with macsec and I want to verify that the encryption is running and send an alert if not. This I can not do any more. see picture for the data I want to use: How can I still use this in observium 21.9.11575 (stable) ? ---- Regards Daniel

1 0

OpticalChannel no longer ignored
by Robert Williams 23 Sep '21

23 Sep '21

Hi! Overnight during the svn up to 11597 we have gained a couple of hundred 'ports' which are on various SmartOptics chassis (DCP and M series) of type "Optical Channel" There was already an exclusion for this type of interface (as the data polled is null anyway, even for 'Up' channels) but it now seems to be ignoring the exclusion and showing a couple of hundred extra (Down) ports now. The current config.php exclusions I've tried are: $config['bad_if_regexp'][] = "/opticalChannel/"; $config['bad_if'][] = "opticalChannel"; $config['bad_iftype'][] = "opticalChannel"; With no luck, although it is correctly importing them into the config, for example: Any ideas please? Cheers! Robert Williams Custodian Data Centres https://www.CustodianDC.com

2 3

Re: [Observium] Ubuntu network issue
by Almutawa, Abdulrhman F 22 Sep '21

22 Sep '21

Classification: Saudi Aramco: Company General Use This is a kind reminder. Thank you Almutawa, Abdulrahman F. Industrial Computer Engineer III [cid:CDDFFC45.png] CRDD, Engineering Division Technical Support Unit Tel. +966 11 285 6371 Mobile: +966504560668 KKIA - Bldg. 500 Riyadh This email has been classified as Saudi Aramco: Company General Use on 9/22/2021 2:09 PM From: Almutawa, Abdulrhman F Sent: Tuesday, September 21, 2021 2:19 PM To: 'Observium' <observium(a)observium.org> Subject: FW: Ubuntu network issue Classification: Saudi Aramco: Company General Use Hello Observium, Can you please support me with the below request? Best regards Almutawa, Abdulrahman F. Industrial Computer Engineer III [cid:CDDFFC45.png] CRDD, Engineering Division Technical Support Unit Tel. +966 11 285 6371 Mobile: +966504560668 KKIA - Bldg. 500 Riyadh This email has been classified as Saudi Aramco: Company General Use on 9/21/2021 2:19 PM From: Almutawa, Abdulrhman F Sent: Tuesday, September 21, 2021 9:48 AM To: 'observium' <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> Subject: Ubuntu network issue Classification: Saudi Aramco: Company General Use Greeting Observium, I am facing issue with my ubuntu machine that could not connect to 2 networks(subnet). In the network settings, it allow me to configure only one (1) network and deactivating the other network. Could you please share with me the workaround steps that can I follow to resolve this issue? Best regards Almutawa, Abdulrahman F. Industrial Computer Engineer III [cid:CDDFFC45.png] CRDD, Engineering Division Technical Support Unit Tel. +966 11 285 6371 Mobile: +966504560668 KKIA - Bldg. 500 Riyadh This email has been classified as Saudi Aramco: Company General Use on 9/21/2021 9:48 AM ________________________________ The contents of this email, including all related responses, files and attachments transmitted with it (collectively referred to as "this Email"), are intended solely for the use of the individual/entity to whom/which they are addressed, and may contain confidential and/or legally privileged information. This Email may not be disclosed or forwarded to anyone else without authorization from the originator of this Email. If you have received this Email in error, please notify the sender immediately and delete all copies from your system. Please note that the views or opinions presented in this Email are those of the author and may not necessarily represent those of Saudi Aramco. The recipient should check this Email and any attachments for the presence of any viruses. Saudi Aramco accepts no liability for any damage caused by any virus/error transmitted by this Email. For more information about Saudi Aramco's corporate profile, please visit http://saudiaramco.com. ?????? ?? ????????? ?? ??? ?????? ????? ??????? ????????? ???? ????? http://www.saudiaramco.com.

1 0

Location Not Showing
by Njoroge, Joyce (Stadt Ulm) 21 Sep '21

21 Sep '21

Hallo, the snmp location configuration in the Cisco switches are separated by a comma. But in Observium, the comma is changed to 1%F, which I assume is the reason for the error. When I change the location menu type in the web UI to geocoded, it works okay but not for nested location despite setting the Nested Location split character to a comma . -----Ursprüngliche Nachricht----- Von: observium <observium-bounces(a)observium.org> Im Auftrag von observium-request(a)observium.org Gesendet: Mittwoch, 15. September 2021 13:00 An: observium(a)observium.org Betreff: observium Digest, Vol 134, Issue 13 Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Re: Device Location (Adam Armstrong) 2. Test email (Almutawa, Abdulrhman F) ---------------------------------------------------------------------- Message: 1 Date: Tue, 14 Sep 2021 15:21:44 +0100 From: Adam Armstrong <adama(a)observium.org> To: Observium <observium(a)observium.org> Subject: Re: [Observium] Device Location Message-ID: <D335C349-7312-429F-BDF2-282680132D13(a)observium.org> Content-Type: text/plain; charset="utf-8" Looks like there’s some fussiness going on there with special characters and escaping. Is there supposed to be a comma where it puts the %1F? Adam. Sent from my iPhone > On 14 Sep 2021, at 11:08, Njoroge, Joyce (Stadt Ulm) via observium <observium(a)observium.org> wrote: > > > Hallo, > > I have added SNMP devices in groups (Country, City, Address). However, when I filter a specific device using locations (e.g. Locations -> Country -> City -> Address), then I get the message that 'No devices found Please try adjusting your search parameters' (seen in attached photo). What could be the problem? > > > > Thanks. > > Regards > Jay > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://postman.memetic.org/pipermail/observium/attachments/20210914/d5a1029…> -------------- next part -------------- A non-text attachment was scrubbed... Name: Picture (Device Independent Bitmap) 1.jpg Type: image/jpeg Size: 39390 bytes Desc: not available URL: <http://postman.memetic.org/pipermail/observium/attachments/20210914/d5a1029…> ------------------------------ Message: 2 Date: Wed, 15 Sep 2021 04:28:06 +0000 From: "Almutawa, Abdulrhman F" <abdulrhman.almutawa(a)aramco.com> To: Observium <observium(a)observium.org> Subject: [Observium] Test email Message-ID: <20210915042812.AE42328673(a)postman.memetic.org> Content-Type: text/plain; charset="utf-8" Classification: Saudi Aramco: Company General Use This email for test only. This email has been classified as Saudi Aramco: Company General Use on 9/15/2021 7:28 AM ________________________________ The contents of this email, including all related responses, files and attachments transmitted with it (collectively referred to as "this Email"), are intended solely for the use of the individual/entity to whom/which they are addressed, and may contain confidential and/or legally privileged information. This Email may not be disclosed or forwarded to anyone else without authorization from the originator of this Email. If you have received this Email in error, please notify the sender immediately and delete all copies from your system. Please note that the views or opinions presented in this Email are those of the author and may not necessarily represent those of Saudi Aramco. The recipient should check this Email and any attachments for the presence of any viruses. Saudi Aramco accepts no liability for any damage caused by any virus/error transmitted by this Email. For more information about Saudi Aramco's corporate profile, please visit http://saudiaramco.com. ?????? ?? ????????? ?? ??? ?????? ????? ??????? ????????? ???? ????? http://www.saudiaramco.com. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://postman.memetic.org/pipermail/observium/attachments/20210915/d671ffa…> ------------------------------ Subject: Digest Footer _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium ------------------------------ End of observium Digest, Vol 134, Issue 13 ******************************************

2 1

FW: Ubuntu network issue
by Almutawa, Abdulrhman F 21 Sep '21

21 Sep '21

Classification: Saudi Aramco: Company General Use Hello Observium, Can you please support me with the below request? Best regards Almutawa, Abdulrahman F. Industrial Computer Engineer III [cid:CDDFFC45.png] CRDD, Engineering Division Technical Support Unit Tel. +966 11 285 6371 Mobile: +966504560668 KKIA - Bldg. 500 Riyadh This email has been classified as Saudi Aramco: Company General Use on 9/21/2021 2:19 PM From: Almutawa, Abdulrhman F Sent: Tuesday, September 21, 2021 9:48 AM To: 'observium' <observium-bounces(a)observium.org> Subject: Ubuntu network issue Classification: Saudi Aramco: Company General Use Greeting Observium, I am facing issue with my ubuntu machine that could not connect to 2 networks(subnet). In the network settings, it allow me to configure only one (1) network and deactivating the other network. Could you please share with me the workaround steps that can I follow to resolve this issue? Best regards Almutawa, Abdulrahman F. Industrial Computer Engineer III [cid:CDDFFC45.png] CRDD, Engineering Division Technical Support Unit Tel. +966 11 285 6371 Mobile: +966504560668 KKIA - Bldg. 500 Riyadh This email has been classified as Saudi Aramco: Company General Use on 9/21/2021 9:48 AM ________________________________ The contents of this email, including all related responses, files and attachments transmitted with it (collectively referred to as "this Email"), are intended solely for the use of the individual/entity to whom/which they are addressed, and may contain confidential and/or legally privileged information. This Email may not be disclosed or forwarded to anyone else without authorization from the originator of this Email. If you have received this Email in error, please notify the sender immediately and delete all copies from your system. Please note that the views or opinions presented in this Email are those of the author and may not necessarily represent those of Saudi Aramco. The recipient should check this Email and any attachments for the presence of any viruses. Saudi Aramco accepts no liability for any damage caused by any virus/error transmitted by this Email. For more information about Saudi Aramco's corporate profile, please visit http://saudiaramco.com. ?????? ?? ????????? ?? ??? ?????? ????? ??????? ????????? ???? ????? http://www.saudiaramco.com.

1 0

Feature Request: Reoccurring Scheduled Maintenance
by Luis Londoño 20 Sep '21

20 Sep '21

We have a reoccurring monthly scheduled maintenance window. It would be much easier to schedule that in Observium with reoccurring schedules then doing it for every month

1 0

MySQL/MariaDB monitoring
by Joelly, Alexander 17 Sep '21

17 Sep '21

The MySQL App graphs on my Observium host only graphing the MySQL System & Queries but nothing for innoDB except the InnoDB Log Is the anything additionally to set to get the other graphs working as well? running the mysql query script locally gives following output: <<<mysql>>> a0:8 a1:4 a2:0 a3:0 a4:-1 a5:-1 a6:-1 a7:-1 a8:-1 a9:-1 aa:-1 ab:-1 ac:-1 ad:-1 ae:-1 af:-1 ag:-1 ah:-1 ai:-1 aj:-1 ak:-1 al:-1 am:-1 an:-1 ao:-1 ap:-1 aq:-1 ar:-1 as:-1 at:-1 au:-1 av:-1 aw:-1 ax:-1 ay:-1 az:-1 b0:-1 b1:-1 b2:-1 b3:-1 b4:0 b5:19 b6:0 b7:25 b8:284 b9:291 ba:2000 bb:32768 bc:2000 bd:0 be:3 bf:194 bg:0 bh:61 bi:133 bj:194 bk:7 bl:8192 bm:256 bn:44136 bo:-1 bp:-1 bq:0 br:-1 bs:0 bt:2247 bu:7249176 bv:931561 bw:1703944 bx:494047 by:99150 bz:5422 c0:13171 c1:16777216 c2:5988535 c3:2979656 c4:98399 c5:2734348 c6:43840 c7:0 c8:0 c9:0 ca:0 cb:0 cc:0 cd:35 ce:0 cf:19345 cg:0 ch:83601 ci:0 cj:49873 ck:538619 cl:694 cm:49775 cn:350 co:5 cp:12001694929 cq:1592734939 cr:16777216 cs:-1 ct:-1 cu:-1 cv:-1 cw:32768 cx:0 cy:0 cz:-1 d0:-1 d1:-1 d2:-1 d3:-1 d4:-1 d5:-1 d6:1 d7:-1 d8:-1 d9:-1 da:-1 db:-1 dc:-1 dd:-1 de:-1 df:-1 dg:-1 dh:-1 di:4836614 dj:124200 dk:0 dl:0 dm:1745 dn:7100602 do:83835892 dp:1394 dq:1697321 dr:77390433 ds:0 dt:0 du:0 dv:3953279 dw:1118301 dx:-1 dy:-1 dz:-1 e0:-1 e1:-1 e2:-1 e3:-1 e4:-1 e5:-1 e6:-1 e7:-1 e8:-1 e9:-1 ea:-1 eb:-1 ec:-1 ed:-1 ee:-1 ef:-1 eg:0 eh:24486912 ei:134217728 ej:12453 ek:2840 thx, Alex

2 2

Observium server redundancy
by Toky ANDRIANASOLO 17 Sep '21

17 Sep '21

Hello, As we need observium service continuity 24/7 can we install another observium in another server with different IP so that if the running one goes down we make the backup on live? in this case, what about the license (SVN user/password for Observium Enterprise) Thank you and Regards, Toky,

2 2

Is anyone using Observium to monitor Calix E7 GPON hardware?
by Richard Kuhns 15 Sep '21

15 Sep '21

Hello, We're in the processing of deploying a number of Calix E7 shelves and we'd really like to be able to monitor them using Observium. The problem is that a fairly full shelf can take a very long time (well over 5 mintues) to discover/poll. Our major concern is to be able to look at the uplink ports & the physical PON ports. More info would be nice, but it's not as important. If anyone is using Observium to monitor these devices and would be willing to share how you're doing it we'd greatly appreciate it. Thanks! -- Richard Kuhns <rjk(a)wintek.com> Systems Administrator Wintek Powered by Tipmont Main: 765-742-8428 Direct: 765-269-8541

1 0

Test email
by Almutawa, Abdulrhman F 15 Sep '21

15 Sep '21

Classification: Saudi Aramco: Company General Use This email for test only. This email has been classified as Saudi Aramco: Company General Use on 9/15/2021 7:28 AM ________________________________ The contents of this email, including all related responses, files and attachments transmitted with it (collectively referred to as "this Email"), are intended solely for the use of the individual/entity to whom/which they are addressed, and may contain confidential and/or legally privileged information. This Email may not be disclosed or forwarded to anyone else without authorization from the originator of this Email. If you have received this Email in error, please notify the sender immediately and delete all copies from your system. Please note that the views or opinions presented in this Email are those of the author and may not necessarily represent those of Saudi Aramco. The recipient should check this Email and any attachments for the presence of any viruses. Saudi Aramco accepts no liability for any damage caused by any virus/error transmitted by this Email. For more information about Saudi Aramco's corporate profile, please visit http://saudiaramco.com. ?????? ?? ????????? ?? ??? ?????? ????? ??????? ????????? ???? ????? http://www.saudiaramco.com.

1 0

Device Location
by Njoroge, Joyce (Stadt Ulm) 14 Sep '21

14 Sep '21

Hallo, I have added SNMP devices in groups (Country, City, Address). However, when I filter a specific device using locations (e.g. Locations -> Country -> City -> Address), then I get the message that 'No devices found Please try adjusting your search parameters' (seen in attached photo). What could be the problem? Thanks. Regards Jay

2 1

SSO and observium HA
by Toky ANDRIANASOLO 13 Sep '21

13 Sep '21

Hello, Still have some questions please, - Can we use SSO (Single Sign-on) on observium? - Is there a possibility to have 02 observium working as High Availability? so that if the main one is down the secondary take the relay Thank you and Regards, -- *Toky*

2 1

observium_map
by Toky ANDRIANASOLO 13 Sep '21

13 Sep '21

Hello, Being a new observium user, my requests follow one another. could you please help us on how to create observium map, Is it possible to set map dependency (click on global map and then redirected to detailed submap and so one) Thank you and Regards, Toky --

3 3

secure http access
by Toky ANDRIANASOLO 09 Sep '21

09 Sep '21

Hello, Could you please show us how to change http for https for the web access Thank you and Regards -- Toky

2 5

no graph shown for all sensors
by Toky ANDRIANASOLO 09 Sep '21

09 Sep '21

Hello, We can install the observium on debian 11 thanks to your support on my other request. For test, I added just 01 switch DELL, device well added using snmpV2 but* there is no graph shown on all sensors* (port, cpu, memory...) your support please, Thank you and Regards -- toky

3 10

Possibly Alert filter bug?
by Laszlo Nemeth 08 Sep '21

08 Sep '21

Hello We have some Check Point firewalls and if i make an Alert check to their memory usage and try to associate it to these firewalls, after the SAVE CHANGES the check doesn't shows any associated items even if i set the hostname directly or use the exact hardware type of it like the attached pictures. If i add the "Device Vendor in Check Point" it shows our other Check Point-made firewall but not that is in the attached picture (where the hardware is 15600 or the hostname is **fw01 . Is it a bug or just i made a mistake? Thanks Laszlo

3 3

10H Enterprise-grade support
by Toky ANDRIANASOLO 08 Sep '21

08 Sep '21

Could you please guide us on how to get into the Enterprise-grade support 10H after purchasing Observium enterprise lincense We really need closer support or troubleshoot on live if possible Thank you and Regards -- *Toky*

2 1

migrate from a Community Edition to a Professional edition - offline
by Daniel Marecki 08 Sep '21

08 Sep '21

Hello. I've a local network not connected to the internet. I'm currently using CE edition. How can I migrate from a CE to a PRO edition offline? Thank you for your answer. Best regards. Daniel

2 3

Re: [Observium] [EXTERNAL] Re: SNMPV3 Unreachable
by Almutawa, Abdulrhman F 07 Sep '21

07 Sep '21

Classification: Saudi Aramco: Company General Use This is a kind reminder, What I’m looking for are the steps to communicate via SNMPv3 from Observium. The endpoint’s already configured to enable the SNMPv3 Best regards Almutawa, Abdulrahman F. Industrial Computer Engineer III [cid:CDDFFC45.png] CRDD, Engineering Division Technical Support Unit Tel. +966 11 285 6371 Mobile: +966504560668 KKIA - Bldg. 500 Riyadh This email has been classified as Saudi Aramco: Company General Use on 9/6/2021 9:09 AM From: Almutawa, Abdulrhman F Sent: Sunday, September 5, 2021 7:38 AM To: 'Observium' <observium(a)observium.org> Cc: Adam Armstrong <adama(a)observium.org> Subject: RE: [EXTERNAL] Re: [Observium] SNMPV3 Unreachable Classification: Saudi Aramco: Company General Use Thank you for your response! Would you please provide the procedure to follow the steps to enable SNMPV3. Thank you Almutawa, Abdulrahman F. Industrial Computer Engineer III [cid:CDDFFC45.png] CRDD, Engineering Division Technical Support Unit Tel. +966 11 285 6371 Mobile: +966504560668 KKIA - Bldg. 500 Riyadh From: observium <observium-bounces(a)observium.org<mailto:observium-bounces@observium.org>> On Behalf Of Adam Armstrong via observium Sent: Thursday, September 2, 2021 2:13 PM To: Observium <observium(a)observium.org<mailto:observium@observium.org>> Cc: Adam Armstrong <adama(a)observium.org<mailto:adama@observium.org>> Subject: [EXTERNAL] Re: [Observium] SNMPV3 Unreachable PHISHING ALERT This email has been sent from outside Saudi Aramco. Be aware that this could be a phishing attempt. Report this message to spam(a)aramco.com<mailto:spam@aramco.com> if the email contains any suspicious content. Hi, SNMPv3 is more complex than SNMPv2 and requires all of the configuration parameters to match. If you're having trouble making SNMPv3 work to a particular type of device, you should try to make it work properly from the commandline using snmpwalk first. We can't really give a great deal of help for end devices beyond auth and encryption configuration on both Observium and the end device needing to match. adam. Sent from Mailspring<https://getmailspring.com/>, the best free email app for work On Sep 2 2021, at 11:55 am, Almutawa, Abdulrhman F via observium <observium(a)observium.org<mailto:observium@observium.org>> wrote: Classification: Saudi Aramco: Company General Use Hello Observium team, I enabled SNMPV3 in my HP switch, but the Observium shows me error in the verification process and unable to add this device! Can you please support? Best regards This email has been classified as Saudi Aramco: Company General Use on 9/2/2021 1:55 PM The contents of this email, including all related responses, files and attachments transmitted with it (collectively referred to as “this Email”), are intended solely for the use of the individual/entity to whom/which they are addressed, and may contain confidential and/or legally privileged information. This Email may not be disclosed or forwarded to anyone else without authorization from the originator of this Email. If you have received this Email in error, please notify the sender immediately and delete all copies from your system. Please note that the views or opinions presented in this Email are those of the author and may not necessarily represent those of Saudi Aramco. The recipient should check this Email and any attachments for the presence of any viruses. Saudi Aramco accepts no liability for any damage caused by any virus/error transmitted by this Email. For more information about Saudi Aramco’s corporate profile, please visit http://saudiaramco.com. للمزيد من المعلومات عن ملف الشركة الخاص بأرامكو السعودية، يرجى زيارة http://www.saudiaramco.com. _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium This email has been classified as Saudi Aramco: Company General Use on 9/5/2021 7:38 AM

4 3

SNMPV3 Unreachable
by Almutawa, Abdulrhman F 05 Sep '21

05 Sep '21

Classification: Saudi Aramco: Company General Use Hello Observium team, I enabled SNMPV3 in my HP switch, but the Observium shows me error in the verification process and unable to add this device! Can you please support? Best regards This email has been classified as Saudi Aramco: Company General Use on 9/2/2021 1:55 PM ________________________________ The contents of this email, including all related responses, files and attachments transmitted with it (collectively referred to as "this Email"), are intended solely for the use of the individual/entity to whom/which they are addressed, and may contain confidential and/or legally privileged information. This Email may not be disclosed or forwarded to anyone else without authorization from the originator of this Email. If you have received this Email in error, please notify the sender immediately and delete all copies from your system. Please note that the views or opinions presented in this Email are those of the author and may not necessarily represent those of Saudi Aramco. The recipient should check this Email and any attachments for the presence of any viruses. Saudi Aramco accepts no liability for any damage caused by any virus/error transmitted by this Email. For more information about Saudi Aramco's corporate profile, please visit http://saudiaramco.com. ?????? ?? ????????? ?? ??? ?????? ????? ??????? ????????? ???? ????? http://www.saudiaramco.com.

2 2

observium enterprise doesnt word after installation
by Toky ANDRIANASOLO 03 Sep '21

03 Sep '21

We just had 1 year of subscription license observium Enterprise, ref: 4011610 We are completely new on this monitoring tools and really need your support for the installation. Our standard is debian 11, and we proceed on the manual installation as the script on the observim document doesn’t work (script automatic installation for debian 10) All the package are installed, observium seems to be installed following the guide (SNV username/password inserted) but *when we access the observium via GUI, the apache default page is shown instead of observium page* We already remove the apache (2.4) and then reinstalled and configure but the same result. Could you please help us on that or redirect me on the right support as we are turning around on this issue for a few weeks Thank you -- *Toky *

2 3

Observium SSL expired
by Simon Smith 02 Sep '21

02 Sep '21

Hi All, Just wondered if everybody else was having issues with the observium website? My browser keeps saying SSL expired - 27/07/2021 Regards Simon

2 2

API - request for "probes" endpoint
by Serghei Golipad 02 Sep '21

02 Sep '21

Hi team, Would it be possible to expose "probes" endpoint (hostname/device_id) to get response either raw or structured e.g ping loss/current rta/availability? Thank you. Serghei Golipad Cloud Services - Network Architect CCIE R&S ® #45033 Phone : 0203 069 5165 | Mobile: 07469 081 910 | Email: s.golipad(a)uk.cdw.com<mailto:s.golipad@uk.cdw.com> [cid:24fdda78-2c64-4752-a17c-7c93e956f55b] PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 1 New Change, London, EC4M 9AF. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence.>/p> For more information about CDW please visit https://www.uk.cdw.com

1 0

Alerting on bandwidth usage as part of 95th billing External
by Gavin Henry 02 Sep '21

02 Sep '21

Hi all, A customer of ours has had a bill shock today and we'd like to set up an alert if they go over their allowed CDR / 95th % over a few days or so or every 10 days or something. Is this possible? Thanks, Gavin.

3 5

Probes from remote collectors
by Brad Bendy 27 Aug '21

27 Aug '21

Hi, I have added probes under a hosts that is a remote collector (ICMP for now) but I don't see that hosts actually sending the data. The master observium is doing the checks not the hosts the probe is tied to. When I go add probe I am choosing the other remote collector hosts and it shows up under that hosts when I go look at the hosts but those checks are still originating from the wrong place. I guess the "hosts" refers to which hosts would be used as the default %HOSTNAME% variable? If so, is there any way we can get these checks to launch from the collector and send data back? Thanks

2 2

Remove decommissioned poller
by Lars Joergensen 24 Aug '21

24 Aug '21

Hi list We have removed a poller in our partitioned poller setup, but it still appears in the list of selectable pollers for devices. What's the recommended way of removing it? We're not afraid of changes directly in the database. Lars ________________________________ Disclaimer: This e-mail, including any attachments, is for the intended recipient only. If you have received this e-mail by mistake please notify the sender immediately by return e-mail and delete this e-mail and any attachments, without opening the attachments, from your system. Access, disclosure, copying, distribution or reliance on any part of this e-mail by anyone else is prohibited. This e-mail is confidential and may be legally privileged. Chr. Hansen does not represent and/or warrant that the information sent and/or received by or with this e-mail is correct and does not accept any liability for damages related thereto. https://www.chr-hansen.com/en/legal-notice

2 1

Debian 11
by Eric Sigurdsson 23 Aug '21

23 Aug '21

Hello! Does the automated install script works with Debian 11-systems? ES

2 1

Monitor ISP link down.
by Nishanth Abraham 23 Aug '21

23 Aug '21

Hello, The ISP internet link is terminated on a Cisco router/firewall. I would like to monitor the availability of internet service with a ping response from the link public IP. How can achieve this? Thanks, Nishanth

1 0

monitor specific ports
by Luis Olavarrieta 19 Aug '21

19 Aug '21

Hey guys, i am trying to monitor two things in a port, if is operational up with “ ifOperStatus notequals up” but if I set it up to all my switches, it sends 2221 (literally) emails regarding all the ports available in my networks. How can I specify certain ports in certain devices. The other one is to be able to see if there is “traffic”, the scenario is we have a several mikrotik devices connected to DSL modems, but we need to see if the DSL service is up and running and get a notification if this port / service goes down. Regards, Luis

2 1

monitor specific ports
by Luis Olavarrieta 18 Aug '21

18 Aug '21

Hey guys, i am trying to monitor two things in a port, if is operational up with “ ifOperStatus notequals up” but if I set it up to all my switches, it sends 2221 (literally) emails regarding all the ports available in my networks. How can I specify certain ports in certain devices. The other one is to be able to see if there is “traffic”, the scenario is we have a several mikrotik devices connected to DSL modems, but we need to see if the DSL service is up and running and get a notification if this port / service goes down. Regards,

2 1

Panduit Smartzone PDU support request
by Laszlo Nemeth 18 Aug '21

18 Aug '21

Hello, We have a lot of Panduit SmartZone G5 iPDU devices but as i see the Observium not fully supported it. We can see only the basic parameters (uptime, name etc) but not the outlet's usage and another PDU related things. I found the MIB file in the PDU's firmware update: https://www.panduit.com/en/support/download-center/power-distribution-units… and the current version is: G5 PDU Firmware 3.x, the link is: https://www.panduit.com/content/dam/panduit/en/support/download-center-asse… If You need any output from the current PDU device, please drop a mail. Thanks! Br Laszlo

1 0

CO2 Monitoring With Observium?
by Storer, Darren 13 Aug '21

13 Aug '21

Hi, Has anyone got any recommendations for in-building CO2 environmental monitor systems that are already working well with Observium? (long-term stats/alarms etc.) Many thanks Darren

1 1

Monitoring Ping-only devices
by Lars Joergensen 10 Aug '21

10 Aug '21

Hi We're loving Observium and are trying to expand it into our manufacturing network. Problem is, many of the devices located there only support ping. Is there any way to add them to Observium? Best regards Lars Joergensen IT Manager - Network Team - Global IT Chr. Hansen A/S - Boege Alle 10-12 - 2970 Hoersholm - Denmark Phone: +45 52 18 05 22 dklarj(a)chr-hansen.com<mailto:dklarj@chr-hansen.com> - www.chr-hansen.com<http://www.chr-hansen.com/> [cid:image001.gif@01D78DDD.E64B91C0] ________________________________ Disclaimer: This e-mail, including any attachments, is for the intended recipient only. If you have received this e-mail by mistake please notify the sender immediately by return e-mail and delete this e-mail and any attachments, without opening the attachments, from your system. Access, disclosure, copying, distribution or reliance on any part of this e-mail by anyone else is prohibited. This e-mail is confidential and may be legally privileged. Chr. Hansen does not represent and/or warrant that the information sent and/or received by or with this e-mail is correct and does not accept any liability for damages related thereto. https://www.chr-hansen.com/en/legal-notice

2 2

MSSQL database size
by Rando Sui 09 Aug '21

09 Aug '21

Hello, I would like to monitor MSSQL database size, how to do that? Has anybody done this? Greetings, Rando.

1 0

Empty alert check page
by Laszlo Nemeth 09 Aug '21

09 Aug '21

Hello After i upgraded to 11518 (from a 106XX) the Alerts check page is empty. I attached a picture about it. Looks like sometime some page can generate (so example after i press a rebuild or check any category like Devices or Storages sometimes (1 from 10 times) i got the list and all alert listed on the left side, but offen the page is just empty. Looks like every other things working, just the Alert check page is empty. Br Laszlo

2 2

VMware Hypervisor Check/Alert
by Scott Driemeier-Showers 05 Aug '21

05 Aug '21

Is anyone successfully monitoring their VMware Hypervisors to generate an alert when a host enters/exits maintenance mode? Would you be willing to share tips/tricks? I don't see any conditions in the logs when this happens that would provide a trigger... Thanks, Scott

2 1

JunOS Fusion and satellite
by Johann Mallet 31 Jul '21

31 Jul '21

Hello, We migrate one part of our equipments to JunOS Fusion Provider Edge. That permits us to have one Juniper MX chassis with a satellite (like Juniper EX or QFX) which is seen as like a linecard of Juniper MX chassis. But I have the impression that Observium can't detect sensors, COS or hardware for ports on this satellite. On CLI, we need to add the keyword "satellite" in commands to see optical level, hardware list. Maybe for satellite mode, the SNMP MIB was different (FPC number for satellite starts at 100). But, I have only found documentation for the "hardware" part. https://www.juniper.net/documentation/us/en/software/junos/fusion-enterpris… I can share access to our lab equipment with JunOS Fusion if needed. Best Regards, Johann

2 1

after upgrade i cannot login using chrome
by Edvinas Kairys 29 Jul '21

29 Jul '21

Hello, after todays update to 21.7.11497 (stable) i cannot enter the observium using my correct credentials. Even when cookies cleared or incognito mode is used. On the Authlog i see Authentifcation failure. >From browsers like FireFox i can enter. It's very strange. Any idea ?

2 2

Workaround for vlan Permission
by Tibi, Saleh 29 Jul '21

29 Jul '21

Hi guys, i am wondering if there is a way to give Permission to a specific user to see all vlan I mean the following path: https://domainnam.com/vlan/, without giving a global Read I tried throw Group Permissions but the issue is, that I cant collect all vlan in a group, because vlan is not an Eintitiy in Obserivum. Is there any workaround ? Mit freundlichen Grüßen Saleh Tibi --------------------------------------------- Ing: Saleh Tibi (Herr) IT-Spezialist für Maschinensäle und Überwachung Zentrum für Informations- und Medientechnologie (ZIM)|Raum 25.41.02.27 Heinrich-Heine-Universitaet Duesseldorf Universitaetsstrasse 1, 40225 Duesseldorf Email: <mailto:saleh.tibi@hhu.de> saleh.tibi(a)hhu.de Phone: +49-(0)211-81-14051 Vor Ort: Montag, Dienstag und Freitag

1 0

User permissions (same thing with alerts)
by Brad Bendy 27 Jul '21

27 Jul '21

Am I missing something when adding users? Do you have to add each device to a user? Is there anyway to just allow all devices? The issue we are having is each time we add devices we have to login and modify the users everytime we add devices, which you can imagine is a nightmare. Thanks

2 1

host_id in pollers table
by Brad Bendy 27 Jul '21

27 Jul '21

Hi, We have a image we have been deploying at remote sites for the poller. This was a clone and added a new site and running into issues. Looking at the poller table I see the hostid in not different across some of the hosts, assuming his because we cloned the image. What is this hostid referenced from? We made new SSH keys on each host but there must be something else this from and not really sure how to change it. Thanks

2 2

Acknowledgments to alerts
by Lars Joergensen 26 Jul '21

26 Jul '21

Hi all We're really pleased with Observium, and are actually looking to using it as the main network monitoring tool. What we miss is a way to add a comment when you acknowledge an alert. Something along the lines of "stuff is acting up again. John is looking at it. Trouble ticket XX1234." Is this something that is being considered? Lars ________________________________ Disclaimer: This e-mail, including any attachments, is for the intended recipient only. If you have received this e-mail by mistake please notify the sender immediately by return e-mail and delete this e-mail and any attachments, without opening the attachments, from your system. Access, disclosure, copying, distribution or reliance on any part of this e-mail by anyone else is prohibited. This e-mail is confidential and may be legally privileged. Chr. Hansen does not represent and/or warrant that the information sent and/or received by or with this e-mail is correct and does not accept any liability for damages related thereto. https://www.chr-hansen.com/en/legal-notice

1 0

Change default sensor thresholds?
by Lars Joergensen 25 Jul '21

25 Jul '21

Hi It seems many of our Aruba SFP's have TX power set about the threshold defined for them somewhere in Observium. Rather than changing all of them manually, I would like to do a global change for these. Is that possible? Lars ________________________________ Disclaimer: This e-mail, including any attachments, is for the intended recipient only. If you have received this e-mail by mistake please notify the sender immediately by return e-mail and delete this e-mail and any attachments, without opening the attachments, from your system. Access, disclosure, copying, distribution or reliance on any part of this e-mail by anyone else is prohibited. This e-mail is confidential and may be legally privileged. Chr. Hansen does not represent and/or warrant that the information sent and/or received by or with this e-mail is correct and does not accept any liability for damages related thereto. https://www.chr-hansen.com/en/legal-notice

1 0

Re: [Observium] observium Digest, Vol 132, Issue 11
by Njoroge, Joyce (Stadt Ulm) 22 Jul '21

22 Jul '21

Hallo, Thanks for your answer. I am very new to Observium and would like to know how to get to the command line of the Observium host. Regards, Joyce -----Ursprüngliche Nachricht----- Von: observium <observium-bounces(a)observium.org> Im Auftrag von observium-request(a)observium.org Gesendet: Donnerstag, 15. Juli 2021 13:00 An: observium(a)observium.org Betreff: observium Digest, Vol 132, Issue 11 Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Problem Adding New Device (Njoroge, Joyce (Stadt Ulm)) 2. Re: Problem Adding New Device (Ahmed Rahal) 3. Re: Problem Adding New Device (Adam Armstrong) ---------------------------------------------------------------------- Message: 1 Date: Wed, 14 Jul 2021 14:39:35 +0000 From: "Njoroge, Joyce (Stadt Ulm)" <J.Njoroge(a)ulm.de> To: "observium(a)observium.org" <observium(a)observium.org> Subject: [Observium] Problem Adding New Device Message-ID: <59e016f19ffa485da62f2760e8d554c8(a)sus-ex-01-wp.stadtulm.de> Content-Type: text/plain; charset="utf-8" Hallo, I am having a problem adding a few of my devices to the Observium Server. I use the same parameters for the other devices but with the few that couldn't be added, I am getting the following message. [cid:image001.png@01D778CD.53F2F860] I have tried to change SNMP authentication using different protocol versions but I still get an error message. [cid:image002.png@01D778CE.B3F939D0] [cid:image003.png@01D778CE.D3F95D50] Obsevium version is Observium CE 20.9.10731. I will appreciate your help. Regards, Joyce -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://postman.memetic.org/pipermail/observium/attachments/20210714/672568e…> -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.png Type: image/png Size: 23978 bytes Desc: image001.png URL: <http://postman.memetic.org/pipermail/observium/attachments/20210714/672568e…> -------------- next part -------------- A non-text attachment was scrubbed... Name: image002.png Type: image/png Size: 21902 bytes Desc: image002.png URL: <http://postman.memetic.org/pipermail/observium/attachments/20210714/672568e…> -------------- next part -------------- A non-text attachment was scrubbed... Name: image003.png Type: image/png Size: 21113 bytes Desc: image003.png URL: <http://postman.memetic.org/pipermail/observium/attachments/20210714/672568e…> ------------------------------ Message: 2 Date: Wed, 14 Jul 2021 12:05:55 -0400 From: Ahmed Rahal <arahal(a)fibrenoire.ca> To: Observium <observium(a)observium.org> Subject: Re: [Observium] Problem Adding New Device Message-ID: <CAHaNNBULsv0gxYZrN3PPXpLowEdYuWEPUbvcH3aurs_-t0jEMw(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Hi Joyce, Try debugging on the command line from the Observium host: snmpwalk -v2c -c <your_snmpv2_community> 172.30.2.21 This should pull a lot of text. If this command does not succeed, make sure you can reach your target on port 161/udp (check your firewalls). If snmpwalk returns content, try adding the node through the command line: /opt/observium/add_device.php 172.30.2.21 <your_snmpv2_community> That will likely tell you what's wrong. HTH, Ahmed. Le mer. 14 juill. 2021, à 10 h 39, Njoroge, Joyce (Stadt Ulm) via observium <observium(a)observium.org> a écrit : > Hallo, > > > > I am having a problem adding a few of my devices to the Observium Server. > I use the same parameters for the other devices but with the few that > couldn't be added, I am getting the following message. > > > > > > I have tried to change SNMP authentication using different protocol > versions but I still get an error message. > > > > > > > > Obsevium version is Observium CE 20.9.10731. > > > > I will appreciate your help. > > > > Regards, > > Joyce > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > -- Ahmed Rahal Administrateur de Systèmes / Systems Administrator *Fibrenoire* - www.fibrenoire.ca A: 550 , avenue Beaumont, bureau 320, Montréal (Québec) H3N 1V1 arahal(a)fibrenoire.ca Twitter: @fibrenoire -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://postman.memetic.org/pipermail/observium/attachments/20210714/4a81156…> -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.png Type: image/png Size: 23978 bytes Desc: not available URL: <http://postman.memetic.org/pipermail/observium/attachments/20210714/4a81156…> -------------- next part -------------- A non-text attachment was scrubbed... Name: image002.png Type: image/png Size: 21902 bytes Desc: not available URL: <http://postman.memetic.org/pipermail/observium/attachments/20210714/4a81156…> -------------- next part -------------- A non-text attachment was scrubbed... Name: image003.png Type: image/png Size: 21113 bytes Desc: not available URL: <http://postman.memetic.org/pipermail/observium/attachments/20210714/4a81156…> ------------------------------ Message: 3 Date: Wed, 14 Jul 2021 17:08:35 +0100 From: Adam Armstrong <adama(a)observium.org> To: Observium <observium(a)observium.org> Subject: Re: [Observium] Problem Adding New Device Message-ID: <6B77A19F-AB64-4F85-9821-E366D51E2AB5(a)getmailspring.com> Content-Type: text/plain; charset="utf-8" Better to just fetch sysObjectID.0 or sysDescr.0 instead of a walk to start with. snmpget -v2c -c <community> 172.30.2.21 sysDescr.0 Using v3 auth on commandline is messy, I'd recommend making it work with v2c if you don't understand the complexities. adam. On Jul 14 2021, at 5:05 pm, Ahmed Rahal via observium <observium(a)observium.org> wrote: > Hi Joyce, > > Try debugging on the command line from the Observium host: > snmpwalk -v2c -c <your_snmpv2_community> 172.30.2.21 > > This should pull a lot of text. > If this command does not succeed, make sure you can reach your target on port 161/udp (check your firewalls). > > > If snmpwalk returns content, try adding the node through the command line: > /opt/observium/add_device.php 172.30.2.21 <your_snmpv2_community> > > > That will likely tell you what's wrong. > > HTH, > > Ahmed. > Le mer. 14 juill. 2021, à 10 h 39, Njoroge, Joyce (Stadt Ulm) via observium <observium(a)observium.org (mailto:observium@observium.org)> a écrit : > > Hallo, > > > > > > I am having a problem adding a few of my devices to the Observium Server. I use the same parameters for the other devices but with the few that couldn't be added, I am getting the following message. > > > > > > > > > > I have tried to change SNMP authentication using different protocol versions but I still get an error message. > > > > > > > > > > > > > > > > Obsevium version is Observium CE 20.9.10731. > > > > I will appreciate your help. > > > > Regards, > > Joyce > > _______________________________________________ > > observium mailing list > > observium(a)observium.org (mailto:observium@observium.org) > > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > > > -- > Ahmed Rahal > > Administrateur de Systèmes / Systems Administrator > > Fibrenoire - www.fibrenoire.ca (http://www.fibrenoire.ca/) > A: 550 > , avenue > Beaumont, > bureau > 320, > Montréal (Québec) > H3N 1V1 > > arahal(a)fibrenoire.ca (mailto:arahal@fibrenoire.ca) > Twitter: @fibrenoire > > > > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://postman.memetic.org/pipermail/observium/attachments/20210714/8665e09…> ------------------------------ Subject: Digest Footer _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium ------------------------------ End of observium Digest, Vol 132, Issue 11 ******************************************

2 1

Unable to poll a once working Device
by Oberreiter Andreas 20 Jul '21

20 Jul '21

Hi there, I have multiple environmental Devices which are working fine for years now. A view weeks ago one of was shown as unable to poll. A SNMPwalk for the Device works fine. I've tried to add the device via it's IP no luck there. I've rebooted the Server and the Device multiple times. I flushed the DNS cache. Attached are the debug Output of a poller run of a working Device poll_tempboxnl.txt and of the non-working Device poll_tempboxnz.txt as well as the discovery and snmpwalk output. xxx_tempboxnl.txt working. xxx_tempboxnz.txt not working. Any suggestions are welcome. Best regards Andras

2 2

Problem Adding New Device
by Njoroge, Joyce (Stadt Ulm) 14 Jul '21

14 Jul '21

Hallo, I am having a problem adding a few of my devices to the Observium Server. I use the same parameters for the other devices but with the few that couldn't be added, I am getting the following message. [cid:image001.png@01D778CD.53F2F860] I have tried to change SNMP authentication using different protocol versions but I still get an error message. [cid:image002.png@01D778CE.B3F939D0] [cid:image003.png@01D778CE.D3F95D50] Obsevium version is Observium CE 20.9.10731. I will appreciate your help. Regards, Joyce

3 2

Re: [Observium] Invalid targets and datasource
by Mati 12 Jul '21

12 Jul '21

Dear All, I have been struggling getting PHP Weathermap working properly on Observium and would really appreciate your help.. I've noticed that the percentage values on the links is not working and the traffic load is continuously at 0.00%. We are currently using the following software versions.. *Observium* 21.5.11304 (6th May 2021) *OS* Linux 3.16.0-4-amd64 [amd64] (Debian 8) *Apache* 2.4.10 (Debian) *PHP* 5.6.38-0+deb8u1 (OPcache: ENABLED) (Memory: 128MB) *Python* 2.7.9 *MySQL* 5.5.60-0+deb8u1 (extension: mysqli 5.5.60) *SNMP* NET-SNMP 5.7.2.1 *RRDtool* 1.4.8 The results from map-poller.php are as follows: WARNING: configs//example.conf: OVERLIBGRAPH is used, but HTMLSTYLE is static. This is probably wrong. [WMWARN41] PHP Notice: Undefined index: uptime in /var/opt/observium/html/weathermap/lib/datasources/WeatherMapDataSource_observium.php on line 53 PHP Notice: Undefined index: uptime in /var/opt/observium/html/weathermap/lib/datasources/WeatherMapDataSource_observium.php on line 53 WARNING: configs//Core_062021.conf: ProcessTargets: LINK hex.asr9k-pe1, target: /opt/observium/rrd/hex.asr9k-pe1/port-415.rrd:INOCTETS:OUTOCTETS on config line 69 of configs//Core_062021.conf was not recognised as a valid TARGET [WMWARN08] Kind Regards MP

2 4

Unable to create Alert Checker
by David Milton 12 Jul '21

12 Jul '21

Hello, I'm having a strange problem creating alert checkers. I first noticed this today and updated to the latest edition: 21.7.11450. I'm working on a test server and was attempting to re-create all of the alert checkers currently on my production systems and then add a few more; I would like to monitor power supply input state as well as air intake temperatures and produce alerts when a power supply is "down" and when intake air temperatures go above something like 45C. This has been prompted by some problems lately where power redundancy was lost and where we had an air conditioner failure. An earlier warning than having the hardware go into thermal shutdown is very much needed. So on my test server I can go through the basic process of creating the alert checker; alert checks -> Create new checker. In this case I click BGP Peer, fill in the name, message, use 1 for the delay and the conditions: bgpPeerAdminStatus notequals stop bgpPeerState notequals established Unfortunately, when I click "Add Checker" nothing happens. I've verified this is not likely the browser or is something pretty universal to all of my browsers because I can duplicate this in current versions Firefox, Safari, Opera, and Chrome. Both Opera and Chrome are fresh installations done today but I did try disabling all extensions in Firefox and Safari to see if those were a problem. I searched through the documentation but couldn't find anything about browser compatibility or known conflicts. This used to work but it's been quite some time since I've wanted to add new checks. Is there something else I'm missing? Thanks, Dave.

2 4

Thermal Alarm Bug
by Joey Stanford 12 Jul '21

12 Jul '21

Hi Adam (et al), When Obs pulls in a sensor_value of NULL it gets interpreted as a zero and thus triggers alerts. Can we prevent that somehow? Joey > Begin forwarded message: > > From: "Observium" <observium(a)rmham.org> > Subject: ALERT: [radio-westcreek.devilshead.rmham] [sensor] [System] Thermal Alarm - Temperature out of threshold > Date: July 9, 2021 at 14:43:53 MDT > To: netops(a)rmham.org > > ALERT Modify <http://observium.rmham.org/device/device=182/tab=alert/alert_entry=23319/> > Alert Thermal Alarm - Temperature out of threshold > Entity System <http://observium.rmham.org/device/device=182/tab=health/metric=temperature/…> > Conditions sensor_value less -25 ("") > Metrics sensor_value = > Duration 5h 43s (2021-07-09 09:43:10) > Device > Device radio-westcreek.devilshead.rmham <http://observium.rmham.org/device/device=182/> > Hardware RB911-5HacD > Operating System Mikrotik RouterOS 6.47.10 (Level 3) > Location DevilsHead, [39.260394,-105.101844] > Uptime 7m 28s > sensor_graph > > <http://observium.rmham.org/graph.php?type=sensor_graph&id=3629> > > E-mail sent to: netops(a)rmham.org <mailto:netops@rmham.org> > E-mail sent at: Fri, 09 Jul 2021 14:43:53 -0600 > > -- > Observium Professional 21.7.11470 <https://www.observium.org/>

3 6

APCu Caching not working?
by Milton Ngan 08 Jul '21

08 Jul '21

I have noticed that when I enable webUI caching, that the page loads don’t speed up. It regularly takes 3 seconds to render a page, although the tool tip at the bottom shows APCu caching is enabled. However, if I force the cache driver to “files”, then I see a huge speed up (page loads drop to about 100-200ms). Is there some extra config to get APCu working correctly? I didn’t see anything in the docs, but I could have missed it.

5 7

(no subject)
by DerBeWie 08 Jul '21

08 Jul '21

3 4

Notification Transports
by Nelson Lopes 07 Jul '21

07 Jul '21

Wed like to add Pager Duty as a notification transport but I dont see it as an option in contact. Currently running Professional edition of Observium. Do we need an Enterprise edition. If not, what am I missing? Thanks in advance,

2 1

Distributed polling
by Milton Ngan 06 Jul '21

06 Jul '21

I was looking at the distributed polling feature as we have a geographically distributed network and polling slow devices from half way across the globe takes a long time. It turns out that putting a poller closer to the device doesn’t actually help. The SNMP polling times go down a bit, but the SQL times go up a lot because there are hundreds of SQL queries that get run for every polled device. This can easily add another 1-2 minutes to your polls depending on how many metrics are being polled. So, it seems to me that the distributed feature only works if the poller is still reasonably close to the database, otherwise the latency per query eats up any gains you might have from reducing the SNMP latency. Are there plans to try to reduce the number of queries a poller makes to make geographically distributed polling less latency sensitive? Cheers Milton

4 4

Alert on Entity Group
by Philipp Rehs 05 Jul '21

05 Jul '21

Hello, we want to create alert checkers for entities (mostly storage entities) which are only assigned to some entities in special groups. Building the groups is possible but it is not possible to add a association rule based on entitiy group membership. it is just possible to do it on device group membership or entity attributes. There is no entitiy / storage group option. Any idea how to solve this? Kind regards Philipp Rehs -- --------------------------- Zentrum für Informations- und Medientechnologie Kompetenzzentrum für wissenschaftliches Rechnen und Speichern Heinrich-Heine-Universität Düsseldorf Universitätsstr. 1 Raum 25.41.00.51 40225 Düsseldorf / Germany Tel: +49-211-81-15557

1 0

RANCID integration with Huawei CloudEngine
by Hernan Moguilevsky 02 Jul '21

02 Jul '21

Hi, This is not an Observium question really. But perhaps someone had the same issue. Did anyone managed to integrate RANCID with Huawei CloudEngine? I have no problem with Huawei S line. If someone solved it, please share. Thanks. Regards. -- /Hernan Moguilevsky/ Badajoz 45, piso 17 Las Condes | Santiago | CHILE *T* 56 22840 9984 (Ext 140) | *ASNs* 61522 / 61524 /61525 /61526 /61527 /64112

1 0

OSPF neighbor - Huawei
by henrique＠infovaletelecom.com.br 01 Jul '21

01 Jul '21

Good afternoon, Someone managed to monitor ospf neighbors using huawei 6730 device ?

2 1

alert checkers windows after migration to new server is blank
by Edvinas Kairys 30 Jun '21

30 Jun '21

Hello, After migration to new service, using mysql dump and then restore, on the new server i see alert checkers windows blank, even the page source displays the alerts. Any clues ? using Observium Subscriber edition. [image: image.png]

2 1

monitoring 3CX
by Luis Olavarrieta 28 Jun '21

28 Jun '21

Is anyone monitoring a 3CX server in linux? I am able to monitor the OS, but not the app as running Asterisk in other boxes. If you are able to do it, please advice on how to! Thanks!

1 0