- observium - lists.observium.org

Regarding Observium Services
by Ismail Hossain 11 Feb '20

11 Feb '20

Dear Observium, We are using your product and version is 17.9. we want to add our FTTH device on observium but it's not working fully for devices like V-SOL, Phyhome, BDcom. Could you please add a feature for FTTH Network. If this criteria match with us then we want to purchase your product soon. -- With Best Regards, *Md. Ismail Hossain* *Engineer | Technical* Earth Telecommunication Team Chittagong Mail : ismail.hossain(a)earth.net.bd <ismail.hossain(a)race.net.bd> <atick(a)race.net.bd> Cell : 01844543221 Cell : 01970423912 Chittagong Office : IIUC Tower, (13th floor) Sheikh Mujib Road Agrabad C/A, Chittagong - 4100, Bangladesh.

1 0

Blank space in graphs
by Ludovic Eluecque 10 Feb '20

10 Feb '20

Hello, on somes devices, i have a problem with blank space in my networking graph, i have this problem only with somes devices, others devices (same hardware and OS) work well. Please find attached examples. The devices are Cisco N3K-C3048TP-1GE running on NX-OS 6.0(2)U3(7) (uk9). On working device (with normal graph) all ports are 64bits, on devices with blank problem all ports are 32bits. When i poll a device with the blank problem, i have: o CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB cviRoutedVlanIfIndex o SMON-MIB o CISCO-TRUSTSEC-INTERFACE-MIB o ADSL-LINE-MIB o EtherLike-MIB dot3StatsDuplexStatus o Q-BRIDGE-MIB o IP-MIB IP-MIB ipIfStats *Negative ifOutOctets. Possible spike on next poll!* +-----------+--------+----------+--------+----------+----------+---------+----------+--------+---------+----+ | ifIndex | Label | Type | Speed | BPS In | BPS Out | Data In | Data Out | PPS In | PPS Out | HC | +-----------+--------+----------+--------+----------+----------+---------+----------+--------+---------+----+ | 83886080 | mgmt0 | Ethernet | 1Gbps | 59.1kbps | 55.9kbps | 252kB | 239kB | 66.5 | 66.5 | N | | 436207616 | Et1/1 | Ethernet | 1Gbps | 56.2kbps | 59.4kbps | 240kB | 254kB | 66.8 | 66.8 | N | | 436211712 | Et1/2 | Ethernet | 1Gbps | 23.2kbps | 27.2kbps | 99.1kB | 116kB | 27.2 | 18.8 | N | | 436215808 | Et1/3 | Ethernet | 1Gbps | 2.6Mbps | 1.68Mbps | 10.8MB | 7.01MB | 1.04k | 1.71k | N | | 436219904 | Et1/4 | Ethernet | 1Gbps | 260Mbps | 63.7Mbps | 1.06GB | 266MB | 23k | 12.6k | N | | 436224000 | Et1/5 | Ethernet | 1Gbps | 0bps | 114kbps | 0B | 489kB | 0 | 12.5 | N | | 436228096 | Et1/6 | Ethernet | 1Gbps | 117Mbps | 453Mbps | 490MB | 1.85GB | 14.6k | 39.9k | N | | 436232192 | Et1/7 | Ethernet | 1Gbps | 0bps | 0bps | 0B | 0B | 0 | 0 | N | | 436236288 | Et1/8 | Ethernet | 1Gbps | 8.76Mbps | 3.65Mbps | 36.5MB | 15.2MB | 828 | 592 | N | | 436240384 | Et1/9 | Ethernet | 1Gbps | 0bps | 0bps | 0B | 0B | 0 | 0 | N | | 436244480 | Et1/10 | Ethernet | 1Gbps | 24.3Mbps | 44.9Mbps | 101MB | 187MB | 3.09k | 4.55k | N | ..... | 436416512 | Et1/52 | Ethernet | 10Gbps | 38.7Mbps | 0bps | 161MB | *-1.9GB * | 116k | 73k | N | On working device, i don't have this negative values and the "HC" column has "Y" value, not "N". Do you have an idea about the problem? Thank! Regards. Ludovic. --

3 2

All ports down
by ira＠cylinder.tv 10 Feb '20

10 Feb '20

2 devices discovered No graphs work Config at pastebin.com/vTg8Ukep Thank you -- Sent from myMail for Android

4 5

Cleaning up Observium
by greggy862 . 06 Feb '20

06 Feb '20

Hello, I would like to cleanup observium, please see below that my largest directories are the logs (1.6 GB) and the rrd (17 GB). I tried cleaning up the logs by running ./housekeeping -sel BUT the size of the logs did not change - nonetheless, the devices with years of logs suddenly have days of logs (since I specified logs should be no older than 30 days). My concern is that I did the cleanup to reduce disk space, but immediately after I saw an increase in disk space, moreover, the space occupied in the log file directory did not change. Is it that observium housekeeping only targets space in the database, I ask because the query hanged for over 30 min doing nothing until I uses the -d (debug) flag and I noticed it was doing an sql query. How do I cleanup the logs directory? do I delete/truncate logs such as observium.log and access.log? What about the rrd directory, if I remove some of the rrds do I loose graphs (like record duration? LAB01:/opt/observium# du -h /opt/observium/ --max-depth=1 | sort -h 20K /opt/observium/templates 52K /opt/observium/probes 472K /opt/observium/attic 512K /opt/observium/scripts 1.3M /opt/observium/tests 1.8M /opt/observium/update 3.2M /opt/observium/libs 8.7M /opt/observium/includes 26M /opt/observium/html 630M /opt/observium/mibs 799M /opt/observium/.svn 2.3G /opt/observium/logs 17G /opt/observium/rrd 21G /opt/observium/ LAB01:/opt/observium# du -h /opt/observium/logs/* --max-depth=1 | sort -h 4.0K /opt/observium/logs/debug.log 12K /opt/observium/logs/cleanup.log 384K /opt/observium/logs/error_log 712K /opt/observium/logs/update-errors.log 1.3M /opt/observium/logs/housekeeping.log 20M /opt/observium/logs/db.log 707M /opt/observium/logs/access_log 1.6G /opt/observium/logs/observium.log Regards, Greg

1 0

Cisco 9300-24p in stack with 3 units not showing all info for stack member 2
by Daniel Johansson 06 Feb '20

06 Feb '20

Hi After setting up a new stack with 3 units of C9300-24p we only see the full inventory for switch 1 and switch 3 not switch 2. That means I can't see the fans or temp sensors for switch 2. Is this an observium parsing issue or an snmp issue in the switches? I attach a full picture of the inventory page. i also have a full snmpwalk dump from the switch if you need to have a look at it. Will send it outside of the list if needed. ---- Regards Daniel

3 3

unsubscribe
by Dose, Volker 04 Feb '20

04 Feb '20

Mit freundlichen Grüßen Volker Dose Volker Dose | IT-Infrastruktur ACO Severin Ahlmann GmbH & Co. KG Am Ahlmannkai | 24782 Büdelsdorf Tel.+49 4331 354-111 | Fax +49 4331 354-325 | Volker.Dose(a)aco.com<mailto:Volker.Dose@aco.com> www.aco.com<http://www.aco.com> [cid:image001.png@01D5DB77.BFA41390] Amtsgericht: Kiel, HRA 132 RD Komplementärin: Acoplast Kunststoff-Verarbeitung GmbH Amtsgericht: Kiel, HRB 131 RD USt-IdNr.: DE 135 372 264 Geschäftsführer: Hans-Julius Ahlmann, Iver Ahlmann, Søren W. Olsen, Thomas Bendixen [cid:image002.png@01D5DB77.BFA41390]<https://www.facebook.com/aco> [cid:image003.png@01D5DB77.BFA41390]<https://www.youtube.com/user/ACO> [cid:image004.png@01D5DB77.BFA41390]<https://www.linkedin.com/company/aco-group/> [cid:image005.png@01D5DB77.BFA41390]<https://www.instagram.com/aco_group> [cid:image006.png@01D5DB77.BFA41390]<https://www.pinterest.de/aco_group/> [cid:image007.png@01D5DB77.BFA41390]<https://twitter.com/aco_gruppe/>

1 0

LDAPS
by Quentin Beggs 04 Feb '20

04 Feb '20

Hey just wondering on the process for setting up LDAPS for authentication for Observium on Debian? We currently have LDAP working successfully but looking to move to LDAPS. I've changed the port and set starttls to true in the config file but I can't work out how/where to import the certificate? Quentin Beggs | Engineer 02 9970 2010 | 0420 361 760 Quentin.Beggs(a)netstrategy.net NetStrategy Pty Ltd | help(a)netstrategy.net Help Desk 1300-736-383 | netstrategy.net 165 Walker St, North Sydney NSW 2060

3 2

Feature Request - Interactive Graphs
by Justin Radke 04 Feb '20

04 Feb '20

Hello, I have been a user of Observium for quite some time and currently paid subscriber, I have always wanted to see interactive graphs to improve usability. What I am asking for specifically is the ability to: 1. Hover the mouse cursor over the graph and have it show pop-up boxes with info that show the current value for that vertex on the graph. 2. The ability to select a time window by clicking and dragging the cursor across the graph. This functionality is commonly seen on stock graphs such as finance.yahoo.com or finance.google.com where you can view values across the timeline and select time ranges by highlighting them on the graph with the mouse cursor. Is this a feature that can be added to Observium? Also, if this is not the appropriate method to issue feature requests please kindly direct me towards the proper method. Regards, -=JGR

8 9

Windows SNMP Timeout
by Luis Londoño 03 Feb '20

03 Feb '20

Hello, Is anyone else having any issues with SNMP timeouts on windows servers? I´ve checked the servers to make sure the port is open and it is listening, but whenever I either do the poller or I manually do the snmpwalk I get a timeout. Same thing if I run the snmpwalk from another server. I do get a ping response so I know they can communicate. I have 3 Windows 2012R2 servers that are having this issue, not sure if maybe it was a recent windows update. TIA

3 3

Re: [Observium] Supermicro: Voltage scale unreliabe
by Mike Stupalov 03 Feb '20

03 Feb '20

Ok, as I see in your output, all sensors with smHealthMonitorType equal to 1, everyone have smHealthMonitorReadingUnit equal to mV. And this mean our sensor definition still correct, not see reason for your changes. But I found 2 additional sensor classes (current type 7, unit mA) and (power type, unit mW). I will add it. smHealthMonitorType.22 = 1 smHealthMonitorType.23 = 1 smHealthMonitorType.24 = 1 smHealthMonitorType.25 = 1 smHealthMonitorType.26 = 1 smHealthMonitorType.27 = 1 smHealthMonitorType.28 = 1 smHealthMonitorType.29 = 1 smHealthMonitorType.30 = 1 smHealthMonitorType.31 = 1 smHealthMonitorType.32 = 1 smHealthMonitorType.33 = 1 .. smHealthMonitorType.42 = 1 smHealthMonitorType.43 = 1 .. smHealthMonitorType.52 = 1 smHealthMonitorType.53 = 1 smHealthMonitorReadingUnit.22 = "mV" smHealthMonitorReadingUnit.23 = "mV" smHealthMonitorReadingUnit.24 = "mV" smHealthMonitorReadingUnit.25 = "mV" smHealthMonitorReadingUnit.26 = "mV" smHealthMonitorReadingUnit.27 = "mV" smHealthMonitorReadingUnit.28 = "mV" smHealthMonitorReadingUnit.29 = "mV" smHealthMonitorReadingUnit.30 = "mV" smHealthMonitorReadingUnit.31 = "mV" smHealthMonitorReadingUnit.32 = "mV" smHealthMonitorReadingUnit.33 = "mV" .. smHealthMonitorReadingUnit.42 = "mV" smHealthMonitorReadingUnit.43 = "mV" .. smHealthMonitorReadingUnit.52 = "mV" smHealthMonitorReadingUnit.53 = "mV" Torstein Eide wrote on 03.02.2020 13:04: > Hi Mike > See attached file > > > man. 27. jan. 2020 kl. 19:21 skrev Mike Stupalov <mike(a)observium.org > <mailto:mike@observium.org>>: > > Hrm, > > please attach discovery debug for more understand, what your > device return in this MIB: > ./discovery.php -d -m sensors -h <device> > > Torstein Eide wrote on 27.01.2020 20:51: >> for voltage, the scale is in mV, (0.001), some times it would >> reset to 1. >> like this, for a 12V rail: >> image.png >> >> It is the fix "+ 'scale' => 0.001," that is >> important. >> since the "map_class" is more reliable then than the " 'mV' => >> 0.001,". >> >> man. 27. jan. 2020 kl. 18:33 skrev Mike Stupalov >> <mike(a)observium.org <mailto:mike@observium.org>>: >> >> Hi, >> >> please describe, what you mean as (voltage was unreliable)? >> >> as I see, you just added min (0) and max (250000), >> if your server return such values, we can exclude in same >> (single) definition. >> Both this values also impossible for fan speed and temperature. >> >> Torstein Eide via observium wrote on 24.01.2020 14:40: >>> Hi >>> >>> For me the scale read by the supermicro voltage was >>> unreliable, so i have change it to be 2 separately entries. >>> Index: includes/definitions/mibs/supermicro.inc.php >>> >>> =================================================================== >>> --- includes/definitions/mibs/supermicro.inc.php >>> (revision 10173) >>> +++ includes/definitions/mibs/supermicro.inc.php >>> (working copy) >>> @@ -29,6 +29,8 @@ >>> 'SUPERMICRO-HEALTH-MIB::smHealthMonitorName.1' => '/.+/' >>> ]; >>> >>> + >>> +// Tempeture and fanspeed >>> $config['mibs'][$mib]['sensor'][] = array( >>> 'table' => 'smHealthMonitorTable', >>> 'oid' => 'smHealthMonitorReading', >>> @@ -35,11 +37,12 @@ >>> 'oid_descr' => 'smHealthMonitorName', >>> 'descr_transform' => [ 'action' => 'ireplace', >>> 'from' => [ 'Temperature', 'Temp', 'Voltage', ' Fan >>> Speed', ' Speed' ], 'to' => '' ], >>> 'oid_class' => 'smHealthMonitorType', >>> - 'map_class' => [ 0 => 'fanspeed', 1 => >>> 'voltage', 2 => 'temperature' ], >>> + 'map_class' => [ 0 => 'fanspeed', 2 => >>> 'temperature' ], >>> // This table have unit oid smHealthMonitorDivisor, >>> but it always 0 >>> 'oid_scale' => 'smHealthMonitorReadingUnit', >>> 'map_scale' => [ 'C' => 1, 'mV' => 0.001, >>> 'RPM' => 1 ], >>> 'oid_num' => >>> '.1.3.6.1.4.1.10876.2.1.1.1.1.4', >>> + 'min' => 0, >>> 'limit_scale' => 'scale', // limits scale >>> same as main scale >>> 'oid_limit_high' => 'smHealthMonitorHighLimit', >>> 'oid_limit_low' => 'smHealthMonitorLowLimit', >>> @@ -47,6 +50,31 @@ >>> 'rename_rrd' => 'supermicro-%index%' >>> ); >>> >>> +// voltage >>> + >>> +$config['mibs'][$mib]['sensor'][] = array( >>> + 'table' => 'smHealthMonitorTable', >>> + 'oid' => 'smHealthMonitorReading', >>> + 'oid_descr' => 'smHealthMonitorName', >>> + 'descr_transform' => [ 'action' => 'ireplace', >>> 'from' => [ 'Temperature', 'Temp', 'Voltage', ' Fan >>> Speed', ' Speed' ], 'to' => '' ], >>> + 'oid_class' => 'smHealthMonitorType', >>> + 'map_class' => [ 1 => 'voltage' ], >>> + // This table have unit oid smHealthMonitorDivisor, >>> but it always 0 >>> + //'oid_scale' => 'smHealthMonitorReadingUnit', >>> + //'map_scale' => [ 'C' => 1, 'mV' => 0.001, >>> 'RPM' => 1 ], >>> + 'limit_scale' => 'scale', // limits scale >>> same as main scale >>> + 'scale' => 0.001, >>> + 'oid_num' => >>> '.1.3.6.1.4.1.10876.2.1.1.1.1.4', >>> + 'min' => 0, >>> + 'max' => 250000, >>> + 'oid_limit_high' => 'smHealthMonitorHighLimit', >>> + 'oid_limit_low' => 'smHealthMonitorLowLimit', >>> + 'test' => [ 'field' => >>> 'smHealthMonitorReadingUnit', 'operator' => 'notin', >>> 'value' => [ 'ThermalText', 'N/A' ] ], >>> + 'rename_rrd' => 'supermicro-%index%' >>> +); >>> >>> >>> This fix the problem i had with scale changing for voltage. >>> >>> -- >>> Torstein Eide >>> Torsteine(a)gmail.com <mailto:Torsteine@gmail.com> >>> >>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org <mailto:observium@observium.org> >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> -- >> Mike Stupalov >> Observium Limited, http://observium.org >> >> >> >> -- >> Torstein Eide >> Torsteine(a)gmail.com <mailto:Torsteine@gmail.com> > > -- > Mike Stupalov > Observium Limited, http://observium.org > > > > -- > Torstein Eide > Torsteine(a)gmail.com <mailto:Torsteine@gmail.com> -- Mike Stupalov Observium Limited, http://observium.org

1 0

Device need to be rediscovered
by Tomasz Karczewski 02 Feb '20

02 Feb '20

Hi, >From the last update i see many logs like "snmpEngineID changed: -> (probably the device was replaced). The device will be rediscovered" I rediscoverd manually all devices but i still see these logs. Tomasz Karczewski Administrator Sieci tkarczewski(a)man.olsztyn.pl http://www.man.olsztyn.pl http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie

4 6

Areca arrays
by cody＠mail-server.cc 01 Feb '20

01 Feb '20

The Areca controller is supported but only very basic infos are availaible as Areca doesn't provide much via SNMP. But there is a areca-hw script that uses the cli tool get the hardware infos out of it: CLI> hw info The Hardware Monitor Information ===================================================== [Controller H/W Monitor] CPU Temperature : 64 C Controller Temp. : 38 C CPU Fan : 8437 RPM 12V : 12.220 V 5V : 5.053 V 3.3V : 3.360 V IO Voltage +1.8V : 1.824 V DDR3 +1.5V : 1.536 V CPU VCore +1.0V : 1.040 V Analog +1.0V : 1.024 V DDR3 +0.75V : 0.752 V Battery Status : Not Installed [Enclosure#1 : SAS RAID Adapter V1.0] ===================================================== GuiErrMsg<0x00>: Success. Would it be possible to extend the areca-hw script to add volume and disk info to check if the volume is in Normal or Degraded state and if possible which disk is gone? CLI> vsf info # Name Raid Name Level Capacity Ch/Id/Lun State =============================================================================== 1 ARC-1882-VOL#000 Raid Set # 000 Raid1+0 480.1GB 00/00/00 Normal 2 ARC-1882-VOL#002 Raid Set # 002 Raid1+0 600.1GB 00/00/01 Normal 3 ARC-1882-VOL#003 Raid Set # 003 Raid1+0 2000.4GB 00/00/02 Normal =============================================================================== GuiErrMsg<0x00>: Success. CLI> disk info # Enc# Slot# ModelName Capacity Usage =============================================================================== 1 01 Slot#1 SAMSUNG MZ7KM480HAHP-0E005(SED 480.1GB Raid Set # 000 2 01 Slot#2 SAMSUNG MZ7KM480HAHP-0E005(SED 480.1GB Raid Set # 000 3 01 Slot#3 N.A. 0.0GB N.A. 4 01 Slot#4 N.A. 0.0GB N.A. 5 01 Slot#5 WDC WD6000HLHX-01JJPV0 600.1GB Raid Set # 002 6 01 Slot#6 WDC WD6000HLHX-01JJPV0 600.1GB Raid Set # 002 7 01 Slot#7 HGST HUS724020ALE640 2000.4GB Raid Set # 003 8 01 Slot#8 HGST HUS724020ALE640 2000.4GB Raid Set # 003 =============================================================================== GuiErrMsg<0x00>: Success. Thanks, Cody

1 0

Splunk integration
by davide.magni＠sorint.it 31 Jan '20

31 Jan '20

Hi all, I know that there are API in Observium for fetching devices status and data. Is there an integration/app/plugin for fetching this data into Splunk? Thanks! /* */ /*Davide Magni*/

1 0

Hardware inventory not updating
by Tomasz Karczewski 31 Jan '20

31 Jan '20

Hi, I noticed that my hardware inventory won't update in Observium pro version. How can i fix that? Tomasz Karczewski Administrator Sieci tkarczewski(a)man.olsztyn.pl http://www.man.olsztyn.pl http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie

1 0

Contact
by Melissa Stagg 29 Jan '20

29 Jan '20

Hello, Does anyone know how to request an invoice or speak to someone direct please? Melissa Stagg Sales Support Melissa.Stagg(a)Millgate.co.uk millgate.co.uk<https://millgate.co.uk> +44 (0) 114 242 9864 [cid:image001.jpg@01D5D68D.542DD400]<https://millgate.co.uk/> [cid:image002.jpg@01D5D68D.542DD400]<https://www.linkedin.com/company/millgateit> [cid:image003.jpg@01D5D68D.542DD400]<https://twitter.com/millgate_it> [cid:image004.jpg@01D5D68D.542DD400]<https://www.facebook.com/millgateit> Registered Head Office: 7 Vantage Drive, Sheffield, South Yorkshire, S9 1RG Millgate Ltd. is a company registered in England and Wales. Registered number: 03229619. The information transmitted is intended for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission or other use of, or taking of any action in reliance upon information by persons or entities other than the intended recipient is prohibited. This email should be scanned for virus infection before opening, Millgate Ltd accept no liability for loss or damage arising through the content of this message. The content of this message, or opinions expressed within, are not necessarily agreed with by the directors or shareholders of Millgate Ltd. No terms and conditions (either emailed or posted) will be accepted by Millgate Ltd unless signed by a director of the company. If you have received this e-mail in error, please contact the sender and delete the material from any computer.

2 1

Storage size changes
by Luis Londoño 29 Jan '20

29 Jan '20

Hello, On our NAS devices, there are multiple entries where the storage size changes to 0 and then changes back to its original number. Is this something that can be changed? Or anybody know why it is doing that? I´m wondering if that is going to cause an issue if I enable an alert checker for disk size changes.

3 2

Re: [Observium] NetApp Storage FAS2552 - Interface Speed Change
by Mike Stupalov 28 Jan '20

28 Jan '20

Hi Basile, please try with latest revision (r10249). Issue should gone ;) Basile Bluntschli wrote on 28.01.2020 09:35: > Hi Make > > please see attached files. > As you can see from the screenshot the interface names get filled > wrong. As far as I can see in the debug. It would display the correct > Interface but it gets truncated. > > Thanks > Basile > > > > Am Di., 28. Jan. 2020 um 00:09 Uhr schrieb Mike Stupalov > <mike(a)observium.org <mailto:mike@observium.org>>: > > Hi Basile, > > you sent discovery debug, but this issue need to see poller debug. > > Please make this debug: > ./poller.php -d -m ports -h <device> > > Tnx. > > Basile Bluntschli via observium wrote on 27.01.2020 23:57: >> just sent to you via private reply >> >> Thanks! >> >> Am Mo., 27. Jan. 2020 um 19:59 Uhr schrieb Tom Laermans via >> observium <observium(a)observium.org <mailto:observium@observium.org>>: >> >> Probably better to ignore the -1 and consider ifHighSpeeed >> unreliable on that device? >> >> Debug output for the poller would definitely help! >> >> On 1/26/2020 6:44 PM, Adam Armstrong via observium wrote: >>> Is it always the same message? >>> >>> If so, I guess that database field can't contain -1 value. >>> >>> We can modify the schema for that, but it'd be useful to >>> know where the -1 is coming from. >>> >>> Adam. >>> >>> Sent from BlueMail <http://www.bluemail.me/r?b=15774> >>> On 26 Jan 2020, at 15:23, Basile Bluntschli via observium >>> <observium(a)observium.org <mailto:observium@observium.org>> >>> wrote: >>> >>> Hi All >>> >>> on our NetApp FAS2552 every polling interval the >>> interface speed changes: >>> Interface changed: [ifHighSpeed] '0' -> '-1' >>> >>> This happens at all polling intervals... >>> >>> Would a debug output help? >>> >>> Thanks >>> Basile >>> >>> >>> ------------------------------------------------------------------------ >>> >>> observium mailing list >>> observium(a)observium.org <mailto:observium@observium.org> >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> >>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org <mailto:observium@observium.org> >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org <mailto:observium@observium.org> >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org <mailto:observium@observium.org> >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > -- > Mike Stupalov > Observium Limited, http://observium.org > -- Mike Stupalov Observium Limited, http://observium.org

2 1

NetApp Storage FAS2552 - Interface Speed Change
by Basile Bluntschli 27 Jan '20

27 Jan '20

Hi All on our NetApp FAS2552 every polling interval the interface speed changes: Interface changed: [ifHighSpeed] '0' -> '-1' This happens at all polling intervals... Would a debug output help? Thanks Basile

4 4

Supermicro: Voltage scale unreliabe
by Torstein Eide 27 Jan '20

27 Jan '20

Hi For me the scale read by the supermicro voltage was unreliable, so i have change it to be 2 separately entries. Index: includes/definitions/mibs/supermicro.inc.php > =================================================================== > --- includes/definitions/mibs/supermicro.inc.php (revision 10173) > +++ includes/definitions/mibs/supermicro.inc.php (working copy) > @@ -29,6 +29,8 @@ > 'SUPERMICRO-HEALTH-MIB::smHealthMonitorName.1' => '/.+/' > ]; > > + > +// Tempeture and fanspeed > $config['mibs'][$mib]['sensor'][] = array( > 'table' => 'smHealthMonitorTable', > 'oid' => 'smHealthMonitorReading', > @@ -35,11 +37,12 @@ > 'oid_descr' => 'smHealthMonitorName', > 'descr_transform' => [ 'action' => 'ireplace', 'from' => [ > 'Temperature', 'Temp', 'Voltage', ' Fan Speed', ' Speed' ], 'to' => '' ], > 'oid_class' => 'smHealthMonitorType', > - 'map_class' => [ 0 => 'fanspeed', 1 => 'voltage', 2 => > 'temperature' ], > + 'map_class' => [ 0 => 'fanspeed', 2 => 'temperature' ], > // This table have unit oid smHealthMonitorDivisor, but it always 0 > 'oid_scale' => 'smHealthMonitorReadingUnit', > 'map_scale' => [ 'C' => 1, 'mV' => 0.001, 'RPM' => 1 ], > 'oid_num' => '.1.3.6.1.4.1.10876.2.1.1.1.1.4', > + 'min' => 0, > 'limit_scale' => 'scale', // limits scale same as main scale > 'oid_limit_high' => 'smHealthMonitorHighLimit', > 'oid_limit_low' => 'smHealthMonitorLowLimit', > @@ -47,6 +50,31 @@ > 'rename_rrd' => 'supermicro-%index%' > ); > > +// voltage > + > +$config['mibs'][$mib]['sensor'][] = array( > + 'table' => 'smHealthMonitorTable', > + 'oid' => 'smHealthMonitorReading', > + 'oid_descr' => 'smHealthMonitorName', > + 'descr_transform' => [ 'action' => 'ireplace', 'from' => [ > 'Temperature', 'Temp', 'Voltage', ' Fan Speed', ' Speed' ], 'to' => '' ], > + 'oid_class' => 'smHealthMonitorType', > + 'map_class' => [ 1 => 'voltage' ], > + // This table have unit oid smHealthMonitorDivisor, but it always 0 > + //'oid_scale' => 'smHealthMonitorReadingUnit', > + //'map_scale' => [ 'C' => 1, 'mV' => 0.001, 'RPM' => 1 ], > + 'limit_scale' => 'scale', // limits scale same as main scale > + 'scale' => 0.001, > + 'oid_num' => '.1.3.6.1.4.1.10876.2.1.1.1.1.4', > + 'min' => 0, > + 'max' => 250000, > + 'oid_limit_high' => 'smHealthMonitorHighLimit', > + 'oid_limit_low' => 'smHealthMonitorLowLimit', > + 'test' => [ 'field' => 'smHealthMonitorReadingUnit', > 'operator' => 'notin', 'value' => [ 'ThermalText', 'N/A' ] ], > + 'rename_rrd' => 'supermicro-%index%' > +); This fix the problem i had with scale changing for voltage. -- Torstein Eide Torsteine(a)gmail.com

2 3

Settings page for status?
by Torstein Eide 27 Jan '20

27 Jan '20

I the settings page we have option for "Ignore" and "Disable" for sensor, and in the database we have similar columns for status. Why is "section=status/" not a thing? -- Torstein Eide Torsteine(a)gmail.com

2 2

How to add support for status?
by Torstein Eide 27 Jan '20

27 Jan '20

Hi I like to add support for lcsStatusVcCllMngrLinesEntry, in LCOS-MIB. But i can't find any doc on how to add it. Can some point me to where i can read about what i need? I have found some example, like what is done in "apc.inc.php", but it does not contain any description. LcsStatusVcCllMngrLinesEntry ::= SEQUENCE { lcsStatusVcCllMngrLinesEntryIndex Integer32, lcsStatusVcCllMngrLinesEntryName DisplayString, lcsStatusVcCllMngrLinesEntryType INTEGER, lcsStatusVcCllMngrLinesEntryRegStatus INTEGER, lcsStatusVcCllMngrLinesEntryLineStatus INTEGER, lcsStatusVcCllMngrLinesEntryQuality INTEGER, lcsStatusVcCllMngrLinesEntryNumber DisplayString, lcsStatusVcCllMngrLinesEntryDomain DisplayString, lcsStatusVcCllMngrLinesEntryRegState INTEGER, lcsStatusVcCllMngrLinesEntryInccallrecv Integer32, lcsStatusVcCllMngrLinesEntryInccallansw Integer32, lcsStatusVcCllMngrLinesEntryInccallconn Integer32, lcsStatusVcCllMngrLinesEntryInccallfail Integer32, lcsStatusVcCllMngrLinesEntryOutcallattm Integer32, lcsStatusVcCllMngrLinesEntryOutcallansw Integer32, lcsStatusVcCllMngrLinesEntryOutcallconn Integer32, lcsStatusVcCllMngrLinesEntryOutcallfail Integer32, lcsStatusVcCllMngrLinesEntryRemoteIpAddress DisplayString } -- Torstein Eide Torsteine(a)gmail.com

3 6

Systemd files
by Torstein Eide 25 Jan '20

25 Jan '20

Hi I have made systemd files for Observium. This makes it simplare to log from poller or discovery. It also adds a Max runtime control. It should probably be a max runtime per device. https://github.com/Eideen/Observium-systemdfiles -- Torstein Eide Torsteine(a)gmail.com

4 5

Cisco IE1000 support
by Torstein Eide 24 Jan '20

24 Jan '20

Hi I have made model, mibs and os config for CIE1000 seire MIBS can be fond her: https://gofile.io/?c=HcnPNn config her: https://gist.github.com/Eideen/144d9b38f85042d77619f91985bd85b6 I was unable to get the status LED working. -- Torstein Eide Torsteine(a)gmail.com

3 8

Real Time port graphing not working when enabling SSL
by cody＠mail-server.cc 23 Jan '20

23 Jan '20

When i enable HTTPS on Apache2 vhost then the Real Time port graph stays blank - when i revert to HTTP it's working again. Checked with the stable, rolling and CE version - same behavior on all of them. Do i need to set something extra or does anyone else have the same issue? Thanks, cody

3 3

Blanks in graphs
by Thodoris Lakiotis 22 Jan '20

22 Jan '20

Hi I am facing blanks in my graphs. I fill like the polling time is taking longer than graphing time. Does anyone find a solution?? I mostly polling network devices? Kind Regards Theo

2 2

device sensor only shows 1-20 interfaces
by Edvinas Kairys 22 Jan '20

22 Jan '20

Hello, our cisco Nexus9000 C9372PX device shows sensors data for only first 20 (of 54 )interfaces. Software BIOS: version 07.34 NXOS: version 7.0(3)I2(1a) this commands shows sensors data for 1-20 interfaces too: https://pastebin.com/KxxZLF57 Is it possible to do something about it ? I need interfaces sensors data like receive/tranceive power. btw. we're using SNMP v3. Thank you.

2 2

switch from trunk to stable
by cody＠mail-server.cc 17 Jan '20

17 Jan '20

How do i switch from trunk to stable? observium@obsmon:~$ svn switch --relocate http://svn.observium.org/svn/observium/trunk http://svn.observium.org/svn/observium/branches/stable svn: E155024: Invalid relocation destination: 'http://svn.observium.org/svn/observium/branches/stable' (does not point to target) observium@obsmon:~$ Thanks, cody

2 1

Alert : Matching "null" value in condition?
by Johann Mallet 16 Jan '20

16 Jan '20

Hello, In alerting, do you have the option to match "null" value? For example, to match/not match the sensor with sensor_limit_warm = null value. My goal it's create alerting with "sensor_value gt @sensor_warn" but excluding when sensor_warm is "null" in database. Because that's create false positives. Thanks! Johann

4 6

unsubscribe
by Kaustubh Parthasarthy, CLSA 14 Jan '20

14 Jan '20

unsubscribe Kaustubh Parthasarthy Analyst, Production Management Group D +91 20 6646 8625 | M +91 989 284 4625 | T +91 20 6646 8888 4/F, C-Wing, Panchshil Tech Park-1, Yerawada, Pune 411006, India [:1. Social Media Icons:CLSA_Social Media Icons_linkedin.png]<https://hk.linkedin.com/company/clsa>[:1. Social Media Icons:CLSA_Social Media Icons_twitter.png]<https://twitter.com/clsainsights?lang=en>[:1. Social Media Icons:CLSA_Social Media Icons_youtube.png]<https://www.youtube.com/channel/UC0qWp_lLnOcRYmBlCNQgZKA>[:1. Social Media Icons:CLSA_Social Media Icons_facebook.png]<https://www.facebook.com/clsacommunity/> clsa.com<https://www.clsa.com/> Insights. Liquidity. Capital. [CLSA_RGB]<https://www.clsa.com/member> A CITIC Securities Company The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. Please consider before printing. CLSA is ISO14001 certified and committed to reducing its impact on the environment.

1 0

Re: [Observium] observium Digest, Vol 114, Issue 4
by Justin Radke 13 Jan '20

13 Jan '20

A quick follow-up and a thanks: I've waited several days now with the number of threads increased and Markus' suggestion fixed my problem. Thank you Markus!! -=JGR ---------------------------------------------------------------------- Date: Sat, 4 Jan 2020 18:47:58 +0100 From: Markus Klock <markus(a)best-practice.se> To: Observium <observium(a)observium.org> Subject: Re: [Observium] observium Digest, Vol 114, Issue 2 Message-ID: <CAF6uZmJMK4rYbFEoay+Hpg=sW-W23uck1biu+NNq4tzfLS2STg(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Hi Justin, The poller needs to finish polling all your devices in 5min(300s) and your system takes 1600s to finish one pollinground. This is because you only run the poller-wrapper with 1 thread, you should run as many threads as twice the amount of CPU-cores on this VM. Try increasing them and wait 10min and then check the poller-wrapper Total time-graph again. /Markus

1 0

Re: [Observium] Quote Request for Observium Professional
by Crayon Licensing Sweden 13 Jan '20

13 Jan '20

Hi, A little reminder of our request below, This is kind of urgent so would really appreciate if you could get back to us as soon as possible. Thanks in advance! Kind regards, Oskar Söderberg| Order administrator Crayon AB | licens(a)crayon.se<mailto:licens@crayon.se> | Visit: Landsvägen 50a, 172 63 Sundbyberg | Switchboard +(46) 8 505 307 30,| www.crayon.com<http://www.crayon.com/> | [cid:image002.png@01CF3495.06CF8AF0] From: Crayon Licensing Sweden Sent: den 10 januari 2020 13:53 To: observium-subscribe(a)observium.org Cc: 'observium(a)observium.org' <observium(a)observium.org>; 'observium-bounces(a)observium.org' <observium-bounces(a)observium.org> Subject: FW: Quote Request for Observium Professional Importance: High Hi, A little reminder of our request below, This is kind of urgent so would really appreciate if you could get back to us as soon as possible. Thanks in advance! Kind regards, Oskar Söderberg| Order administrator Crayon AB | licens(a)crayon.se<mailto:licens@crayon.se> | Visit: Landsvägen 50a, 172 63 Sundbyberg | Switchboard +(46) 8 505 307 30,| www.crayon.com<http://www.crayon.com/> | [cid:image002.png@01CF3495.06CF8AF0] From: Crayon Licensing Sweden Sent: den 7 januari 2020 10:41 To: observium(a)observium.org<mailto:observium@observium.org> Cc: observium-bounces(a)observium.org<mailto:observium-bounces@observium.org> Subject: Quote Request for Observium Professional Hi, We have a customer who is interested in these licenses below, they want 2 in total. Can we purchase this from you by sending a PO and paying by invoice? Do you have any reseller discounts and is the delivery electronic? Would appreciate if you could provide us with a quote for this: FUJ:3PARTSW Observium Professional license FUJ:3PARTSW Observium Professional license Thanks in advance! Kind regards, Oskar Söderberg| Order administrator Crayon AB | licens(a)crayon.se<mailto:licens@crayon.se> | Visit: Landsvägen 50a, 172 63 Sundbyberg | Switchboard +(46) 8 505 307 30,| www.crayon.com<http://www.crayon.com/> | [cid:image002.png@01CF3495.06CF8AF0] ________________________________ Notice: This transmittal and/or attachments may be privileged or confidential. It is intended solely for the addressee named above. Any review, dissemination, or copying is strictly prohibited. If you have received this transmittal in error, please notify us immediately by reply and immediately delete this message and all its attachments. Crayon Group AS and its subsidiaries do not accept liability for any errors, omissions, information or viruses contained in the transmission of this message. Personal Data: Crayon Group processes Personal Data for Business Communications and Direct Marketing purposes on the lawful basis of Legitimate Interest. To find out more, please see our Crayon privacy notice<https://www.crayon.com/en/about-us/global-privacy-notice/>. If you are receiving Marketing material, but your business needs have changed, we can remove this email from our marketing lists if you simply send us a short email to: Opt-Out(a)Crayon.com. ________________________________

2 1

FW: Quote Request for Observium Professional
by Crayon Licensing Sweden 11 Jan '20

11 Jan '20

Hi, A little reminder of our request below, This is kind of urgent so would really appreciate if you could get back to us as soon as possible. Thanks in advance! Kind regards, Oskar Söderberg| Order administrator Crayon AB | licens(a)crayon.se<mailto:licens@crayon.se> | Visit: Landsvägen 50a, 172 63 Sundbyberg | Switchboard +(46) 8 505 307 30,| www.crayon.com<http://www.crayon.com/> | [cid:image002.png@01CF3495.06CF8AF0] From: Crayon Licensing Sweden Sent: den 7 januari 2020 10:41 To: observium(a)observium.org<mailto:observium@observium.org> Cc: observium-bounces(a)observium.org<mailto:observium-bounces@observium.org> Subject: Quote Request for Observium Professional Hi, We have a customer who is interested in these licenses below, they want 2 in total. Can we purchase this from you by sending a PO and paying by invoice? Do you have any reseller discounts and is the delivery electronic? Would appreciate if you could provide us with a quote for this: FUJ:3PARTSW Observium Professional license FUJ:3PARTSW Observium Professional license Thanks in advance! Kind regards, Oskar Söderberg| Order administrator Crayon AB | licens(a)crayon.se<mailto:licens@crayon.se> | Visit: Landsvägen 50a, 172 63 Sundbyberg | Switchboard +(46) 8 505 307 30,| www.crayon.com<http://www.crayon.com/> | [cid:image002.png@01CF3495.06CF8AF0] ________________________________ Notice: This transmittal and/or attachments may be privileged or confidential. It is intended solely for the addressee named above. Any review, dissemination, or copying is strictly prohibited. If you have received this transmittal in error, please notify us immediately by reply and immediately delete this message and all its attachments. Crayon Group AS and its subsidiaries do not accept liability for any errors, omissions, information or viruses contained in the transmission of this message. Personal Data: Crayon Group processes Personal Data for Business Communications and Direct Marketing purposes on the lawful basis of Legitimate Interest. To find out more, please see our Crayon privacy notice<https://www.crayon.com/en/about-us/global-privacy-notice/>. If you are receiving Marketing material, but your business needs have changed, we can remove this email from our marketing lists if you simply send us a short email to: Opt-Out(a)Crayon.com. ________________________________

3 2

read RRD by API
by Farshid Abediny 11 Jan '20

11 Jan '20

Hello, Is there any way to read RRD file and extract data about total bytes from graphs? Thank you.

2 1

Devices doesn't discover
by Tomasz Karczewski 11 Jan '20

11 Jan '20

Hi, Observium Pro after last update does not discover devices and all device are down. /usr/bin/php /opt/observium/discovery.php -h all ___ _ _ / _ \ | |__ ___ ___ _ __ __ __(_) _ _ _ __ ___ | | | || '_ \ / __| / _ \| '__|\ \ / /| || | | || '_ ` _ \ | |_| || |_) |\__ \| __/| | \ V / | || |_| || | | | | | \___/ |_.__/ |___/ \___||_| \_/ |_| \__,_||_| |_| |_| Observium Professional 20.1.10221 http://www.observium.org -- Database is up to date. ##### Starting discovery run at 2020-01-11 00:48:56 ##### ##### Finished discovery run at 2020-01-11 00:48:56 ##### o Devices Discovered 0 o Discovery Time 0.029 secs o Memory usage 4MB (peak: 4MB) o MySQL Usage Cell[2/0s] Row[4/0.001s] Rows[4/0.001s] Column[0/0s] Update[1/0.005s] Insert[1/0.013s] Delete[1/0.004s] o RRDTool Usage Tomasz Karczewski Administrator Sieci tkarczewski(a)man.olsztyn.pl http://www.man.olsztyn.pl http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie

3 3

My sensors were deleted
by Joe Brouillette 10 Jan '20

10 Jan '20

Good morning, I was just trying to check the history on one of my Geist Watchdog environment sensors and I have no environment graphs - temperature, humidity, or dew point. It's the same for all of my Geist devices. I checked the logs and found these entries: 2019-12-05 12:34:10 OS-ServerRoom Dew Point Sensor deleted: dewpoint geist-v4-mib internalDewPoint.1 OS-ServerRoom Dew Point 2019-12-05 12:34:10 OS-ServerRoom Humidity Sensor deleted: humidity geist-v4-mib internalHumidity.1 OS-ServerRoom Humidity 2019-12-05 12:34:10 OS-ServerRoom Temperature Sensor deleted: temperature geist-v4-mib internalTemp.1 OS-ServerRoom Temperature I have Device Availability and Device Uptime graphs but that's it. I ran a discovery on them but after an hour still no enviromental data. I checked a couple of the devices and the information is there. Any ideas on what's going on and how to fix it? Thanks, Joe Brouillette "Any sufficiently advanced science looks like magic." - Arthur C. Clarke "All magic comes with a price." - Rumplestiltskin

2 1

Re: [Observium] Quote Request for Observium Professional
by Crayon Licensing Sweden 10 Jan '20

10 Jan '20

Hi, A little reminder of our request below, This is kind of urgent so would really appreciate if you could get back to us as soon as possible. Thanks in advance! Kind regards, Oskar Söderberg| Order administrator Crayon AB | licens(a)crayon.se<mailto:licens@crayon.se> | Visit: Landsvägen 50a, 172 63 Sundbyberg | Switchboard +(46) 8 505 307 30,| www.crayon.com<http://www.crayon.com/> | [cid:image002.png@01CF3495.06CF8AF0] From: Crayon Licensing Sweden Sent: den 7 januari 2020 10:41 To: observium(a)observium.org Cc: observium-bounces(a)observium.org Subject: Quote Request for Observium Professional Hi, We have a customer who is interested in these licenses below, they want 2 in total. Can we purchase this from you by sending a PO and paying by invoice? Do you have any reseller discounts and is the delivery electronic? Would appreciate if you could provide us with a quote for this: FUJ:3PARTSW Observium Professional license FUJ:3PARTSW Observium Professional license Thanks in advance! Kind regards, Oskar Söderberg| Order administrator Crayon AB | licens(a)crayon.se<mailto:licens@crayon.se> | Visit: Landsvägen 50a, 172 63 Sundbyberg | Switchboard +(46) 8 505 307 30,| www.crayon.com<http://www.crayon.com/> | [cid:image002.png@01CF3495.06CF8AF0] ________________________________ Notice: This transmittal and/or attachments may be privileged or confidential. It is intended solely for the addressee named above. Any review, dissemination, or copying is strictly prohibited. If you have received this transmittal in error, please notify us immediately by reply and immediately delete this message and all its attachments. Crayon Group AS and its subsidiaries do not accept liability for any errors, omissions, information or viruses contained in the transmission of this message. Personal Data: Crayon Group processes Personal Data for Business Communications and Direct Marketing purposes on the lawful basis of Legitimate Interest. To find out more, please see our Crayon privacy notice<https://www.crayon.com/en/about-us/global-privacy-notice/>. If you are receiving Marketing material, but your business needs have changed, we can remove this email from our marketing lists if you simply send us a short email to: Opt-Out(a)Crayon.com. ________________________________

1 0

FDQN is email notices
by Robert Zeff 09 Jan '20

09 Jan '20

I am using an FDQN for Observium. When I get an email notification, it looks like: How can I get the URL in the email to use the FDQN? Note that the 10.14.1.76 is the internal IP of our instance. We do a NAT to an outside IP with a DNS record. So I’d like the URL to be http://observium.mydomain.com Thanks, -Robert

2 1

Alerting E-mail more recipients
by Wissen, Tobias (EDV) 09 Jan '20

09 Jan '20

Hi, i have a alert checker with 2 or more e-mail contacts. But only the 1st recives the mail. Other will not. Is there a bug or limitation of version? Observium Community Edition 19.8.10000 Mit freundlichen Grüßen, Tobias Wissen BERDING BETON GmbH Verwaltung Steinfeld * EDV * Industriestr. 6 * 49439 Steinfeld Tel: 05492 87 290 * Mobil: 0151-14823618 * Fax: 05492 87 295 * E-Mail: t.wissen(a)berdingbeton.de<mailto:t.wissen@berdingbeton.de> Gf: Georg Berding sen., Georg Berding jun., Matthias Hansen, Gert Waltermann * Sitz: 49439 Steinfeld * Registergericht AG Oldenburg: HRB 110334 * USt-ID-Nr.: DE 811247624 * Der Inhalt dieser E-Mail kann vertrauliche und/oder rechtlich geschützte Informationen enthalten und ist ausschließlich für den bezeichneten Adressaten bestimmt. Wenn Sie nicht der vorgesehene Adressat dieser E-Mail oder dessen Vertreter sein sollten, informieren Sie bitte den Absender und löschen Sie die E-Mail. Das unerlaubte Kopieren, Veröffentlichen sowie die unbefugte Weitergabe ist nicht gestattet. ________________________________

2 1

LXC monitoring via SNMP
by cody＠mail-server.cc 09 Jan '20

09 Jan '20

I'm monitoring 3 LXC containers of my new installed homelab server but somehow the CPU values polled via SNMP are completely messy while checking inside the container with TOP they are correct there. Attached is a screenshot of one of three fresh installed LXC containers where they are doing nothing yet showing the CPU utilization via SNMP and TOP. Also the physical server does nothing and is showing the correct values via SNMP and TOP. Anyone know how to fix that? thx, cody

4 7

Re: [Observium] svn.log
by Gumilar Siegfried MSc. 09 Jan '20

09 Jan '20

Hi, I also just wanted to check all the recent changes before the upgrade. @Adam: Is there any chance this will be updated again? Regards, Siegfried Von: observium <observium-bounces(a)observium.org> Im Auftrag von Christian Eriksson via observium Gesendet: Dienstag, 12. November 2019 15:40 An: Observium <observium(a)observium.org> Cc: Christian Eriksson <christian.eriksson(a)advania.com> Betreff: [Observium] svn.log Hi, https://www.observium.org/svn.log does not show the latest changes anymore. It is nice to read the changelog before we upgrade our system Christian Eriksson Service Area Manager Advania, Network Operations

2 1

with the demise of snmp in win 10
by ira k 07 Jan '20

07 Jan '20

How are people adding Win 10 machines to Observium? Ira Kemp

4 8

Quote Request for Observium Professional
by Crayon Licensing Sweden 07 Jan '20

07 Jan '20

Hi, We have a customer who is interested in these licenses below, they want 2 in total. Can we purchase this from you by sending a PO and paying by invoice? Do you have any reseller discounts and is the delivery electronic? Would appreciate if you could provide us with a quote for this: FUJ:3PARTSW Observium Professional license FUJ:3PARTSW Observium Professional license Thanks in advance! Kind regards, Oskar Söderberg| Order administrator Crayon AB | licens(a)crayon.se<mailto:licens@crayon.se> | Visit: Landsvägen 50a, 172 63 Sundbyberg | Switchboard +(46) 8 505 307 30,| www.crayon.com<http://www.crayon.com/> | [cid:image002.png@01CF3495.06CF8AF0] ________________________________ Notice: This transmittal and/or attachments may be privileged or confidential. It is intended solely for the addressee named above. Any review, dissemination, or copying is strictly prohibited. If you have received this transmittal in error, please notify us immediately by reply and immediately delete this message and all its attachments. Crayon Group AS and its subsidiaries do not accept liability for any errors, omissions, information or viruses contained in the transmission of this message. Personal Data: Crayon Group processes Personal Data for Business Communications and Direct Marketing purposes on the lawful basis of Legitimate Interest. To find out more, please see our Crayon privacy notice<https://www.crayon.com/en/about-us/global-privacy-notice/>. If you are receiving Marketing material, but your business needs have changed, we can remove this email from our marketing lists if you simply send us a short email to: Opt-Out(a)Crayon.com. ________________________________

1 0

Re: [Observium] Cronjob Problem
by adama＠observium.org 06 Jan '20

06 Jan '20

The relevant code in poller-wrapper is : def get_config_data(): config_cmd = ['/usr/bin/env', 'php', '%s/config_to_json.php' % ob_install_dir] try: proc = subprocess.Popen(config_cmd, stdout=subprocess.PIPE, stdin=subprocess.PIPE) except: print("ERROR: Could not execute: %s" % config_cmd) sys.exit(2) return proc.communicate()[0].decode('utf-8') # decode required in python3 try: config = json.loads(get_config_data()) except: print("ERROR: Could not load or parse observium configuration, are PATHs correct?") sys.exit(2) The error is referring to json.loads being unable to parse the output from config_to_json.php. So either config_to_json.php isn’t outputting the config, or it’s not parseable, perhaps it has PHP errors in it. Adam. From: Reiner Marsollek <reiner(a)marsollek.tel> Sent: 05 January 2020 17:08 To: Adam Armstrong <adama(a)memetic.org> Subject: Re[2]: [Observium] Cronjob Problem Hello, yes it is a Debian variant. The cronjob is started with root. But this error appears with the path. Reiner ------ Originalnachricht ------ Von: "Adam Armstrong" <adama(a)memetic.org <mailto:adama@memetic.org> > An: "Reiner Marsollek via observium" <observium(a)observium.org <mailto:observium@observium.org> > Cc: "Reiner Marsollek" <reiner(a)marsollek.tel <mailto:reiner@marsollek.tel> > Gesendet: 05.01.2020 17:06:35 Betreff: Re: [Observium] Cronjob Problem Is this on a Debian variant? It's possible the variant is different in such a way that the script doesn't cater for. Still, it's likely either permissions, or the PHP interpreter is behaving oddly somehow. Running the wrapper as the user that executes the from jobs works? (Running it as root for diagnostic purposes is worthless, and will break your installation's file permissions) Adam. Sent from BlueMail <http://www.bluemail.me/r?b=15726> On 5 Jan 2020, at 14:56, Reiner Marsollek via observium <observium(a)observium.org <mailto:observium@observium.org> > wrote: I have installed it with the install script on a raspberry pi3. Am 5. Januar 2020 3:13:30 nachm. schrieb Adam Armstrong via observium <observium(a)observium.org <mailto:observium@observium.org> >: What is this installed on? Did you follow the install guide or use the install script? This is likely either permissions or the PHP interpreter not running the config generator. Adam. Sent from BlueMail <http://www.bluemail.me/r?b=15726> On 5 Jan 2020, at 13:41, Reiner Marsollek via observium < observium(a)observium.org <mailto:observium@observium.org> > wrote: Same Problem when i start the cron manuel. All pathes in config are correct! Ausgabe des Befehls cd /opt/observium/ && ./poller-wrapper.py .. ERROR: Could not load or parse observium configuration, are PATHs correct? ------ Originalnachricht ------ Von: "Ray Poorman via observium" < observium(a)observium.org <mailto:observium@observium.org> > An: "Observium" < observium(a)observium.org <mailto:observium@observium.org> > Cc: "Ray Poorman" < rpoorman(a)cssnw.com <mailto:rpoorman@cssnw.com> > Gesendet: 04.01.2020 21:39:59 Betreff: Re: [Observium] Cronjob Problem Note where the cd is to move to the correct dir in the command [root@observium observium]# cat /etc/cron.d/observium 33 */3 * * * Useracct cd /opt/observium/ && ./discovery.php -h all >> /dev/null 2>&1 */5 * * * * Useracct cd /opt/observium/ && ./discovery.php -h new >> /dev/null 2>&1 # */5 * * * * Useracct cd /opt/observium/ && ./poller.php -h all >> /dev/null 2>&1 */5 * * * * Useracct /opt/observium/poller-wrapper.py >> /dev/null 2>&1 */5 * * * * Useracct /opt/observium/poll-billing.php >> /dev/null 2>&1 01 * * * * Useracct /opt/observium/billing-calculate.php >> /dev/null 2>&1 # Run housekeeping script daily for syslog, eventlog and alert log 13 5 * * * Useracct /opt/observium/housekeeping.php -sel >> /dev/null 2>&1 # Run housekeeping script daily for rrds, ports, orphaned entries in the database and performance data 47 4 * * * Useracct /opt/observium/housekeeping.php -rptb >> /dev/null 2>&1 -- Ray Poorman, CTO CSS Integration & Communications 1911 C St Bellingham WA 98225 360-671-4878 On January 4, 2020 at 12:39:06 PM, Ray Poorman (rpoorman(a)cssnw.com <mailto:rpoorman@cssnw.com> ) wrote: When you run the job what directory are you sitting in.. are there absolute paths? if you are say in /root and run /opt/observium/poller.php does it fail I bet it does or it doesn’t know where config file is. Are these set right? ### Locations $config['install_dir'] = "/opt/observium"; $config['html_dir'] = $config['install_dir'] . "/html"; $config['rrd_dir'] = $config['install_dir'] . "/rrd"; $config['log_file'] = $config['install_dir'] . "/observium.log”; Here is my /etc/cron.d/observium file -- Ray Poorman, CTO CSS Integration & Communications 1911 C St Bellingham WA 98225 360-671-4878 On January 4, 2020 at 11:27:11 AM, Reiner Marsollek via observium (observium(a)observium.org <mailto:observium@observium.org> ) wrote: Hello, here's the problem. If I start the poller-wrapper manually in the shell it works without problems. But if it is started by the cronjob, I get the following error message: ERROR: Could not load or parse observium configuration, are PATHs correct? Does anyone know the problem and how to fix it? Reiner _______________________________________________ observium mailing list observium(a)observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _____ observium mailing list observium(a)observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org <mailto:observium%40observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _____ observium mailing list observium(a)observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Oberservium and Exchange watching
by info＠necker.at 05 Jan '20

05 Jan '20

Hello Ist a reporting or watching Funktion for Exchange 2016? And a Tutorial in german. Thx a lot Mario

3 2

Re: [Observium] Cronjob Problem
by Ray Poorman 05 Jan '20

05 Jan '20

Note where the cd is to move to the correct dir in the command [root@observium observium]# cat /etc/cron.d/observium 33 */3 * * * Useracct cd /opt/observium/ && ./discovery.php -h all >> /dev/null 2>&1 */5 * * * * Useracct cd /opt/observium/ && ./discovery.php -h new >> /dev/null 2>&1 # */5 * * * * Useracct cd /opt/observium/ && ./poller.php -h all >> /dev/null 2>&1 */5 * * * * Useracct /opt/observium/poller-wrapper.py >> /dev/null 2>&1 */5 * * * * Useracct /opt/observium/poll-billing.php >> /dev/null 2>&1 01 * * * * Useracct /opt/observium/billing-calculate.php >> /dev/null 2>&1 # Run housekeeping script daily for syslog, eventlog and alert log 13 5 * * * Useracct /opt/observium/housekeeping.php -sel >> /dev/null 2>&1 # Run housekeeping script daily for rrds, ports, orphaned entries in the database and performance data 47 4 * * * Useracct /opt/observium/housekeeping.php -rptb >> /dev/null 2>&1 -- Ray Poorman, CTO CSS Integration & Communications 1911 C St Bellingham WA 98225 360-671-4878 On January 4, 2020 at 12:39:06 PM, Ray Poorman (rpoorman(a)cssnw.com) wrote: When you run the job what directory are you sitting in.. are there absolute paths? if you are say in /root and run /opt/observium/poller.php does it fail I bet it does or it doesn’t know where config file is. Are these set right? ### Locations $config['install_dir'] = "/opt/observium"; $config['html_dir'] = $config['install_dir'] . "/html"; $config['rrd_dir'] = $config['install_dir'] . "/rrd"; $config['log_file'] = $config['install_dir'] . "/observium.log”; Here is my /etc/cron.d/observium file -- Ray Poorman, CTO CSS Integration & Communications 1911 C St Bellingham WA 98225 360-671-4878 On January 4, 2020 at 11:27:11 AM, Reiner Marsollek via observium (observium(a)observium.org) wrote: Hello, here's the problem. If I start the poller-wrapper manually in the shell it works without problems. But if it is started by the cronjob, I get the following error message: ERROR: Could not load or parse observium configuration, are PATHs correct? Does anyone know the problem and how to fix it? Reiner _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 4

Cronjob Problem
by Reiner Marsollek 04 Jan '20

04 Jan '20

Hello, here's the problem. If I start the poller-wrapper manually in the shell it works without problems. But if it is started by the cronjob, I get the following error message: ERROR: Could not load or parse observium configuration, are PATHs correct? Does anyone know the problem and how to fix it? Reiner

2 1

Re: [Observium] observium Digest, Vol 114, Issue 2
by Justin Radke 04 Jan '20

04 Jan '20

I hope the graphs show up below, thanks for your help: [cid:image001.png@01D5C244.174B6780] [cid:image002.png@01D5C244.CC3CD0C0] [cid:image003.png@01D5C244.CC3CD0C0] [cid:image004.png@01D5C244.CC3CD0C0] Please provide a screenshot of the "Polling information"-page. And if you monitor the Observium-VM itself with Observium then go to that device, Graphs>Processor>Extended Processor Utilisation and screenshot that graph too please /Markus -----Original Message----- From: observium <observium-bounces(a)observium.org> On Behalf Of observium-request(a)observium.org Sent: Friday, January 3, 2020 4:00 AM To: observium(a)observium.org Subject: observium Digest, Vol 114, Issue 2 Send observium mailing list submissions to observium(a)observium.org<mailto:observium@observium.org> To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org<mailto:observium-request@observium.org> You can reach the person managing the list at observium-owner(a)observium.org<mailto:observium-owner@observium.org> When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Gaps in Graphs (Justin Radke) 2. Re: Gaps in Graphs (Michael) 3. Re: Gaps in Graphs (Justin Radke) 4. Re: Gaps in Graphs (Markus Klock) ---------------------------------------------------------------------- Message: 1 Date: Thu, 2 Jan 2020 20:29:29 +0000 From: Justin Radke <justin.radke(a)directlink.coop<mailto:justin.radke@directlink.coop>> To: "observium(a)observium.org<mailto:observium@observium.org>" <observium(a)observium.org<mailto:observium@observium.org>> Subject: [Observium] Gaps in Graphs Message-ID: <MWHPR06MB3374668112EE9110EE59D63782200(a)MWHPR06MB3374.namprd06.prod.outlook.com<mailto:MWHPR06MB3374668112EE9110EE59D63782200@MWHPR06MB3374.namprd06.prod.outlook.com>> Content-Type: text/plain; charset="utf-8" Hello, periodically I have "gaps" in my graphs which appears to be when Observium was unable to reach a particular host. This problem occurs on multiple hosts at the same time on different network segments and I have been unable to find any commonality except for the Observium server itself. I noticed that the gaps in the graph also exist at the same times for Observium's checks of localhost. Checking localhost of course demonstrates this is not a lack of network connectivity outside of the server. At these times I also found these entries but I'm not sure if they are related since they are merely syslog messages but thought I'd mention it: Jan 1 21:39:24 voldemort rsyslogd-2177: imuxsock begins to drop messages from pid 27161 due to rate-limiting Jan 1 21:45:50 voldemort rsyslogd-2177: imuxsock lost 22 messages from pid 27161 due to rate-limiting root@observium(~) :ps auxw | grep 27161 root 27161 0.0 0.0 200848 6520 ? S 2019 15:32 /usr/sbin/snmpd -LS0-6d -Lf /dev/null -p /var/run/snmpd.pid What would cause this and how can I solve this matter? -=JGR -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://postman.memetic.org/pipermail/observium/attachments/20200102/d19edce…> ------------------------------ Message: 2 Date: Fri, 03 Jan 2020 08:17:38 +1100 From: Michael <obslist(a)smarsz.com<mailto:obslist@smarsz.com>> To: Observium <observium(a)observium.org<mailto:observium@observium.org>>, Justin Radke via observium <observium(a)observium.org<mailto:observium@observium.org>>, "observium(a)observium.org<mailto:observium@observium.org>" <observium(a)observium.org<mailto:observium@observium.org>> Cc: Justin Radke <justin.radke(a)directlink.coop<mailto:justin.radke@directlink.coop>> Subject: Re: [Observium] Gaps in Graphs Message-ID: <930E4B10-85FA-4268-925D-B70E38AF1E50(a)smarsz.com<mailto:930E4B10-85FA-4268-925D-B70E38AF1E50@smarsz.com>> Content-Type: text/plain; charset=utf-8 It sounds like you are getting a large amount of udp traffic at one time. We run our observium server as a vmware guest. We had to do a fair bit of tuning to get udp and rx buffers to a point where we weren't losing responses (& in your case, syslog messages). Might be worth looking into. Michael On 3 January 2020 7:29:29 AM AEDT, Justin Radke via observium <observium(a)observium.org<mailto:observium@observium.org>> wrote: >Hello, periodically I have "gaps" in my graphs which appears to be when >Observium was unable to reach a particular host. This problem occurs on >multiple hosts at the same time on different network segments and I >have been unable to find any commonality except for the Observium >server itself. I noticed that the gaps in the graph also exist at the >same times for Observium's checks of localhost. Checking localhost of >course demonstrates this is not a lack of network connectivity outside >of the server. > >At these times I also found these entries but I'm not sure if they are >related since they are merely syslog messages but thought I'd mention >it: >Jan 1 21:39:24 voldemort rsyslogd-2177: imuxsock begins to drop >messages from pid 27161 due to rate-limiting Jan 1 21:45:50 voldemort >rsyslogd-2177: imuxsock lost 22 messages from pid 27161 due to >rate-limiting >root@observium(~) >:ps auxw | grep 27161 >root 27161 0.0 0.0 200848 6520 ? S 2019 15:32 >/usr/sbin/snmpd -LS0-6d -Lf /dev/null -p /var/run/snmpd.pid > >What would cause this and how can I solve this matter? > >-=JGR ------------------------------ Message: 3 Date: Thu, 2 Jan 2020 22:05:22 +0000 From: Justin Radke <justin.radke(a)directlink.coop<mailto:justin.radke@directlink.coop>> To: Michael <obslist(a)smarsz.com<mailto:obslist@smarsz.com>>, Observium <observium(a)observium.org<mailto:observium@observium.org>>, Justin Radke via observium <observium(a)observium.org<mailto:observium@observium.org>>, "observium(a)observium.org<mailto:observium@observium.org>" <observium(a)observium.org<mailto:observium@observium.org>> Subject: Re: [Observium] Gaps in Graphs Message-ID: <MWHPR06MB33746498C7B0EAB0DCDCADD382200(a)MWHPR06MB3374.namprd06.prod.outlook.com<mailto:MWHPR06MB33746498C7B0EAB0DCDCADD382200@MWHPR06MB3374.namprd06.prod.outlook.com>> Content-Type: text/plain; charset="utf-8" Thank you for your suggestion! Our Observium installation is virtualized using KVM on CentOS. Can you share what changes you needed to make? Did you have to make your changes on the Linux host or guest? Or was it a VMware nerd knob? -=JGR -----Original Message----- From: Michael <obslist(a)smarsz.com<mailto:obslist@smarsz.com>> Sent: Thursday, January 2, 2020 1:18 PM To: Observium <observium(a)observium.org<mailto:observium@observium.org>>; Justin Radke via observium <observium(a)observium.org<mailto:observium@observium.org>>; observium(a)observium.org<mailto:observium@observium.org> Cc: Justin Radke <justin.radke(a)directlink.coop<mailto:justin.radke@directlink.coop>> Subject: Re: [Observium] Gaps in Graphs It sounds like you are getting a large amount of udp traffic at one time. We run our observium server as a vmware guest. We had to do a fair bit of tuning to get udp and rx buffers to a point where we weren't losing responses (& in your case, syslog messages). Might be worth looking into. Michael On 3 January 2020 7:29:29 AM AEDT, Justin Radke via observium <observium(a)observium.org<mailto:observium@observium.org>> wrote: >Hello, periodically I have "gaps" in my graphs which appears to be when >Observium was unable to reach a particular host. This problem occurs on >multiple hosts at the same time on different network segments and I >have been unable to find any commonality except for the Observium >server itself. I noticed that the gaps in the graph also exist at the >same times for Observium's checks of localhost. Checking localhost of >course demonstrates this is not a lack of network connectivity outside >of the server. > >At these times I also found these entries but I'm not sure if they are >related since they are merely syslog messages but thought I'd mention >it: >Jan 1 21:39:24 voldemort rsyslogd-2177: imuxsock begins to drop >messages from pid 27161 due to rate-limiting Jan 1 21:45:50 voldemort >rsyslogd-2177: imuxsock lost 22 messages from pid 27161 due to >rate-limiting >root@observium(~) >:ps auxw | grep 27161 >root 27161 0.0 0.0 200848 6520 ? S 2019 15:32 >/usr/sbin/snmpd -LS0-6d -Lf /dev/null -p /var/run/snmpd.pid > >What would cause this and how can I solve this matter? > >-=JGR ------------------------------ Message: 4 Date: Fri, 3 Jan 2020 08:07:53 +0100 From: Markus Klock <markus(a)best-practice.se<mailto:markus@best-practice.se>> To: Observium <observium(a)observium.org<mailto:observium@observium.org>> Subject: Re: [Observium] Gaps in Graphs Message-ID: <CAF6uZm+fVgrJq8YxVnN1Bh=kE6UtQWkUKrB4mi3iH_PSvXS7mQ(a)mail.gmail.com<mailto:CAF6uZm+fVgrJq8YxVnN1Bh=kE6UtQWkUKrB4mi3iH_PSvXS7mQ@mail.gmail.com>> Content-Type: text/plain; charset="utf-8" Please provide a screenshot of the "Polling information"-page. And if you monitor the Observium-VM itself with Observium then go to that device, Graphs>Processor>Extended Processor Utilisation and screenshot that graph too please /Markus Den tors 2 jan. 2020 kl 23:05 skrev Justin Radke via observium < observium(a)observium.org<mailto:observium@observium.org>>: > Thank you for your suggestion! Our Observium installation is > virtualized using KVM on CentOS. Can you share what changes you needed > to make? Did you have to make your changes on the Linux host or guest? > Or was it a VMware nerd knob? > > -=JGR > > -----Original Message----- > From: Michael <obslist(a)smarsz.com<mailto:obslist@smarsz.com>> > Sent: Thursday, January 2, 2020 1:18 PM > To: Observium <observium(a)observium.org<mailto:observium@observium.org>>; Justin Radke via observium < > observium(a)observium.org<mailto:observium@observium.org>>; observium(a)observium.org<mailto:observium@observium.org> > Cc: Justin Radke <justin.radke(a)directlink.coop<mailto:justin.radke@directlink.coop>> > Subject: Re: [Observium] Gaps in Graphs > > It sounds like you are getting a large amount of udp traffic at one time. > > We run our observium server as a vmware guest. We had to do a fair bit > of tuning to get udp and rx buffers to a point where we weren't losing > responses (& in your case, syslog messages). > > Might be worth looking into. > > Michael > > > > > > > On 3 January 2020 7:29:29 AM AEDT, Justin Radke via observium < > observium(a)observium.org<mailto:observium@observium.org>> wrote: > >Hello, periodically I have "gaps" in my graphs which appears to be > >when Observium was unable to reach a particular host. This problem > >occurs on multiple hosts at the same time on different network > >segments and I have been unable to find any commonality except for > >the Observium server itself. I noticed that the gaps in the graph > >also exist at the same times for Observium's checks of localhost. > >Checking localhost of course demonstrates this is not a lack of > >network connectivity outside of the server. > > > >At these times I also found these entries but I'm not sure if they > >are related since they are merely syslog messages but thought I'd > >mention > >it: > >Jan 1 21:39:24 voldemort rsyslogd-2177: imuxsock begins to drop > >messages from pid 27161 due to rate-limiting Jan 1 21:45:50 > >voldemort > >rsyslogd-2177: imuxsock lost 22 messages from pid 27161 due to > >rate-limiting > >root@observium(~) > >:ps auxw | grep 27161 > >root 27161 0.0 0.0 200848 6520 ? S 2019 15:32 > >/usr/sbin/snmpd -LS0-6d -Lf /dev/null -p /var/run/snmpd.pid > > > >What would cause this and how can I solve this matter? > > > >-=JGR > _______________________________________________ > observium mailing list > observium(a)observium.org<mailto:observium@observium.org> > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://postman.memetic.org/pipermail/observium/attachments/20200103/3f220eb…> ------------------------------ Subject: Digest Footer _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium ------------------------------ End of observium Digest, Vol 114, Issue 2 *****************************************

2 1

Gaps in Graphs
by Justin Radke 03 Jan '20

03 Jan '20

Hello, periodically I have "gaps" in my graphs which appears to be when Observium was unable to reach a particular host. This problem occurs on multiple hosts at the same time on different network segments and I have been unable to find any commonality except for the Observium server itself. I noticed that the gaps in the graph also exist at the same times for Observium's checks of localhost. Checking localhost of course demonstrates this is not a lack of network connectivity outside of the server. At these times I also found these entries but I'm not sure if they are related since they are merely syslog messages but thought I'd mention it: Jan 1 21:39:24 voldemort rsyslogd-2177: imuxsock begins to drop messages from pid 27161 due to rate-limiting Jan 1 21:45:50 voldemort rsyslogd-2177: imuxsock lost 22 messages from pid 27161 due to rate-limiting root@observium(~) :ps auxw | grep 27161 root 27161 0.0 0.0 200848 6520 ? S 2019 15:32 /usr/sbin/snmpd -LS0-6d -Lf /dev/null -p /var/run/snmpd.pid What would cause this and how can I solve this matter? -=JGR

3 3

Cronjob Problem
by Reiner Marsollek 01 Jan '20

01 Jan '20

Hello, here's the problem. If I start the poller-wrapper manually in the shell it works without problems. But if it is started by the cronjob, I get the following error message: ERROR: Could not load or parse observium configuration, are PATHs correct? Does anyone know the problem and how to fix it?

1 0

RSSI graphs
by Robert Zeff 30 Dec '19

30 Dec '19

If I want to see Receive Power, Link Capacity, Transmit Power, etc., I can use this URL: http://10.14.4.76/p2pradios/view=graphs/ But I get all of the devices. I don't see a way to apply filters. Getting here from the Web page, I select Ports/P2P Radios. For Access points, all of their clients show up. In my case, I am seeing 700 devices on a single page. How can I apply a filter? Thanks, -Robert

3 4

Memory stats not showing on Juniper MX204s
by Gavin Henry 28 Dec '19

28 Dec '19

Hi all, We've just swapped out some Juniper MX80's for MX204s: https://www.juniper.net/us/en/products-services/routing/mx-series/mx204/ and we are running Juniper JunOS 18.2R1.9 ([MX204] Internet Router). We didn't add a new device, but Observium picked it up OK as it has the same details. But I've now noticed memory usage has gone. Any tips? -- Kind Regards, Gavin Henry. http://www.surevoip.co.uk

3 4

Getting RSSI or Signal Strength fromMikroTik W60G?
by rz＠nikola.com 27 Dec '19

27 Dec '19

I am running RouterBoard 6.46.1 All I can get is traffic, Processor Freq, & Storage. I'd like to get history on RSSI. Anyone have an hints on how to do do this? Thanks, -Robert

2 4

Re: [Observium] interactive graphs
by Rob VanHooren 20 Dec '19

20 Dec '19

NMIS had this a million years ago. (ref. https://sins.com.au/nmis/ <https://sins.com.au/nmis/> the precursor to what the Opmantek guys have now) their back end was all perl and RRDtool fwiw. R. > On Dec 20, 2019, at 07:00, observium-request(a)observium.org wrote: > > > From: Adam Armstrong <adama(a)memetic.org> > To: Justin Radke via observium <observium(a)observium.org> > Subject: Re: [Observium] Feature Request - Interactive Graphs > Message-ID: <f84b52b7-e09b-4711-8f59-50f83c2726be(a)memetic.org> > Content-Type: text/plain; charset="utf-8" > > This isn't something that can be easily added because of how graphs are generated. > > It's trivial with a graphing system that supports it and next to impossible with one that doesn't. > > Since we use RRDtool as our metric storage system, we don't have efficient direct access to the data and rely on RRDtool itself to generate the images. > > Adam. >

1 0

FSCOM snmp issue
by Pieter Meyer 13 Dec '19

13 Dec '19

Hi Guys I seem to have an issue with FS.com switches where the FS-SWITCH-MIB doesn’t seem to work correctly I have added a S5800 48F4S about a year ago, and on this switch I get more info like DDM info for SFP modules and CPU and mem info On the working device when running a discovery I get the following under sensors for S5800 48F4S ##### Module Start: sensors ##### o ENTITY-SENSOR-MIB o FS-SWITCH-MIB devMFanSpeed [....] devMSlotEnvironmentValue [.] temperCurrent [...] voltageCurrent [...] biasCurrent [...] transpowerCurrent [...] receivepowerCurrent [...] o FS-SWITCH-MIB devMFanStatus [....] devMPowerWorkStatus [..] devMPowerFanStatus [..] o Duration 1.1965s but on other under another S5800 48F4S with same firmware and S5850 48S6Q models I get the below ##### Module Start: sensors ##### o ENTITY-SENSOR-MIB o FS-SWITCH-MIB devMFanSpeed [] devMSlotEnvironmentValue [] temperCurrent [] voltageCurrent [] biasCurrent [] transpowerCurrent [] receivepowerCurrent [] o FS-SWITCH-MIB devMFanStatus [] devMPowerWorkStatus [] devMPowerFanStatus [] o Duration 7.4538s Regards Pieter Meyer Converged Group | Licensed ISP 0258/IECNS/JAN/09 75 Witkoppen Rd, North Riding, Gauteng, 2162 Office: +27 10 591 4600 | Mobile: +27 83 233 6614

2 2

question about REST API
by Farshid Abediny 13 Dec '19

13 Dec '19

Hello, we have in mind to purchase observium professional version and use REST API so i want to know can we read total traffic , inbound and outbound traffic value for every port by REST API ? because as i read REST API documents and i think we can have graph by rest api , so i will appericate if help me. Thank you.

1 0

not getting cpu cores and network interfaces
by cody＠mail-server.cc 13 Dec '19

13 Dec '19

Hi, I have some servers where i only get one cpu graph instead the cores listed where the Temperatur sensors showing 12 cores - there are two six-core Intel Xeon X5675 cpu's inside. Also i do not get any network interfaces fetched: ##### Module Start: ports ##### o Caching OIDs ifDescr ifAlias ifName ifType ifOperStatus o Caching DB 0 ports o Discovering ports o Duration 30.2533s There are two onboard 1G and two onboard 10G nic's and a additional dual-port 1G nic card inside. Also the inventory option does not show up. SNMP is configured the same as on all the other servers, running Debian 10 on them. I have two other Servers with Debian 7 and Intel Xeon X3360 showing all the cores, nic's and inventory. Thanks, Cody

2 1

High CPU alarm
by Daniel Johansson 12 Dec '19

12 Dec '19

Hi I have a synology nas with 1CPU and 4 cores in it. Whenever 1 core gets a shitload to do I get a CPU high alarm although it's not the combined cpu load that is high. Is there something I can do in the alarm checker to combine the cpu loads of all cores and trigger an alarm when all 4 combined is over for example 80% load? Regards Daniel

3 7

Adjust thresholds
by Luis Londoño 11 Dec '19

11 Dec '19

Is there any way to adjust the thresholds of alerts in observium? I have a few alerts that don´t seem to be an actual alert, a couple of them seem to almost be bad readings. Screenshot below. These are from HP 2920 Switches.

2 1

svn: E155036: Please see the 'svn upgrade' command
by Ross [Eve IT] 05 Dec '19

05 Dec '19

Hi there, We have the subscription version of Observium and have been running a batch script for a while. It was working for a while, and we let it be, a little too long! I just tried a manual upgrade. And got this, I'm sure any developer who uses svn, git, etc.. probably knows what this is, I don't :( Linux dude 4.9.0-11-amd64 #1 SMP Debian 4.9.189-3+deb9u2 (2019-11-11) x86_64 GNU/Linux This is what we were using to upgrade Observium. cd /opt/observium svn update ./discovery.php -u :/opt/observium# svn update svn: E155036: Please see the 'svn upgrade' command svn: E155036: The working copy at '/opt/observium' is too old (format 10) to work with client version '1.9.5 (r1770682)' (expects format 31). You need to upgrade the working copy first. /root/scripts/observiumupdate.sh svn: E155036: Please see the 'svn upgrade' command svn: E155036: The working copy at '/opt/observium' is too old (format 10) to work with client version '1.9.5 (r1770682)' (expects format 31). You need to upgrade the working copy first. ___ _ _ / _ \ | |__ ___ ___ _ __ __ __(_) _ _ _ __ ___ | | | || '_ \ / __| / _ \| '__|\ \ / /| || | | || '_ ` _ \ | |_| || |_) |\__ \| __/| | \ V / | || |_| || | | | | | \___/ |_.__/ |___/ \___||_| \_/ |_| \__,_||_| |_| |_| Observium Professional 19.8.9989 http://www.observium.org -- Database is up to date. There is a newer revision of Observium available! Version 19.10.10076 (5th December 2019) is 87 revisions ahead. Yikes, we are a little behind. By the way, still works perfectly ;) Any assistance is greatly appreciated thanks. Cheers, Ross.

2 2

GUI not loading after OS update
by Mohammed Kokani 04 Dec '19

04 Dec '19

Dear Experts, I have performed the OS upgrade on observium system from Ubuntu 16.04 to 18.04 with no other update, it was just OS upgrade, after upgrade GUI is not loading properly and landing to php page, see the screenshot below. Appriciate your valuable inputs. [image: image.png] *Thanks & Regards* *Mohammed Suhail | System Engineer* *Tel : (415) 349-2100, Extn- 2139* PGP Fingerprint : 026B 6CEB CC08 152D 9372 0F51 DDFB 6758 6924 FBCC [image: cid:image016.png@01D321AA.4A00A6F0]

2 2

Transferring License to New Server
by Dinuka Jayamaha 03 Dec '19

03 Dec '19

Hello, I am in the process of migrating the on premise Observium instance to AWS. I want to setup the AWS instance and run it in parallel with the on premise instance for some time to make sure that there isn't issues with the new instance. Are we allowed to run the same license on two servers at the same time or is there another way of doing this without me having to buy another license just for this purpose. Thanks, Dinuka Jayamaha

3 3

Credential for the demo site?
by Robert Zeff 03 Dec '19

03 Dec '19

How can I obtain the login for http://demo.observium.org/ ? Thanks, -Robert

2 1

I am continuing to have issues with this config.php
by Dana Bostic 02 Dec '19

02 Dec '19

I have Active Directory authentication working but only for whatever group is "last in the list" for $config['auth_ldap_suffix']. I have a username in the OU "OUAdministrators" and another account in OU "ServerAdmin". If I comment out the line $config['auth_ldap_suffix'] = ",ou=OUAdministrators,ou=Users,ou=BCPUS,dc=mw,dc=na,dc=cat,dc=com"; and uncomment out //$config['auth_ldap_suffix'] = ",ou=ServerAdmin,ou=Users,ou=BCPUS,dc=mw,dc=na,dc=cat,dc=com"; then the account in OUAdministratos no longer can login and the one in ServerAdmin starts working. If I leave them both uncommented, then the one that is last in the list works. Is there a way to have users in two OUs be used to authenticate? $config['auth_ldap_prefix'] = "cn="; $config['auth_ldap_groupbase'] = "ou=HighSecurity,ou=Groups,ou=BCPUS,dc=mw,dc=na,dc=cat,dc=com"; $config['auth_ldap_suffix'] = ",ou=OUAdministrators,ou=Users,ou=BCPUS,dc=mw,dc=na,dc=cat,dc=com"; //$config['auth_ldap_group'] = "cn=BCPUS-Observium_access,ou=HighSecurity,ou=Groups,ou=BCPUS,dc=mw,dc=na,dc=cat,dc=com"; //$config['auth_ldap_suffix'] = ",ou=ServerAdmin,ou=Users,ou=BCPUS,dc=mw,dc=na,dc=cat,dc=com"; //$config['auth_ldap_suffix'] = ",ou=StandardSecurity,ou=Users,ou=BCPUS,dc=mw,dc=na,dc=cat,dc=com"; $config['auth_ldap_groupmembertype'] = "fulldn"; $config['auth_ldap_groupmemberattr'] = "member"; unset($config['auth_ldap_groups']); $config['auth_ldap_groups']['cn=BCPUS-Observium_admins,ou=HighSecurity,ou=Groups,ou=BCPUS,dc=mw,dc=na,dc=cat,dc=com']['level'] = 10; $config['auth_ldap_groups']['cn=BCPUS-Observium_access,ou=HighSecurity,ou=Groups,ou=BCPUS,dc=mw,dc=na,dc=cat,dc=com']['level'] = 5; [Telescope Separator] Dana Bostic Technology Specialist Caterpillar Inc. 954 NC 42 East, Clayton, NC 27527 email: bostic_dana_r(a)cat.com<mailto:bostic_dana_r@cat.com> | phone: 919-550-1260 Caterpillar: Confidential Green

1 0

Problems with Geolocation and static config of coordinates
by Daniel Johansson 02 Dec '19

02 Dec '19

Hi I have 1 site that does not show on the map even though I have cofigured it with static coordinates both via "Manual coordinates" option on the devices on that location and also tried creating a config line with the syslocation tag to put it on the same coordinates. $config['location_map']['Lulea'] = "65.5861680,22.1594800"; I can't understand why just this site has this problem and none of the other 50+ sites. Any ideas? /Daniel

3 3

Custom frontpage map
by Luca Sasdelli 02 Dec '19

02 Dec '19

Hello, is there any way to replace the frontpage geo map with a floor plan, where to place node flags with some co-ords? Thanks! Luca

1 0

Alert checkers - thresholds and grouping
by Andreas Kotowicz 29 Nov '19

29 Nov '19

Hi, I’m looking for pointers on how to implement alert checkers with the following requirements: (A) test condition: [ sensor_value greater @sensor_limit ] + buffer - the [ ] part itself works, but I need to add a buffer (offset) for some checks not to throw false positives - I’m aware of the delay option, but this doesn’t help in my case - spelling out something like "sensor_value greater @sensor_limit + 5” doesn’t work for me (B) aggregate / pool over devices -check a number of devices and only alert me if, eg. 5/10 are over specific criteria, e.g.: - check all internal PDU temperatures - if all sensor_value greater X --> alert - I know how to check each device individually: (device.device_id in 82|83|84|85|86|87|88|89|90|91|92|93|94|95|96|97|98|99 AND sensor.sensor_descr regexp internal) - how do I convert this into a “if true for all devices” statement? Lastly, I’m looking for documentation and examples on how to invoke scripts from alert checkers. The documentation appears to be quite sparse [1] in this regard. I’m especially interested on how to extract / grab additional data from observium (ie from other devices) if specify test conditions fail. cheers, Andreas [1] https://docs.observium.org/alerting_transports/

1 0

request: graph number of event/alert logs
by Henrik Aarfeldt 28 Nov '19

28 Nov '19

Hi, In the event/alert log, we have a list of all events/alerts (systemwide, on a single unit, group etc) Would be nice to visualize the count in a single graph. Then we can quickly spot the date/time, when a lot of events/alerts happened. Maybe it’s already there, but I just haven’t located it 😊 -- Best regards Henrik Aarfeldt Region Hovedstaden Center for IT, Medico & Telefoni (CIMT) 2100 København Ø

1 0

Used Memory showing negative value of charts
by Test Support 27 Nov '19

27 Nov '19

Hello, The obeservium is showing negative value for used memory (please see attachment). Is there any configuration changes can be made on the observim so that it shows the correct value Please let me know if any additional information needed. Thank you [image: Annotation 2019-11-27 114240.png]

2 1

API netscaler question
by Ármann Guðjónsson 24 Nov '19

24 Nov '19

Hi I'm trying to get info on the Load Balancer items from the API using the entity endpoint But failing Are the loadbalancer items accessible through the API ? Kær kveðja/Best regards ÁRMANN GUÐJÓNSSON Enterprise Network Architect IT Operations Reykjavík Airport 101 Reykjavík Iceland Tel: +354 50 50 736 armanng(a)icelandair.is<mailto:armanng@icelandair.is> www.icelandair.com [cid:image001.png@01D5A257.7E9E3690] Fyrirvari/Disclaimer<https://www.icelandair.com/support/terms-and-conditions/icelandair-email-di…> [Facebook]<https://www.facebook.com/Icelandair>[Twitter]<https://twitter.com/icelandair>[YouTube]<https://www.youtube.com/icelandair>

2 2

linux snmp ifindexes
by Edvinas Kairys 21 Nov '19

21 Nov '19

hello, Is there any linux snmp persistence workaround suitable for observium, and its plugins (for example, weathermap) to leave the same linux snmp if indexes after server reboot, etc ? Thank you

1 0

Is it possible to trigger alarm from eventlog text?
by Daniel Johansson 21 Nov '19

21 Nov '19

Hi I get this in the eventlog for 2 switches and I'm wondering if it's possible to create an alarm depending on what the text in the eventlog says: Te2/0/1 Interface Down: [ifOperStatus] 'up' -> 'down' Te2/0/1 Interface is no longer encrypted In this case I want to trigger an alarm when the text "Interface is no longer encrypted" comes and do a reset of the same alarm when the text "Interface is now encrypted" comes. Is this possible to do with the alarm system in Observium today or is it something that could be implemented? Not sure I can see in snmp if an interface is encrypted or not. I haven't seen anything when I have looked for it. We use macsec in this case. Regards Daniel

1 1

Re: [Observium] Observium have very partial WMI support
by Henrik Aarfeldt 20 Nov '19

20 Nov '19

Good news: SNMP is still supported on Windows server 2012, 2016 and 2019. -- Best regards Henrik Aarfeldt Region Hovedstaden Center for IT, Medico & Telefoni (CIMT) Fra: observium <observium-bounces(a)observium.org> På vegne af Nikolay Semov via observium Sendt: 18. november 2019 08:22 Til: observium(a)observium.org Cc: Nikolay Semov <nsemov(a)taxback.com> Emne: [Observium] Observium have very partial WMI support Hi, As You know, the obtainable information via WMI for Windows OSes is much more. And MS stopping SNMP support.. https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-s… Do You plan to implement full WMI support for Observium? This email is classified as External. Best regards, [http://www.taxback.com/Signatures/TBG_logo_new.gif] Nikolay Semov Senior Network Adm. [http://www.taxback.com/Signatures/spacer.gif] e-mail: nsemov(a)taxback.com<mailto:nsemov@taxback.com> phone: 1824 skype: von_zarovich [http://www.taxback.com/Signatures/spacer.gif] [http://www.taxback.com/Signatures/tree.gif]Please consider the environment before printing this email. Thank you. [http://www.taxback.com/Signatures/spacer.gif] [http://www.taxback.com/Signatures/spacer.gif] US Head Office 333 N. Michigan Ave Suite 2415 Chicago 60601 IL USA European Head Office 14 St. Stephens Green Dublin 2 Ireland [http://www.taxback.com/Signatures/spacer.gif] Office Locations Argentina China New Zealand Russia Thailand Australia Ireland Peru Slovakia Turkey Brazil Korea Poland South Africa United Kingdom Bulgaria Lithuania Romania Spain United States [http://www.taxback.com/Signatures/spacer.gif] This email is confidential and intended solely for the use of the individual to whom it is addressed. Any views or opinions presented are solely those of the author and do not necessarily represent those of Taxback. If you are not the intended recipient, be advised that you have received this email in error and that any use, dissemination, forwarding, printing, or copying of this email is strictly prohibited. If you have received this email in error please forward it to Taxback at info(a)taxback.com<mailto:info@taxback.com>.

2 1

Observium have very partial WMI support
by Nikolay Semov 18 Nov '19

18 Nov '19

Hi, As You know, the obtainable information via WMI for Windows OSes is much more. And MS stopping SNMP support.. https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-s… Do You plan to implement full WMI support for Observium? This email is classified as External. Best regards, [http://www.taxback.com/Signatures/TBG_logo_new.gif] Nikolay Semov Senior Network Adm. [http://www.taxback.com/Signatures/spacer.gif] e-mail: nsemov(a)taxback.com<mailto:nsemov@taxback.com> phone: 1824 skype: von_zarovich [http://www.taxback.com/Signatures/spacer.gif] [http://www.taxback.com/Signatures/tree.gif]Please consider the environment before printing this email. Thank you. [http://www.taxback.com/Signatures/spacer.gif] [http://www.taxback.com/Signatures/spacer.gif] US Head Office 333 N. Michigan Ave Suite 2415 Chicago 60601 IL USA European Head Office 14 St. Stephens Green Dublin 2 Ireland [http://www.taxback.com/Signatures/spacer.gif] Office Locations Argentina China New Zealand Russia Thailand Australia Ireland Peru Slovakia Turkey Brazil Korea Poland South Africa United Kingdom Bulgaria Lithuania Romania Spain United States [http://www.taxback.com/Signatures/spacer.gif] This email is confidential and intended solely for the use of the individual to whom it is addressed. Any views or opinions presented are solely those of the author and do not necessarily represent those of Taxback. If you are not the intended recipient, be advised that you have received this email in error and that any use, dissemination, forwarding, printing, or copying of this email is strictly prohibited. If you have received this email in error please forward it to Taxback at info(a)taxback.com<mailto:info@taxback.com>.

1 0

Custom OID´s
by Florez, Luis 17 Nov '19

17 Nov '19

Hi everyone, I have a big doubt with de Custom OID feature in Observium, I have recently installed the CE and work fine but in my network exist a satelital node with Hughes Technology, like virtual IPGWs, CDSCP, DNCC and other proprietary devices. My question is, can I add these devices for monitoring with the feature Custom OID in the subscription edition? I already have de MIBS from the vendor, but my boss want to be sure that paying the subscription we will be able to monitorize the node. I don't have too much experience with SNMP that's why I'm asking for your help. On other tools like PRTG or OpManager I was able to monitorized the node, but since Observium is too much affordable for our company and I really have a preference for the Observium web GUI. I would like to do this on Observium. Thanks in advance. Sorry for my poor english [Boldt] Luis Florez | Servicio para el Transporte de Información Operador Telepuerto Aristóbulo del Valle 1257 Piso 2° (C1295ADA) C.A.B.A, Buenos Aires, Argentina lflorez(a)boldt.com.ar<mailto:lflorez@boldt.com.ar> | Tel: 54.11.4309-5468

3 2

Parsing Ports
by Wissen, Tobias (EDV) 15 Nov '19

15 Nov '19

Is there any guidance on how to define one's own species? For example, I would like to have our labels defined as "upload" as core, and so on. Mit freundlichen Grüßen, Tobias Wissen

1 0

Trouble 3Com
by Arnoldo Vidal Bravo 13 Nov '19

13 Nov '19

In our institution, we still have 3Com 4500 and 3Com 4210 switches (poe and no poe). Is there any MIB to know that MAC is connected to a certain port? like an HP Procurve [image: image.png] -- Saluda cordialmente

1 0

svn.log
by Christian Eriksson 12 Nov '19

12 Nov '19

Hi, https://www.observium.org/svn.log does not show the latest changes anymore. It is nice to read the changelog before we upgrade our system Christian Eriksson Service Area Manager Advania, Network Operations

1 0

Juniper SRX3000/4000/5000 Session Graphs
by Milton Ngan 12 Nov '19

12 Nov '19

It looks like the SRX sessions graphs are kind of broken with the higher end SRX's that have multiple SPUs/FPCs. I saw there was a JIRA bug (OBS-2101<https://jira.observium.org/browse/OBS-2101>) opened a long time ago that observed the same issue. The way these are being graphs right now is via the generic graph module. But the logic to graph this correctly needs something a bit more custom. The code needs to iterate through all the available SPU's/FPC's, potentially on both nodes if it is a cluster, and graph all of the values. Each SPU/FPC has its own set of limits as well. I was wondering why some of my SRX's worked and some didn't. It turns out those that do not have an SPU in FPC 0 will fail to return any results. And those that do have an CPU in FPC 0 might be returning partial results because the other SPU's/FPC's are not being graphed. I have attached debug polls from an SRX4200 that works, and an SRX3600 that doesn't. The SRX4200 starts at FPC0, but the SRX3600 starts at FPC7, so the default index of 0 doesn't work here. Even if the code took the first item in the array, it would still be wrong because it needs to also consider FPC11 and FPC12, not to mention the corresponding FPC's on the second node of the cluster (indexes 33, 37 and 38).

1 0

changing default snmp timeout value
by Edvinas Kairys 11 Nov '19

11 Nov '19

Hello, How it's possible to change default SNMP timeout value ? in configuration file i see the file line is commented. Afaik the change should be done somewhere in net-snmp configuration, but i can't find where. Thank you.

2 1

unix apps (10162)
by Luca Sasdelli 11 Nov '19

11 Nov '19

Hello all, on a given debian machine the apache app doesn’t work; there are several tenths of similar servers here, and they’re showing apache infos without issues. The setup has been done like the others. Other apps on the same machine are fine (mysql and postfix), but no apache. Server-status is correct, readable even via links in localhost, and mod-status is enabled. Only seen issue is that, in the /usr/lib/observium_agent/scripts-enabled folder, an empty “Config” file appears just after observium_agent run. Any hint? Thanks and greets. Luca

1 0

Huge list of groups cannot be displayed with onMouseOver
by Thibault Richard 07 Nov '19

07 Nov '19

Hello, I'm using version 19.9.10036 which is the latest stable version I've defined a huge list of groups. It apparently creates a display bug with the onMouseOver function When the list is too huge, all the groups cannot be displayed This is not a blocking point because I can just click on the "Groups" symbol to have the full list . but this is annoying Best Regards Thibault

1 0

RRD folder space problem
by Edvinas Kairys 07 Nov '19

07 Nov '19

Hello, I noticed that Observium started to use up lots of storage space. From ~200Gb it started to use ~400Gbs. Found interested thing, that one device RRD folder tooks ~200GBs instead of ~4-5Gbs. I'm always running housekeeping scripts in cron: # Run housekeeping script daily for syslog, eventlog and alert log 13 5 * * * root /opt/observium/housekeeping.php -ysel >> /dev/null 2>&1 # Run housekeeping script daily for rrds, ports, orphaned entries in the database and performance data 47 4 * * * root /opt/observium/housekeeping.php -yrptib >> /dev/null 2>&1 But seems it doesnt help, and housekeeping log doesn't show errors. Could someone advice how to clear that files in RRD folder according to housekeeping settings which are here: infra [root@observ001prvitx logs]# cat /opt/observium/includes/defaults.inc.php | grep housekeep $config['housekeeping']['syslog']['age'] = '1M'; // Maximum age of syslog entries; 0 to disable $config['housekeeping']['eventlog']['age'] = '3M'; // Maximum age of event log entries; 0 to disable $config['housekeeping']['alertlog']['age'] = '3M'; // Maximum age of alert log entries; 0 to disable $config['housekeeping']['authlog']['age'] = '6M'; // Maximum age of authlog entries; 0 to disable $config['housekeeping']['inventory']['age'] = '1M'; // Maximum age of deleted inventory entries; 0 to disable $config['housekeeping']['deleted_ports']['age'] = '1M'; // Maximum age of deleted ports before automatically purging; 0 to disable $config['housekeeping']['rrd']['age'] = '2M'; // Maximum age of unused rrd files before automatically purging; 0 to disable $config['housekeeping']['rrd']['invalid'] = TRUE; // Delete .rrd files that are not valid RRD files (eg created with a full disk) afaik M = month ?

3 8

Observium HA setup
by Mohammed Kokani 06 Nov '19

06 Nov '19

Dear Observium Experts, Am new to Observium, we have requirement to setup Observium in HA using DRDB, Pacemaker/Heartbeat & Corosync. #DRBD for block level replication, in our case this will be /opt/observium mount point. # Pacemaker/Heartbeat & Corosync main used for virtual IP switch over and auto mount of /opt/observium if primary nodes fails. VM Configurations OS : Ubuntu 18.04 64bit vCPU : 6 vRAM : 16Gb OS Disk : 40Gb DRBD disk : 350Gb ( for /opt/observium ) Is the HA setup prescribed or using single VM is enough. Basically we want to avoid single point of failure when we implement observium in production. Suggestion from experts users are welcome and thanks in advance for your valuable time. *Thanks & Regards* *Mohammed Suhail | System Engineer* *Tel : (415) 349-2100, Extn- 2139* PGP Fingerprint : 026B 6CEB CC08 152D 9372 0F51 DDFB 6758 6924 FBCC [image: cid:image016.png@01D321AA.4A00A6F0]

2 3

SG300 IPv6
by Arnaud Launay 06 Nov '19

06 Nov '19

Hello, >From time to time, we have those messages in Observium eventlog: 2019-09-28 12:36:09 sg300-office Ip-addresses: 1 updated, 7 unchanged. 2019-09-28 12:36:09 sg300-office IP address changed: 2a01:ad42:8531:c422:2e36:f8ff:fe5e:49e2/64 -> 2a01:ad42:8531:c422:2e36:f8ff:fe5e:49e2/64 I see absolutely no difference between the two IPs... The IP itself is the one used by the switch, given automatically: Ipv6 Global Address Type 2a01:ad42:8531:c422:2e36:f8ff:fe5e:49e2/64 Autoconfig Could it be the autoconfig renew that seems to Observium to be a new IP ? (Observium Professional edition, Observium 19.8.10001 (stable)) Arnaud.

2 3

Proxmox intergration via unix agent
by Pieter Meyer 05 Nov '19

05 Nov '19

Hi Guys Im struggling to get the intergration to Proxmox to work, using the unix agent. I followed the below The telnet your_server 36602 commands are working https://docs.observium.org/unix_agent/ Regards Pieter Meyer Converged Group | Licensed ISP 0258/IECNS/JAN/09 75 Witkoppen Rd, North Riding, Gauteng, 2162 Office: +27 10 591 4600 | Mobile: +27 83 233 6614 <https://goo.gl/maps/WHe3soT1fHm> map | <http://www.convergedgroup.net/> website | <http://www.convergedgroup.net/blog/> company blog | <http://www.linkedin.com/company/converged-telecoms> linkedin CAUTION: This email and any attachments may contain information that is confidential and subject to legal privilege. If you are not the intended recipient, you must not read, use, disseminate, distribute or copy this email or any attachments. If you have received this email in error, please notify us immediately and erase this email and any attachments. Thank you. DISCLAIMER: To the maximum extent permitted by law, Converged Group is not liable (including in respect of negligence) for viruses or other defects or for changes made to this email or to any attachments. Before opening or using attachments, check them for viruses and other defects. The information contained in this document is confidential to the addressee and is not the view nor the official policy of Converged Group unless otherwise stated.

2 1

"remote ip changed" error while im logging into Observium.
by Edvinas Kairys 05 Nov '19

05 Nov '19

Hello, due to cookies problem i switched to rolling version, seems like cookies problem is gone, but sometimes i got "remote ip changed" error while im logging into Observium. Any suggestions ?

5 9

Re: [Observium] ipv6 links on device ports details page
by Pieter Meyer 05 Nov '19

05 Nov '19

I have already tried the below parameter in Global settings Regards Pieter Meyer Converged Group | Licensed ISP 0258/IECNS/JAN/09 75 Witkoppen Rd, North Riding, Gauteng, 2162 Office: +27 10 591 4600 | Mobile: +27 83 233 6614 <https://goo.gl/maps/WHe3soT1fHm> map | <http://www.convergedgroup.net/> website | <http://www.convergedgroup.net/blog/> company blog | <http://www.linkedin.com/company/converged-telecoms> linkedin CAUTION: This email and any attachments may contain information that is confidential and subject to legal privilege. If you are not the intended recipient, you must not read, use, disseminate, distribute or copy this email or any attachments. If you have received this email in error, please notify us immediately and erase this email and any attachments. Thank you. DISCLAIMER: To the maximum extent permitted by law, Converged Group is not liable (including in respect of negligence) for viruses or other defects or for changes made to this email or to any attachments. Before opening or using attachments, check them for viruses and other defects. The information contained in this document is confidential to the addressee and is not the view nor the official policy of Converged Group unless otherwise stated. From: Mike Stupalov [mailto:mike@stupalov.ru] Sent: Tuesday, 05 November 2019 11:06 To: Observium Cc: Pieter Meyer Subject: Re: [Observium] ipv6 links on device ports details page Please show screenshot with device IPv6 addresses (in Device -> Ports -> IPv6 addresses). Pieter Meyer via observium <observium(a)observium.org> 5 ноября 2019 г. 11:41:00 написал: Hi Guys We have recently seen big amount of IPv6 links on ports details page, how can this be removed Regards Pieter Meyer Converged Group | Licensed ISP 0258/IECNS/JAN/09 75 Witkoppen Rd, North Riding, Gauteng, 2162 Office: +27 10 591 4600 | Mobile: +27 83 233 6614 <https://goo.gl/maps/WHe3soT1fHm> map | <http://www.convergedgroup.net/> website | <http://www.convergedgroup.net/blog/> company blog | <http://www.linkedin.com/company/converged-telecoms> linkedin CAUTION: This email and any attachments may contain information that is confidential and subject to legal privilege. If you are not the intended recipient, you must not read, use, disseminate, distribute or copy this email or any attachments. If you have received this email in error, please notify us immediately and erase this email and any attachments. Thank you. DISCLAIMER: To the maximum extent permitted by law, Converged Group is not liable (including in respect of negligence) for viruses or other defects or for changes made to this email or to any attachments. Before opening or using attachments, check them for viruses and other defects. The information contained in this document is confidential to the addressee and is not the view nor the official policy of Converged Group unless otherwise stated. _______________________________________________ observium mailing list <mailto:observium%40observium.org> observium(a)observium.org <http://postman.memetic.org/cgi-bin/mailman/listinfo/observium> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 2

Re: [Observium] ipv6 links on device ports details page
by Pieter Meyer 05 Nov '19

05 Nov '19

Hi Please see below, there is allot of link-local, this was not there previously, how do I get rid of this? Regards Pieter Meyer Converged Group | Licensed ISP 0258/IECNS/JAN/09 75 Witkoppen Rd, North Riding, Gauteng, 2162 Office: +27 10 591 4600 | Mobile: +27 83 233 6614 <https://goo.gl/maps/WHe3soT1fHm> map | <http://www.convergedgroup.net/> website | <http://www.convergedgroup.net/blog/> company blog | <http://www.linkedin.com/company/converged-telecoms> linkedin CAUTION: This email and any attachments may contain information that is confidential and subject to legal privilege. If you are not the intended recipient, you must not read, use, disseminate, distribute or copy this email or any attachments. If you have received this email in error, please notify us immediately and erase this email and any attachments. Thank you. DISCLAIMER: To the maximum extent permitted by law, Converged Group is not liable (including in respect of negligence) for viruses or other defects or for changes made to this email or to any attachments. Before opening or using attachments, check them for viruses and other defects. The information contained in this document is confidential to the addressee and is not the view nor the official policy of Converged Group unless otherwise stated. From: Mike Stupalov [mailto:mike@stupalov.ru] Sent: Tuesday, 05 November 2019 11:06 To: Observium Cc: Pieter Meyer Subject: Re: [Observium] ipv6 links on device ports details page Please show screenshot with device IPv6 addresses (in Device -> Ports -> IPv6 addresses). Pieter Meyer via observium <observium(a)observium.org> 5 ноября 2019 г. 11:41:00 написал: Hi Guys We have recently seen big amount of IPv6 links on ports details page, how can this be removed Regards Pieter Meyer Converged Group | Licensed ISP 0258/IECNS/JAN/09 75 Witkoppen Rd, North Riding, Gauteng, 2162 Office: +27 10 591 4600 | Mobile: +27 83 233 6614 <https://goo.gl/maps/WHe3soT1fHm> map | <http://www.convergedgroup.net/> website | <http://www.convergedgroup.net/blog/> company blog | <http://www.linkedin.com/company/converged-telecoms> linkedin CAUTION: This email and any attachments may contain information that is confidential and subject to legal privilege. If you are not the intended recipient, you must not read, use, disseminate, distribute or copy this email or any attachments. If you have received this email in error, please notify us immediately and erase this email and any attachments. Thank you. DISCLAIMER: To the maximum extent permitted by law, Converged Group is not liable (including in respect of negligence) for viruses or other defects or for changes made to this email or to any attachments. Before opening or using attachments, check them for viruses and other defects. The information contained in this document is confidential to the addressee and is not the view nor the official policy of Converged Group unless otherwise stated. _______________________________________________ observium mailing list <mailto:observium%40observium.org> observium(a)observium.org <http://postman.memetic.org/cgi-bin/mailman/listinfo/observium> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

ipv6 links on device ports details page
by Pieter Meyer 05 Nov '19

05 Nov '19

Hi Guys We have recently seen big amount of IPv6 links on ports details page, how can this be removed Regards Pieter Meyer Converged Group | Licensed ISP 0258/IECNS/JAN/09 75 Witkoppen Rd, North Riding, Gauteng, 2162 Office: +27 10 591 4600 | Mobile: +27 83 233 6614 <https://goo.gl/maps/WHe3soT1fHm> map | <http://www.convergedgroup.net/> website | <http://www.convergedgroup.net/blog/> company blog | <http://www.linkedin.com/company/converged-telecoms> linkedin CAUTION: This email and any attachments may contain information that is confidential and subject to legal privilege. If you are not the intended recipient, you must not read, use, disseminate, distribute or copy this email or any attachments. If you have received this email in error, please notify us immediately and erase this email and any attachments. Thank you. DISCLAIMER: To the maximum extent permitted by law, Converged Group is not liable (including in respect of negligence) for viruses or other defects or for changes made to this email or to any attachments. Before opening or using attachments, check them for viruses and other defects. The information contained in this document is confidential to the addressee and is not the view nor the official policy of Converged Group unless otherwise stated.

1 0

Observium Enterprise Edition
by Ischer Etienne 04 Nov '19

04 Nov '19

Hello there, I'm using Observium Professional for quite a time now and I'm interested in the Enterprise edition, but I was not able to find the documentation about it. More precisely, the architecture considerations and how to migrate from professional edition. I would be grateful if someone can point me where I can find those informations. Thx a lot. Regards Etienne

2 1

Show value on graph when hovering over an item
by Luis Londoño 01 Nov '19

01 Nov '19

Would be helpful to be able to see the value of a point on a graph when hovering over it instead of having to look at the left axis and estimate what the value is.

1 0

Memory Info calculated wring for RHEL 7 Device
by Oberreiter Andreas 31 Oct '19

31 Oct '19

Hello all, I have a Red Head Enterprise Linux 7 Device for which the Free Memory is calculated wrong. (I think) All worked fine until 3 Weeks ago, now I get a wrong free memory value. The poller Module for Memopools reads: +-----------------+--------------------+-------+--------+--------+--------+--------+ | Label | Type | Index | Total | Used | Free | Perc | +-----------------+--------------------+-------+--------+--------+--------+--------+ | Virtual memory | HOST-RESOURCES-MIB | 3 | 47.5GB | 15.2GB | 32.3GB | 31.99% | | Memory buffers | HOST-RESOURCES-MIB | 6 | 15.5GB | 52.4MB | 15.4GB | 0.33% | | Swap space | HOST-RESOURCES-MIB | 10 | 32GB | 602MB | 31.4GB | 1.84% | | Physical Memory | UCD-SNMP-MIB | 0 | 15.5GB | 14.6GB | 912MB | 94.25% | +-----------------+--------------------+-------+--------+--------+--------+--------+ A free -m reads: total used free shared buff/cache available Mem: 15871 2629 884 8662 12357 4209 Swap: 32767 602 32165 Kind regards Mit freundlichen Grüßen Ing. Andreas Oberreiter (EDV) -- --- ÖBAU - Nadlinger --- Tel.: 02742/72042-79 Fax.: 02742/72042-7879 mailto:a.oberreiter@nadlinger.at www.nadlinger.at Impressum: Baumarkt Nadlinger Handelsges.m.b.H. Porschestraße 29 3100 St. Pölten Firmenbuch FN 89076 w, LG St. Pölten DVR: 835935 Tel.: +43 2742 72042 Fax.: +43 2742 72042 7800 E-Mail.: mailto:nadlinger@nadlinger.at

3 4

Mailer configuration
by Ray Poorman 25 Oct '19

25 Oct '19

Hello all, I have tried repeatedly configuring the mailer agent with limited success. The PHP “email” fails to send via hosts as the from address is not working, it ends up sending as root(a)observium.cstreet.local even if I set the from address. When I set it to use postfix/sendmail from localhost I can get emails to send, and the from address is correct, but then it uses an old hostname “devnew65” as the dns name, which gets it rejected. I have been able to get a couple through our local mail server but the outside gets rejected. I have tried using authentication and it just doesn’t work and is rejected before authentication even takes place due to it’s source ip / dns. Any advice? The debug doesn’t show the actual mailing process or the php command or I would just write a quick php script to test it. Ray -- Ray Poorman, CTO CSS Integration & Communications 1911 C St Bellingham WA 98225 360-671-4878

1 0

username in libvirt discovery
by Marcelo Roccasalva 24 Oct '19

24 Oct '19

Hi, Is there a way to include a username in ssh connection for virtual machines discovery? I have to use qemu+ssh://username@libvirt.host/system Thanks in advance, -- Marcelo "¿No será acaso que esta vida moderna está teniendo más de moderna que de vida?" (Mafalda)

1 0

Alert transports do not work any more
by Marco Spicuglia 22 Oct '19

22 Oct '19

Hey Guys, I had a fully functional Observium Enterprise installation up to last week, but no alerts are sent out any more today. The alerts log says my alert has been sent out, but this is not the case. If I check the postfix queue, the email related to that alert is stuck in the queue, as it's trying to send the message to who@where, which is obviously not correct. The contacts are still fine though, 4 in total. Our Telegram group also did not receive any message, which has nothing to do with email. I believe something broke in the transport system. Could anyone help to understand what is going on? It definitely did work before. Thanks in advance for your help. Regards, Marco

2 2

Custom Dashboards
by Daniel Johansson 22 Oct '19

22 Oct '19

Hi I just created a custom dashboard. Is it possible to set this one as a new default dashboard? And if that works, is it also possible to set specific custom dashboards / user? Regards Daniel

2 2

Alert checkers triggering on down/0 speed interfaces
by Ryan, Spencer 22 Oct '19

22 Oct '19

Since updating to 10134 we've seen some odd behavior out of our high interface utilization alerts. The alert itself is very simple, device matches *, entity is ifType equals ethernetCsmacd, and the test conditions are any of: ifInOctets_perc ge 80 ifOutOctets_perc ge 80 Which has worked fine forever. Now it's throwing alarms on an odd mix of devices (UBNT, Palo Alto, Arista, Kemp VLM, Infoblox) for ports that are down/down loopbacks or HA interfaces not connected. All of the ports it is alarming on show this in the data (Speed 0, and down/down): ifSpeed=>0 ifHighSpeed=>0 ifOperStatus=>down ifAdminStatus=>down Any idea what changed or why it's alarming on these now? I'm guessing its trying to do the 80% math on....0 but I'd imagine that shouldn't even run if the port is admin+operationally down. This is a mgmt interface on an arista (which is unconnected and admin down): https://pastebin.com/JsNvre40 As you can see the *_perc calcs are 0, it almost seems some kind of divide by 0 error. Thanks in advance! Spencer Ryan | Senior Systems Administrator | spencer.ryan(a)netscout.com<mailto:spencer.ryan@netscout.com> Arbor Networks | The security division of NETSCOUT +1.734.794.5033 (d) | +1.734.846.2053 (m) www.arbornetworks.com<http://www.arbornetworks.com/>

7 8

Errors in DB.log / No RRD Graphs more
by Wissen, Tobias (EDV) 22 Oct '19

22 Oct '19

Hi there, i gor several errors in the db.log obs@observium:/opt/observium/logs$ tail db.log [2019/10/18 12:16:24 +0200] poller.php(3286): Failed dbQuery (#1146 - Table 'observium.lsp' doesn't exist), Query: SELECT * FROM `lsp` WHERE `device_id` = '7' [2019/10/18 12:16:24 +0200] poller.php(3255): Failed dbQuery (#1146 - Table 'observium.lsp' doesn't exist), Query: SELECT * FROM `lsp` WHERE `device_id` = '18' [2019/10/18 12:16:24 +0200] poller.php(3344): Failed dbQuery (#1146 - Table 'observium.lsp' doesn't exist), Query: SELECT * FROM `lsp` WHERE `device_id` = '6' [2019/10/18 12:16:24 +0200] poller.php(3080): Failed dbQuery (#1146 - Table 'observium.lsp' doesn't exist), Query: SELECT * FROM `lsp` WHERE `device_id` = '10' [2019/10/18 12:16:25 +0200] poller.php(3151): Failed dbQuery (#1146 - Table 'observium.lsp' doesn't exist), Query: SELECT * FROM `lsp` WHERE `device_id` = '13' [2019/10/18 12:16:25 +0200] poller.php(3254): Failed dbQuery (#1146 - Table 'observium.lsp' doesn't exist), Query: SELECT * FROM `lsp` WHERE `device_id` = '17' [2019/10/18 12:16:25 +0200] poller.php(3158): Failed dbQuery (#1146 - Table 'observium.lsp' doesn't exist), Query: SELECT * FROM `lsp` WHERE `device_id` = '12' [2019/10/18 12:16:25 +0200] poller.php(3193): Failed dbQuery (#1146 - Table 'observium.lsp' doesn't exist), Query: SELECT * FROM `lsp` WHERE `device_id` = '11' [2019/10/18 12:16:25 +0200] poller.php(3253): Failed dbQuery (#1146 - Table 'observium.lsp' doesn't exist), Query: SELECT * FROM `lsp` WHERE `device_id` = '14' [2019/10/18 12:16:27 +0200] poller.php(3109): Failed dbQuery (#1146 - Table 'observium.lsp' doesn't exist), Query: SELECT * FROM `lsp` WHERE `device_id` = '15' AND: I got no RRD Graphs no longer. [cid:image001.png@01D585AE.6878F960] [cid:image002.png@01D585AE.6878F960] [...] [cid:image003.png@01D585AE.6878F960] Can somebody help? Mit freundlichen Grüßen Tobias Wissen

3 3

False Positive Alert if sensor_value is "NULL" / "FALSE"
by Klimek, Denis 21 Oct '19

21 Oct '19

Hey all, is there any way to check with an alert condition if the return value for i.e. is "NULL" and/or "FALSE"? I have the case that we removed SFP+ transceivers from Extreme devices and the device is now not replying with any value for this OID check. The SQL database contains "0.00000" for the affected sensor. My current alert looks like: https://pastebin.com/f17b9gfW Example Alert (Web View): https://ibb.co/pfP27KD Mit freundlichem Gruß Stadtwerke Norderstedt Denis Klimek Carrier Manager & Professional Network Engineer IP-Systemtechnik Tel: +49 (0) 40 / 521 04 - 1049 dklimek(a)stadtwerke-norderstedt.de<mailto:dklimek@stadtwerke-norderstedt.de> www.stadtwerke-norderstedt.de<http://www.stadtwerke-norderstedt.de/>

2 3

Too many ports on a windows workstation
by Gianpaolo Racca 20 Oct '19

20 Oct '19

Hi everybody, I searched the docs for some hints about my problem but I didn't find anything. I'm very new to observium. I installed it in a docker container on a linux nas and I'm very happy with it. The main concern is that on a windows workstation (a nuc box) I have a LOT of interfaces listed: a lot of ethernet, a lot of tunnel interfaces. The other machines I monitor which are linux (computer or raspberry) don't show the same behaviour. Can you please point me in the right direction? Thanks and have a nice day, Gianpaolo

2 1

Fix for random logout
by Niklas Larsson 18 Oct '19

18 Oct '19

Hi, I spent some time figuring out why I got randomly logged out from the webpage and submitted a patch to https://jira.observium.org/browse/OBS-3132 Basically it was the session_regenerate_id() call that caused it, so I adopted the https://www.php.net/manual/en/function.session-regenerate-id.php suggested way. Well it works for me, try it out if you have the same issue. /niklas

3 4

Failure in notification of syslog alerts of the Ob server itself
by Shekhar Basnet 17 Oct '19

17 Oct '19

Hello, Observium is setup to email syslog alerts and it is doing so without any issues of all devices. I have a requirement to email some log alerts of the Observium server to the network team. I did the usual stuff of adding syslog rule and associating with a contact address. The logs (/var/log/messages) are matched by this syslog rule. I can see those matched lines in the Ob GUI. Yet strangely, an email is never triggered. Initially I thought it could be due to the log message and so I tried matching some other log lines, but always the log messages are matched by the syslog rule but email is never triggered. The contact address gets emails of all other alerts. Is there some other settings to enable Observium to email logs of it's own? Am running rsyslog and postfix on the Ob server. [root@observium sbasnet]# rsyslogd -v rsyslogd 8.24.0-34.el7, compiled with: PLATFORM: x86_64-redhat-linux-gnu PLATFORM (lsb_release -d): FEATURE_REGEXP: Yes GSSAPI Kerberos 5 support: Yes FEATURE_DEBUG (debug build, slow code): No 32bit Atomic operations supported: Yes 64bit Atomic operations supported: Yes memory allocator: system default Runtime Instrumentation (slow code): No uuid support: Yes Number of Bits in RainerScript integers: 64 [root@observium sbasnet]# postconf mail_version mail_version = 2.10.1 *Observium CE* 19.8.10000 (22nd August 2019) *OS* Linux 3.10.0-862.11.6.el7.x86_64 [amd64] (CentOS 7) *Apache* 2.4.6 (CentOS) OpenSSL/1.0.2k-fips mod_fcgid/2.3.9 PHP/5.6.40 mod_perl/2.0.10 Perl/v5.16.3 *PHP* 5.6.40 (OPcache: ENABLED) *Python* 2.7.5 *MySQL* 5.5.60-MariaDB (extension: mysqli 5.5.60-MariaDB) *SNMP* NET-SNMP 5.7.2 *RRDtool* 1.4.8 *Fping* 3.10 (IPv4 only) Thanks for help. Shekhar -- DISCLAIMER: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized use or disclosure is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message. IRS CIRCULAR 230 DISCLOSURE: Any U.S. tax advice contained in this communication (including any attachments) is not intended or written to be used, and cannot be used, for the purpose of (i) avoiding penalties under the Internal Revenue Code or (ii) promoting, marketing or recommending to another party any transaction or matter addressed herein.(FR08-i203d)

1 0

Kohler generator issue
by Tony Guadagno 15 Oct '19

15 Oct '19

Hi, a while ago you added support for the Kohler Generators. (thanks). I am noticing some issues. 1. The generator is listed as in “alarm status” all the time, no matter whats going on with the generator 2. When the generator goes under load, the observium state does not change to reflect that. I have attached 2 screen shots to illustrate as well as a txt file with the corresponding snmpwalk outputs. Also, Kohler has updated the mib, I have attached that as well, can you update the code base with this? thanks Tony

2 1

Tiny diff (adding probes)
by Aaron Finney 15 Oct '19

15 Oct '19

Hello maintainer friends, I'm not sure the proper protocol to request merging of small added bits, but I added two additional nprobe plugins, check_haproxy and check_ldap, to my install. The diff for probes.inc.php is below, but it also required a small modification to the check_ldap perl script (update hard-coded module dir). The LDAP probe I used is the version in the nagios-probe-contrib package Debian package, not the compiled C version distributed via the plugins tarfile from nagios.org; I used it because the contrib/perl version allows anonymous binding for just a basic service health check and doesn't require user/pwd/base-DN. Aaron Index: includes/definitions/entities/probes.inc.php =================================================================== --- includes/definitions/entities/probes.inc.php (revision 10122) +++ includes/definitions/entities/probes.inc.php (working copy) @@ -58,6 +58,11 @@ $config['probes'][$probe]['descr'] = 'Tests FTP connections'; $config['probes'][$probe]['args']['default'] = "-H %hostname%"; +$probe = 'check_haproxy'; +$config['probes'][$probe]['enable'] = 1; +$config['probes'][$probe]['descr'] = 'Tests HAProxy health by parsing the stats page'; +$config['probes'][$probe]['args']['default'] = "-H %hostname%"; + $probe = 'check_imap'; $config['probes'][$probe]['enable'] = 1; $config['probes'][$probe]['descr'] = 'Tests IMAP connections'; @@ -68,6 +73,11 @@ $config['probes'][$probe]['descr'] = 'Tests Jabber connections'; $config['probes'][$probe]['args']['default'] = "-H %hostname%"; +$probe = 'check_ldap'; +$config['probes'][$probe]['enable'] = 1; +$config['probes'][$probe]['descr'] = 'Tests LDAP/LDAPS connections'; +$config['probes'][$probe]['args']['default'] = "-H %hostname%"; + $probe = 'check_nntp'; $config['probes'][$probe]['enable'] = 1; $config['probes'][$probe]['descr'] = 'Tests NNTP connections'; -- *Aaron Finney*Infrastructure Engineering | OpenX 888 East Walnut Street, 2nd Floor | Pasadena, CA 91101 o: +1 (626) 466-1141 x6035 | aaron.finney(a)openx.com

2 1

Mass Changes Ports Config (Alerting)
by Wissen, Tobias (EDV) 15 Oct '19

15 Oct '19

Hello, is there a way to set the alerts for all ports centrally to (ignore alerts) true? Would you like to set the alerts separately for each device in a later step. [cid:image001.png@01D58365.30219360] Mit freundlichen Grüßen Tobias Wissen

2 1

cookies error
by Edvinas Kairys 15 Oct '19

15 Oct '19

Hello, After last stable update we're getting cookies error when entering the observium fronted page. After cookies deletion it starts to work, but only for some time. Is there any information to prevent this from happening ? "redirected you too many times. Try clearing your cookies <https://support.google.com/chrome?p=rl_error&hl=en-US>."

8 19

Strange poller/graph behavior with Palo Alto
by Aaron Finney 13 Oct '19

13 Oct '19

Heya Adam et al, I'm trying to help the corp side of the house monitor a handful of Palo Alto firewalls (3220s/850s) using Observium, and am seeing the gptunnels and sessions graphs being alternately added/deleted each run. Example: ##### firewall.spaghetti.foo.baz [55] completed poller modules at > 2019-10-13 09:07:03 ##### > o Graphs [checked] availability, ping, ping_snmp, uptime, fanspeed, > temperature, processor, mempool, storage, bits, hr_users, poller_perf, > pollersnmp_count,pollersnmp_times, > pollersnmp_errors_count, pollersnmp_errors_times, pollerdb_count, > pollerdb_times,pollermemory_perf > o Graphs [added] panos_sessions, panos_gptunnels > o Poller time 5.6106 seconds > o Updated Data uptime, last_polled, last_polled_timetaken, > device_state and the very next run: ##### firewall.spaghetti.foo.baz [55] completed poller modules at > 2019-10-13 09:07:31 ##### > o Graphs [deleted] panos_sessions, panos_gptunnels > o Graphs [checked] availability, ping, ping_snmp, uptime, fanspeed, > temperature, processor, mempool, storage, bits, hr_users, poller_perf, > pollersnmp_count,pollersnmp_times, > pollersnmp_errors_count, pollersnmp_errors_times, pollerdb_count, > pollerdb_times,pollermemory_perf > o Poller time 5.6037 seconds > o Updated Data uptime, last_polled, last_polled_timetaken, > device_state This pattern repeats ad inifitum - any ideas? Aaron

2 3

automated backup from all configs?
by Farshid Abediny 13 Oct '19

13 Oct '19

Hello, I want to know is there any way to have FTP schedule backup from observium from all configs? RRD, Database, Rancid, ... ?

1 0

disable verify peer for smtp
by Farshid Abediny 12 Oct '19

12 Oct '19

Hello, is there anyway that disable verify peer for smtp option in php ? because when we have tls with self signed certificate php mailer can not connect to our servers. Thanks

3 2

Alerting on custom application values
by Phillip Weller 11 Oct '19

11 Oct '19

Greetings All, Can you set an alert on a value imported from a custom application? E.g, if I’m tracking the %CPU and %Memory of a specific application on a linux host, can I set an alert check on something like cpu greater 50? All graphs are working fine. I know the values are being received by Observium. But its not clear to me what the entity, or even the entity type, would be. Thanks! Regards, Phil Weller

2 1

Changing graph colours to improve readability
by Chris Tomkins 11 Oct '19

11 Oct '19

Hi, I sent this to the list last week but I'm 99% sure it bounced. Apologies if anyone has already seen it. ---- I'm just wondering, has anyone dabbled with getting rrdtool to use more contrasting colours for composite graphs? We have some graphs, such as peering graphs, that are made up of 15+ components, and each component is currently a nearly identical shade of green or purple, which means that even with the legend enabled it is very difficult to see which component is which. I'm imagining that instead of using shades of green, you could use a rainbow of very distinctly different colours and readability would improve. I'm interested to hear whether anyone has tried to do this before, or if it's a non-starter for some reason. Thanks, Chris -- Chris Tomkins | Senior Network Engineer (Linux/Network) christ(a)brandwatch.com Office: +44 (0)1273 448 949 NEW YORK | BOSTON | BRIGHTON | LONDON | BERLIN | STUTTGART | PARIS | SINGAPORE | SYDNEY <https://www.brandwatch.com/blog/digital-consumer-intelligence/>

2 2

error in svn
by Edvinas Kairys 10 Oct '19

10 Oct '19

Hello, I can't switch to rolling version. I got this type of error. [observium]# svn switch https://svn.observium.org/svn/observium/trunk svn: E155025: 'http://svn.observium.org/svn/observium/branches/stable' is not the same repository as 'https://svn.observium.org/svn'

5 4

hdarray script enhancement
by Attila Nagy 09 Oct '19

09 Oct '19

Hi everyone! We would like to slightly enhance the Unix agent hdarray script (which provides infos about the local RAID controllers). Actually we would like to add support for some HP controllers, but to make things simpler we would need some nice output from the script. So if some of you have some RAID controllers supported by this script would you mind sharing some output of this script? Thanks, Tylla

5 7

Parent Devices
by Luis Piña 09 Oct '19

09 Oct '19

Hello, I am trying to make an Alert for a Parent Device, but I need the sons devices doesn´t alert. I doi have an nt know how to say, but example. If a had a switch alerted, I don´t want an Alert of the devices connected to it. Tnks

3 3

r9999 | mike | 2019-08-21 14:08:57 +0000 (Wed, 21 Aug 2019) | 4 lines
by Jacek.Dabrowski＠selgros.pl 07 Oct '19

07 Oct '19

Hello, I see support for Delta UPS, does this include DELTA -RT Series UPS? I have a few and it doesn't work --------------------------------------------------------------------------------------------------------- >From changelog: r9999 | mike | 2019-08-21 14:08:57 +0000 (Wed, 21 Aug 2019) | 4 lines Improved support for Delta UPS, added Delta mib files. Small code cleanup before stable. -------------------------------------------------------------------------------------------------------- Pozdrawiam Jacek Dąbrowski

5 7

Saving changes to a large number of sensors
by Robert Williams 07 Oct '19

07 Oct '19

Hi, It seems that on a couple of Cisco ASR9k devices (with exceptionally large counts of sensors) we are now unable to save changes to them. Specifically, setting custom values and enabling or disabling alerts for individual sensors. Now, I remember that during Observium setup (a _long_ time ago) there was a step for amending either PHP or MySQL to allow a very long POST or query or something, which is required when you update a page with hundreds of boxes and buttons on it. I’m assuming either these devices have grown to the point where this setting is no longer adequately large, or perhaps the setting on the server has been inadvertently changed. Either way – I literally cannot remember (or find) the damn setting anywhere. Can someone remind me what it is please? Thanks! Robert Williams Custodian Data Centres https://www.CustodianDC.com

1 0

unsubscribe
by Erimer, Tarkan 07 Oct '19

07 Oct '19

1 0

Reset interface graph after upgrade the router
by Laszlo Nemeth 03 Oct '19

03 Oct '19

Hello, I upgraded our Cisco ASR router, and after the upgrade all of ports graphs cleared, so at this moment i have 4 interfaces with 2 days old graphs. I think port ID or something similar things are changed. So now i have 4 files that not touched in the last 2 days: port-19.rrd port-20.rrd port-21.rrd port-3.rrd I think this is the 4 missed graphs. The question is: how can i figure out which rrd means witch interface? From the database or somehow? If i can pair the old rrd and the new rrd i can merge them i think but at this moment i missed the traffic graphs in the last 3 years :) Thanks Laszlo -- László Németh Senior Network Engineer [emarsys]<http://www.emarsys.com/> Emarsys-Technologies Kft Kossuth Lajos utca 7-9. II. emelet 1053 Budapest T: +36 1 781 6001<tel:+36%201%20781%206001> E: laszlo.nemeth(a)emarsys.com<mailto:laszlo.nemeth@emarsys.com> W: www.emarsys.com<http://www.emarsys.com> » Get the latest insight from Emarsys<http://emarsys.com/en/resources/whitepapers/> This email and any attachments contain confidential information for the intended recipient to which it has been addressed. This information may not be copied nor disclosed to any third party without prior permission of the sender. If you are not the intended recipient, or if received in error, please contact the sender immediately and delete this email from your system. emarsys eMarketing Systems AG does not accept responsibility for losses and any other damages resulting from information, including viruses and other harmful content, contained in this email and any attachments.

3 2

Changing graph colours to improve readability
by Brandwatch NOC 02 Oct '19

02 Oct '19

Hi, I'm just wondering, has anyone dabbled with getting rrdtool to use more contrasting colours for composite graphs? We have some graphs, such as peering graphs, that are made up of 15+ components, and each component is currently a nearly identical shade of green or purple, which means that even with the legend enabled it is very difficult to see which component is which. I'm imagining that instead of using shades of green, you could use a rainbow of very distinctly different colours and readability would improve. I'm interested to hear whether anyone has tried to do this before, or if it's a non-starter for some reason. Thanks, Chris -- Chris Tomkins | Senior Network Engineer (Linux/Network) christ(a)brandwatch.com Office: +44 (0)1273 448 949 NEW YORK | BOSTON | BRIGHTON | LONDON | BERLIN | STUTTGART | PARIS | SINGAPORE | SYDNEY <https://www.brandwatch.com/blog/digital-consumer-intelligence/>

1 0

SMTP Settings
by Lierman, Andrew 30 Sep '19

30 Sep '19

What and where do I need to configure in Observium for SMTP settings so that I can receive email alerts? Any mail application better mail vs sendmail? I setup email settings in the config.php but I never receive an email. Thanks, -- *Confidentiality Notice:* This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. The views expressed in this transmission are not necessarily the views of the School District of Altoona.

3 3

I was able to run my svn update before, but cannot anymore.
by Dana Bostic 27 Sep '19

27 Sep '19

I am looking for suggestions. When I run: svn co http://svn.observium.org/svn/observium/branches/stable observium it just sits there. I am behind a proxy and was able to do two updates in the past, but cannot anymore for some reason. I have verified my settings for the proxy (in ~/.subversion/servers). I would believe that was the issue, but they have not changed since a few months ago when I last updated. I thought it might be authentication issues, so I went to http://svn.observium.org/svn/observium/branches/stable and can use my username and password to get in, works fine. I have removed all authentication (from /root/.subversion/auth) and put in my username and password again at the prompt, still it just sits there. Any suggetions? [Telescope Separator] Dana Bostic Technology Specialist Caterpillar Inc. 954 NC 42 East, Clayton, NC 27527 email: bostic_dana_r(a)cat.com<mailto:bostic_dana_r@cat.com> | phone: 919-550-1260 Caterpillar: Confidential Green

2 1

Rename Ports in OBS
by Wissen, Tobias (EDV) 27 Sep '19

27 Sep '19

Hi, is it possible to rename Ports in OBS? I don´t have the possibility to connect to the device. Mit freundlichen Grüßen Tobias Wissen BERDING BETON GmbH Verwaltung Steinfeld * EDV * Industriestr. 6 * 49439 Steinfeld Tel: 05492 87 290 * Mobil: 0151-14823618 * Fax: 05492 87 295 * E-Mail: t.wissen(a)berdingbeton.de<mailto:t.wissen@berdingbeton.de> Gf: Georg Berding sen., Georg Berding jun., Matthias Hansen, Gert Waltermann * Sitz: 49439 Steinfeld * Registergericht AG Oldenburg: HRB 110334 * USt-ID-Nr.: DE 811247624 * Der Inhalt dieser E-Mail kann vertrauliche und/oder rechtlich geschützte Informationen enthalten und ist ausschließlich für den bezeichneten Adressaten bestimmt. Wenn Sie nicht der vorgesehene Adressat dieser E-Mail oder dessen Vertreter sein sollten, informieren Sie bitte den Absender und löschen Sie die E-Mail. Das unerlaubte Kopieren, Veröffentlichen sowie die unbefugte Weitergabe ist nicht gestattet. ________________________________

1 0

Observium Cisco MIB
by Lierman, Andrew 26 Sep '19

26 Sep '19

I found this MIB on the Observium MIB list, I noticed it was not part of my Observium install. Is there a way to make a part of it? I have some voice routers that I want to monitor. https://mibs.observium.org/mib/CISCO-POP-MGMT-MIB/ -- *Confidentiality Notice:* This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. The views expressed in this transmission are not necessarily the views of the School District of Altoona.

2 5

Unset Locations
by Wissen, Tobias (EDV) 26 Sep '19

26 Sep '19

Hi, in the Locations @Nav-Bar is shoiwn, that there are 2 devices. [cid:image001.png@01D573B8.3C240D30] But when let me show it, there are none [cid:image002.png@01D573B8.94D80760] Mit freundlichen Grüßen Tobias Wissen BERDING BETON GmbH Verwaltung Steinfeld * EDV * Industriestr. 6 * 49439 Steinfeld Tel: 05492 87 290 * Mobil: 0151-14823618 * Fax: 05492 87 295 * E-Mail: t.wissen(a)berdingbeton.de<mailto:t.wissen@berdingbeton.de> Gf: Georg Berding sen., Georg Berding jun., Matthias Hansen, Gert Waltermann * Sitz: 49439 Steinfeld * Registergericht AG Oldenburg: HRB 110334 * USt-ID-Nr.: DE 811247624 * Der Inhalt dieser E-Mail kann vertrauliche und/oder rechtlich geschützte Informationen enthalten und ist ausschließlich für den bezeichneten Adressaten bestimmt. Wenn Sie nicht der vorgesehene Adressat dieser E-Mail oder dessen Vertreter sein sollten, informieren Sie bitte den Absender und löschen Sie die E-Mail. Das unerlaubte Kopieren, Veröffentlichen sowie die unbefugte Weitergabe ist nicht gestattet. ________________________________

2 1

Juniper routing instances
by Peter Derissen 26 Sep '19

26 Sep '19

Hi, Will this be addressed in the future? https://jira.observium.org/browse/OBS-66 Kinds regards, Met vriendelijke groet, Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [EF-logo_rood_RGB -handtekening]<http://www.eurofiber.nl/> Volg ons op Twitter<https://twitter.com/Eurofiber> | Linkedin<https://www.linkedin.com/company/eurofiber> | Youtube<https://www.youtube.com/user/Eurofibergroup> ******** IMPORTANT NOTICE ******** This e-mail (including any attachments) may contain information that is confidential or otherwise protected from disclosure and it is intended only for the addressees. If you are not the intended recipient, please note that any copying, distribution or other use of information contained in this e-mail (and its attachments) is not allowed. If you have received this e-mail in error, kindly notify us immediately by telephone or e-mail and delete the message (including any attachments) from your system. Please note that e-mail messages may contain computer viruses or other defects, may not be accurately replicated on other systems, or may be subject of unauthorized interception or other interference without the knowledge of sender or recipient. Eurofiber only sends and receives e-mails on the basis that Eurofiber is not responsible for any such computer viruses, corruption or other interference or any consequences thereof. Eurofiber Nederland B.V. is registered in the Chamber of Commerce of Amsterdam with number 34134377, VAT number NL 8088.51.524 B01. Eurofiber N.V. has its registered office at Belgicastraat 5 bus 7, 1930 Zaventem and is registered under national number 0435.204.851.

2 3

incorrect uptimes shown
by Pieter Meyer 25 Sep '19

25 Sep '19

Hi We have observed that the wrong uptime are shown by Obsevium see below example, I have seen >From SSH shell @storage01:~# uptime 07:23:42 up 818 days, 15:34, 1 user, load average: 0.37, 0.46, 0.43 >From observium Linux storage01 3.2.0-4-amd64 #1 SMP Debian 3.2.88-1 x86_64 Hardware Generic x86 [64bit] Operating system Linux 3.2.0-4-amd64 System name storage01 Contact Converged Telecoms isp(a)convergedgroup.net Location Isando, JHB, South Africa Load average 0.35, 0.51, 0.43 Uptime 1 year, 54 days, 8h 8m 31s Last reboot 2018-08-01 23:13:34 In another place on a netgear M4300 stack it show more uptime than what is actually up for. >From switch System Up time 61 days 7 hrs 25 mins 56 secs >From observium Vendor/Hardware Netgear M4300-24X24F Operating system Netgear Managed Switch (FastPath) 12.0.2.15 (QOS IP Multicast IPv6 Stacking) System name edge1.converged.local Location Isando, Johannesburg, South Africa Serial 4G52687G80066 Uptime 268 days, 12h 35m 33s Last reboot 2018-12-30 18:44:30 Regards Pieter Meyer

2 1

HP PDU cosmetic bug
by Laszlo Nemeth 24 Sep '19

24 Sep '19

Hello, I am happy that the Observium can monitoring the our HP PDUs too! But i found a cosmetic problem. Here is what the PDU shows: [cid:part1.B3B09EA5.D2E13E98@emarsys.com] And what the Observium (9906) shows me: [cid:part2.3649AB3C.D055B67A@emarsys.com] So the "Total Load Feed" looks like need to divide by 10. If the mouse is over the "Power" green value (that is now 2.59kW) the popup shows me: "Normal state 64.31685344686dBm" There is any option to shows the segments too not just the summarized power feed ? (like Load Segment 1..6) Thanks Laszlo

3 7

Mixed authentication (subscribed version)
by FRANKS, Andy (SHREWSBURY AND TELFORD HOSPITAL NHS TRUST) 23 Sep '19

23 Sep '19

Hi all, I don't suppose there's any plans to do a "mixed authentication" feature? We'd like to provide granular access to customer's devices, but centralise all our logins via radius which seemingly can't provide granular access; I can log users in with a '1' permission level, but then I would need to permit access to certain devices, which I can't do since there's no DB-side record of their user id. I see lots of systems which contain an internal database of user IDs matching an external authentication mechanism which then contain the granular bits but don't think Observium does anything like this atm? Maybe even a fallback of "radius,mysql" if we expressly denied the radius auth first? Thanks Andy ******************************************************************************************************************** This message may contain confidential information. If you are not the intended recipient please inform the sender that you have received the message in error before deleting it. Please do not disclose, copy or distribute information in this e-mail or take any action in relation to its contents. To do so is strictly prohibited and may be unlawful. Thank you for your co-operation. NHSmail is the secure email and directory service available for all NHS staff in England and Scotland. NHSmail is approved for exchanging patient data and other sensitive information with NHSmail and other accredited email services. For more information and to find out how you can switch, https://portal.nhs.net/help/joiningnhsmail

1 0

Are 802.1ag or Y.1731 monitored?
by Adam Thompson 23 Sep '19

23 Sep '19

I’ll be deploying some switches Real Soon Now that will be running 802.1ag / MEF OAM-CFM / Y.1731 protocols to get fine-grained as-measured QoS data about the underlying carrier. Is any of that monitored automatically by Observium? Specifically, I’m referring to the counters found in IEEE8021-CFM-MIB and MEF-SOAM-PM-MIB. I’ll be running a small enough number of Management Domains (in IEEE/MEF/ITU-speak) that I can do custom graphs if I have to… but it would sure be nice to not have to! Thanks, -Adam Adam Thompson Consultant, Infrastructure Services [[MERLIN LOGO]]<https://www.merlin.mb.ca/> 100 - 135 Innovation Drive Winnipeg, MB, R3T 6A8 (204) 977-6824 or 1-800-430-6404 (MB only) athompson(a)merlin.mb.ca<mailto:athompson@merlin.mb.ca> www.merlin.mb.ca<http://www.merlin.mb.ca/>

1 0

504 Gateway Time-out
by Wissen, Tobias (EDV) 23 Sep '19

23 Sep '19

Hi there, since today, i get an 504 by adding new hosts. Can anybody give me an advice oft he reason? [cid:image001.png@01D571ED.88CA8820] Mit freundlichen Grüßen Tobias Wissen BERDING BETON GmbH Verwaltung Steinfeld * EDV * Industriestr. 6 * 49439 Steinfeld Tel: 05492 87 290 * Mobil: 0151-14823618 * Fax: 05492 87 295 * E-Mail: t.wissen(a)berdingbeton.de<mailto:t.wissen@berdingbeton.de> Gf: Georg Berding sen., Georg Berding jun., Matthias Hansen, Gert Waltermann * Sitz: 49439 Steinfeld * Registergericht AG Oldenburg: HRB 110334 * USt-ID-Nr.: DE 811247624 * Der Inhalt dieser E-Mail kann vertrauliche und/oder rechtlich geschützte Informationen enthalten und ist ausschließlich für den bezeichneten Adressaten bestimmt. Wenn Sie nicht der vorgesehene Adressat dieser E-Mail oder dessen Vertreter sein sollten, informieren Sie bitte den Absender und löschen Sie die E-Mail. Das unerlaubte Kopieren, Veröffentlichen sowie die unbefugte Weitergabe ist nicht gestattet. ________________________________

1 1

RRD / Graphs
by Wissen, Tobias (EDV) 23 Sep '19

23 Sep '19

How do you do? maybe somebody can help me. since a few days I have the problem that he doesn't create graphs for me anymore. Can somebody tell me what to control to make it work again ? [cid:image001.png@01D56F00.2311A620] Mit freundlichen Grüßen Tobias Wissen

2 5

Question about Cisco 3650 CPU polling
by Svensson Fredrik A 19 Sep '19

19 Sep '19

Hello! Cisco has big problems with 3650 with severalt bugs with high utilization of CPU and memory-leaks. Unfortunally this problem with CPU isnt seen in Observium. The graph is showing the output from sh cpu platform, stable at 49-50% for example: CPU utilization for five seconds: 48%, one minute: 49%, five minutes: 49% Core 0: CPU utilization for five seconds: 50%, one minute: 49%, five minutes: 49% Core 1: CPU utilization for five seconds: 48%, one minute: 51%, five minutes: 49% Core 2: CPU utilization for five seconds: 47%, one minute: 47%, five minutes: 49% Core 3: CPU utilization for five seconds: 49%, one minute: 48%, five minutes: 49% In the meantime we have extreamly high cpu sh processes cpu CPU utilization for five seconds: 95%/29%; one minute: 96%; five minutes: 96% The High cpu causes at least that the device is alerting as down since it cant answer snmp-polling. Is this fixable so we can get alerts from high CPU? Regards Fredrik Svensson Från: observium [mailto:observium-bounces@observium.org] För Laszlo Nemeth via observium Skickat: den 18 september 2019 14:34 Till: Observium <observium(a)observium.org> Kopia: Laszlo Nemeth <lnemeth(a)emarsys.com> Ämne: [Observium] dashboard - alert status widget slider missed Hello In the latest version (r10023 - but may be it was never worked) the Alert status widget does not contain slider on the right side if the alerts are more than it fit to the widget's size. Added a picture where You can see the slider is present in the right side of the Status warning widget but missed in the Alert Status widget. The right table shows that there are more alerts than shows the widget. I use Firefox 69.0. [cid:image001.png@01D56EC2.9ADB1EE0] Thanks Laszlo

2 1

API question
by Serghei Golipad 19 Sep '19

19 Sep '19

Hi Guys, Has anyone got an issue with API, ports in particular not returning any data (devices/alerts and everything else does): uk1soc-hopoff01:~$ curl -u username:password http://10.200.252.10/api/v0/ports uk1soc-hopoff01:~$ If I provide port ID, it does return a response. This is on rolling release 10029 Thank you PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

1 0

dashboard - alert status widget slider missed
by Laszlo Nemeth 18 Sep '19

18 Sep '19

Hello In the latest version (r10023 - but may be it was never worked) the Alert status widget does not contain slider on the right side if the alerts are more than it fit to the widget's size. Added a picture where You can see the slider is present in the right side of the Status warning widget but missed in the Alert Status widget. The right table shows that there are more alerts than shows the widget. I use Firefox 69.0. [cid:part1.39F92109.995BC4D9@emarsys.com] Thanks Laszlo

1 0

Observium alert checker - polling when devices are unresponsive
by Benedikt Sveinsson 17 Sep '19

17 Sep '19

Hi, I'm trying to create an alert for ports which have an egress percentage over 80%. It's creating false positives for devices that are down during the poll which makes the alert logging report I'm trying to generate rather useless (see a screenshot of the Alert checker below) I tried putting device_status eq 1 into the Test Conditions and requiring all conditions, if I do that, an alert is never generated [cid:image001.png@01D56D44.F618ECD0] What is the best way to achieve this? Kind regards,

2 1

Is there plans to add more severity levels than critical
by Ármann Guðjónsson 13 Sep '19

13 Sep '19

Hi I have seen this question before but I can't find the answer. Do you have plans to implement other security levels that critical for example: info, warning, error , critical Kær kveðja/Best regards ÁRMANN GUÐJÓNSSON Enterprise Network Architect IT Operations Reykjavík Airport 101 Reykjavík Iceland Tel: +354 50 50 736 armanng(a)icelandair.is<mailto:armanng@icelandair.is> www.icelandair.com [cid:image001.png@01D569C4.1881E490] Fyrirvari/Disclaimer<https://www.icelandair.com/support/terms-and-conditions/icelandair-email-di…> [Facebook]<https://www.facebook.com/Icelandair>[Twitter]<https://twitter.com/icelandair>[YouTube]<https://www.youtube.com/icelandair>

4 4

port parsing and port descriptions
by Kenneth Friend II 13 Sep '19

13 Sep '19

I'm admittedly quite the gimp when it comes to Linux and Observium, but I'm learning little by little. I have a custom port group setup to view my VMware network ports (port name / description=VMWare:SomePort). Several of these links are actually aggregated. In the HP/Aruba world they are Trunks. As far as I know, I cannot throw a description on a virtual port / trunk in HP-land. I wonder, is there a way, without being a PHP-guru to add a particular port to a custom port group when I'm unable to provide a port description? If not, that might be a neat feature at some point. Very Respectfully, Kenneth R. Friend II Sr. Systems Administrator Sonnax Transmission Company, Inc. 2 Imtec Lane, Bellows Falls, VT 05101 USA * www.sonnax.com<http://www.sonnax.com/> ken.friend(a)sonnax.com<mailto:ken.friend@sonnax.com> * (802) 463-0287 * (802) 463-9722 ________________________________ CONFIDENTIALITY NOTICE: This e-mail transmission, and any documents, files or previous e-mail message attached to it may contain confidential and proprietary material for the sole use of the intended recipient (s). Do not read this e-mail if you are not the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient) you are hereby notified that any disclosure, copying, distribution or use of any of the information contained in or attached to this transmission is STRICTLY PROHIBITED and you should delete all copies of this message and its attachments without reading or saving in any manner.

2 1

Custom polling interval for a device group
by Thomas Stather 10 Sep '19

10 Sep '19

Hi We are using Observium Professional: 19.6.9946 (rolling) Interval for polling: 5 minutes I have the issue that some of our network equipment (HPE gear) generates false-positives frequently. It is marked as down, then at the next polling cycle up again. Is it possible to define a custom polling cycle (i.e. 2 minute) for a certain device match (i.e. "device.type in network")? Then, i could generate an alert checker for this with the "Delay" set to 1, so that these devices are scanned every 2 minutes, but only if they are down 2 polling cycles in a row, an alert is generated. Or how can i fix this issue otherwise? Best, Thomas -- Thomas Stather IT Services VCP4, VCP6-DCV, VCP6.5-DCV Tel: +49 6221 486 628 Fax: +49 6221 486 561

1 0

6500 Sensors
by Robert Williams 10 Sep '19

10 Sep '19

Hi, After no issues for ages, rather like busses, these things seem to come along at the same time!... Following a svn up earlier today to ensure we had the latest version (for a storage/snmp issue) - we now seem to have gained some sensors which are in alarm state on every single 6500 chassis. I have a really vague memory of hitting this before, like many years ago, but can't quite put my finger on it. It seems to be picking up all these new sensors (which is fine) - but one of them (clock 2 'clock-inuse') should probably be considered "false=happy" and "true=alert" - (because that means clock 1 has failed). If it helps, the new ones are all within ENTITY-SENSOR-MIB as shown above (and not CISCO-ENTITY-SENSOR-MIB which are the original ones). Some are also duplicates it seems. So, is it possible to flip the true/false alert-ness around for this Clock 2 one? Cheers! Robert Williams Custodian Data Centres https://www.CustodianDC.com

2 2

"Three months" graph annoyance
by Attila Nagy 09 Sep '19

09 Sep '19

Hi all! Is there an option to change the graph for the "Three Months" view to use the same logic to display the X axis labels as the "One Month" graph - "DoW Day Month" instead of "Week XX"? Rationale: Any metric's "Three Months" view shows the graph with the x-axis showing the week number. We find this kinda annoying, as while keeping account of and shuffling around the time, day, month, year is easy, handling the number of current week is awkward. At least here in Hungary the week number - while it is used in some places (like lottery results) -, it is mostly unused, only an interesting fact in a calendar. Thank you in advance. Best regards, Tylla

2 1

Ubuntu Storage
by Robert Williams 09 Sep '19

09 Sep '19

Hi, Only just started looking into this, but it seems that all Ubuntu 18.04 hosts which auto-update have pulled snmpd up to 5.7.3+dfsg-1.8ubuntu3.2 (from ubuntu3.1) are now no longer providing 'any' of their storage info under hrStorageEntry # /usr/bin/snmpbulkwalk -t '5' -r '3' -v2c -c *** -Pud -OQUs -m HOST-RESOURCES-MIB:HOST-RESOURCES-TYPES -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'target-device':'161' hrStorageEntry hrStorageEntry = No Such Object available on this agent at this OID But - after a restart of SNMPD service on the target-device, the expected response returns correctly: hrStorageIndex.1 = 1 hrStorageIndex.3 = 3 hrStorageIndex.6 = 6 hrStorageIndex.7 = 7 hrStorageIndex.8 = 8 hrStorageIndex.10 = 10 hrStorageType.1 = hrStorageRam hrStorageType.3 = hrStorageVirtualMemory hrStorageType.6 = hrStorageOther hrStorageType.7 = hrStorageOther hrStorageType.8 = hrStorageOther <...> HOWEVER - a re-discovery and poll of the device by Observium kills it immediately, and it goes back to: hrStorageEntry = No Such Object available on this agent at this OID It has impacted every 18.04 device we have which auto-updates. Anyone else seen this? Robert Williams Custodian Data Centres https://www.CustodianDC.com

2 2

DB Error
by Jacek.Dabrowski＠selgros.pl 07 Sep '19

07 Sep '19

Hello, Yesterday I turned off Observium after turning on the message DB Error 1040 appears, which I can do with it ??? [cid:image001.jpg@01D5617C.C2F25CC0] Pozdrawiam Jacek Dąbrowski

6 14

svn log
by Christian Eriksson 04 Sep '19

04 Sep '19

https://www.observium.org/svn.log doesn't seem to update anymore /Christian

1 0

Email alerts:
by Farhan Razzak 03 Sep '19

03 Sep '19

Hi, Anyone aware of any known issues with email alerts as seems to be out of service for months. Test shows ok but none received? admin@observium:/opt/observium$ php test_alert.php -c 2 Observium 19.7.9962 Test Alert Notification o Notifying [email] [OK] Kind regards, Farhan Razzak The information transmitted in and with this email is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Statements and opinions expressed in this e-mail may not represent those of the Company. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender immediately and delete the material from any computer. Please also note, Vaioni filter incoming email for spam and inappropriate words. Unfortunately this does mean that sometimes genuine messages can be filtered out. Although we take measures to recover such messages, it must not be assumed that an email has been received by us and important communications should always be followed up by a phone call, fax or printed copy.

1 0

Google map not working properly after upgrade CE 19.8.10000
by CONNECTOS - Fabio R. Kochhann 30 Aug '19

30 Aug '19

Hi. After upgrading my CE version from 18.9.9420 to 19.8.10000, the map view in the dashboard stopped working with the google-mc api. I have tried some settings in the config.php file, but to no avail. Can anyone tell me if they no longer have support for the google map or if there is another way to configure? <http://www.connectos.com.br>

2 1

question about Notification Modification
by Young, Jay 30 Aug '19

30 Aug '19

Hello, We have been using Observium for a couple of months now at our location, and it is working well.. The engineers have had one request though. The notifications that are being sent out have the hostname of the device but not the IP Address. Unfortunately, our network devices are not DNS (we are working to correct that), and to work around the issue, I have been updating the host file on the Observium server as I add devices. The notifications go out with the hostname, but not the IP, so the engineers have to hunt for the IP when they receive them. I have dug through the documentation, and have not been able to find/figure out a way of including the IP Address of the device with the notification (I have probably missed it). Can anyone assist me in adding that to the notifications? (or at least point me in the right direction) Thanks in advance for any assistance that is given -jay Jay Young Network Engineer RRH Information Services & Technology Rochester Regional Health 585-922-1051 jay.young(a)rochesterregional.org<mailto:jay.young@rochesterregional.org> Rochester Regional Health Email Disclaimer This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please delete it from your system. This footnote also confirms that this email message has been swept for the presence of computer viruses. [http://www.myrochealth.com/wp-content/uploads/rrh-logo.jpg]

2 1

Upgrade to 19.8.10000 weirdness
by Ryan Huff 29 Aug '19

29 Aug '19

I upgraded to 19.8.10000 (CE) and some how the alert contacts got goofed up. I had two webhooks when I upgraded (followed all the steps on the website to upgrade the CE and also ran discovery.php -u) and now, the "transport" selection list (for adding a new contact) is all goofed up (devnull... etc) and missing several transport types. Any thoughts would be helpful.. [cid:d8d538b7-1653-43c6-9d49-a6e842541dd7]

2 5

Add new EnvironmentSensor
by Steffen Klemer 27 Aug '19

27 Aug '19

Hey guys, we recently acquired new temperature sensors with these MIBs http://www.networktechinc.com/download/d-environment-monitor-micro.html and wanted to ask if they could be added to observium? (I already use 'custom OID' in the meantime :) ). A sample walk would be % snmpwalk -v2c -M nti -c COMMUNITY HOST iso.3.6.1.4.1.3699.1.1.12 iso.3.6.1.4.1.3699.1.1.12.1.1.1.1.1.1 = INTEGER: 1 iso.3.6.1.4.1.3699.1.1.12.1.1.1.1.1.2 = INTEGER: 2 iso.3.6.1.4.1.3699.1.1.12.1.1.1.1.1.3 = INTEGER: 3 iso.3.6.1.4.1.3699.1.1.12.1.1.1.1.2.1 = INTEGER: 1 iso.3.6.1.4.1.3699.1.1.12.1.1.1.1.2.2 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.1.1.1.2.3 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.1.1.1.3.1 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.1.1.1.3.2 = STRING: "Humidity" iso.3.6.1.4.1.3699.1.1.12.1.1.1.1.3.3 = STRING: "Dew Point" iso.3.6.1.4.1.3699.1.1.12.1.1.1.1.4.1 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.1.1.1.4.2 = INTEGER: -2147483648 iso.3.6.1.4.1.3699.1.1.12.1.1.1.1.4.3 = INTEGER: -2147483648 iso.3.6.1.4.1.3699.1.1.12.1.1.1.1.5.1 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.1.1.1.5.2 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.1.1.1.5.3 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.1.1 = INTEGER: 1 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.1.2 = INTEGER: 2 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.1.3 = INTEGER: 3 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.1.4 = INTEGER: 4 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.1.5 = INTEGER: 5 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.1.6 = INTEGER: 6 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.1.7 = INTEGER: 7 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.1.8 = INTEGER: 8 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.1.9 = INTEGER: 9 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.1.10 = INTEGER: 10 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.1.11 = INTEGER: 11 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.1.12 = INTEGER: 12 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.1.13 = INTEGER: 13 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.1.14 = INTEGER: 14 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.1.15 = INTEGER: 15 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.1.16 = INTEGER: 16 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.1.17 = INTEGER: 17 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.1.18 = INTEGER: 18 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.1.19 = INTEGER: 19 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.1.20 = INTEGER: 20 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.1.21 = INTEGER: 21 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.1.22 = INTEGER: 22 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.1.23 = INTEGER: 23 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.1.24 = INTEGER: 24 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.2.1 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.2.2 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.2.3 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.2.4 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.2.5 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.2.6 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.2.7 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.2.8 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.2.9 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.2.10 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.2.11 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.2.12 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.2.13 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.2.14 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.2.15 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.2.16 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.2.17 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.2.18 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.2.19 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.2.20 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.2.21 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.2.22 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.2.23 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.2.24 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.3.1 = STRING: "Temperature #1" iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.3.2 = STRING: "Humidity #1" iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.3.3 = STRING: "Dew Point #1" iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.3.4 = STRING: "Temperature #2" iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.3.5 = STRING: "Humidity #2" iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.3.6 = STRING: "Dew Point #2" iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.3.7 = "" iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.3.8 = "" iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.3.9 = "" iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.3.10 = "" iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.3.11 = "" iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.3.12 = "" iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.3.13 = "" iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.3.14 = "" iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.3.15 = "" iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.3.16 = "" iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.3.17 = "" iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.3.18 = "" iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.3.19 = "" iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.3.20 = "" iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.3.21 = "" iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.3.22 = "" iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.3.23 = "" iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.3.24 = "" iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.4.1 = INTEGER: -2147483648 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.4.2 = INTEGER: -2147483648 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.4.3 = INTEGER: -2147483648 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.4.4 = INTEGER: -2147483648 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.4.5 = INTEGER: -2147483648 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.4.6 = INTEGER: -2147483648 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.4.7 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.4.8 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.4.9 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.4.10 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.4.11 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.4.12 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.4.13 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.4.14 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.4.15 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.4.16 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.4.17 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.4.18 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.4.19 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.4.20 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.4.21 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.4.22 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.4.23 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.4.24 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.5.1 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.5.2 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.5.3 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.5.4 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.5.5 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.5.6 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.5.7 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.5.8 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.5.9 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.5.10 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.5.11 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.5.12 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.5.13 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.5.14 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.5.15 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.5.16 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.5.17 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.5.18 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.5.19 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.5.20 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.5.21 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.5.22 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.5.23 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.2.1.1.5.24 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.3.1.1.1.1 = INTEGER: 1 iso.3.6.1.4.1.3699.1.1.12.1.3.1.1.1.2 = INTEGER: 2 iso.3.6.1.4.1.3699.1.1.12.1.3.1.1.2.1 = STRING: "Digital Input #1" iso.3.6.1.4.1.3699.1.1.12.1.3.1.1.2.2 = STRING: "Digital Input #2" iso.3.6.1.4.1.3699.1.1.12.1.3.1.1.3.1 = INTEGER: 1 iso.3.6.1.4.1.3699.1.1.12.1.3.1.1.3.2 = INTEGER: 1 iso.3.6.1.4.1.3699.1.1.12.1.4.1.1.1.1 = INTEGER: 1 iso.3.6.1.4.1.3699.1.1.12.1.4.1.1.1.2 = INTEGER: 2 iso.3.6.1.4.1.3699.1.1.12.1.4.1.1.1.3 = INTEGER: 3 iso.3.6.1.4.1.3699.1.1.12.1.4.1.1.1.4 = INTEGER: 4 iso.3.6.1.4.1.3699.1.1.12.1.4.1.1.2.1 = "" iso.3.6.1.4.1.3699.1.1.12.1.4.1.1.2.2 = "" iso.3.6.1.4.1.3699.1.1.12.1.4.1.1.2.3 = "" iso.3.6.1.4.1.3699.1.1.12.1.4.1.1.2.4 = "" iso.3.6.1.4.1.3699.1.1.12.1.4.1.1.3.1 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.4.1.1.3.2 = INTEGER: 130 iso.3.6.1.4.1.3699.1.1.12.1.4.1.1.3.3 = INTEGER: 190 iso.3.6.1.4.1.3699.1.1.12.1.4.1.1.3.4 = INTEGER: 201 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.1.1 = INTEGER: 1 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.1.2 = INTEGER: 2 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.1.3 = INTEGER: 3 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.1.4 = INTEGER: 4 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.1.5 = INTEGER: 5 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.1.6 = INTEGER: 6 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.1.7 = INTEGER: 7 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.1.8 = INTEGER: 8 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.1.9 = INTEGER: 9 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.1.10 = INTEGER: 10 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.1.11 = INTEGER: 11 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.1.12 = INTEGER: 12 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.1.13 = INTEGER: 13 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.1.14 = INTEGER: 14 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.1.15 = INTEGER: 15 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.1.16 = INTEGER: 16 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.1.17 = INTEGER: 17 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.1.18 = INTEGER: 18 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.1.19 = INTEGER: 19 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.1.20 = INTEGER: 20 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.1.21 = INTEGER: 21 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.1.22 = INTEGER: 22 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.1.23 = INTEGER: 23 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.1.24 = INTEGER: 24 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.1.25 = INTEGER: 25 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.1.26 = INTEGER: 26 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.1.27 = INTEGER: 27 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.1.28 = INTEGER: 28 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.1.29 = INTEGER: 29 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.1.30 = INTEGER: 30 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.1.31 = INTEGER: 31 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.1.32 = INTEGER: 32 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.2.1 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.2.2 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.2.3 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.2.4 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.2.5 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.2.6 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.2.7 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.2.8 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.2.9 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.2.10 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.2.11 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.2.12 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.2.13 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.2.14 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.2.15 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.2.16 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.2.17 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.2.18 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.2.19 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.2.20 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.2.21 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.2.22 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.2.23 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.2.24 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.2.25 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.2.26 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.2.27 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.2.28 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.2.29 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.2.30 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.2.31 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.2.32 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.3.1 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.3.2 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.3.3 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.3.4 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.3.5 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.3.6 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.3.7 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.3.8 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.3.9 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.3.10 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.3.11 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.3.12 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.3.13 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.3.14 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.3.15 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.3.16 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.3.17 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.3.18 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.3.19 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.3.20 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.3.21 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.3.22 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.3.23 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.3.24 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.3.25 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.3.26 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.3.27 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.3.28 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.3.29 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.3.30 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.3.31 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.3.32 = STRING: "Temperature" iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.4.1 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.4.2 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.4.3 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.4.4 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.4.5 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.4.6 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.4.7 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.4.8 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.4.9 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.4.10 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.4.11 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.4.12 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.4.13 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.4.14 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.4.15 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.4.16 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.4.17 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.4.18 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.4.19 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.4.20 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.4.21 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.4.22 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.4.23 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.4.24 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.4.25 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.4.26 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.4.27 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.4.28 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.4.29 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.4.30 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.4.31 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.4.32 = INTEGER: 264 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.5.1 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.5.2 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.5.3 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.5.4 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.5.5 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.5.6 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.5.7 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.5.8 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.5.9 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.5.10 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.5.11 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.5.12 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.5.13 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.5.14 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.5.15 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.5.16 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.5.17 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.5.18 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.5.19 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.5.20 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.5.21 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.5.22 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.5.23 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.5.24 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.5.25 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.5.26 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.5.27 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.5.28 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.5.29 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.5.30 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.5.31 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.5.32 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.6.1 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.6.2 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.6.3 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.6.4 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.6.5 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.6.6 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.6.7 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.6.8 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.6.9 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.6.10 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.6.11 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.6.12 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.6.13 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.6.14 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.6.15 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.6.16 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.6.17 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.6.18 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.6.19 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.6.20 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.6.21 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.6.22 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.6.23 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.6.24 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.6.25 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.6.26 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.6.27 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.6.28 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.6.29 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.6.30 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.6.31 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.6.32 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.7.1 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.7.2 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.7.3 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.7.4 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.7.5 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.7.6 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.7.7 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.7.8 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.7.9 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.7.10 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.7.11 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.7.12 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.7.13 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.7.14 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.7.15 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.7.16 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.7.17 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.7.18 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.7.19 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.7.20 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.7.21 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.7.22 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.7.23 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.7.24 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.7.25 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.7.26 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.7.27 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.7.28 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.7.29 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.7.30 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.7.31 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.5.1.1.7.32 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.6.1.1.1.1 = INTEGER: 1 iso.3.6.1.4.1.3699.1.1.12.1.6.1.1.2.1 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.1.6.1.1.3.1 = INTEGER: 0 iso.3.6.1.4.1.3699.1.1.12.100.1.0.1.0 = NULL iso.3.6.1.4.1.3699.1.1.12.100.1.0.1.0 = No more variables left in this MIB View (It is past the end of the MIB tree) /Steffen -- Steffen Klemer E-Mail: steffen.klemer(a)gwdg.de Tel: +49 551 201 2170 ------------------------------------------------------------------ GWDG - Gesellschaft für wissenschaftliche Datenverarbeitung mbH Göttingen Am Faßberg 11, 37077 Göttingen Service-Hotline: Tel: +49 551 201-1523 E-Mail: support(a)gwdg.de Kontakt: Tel: 0551 201-1510 Fax: 0551 201-2150 E-Mail: gwdg(a)gwdg.de WWW: https://www.gwdg.de ------------------------------------------------------------------ Geschäftsführer: Prof. Dr. Ramin Yahyapour Aufsichtsratsvorsitzender: Prof. Dr. Christian Griesinger Sitz der Gesellschaft: Göttingen Registergericht: Göttingen, Handelsregister-Nr. B 598 ------------------------------------------------------------------ Zertifiziert nach ISO 9001 ------------------------------------------------------------------

2 2

Cisco IE-1000
by Jorgo Schmitz 26 Aug '19

26 Aug '19

Hello all, I have a question regarding Cisco IE-1000-4P2S-LM switch. With following specs: Image : ie1000-universalk9-mz.spa.1.8.0.bin Version : 1.8.0 Chipset ID : VSC7428 Board Type : IE-1000-4P2S-LM Port Count : 6 Product : Cisco IE1000 Switch Code Revision : f61c61e+ Is it a supported device by observium? Because observium does not seem to be recognize the device correctly. It is also does not recognized as Cisco. Does anyone has any idea how to resolve this? Kind regards, Jorgo Schmitz Senior Engineer [cid:image001.png@01D558D6.C5712570]<https://korton.nl/>

3 4

Observium CE 19.8 Release
by adama＠observium.org 24 Aug '19

24 Aug '19

We've just released the new version of Observium CE, 19.8. This release is based on SVN revision 10000 and includes 580 separate commits covering ~50k changed lines of code since the previous release. Upgrade instructions are at https://www.observium.org/docs/updating/#upgrade-to-latest-major-release Changelog is at https://www.observium.org/svn.log Thanks, Adam.

1 0

Cisco SLA Alerts
by Benjamin Moore 21 Aug '19

21 Aug '19

Does anyone have an example Cisco SLA Alert Check configuration they can share? -- Benjamin Moore

1 0

Delta UPS
by Heisch, David 15 Aug '19

15 Aug '19

Dear List, I use the current CE edition on Debian 8.11 and try to add the following UPS device: Delta GES602R212035 RT Seires On-line 6 KVA UPS-Software-Version 04 AgentSoftware 01.12.18I sysDescr: UPS SNMP Agent sysObjectID: .1.3.6.1.4.1.2254.2.5 The discovery groups this device as OS Type generic and OS Group unix. Is this device not supported? Any support would be appreciated. Kind Regards David

3 2

Graph from Media servers
by Manu E S 12 Aug '19

12 Aug '19

Hello We are using media servers to channel delivery , we need to monitor our channels from this Do you support channels monitoring? Media servers will provide APIs -- *Manu E S* LINUX SYSTEM ENGINEER Stream Republic Ltd m: +91 9747978817 e: manu(a)streamrepublic.com <akbar(a)streamrepublic.com> Skype: manues50 WhatsApp: +91 9747978817 The information contained in this communication, including attachments, is confidential and intended only for the exclusive use of the addressee. If the reader of this message is not the intended recipient, or the employee or agent responsible for delivering it to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us by telephone immediately. Thank you.

1 0

adaptec monitoring
by Farshid Abediny 10 Aug '19

10 Aug '19

Hello, i saw in mib.observium.com it support adaptec raid controller but in community edition there is no MIB for that and i have manually add it in /opt/observium/mibs , so finally comunity edition does not support adaptec MIB ? or is there anyway do it manually? THank you.

1 0

snmpwalk performance
by Greg Peterson 08 Aug '19

08 Aug '19

I'm having a problem polling my high capacity devices. The following command can take up to 18 minutes to complete due to the number and interfaces. The command is /usr/bin/snmpwalk -v2c -c 'XXXXX' -Pu -OQUs -m IF-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'x.x.x.x':'161' ifEntry. Do the pro or enterprise versions change the way they poll devices? Are there configuration setting I can change to make? The devices I am polling have upwards of 1000 interfaces. Gregory Peterson NEW email gpeterson(a)nescmn.net IT Operations Supervisor Northeast Service Cooperative 5525 Emerald Ave, Mt. Iron, 55768 218.741.0750 Office 218.748.7608 Direct www.nesc.k12.mn.us

4 7

Printing / saving Observium pages?
by Adam Thompson 01 Aug '19

01 Aug '19

In talking to my external partners, I often need to document the current state of a port. Observium’s Ports screen is perfect for the task… except that there’s no way to save it, print it, turn it into a PDF, etc. I don’t want to grant the receiving person the ability to log into my Observium instance, I just want to send them the data neatly arrayed. Does anyone have a way to accomplish this with Observium? Right now I’m taking screenshots, cropping them, pasting them together, etc. which is a PITA. Advice appreciated, -Adam Adam Thompson Consultant, Infrastructure Services [[MERLIN LOGO]]<https://www.merlin.mb.ca/> 100 - 135 Innovation Drive Winnipeg, MB, R3T 6A8 (204) 977-6824 or 1-800-430-6404 (MB only) athompson(a)merlin.mb.ca<mailto:athompson@merlin.mb.ca> www.merlin.mb.ca<http://www.merlin.mb.ca/>

4 4

The down host does not show up on the map
by Jacek.Dabrowski＠selgros.pl 01 Aug '19

01 Aug '19

Hi all, I have 3 cases of down state hosts that do not show up on the map, Obs ver 19.3.9774 (14th March 2019) [cid:image001.jpg@01D54853.9857BD30] [cid:image007.jpg@01D54853.9857BD30] Pozdrawiam Jacek Dąbrowski Koordynator Administratorów IT [cid:image008.png@01D54853.9857BD30]<http://transgourmet.pl/> Transgourmet Polska Sp. z o.o. Zamenhofa 133, 61-131, Poznań, Polska tel.: +48 61 874 20 17 kom.: +48 604 069 933 E-mail: Jacek.Dabrowski(a)selgros.pl www.selgros.pl<http://selgros.pl> www.selgros24.pl<http://selgros24.pl> www.transgourmet.pl<http://transgourmet.pl> Transgourmet Polska Sp. z o.o. jest zarejestrowana w Sądzie Rejonowym Poznań-Nowe Miasto i Wilda w Poznaniu, Wydział VIII Gospodarczy Krajowego Rejestru Sądowego pod nr KRS: 0000045597. NIP: PL 781-10-11-998, REGON 630375413. Wysokość kapitału zakładowego: 310.000.000,00 złotych. Zapraszamy do korzystania z aplikacji HELPDESK<http://helpdesk-it>

1 0

Brocade/Extreme NOS MIBs missing
by Kaiser, Erich 01 Aug '19

01 Aug '19

Please add them in, we are unable to get uwatt readings from our switch optics. nos6.0.2a_all_mibs.tar should have all needed to load in. Erich Kaiser The Fusion Network erich(a)gotfusion.net Office: 815-570-3101

3 10

Actual DB scheme
by Vladimir R 31 Jul '19

31 Jul '19

Hello. Where can I get the current database schema? My current version of observium is 19.7.9981. -- The best regards! Vladimir R.

4 5

Question about health graphs on IOS-XR
by Edvinas Kairys 29 Jul '19

29 Jul '19

Hello, Is there any reason why Observium doesnt show SFP db levels graphs on IOS-XR devices ? Thank you

4 15

Disable logging on filesystem (/opt/observium/logs/observium.log)
by Klimek, Denis 24 Jul '19

24 Jul '19

Hey folks, does anyone know if it's possible to disable the logging which is defined in "includes/defaults.inc.php:#$config['log_file'] = $config['install_dir'] . "/observium.log"? Mit freundlichem Gruß Stadtwerke Norderstedt Denis Klimek Professional Network Engineer IP-Systemtechnik Tel: 040 / 521 04 - 1049 Mobil: 0151 / 652 219 06 dklimek(a)stadtwerke-norderstedt.de<mailto:dklimek@stadtwerke-norderstedt.de> www.stadtwerke-norderstedt.de<http://www.stadtwerke-norderstedt.de/>

2 3

Cisco ASA IPSEC tunnel graphs
by Andre Geißler 23 Jul '19

23 Jul '19

Hi all All graphs be it Bits or Packets for Cisco ASA IPSec are faulty. No problems with other graphs. Is this just my or a more general issue? Cheers, Andre

5 5

HouseKeeping erase Users/Ports Relationship ??
by Andres Pugawko 17 Jul '19

17 Jul '19

Hi All, I'm having a issue after migrate Observium other server, from Ubuntu 16.04 to Ubuntu 18. After create an User and made a relationship with a port/device , it'll desappear a few hours later. I commented the line of housekeeping script in linux CRON and the problem seem be resolved. Any idea / Suggestion, about it? [image: image.png] [image: image.png]

2 2

Device support
by Derek Sedik 17 Jul '19

17 Jul '19

Hello, We have (3) devices which are not being discovered properly. Is it possible to get support added for these? Edgecore AS5812-54X running SnapRoute CN-NOS WTI VMR-8HD20-2 Geist Watchdog 15-P Thanks, Derek

2 1

An issue with zooming the front page map
by Richard Kuhns 16 Jul '19

16 Jul '19

Hello, We're currently running Observium v19.6.9959. Lately (I'm afraid I'm not sure when this started), when we double-click to zoom in on an area it only stays zoomed in for at most 10 to 15 seconds. It then bounces back out to its default. We're using Refresh time 5 minutes, Wikimedia map tiles, map height 500 pixels, Google API with our API key all set via the web interface. Is anyone else seeing this? Have I missed a config option somewhere? Thanks for any pointers. Richard J. Kuhns, Systems Administrator Wintek Corporation p: 765-742-8428 a: 427 North 6th Street | Lafayette, IN 47901 w: www.wintek.com<http://www.wintek.com> e: rjk(a)wintek.com<mailto:rjk@wintek.com>

5 5

Lost all graphs after server shut down
by Shekhar Basnet 16 Jul '19

16 Jul '19

Hi, So what happened was the power to the Ob server failed in weekend and was stuck in bios prompt when I got to work. I brought it up. Later I noticed that all the graphs were empty. I checked and saw that the date/time was set to Feb 2019 not sure why. I then synced the time. The old graphs are gone. The new usage are being populated. How would I start fixing this? My server spec is as below:- Version Information *Observium CE* 18.9.9420 (5th September 2018) *OS* Linux 3.10.0-862.11.6.el7.x86_64 [amd64] (CentOS 7) *Apache* 2.4.6 (CentOS) OpenSSL/1.0.2k-fips mod_fcgid/2.3.9 PHP/5.6.40 mod_perl/2.0.10 Perl/v5.16.3 *PHP* 5.6.40 (OPcache: ENABLED) *Python* 2.7.5 *MySQL* 5.5.60-MariaDB (extension: mysqli 5.5.60-MariaDB) *SNMP* NET-SNMP 5.7.2 *RRDtool* 1.4.8 *Fping* 3.10 (IPv4 only) Thank you, Shekhar -- DISCLAIMER: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized use or disclosure is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message. IRS CIRCULAR 230 DISCLOSURE: Any U.S. tax advice contained in this communication (including any attachments) is not intended or written to be used, and cannot be used, for the purpose of (i) avoiding penalties under the Internal Revenue Code or (ii) promoting, marketing or recommending to another party any transaction or matter addressed herein.(FR08-i203d)

3 3

FS.com Switches (Fiberstore)
by Serghei Golipad 15 Jul '19

15 Jul '19

Hi Team, Do you plan to add support for these? I know ****NMS has correct way of discovering them and adding logo, would be nice if Observium did so too :) Cheers PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

2 7

Display poe power
by Simon Mousey Smith 12 Jul '19

12 Jul '19

Hi All We use a few Netgear GS110TP switches with POE for WiFi points and VOIP Phones Is it possible to have observium display the outputs of the power being provided to each port? I have found the MIBs for this switch - http://www.downloads.netgear.com/files/GDC/GS110TP/GS108Tv2_GS110TP%20MIB_V… <http://www.downloads.netgear.com/files/GDC/GS110TP/GS108Tv2_GS110TP%20MIB_V…> A sample output shows in the web panel as the following g2 Enable 16.2 Low 802.3af 4point Only 4 None 46 65 3.0 Class 15400 Delivering Power Im also happy to help with any SNMP outputs from the switch needed :) Regards Simon

4 8

Serial Number searches not working properly
by Andrew Lemin 10 Jul '19

10 Jul '19

Hi list, Hope everyone is well 😊 We have been using the serial number search feature a lot recently as part of an audit / support contract renewals. And we have found that when a stack of switches exists, only the first serial number for the first stack member is searchable! When going to the device and selecting the ‘Inventory’ tab, we can see the serial numbers for all stack members. But the search query is not finding these ☹ After discovering this exclusion, we have tested some more and found that the issue also exists for line cards. I.e. only the chassis serial number is searchable, the line card serial numbers in the chassis are not returning the node. Again, the serial numbers for the line cards are being correctly displayed in the Inventory. So at a guess, it seems like the SQL query needs enhancing to include the referential child rows or tables for devices internal components (guessing stack slave members are treated like line cards). Thanks for your thoughts, Cheers Andy.

3 4

Hardware inventory missing
by Tomasz Karczewski 09 Jul '19

09 Jul '19

Hi, I have Alcatel-Lucent 7750 Routers and i noticed that i have hardware inventory missing. I had that but now i don’t have. Tomasz Karczewski Administrator Sieci <mailto:tkarczewski@man.olsztyn.pl> tkarczewski(a)man.olsztyn.pl <http://www.man.olsztyn.pl> http://www.man.olsztyn.pl <http://www.uwm.edu.pl> http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie

1 0

traffic alert to a tunnel interface?
by Laszlo Nemeth 08 Jul '19

08 Jul '19

Hello I have some GRE tunnels without physical interface speed and theye are always in UP state. So in this case i am not able to set an alert to notify me when "ifInOctets perc le 1" or if the interface status is down. Is there any options to set up a byte/sec alert ex: i would like to get an alert if the average traffic is lower than 100 byte/sec in the last 5 mins ? Thanks Laszlo

2 2

How to exclude "virtual Memory" from an alert checker (but keep all other memory metrics)?
by Thomas Stather 04 Jul '19

04 Jul '19

Hi We are using Observium Professional: 19.6.9946 (rolling) I have set up an alert check to check our servers for fully occupied memory ("mempool_perc greater 80"). I want to include the metrics "Memory buffers", "Physical Memory", "Swap space" but i want to exclude "Virtual memory". Is there a way of doing so and if so, how? Best, Thomas -- Thomas Stather IT Services VCP4, VCP6-DCV, VCP6.5-DCV Tel: +49 6221 486 628 Fax: +49 6221 486 561

2 1

One more question, this time about GeoCoding
by Richard Kuhns 04 Jul '19

04 Jul '19

Hello, We're running v19.6.9959. How do I tell Observium to look up the SNMP Location again for all devices? We've recently purchased an API key for google geocoding, which I've installed via the GUI. However, when I look at a specfic device --> Properties --> Geolocation, the Last updated field looks ok (2019-07-03 07:26:42) which is a few minutes after I logged into the device. Last update status, though, says: Geocoding ENABLED, try detect device coordinates: by PARSING sysLocation (API: YAHOO) - NOT REQUESTED GEO API REQUEST: QUERY DATE: Wed, 19 Jun 2019 12:16:42 -0400 It *does* work on a few devices, however, showing that it's using the Google API. Where would be a good place to start debugging this (as in, see exactly what observium is sending along with the response)? Thanks Richard J. Kuhns, Systems Administrator Wintek Corporation p: 765-742-8428 a: 427 North 6th Street | Lafayette, IN 47901 w: www.wintek.com<http://www.wintek.com> e: rjk(a)wintek.com<mailto:rjk@wintek.com>

2 1

RHEL and Observium enterprise license
by DeBoer, Alan 02 Jul '19

02 Jul '19

Hi All, Just wondering if there is any support roadblocks if we use RHEL for our Observium installs with an enterprise license? I'm talking about scaling, feature requests, dev support...ect. We recently purchased an enterprise license and our environment is currently Debian, but we possibly need to move to RHEL. I understand Observium was developed under Debian, but I'm not finding anything in the FAQ besides some font issues that can be fixed. Thanks, Alan DeBoer

4 4

ONU associations (Huawei SmartAX EA5800 GPON)
by Rodrigo Simões 27 Jun '19

27 Jun '19

Hi, Observium is capable of showing specific informations about GPON? I.e: Number of connected ONUs on a specific GPON port. Tks, Rodrigo

1 0

Suddenly won't update RRDs anymore
by Luca Sasdelli 27 Jun '19

27 Jun '19

Hi, version 19.6.9959: all RRDs last update one week ago. Neither system log nor observium logs show any issue. /rrd folder permissions are as before. What should I check? Thanks Luca

2 1

Sensor limits creating false alerts
by Richard Savage 25 Jun '19

25 Jun '19

Hi All > > I have found a bit of a potential bug with the sensor data output > which doesnt seem to be related to any particular version of Observium > or device being polled (useful I know!) > > However it looks like some sensors limits are being updated to NULL > regularly, which is throwing alerts and scaring staff ;-) > Noticed on both 19.3.9774 and 19.4.9840. > > e.g from a device event log: > > 2019-05-10 12:36:07 Ethernet1/49 Lane 2 Transceiver Temperature > <https://stats.goodwood.com/device/device=170/tab=health/metric=temperature/…> > Sensor updated (limits): limit_high -> "0", limit_high_warn -> > "NULL", limit_low -> "0", limit_low_warn -> "NULL" > > > 2019-05-10 13:08:08 Ethernet1/49 Lane 2 Transceiver Transmit Power > <https://stats.goodwood.com/device/device=170/tab=health/metric=dbm/id=55096/> > Dbm Ethernet1/49 Lane 2 Transceiver Transmit Power above threshold: > 0.03 dBm (> 0 dBm) > > > > > A re-discovery of the affected device will fix the issue, until the next time it happens. Happy to provide any further debug required. Thanks Richard

3 21

Observium Sensors
by Serghei Golipad 24 Jun '19

24 Jun '19

Guys, Is there any way of just polling PSU Status/Voltage and ignore port sensors? Cheers PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

3 5

Reports
by Christian Eriksson 24 Jun '19

24 Jun '19

Hi, Since there is no reporting in Observium, how do you get a list of devices and the metric "availability"? That value is not stored in the DB (I think), the only way is to retrieve it from the RRD files, correct? Regards Christian

2 1

Cisco ASA in Azure?
by Storer, Darren 24 Jun '19

24 Jun '19

Hi, Has anyone else noticed that the soft version of Cisco ASA, hosted in Azure, just reports back as a generic device, without any of the lovely ASA specific features that Observium normally displays? 'Cisco Firepower Threat Defense, Version 6.2.3.13 (Build 53), ASA Version 9.9(2)51' Regards Darren

3 3

Eltek Compact Shelf Discovery
by Jay Hanke 21 Jun '19

21 Jun '19

I've got a number of Eltek compact shelves (-48 VDC) power systems that are failing to discover. I get a bunch of these in the discovery debug. STDERR[ Error in packet Reason: (noSuchName) There is no such variable name in this MIB. Failed object: NSCRTV-ROOT::commonDeviceVendorInfo.1 ] It's able to pull the Sys Description and uptime. Am I missing a MIB? Thanks Jay

2 1

Confusing Poe+ Sensor alerts/warnings
by James Tandy 21 Jun '19

21 Jun '19

Hi, Hardware: HPE J9780A Switch 2530-8-PoEP Did some digging, thanks to the very helpful new? tool https://mibs.observium.org/mib/HP-ICF-POE-MIB/#hpicfPoePethPsePortPower It appears the PoE Power warning is based on being over poe (not poe+) limits, not sure how it determines what the maximum allowed should be. For PoE+ Switches it is 30W The seemingly undocumented OID .1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.16 gives the following output: .1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.16.1.1 = 1 .1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.16.1.2 = 1 .1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.16.1.3 = 2 .1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.16.1.4 = 1 .1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.16.1.5 = -1 .1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.16.1.6 = 2 .1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.16.1.7 = 1 .1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.16.1.8 = -1 Ports 1,2,4 and 7 have PoE devices attached. Ports 3 and 6 have PoE+ devices and ports 4 and 8 are disconnected. This table matches the 'PLC Type' column in the switch GUI. Hopefully this could be useful in making more meaningful PoE Power status warnings/alerts. Also not sure why Current causes an alert.. We have 3 of these switches, some of which show 0.22A as ok, while other ports alert as low as 94mA -- Regards, James Tandy TandyUK Servers Limited Tel: 01903 247 011 Www: http://www.tandyukservers.co.uk Email: support(a)tandyukservers.co.uk TandyUK Servers Limited Registered in England and Wales, Company number 8314911 VAT Registered in the UK, number 182 0661 19 Registered Office: Amelia House, Crescent Road, Worthing, BN11 1QR

3 2

IP SLA Monitoring
by Serghei Golipad 20 Jun '19

20 Jun '19

Hi Team, Do you have similar functionality (Cisco IP SLA) for H3C/HPE (h3c-nqa-mib)? Cheers PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

2 3

how to skip SNMP check and only evaluate ICMP for some devices (HPE)?
by Thomas Stather 19 Jun '19

19 Jun '19

Hi Observium version: r9964 (rolling) OS: Ubuntu 16.04 LTS Is there a way to only evaluate the ICMP answers for certain devices (and skip SNMP)? I know that it can be done the other way round (there is a switch in the device props). We run a bunch of H3C/HP/HPE switches and there are no SNMP answers sometimes which lead to false-positives (i know about this issue already). During the next polling run, the alert is then cleared and this is annoying. Best, Thomas -- Thomas Stather IT Services VCP4, VCP6-DCV, VCP6.5-DCV Tel: +49 6221 486 628 Fax: +49 6221 486 561

2 1

UPS load
by Simon Mousey Smith 19 Jun '19

19 Jun '19

Hi All How simple is it to graph a UPS load in observium? We have bought a new UPS, and observium found all sorts from it straight away However it doesn’t appear to show a LOAD capacity? Its a MegaTec network card and Power Inspired UPS The snmp exists in min already - upsSmartOutputLoad and it only shows a percentage Maybe I can add a graph under the Capacity ? Regards Simon

2 1

Session Timeout
by Peter Derissen 18 Jun '19

18 Jun '19

Hi All, Is there any way to disable the session time-out? We are displaying Observium on several screens in our NMC and it keeps timing out....... Kind Regards, Met vriendelijke groet, Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [EF-logo_rood_RGB -handtekening]<http://www.eurofiber.nl/> Volg ons op Twitter<https://twitter.com/Eurofiber> | Linkedin<https://www.linkedin.com/company/eurofiber> | Youtube<https://www.youtube.com/user/Eurofibergroup> ******** IMPORTANT NOTICE ******** This e-mail (including any attachments) may contain information that is confidential or otherwise protected from disclosure and it is intended only for the addressees. If you are not the intended recipient, please note that any copying, distribution or other use of information contained in this e-mail (and its attachments) is not allowed. If you have received this e-mail in error, kindly notify us immediately by telephone or e-mail and delete the message (including any attachments) from your system. Please note that e-mail messages may contain computer viruses or other defects, may not be accurately replicated on other systems, or may be subject of unauthorized interception or other interference without the knowledge of sender or recipient. Eurofiber only sends and receives e-mails on the basis that Eurofiber is not responsible for any such computer viruses, corruption or other interference or any consequences thereof. Eurofiber Nederland B.V. is registered in the Chamber of Commerce of Amsterdam with number 34134377, VAT number NL 8088.51.524 B01. Eurofiber N.V. has its registered office at Belgicastraat 5 bus 7, 1930 Zaventem and is registered under national number 0435.204.851.

5 9

power sensor with 0W -> alert
by Wiethoff, Helge 18 Jun '19

18 Jun '19

Hi, since some weeks POE Groups (or other power supply unity) are marked as alarm if no output power is specified: observium-alert-zero-power.png. In this case this is not a problem, it just means that no POE-device is connected to the switch. How can I remove the alarms here? Cheers Helge

2 4

Status Alarms
by Johnathon Voegeli 14 Jun '19

14 Jun '19

Hey guys, Is there a “quick” way to add all status alarms for a device to alert on abnormal values? I assume I’m missing it somewhere, but could not find it in the documentation. Thanks in Advance for my ignorance. ~JV

2 1

Didactum-MIB does not run
by Christian Moh 14 Jun '19

14 Jun '19

Hello, the Didactum-MIBs does not run at the moment. Added support in r9932 (trunk). But i do not found them in the List! Can please look everyone about this? Signatur C.Moh Mit freundlichen Grüßen Christian Moh ______________________________________________________ _*Christian Moh*_ */IT-Services/* /*Max-Planck-Institut für medizinische Forschung* Jahnstraße 29 69120 Heidelberg Telefon: +49 6221 486-640 E-Mail:/ Christian.Moh(a)mpimf-heidelberg.mpg.de

2 1

Distro script error with openvz
by Simon Mousey Smith 14 Jun '19

14 Jun '19

Hi All Is anybody else having an issue with the distro script? It keeps generating an error with openvz containers for myself anyways root@observium:~# distro /usr/local/bin/distro: 359: [: Illegal number: 048522eb-610e-411a-aa48-714ba20a475c Linux|4.15.0|amd64|Ubuntu|18.04||openvz root@observium:~# Regards Simon - Hestor Ltd

3 5

CheckPoint Firewall Sessions
by Joelly, Alexander 12 Jun '19

12 Jun '19

Good Morning, Running Enterprise version 19.5.9872 and also CE 18.9.9420 which was upgraded from the previous one a couple month ago. I could swear the previous CE version had a graph for the firewall sessions of CheckPoint firewall's - but unable to find them now in the Enterprise and CE version... Thanks, Alex

2 1

Localhost memory showing as MINUS or NAN
by Simon Mousey Smith 12 Jun '19

12 Jun '19

Hi All Ive only just noticed, but since I did a fresh install of observium on a new server and then migrated old data over, the memory for ‘localhost’ is showing as MINUS or NAN%? Anybody have an ideas? I don’t have anything special in the snmpd.conf as it shows below root@observium:~# cat /etc/snmp/snmpd.conf # Listen for connections on all interfaces (both IPv4 *and* IPv6) agentAddress udp:161,udp6:[::1]:161 # Full view access view all included .1 # system + hrSystem groups only view systemonly included .1.3.6.1.2.1.1 view systemonly included .1.3.6.1.2.1.25.1 # Default access to full view rocommunity public 127.0.0.1 -V all # Default access to basic system info #rocommunity public default -V systemonly # System contact and location syslocation L24 XXX syscontact Simon Smith # Disk Monitoring disk / 10000 disk /var 5% includeAllDisks 10% # Unacceptable 1-, 5-, and 15-minute load averages load 12 10 5 # This line allows Observium to detect the host OS if the distro script is installed extend .1.3.6.1.4.1.2021.7890.1 distro /usr/local/bin/distro # This lines allows Observium to detect hardware, vendor and serial #extend .1.3.6.1.4.1.2021.7890.2 hardware /bin/cat /sys/devices/virtual/dmi/id/product_name #extend .1.3.6.1.4.1.2021.7890.3 vendor /bin/cat /sys/devices/virtual/dmi/id/sys_vendor #extend .1.3.6.1.4.1.2021.7890.4 serial /bin/cat /sys/devices/virtual/dmi/id/product_serial # This line allows Observium to collect an accurate uptime extend uptime /bin/cat /proc/uptime # This line enables Observium's ifAlias description injection pass_persist .1.3.6.1.2.1.31.1.1.1.18 /usr/local/bin/ifAlias_persist root@observium:~# The code was copied over from the observium docs - https://docs.observium.org/device_linux/ <https://docs.observium.org/device_linux/> Regards Simon

2 4

API question
by Serghei Golipad 12 Jun '19

12 Jun '19

Hi All, I have enabled API access however when I comes to running a query, the response I get is it's "disabled". Any ideas? root@uk3soc-observium01:/opt/observium# cat config.php | grep api $config['api']['enabled'] = 1; uk1soc-hopoff01:~$ curl -u username:password http://10.200.252.10/api/v0/devices The API is disabled uk1soc-hopoff01:~$ Thank you. PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. CDW Limited is a Company registered in England and Wales. This email is sent for and on behalf of CDW Finance Holdings Limited. CDW Finance Holdings Limited is the UK holding company for CDW Limited trading as CDW. The registered office for CDW Finance Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than CDW or the sender of its existence. For more information about CDW please visit www.uk.cdw.com

2 3

Monitor HDD Temps
by Jens Görke 12 Jun '19

12 Jun '19

Hello, I would like to monitor the HDD temps of my servers (localhost and remote). How can I do that in Observium? Didn‘t find a solution so far. Thanks for helping. Best regards Jens Von meinem iPhone gesendet

4 7

Ubiquiti EdgeOS - Port Descriptors
by mal＠platinumnetworks.com.au 11 Jun '19

11 Jun '19

Hi all - I have a number of EdgeOS devices in the field that I would like to add in to Observium but I am having an issue with the port descriptors as follows: I have set the interface description as follows - "description CUST:JOHNSONS(AAPT_NWBL2)[50M]{1736079}" using the CUST: and various brackets as outlined in the documentation. The OS does not like spaces in the description field so I was forced to remove them to get the config to stick. Problem is that when the interface is parsed the description comes up as just description CUSTJOHNSONSAAPT_NWBL250M1736079 which clearly is not going to be parsed correctly by Observium. Wondering if anyone has come across this previously and can pint me in the direction of a solution/workaround. Cheers Mal

2 1

frontpage
by Arnoldo Vidal Bravo 05 Jun '19

05 Jun '19

Hi, in the webpage (19.5.9872) how we can do to show only devices down?, actually we can see devices down, port errors, port down. -- Saluda cordialmente

1 0

alert checker loop
by Jacek.Dabrowski＠selgros.pl 03 Jun '19

03 Jun '19

Hello, I made an error in the alert checker, the result of which I can not get to the Observium via HTTP , how to edit the alert checker by the CLI ??? Regards Jacek Dąbrowski

2 1

Alert for description port
by VIP TELECOM - Rafael 31 May '19

31 May '19

Hello, I need a help with alerts: I have mikrotik, extreme, datacom, huawei, cisco ..., all registered by ip in observium and with their doors properly described in the equipment. The port down, device down, displays the ip of the device and the number of the port, in the cases of mikrotik it presents the description of the port, but in other cases it only displays the port number. When we receive an alert on the telegram for example, or even on the dashboard, we can not know what that port is until it clicks on it, could it send the description along with the alert in a way that works for all manufacturers? In mikrotik the association that I make is: port.ifAlias in others the association is: port.ifDescr One more question would be: In addition to sending the ip of the device, it would have to send the hostname of the device, this would be very useful also in the dashboard --

1 0

sending sms directly from observium
by Arnoldo Vidal Bravo 31 May '19

31 May '19

Hi, All methods to send notification by SMS needs internet. But if link to internet is down the messages never arrives on time. i was working on a solution "homemade", this implement a Arduino as web server and Gsm shield. Now observium can send SMS without externals. I have selected webhook as method but always it showme in debug Notifying [webhook] arduino: {"url":"http:\/\/A.B.C.D"} [FALSE] Arduino must send a response but i dont know what field send ... status, code ...? somebody have this data? -- Saluda cordialmente

2 1

notifications
by Arnoldo Vidal Bravo 30 May '19

30 May '19

hi, How can I define different notification formats, email html or webhook? email_html.tpl, webhook.tpl ?? -- Saluda cordialmente

1 0