- observium - lists.observium.org

broke smokeping graphs/type=smokeping_in
by Ivo van Tulden 30 Mar '26

30 Mar '26

Dear, Can you assist me with a problem, I have broken myself? If have smokeping running and wanted to change the name 'localhost' to my machine name within the ping graphs. No the third graph is broken. Seems normal to change it back, but don't know anymore where to look. It is a Ubuntu 24.04 install. Can anyone give me a couple of hints? Linkpart: "graphs/type=smokeping_in" [cid:c6bf3e26-eb57-4f7f-9a01-634c842e7f0d] Met vriendelijke groet, Ivo van Tulden Industrial Automation [cid:dd24edd0-4f72-42e5-baac-bf57868b8ce8] **** DISCLAIMER: The information sent in or attached to this e-mail is for the addressee only. If this e-mail message is unclear please contact VLISCO by e-mail or telephone. Disclosure or reproduction of this information to a third party without prior agreement of VLISCO is not allowed. VLISCO does not accept any responsibility for the correct and complete interpretation of this e-mail nor for the time of its arrival. VLISCO cannot be held responsible for any claim resulting from negotiations and/or decisions made directly or indirectly based on information contained in this e-mail message. Vlisco Netherlands B.V. Binnen Parallelweg 27, 5701 PH, Helmond, The Netherlands. Chamber of commerce Eindhoven 50751492. Tel.: +31 (0)492 570922 Fax: +31 (0)492 570230 Visit our website: www.vlisco.com ****

1 0

Add DATAKOM D500 to observium!
by daniel＠nav.ro 30 Mar '26

30 Mar '26

Hello, Datakom provides multiple power generator central units and we currently have DATAKOM D500 model. They have provided us with the .mib file for snmp implementation. Can you help us add it to observium? I can provide the mib file. Thank you.

2 1

how can i alert when link is up but eigrp peer (next hop) is down
by Tony Guadagno 27 Mar '26

27 Mar '26

hi, I am hoping someone can give me some suggestions on how to alert when my Cisco router's interface is up/up but the other side is not responding. I just discovered that I have been running on a backup line for a while at one site and did not know it because the primary link did not go "down" is there anything I can do with monitoring eigrp peers etc. It did occur to me that if I set up an sla on the router, I might be able to leverage that, but I would like a solution that did not involve more config on the router. thanks in advance

2 6

Webhook alerts and access to alert graph
by Marian Rychtecky 16 Mar '26

16 Mar '26

Hello all, I am integrating Observium alerts with a Matrix notification service and would like the Matrix message to include the alert graph, similar to the standard email alert. While looking at the email transport code, I noticed that it already receives a prepared $context['graphs'] structure. Each graph contains fields such as type, url, and data, and the email transport simply embeds the rendered graph image from that data. With webhook alerts, however, the JSON payload does not appear to include this graph information. Reconstructing the correct graph from the available webhook fields is difficult because the graph type and parameters are not always obvious. Would it be possible for webhook transports to expose the same graph context that is already available to the email transport (for example, the graphs[] array or at least the graph URL? That would make it much easier to integrate Observium alerts with systems such as Matrix or Slack while preserving the graph context included in email alerts. Thanks a lot, Marian -- Marian Rychtecký NIX.CZ, z.s.p.o.

1 0

casa 100G "logical-channel 0 description"
by Sébastien Gay 09 Mar '26

09 Mar '26

Hello, Can you add the interface description? « interface upstream 13/14.2 description "Fy-15 Petit-Pont 3 45" frequency 45000000 channel-width 6400000 power-level 6 ingress-cancellation logical-channel 0 description "Fy-15 Petit-Pont 3 45" « ALERT Modify <https://observiumm.sinergy.ch:8078/device/device=200/tab=alert/alert_entry= 56152/> Alert Alarme SNR Alert Entity Logical Upstream Channel 13/14.2/0 DS SNR <https://observiumm.sinergy.ch:8078/device/device=200/tab=health/metric=snr/ id=3949/> Conditions sensor_value less 25 (20.2) Metrics sensor_value = 20.2 Duration 7m 2s (09-03-2026 17:10:07) Device Device 1.1.1.1 (Casa 02 Village Externe) Hardware Operating System CASA DCTS Thanks in advance, Adam Sébastien

1 0

Inquiry regarding HA deployment with 2 Observium server
by Ashraf Alkheroo 03 Mar '26

03 Mar '26

We are currently planning a deployment involving two Observium servers and would appreciate clarification regarding the appropriate edition and recommended architecture. Our objective is to implement a high-availability (HA) setup with the following requirements: * Two Observium servers operating together. * If a device is added for monitoring on one server, it should automatically appear on the other server. * The database should be synchronized between the two servers. * The overall solution should provide redundancy and ensure service continuity if one server fails. Could you please confirm: * Which Observium edition supports this type of multi-server / HA deployment? * Whether native database synchronization between two servers is supported. * Any recommended architecture or best practices for achieving full HA with shared data consistency. We would appreciate your guidance in selecting the correct version and architecture for our needs. Kind regards, Ashraf ALkheroo Network and System administrator [cid:image001.png@01DCAA45.A0FD6A60] Support : +41 (0)21 544 29 29 Internet * VoIP * Network * Hosting Consulting * IT Management

2 1

device showing connection to switch
by Ivo van Tulden 02 Mar '26

02 Mar '26

Dear sir/mem, Within Observium there is a nice 'network map' view which shows al the network devices. Is there a view to show the connection from a device in this netwerk map view? A view that shows the connections to the network-switch it is connected? Met vriendelijke groet, Ivo van Tulden Industrial Automation [cid:47aed2b0-0052-4ebb-9aba-849cae761954] **** DISCLAIMER: The information sent in or attached to this e-mail is for the addressee only. If this e-mail message is unclear please contact VLISCO by e-mail or telephone. Disclosure or reproduction of this information to a third party without prior agreement of VLISCO is not allowed. VLISCO does not accept any responsibility for the correct and complete interpretation of this e-mail nor for the time of its arrival. VLISCO cannot be held responsible for any claim resulting from negotiations and/or decisions made directly or indirectly based on information contained in this e-mail message. Vlisco Netherlands B.V. Binnen Parallelweg 27, 5701 PH, Helmond, The Netherlands. Chamber of commerce Eindhoven 50751492. Tel.: +31 (0)492 570922 Fax: +31 (0)492 570230 Visit our website: www.vlisco.com ****

3 4

Inquiry regarding HA deployment with 2 Observium servers
by Ashraf Alkheroo 02 Mar '26

02 Mar '26

Dear Observium Support Team, We are currently planning a deployment involving two Observium servers and would appreciate clarification regarding the appropriate edition and recommended architecture. Our objective is to implement a high-availability (HA) setup with the following requirements: * Two Observium servers operating together. * If a device is added for monitoring on one server, it should automatically appear on the other server. * The database should be synchronized between the two servers. * The overall solution should provide redundancy and ensure service continuity if one server fails. Could you please confirm: * Which Observium edition supports this type of multi-server / HA deployment? * Whether native database synchronization between two servers is supported. * Any recommended architecture or best practices for achieving full HA with shared data consistency. We would appreciate your guidance in selecting the correct version and architecture for our needs. Kind regards, Ashraf ALkheroo Network and System administrator [cid:image001.png@01DCAA36.32443900] Support : +41 (0)21 544 29 29 Internet * VoIP * Network * Hosting Consulting * IT Management

1 0

Script environment variable OBSERVIUM_DURATION always 0s
by Tony Guadagno 26 Feb '26

26 Feb '26

hi, another issue i am finding with script variables is OBSERVIUM_DURATION. i am including in script notifications but it always reports as 0s (current date). so in other words, the duration of the alert is always reported to be 0s. this seems like a bug as well?? should i put in a ticket for this also? thanks again for all your help!

2 6

PharmaBridge International for Top ED Products
by cedos94738＠ostahie.com 26 Feb '26

26 Feb '26

PharmaBridge International is a globally licensed pharmaceutical provider specializing in high-quality erectile dysfunction (ED) treatments sourced from reputable manufacturers. With a strong commitment to regulatory compliance and patient safety, the company offers a range of trusted ED products designed to support men’s sexual health and performance. Each medication undergoes strict quality assurance checks to ensure authenticity, potency, and efficacy, meeting international pharmaceutical standards. PharmaBridge International emphasizes secure online ordering, discreet packaging, and reliable worldwide delivery, making it convenient for customers seeking effective ED solutions. The platform provides transparent product information and responsive customer support to help individuals make informed choices. With a focus on integrity, accessibility, and quality, PharmaBridge International remains a dependable destination for those looking to manage erectile dysfunction confidently and safely. Whether choosing standard formulations or higher-strength options, the company ensures that each product aligns with clinical expectations and consumer needs. Website- https://pharmabridgeinternational.com/

1 0