- observium - lists.observium.org

alert box
by Arnoldo Vidal Bravo 05 Nov '24

05 Nov '24

Hi A few days ago we updated observium (from 23.2.12520 to 24.8.13606) and now we don't see the alerts for monitored ports. Before we saw yellow boxes (warnings), now they don't appear. Does it no longer show that information? port down we must add something in the config file? -- Saluda cordialmente

1 1

Air gapped device - status and monitoring
by Ivo van Tulden 28 Oct '24

28 Oct '24

Hello We have an air gapped device for back-up. This devices is active once a week for a couple of hours to get the latest back-up and then the device goes offline. The default behaviour is that the device is down and gives a 'error' for the rest of the week because it can't be reached. Is their a way to: * For a working window of the device? Meaning that outside the specified couple of hours the device will not show down/error? * Flip the device status when not in the working window? Meaning if the device goes online on a different time there is an alert? Met vriendelijke groet, Ivo van Tulden Industrial Automation [cid:image001.png@01DB2954.D83E8810] **** DISCLAIMER: The information sent in or attached to this e-mail is for the addressee only. If this e-mail message is unclear please contact VLISCO by e-mail or telephone. Disclosure or reproduction of this information to a third party without prior agreement of VLISCO is not allowed. VLISCO does not accept any responsibility for the correct and complete interpretation of this e-mail nor for the time of its arrival. VLISCO cannot be held responsible for any claim resulting from negotiations and/or decisions made directly or indirectly based on information contained in this e-mail message. Vlisco Netherlands B.V. Binnen Parallelweg 27, 5701 PH, Helmond, The Netherlands. Chamber of commerce Eindhoven 50751492. Tel.: +31 (0)492 570922 Fax: +31 (0)492 570230 Visit our website: www.vlisco.com ****

2 1

Observium - Halkbank Enterprise Plan Purchasing
by Recep Oguz AKKUS 25 Oct '24

25 Oct '24

Hello Dear Sir/Madam, We are one of the largest banks in Türkiye. With Observium, we want to monitor more than 4000 UPS and Printers in our branches. We are interested in purchasing a Enterprise plan. In accordance with the institution's procedures, we need to sign a contract for the purchase. We also request technical support for installation. Can we organise a meeting to get acquainted? Do you have a business partner in Turkey? Thanks in advance. Best Regards. [https://beraber.halkbank.com.tr/hbcdn/assets/image/mail/images/imza/logo.png]<https://www.halkbank.com.tr/> Information Technologies Operation Department [https://beraber.halkbank.com.tr/hbcdn/assets/image/mail/images/imza/konum.p…]<https://www.halkbank.com.tr/tr/iletisim.html> [https://beraber.halkbank.com.tr/hbcdn/assets/image/mail/images/imza/web.png] <https://www.halkbank.com.tr/> [https://beraber.halkbank.com.tr/hbcdn/assets/image/mail/images/imza/twitter…] <https://twitter.com/halkbank> [https://beraber.halkbank.com.tr/hbcdn/assets/image/mail/images/imza/faceboo…] <https://tr-tr.facebook.com/halkbank/> [https://beraber.halkbank.com.tr/hbcdn/assets/image/mail/images/imza/linkedi…] <https://www.linkedin.com/company/halkbank/> [https://beraber.halkbank.com.tr/hbcdn/assets/image/mail/images/imza/youtube…] <https://www.youtube.com/halkbank> [https://beraber.halkbank.com.tr/hbcdn/assets/image/mail/images/imza/instagr…] <https://www.instagram.com/halkbank/> Recep Oguz AKKUS / IT Technician [https://beraber.halkbank.com.tr/hbcdn/assets/image/mail/images/imza/mail.png] RecepOguz.AKKUS(a)halkbank.com.tr<mailto:RecepOguz.AKKUS@halkbank.com.tr> 📞 +90 216 503 47 62<sip:0216%20503%2047%2062> [https://beraber.halkbank.com.tr/hbcdn/assets/image/mail/images/imza/doga.png] I avoid wasting paper, I don't print unless necessary. *Bu e-posta ve ilişikteki dosyalar hukuken gizli ve kişisel veri/özel nitelikli kişisel veri içermektedir. Kişisel verilerle ilgili bilgilendirmeyi halkbank.com.tr adresinden okuyabilirsiniz. E-posta ve içeriği, sadece gönderilen gerçek veya tüzel kişinin gönderim amacıyla sınırlı kullanımı içindir. Muhatap, kendisine gönderilen bilgileri gönderim amacıyla sınırlı ve ölçülü olarak kullanacağını kabul eder. Eğer bu e-postanın muhatabı değilseniz bu e-postanın ve eklerinin kopyalarını herhangi bir şekilde kullanamaz, gönderemez, dağıtamaz ve yedekleyemezsiniz. Lütfen bu e-postayı yanlışlıkla aldıysanız, gönderene bu durumu bildiriniz ve e-posta ve ilişiğindeki belgeleri sistemden siliniz. Bu mesaj aksi sözleşme ile belirtilmedikçe herhangi bir işlem teklifi amacı taşımamaktadır. Türkiye Halk Bankası A.Ş.’nin hiçbir çalışanı veya temsilcisi, elektronik posta yolu ile Türkiye Halk Bankası A.Ş. adına bağlayıcı bir sözleşme yapmak için yetkilendirilmemiştir.* *This message contains confidential information and personal data/sensitive personal data. You can reach and read acknowledgement about data protection on halkbank.com.tr. It’s intended only limited use of the individual or legal entity to whom they are addressed only for sending purpose. Recipient acknowledges that he/she shall only use the information in accordance with its sending purpose. If you are not the named addressee, you should not use, disseminate, distribute or copy this e-mail and its attachment. Please notify the sender immediately by e-mail if you have received this email by mistake and delete this email and its attachment from your system. Unless otherwise specified by a mutual agreement, this message is not intended to be a request for a transaction. No employee or agent is authorized to conclude any binding agreement on behalf of Türkiye Halk Bankası A.Ş. with any third party by e-mail.*

1 0

VMware VMs keeps discovering more and more
by Ivo van Tulden 24 Oct '24

24 Oct '24

Dear community, This week I started with a new Observium installation, and love the product. A small problem is with my VMware 6.7 hosts (I know they are old) which keeps adding the same VM's to the list. How can I resolve this? Same VM a lot of times: [cid:image001.png@01DB1B14.94FE47F0] Met vriendelijke groet, Ivo van Tulden Industrial Automation **** DISCLAIMER: The information sent in or attached to this e-mail is for the addressee only. If this e-mail message is unclear please contact VLISCO by e-mail or telephone. Disclosure or reproduction of this information to a third party without prior agreement of VLISCO is not allowed. VLISCO does not accept any responsibility for the correct and complete interpretation of this e-mail nor for the time of its arrival. VLISCO cannot be held responsible for any claim resulting from negotiations and/or decisions made directly or indirectly based on information contained in this e-mail message. Vlisco Netherlands B.V. Binnen Parallelweg 27, 5701 PH, Helmond, The Netherlands. Chamber of commerce Eindhoven 50751492. Tel.: +31 (0)492 570922 Fax: +31 (0)492 570230 Visit our website: www.vlisco.com ****

3 5

Observium Professional Subscription
by Joseph Padueng 21 Oct '24

21 Oct '24

Hi Sir, If i want to Purchase Observium Professional Subscription, so what is the procedure? Regards, Joseph Padueng

1 0

Can't log into Observium
by dwalcott＠asgllc.com 20 Oct '24

20 Oct '24

Hey everyone, I had a functioning install of Observium 24.4.13528 (26th April 2024) running on Ubuntu 24.04.1 LTS, just using mysql for auth. I then tried to switch to AD by entering info in the "AD" section of the /settings web UI config page. Once I did that, I got the error below when trying to log in. I switched back to mysql login, by manually changing $config['auth_mechanism'] = "ad"; to $config['auth_mechanism'] = "mysql"; in config.php, and am able to log in again. Can anyone point me in the direction of what's wrong? array_keys(): Argument #1 ($array) must be of type array, null given in /opt/observium/html/includes/authentication/ad.inc.php:38 #0: (unknown function) called at [/opt/observium/html/includes/authentication/ad.inc.php:38] 33: } 34: } 35: 36: // If no access control groups are specified, use the defined level groups as access control 37: if (!is_array($config['auth_ad_group'])) { 38: $config['auth_ad_group'] = array_keys($config['auth_ad_groups']); 39: } 40: 41: // Synthesize Base DN from configured domain name, if it is not set 42: if (!isset($config['auth_ad_basedn'])) { 43: if (isset($config['auth_ad_domain'])) { #1: array_keys called at [/opt/observium/html/includes/authentication/ad.inc.php:38] 33: } 34: } 35: 36: // If no access control groups are specified, use the defined level groups as access control 37: if (!is_array($config['auth_ad_group'])) { 38: $config['auth_ad_group'] = array_keys($config['auth_ad_groups']); 39: } 40: 41: // Synthesize Base DN from configured domain name, if it is not set 42: if (!isset($config['auth_ad_basedn'])) { 43: if (isset($config['auth_ad_domain'])) { #2: include_once called at [/opt/observium/html/includes/authenticate.inc.php:126] 121: // Always load mysql as backup 122: include_once($config['html_dir'] . '/includes/authentication/mysql.inc.php'); 123: 124: // Load primary module if not mysql 125: if ($config['auth_mechanism'] !== 'mysql') { 126: include_once($auth_file); 127: } 128: 129: // Include base auth functions calls 130: include_once($config['html_dir'] . '/includes/authenticate-functions.inc.php'); 131: } else { #3: include called at [/opt/observium/html/index.php:72] 67: $_SERVER['PATH_INFO'] = $_SERVER['PATH_INFO'] ?? ($_SERVER['ORIG_PATH_INFO'] ?? ''); 68: 69: // Clean global $vars variable, it populated only after correct authenticating 70: unset($vars); 71: 72: include($config['html_dir'] . "/includes/authenticate.inc.php"); 73: 74: // Default theme set in global or user setting 75: if ($config['web_theme_default'] === 'system' && isset($_COOKIE['screen_scheme'])) { 76: $theme = $_COOKIE['screen_scheme']; 77: } else {

2 1

Buy subscription via invoice / bank transfer ?
by anders.jonsson＠norconsult.com 20 Oct '24

20 Oct '24

Hello, Thanks for your excellent software. We are very interested in buying a Professional Subscription subscription (to begin with) but we don't have company issued cards and not allowed to used paypal either. Is there any possibility to do a invoice / bank transfer instead ?

3 2

Custome Dashboard
by Bar Russo 15 Oct '24

15 Oct '24

Hello there. I want to know if there's an option to make a custome dashboard in the Observium that will show me CPU, Memory, Storage usage in percents like it shows me when I press on 'Health' and choose one of them. So instead of pressing on 'Health' and choose 'Processors' or 'Memory' or 'Storage' it'll show me in a dashboard of them in one dashboard. If it's possible I'll be more than glad to get help how to do it. Best regards, Bar Russo | Information Technology Phone: 03-9546064 Address: Ariel Sharon 8 blvd. Or-Yehuda Linkedin<https://www.linkedin.com/company/77639321/admin/> | Facebook<https://www.facebook.com/mgroup.mgar> | Mgrp.co.il [תמונה שמכילה גופן, גרפיקה, לוגו, עיצוב גרפי התיאור נוצר באופן אוטומטי]<https://www.mgar.co.il/>

1 0

Question about evaluation licenses
by Jonathan Sélea 14 Oct '24

14 Oct '24

Hi! I am wondering if Observium offers evaluation licensenses? I am looking into intergrating Observium with Zabbix, and noticed that Observium has a RESTful API included in the Professional License. I am however, unable to purchase a license in the current organization that I am in due to bureaucracy, and would love to have a evaluation license to we could test it for a month. Would that be possible? Thanks :) -- Jonathan Sélea

1 0

Ubuntu 24.04, rsyslogd 8.2312.0 Syslog integration
by prkjnr＠hotmail.com 11 Oct '24

11 Oct '24

Hi all, I have recently built to introduce Observium into my business. I can see Syslog entries running "tail -f /var/log/syslog" as soon as i enter config into /etc/rsyslog.d/30-observium.conf like from https://docs.observium.org/syslog/ and follow the 8.X instructions i get from an auto install version 2024-10-10T13:49:02.462169+01:00 Observium rsyslogd: action 'action-8-omprog' resumed (module 'omprog') [v8.2312.0 try https://www.rsyslog.com/e/2359 ] 2024-10-10T13:49:02.469290+01:00 Observium rsyslogd: omprog: failed to execute program '/opt/observium/syslog.php': Permission denied 2024-10-10T13:49:02.470590+01:00 Observium rsyslogd: child process (pid 565567) exited with status 1 [v8.2312.0] 2024-10-10T13:49:02.470763+01:00 Observium rsyslogd: omprog: program '/opt/observium/syslog.php' (pid 565567) terminated; will be restarted [v8.2312.0 try https://www.rsyslog.com/e/2119 ] 2024-10-10T13:49:02.470894+01:00 Observium rsyslogd: action 'action-8-omprog' suspended (module 'omprog'), retry 0. There should be messages before this one giving the reason for suspension. [v8.2312.0 try https://www.rsyslog.com/e/2007 ] 2024-10-10T13:49:03.476197+01:00 Observium rsyslogd: action 'action-8-omprog' resumed (module 'omprog') [v8.2312.0 try https://www.rsyslog.com/e/2359 ] 2024-10-10T13:49:03.485802+01:00 Observium rsyslogd: omprog: failed to execute program '/opt/observium/syslog.php': Permission denied 2024-10-10T13:49:03.486960+01:00 Observium rsyslogd: child process (pid 565568) exited with status 1 [v8.2312.0] 2024-10-10T13:49:03.487106+01:00 Observium rsyslogd: omprog: program '/opt/observium/syslog.php' (pid 565568) terminated; will be restarted [v8.2312.0 try https://www.rsyslog.com/e/2119 ] 2024-10-10T13:49:03.487173+01:00 Observium rsyslogd: action 'action-8-omprog' suspended (module 'omprog'), retry 0. There should be messages before this one giving the reason for suspension. [v8.2312.0 try https://www.rsyslog.com/e/2007 ] 2024-10-10T13:49:04.495956+01:00 Observium rsyslogd: action 'action-8-omprog' resumed (module 'omprog') [v8.2312.0 try https://www.rsyslog.com/e/2359 ] 2024-10-10T13:49:04.503258+01:00 Observium rsyslogd: omprog: failed to execute program '/opt/observium/syslog.php': Permission denied 2024-10-10T13:49:04.503510+01:00 Observium rsyslogd: omprog: program '/opt/observium/syslog.php' (pid 565569) terminated; will be restarted [v8.2312.0 try https://www.rsyslog.com/e/2119 ] 2024-10-10T13:49:04.503658+01:00 Observium rsyslogd: child process (pid 565569) exited with status 1 [v8.2312.0] 2024-10-10T13:49:04.513839+01:00 Observium rsyslogd: action 'action-8-omprog' suspended (module 'omprog'), retry 0. There should be messages before this one giving the reason for suspension. [v8.2312.0 try https://www.rsyslog.com/e/2007 ] 2024-10-10T13:49:05.519132+01:00 Observium rsyslogd: action 'action-8-omprog' resumed (module 'omprog') [v8.2312.0 try https://www.rsyslog.com/e/2359 ] 2024-10-10T13:49:05.526462+01:00 Observium rsyslogd: omprog: failed to execute program '/opt/observium/syslog.php': Permission denied 2024-10-10T13:49:05.527605+01:00 Observium rsyslogd: child process (pid 565571) exited with status 1 [v8.2312.0] 2024-10-10T13:49:05.527715+01:00 Observium rsyslogd: omprog: program '/opt/observium/syslog.php' (pid 565571) terminated; will be restarted [v8.2312.0 try https://www.rsyslog.com/e/2119 ] 2024-10-10T13:49:05.527812+01:00 Observium rsyslogd: action 'action-8-omprog' suspended (module 'omprog'), retry 0. There should be messages before this one giving the reason for suspension. [v8.2312.0 try https://www.rsyslog.com/e/2007 ] 2024-10-10T13:49:06.533091+01:00 Observium rsyslogd: action 'action-8-omprog' resumed (module 'omprog') [v8.2312.0 try https://www.rsyslog.com/e/2359 ] from a manual install 2024-10-10T12:48:21.195520+00:00 observium2 rsyslogd: action 'action-2-omprog' resumed (module 'omprog') [v8.2312.0 try https://www.rsyslog.com/e/2359 ] 2024-10-10T12:48:21.203242+00:00 observium2 rsyslogd: omprog: failed to execute program '/opt/observium/syslog.php': Permission denied 2024-10-10T12:48:21.203529+00:00 observium2 kernel: audit: type=1400 audit(1728564501.202:847): apparmor="DENIED" operation="exec" class="file" profile="rsyslogd" name="/opt/observium/syslog.php" pid=3214 comm=72733A6D61696E20513A526567 requested_mask="x" denied_mask="x" fsuid=103 ouid=1000 2024-10-10T12:48:21.203871+00:00 observium2 rsyslogd: child process (pid 3214) exited with status 1 [v8.2312.0] 2024-10-10T12:48:21.208108+00:00 observium2 rsyslogd: omprog: program '/opt/observium/syslog.php' (pid 3214) terminated; will be restarted [v8.2312.0 try https://www.rsyslog.com/e/2119 ] 2024-10-10T12:48:21.208234+00:00 observium2 rsyslogd: action 'action-2-omprog' suspended (module 'omprog'), retry 0. There should be messages before this one giving the reason for suspension. [v8.2312.0 try https://www.rsyslog.com/e/2007 ] 2024-10-10T12:48:22.213298+00:00 observium2 rsyslogd: action 'action-2-omprog' resumed (module 'omprog') [v8.2312.0 try https://www.rsyslog.com/e/2359 ] 2024-10-10T12:48:22.220546+00:00 observium2 kernel: audit: type=1400 audit(1728564502.219:848): apparmor="DENIED" operation="exec" class="file" profile="rsyslogd" name="/opt/observium/syslog.php" pid=3215 comm=72733A6D61696E20513A526567 requested_mask="x" denied_mask="x" fsuid=103 ouid=1000 2024-10-10T12:48:22.220765+00:00 observium2 rsyslogd: omprog: failed to execute program '/opt/observium/syslog.php': Permission denied 2024-10-10T12:48:22.221161+00:00 observium2 rsyslogd: child process (pid 3215) exited with status 1 [v8.2312.0] 2024-10-10T12:48:22.275077+00:00 observium2 rsyslogd: omprog: program '/opt/observium/syslog.php' (pid 3215) terminated; will be restarted [v8.2312.0 try https://www.rsyslog.com/e/2119 ] 2024-10-10T12:48:22.275233+00:00 observium2 rsyslogd: action 'action-2-omprog' suspended (module 'omprog'), retry 0. There should be messages before this one giving the reason for suspension. [v8.2312.0 try https://www.rsyslog.com/e/2007 ] 2024-10-10T12:48:23.279060+00:00 observium2 rsyslogd: action 'action-2-omprog' resumed (module 'omprog') [v8.2312.0 try https://www.rsyslog.com/e/2359 ] 2024-10-10T12:48:23.287555+00:00 observium2 rsyslogd: omprog: failed to execute program '/opt/observium/syslog.php': Permission denied 2024-10-10T12:48:23.287798+00:00 observium2 kernel: audit: type=1400 audit(1728564503.286:849): apparmor="DENIED" operation="exec" class="file" profile="rsyslogd" name="/opt/observium/syslog.php" pid=3217 comm=72733A6D61696E20513A526567 requested_mask="x" denied_mask="x" fsuid=103 ouid=1000 2024-10-10T12:48:23.288399+00:00 observium2 rsyslogd: child process (pid 3217) exited with status 1 [v8.2312.0] 2024-10-10T12:48:23.292012+00:00 observium2 rsyslogd: omprog: program '/opt/observium/syslog.php' (pid 3217) terminated; will be restarted [v8.2312.0 try https://www.rsyslog.com/e/2119 ] 2024-10-10T12:48:23.292140+00:00 observium2 rsyslogd: action 'action-2-omprog' suspended (module 'omprog'), retry 0. There should be messages before this one giving the reason for suspension. [v8.2312.0 try https://www.rsyslog.com/e/2007 ] 2024-10-10T12:48:24.296075+00:00 observium2 rsyslogd: action 'action-2-omprog' resumed (module 'omprog') [v8.2312.0 try https://www.rsyslog.com/e/2359 ] 2024-10-10T12:48:24.304221+00:00 observium2 rsyslogd: omprog: failed to execute program '/opt/observium/syslog.php': Permission denied 2024-10-10T12:48:24.304648+00:00 observium2 kernel: audit: type=1400 audit(1728564504.302:850): apparmor="DENIED" operation="exec" class="file" profile="rsyslogd" name="/opt/observium/syslog.php" pid=3218 comm=72733A6D61696E20513A526567 requested_mask="x" denied_mask="x" fsuid=103 ouid=1000 2024-10-10T12:48:24.305192+00:00 observium2 rsyslogd: child process (pid 3218) exited with status 1 [v8.2312.0] i have checked permisions -rwxrwxr-x 1 user user 3376 Feb 22 2024 syslog.php any assistance would be gratefully received

2 5

syslog entries
by Arnoldo Vidal Bravo 08 Oct '24

08 Oct '24

Hi, Every 5 minutes we are notified about the same messages sent by a device (repetitive messages). Is there a way to be notified only once a day? Or every 12 hours? example: [image: image.png] -- Saluda cordialmente

2 1

traps
by Arnoldo Vidal Bravo 08 Oct '24

08 Oct '24

Observium do not support traps? -- Saluda cordialmente

2 1

Enterprise Discord Channel - Can I get added?
by Chris Cottingham 03 Oct '24

03 Oct '24

Is there an Enterprise discord support channel for Observium? If so, can I get added to it? Enterprise license number: Bmaschke-26972681 Thanks! Chris Cottingham Systems + R&D | Apple Music 512-412-1082 ccottingham(a)apple.com

3 3

widgets
by jose.napoli＠neuralsoft.com 03 Oct '24

03 Oct '24

Can ! change the config of any widget or generate new? When clic in config show this: > $widget['widget_config']ajax/actions/edit_widget.inc.php:146 array()

3 9

footer is not showed on alert's email
by Arnoldo Vidal Bravo 02 Oct '24

02 Oct '24

Hi, Yesterday we upgrade the observium version (from 23.2.12520 to 24.8.13606), but we don't see the time when alert was generated. Would be good show (on email alert) the alert checker's name. i attach screenshots. observium 24.8.13606 [image: image.png] observium 23.2.12520 [image: image.png] Because the alert can be generated at time distinct of mail -- Saluda cordialmente

2 1

Can't see alerts.
by Bar Russo 30 Sep '24

30 Sep '24

Greetings. For some reason recently I can NOT see any alert status, if I press on 'Alerts' it is empty and doesn't show anything. Sometimes it's showing the alert for a second and then all of the alerts disappeared. I tried to reboot the Ubuntu VM and also tried to see some logs but couldn't handle it, still having this issue. I didn't change anything within the Ubuntu machine the Observium installed on so ain't got a clue what's happened. Maybe you'll be able to assist me please. Best regards, Bar Russo | Information Technology Phone: 03-9546064 Address: Ariel Sharon 8 blvd. Or-Yehuda Linkedin<https://www.linkedin.com/company/77639321/admin/> | Facebook<https://www.facebook.com/mgroup.mgar> | Mgrp.co.il [תמונה שמכילה גופן, גרפיקה, לוגו, עיצוב גרפי התיאור נוצר באופן אוטומטי]<https://www.mgar.co.il/>

1 0

Purchase multiple instances in one CC transaction
by ccollar＠voltagepark.com 20 Sep '24

20 Sep '24

Greetings, I'd like to purchase multiple instances (multiple systems, multiple DBs) of Observium Pro with one credit card transaction, and am wondering if this is possible, and if so how? Thanks!

2 1

Setting up alerts on received power
by Laurent CARON 19 Sep '24

19 Sep '24

Hi, I'd like to setup alerts on RX power levels of my optical interfaces (on juniper and cisco equipment). In the web interface, this value can be obtained @URL: /device/device=yy/tab=health/metric=dbm/id=xx/ I really can't figure how to properly build an alert checker on this. Did anyone already set it up ? Thanks

1 0

Sensor limit nominal and delta OIDs need different scaling
by Corwin Ziegler Hunts 18 Sep '24

18 Sep '24

Hi, We are trying to set appropriate limits for a frequency sensor. There are OIDs for the nominal frequency and the acceptable deviation from it. The problem is the nominal OID needs 0.1 scaling while the deviation OID needs 1 scaling (the measured value needs 0.1 scaling). Is there a way to handle this? We tried using 'limit_scale' but that applies the same scaling to both the nominal and delta limits. The specific device is a CyberPower ATS PDU. The OIDs are ePDU2SourceStatusSourceAFrequency, ePDU2SourceStatusSourceBFrequency, ePDU2SourceStatusNominalFrequency and ePDU2SourceConfigFrequencyDeviation. Corwin

1 0

API Error 500
by Nicolas Korten 18 Sep '24

18 Sep '24

Hello dear Observium Team, I'm trying to add a device using the API and get an error 500 message instead of the expected notice that the device is not respondig to snmp. > curl -u korten:secret https://observium.domain.net/api/v0/devices/ -X POST -d '{"hostname":"pe-lab02.domain.net", "snmp_community":"test", "ping_skip":"on"}' <h1>500 Internal Server Error</h1><h3>flight\Engine::_json(): Argument #2 ($code) must be of type int, string given, called in /opt/observium/libs/flight3/core/Dispatcher.php on line 86 (0)</h3><pre>#0 /opt/observium/libs/flight3/core/Dispatcher.php(86): flight\Engine->_json() #1 /opt/observium/libs/flight3/core/Dispatcher.php(50): flight\core\Dispatcher->runEvent() #2 /opt/observium/libs/flight3/Engine.php(113): flight\core\Dispatcher->run() #3 [internal function]: flight\Engine->__call() #4 /opt/observium/libs/flight3/core/Dispatcher.php(287): call_user_func_array() #5 /opt/observium/libs/flight3/Flight.php(143): flight\core\Dispatcher::invokeMethod() #6 /opt/observium/html/api/v0/includes/devices.inc.php(133): Flight::__callStatic() #7 [internal function]: api_add_device() #8 /opt/observium/libs/flight3/core/Dispatcher.php(250): call_user_func_array() #9 /opt/observium/libs/flight3/core/Dispatcher.php(237): flight\core\Dispatcher::callFunction() #10 /opt/observium/libs/flight3/Engine.php(508): flight\core\Dispatcher::execute() #11 /opt/observium/libs/flight3/core/Dispatcher.php(86): flight\Engine->_start() #12 /opt/observium/libs/flight3/core/Dispatcher.php(50): flight\core\Dispatcher->runEvent() #13 /opt/observium/libs/flight3/Engine.php(113): flight\core\Dispatcher->run() #14 [internal function]: flight\Engine->__call() #15 /opt/observium/libs/flight3/core/Dispatcher.php(287): call_user_func_array() #16 /opt/observium/libs/flight3/Flight.php(143): flight\core\Dispatcher::invokeMethod() #17 /opt/observium/html/api/v0/index.php(66): Flight::__callStatic() #18 {main}</pre> As far as I can see, the error is in: api/v0/includes/devices.inc.php at line 133: >Flight::json($json, '400'); should be: Flight::json($json, 400); Agree? Thank you and have a nice day, Nico -- Nicolas Korten Dipl.-Ing. Systemtechnik und Dienste/EDV komro GmbH Am Innreit 2 DE-83022 Rosenheim Telefon: +49 8031 365 7913 Telefax: +49 8031 365 7699 Mail: korten(a)komro.net / http://www.komro.net __________________________________________________________________________________________________________ Geschäftsführer: Dipl. Ing. Gert Vorwalder Vorsitz im Aufsichtsrat: Oberbürgermeister Andreas März Sitz der Gesellschaft: Rosenheim Registergericht: Traunstein, HRB-Nr. 10689 USt.-IdNr.: DE 188814299 Hinweise zur Verarbeitung Ihrer personenbezogenen Daten gem Art. 13 DSGVO: Verantwortlich für die Verarbeitung Ihrer personenbezogenen Daten im Rahmen des vorliegenden Kontakts ist die komro GmbH Weitere Informationen zur Verarbeitung Ihrer Daten, insbesondere zu den Ihnen zustehenden Rechten, können Sie unserer Homepage unter https://www.komro.net/datenschutz entnehmen oder auf jedem anderen Wege unter den o.g. Kontaktdaten bei uns erfragen.

4 7

Group section not working in Status Summary widget
by Ricardo Puig 16 Sep '24

16 Sep '24

Dear Observium Team, The group section in Status Summary widget is pointing to nowhere (javascript:void(0)) Regards.

1 0

NAT Counters Cisco
by Arnoldo Vidal Bravo 12 Sep '24

12 Sep '24

Hi. How can I get a NAT's sessions total from Cisco ASR-1002X? We get SNMP results by snmp v2 and Observium version is 23.8.12.912. I must enable NAT MIB, but ¿where is an example? NAT MIB can be enable after add the device? -- Saluda cordialmente

2 1

Hello.
by Bar Russo 12 Sep '24

12 Sep '24

I want to subscribe because I need some help with the metrics of the Observium. [cid:image001.png@01DB04FB.F42B1C50] בר רוסו | מערכות מידע מייל: barr(a)mgrp.co.il<mailto:barr@mgrp.co.il> קבוצת Mgroup | אריאל שרון 8, אור יהודה www.mgrp.co.il<http://www.mgrp.co.il>

2 2

Alert Checker association "Storage Description" major problem
by kalafus＠energotel.sk 10 Sep '24

10 Sep '24

Hello, Creating storage alert checker using entity association "Storage Description" renders page https://observium.xxx.sk/alert_checks/ totally unavailable (just blank whole page). Deleting that alert makes it work again. Looking for a solution...

3 4

Unix agent not working on non-default port
by ricardo＠banak.com 09 Sep '24

09 Sep '24

We have several devices behind a NAT that require using an agent_port other than 36602. Even though I have changed the port in the GUI, the poller seems to continue using the standard port. It seems to me that $device['attribs']['agent_port'] has not been populated. Running 24.9.13634 Pro on debian 12. Thank you. Ricardo Puig

2 2

The graphs for few network devices not getting displayed
by Renuka Arya 09 Sep '24

09 Sep '24

Hi Team! We are running Observium pro version Observium 24.6.13582(stable). Lookslike the memory,processor and network graphs are seeing a draw error. You can still the values beside but it wont draw the graphs. It says "Draw error"/nan I looked into the permissions for the rrd folders for these devices and did change a non-working one similar to a working one as root:observium but that did not fix the issue. I also tried deleting (which was not ideal) a device and adding it back but that did not work as well. Please guide! Thanks! Regards Renuka Arya

3 4

Incorrect sensor limits caused by duplicate unit conversion
by Corwin Ziegler Hunts 03 Sep '24

03 Sep '24

The definition for the temperature sensor on a CyberPower PDU (or UPS) environmental sensor accessory defines both "unit" and "limit_unit" as "F". This seems to cause the limit values to get converted (to Celsius) twice: first in "entity_limits_definition" using "limit_unit" and then in "discover_sensor_ng" using "sensor_unit" which is set from "unit". For us, the SNMP read limits of 59 and 90 F end up as -9.44 and 0.12 C on the sensor in Observium. This is on version r13629. Simply not setting "limit_unit" is a workaround if both the sensor and limit values use the same unit (maybe that is preferred when defining sensors?). If the units are different a proper fix is needed. Also, is this the preferred method for reporting this kind of issue? Corwin

2 3

How to add a device which only responds to ping/icmp?
by Thomas Stather 22 Aug '24

22 Aug '24

Hi How can i add a device which cannot (!) speak any snmp and only responds to ping/icmp requests? We have an Aruba wlan setup (Mobility Master and two Mobility Controllers) and i want to add the aps to Observium, so that they are monitored but only by ping/icmp. (The MM and the two MCs are already added to Observium, but i cannot see if one AP went offline or came back online again) The aps cannot speak any snmp when managed by the MM or MC, thats why it fails when i try to add one via ./add_device.php I appreciate any help :) Best, Thomas -- Thomas Stather IT Services VCP4, VCP6-DCV, VCP6.5-DCV Tel: +49 6221 486 628 Fax: +49 6221 486 561 Bevor Sie diese Mail ausdrucken, prüfen Sie bitte ob dies wirklich nötig ist. Umweltschutz geht uns alle an!

10 15

Observium doesn't show interfaces within VPRN on Nokia routers
by Tao Zhang 20 Aug '24

20 Aug '24

Hi Observium team, We are using Observium as a main tool to monitor our router interfaces and collect SNMP stats. We recently replaced our Juniper routers with Nokia SR 7750. We noticed that Observium doesn't work very well with Nokia routers. Observium can only show the interfaces in the master instance, not the interfaces within VPRN or VPLS instances (Nokia call those interfaces SAPs). To be able to see interfaces within VPLS or VPRN, we need to enable two other MIBs, TIMETRA-SAP-MIB and TIMETRA-VRTR-MIB. We are not sure how to enable those two MIBs. Do we need to add them manually? This is the MIBs enabled on the Nokia router (default). [cid:ece89bfc-3ae2-4dcd-9c7c-641c3978f803] Any suggestion is greatly appreciated. Thanks, Tao

1 1

Re: How to add a device which only responds to ping/icmp?
by Croene Jan (PZ Antwerpen) 20 Aug '24

20 Aug '24

Dear, We bought the license to monitor devices via ping-check (with the probe functionality). "Observium is designed to collect and display data from SNMP-capable devices, but not every device supports SNMP. In order to monitor non-SNMP capable devices, the probes system can be used to perform checks on non-SNMP devices". I am just wondering how we can add a device in observium that cannot handle snmp? ________________________________ Als u niet de beoogde ontvanger van deze email bent, lees onze disclaimer<https://www.politie.be/nl/maildisclaimer>. Si vous n'?tes pas le destinataire pr?vu de cet email, lisez notre disclaimer<https://www.politie.be/fr/maildisclaimer>. Wenn Sie nicht der beabsichtigte Empf?nger dieser email sind, lesen Sie unseren disclaimer<https://www.politie.be/de/maildisclaimer>. If you aren't the intended recipient of this email, read our disclaimer<https://www.politie.be/en/maildisclaimer>.

2 1

Observium stops displaying stats for all monitored hosts for a period of time
by Kevin Riahi 20 Aug '24

20 Aug '24

Hello Team, It seems Observium stops displaying stats for all (most) monitored hosts for a period of time and then back to normal.!!! I've attached a few screenshots. Has this behavior been documented in the past? If not what is the best way to debug this. Observium ver 24.8.13606 Running on a dedicated server. 12 Core Xeon Proc 64 GB RAM Raided SSD drives. Thank you Kevin Riahi

3 3

Running on a subdomain
by d.wiersma＠dw-its.nl 20 Aug '24

20 Aug '24

Hi, I want to run overservium on a subdomain. My main domain is https://dw-its.nl Is it possible to run in under observium.dw-its.nl?

2 1

Bandwidth alerts based on value in "Device Port Parsed Speed"
by Brad Bendy 14 Aug '24

14 Aug '24

Hi, Checked around and can't figure out a way to do this and don't see anything in mailing list about it. Is there a way to build alerts based on the bandwidth value we are setting this way? For example we have a description of "[600Mbit]" and then want to alert on 80% of this value for example. I don't see a way to do this as the test conditions are all the parameters from SNMP. Obviously can make up a checker and do the math manually and what not but would not auto adjust and I need 100+ of these created. Would anyone else find this helpful? Thanks

1 0

Missing some nice stats from Cisco 9800 that I got from Cisco 5520
by andri＠harpa.is 12 Aug '24

12 Aug '24

Hi Our organization recently upgraded from Cisco 5520 WLC to Cisco 9800 WLC. In observium I get really good statistics about wireless client count and wireless ap count on the 5520 but not on the 9800. I am not sure if this is something on observium side or cisco side. But I wanted to ask if anyone has the same issue and if they found a solution. Or maybe this is just something that needs to be added. Please let me know if there is any further information I can submit. Best regards Andri

4 6

aerohive devices
by antero.vasconcelos＠truenet.pt 09 Aug '24

09 Aug '24

Hi team is there a way to view the wlans on aerohive AP and connected clients? what mib shoud be enabled? Anterov

2 1

Bug report: Broken scaling on some SFP receive power graphs
by Corwin Ziegler Hunts 09 Aug '24

09 Aug '24

Hi Observium team, We're having issues with some of the generated graphs. Some of our devices report the light level received by SFPs using mW (rather than dBm). We are on the latest stable revision (13582). Issue 1: The graphs generated by Observium for these sensors usually show an excessive scale of at least -100 mW to 100 mW when the data in the specified time interval are entirely within the range 100 nW to 1 mW and usually only a small chunk of that. The calculated minimum and maximum values shown below the graph are correct. These graphs worked properly in the past with a prior version of Observium. Issue 2: Selecting and deselecting the Force Autoscale option appears to have no effect on the generated graph or displayed rrd graph command. Manually running the generated rrd graph command after removing the "--alt-autoscale" option results in a good graph. Here is the raw SNMP output for one of the these sensors showing a current value of 0.5560mW: ENTITY-SENSOR-MIB::entPhySensorType.1000004631 = INTEGER: watts(6) ENTITY-SENSOR-MIB::entPhySensorScale.1000004631 = INTEGER: milli(8) ENTITY-SENSOR-MIB::entPhySensorPrecision.1000004631 = INTEGER: 4 ENTITY-SENSOR-MIB::entPhySensorValue.1000004631 = INTEGER: 5560 ENTITY-SENSOR-MIB::entPhySensorOperStatus.1000004631 = INTEGER: ok(1) Corwin

5 12

Switch overview: configurable interface sorting?
by Wiethoff, Helge 06 Aug '24

06 Aug '24

Hello everyone, The port sorting in the device overview has been changed at some point. Previously, it was sorted alphanumerically, but now the numbers are prioritized. Before, the order was A1, A2, A3..., B1, B2, B3, etc. And now it is A1, B1, A2, B2..., A3, B3, etc. Is there a way to change the sorting back to the old method using a configuration switch? Thank you and best regards Helge

2 1

Percent CPU
by Arnoldo Vidal Bravo 05 Aug '24

05 Aug '24

Hi, cuestion. we have about 600+ devices (switchs, wireless, router), we want know CPU usage on each one . On many devices we see 93% CPU usage. but login into device we can see only 1 measure and shows less than 7% on slot 0.0. While on observium we have 3 measures: processor, processor 1 and slot 0.0. please helpus to get the right measure. example [image: image.png] [image: image.png] [image: image.png] on centos 7 from CLI [image: image.png] -- Saluda cordialmente

1 0

Missing rebuild buttons for groups and alert checkers
by Corwin Ziegler Hunts 05 Aug '24

05 Aug '24

Hi, We use Observium groups extensively, often nested several times. Our alert checkers then reference these groups. After making changes to a group, including by adding a device, we used to force rebuilds of the groups (possibly several times) and checkers so the changes would propagate all the way through. We are on the latest stable revision (r13582) and the rebuild buttons are no longer available in the UI (possibly removed in r13391). What should we do now when we need to forcibly propagate changes? Corwin

2 2

Oxidized Integration?
by Wiethoff, Helge 05 Aug '24

05 Aug '24

Hi, I am currently testing a replacement for rancid. Rancid has worked for a long time, but adding new device classes feels more and more unwieldy. Oxidized [1] makes a good first impression and I was able to add new device classes without big problems. Then of course I would also like to see an integration with my favorite network management tool :-) There are people who have already worked on this: https://github.com/colin-stubbs/observium-oxidized It looks like this patch doesn't quite work for current observium versions, so I'd like to ask if anyone is working on it and what are the chances that there could be an Observium integration (professional edition)? Thanks Helge [1] https://github.com/ytti/oxidized

3 4

Polling - Real time port graphs are different on devices that run Linux natively
by ruben.aninoiu＠zananet.com 31 Jul '24

31 Jul '24

Hi Guys, I have noticed that the real-time graphs for devices that run Linux natively (JunosOS, UnifiOS, etc) display the traffic with "intervals in between". The non-native Linux devices (FortiOS, Cisco IOS) provide a nicer real-time graph for port traffic when polled. Is there something that could be adjusted so that the native Linux devices show the nicer graph? Best regards, Ruben

2 1

Status of OBS-4873
by Williams Sr., Mark Charles (Fed) 31 Jul '24

31 Jul '24

Hello Adam, Following up on the status of OBS-4873 (Oops during discovery of Dell N4000 Series Switches). Or Was this the correct place to send Maintenance issues? Mark C Williams Sr. Scientific Systems | Research Services Office Office of Information Systems Management National Institute of Standards and Technology (NIST) US Dept of Commerce

1 0

Abend on alert checker
by Joey Stanford 25 Jul '24

25 Jul '24

2 3

F5 Device not discovered
by dariusz.nowak＠contemi.com 24 Jul '24

24 Jul '24

Hi All, First email - welcome! I believe got small problem with discovering my F5 device , see below screenshot: https://postimg.cc/D4vm9mm8 Please correct me If I'm wrong but these F5 MiBs should not fail yeah? Now device is discovered with OS: F5 BIG-IP 16.1.0 Build 0.28.19 Engineering Hotfix (afm apm asm avr ltm) And I have basic stats like Network interfaces but nothing related to virtual servers that I believe is in other MIBs. Can somebody point me in right direction where to start troubleshoot this? Thanks Dariusz

2 2

Many devices shown as down(dns)
by Marios.P＠crowe.com.cy 19 Jul '24

19 Jul '24

Hello all, I can see in my observium installation that many devices changed their status to down(dns). This is a new installation and we migrated the configuration yesterday on a new server and devices were working properly. At around the same time (14:20:00) a lot of our machines changed their status to down. The message in the Event log is "Device status changed to Down (dns)". I tried to find what the problem may be but I can see SNMP are correct and dns records exist for the systems. Any ideas? Thank you, Marios

6 7

BGP alert
by Arnoldo Vidal Bravo 25 Jun '24

25 Jun '24

hi, in the observium's web keeps [image: image.png] This alert box appears from sunday (expected, we change of isp) but now is wednesday and show 0s. not 2d or real time since down we can disable this alert? without disable all bgp sessions -- Saluda cordialmente

2 1

Apache / https hung after updating Observing
by Roger Larsen 24 Jun '24

24 Jun '24

Dear Observium Community We have for several times experienced problem after Obsevium Professional update. Today we updated from 24.4.13501 to 24.6.13582 (by using $ svn update & $ ./discovery.php -u) OS CentOS Linux release 7.9.2009 (Core) updated today w/ kernel: 3.10.0-1160.119.1.el7.x86_64 After restarting server we struggle logging in to WebGUI. Apache /httpd is complaining on “to many concurrent connections”. Are there any suggestion on how to update Observium without getting these problems? Any householding processes needed for a better update? Or maybe we need to be more patient and give the server some more minutes after update? Today we waited 30 minutes, and still not able to login… R Austevoll Breiband AS - LYSGLIMT Roger Larsen Teknisk sjef / CTO Tlf +47 9523 7640 / +47 5508 0111 Epost roger.larsen(a)ikt.lysglimt.net<mailto:roger.larsen@ikt.lysglimt.net> [signature_3169845242] www.lysglimt.net<http://www.lysglimt.net> Denne e-posten er beregnet for den institusjon eller person den er rettet til og kan være belagt med lovbestemt taushetsplikt. Dersom e-posten er mottatt ved en feil, vennligst returner den til Austevoll Breiband AS og slett den fra systemet. This email with attachments is solely for the use of the individual or entity to which it is addressed. It may contain information that is confidential or legally privileged. If you are not the intended recipient, please return the e-mail to the Austevoll Breiband AS without producing, distributing or retaining copies thereof.

3 3

incomplete list of windows services
by Tony Guadagno 21 Jun '24

21 Jun '24

Hi, I have noticed (now that I am looking) that the list of services on my windows servers is incomplete. In particular, I installed a service about 1 month ago on all my servers and this services does not show on any server in Observium. Can someone tell me how to start troubleshooting this issue? thanks Tony

2 3

Import end devices via CSV - What's the format?
by Chris Cottingham 17 Jun '24

17 Jun '24

I want to import a lot of my devices via a CSV file. I know there is a way to import from the command line but I don’t see much on the file format for the command line utility. Anyone know the best way to import a lot of devices quickly? Is a CSV the best way to go? Thanks!!

2 1

Trial version help
by Chris Humphreys 13 Jun '24

13 Jun '24

Hi all, We are trialling the software and it was working fine but now when accessing the site we get this message. “DB not connected, please check database connection configuration. DB Error 2002: No such file or directory” Any ideas how I might be able to sort this? Thanks Chris Humphreys Senior IT Infrastructure and Applications Manager (m) +44 7852 040601 www.fladgate.com<https://www.fladgate.com/> for Fladgate LLP (p) +44 20 3036 7151 Address click here<https://www.fladgate.com/contact-us> [cid:image001.jpg@01DABCBC.07213020] [Twitter]<https://twitter.com/fladgatellp> [LinkedIn]<https://www.linkedin.com/in/chris-humphreys-1b199535/> [cid:image004.jpg@01DABCBC.07213020]<https://www.fladgate.com/> ----------------------------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachments are CONFIDENTIAL to the named recipient(s) and may be legally privileged. If you are not a named recipient please notify us and ensure that this e-mail is deleted and not read or copied or disclosed to anyone else. E-mail may be corrupted, intercepted or amended and so we do not accept any liability for the contents received unless they are the same as sent by us. E-mail sent or received using our system may be monitored, intercepted or read by us before or after it reaches the recipient; if you reply to this message you consent to this activity in relation to your response. Fladgate LLP is a limited liability partnership, registered in England and Wales with registered number OC334334. It is authorised and regulated by the Solicitors Regulation Authority, number 484783. The term partner is used to refer to a member of Fladgate LLP. A list of members is available at the above registered office. For more information, including our Terms of Business and Personal data processing notice, please visit http://www.fladgate.com -----------------------------------------------------------------------------------------------------------------------------------------

3 2