- observium - lists.observium.org

Subscription Version not showing "Storage" correctly?
by Dano, Leo 18 Jul '16

18 Jul '16

Hello all, I have two instances of Observium running with two different hostnames. One is Community and one is the Subscription version. My Community version on is showing storage correctly. My Subscription version is not. All the partitions are showing as 100% free and green when I know / can't be 0bytes as well as all other partitions. Is this a bug? Thanks, ----------------------- Leo Dano

2 3

How does SYSLOG Alerting work?
by Сережка Хомяков 18 Jul '16

18 Jul '16

Hello! Thanks for higly awaited feature with SYSLOG alerting! Just playing with it, I was unable to make it working (of course, with knowledge of PCRE). The example of my test Alert was based on *SYS-5-CONFIG_I:Configured* message from IOS router. Can you advice on how the regexp should look like and how does SYSLOG Alerter work - on a poll or triggered on a log receipt? -- Best, Sergey

2 2

alert 'time of recovery' reports recovery of previous recovery...
by Henrik Cednert (Filmlance) 18 Jul '16

18 Jul '16

Hello This was touched upon in another discussion but as a sidetrack no solution was found. Pretty much all my alerts 'time or recovery' reports the time of this entities PREVIOUS recovery. So the time reported are always pretty bonkers. I can see that with the help of timestamp on the emails , slack notifications and the timestamp of previous recovery. And for the very first recovery of a device/sensor the duration is list as "unknown". Any idea of what's going on and what I can kick on to make it work properly? =) Cheers and thanks -- Henrik Cednert cto | compositor Filmlance International | www.filmlance.se mobile [ + 46 (0)704 71 89 54 ] skype [ cednert ]

2 2

Alert on device status = degraded
by Daniel Horth 18 Jul '16

18 Jul '16

Howdy all I have a steelhead that is showing “Degraded” status in Observium due to a power supply issue. In Observium I can see the status “degraded” at this location: https://observium/device/device=12/tab=health/metric=status/id=123/ I can also see that the status changed 8 days ago. DB sample:  <database name="observium">  <table name="status"> <column name="status_id">123</column> <column name="status_deleted">0</column> <column name="device_id">12</column> <column name="poller_type">snmp</column> <column name="status_oid">.1.3.6.1.4.1.17163.1.1.2.7.0</column> <column name="status_mib">NULL</column> <column name="status_object">NULL</column> <column name="status_index">systemHealth.0</column> <column name="status_type">steelhead-system-state</column> <column name="status_descr">System Health</column> <column name="entPhysicalIndex">NULL</column> <column name="entPhysicalClass">chassis</column> <column name="entPhysicalIndex_measured">NULL</column> <column name="measured_class">NULL</column> <column name="measured_entity">NULL</column> <column name="status_ignore">0</column> <column name="status_disable">0</column> </table>  <table name="status-state"> <column name="status_id">123</column> <column name="status_value">30000</column> <column name="status_polled">1468819524</column> <column name="status_last_change">1468104632</column> <column name="status_event">alert</column> <column name="status_name">degraded</column> </table> </database> I am trying to set up an alert in Observium such that when a device status / System Health changes I am notified. Is there a way to access values from status-state table in setting up alerts? Thanks

2 2

pps metic
by Matthias Cramer 16 Jul '16

16 Jul '16

Hi There Is there a metric for normal packets per second and not only unicast packets (ifInUcastPkts_rate) and also a metric for non unicast packets per second. According to the doc at http://www.observium.org/docs/entities/#metrics_1 this is not existent... I would like to make an alert on high pps and if possible on high non unicast pps. Any hint is appreciated. Regards Matthias -- Matthias Cramer / mc322-ripe Senior Network & Security Engineer iway AG Phone +41 43 500 1111 Badenerstrasse 569 Fax +41 44 271 3535 CH-8048 Zurich http://www.iway.ch/ GnuPG 1024D/2D208250 = DBC6 65B6 7083 1029 781E 3959 B62F DF1C 2D20 8250

2 3

Tripp-lite UPS Alerts
by Johnston, Tom 15 Jul '16

15 Jul '16

I’m trying to set up alerting for our tripplite when it goes on battery. I cannot get it to work properly for some reason. Entity Type: Status Check Conditions: upsOutputSource.0 ne normal Device Match: os eq poweralert Entity Match: * Observium Version: 0.16.7.7983 (professional) -A debug from observium yields a value of: upsOutputSource.0 = normal (the normal changes to state of “Battery” when on battery) -Even if I change my check conditions to eq normal to test the alert it does not trigger an alert. -I also tried check conditions of * and that did not help. Also we lost power and the event log showed the following: -Also tried just upsOutputSource (without the .0) Source of Output Power<http://epsobservium.isd273.org/device/device=337/tab=health/metric=status/i…> Status Alert: hs-6509-ups.isd273.org Source of Output Power entered ALERT state: battery (previous: normal) Any help would be appreciated -Tom

2 1

Setting up LDAP Auth
by Dano, Leo 15 Jul '16

15 Jul '16

Hello all, Anyone care to share your config settings? I am having a hard time setting this up. Please remove your domain info in the reply. /opt/observium/config.php Thanks, ----------------------- Leo Dano

8 20

Toner History Graphs
by Richard Franks 15 Jul '16

15 Jul '16

I have a bit of an odd one. I have two printers in my observium install. One has been in for ages (an HP laser jet), the other I added a couple of weeks ago (A sharp MFD photocopier thingy). By the looks of things, the HP has been collecting data correctly for ages, and graphing it nicely. I can see the pretty line that shows that the toner has reduced over time. Oddly, it stopped collecting on the 7th July, and hasn’t graphed anything since then. The Sharp, which has been in less time (since Thursday 7th), has never graphed its toner properly. They are both showing the correct level of toner (well, the Sharp is showing two of them at -3, but I’ve checked the snmp output, and it’s returning -3, so that’s nothing to do with observium). Even more weirdly, the toner level on the weekly graph is showing the correct number. The rest show -nan% The Sharp: The HP: I don’t know much about how the graphing side of things works, so I don’t have much knowledge with which to do any debugging, but happy to send more debug info if required! Thanks, Richard

1 0

Exim Volume Count
by Tiago Reis 15 Jul '16

15 Jul '16

Hi, There is anyone here that already create on the exim service for Observium something that reads the volume of sends an not the mail queue? Kind Regards, Tiago Reis

1 0

Incorrect free physical memory for Unix hosts
by Oliver Baker 15 Jul '16

15 Jul '16

Hi, Loving Observium in general but the only issue I'm having is that for all our Unix-like hosts the free memory is reported too literally to be useful. The cached memory pool is included in the "used memory" count, causing almost all our hosts to appear as having less than 5% free physical memory. Is there a way to get free memory not including the cached memory pool? Currently the alert checker I'm using is flagging all our hosts as "out of memory" Many thanks in advance Oliver B

3 8