- observium - lists.observium.org

Proxmox support
by Marco Bungalski 23 Apr '25

23 Apr '25

Is there a plan for Observium to support Proxmox? This also includes the display of individual VMs, as is done with VMware. Best Regards, Marco

2 1

Wrapper discovery misbehaving
by Milton Ngan 18 Apr '25

18 Apr '25

I am running multiple pollers, and we just noticed that the discovery of new hosts is not doing what we would expect when trying to partition the workload. Instead of doing a third of the new hosts, it does a third of all the hosts, essentially doing a full discovery, which is causing some our PDU’s to get overloaded, since they are being hit by 3 parallel discoveries and also possibly a poll at the same time. /opt/observium/observium-wrapper discovery --host new -i 3 -n 0 If I remove the -i and -n options, then it does what I would expect, although it is not distributed, which isn’t a problem because the number of new devices should be pretty small. So the --host and the -i and -n options appear to be mutually exclusive, which isn’t stated in the help at all.

2 1

Netstat Missing
by observium＠lsl-technology.com 17 Apr '25

17 Apr '25

If I look at the list of devices, when I select any of the network devices and select Graphs, the dropdown menu has an item called NETSTATS ... This item is not available if I select a VM or a server and select Graphs. How do I view network stats on any of my server devices, be them VM or physical server? Thanks Lawrence

2 1

Removing questions in Observium forum/personal info
by scott.brucher＠nelsongp.com 17 Apr '25

17 Apr '25

I asked a question with my work email and of course forgot to remove my signature. How do I remove all my information? Getting a lot of BOT and sales calls.

3 2

Send email alerts only for some checkers, not all of them
by Silvio del Val Hinojal 11 Apr '25

11 Apr '25

Hello, First of all, congratulations for your great product :) I have been searching this the forum but I can't find an answer for this :( We are currently using Observium Pro v18.10.9500. I'm trying to configure emailing so that I would like to be notified on some alerts generated by some of the alert checkers but not all of them, but I'm not able to do it :( Currently I'm receiving email alerts from all of my checkers. This is my current "config.php": // Set up a default alerter (email to a single address) // $config['email']['default'] = ""; // $config['email']['default_only'] = TRUE; $config['email']['from'] = "< I omit this part, this is our current email, this is working >"; $config['email']['smtp_host'] = "< I omit, our SMTP email server >"; $config['email']['backend'] = "smtp"; // Mail backend. Allowed: "mail" (PHP's built-in), "sendmail", "smtp". $config['email']['smtp_timeout'] = 30; We have only one contact with our destination email address and we have associated only 4 of 7 defined alert checkers, but we are currently receiving email notifications from all of them. Thank you very much [cid:image001.png@01D03B1C.E8E96F80]<http://www.pandasecurity.com/spain/> Silvio del Val Systems Engineer - Panda Security +34 944 343 728 silvio.delval(a)pandasecurity.com<mailto:silvio.delval@pandasecurity.com> pandasecurity.com<http://www.pandasecurity.com/> This e-mail contains confidential information owned by Panda Security. Any such copy, or use, or distribution or disclosure of its contents is strictly forbidden. Please notify us immediately at our phone number (+34 94 425 11 00) if you receive this e-mail and are not its consignee, and then delete this message from your system without copying it, distributing it, or disclosing its contents P Before printing this message, please make sure it is really necessary

5 9

PHP Fatal error
by Henrik Aarfeldt 26 Mar '25

26 Mar '25

Hi, We're running the latest version of Observium. Today we get "PHP Fatal error: html_callback_build_title(): Cannot use output buffering in output buffering display handlers in /opt/observium/html/includes/functions.inc.php on line 130" Returns a blank page (after ok login) -- Best regards, Henrik. ________________________________ Region Hovedstaden anvender de personoplysninger, du giver os i forbindelse med din henvendelse. Du kan læse mere om formålet med anvendelsen samt dine rettigheder på vores hjemmeside: www.regionh.dk/persondatapolitik

3 4

SVN Log not updated
by Thomas Schreiner 23 Mar '25

23 Mar '25

Hello, is the update of the SVN log broken? Neither https://changelog.observium.org nor observium.org/svn.log are updated since 20.2.2025. Best regards Thomas

3 2

Odd issues after recent upgrade:
by Duncan 22 Mar '25

22 Mar '25

Hello all, Environment: Observium CE 24.12.13800, home lab. Rocky Linux release 9.5 (Blue Onyx) VM on ESXi. Problem: Since upgrading recently, I've had issues with constant "Processors: 1 deleted.", "Processors: 1 added." log entries, looks like against Ubiquiti gear only. I've tried splitting the scans: 00 */6 * * * root /opt/observium/discovery.php -i4 -n0 >> /dev/null 2>&1 10 */6 * * * root /opt/observium/discovery.php -i4 -n1 >> /dev/null 2>&1 20 */6 * * * root /opt/observium/discovery.php -i4 -n2 >> /dev/null 2>&1 30 */6 * * * root /opt/observium/discovery.php -i4 -n3 >> /dev/null 2>&1 But it's still persisting. Somewhat irritating... Charts end up looking like this, and clearly going to miss something in the eventlog... I've always had issues monitoring my Ubiquiti kit, butit seems to have got worse: "sysDescr -> ''" "sysDescr -> 'Ubiquiti UniFi UXG-Lite ~blah~'" "WARNING! Ports snmpwalk did not complete. Try to increase SNMP timeout on the device properties page." (set to 30 already) Many thanks in advance for any solutions!

2 1

Alert Checker for inactive switch ports
by blub＠kabelbw.de 21 Mar '25

21 Mar '25

Is it possible to create an alert checker that reports ports that have been inactive for more than two months? Thanks in advance Dilbert

2 2

Incorrect data in ArcGIS geocoding
by Stephen Kent 19 Mar '25

19 Mar '25

I noticed when adding geolocation info to devices, I would consistently get incorrect data regardless of address format for ArcGIS in Observium and when using the test_geo.php script. Specifically, the United States address's "State". My preferred format is the NeDi hierarchical format<https://www.nedi.ch/documentation/index.html> (US;CA;Anaheim,1234 Main Street;2nd Floor;Server Room). Even using a typical format, info is incorrect. (1234 Main Street, Anaheim,CA) I suspect ArcGIS is returning the correct info, but the php is stuffing the data in the wrong fields. I don't know php enough to confirm. So below is a query using typical US address format. /opt/observium# ./test_geo.php -a arcgis '1313 disneyland dr anaheim, ca' +--------------------------------+ | Location | +--------------------------------+ | 1313 disneyland dr anaheim, ca | +--------------------------------+ +----------+------------+--------------+---------------+------------+--------+---------+-------+ | Geo: API | Lat | Lon | Country | State | County | City | Error | +----------+------------+--------------+---------------+------------+--------+---------+-------+ | arcgis | 33.8144249 | -117.9249177 | United States | Disneyland | Orange | Anaheim | | +----------+------------+--------------+---------------+------------+--------+---------+-------+ And in NeDi format: /opt/observium# ./test_geo.php -a arcgis 'US;CA;1313 Disneyland Drive;Building 1' +----------------------------------------+ | Location | +----------------------------------------+ | US;CA;1313 Disneyland Drive;Building 1 | +----------------------------------------+ +----------+------------+--------------+---------------+------------+--------+---------+-------+ | Geo: API | Lat | Lon | Country | State | County | City | Error | +----------+------------+--------------+---------------+------------+--------+---------+-------+ | arcgis | 33.8144249 | -117.9249177 | United States | Disneyland | Orange | Anaheim | | +----------+------------+--------------+---------------+------------+--------+---------+-------+ All fields other then "State" is correct. When you run the test-geo.php in debug, we get a lot of info, but I want to point out this section: I think this is the json formatted return from ArcGIS. All this data looks correct. In particular, notice the field descriptor "StName" with value "Disneyland". I think this is where to disconnect occurs. I think there was a misunderstanding that "StName" was the "State" value, while it is actually returned in "Region" (California) I think "StName" is the street name (Disneyland). So the solution would be for the php to stuff the "State" field with the value from "Region". Not sure what Observium is doing with Street name. /opt/observium# ./test_geo.php -dd -a arcgis '1313 disneyland dr anaheim, ca' DEBUG! Load class 'Console_Color2' from '/opt/observium/libs/pear/Console/Color2.php': OK DEBUG: is_cli() == TRUE, PHP_SAPI: 'cli', REMOTE_ADDR: ''DEFINITIONS Time : 0.0343442 ms REQUEST[https://geocode.arcgis.com/arcgis/rest/services/World/GeocodeServer… REQUEST STATUS[TRUE] REQUEST RUNTIME[0.4547s] RESPONSE CODE[200 OK] RESPONSE[ {"spatialReference":{"wkid":4326,"latestWkid":4326},"candidates":[{"address":"1313 S Disneyland Dr, Anaheim, California, 92802","location":{"x":-117.924917739781,"y":33.814424874175},"score":99.5,"attributes":{"Score":99.5,"Type":"","PlaceName":"","StName":"Disneyland","City":"Anaheim","Subregion":"Orange County","Region":"California","Territory":"","Country":"USA"},"extent":{"xmin":-117.925917739781,"ymin":33.813424874175,"xmax":-117.923917739781,"ymax":33.815424874175}}]} ] > $http_response_header /opt/observium/includes/http.inc.php:195 null TRUE Response [4326] valid: [spatialReference->wkid] regex [^\d+$] /opt/observium/includes/http.inc.php:691 array( [spatialReference] => array( [wkid] => int(4326) [latestWkid] => int(4326) ) [candidates] => array( [0] => array( [address] => string(48) "1313 S Disneyland Dr, Anaheim, California, 92802" [location] => array( [x] => double(-117.92491773978) [y] => double(33.814424874175) ) [score] => double(99.5) [attributes] => array( [Score] => double(99.5) [Type] => string(0) "" [PlaceName] => string(0) "" [StName] => string(10) "Disneyland" [City] => string(7) "Anaheim" [Subregion] => string(13) "Orange County" [Region] => string(10) "California" [Territory] => string(0) "" [Country] => string(3) "USA" ) [extent] => array( [xmin] => double(-117.92591773978) [ymin] => double(33.813424874175) [xmax] => double(-117.92391773978) [ymax] => double(33.815424874175) ) ) ) ) ... > $location /opt/observium/test_geo.php:88 array( [location] => string(30) "1313 disneyland dr anaheim, ca" [location_geoapi] => string(6) "arcgis" [location_lat] => double(33.8144249) [location_lon] => double(-117.9249177) [location_city] => string(7) "Anaheim" [location_county] => string(6) "Orange" [location_state] => string(10) "Disneyland" [location_country] => string(13) "United States" [location_status] => string(315) "Geocoding ENABLED, try detect device coordinates: by FORWARD query (API: ARCGIS, sysLocation: 1313 disneyland dr anaheim, ca) - FOUND GEO API REQUEST: GEO LOCATION: United States (Country), Disneyland (State), Orange (County), Anaheim (City) GEO COORDINATES: 33.8144249 (Latitude), -117.9249177 (Longitude)" ) +----------+------------+--------------+---------------+------------+--------+---------+-------+ | Geo: API | Lat | Lon | Country | State | County | City | Error | +----------+------------+--------------+---------------+------------+--------+---------+-------+ | arcgis | 33.8144249 | -117.9249177 | United States | Disneyland | Orange | Anaheim | | +----------+------------+--------------+---------------+------------+--------+---------+-------+ Observium CE 24.12.13800 (24th December 2024) OS Linux 5.15.0-131-generic [amd64] (Ubuntu 22.04) Apache 2.4.52 (Ubuntu) PHP 8.1.2-1ubuntu2.20 (OPcache: ENABLED) (Memory: 128MB) Python 3.10.12 MySQL 8.0.41-0ubuntu0.22.04.1 (extension: mysqli 8.1.2-1ubuntu2.20) SNMP NET-SNMP 5.9.1 RRDtool 1.7.2 Fping 5.1 (IPv4 and IPv6) Fetch cURL 7.81.0 (OpenSSL/3.0.2, LibZ 1.2.11, LibIDN 2.3.2)

3 3

api integration with Aruba Central
by Sam Sarkis 05 Mar '25

05 Mar '25

Hi All, Aruba Central is aruba cloud monitoring/management platform for aruba wireless and switching. They have full API capabilities. Can we interface Observium with Aruba Central to get alerts or show status of devices ? Thanks

2 1

0mPHP Fatal error
by Shekhar Basnet 28 Feb '25

28 Feb '25

2 2

alert box
by Arnoldo Vidal Bravo 27 Feb '25

27 Feb '25

Hi A few months ago we updated observium (from 23.2.12520 to 24.8.13606) and now we don't see the alerts for monitored ports. Before we saw yellow boxes (warnings), now they don't appear. Does it no longer show that information? port down we must add something in the config file? -- Saluda cordialmente

3 4

Missing 'HttpOnly' Cookie Attribute (HTTP)
by Martin Gilhooly 27 Feb '25

27 Feb '25

subscribe Dear Support, I'm trying to correct this in my ubuntu config. I have adjusted my config. Php to no avail - see atatched. I have added the relevant to the web host: <VirtualHost *:80> # Listen on HTTP ServerName monitor.holycrossprep.com # Force a redirect to HTTPS for any requests to observium. example.com RewriteEngine On RewriteCond %{HTTPS} off RewriteRule ^ https://%{HTTP_HOST}%{REQUEST_URI} [L,R=301] RedirectPermanent / https://monitor.holycrossprep.com/ </VirtualHost> <VirtualHost *:443> ServerName monitor.holycrossprep.com DocumentRoot /opt/observium/html <FilesMatch \.php$> SetHandler application/x-httpd-php </FilesMatch> <Directory /> Options FollowSymLinks AllowOverride None </Directory> SSLEngine on SSLCertificateFile /etc/ssl/certs/holycrossprep.pem SSLCertificateKeyFile /etc/ssl/certs/holycrossprep.key <Directory /opt/observium/html/> DirectoryIndex index.php Options Indexes FollowSymLinks MultiViews AllowOverride All Require all granted </Directory> ErrorLog /error.log LogLevel warn CustomLog /access.log combined ServerSignature On </VirtualHost> Would else should I be looking at? Thank you, Martin [https://www.holycrossprepschool.co.uk/_Includes/images/banner.png] Martin Gilhooly IT Manager +44 (0)20 8942 0729 martin.gilhooly(a)holycrossprep.com<mailto:martin.gilhooly@holycrossprep.com> www.holycrossprepschool.co.uk [https://www.holycrossprepschool.co.uk/_Includes/images/hcp_logo.png] [advertisement]<https://www.holycrossprepschool.co.uk> Holy Cross Preparatory School * George Road * Kingston Upon Thames * Surrey * KT27NU CONFIDENTIALITY NOTICE, DISCLAIMER AND MONITORING: This email is intended for the person to whom it is addressed. The message and any attachments may contain confidential information. If you are not the intended recipient or have received this email in error, please notify the sender and delete the email from your computer systems. You should not make any unauthorized use of the information contained in the email. While all reasonable precautions are taken to ensure that no viruses are transmitted with this message, Holy Cross Preparatory School will not be liable for any loss or damage caused by the transmission of this message. Please note that Holy Cross Preparatory School reserves the right to monitor emails in accordance with the School IT policy.

2 2

Problem with Alert-Checkers
by jonas.meyer＠noz-digital.de 27 Feb '25

27 Feb '25

I have a problem with some alerters... Although the alert really triggers and I get the confirmation “ALERT_NOTIFIY”, I get no message. No matter if by mail, SMS or webhook. Everything works normally with other alert checkers.

4 6

Eventlog incorrectly says interface circuit attribute has changed on every poll
by Corwin Ziegler Hunts 27 Feb '25

27 Feb '25

We have some very long interface aliases (130 characters). The Observium parsed circuit ID is 66 characters but it appears to be limited to 64 characters somewhere. The annoying part is every time the device is polled a message is written to the eventlog saying the circuit ID has changed, showing the parsed circuit ID and a truncated version of it. We don't need the character limit increased (although that would be nice); we want the constant (incorrect) eventlog messages to stop (without changing the configured interface alias). (For those curious, the long circuit IDs are for circuits made of up several segments chained together from multiple providers.) Corwin

2 1

Owning alerts
by FRANKS, Andy (THE SHREWSBURY AND TELFORD HOSPITAL NHS TRUST) 12 Feb '25

12 Feb '25

Hi, This might have been asked before, apologies if so. Is it possible somehow to assign ownership of raised alerts? We operate a largish support function and have noticed people are suppressing alerts they think other people are working on, sometimes erroneously. Having notes or a ownership assignment of a raised alert might help sort this. Thanks! Andy Franks ************************************************************************************** ****************************** This message may contain confidential information. If you are not the intended recipient please: i) inform the sender that you have received the message in error before deleting it; and ii) do not disclose, copy or distribute information in this e-mail or take any action in relation to its content (to do so is strictly prohibited and may be unlawful). Thank you for your co-operation. NHSmail is the secure email, collaboration and directory service available for all NHS staff in England. NHSmail is approved for exchanging patient data and other sensitive information with NHSmail and other accredited email services. For more information and to find out how you can switch visit Joining NHSmail - NHSmail Support<https://support.nhs.net/article-categories/joining-nhsmail/>

2 2

TBOX - SNMP line not have index part"
by Bonneau Thomas 11 Feb '25

11 Feb '25

Hello, I try to add a new os and a new mib in my Observium. The device is a TBOX from Ovarro. The device is old so the bulk mode does not work. I managed to add custom OID. I managed to get metadata but sensors and status do not work because ". SNMP line 'prgrun = 1' not have index part" Is there a way to make it work? $os = "semaphore-tbox-os"; $config['os'][$os]['sysObjectID'][] = ".1.3.6.1.4.1.27982"; $config['os'][$os]['sysDescr'][] = "Configuration Energie-Annexes"; $config['os'][$os]['snmp']['nobulk'] = TRUE; $config['os'][$os]['snmp']['max-rep'] = 0; $config['os'][$os]['type'] = "power"; $config['os_group'][$os_group]['mib_blacklist'] = $config['os_group']['default']['mibs']; $config['os'][$os]['mibs'][] = "SEMAPHORE-RTU-MIB"; $mib = 'SEMAPHORE-RTU-MIB'; $config['mibs'][$mib]['enable'] = 1; $config['mibs'][$mib]['mib_dir'] = 'semaphore'; $config['mibs'][$mib]['identity_num'] = '.1.3.6.1.4.1.27982'; $config['mibs'][$mib]['descr'] = 'Semaphore RTU MIB.'; $config['mibs'][$mib]['sysname'][] = array('oid' => '.1.3.6.1.4.1.27982.1.7.2.23.0'); $config['mibs'][$mib]['version'][] = array('oid' => '.1.3.6.1.4.1.27982.1.7.2.26.0'); $config['mibs'][$mib]['sysdescr'][] = array('oid' => '.1.3.6.1.4.1.27982.1.7.2.23.0'); $config['mibs'][$mib]['syslocation'][] = array('oid' => '.1.3.6.1.4.1.27982.1.7.2.24.0'); $config['mibs'][$mib]['sensor'][] = array('oid' => 'prgrun', 'class' => 'gauge', 'descr' => 'prgrun', 'oid_num' => '.1.3.6.1.4.1.27982.1.7.1.28161'); $config['mibs'][$mib]['status'][] = array( 'oid_num' => '.1.3.6.1.4.1.27982.1.7.1.20519', 'oid' => 'presbat', 'descr' => 'presbat', 'measured' => 'presbat', 'type' => '0ok'); $type = '0ok'; $config['mibs'][$mib]['states'][$type][0] = array('name' => '0', 'event' => 'ok'); $config['mibs'][$mib]['states'][$type][1] = array('name' => '1', 'event' => 'alert'); The debug : ] prgrun [ CMD[/usr/bin/snmptranslate -On -Pu -m SEMAPHORE-RTU-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp:/opt/observium/mibs/semaphore 'SEMAPHORE-RTU-MIB::prgrun'] CMD EXITCODE[0] CMD RUNTIME[0.0094s] STDOUT[ .1.3.6.1.4.1.27982.1.7.1.28161 ] SNMP TRANSLATE (CMD): 'SEMAPHORE-RTU-MIB::prgrun' -> '.1.3.6.1.4.1.27982.1.7.1.28161' OS-specific no-bulk definition. CMD[/usr/bin/snmpwalk -v2c -c *** -Pud -Ih -OQUsb -m SEMAPHORE-RTU-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp:/opt/observium/mibs/semaphore 'udp':'fth-arch-tbox01-yvfi':'161' prgrun] CMD EXITCODE[0] CMD RUNTIME[0.0153s] STDOUT[ prgrun = 1 ] SNMP STATUS[TRUE] Warning. SNMP line 'prgrun = 1' not have index part ] o SEMAPHORE-RTU-MIB presbat [OS-specific no-bulk definition. CMD[/usr/bin/snmpwalk -v2c -c *** -Pud -Ih -OQUsb -m SEMAPHORE-RTU-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp:/opt/observium/mibs/semaphore 'udp':'fth-arch-tbox01-yvfi':'161' presbat] CMD EXITCODE[0] CMD RUNTIME[0.0146s] STDOUT[ presbat = 0 ] SNMP STATUS[TRUE] Warning. SNMP line 'presbat = 0' not have index part ] disjdepartbt [OS-specific no-bulk definition. CMD[/usr/bin/snmpwalk -v2c -c *** -Pud -Ih -OQUsb -m SEMAPHORE-RTU-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp:/opt/observium/mibs/semaphore 'udp':'fth-arch-tbox01-yvfi':'161' disjdepartbt] CMD EXITCODE[0] CMD RUNTIME[0.0144s] STDOUT[ disjdepartbt = 0 ] SNMP STATUS[TRUE] Warning. SNMP line 'disjdepartbt = 0' not have index part ] Thanks in advance. Thomas

2 6

Unexplained alerts for array controller
by eey＠pml.ac.uk 03 Feb '25

03 Feb '25

We've got a pair of new alerts for a Dell file server having several attached drive arrays. One alert clearly refers to the array controller; it is not clear to what the other refers, other than that it is storage-related. These alerts are: Drive ID 4 storage 3h 17m 52s ago alert fail Drive Controller PERC H730P Mini (Embedded) 3 storage 3h 19m 5s ago alert fail These alerts appeared immediately after starting the Systemd service dsm_sa_datamgrd, which had failed for an unknown reason. I believe this service runs an agent for the Dell OpenManage monitoring portal. Even after the restart of this service, that portal is reporting that it cannot communicate with the system. The iDRAC for this system reports no faults, and all relevant lights on it are green. The system appears to be working, in that the files it serves are available as normal. Do you have any ideas how to take this investigation forward? I see that a similar thread https://lists.observium.org/hyperkitty/list/observium@lists.observium.org/m… was opened nearly a year ago, but this did not receive any responses.

1 0

MIB integration
by Pavel Vraštiak 02 Feb '25

02 Feb '25

Hi, I am not able to correctly detect OS and use MIBs for Bridgetech probes... would you be willing to integrate them? I thought that sysDescr Bridgetech probe might be sufficient to identify this but I might be wrong as this particular virtual appliance is running on linux - they also have dedicated HW appliances. ___ _ _ / _ \ | |__ ___ ___ _ __ __ __(_) _ _ _ __ ___ | | | || '_ \ / __| / _ \| '__|\ \ / /| || | | || '_ ` _ \ | |_| || |_) |\__ \| __/| | \ V / | || |_| || | | | | | \___/ |_.__/ |___/ \___||_| \_/ |_| \__,_||_| |_| |_| Observium Professional 24.12.13796 https://www.observium.org ##### Starting discovery run at 2025-01-31 09:45:09 ##### ##### name [78] ##### +-------------+-----------------------+ | OID | | +-------------+-----------------------+ | sysDescr | Bridgetech probe | | sysObjectID | .1.3.6.1.4.1.24562.10 | +-------------+-----------------------+ o OS Type generic o OS Group unix o SNMP Version v1 o Last discovery 2025-01-31 09:38:00 o Last duration 2.69 seconds ##### Module Start: os ##### -- S pozdravem Ing. Pavel Vraštiak

2 1

Graph is not showing properly
by sagar＠nstplnet.com 26 Jan '25

26 Jan '25

Hi Team, Recently our observium server crashed we changed the HDD & installed as fresh config new versionbut today mrng onwards it will be not showing proper graph. Even webserver also runnning slow. Can u please help me on this. ---- Thanks & Regards Sagar Penti NOC HEAD +91 7977783978 sagar(a)nstplnet.com www.nstplnet.com NAVKAR SUPERTECH PVT LTD Unit No 201 Building No F6, Bhumi World Industrial Park, Pimplas, Bhiwandi, Thane-421302

2 1

How to upgrade Observium?
by Bar Russo 20 Jan '25

20 Jan '25

I can see now that Observium has newer version [cid:image001.png@01DB6A87.FD1C2150] . Is there any guide how to upgrade Observium? Best regards, Bar Russo | Information Technology Phone: 03-9546064 Address: Ariel Sharon 8 blvd. Or-Yehuda Linkedin<https://www.linkedin.com/company/77639321/admin/> | Facebook<https://www.facebook.com/mgroup.mgar> | Mgrp.co.il [תמונה שמכילה גופן, גרפיקה, לוגו, עיצוב גרפי התיאור נוצר באופן אוטומטי]<https://www.mgar.co.il/>

2 3

Observium Integration with MS Teams
by lalit.gupta＠gfl.co.in 20 Jan '25

20 Jan '25

Hi, I am trying to integrate Observium alerts with MS Teams. I am not able to receive alerts on MS Teams. The same is successful when I try to integrate an external webhook-test.com site and passing the parameters in Observium. Any suggestions would be helpful. Regards Lalit

1 0

Time rules for contacts
by noc＠green.ch 19 Jan '25

19 Jan '25

Hi all, We are encountering the following issue and would like to request a new feature to address it. Problem: We have several alert checkers, such as "interface down," configured with time-based conditions for office hours (08:00–18:00) and with "send recovery notification" option enabled. This results in a recovery message being sent at 18:00, even if the interface is still down. Proposed Solution: To resolve this issue, we suggest moving the time restrictions from the alert checker to the contact settings. Specifically, we propose adding the ability to configure time and weekday restrictions directly in the contact settings (e.g., for email contacts). These settings could mirror the time and weekday conditions currently available in alert checkers. For example: Time: between 08:00 and 18:00 Weekdays: 1, 2, 3, 4, 5 This feature would allow us to better manage notifications and avoid unnecessary recovery messages outside office hours. Thank you for considering this request, and we look forward to your response. Best regards, Raphael

1 0

Serial number SFP module switch ARUBA 6000+
by Arnoldo Vidal Bravo 13 Jan '25

13 Jan '25

hi. On our observium we can find SFP modules (searching by serial) installed on switch HP 2530 or Aruba 2530, but search on switch Aruba CX 6000+ not work. we can't find these information to know where is physically located. we appreciate helpus. -- Saluda cordialmente

2 1

webhook Teams 400 bad request
by staf.vangestel＠vitohoogstraten.be 13 Jan '25

13 Jan '25

"Hello, we started using Observium a while back (Observium CE 24.4.13528). I want to receive notifications within our Team in case of issues, so I created a webhook in Teams and added it in Observium under contacts. However, when I perform a test with `test_alert.php`, I get the error message '400 Bad Request' with the error 'Summary or Text is required'. I've read a lot about this issue, but I haven't been able to resolve it. I'm not very skilled at debugging, but I did test with Webhoo.site, and that works. Also, when I run `curl -H "Content-Type: application/json" -d '{"text": "Hello"}' https://xxxxxx`, the "Hello" message arrives in the Team. So why does it fail with `test_alert.php` (and also with the alerts)? Thank you in advance for any response." Staf Van Gestel Vito Hoogstraten --- Let me know if you need any further adjustments!

2 4

Ports of transit data resume
by Arnoldo Vidal Bravo 05 Jan '25

05 Jan '25

HELLO, I need to configure an alert for ports with transit description. To know which are transit ports I hope to use the network map. How can I export the data generated with the network map in a table? [image: image.png] The image shows a button to export data, but not in a table. -- Saluda cordialmente

2 1

Monitoring UPS
by Bar Russo 26 Dec '24

26 Dec '24

Hey there. I have UPS of Solar Edge and I succeed to monitor it via the Observium. The thing is, that beside if it's up or down I don't get any information about it. Such as Battery status, etc. Do I need to add some specific OID's or something? Thanks in advance. Best regards, Bar Russo | Information Technology Phone: 03-9546064 Address: Ariel Sharon 8 blvd. Or-Yehuda Linkedin<https://www.linkedin.com/company/77639321/admin/> | Facebook<https://www.facebook.com/mgroup.mgar> | Mgrp.co.il [תמונה שמכילה גופן, גרפיקה, לוגו, עיצוב גרפי התיאור נוצר באופן אוטומטי]<https://www.mgar.co.il/>

2 1

4 devices showing down after update to Observium
by Anthony Polselli 22 Dec '24

22 Dec '24

4 of my switches are showing: "Down (DNS)..." If I SSH into the server I can still ping the switches by DNS name. Thoughts? [cid:image001.png@01DB53CA.60F46450] __________________________________________ Anthony Polselli Chief Technology Officer Natural Networks, Inc. 7047 Carroll Rd. San Diego, CA 92121 anthony(a)naturalnetworks.com<mailto:anthony@naturalnetworks.com> http://www.naturalnetworks.com<http://www.naturalnetworks.com/> (619) 222-3232, ext: 101 office [cid:image002.png@01DB53CA.60F46450]

2 1

Building an Observium appliance
by Serge Caron 16 Dec '24

16 Dec '24

It's time I give something back to the community. This project, GitHub - SergeCaron/observium_appliance: Build and maintain an Observium appliance<https://github.com/SergeCaron/observium_appliance>, is aimed at SMB environments and walks the sysadmin through each phase of creating and maintaining (backup, restore, upgrade) an Observium appliance. It also covers the installation of Let's Encrypt certificates, secure (https) access to the Observium web site, basic email configuration for notifications, and log aggregation. It's basically a recipe with scripts. A small appliance with fault tolerant network configuration is shown to emphasize the standalone nature of the project. Of course, any virtual environment can do ;-) I hope I kept the typos and omissions to a minimum. Regards, Serge Caron

4 4

User access levels
by Tibor Marchyn 06 Dec '24

06 Dec '24

Hi, I have another beginner question please. I have setup Active Directory authentication, but how can I limit users to exact devices? I really do not want for some users to see anything else than they need to and all of them have level 1 access. And I can't see any option to limit them or assign user to device. Also it would be great to assign users to exact device group I have created. Thanks a lot Tibor

2 2

Alert Checker question
by Kalafus, Miroslav 04 Dec '24

04 Dec '24

Hi, Adam, is it possible to create an Alert Checker which will check number of trunks (see picture - trunk1,3,6 = 3) for trunk6 ? Something like: if it greater than 1, alert me? Trunk1,3,6 are discovered by Observium itself, I do not know how to check that type of item. Thanks in advance, Miro

2 2

limit time retention of device
by Raphael Pierazzi 04 Dec '24

04 Dec '24

Hello , I am using the Professional edition. I would like to limit the retention of graph information on a device to a maximum of 2 years. I often have to increase my disk capacity. thank you very much, Best Regard's Raphael

2 2

Observium isn't checking devices anymore.
by Bar Russo 03 Dec '24

03 Dec '24

Greetings, When I check the alerts I've created I can see that it's been 6 days since the last check was done, six days that the observium didn't check it. [cid:image001.png@01DB4580.CC60ADA0] For some reason it stopped checking my devices, I shut down a server and I don not receive an alert obviously. If I'm checking logs from /opt/observium/logs/observium.log I can see from the 27/11 [2024/11/27 09:45:46 +0200] poller.php(4002645): poller.php: 10.1.6.203 - 1 devices polled in 2.6017 secs [2024/11/27 09:45:46 +0200] poller.php(4002858): poller.php: 10.1.6.70 - 1 devices polled in 2.2512 secs Any ideas please? Best regards, Bar Russo | Information Technology Phone: 03-9546064 Address: Ariel Sharon 8 blvd. Or-Yehuda Linkedin<https://www.linkedin.com/company/77639321/admin/> | Facebook<https://www.facebook.com/mgroup.mgar> | Mgrp.co.il [תמונה שמכילה גופן, גרפיקה, לוגו, עיצוב גרפי התיאור נוצר באופן אוטומטי]<https://www.mgar.co.il/>

2 1

How to Download Professional Edition
by eddie.reyes＠lscu.coop 03 Dec '24

03 Dec '24

I have a valid subscription to the professional edition. I have decided to start from scratch and build a new Observium server, but cannot find where to download the Professional edition. Can someone help? Thanks.

2 1

Re: ... subscription has been disabled from email nikto.barrada@gmail.com
by Tobias Cederlund 27 Nov '24

27 Nov '24

I don't know why... But exactly the same for me. Last message I received on the mailing list was on feb 15. /Tobias

3 6

Ports switch are deleted after polling
by jan.croene＠police.belgium.eu 14 Nov '24

14 Nov '24

I have more than 100 alcatel switches configured in my observium. All of these can be discoverd/polled properly. However, I have 3 switches whose ports are deleted after the devices were added (I think after polling). When I run a discover again the ports show up in the GUI for a while, until the next polling. Other data such as vlans, temperature etc are always available. Other switches in the same environment does have normal behaviour. Of course the switch does operate normally all the time. Any ideas or suggestions? Thanks, Jan

3 2

OBSERVIUM STOP GRAPH
by SIMEON COMPANY CHILE SPA 11 Nov '24

11 Nov '24

Observium does not show the graphs. We are using Observium on a VPS server in the Cloud. We manage the devices via VPN. When you start adding several devices, more than 5 approximately, Observium shows the devices online, but does not show any information in the graphs of the interfaces. We have the professional subscription license. Thanks, José

2 1

Re: Ports showing it error.
by Bar Russo 10 Nov '24

10 Nov '24

? [cid:image001.png@01DB337E.0BE0A850] בר רוסו | מערכות מידע מייל: barr(a)mgrp.co.il<mailto:barr@mgrp.co.il> קבוצת Mgroup | אריאל שרון 8, אור יהודה www.mgrp.co.il<http://www.mgrp.co.il>

1 0

Ports showing it error.
by Bar Russo 07 Nov '24

07 Nov '24

Hey there. For some reason there are some ports in a few switch of mines that seems to be in error. [cid:image001.png@01DB3116.7130B2A0] The ports works fine, is it something I need to deal with or just don't mind it? Best regards, Bar Russo | Information Technology Phone: 03-9546064 Address: Ariel Sharon 8 blvd. Or-Yehuda Linkedin<https://www.linkedin.com/company/77639321/admin/> | Facebook<https://www.facebook.com/mgroup.mgar> | Mgrp.co.il [תמונה שמכילה גופן, גרפיקה, לוגו, עיצוב גרפי התיאור נוצר באופן אוטומטי]<https://www.mgar.co.il/>

1 0

alert box
by Arnoldo Vidal Bravo 05 Nov '24

05 Nov '24

Hi A few days ago we updated observium (from 23.2.12520 to 24.8.13606) and now we don't see the alerts for monitored ports. Before we saw yellow boxes (warnings), now they don't appear. Does it no longer show that information? port down we must add something in the config file? -- Saluda cordialmente

1 1

Air gapped device - status and monitoring
by Ivo van Tulden 28 Oct '24

28 Oct '24

Hello We have an air gapped device for back-up. This devices is active once a week for a couple of hours to get the latest back-up and then the device goes offline. The default behaviour is that the device is down and gives a 'error' for the rest of the week because it can't be reached. Is their a way to: * For a working window of the device? Meaning that outside the specified couple of hours the device will not show down/error? * Flip the device status when not in the working window? Meaning if the device goes online on a different time there is an alert? Met vriendelijke groet, Ivo van Tulden Industrial Automation [cid:image001.png@01DB2954.D83E8810] **** DISCLAIMER: The information sent in or attached to this e-mail is for the addressee only. If this e-mail message is unclear please contact VLISCO by e-mail or telephone. Disclosure or reproduction of this information to a third party without prior agreement of VLISCO is not allowed. VLISCO does not accept any responsibility for the correct and complete interpretation of this e-mail nor for the time of its arrival. VLISCO cannot be held responsible for any claim resulting from negotiations and/or decisions made directly or indirectly based on information contained in this e-mail message. Vlisco Netherlands B.V. Binnen Parallelweg 27, 5701 PH, Helmond, The Netherlands. Chamber of commerce Eindhoven 50751492. Tel.: +31 (0)492 570922 Fax: +31 (0)492 570230 Visit our website: www.vlisco.com ****

2 1

Observium - Halkbank Enterprise Plan Purchasing
by Recep Oguz AKKUS 25 Oct '24

25 Oct '24

Hello Dear Sir/Madam, We are one of the largest banks in Türkiye. With Observium, we want to monitor more than 4000 UPS and Printers in our branches. We are interested in purchasing a Enterprise plan. In accordance with the institution's procedures, we need to sign a contract for the purchase. We also request technical support for installation. Can we organise a meeting to get acquainted? Do you have a business partner in Turkey? Thanks in advance. Best Regards. [https://beraber.halkbank.com.tr/hbcdn/assets/image/mail/images/imza/logo.png]<https://www.halkbank.com.tr/> Information Technologies Operation Department [https://beraber.halkbank.com.tr/hbcdn/assets/image/mail/images/imza/konum.p…]<https://www.halkbank.com.tr/tr/iletisim.html> [https://beraber.halkbank.com.tr/hbcdn/assets/image/mail/images/imza/web.png] <https://www.halkbank.com.tr/> [https://beraber.halkbank.com.tr/hbcdn/assets/image/mail/images/imza/twitter…] <https://twitter.com/halkbank> [https://beraber.halkbank.com.tr/hbcdn/assets/image/mail/images/imza/faceboo…] <https://tr-tr.facebook.com/halkbank/> [https://beraber.halkbank.com.tr/hbcdn/assets/image/mail/images/imza/linkedi…] <https://www.linkedin.com/company/halkbank/> [https://beraber.halkbank.com.tr/hbcdn/assets/image/mail/images/imza/youtube…] <https://www.youtube.com/halkbank> [https://beraber.halkbank.com.tr/hbcdn/assets/image/mail/images/imza/instagr…] <https://www.instagram.com/halkbank/> Recep Oguz AKKUS / IT Technician [https://beraber.halkbank.com.tr/hbcdn/assets/image/mail/images/imza/mail.png] RecepOguz.AKKUS(a)halkbank.com.tr<mailto:RecepOguz.AKKUS@halkbank.com.tr> 📞 +90 216 503 47 62<sip:0216%20503%2047%2062> [https://beraber.halkbank.com.tr/hbcdn/assets/image/mail/images/imza/doga.png] I avoid wasting paper, I don't print unless necessary. *Bu e-posta ve ilişikteki dosyalar hukuken gizli ve kişisel veri/özel nitelikli kişisel veri içermektedir. Kişisel verilerle ilgili bilgilendirmeyi halkbank.com.tr adresinden okuyabilirsiniz. E-posta ve içeriği, sadece gönderilen gerçek veya tüzel kişinin gönderim amacıyla sınırlı kullanımı içindir. Muhatap, kendisine gönderilen bilgileri gönderim amacıyla sınırlı ve ölçülü olarak kullanacağını kabul eder. Eğer bu e-postanın muhatabı değilseniz bu e-postanın ve eklerinin kopyalarını herhangi bir şekilde kullanamaz, gönderemez, dağıtamaz ve yedekleyemezsiniz. Lütfen bu e-postayı yanlışlıkla aldıysanız, gönderene bu durumu bildiriniz ve e-posta ve ilişiğindeki belgeleri sistemden siliniz. Bu mesaj aksi sözleşme ile belirtilmedikçe herhangi bir işlem teklifi amacı taşımamaktadır. Türkiye Halk Bankası A.Ş.’nin hiçbir çalışanı veya temsilcisi, elektronik posta yolu ile Türkiye Halk Bankası A.Ş. adına bağlayıcı bir sözleşme yapmak için yetkilendirilmemiştir.* *This message contains confidential information and personal data/sensitive personal data. You can reach and read acknowledgement about data protection on halkbank.com.tr. It’s intended only limited use of the individual or legal entity to whom they are addressed only for sending purpose. Recipient acknowledges that he/she shall only use the information in accordance with its sending purpose. If you are not the named addressee, you should not use, disseminate, distribute or copy this e-mail and its attachment. Please notify the sender immediately by e-mail if you have received this email by mistake and delete this email and its attachment from your system. Unless otherwise specified by a mutual agreement, this message is not intended to be a request for a transaction. No employee or agent is authorized to conclude any binding agreement on behalf of Türkiye Halk Bankası A.Ş. with any third party by e-mail.*

1 0

VMware VMs keeps discovering more and more
by Ivo van Tulden 24 Oct '24

24 Oct '24

Dear community, This week I started with a new Observium installation, and love the product. A small problem is with my VMware 6.7 hosts (I know they are old) which keeps adding the same VM's to the list. How can I resolve this? Same VM a lot of times: [cid:image001.png@01DB1B14.94FE47F0] Met vriendelijke groet, Ivo van Tulden Industrial Automation **** DISCLAIMER: The information sent in or attached to this e-mail is for the addressee only. If this e-mail message is unclear please contact VLISCO by e-mail or telephone. Disclosure or reproduction of this information to a third party without prior agreement of VLISCO is not allowed. VLISCO does not accept any responsibility for the correct and complete interpretation of this e-mail nor for the time of its arrival. VLISCO cannot be held responsible for any claim resulting from negotiations and/or decisions made directly or indirectly based on information contained in this e-mail message. Vlisco Netherlands B.V. Binnen Parallelweg 27, 5701 PH, Helmond, The Netherlands. Chamber of commerce Eindhoven 50751492. Tel.: +31 (0)492 570922 Fax: +31 (0)492 570230 Visit our website: www.vlisco.com ****

3 5

Observium Professional Subscription
by Joseph Padueng 21 Oct '24

21 Oct '24

Hi Sir, If i want to Purchase Observium Professional Subscription, so what is the procedure? Regards, Joseph Padueng

1 0

Can't log into Observium
by dwalcott＠asgllc.com 21 Oct '24

21 Oct '24

Hey everyone, I had a functioning install of Observium 24.4.13528 (26th April 2024) running on Ubuntu 24.04.1 LTS, just using mysql for auth. I then tried to switch to AD by entering info in the "AD" section of the /settings web UI config page. Once I did that, I got the error below when trying to log in. I switched back to mysql login, by manually changing $config['auth_mechanism'] = "ad"; to $config['auth_mechanism'] = "mysql"; in config.php, and am able to log in again. Can anyone point me in the direction of what's wrong? array_keys(): Argument #1 ($array) must be of type array, null given in /opt/observium/html/includes/authentication/ad.inc.php:38 #0: (unknown function) called at [/opt/observium/html/includes/authentication/ad.inc.php:38] 33: } 34: } 35: 36: // If no access control groups are specified, use the defined level groups as access control 37: if (!is_array($config['auth_ad_group'])) { 38: $config['auth_ad_group'] = array_keys($config['auth_ad_groups']); 39: } 40: 41: // Synthesize Base DN from configured domain name, if it is not set 42: if (!isset($config['auth_ad_basedn'])) { 43: if (isset($config['auth_ad_domain'])) { #1: array_keys called at [/opt/observium/html/includes/authentication/ad.inc.php:38] 33: } 34: } 35: 36: // If no access control groups are specified, use the defined level groups as access control 37: if (!is_array($config['auth_ad_group'])) { 38: $config['auth_ad_group'] = array_keys($config['auth_ad_groups']); 39: } 40: 41: // Synthesize Base DN from configured domain name, if it is not set 42: if (!isset($config['auth_ad_basedn'])) { 43: if (isset($config['auth_ad_domain'])) { #2: include_once called at [/opt/observium/html/includes/authenticate.inc.php:126] 121: // Always load mysql as backup 122: include_once($config['html_dir'] . '/includes/authentication/mysql.inc.php'); 123: 124: // Load primary module if not mysql 125: if ($config['auth_mechanism'] !== 'mysql') { 126: include_once($auth_file); 127: } 128: 129: // Include base auth functions calls 130: include_once($config['html_dir'] . '/includes/authenticate-functions.inc.php'); 131: } else { #3: include called at [/opt/observium/html/index.php:72] 67: $_SERVER['PATH_INFO'] = $_SERVER['PATH_INFO'] ?? ($_SERVER['ORIG_PATH_INFO'] ?? ''); 68: 69: // Clean global $vars variable, it populated only after correct authenticating 70: unset($vars); 71: 72: include($config['html_dir'] . "/includes/authenticate.inc.php"); 73: 74: // Default theme set in global or user setting 75: if ($config['web_theme_default'] === 'system' && isset($_COOKIE['screen_scheme'])) { 76: $theme = $_COOKIE['screen_scheme']; 77: } else {

2 1

Buy subscription via invoice / bank transfer ?
by anders.jonsson＠norconsult.com 21 Oct '24

21 Oct '24

Hello, Thanks for your excellent software. We are very interested in buying a Professional Subscription subscription (to begin with) but we don't have company issued cards and not allowed to used paypal either. Is there any possibility to do a invoice / bank transfer instead ?

3 2

Custome Dashboard
by Bar Russo 15 Oct '24

15 Oct '24

Hello there. I want to know if there's an option to make a custome dashboard in the Observium that will show me CPU, Memory, Storage usage in percents like it shows me when I press on 'Health' and choose one of them. So instead of pressing on 'Health' and choose 'Processors' or 'Memory' or 'Storage' it'll show me in a dashboard of them in one dashboard. If it's possible I'll be more than glad to get help how to do it. Best regards, Bar Russo | Information Technology Phone: 03-9546064 Address: Ariel Sharon 8 blvd. Or-Yehuda Linkedin<https://www.linkedin.com/company/77639321/admin/> | Facebook<https://www.facebook.com/mgroup.mgar> | Mgrp.co.il [תמונה שמכילה גופן, גרפיקה, לוגו, עיצוב גרפי התיאור נוצר באופן אוטומטי]<https://www.mgar.co.il/>

1 0

Question about evaluation licenses
by Jonathan Sélea 14 Oct '24

14 Oct '24

Hi! I am wondering if Observium offers evaluation licensenses? I am looking into intergrating Observium with Zabbix, and noticed that Observium has a RESTful API included in the Professional License. I am however, unable to purchase a license in the current organization that I am in due to bureaucracy, and would love to have a evaluation license to we could test it for a month. Would that be possible? Thanks :) -- Jonathan Sélea

1 0

Ubuntu 24.04, rsyslogd 8.2312.0 Syslog integration
by prkjnr＠hotmail.com 11 Oct '24

11 Oct '24

Hi all, I have recently built to introduce Observium into my business. I can see Syslog entries running "tail -f /var/log/syslog" as soon as i enter config into /etc/rsyslog.d/30-observium.conf like from https://docs.observium.org/syslog/ and follow the 8.X instructions i get from an auto install version 2024-10-10T13:49:02.462169+01:00 Observium rsyslogd: action 'action-8-omprog' resumed (module 'omprog') [v8.2312.0 try https://www.rsyslog.com/e/2359 ] 2024-10-10T13:49:02.469290+01:00 Observium rsyslogd: omprog: failed to execute program '/opt/observium/syslog.php': Permission denied 2024-10-10T13:49:02.470590+01:00 Observium rsyslogd: child process (pid 565567) exited with status 1 [v8.2312.0] 2024-10-10T13:49:02.470763+01:00 Observium rsyslogd: omprog: program '/opt/observium/syslog.php' (pid 565567) terminated; will be restarted [v8.2312.0 try https://www.rsyslog.com/e/2119 ] 2024-10-10T13:49:02.470894+01:00 Observium rsyslogd: action 'action-8-omprog' suspended (module 'omprog'), retry 0. There should be messages before this one giving the reason for suspension. [v8.2312.0 try https://www.rsyslog.com/e/2007 ] 2024-10-10T13:49:03.476197+01:00 Observium rsyslogd: action 'action-8-omprog' resumed (module 'omprog') [v8.2312.0 try https://www.rsyslog.com/e/2359 ] 2024-10-10T13:49:03.485802+01:00 Observium rsyslogd: omprog: failed to execute program '/opt/observium/syslog.php': Permission denied 2024-10-10T13:49:03.486960+01:00 Observium rsyslogd: child process (pid 565568) exited with status 1 [v8.2312.0] 2024-10-10T13:49:03.487106+01:00 Observium rsyslogd: omprog: program '/opt/observium/syslog.php' (pid 565568) terminated; will be restarted [v8.2312.0 try https://www.rsyslog.com/e/2119 ] 2024-10-10T13:49:03.487173+01:00 Observium rsyslogd: action 'action-8-omprog' suspended (module 'omprog'), retry 0. There should be messages before this one giving the reason for suspension. [v8.2312.0 try https://www.rsyslog.com/e/2007 ] 2024-10-10T13:49:04.495956+01:00 Observium rsyslogd: action 'action-8-omprog' resumed (module 'omprog') [v8.2312.0 try https://www.rsyslog.com/e/2359 ] 2024-10-10T13:49:04.503258+01:00 Observium rsyslogd: omprog: failed to execute program '/opt/observium/syslog.php': Permission denied 2024-10-10T13:49:04.503510+01:00 Observium rsyslogd: omprog: program '/opt/observium/syslog.php' (pid 565569) terminated; will be restarted [v8.2312.0 try https://www.rsyslog.com/e/2119 ] 2024-10-10T13:49:04.503658+01:00 Observium rsyslogd: child process (pid 565569) exited with status 1 [v8.2312.0] 2024-10-10T13:49:04.513839+01:00 Observium rsyslogd: action 'action-8-omprog' suspended (module 'omprog'), retry 0. There should be messages before this one giving the reason for suspension. [v8.2312.0 try https://www.rsyslog.com/e/2007 ] 2024-10-10T13:49:05.519132+01:00 Observium rsyslogd: action 'action-8-omprog' resumed (module 'omprog') [v8.2312.0 try https://www.rsyslog.com/e/2359 ] 2024-10-10T13:49:05.526462+01:00 Observium rsyslogd: omprog: failed to execute program '/opt/observium/syslog.php': Permission denied 2024-10-10T13:49:05.527605+01:00 Observium rsyslogd: child process (pid 565571) exited with status 1 [v8.2312.0] 2024-10-10T13:49:05.527715+01:00 Observium rsyslogd: omprog: program '/opt/observium/syslog.php' (pid 565571) terminated; will be restarted [v8.2312.0 try https://www.rsyslog.com/e/2119 ] 2024-10-10T13:49:05.527812+01:00 Observium rsyslogd: action 'action-8-omprog' suspended (module 'omprog'), retry 0. There should be messages before this one giving the reason for suspension. [v8.2312.0 try https://www.rsyslog.com/e/2007 ] 2024-10-10T13:49:06.533091+01:00 Observium rsyslogd: action 'action-8-omprog' resumed (module 'omprog') [v8.2312.0 try https://www.rsyslog.com/e/2359 ] from a manual install 2024-10-10T12:48:21.195520+00:00 observium2 rsyslogd: action 'action-2-omprog' resumed (module 'omprog') [v8.2312.0 try https://www.rsyslog.com/e/2359 ] 2024-10-10T12:48:21.203242+00:00 observium2 rsyslogd: omprog: failed to execute program '/opt/observium/syslog.php': Permission denied 2024-10-10T12:48:21.203529+00:00 observium2 kernel: audit: type=1400 audit(1728564501.202:847): apparmor="DENIED" operation="exec" class="file" profile="rsyslogd" name="/opt/observium/syslog.php" pid=3214 comm=72733A6D61696E20513A526567 requested_mask="x" denied_mask="x" fsuid=103 ouid=1000 2024-10-10T12:48:21.203871+00:00 observium2 rsyslogd: child process (pid 3214) exited with status 1 [v8.2312.0] 2024-10-10T12:48:21.208108+00:00 observium2 rsyslogd: omprog: program '/opt/observium/syslog.php' (pid 3214) terminated; will be restarted [v8.2312.0 try https://www.rsyslog.com/e/2119 ] 2024-10-10T12:48:21.208234+00:00 observium2 rsyslogd: action 'action-2-omprog' suspended (module 'omprog'), retry 0. There should be messages before this one giving the reason for suspension. [v8.2312.0 try https://www.rsyslog.com/e/2007 ] 2024-10-10T12:48:22.213298+00:00 observium2 rsyslogd: action 'action-2-omprog' resumed (module 'omprog') [v8.2312.0 try https://www.rsyslog.com/e/2359 ] 2024-10-10T12:48:22.220546+00:00 observium2 kernel: audit: type=1400 audit(1728564502.219:848): apparmor="DENIED" operation="exec" class="file" profile="rsyslogd" name="/opt/observium/syslog.php" pid=3215 comm=72733A6D61696E20513A526567 requested_mask="x" denied_mask="x" fsuid=103 ouid=1000 2024-10-10T12:48:22.220765+00:00 observium2 rsyslogd: omprog: failed to execute program '/opt/observium/syslog.php': Permission denied 2024-10-10T12:48:22.221161+00:00 observium2 rsyslogd: child process (pid 3215) exited with status 1 [v8.2312.0] 2024-10-10T12:48:22.275077+00:00 observium2 rsyslogd: omprog: program '/opt/observium/syslog.php' (pid 3215) terminated; will be restarted [v8.2312.0 try https://www.rsyslog.com/e/2119 ] 2024-10-10T12:48:22.275233+00:00 observium2 rsyslogd: action 'action-2-omprog' suspended (module 'omprog'), retry 0. There should be messages before this one giving the reason for suspension. [v8.2312.0 try https://www.rsyslog.com/e/2007 ] 2024-10-10T12:48:23.279060+00:00 observium2 rsyslogd: action 'action-2-omprog' resumed (module 'omprog') [v8.2312.0 try https://www.rsyslog.com/e/2359 ] 2024-10-10T12:48:23.287555+00:00 observium2 rsyslogd: omprog: failed to execute program '/opt/observium/syslog.php': Permission denied 2024-10-10T12:48:23.287798+00:00 observium2 kernel: audit: type=1400 audit(1728564503.286:849): apparmor="DENIED" operation="exec" class="file" profile="rsyslogd" name="/opt/observium/syslog.php" pid=3217 comm=72733A6D61696E20513A526567 requested_mask="x" denied_mask="x" fsuid=103 ouid=1000 2024-10-10T12:48:23.288399+00:00 observium2 rsyslogd: child process (pid 3217) exited with status 1 [v8.2312.0] 2024-10-10T12:48:23.292012+00:00 observium2 rsyslogd: omprog: program '/opt/observium/syslog.php' (pid 3217) terminated; will be restarted [v8.2312.0 try https://www.rsyslog.com/e/2119 ] 2024-10-10T12:48:23.292140+00:00 observium2 rsyslogd: action 'action-2-omprog' suspended (module 'omprog'), retry 0. There should be messages before this one giving the reason for suspension. [v8.2312.0 try https://www.rsyslog.com/e/2007 ] 2024-10-10T12:48:24.296075+00:00 observium2 rsyslogd: action 'action-2-omprog' resumed (module 'omprog') [v8.2312.0 try https://www.rsyslog.com/e/2359 ] 2024-10-10T12:48:24.304221+00:00 observium2 rsyslogd: omprog: failed to execute program '/opt/observium/syslog.php': Permission denied 2024-10-10T12:48:24.304648+00:00 observium2 kernel: audit: type=1400 audit(1728564504.302:850): apparmor="DENIED" operation="exec" class="file" profile="rsyslogd" name="/opt/observium/syslog.php" pid=3218 comm=72733A6D61696E20513A526567 requested_mask="x" denied_mask="x" fsuid=103 ouid=1000 2024-10-10T12:48:24.305192+00:00 observium2 rsyslogd: child process (pid 3218) exited with status 1 [v8.2312.0] i have checked permisions -rwxrwxr-x 1 user user 3376 Feb 22 2024 syslog.php any assistance would be gratefully received

2 5

syslog entries
by Arnoldo Vidal Bravo 08 Oct '24

08 Oct '24

Hi, Every 5 minutes we are notified about the same messages sent by a device (repetitive messages). Is there a way to be notified only once a day? Or every 12 hours? example: [image: image.png] -- Saluda cordialmente

2 1

traps
by Arnoldo Vidal Bravo 08 Oct '24

08 Oct '24

Observium do not support traps? -- Saluda cordialmente

2 1

Enterprise Discord Channel - Can I get added?
by Chris Cottingham 03 Oct '24

03 Oct '24

Is there an Enterprise discord support channel for Observium? If so, can I get added to it? Enterprise license number: Bmaschke-26972681 Thanks! Chris Cottingham Systems + R&D | Apple Music 512-412-1082 ccottingham(a)apple.com

3 3

widgets
by jose.napoli＠neuralsoft.com 03 Oct '24

03 Oct '24

Can ! change the config of any widget or generate new? When clic in config show this: > $widget['widget_config']ajax/actions/edit_widget.inc.php:146 array()

3 9

footer is not showed on alert's email
by Arnoldo Vidal Bravo 02 Oct '24

02 Oct '24

Hi, Yesterday we upgrade the observium version (from 23.2.12520 to 24.8.13606), but we don't see the time when alert was generated. Would be good show (on email alert) the alert checker's name. i attach screenshots. observium 24.8.13606 [image: image.png] observium 23.2.12520 [image: image.png] Because the alert can be generated at time distinct of mail -- Saluda cordialmente

2 1

Can't see alerts.
by Bar Russo 30 Sep '24

30 Sep '24

Greetings. For some reason recently I can NOT see any alert status, if I press on 'Alerts' it is empty and doesn't show anything. Sometimes it's showing the alert for a second and then all of the alerts disappeared. I tried to reboot the Ubuntu VM and also tried to see some logs but couldn't handle it, still having this issue. I didn't change anything within the Ubuntu machine the Observium installed on so ain't got a clue what's happened. Maybe you'll be able to assist me please. Best regards, Bar Russo | Information Technology Phone: 03-9546064 Address: Ariel Sharon 8 blvd. Or-Yehuda Linkedin<https://www.linkedin.com/company/77639321/admin/> | Facebook<https://www.facebook.com/mgroup.mgar> | Mgrp.co.il [תמונה שמכילה גופן, גרפיקה, לוגו, עיצוב גרפי התיאור נוצר באופן אוטומטי]<https://www.mgar.co.il/>

1 0

Purchase multiple instances in one CC transaction
by ccollar＠voltagepark.com 20 Sep '24

20 Sep '24

Greetings, I'd like to purchase multiple instances (multiple systems, multiple DBs) of Observium Pro with one credit card transaction, and am wondering if this is possible, and if so how? Thanks!

2 1

Setting up alerts on received power
by Laurent CARON 19 Sep '24

19 Sep '24

Hi, I'd like to setup alerts on RX power levels of my optical interfaces (on juniper and cisco equipment). In the web interface, this value can be obtained @URL: /device/device=yy/tab=health/metric=dbm/id=xx/ I really can't figure how to properly build an alert checker on this. Did anyone already set it up ? Thanks

1 0

Sensor limit nominal and delta OIDs need different scaling
by Corwin Ziegler Hunts 18 Sep '24

18 Sep '24

Hi, We are trying to set appropriate limits for a frequency sensor. There are OIDs for the nominal frequency and the acceptable deviation from it. The problem is the nominal OID needs 0.1 scaling while the deviation OID needs 1 scaling (the measured value needs 0.1 scaling). Is there a way to handle this? We tried using 'limit_scale' but that applies the same scaling to both the nominal and delta limits. The specific device is a CyberPower ATS PDU. The OIDs are ePDU2SourceStatusSourceAFrequency, ePDU2SourceStatusSourceBFrequency, ePDU2SourceStatusNominalFrequency and ePDU2SourceConfigFrequencyDeviation. Corwin

1 0

API Error 500
by Nicolas Korten 18 Sep '24

18 Sep '24

Hello dear Observium Team, I'm trying to add a device using the API and get an error 500 message instead of the expected notice that the device is not respondig to snmp. > curl -u korten:secret https://observium.domain.net/api/v0/devices/ -X POST -d '{"hostname":"pe-lab02.domain.net", "snmp_community":"test", "ping_skip":"on"}' <h1>500 Internal Server Error</h1><h3>flight\Engine::_json(): Argument #2 ($code) must be of type int, string given, called in /opt/observium/libs/flight3/core/Dispatcher.php on line 86 (0)</h3><pre>#0 /opt/observium/libs/flight3/core/Dispatcher.php(86): flight\Engine->_json() #1 /opt/observium/libs/flight3/core/Dispatcher.php(50): flight\core\Dispatcher->runEvent() #2 /opt/observium/libs/flight3/Engine.php(113): flight\core\Dispatcher->run() #3 [internal function]: flight\Engine->__call() #4 /opt/observium/libs/flight3/core/Dispatcher.php(287): call_user_func_array() #5 /opt/observium/libs/flight3/Flight.php(143): flight\core\Dispatcher::invokeMethod() #6 /opt/observium/html/api/v0/includes/devices.inc.php(133): Flight::__callStatic() #7 [internal function]: api_add_device() #8 /opt/observium/libs/flight3/core/Dispatcher.php(250): call_user_func_array() #9 /opt/observium/libs/flight3/core/Dispatcher.php(237): flight\core\Dispatcher::callFunction() #10 /opt/observium/libs/flight3/Engine.php(508): flight\core\Dispatcher::execute() #11 /opt/observium/libs/flight3/core/Dispatcher.php(86): flight\Engine->_start() #12 /opt/observium/libs/flight3/core/Dispatcher.php(50): flight\core\Dispatcher->runEvent() #13 /opt/observium/libs/flight3/Engine.php(113): flight\core\Dispatcher->run() #14 [internal function]: flight\Engine->__call() #15 /opt/observium/libs/flight3/core/Dispatcher.php(287): call_user_func_array() #16 /opt/observium/libs/flight3/Flight.php(143): flight\core\Dispatcher::invokeMethod() #17 /opt/observium/html/api/v0/index.php(66): Flight::__callStatic() #18 {main}</pre> As far as I can see, the error is in: api/v0/includes/devices.inc.php at line 133: >Flight::json($json, '400'); should be: Flight::json($json, 400); Agree? Thank you and have a nice day, Nico -- Nicolas Korten Dipl.-Ing. Systemtechnik und Dienste/EDV komro GmbH Am Innreit 2 DE-83022 Rosenheim Telefon: +49 8031 365 7913 Telefax: +49 8031 365 7699 Mail: korten(a)komro.net / http://www.komro.net __________________________________________________________________________________________________________ Geschäftsführer: Dipl. Ing. Gert Vorwalder Vorsitz im Aufsichtsrat: Oberbürgermeister Andreas März Sitz der Gesellschaft: Rosenheim Registergericht: Traunstein, HRB-Nr. 10689 USt.-IdNr.: DE 188814299 Hinweise zur Verarbeitung Ihrer personenbezogenen Daten gem Art. 13 DSGVO: Verantwortlich für die Verarbeitung Ihrer personenbezogenen Daten im Rahmen des vorliegenden Kontakts ist die komro GmbH Weitere Informationen zur Verarbeitung Ihrer Daten, insbesondere zu den Ihnen zustehenden Rechten, können Sie unserer Homepage unter https://www.komro.net/datenschutz entnehmen oder auf jedem anderen Wege unter den o.g. Kontaktdaten bei uns erfragen.

4 7

Group section not working in Status Summary widget
by Ricardo Puig 16 Sep '24

16 Sep '24

Dear Observium Team, The group section in Status Summary widget is pointing to nowhere (javascript:void(0)) Regards.

1 0

NAT Counters Cisco
by Arnoldo Vidal Bravo 12 Sep '24

12 Sep '24

Hi. How can I get a NAT's sessions total from Cisco ASR-1002X? We get SNMP results by snmp v2 and Observium version is 23.8.12.912. I must enable NAT MIB, but ¿where is an example? NAT MIB can be enable after add the device? -- Saluda cordialmente

2 1

Hello.
by Bar Russo 12 Sep '24

12 Sep '24

I want to subscribe because I need some help with the metrics of the Observium. [cid:image001.png@01DB04FB.F42B1C50] בר רוסו | מערכות מידע מייל: barr(a)mgrp.co.il<mailto:barr@mgrp.co.il> קבוצת Mgroup | אריאל שרון 8, אור יהודה www.mgrp.co.il<http://www.mgrp.co.il>

2 2

Alert Checker association "Storage Description" major problem
by kalafus＠energotel.sk 10 Sep '24

10 Sep '24

Hello, Creating storage alert checker using entity association "Storage Description" renders page https://observium.xxx.sk/alert_checks/ totally unavailable (just blank whole page). Deleting that alert makes it work again. Looking for a solution...

3 4

Unix agent not working on non-default port
by ricardo＠banak.com 10 Sep '24

10 Sep '24

We have several devices behind a NAT that require using an agent_port other than 36602. Even though I have changed the port in the GUI, the poller seems to continue using the standard port. It seems to me that $device['attribs']['agent_port'] has not been populated. Running 24.9.13634 Pro on debian 12. Thank you. Ricardo Puig

2 2

The graphs for few network devices not getting displayed
by Renuka Arya 09 Sep '24

09 Sep '24

Hi Team! We are running Observium pro version Observium 24.6.13582(stable). Lookslike the memory,processor and network graphs are seeing a draw error. You can still the values beside but it wont draw the graphs. It says "Draw error"/nan I looked into the permissions for the rrd folders for these devices and did change a non-working one similar to a working one as root:observium but that did not fix the issue. I also tried deleting (which was not ideal) a device and adding it back but that did not work as well. Please guide! Thanks! Regards Renuka Arya

3 4

Incorrect sensor limits caused by duplicate unit conversion
by Corwin Ziegler Hunts 04 Sep '24

04 Sep '24

The definition for the temperature sensor on a CyberPower PDU (or UPS) environmental sensor accessory defines both "unit" and "limit_unit" as "F". This seems to cause the limit values to get converted (to Celsius) twice: first in "entity_limits_definition" using "limit_unit" and then in "discover_sensor_ng" using "sensor_unit" which is set from "unit". For us, the SNMP read limits of 59 and 90 F end up as -9.44 and 0.12 C on the sensor in Observium. This is on version r13629. Simply not setting "limit_unit" is a workaround if both the sensor and limit values use the same unit (maybe that is preferred when defining sensors?). If the units are different a proper fix is needed. Also, is this the preferred method for reporting this kind of issue? Corwin

2 3

How to add a device which only responds to ping/icmp?
by Thomas Stather 23 Aug '24

23 Aug '24

Hi How can i add a device which cannot (!) speak any snmp and only responds to ping/icmp requests? We have an Aruba wlan setup (Mobility Master and two Mobility Controllers) and i want to add the aps to Observium, so that they are monitored but only by ping/icmp. (The MM and the two MCs are already added to Observium, but i cannot see if one AP went offline or came back online again) The aps cannot speak any snmp when managed by the MM or MC, thats why it fails when i try to add one via ./add_device.php I appreciate any help :) Best, Thomas -- Thomas Stather IT Services VCP4, VCP6-DCV, VCP6.5-DCV Tel: +49 6221 486 628 Fax: +49 6221 486 561 Bevor Sie diese Mail ausdrucken, prüfen Sie bitte ob dies wirklich nötig ist. Umweltschutz geht uns alle an!

10 15

Observium doesn't show interfaces within VPRN on Nokia routers
by Tao Zhang 21 Aug '24

21 Aug '24

Hi Observium team, We are using Observium as a main tool to monitor our router interfaces and collect SNMP stats. We recently replaced our Juniper routers with Nokia SR 7750. We noticed that Observium doesn't work very well with Nokia routers. Observium can only show the interfaces in the master instance, not the interfaces within VPRN or VPLS instances (Nokia call those interfaces SAPs). To be able to see interfaces within VPLS or VPRN, we need to enable two other MIBs, TIMETRA-SAP-MIB and TIMETRA-VRTR-MIB. We are not sure how to enable those two MIBs. Do we need to add them manually? This is the MIBs enabled on the Nokia router (default). [cid:ece89bfc-3ae2-4dcd-9c7c-641c3978f803] Any suggestion is greatly appreciated. Thanks, Tao

1 1

Re: How to add a device which only responds to ping/icmp?
by Croene Jan (PZ Antwerpen) 21 Aug '24

21 Aug '24

Dear, We bought the license to monitor devices via ping-check (with the probe functionality). "Observium is designed to collect and display data from SNMP-capable devices, but not every device supports SNMP. In order to monitor non-SNMP capable devices, the probes system can be used to perform checks on non-SNMP devices". I am just wondering how we can add a device in observium that cannot handle snmp? ________________________________ Als u niet de beoogde ontvanger van deze email bent, lees onze disclaimer<https://www.politie.be/nl/maildisclaimer>. Si vous n'?tes pas le destinataire pr?vu de cet email, lisez notre disclaimer<https://www.politie.be/fr/maildisclaimer>. Wenn Sie nicht der beabsichtigte Empf?nger dieser email sind, lesen Sie unseren disclaimer<https://www.politie.be/de/maildisclaimer>. If you aren't the intended recipient of this email, read our disclaimer<https://www.politie.be/en/maildisclaimer>.

2 1

Observium stops displaying stats for all monitored hosts for a period of time
by Kevin Riahi 21 Aug '24

21 Aug '24

Hello Team, It seems Observium stops displaying stats for all (most) monitored hosts for a period of time and then back to normal.!!! I've attached a few screenshots. Has this behavior been documented in the past? If not what is the best way to debug this. Observium ver 24.8.13606 Running on a dedicated server. 12 Core Xeon Proc 64 GB RAM Raided SSD drives. Thank you Kevin Riahi

3 3

Running on a subdomain
by d.wiersma＠dw-its.nl 20 Aug '24

20 Aug '24

Hi, I want to run overservium on a subdomain. My main domain is https://dw-its.nl Is it possible to run in under observium.dw-its.nl?

2 1

Bandwidth alerts based on value in "Device Port Parsed Speed"
by Brad Bendy 14 Aug '24

14 Aug '24

Hi, Checked around and can't figure out a way to do this and don't see anything in mailing list about it. Is there a way to build alerts based on the bandwidth value we are setting this way? For example we have a description of "[600Mbit]" and then want to alert on 80% of this value for example. I don't see a way to do this as the test conditions are all the parameters from SNMP. Obviously can make up a checker and do the math manually and what not but would not auto adjust and I need 100+ of these created. Would anyone else find this helpful? Thanks

1 0

Missing some nice stats from Cisco 9800 that I got from Cisco 5520
by andri＠harpa.is 12 Aug '24

12 Aug '24

Hi Our organization recently upgraded from Cisco 5520 WLC to Cisco 9800 WLC. In observium I get really good statistics about wireless client count and wireless ap count on the 5520 but not on the 9800. I am not sure if this is something on observium side or cisco side. But I wanted to ask if anyone has the same issue and if they found a solution. Or maybe this is just something that needs to be added. Please let me know if there is any further information I can submit. Best regards Andri

4 6

aerohive devices
by antero.vasconcelos＠truenet.pt 09 Aug '24

09 Aug '24

Hi team is there a way to view the wlans on aerohive AP and connected clients? what mib shoud be enabled? Anterov

2 1

Bug report: Broken scaling on some SFP receive power graphs
by Corwin Ziegler Hunts 09 Aug '24

09 Aug '24

Hi Observium team, We're having issues with some of the generated graphs. Some of our devices report the light level received by SFPs using mW (rather than dBm). We are on the latest stable revision (13582). Issue 1: The graphs generated by Observium for these sensors usually show an excessive scale of at least -100 mW to 100 mW when the data in the specified time interval are entirely within the range 100 nW to 1 mW and usually only a small chunk of that. The calculated minimum and maximum values shown below the graph are correct. These graphs worked properly in the past with a prior version of Observium. Issue 2: Selecting and deselecting the Force Autoscale option appears to have no effect on the generated graph or displayed rrd graph command. Manually running the generated rrd graph command after removing the "--alt-autoscale" option results in a good graph. Here is the raw SNMP output for one of the these sensors showing a current value of 0.5560mW: ENTITY-SENSOR-MIB::entPhySensorType.1000004631 = INTEGER: watts(6) ENTITY-SENSOR-MIB::entPhySensorScale.1000004631 = INTEGER: milli(8) ENTITY-SENSOR-MIB::entPhySensorPrecision.1000004631 = INTEGER: 4 ENTITY-SENSOR-MIB::entPhySensorValue.1000004631 = INTEGER: 5560 ENTITY-SENSOR-MIB::entPhySensorOperStatus.1000004631 = INTEGER: ok(1) Corwin

5 12

Switch overview: configurable interface sorting?
by Wiethoff, Helge 06 Aug '24

06 Aug '24

Hello everyone, The port sorting in the device overview has been changed at some point. Previously, it was sorted alphanumerically, but now the numbers are prioritized. Before, the order was A1, A2, A3..., B1, B2, B3, etc. And now it is A1, B1, A2, B2..., A3, B3, etc. Is there a way to change the sorting back to the old method using a configuration switch? Thank you and best regards Helge

2 1

Percent CPU
by Arnoldo Vidal Bravo 05 Aug '24

05 Aug '24

Hi, cuestion. we have about 600+ devices (switchs, wireless, router), we want know CPU usage on each one . On many devices we see 93% CPU usage. but login into device we can see only 1 measure and shows less than 7% on slot 0.0. While on observium we have 3 measures: processor, processor 1 and slot 0.0. please helpus to get the right measure. example [image: image.png] [image: image.png] [image: image.png] on centos 7 from CLI [image: image.png] -- Saluda cordialmente

1 0

Missing rebuild buttons for groups and alert checkers
by Corwin Ziegler Hunts 05 Aug '24

05 Aug '24

Hi, We use Observium groups extensively, often nested several times. Our alert checkers then reference these groups. After making changes to a group, including by adding a device, we used to force rebuilds of the groups (possibly several times) and checkers so the changes would propagate all the way through. We are on the latest stable revision (r13582) and the rebuild buttons are no longer available in the UI (possibly removed in r13391). What should we do now when we need to forcibly propagate changes? Corwin

2 2

Oxidized Integration?
by Wiethoff, Helge 05 Aug '24

05 Aug '24

Hi, I am currently testing a replacement for rancid. Rancid has worked for a long time, but adding new device classes feels more and more unwieldy. Oxidized [1] makes a good first impression and I was able to add new device classes without big problems. Then of course I would also like to see an integration with my favorite network management tool :-) There are people who have already worked on this: https://github.com/colin-stubbs/observium-oxidized It looks like this patch doesn't quite work for current observium versions, so I'd like to ask if anyone is working on it and what are the chances that there could be an Observium integration (professional edition)? Thanks Helge [1] https://github.com/ytti/oxidized

3 4

Polling - Real time port graphs are different on devices that run Linux natively
by ruben.aninoiu＠zananet.com 01 Aug '24

01 Aug '24

Hi Guys, I have noticed that the real-time graphs for devices that run Linux natively (JunosOS, UnifiOS, etc) display the traffic with "intervals in between". The non-native Linux devices (FortiOS, Cisco IOS) provide a nicer real-time graph for port traffic when polled. Is there something that could be adjusted so that the native Linux devices show the nicer graph? Best regards, Ruben

2 1

Status of OBS-4873
by Williams Sr., Mark Charles (Fed) 31 Jul '24

31 Jul '24

Hello Adam, Following up on the status of OBS-4873 (Oops during discovery of Dell N4000 Series Switches). Or Was this the correct place to send Maintenance issues? Mark C Williams Sr. Scientific Systems | Research Services Office Office of Information Systems Management National Institute of Standards and Technology (NIST) US Dept of Commerce

1 0

Abend on alert checker
by Joey Stanford 25 Jul '24

25 Jul '24

2 3

F5 Device not discovered
by dariusz.nowak＠contemi.com 24 Jul '24

24 Jul '24

Hi All, First email - welcome! I believe got small problem with discovering my F5 device , see below screenshot: https://postimg.cc/D4vm9mm8 Please correct me If I'm wrong but these F5 MiBs should not fail yeah? Now device is discovered with OS: F5 BIG-IP 16.1.0 Build 0.28.19 Engineering Hotfix (afm apm asm avr ltm) And I have basic stats like Network interfaces but nothing related to virtual servers that I believe is in other MIBs. Can somebody point me in right direction where to start troubleshoot this? Thanks Dariusz

2 2

Many devices shown as down(dns)
by Marios.P＠crowe.com.cy 19 Jul '24

19 Jul '24

Hello all, I can see in my observium installation that many devices changed their status to down(dns). This is a new installation and we migrated the configuration yesterday on a new server and devices were working properly. At around the same time (14:20:00) a lot of our machines changed their status to down. The message in the Event log is "Device status changed to Down (dns)". I tried to find what the problem may be but I can see SNMP are correct and dns records exist for the systems. Any ideas? Thank you, Marios

6 7

BGP alert
by Arnoldo Vidal Bravo 25 Jun '24

25 Jun '24

hi, in the observium's web keeps [image: image.png] This alert box appears from sunday (expected, we change of isp) but now is wednesday and show 0s. not 2d or real time since down we can disable this alert? without disable all bgp sessions -- Saluda cordialmente

2 1

Apache / https hung after updating Observing
by Roger Larsen 24 Jun '24

24 Jun '24

Dear Observium Community We have for several times experienced problem after Obsevium Professional update. Today we updated from 24.4.13501 to 24.6.13582 (by using $ svn update & $ ./discovery.php -u) OS CentOS Linux release 7.9.2009 (Core) updated today w/ kernel: 3.10.0-1160.119.1.el7.x86_64 After restarting server we struggle logging in to WebGUI. Apache /httpd is complaining on “to many concurrent connections”. Are there any suggestion on how to update Observium without getting these problems? Any householding processes needed for a better update? Or maybe we need to be more patient and give the server some more minutes after update? Today we waited 30 minutes, and still not able to login… R Austevoll Breiband AS - LYSGLIMT Roger Larsen Teknisk sjef / CTO Tlf +47 9523 7640 / +47 5508 0111 Epost roger.larsen(a)ikt.lysglimt.net<mailto:roger.larsen@ikt.lysglimt.net> [signature_3169845242] www.lysglimt.net<http://www.lysglimt.net> Denne e-posten er beregnet for den institusjon eller person den er rettet til og kan være belagt med lovbestemt taushetsplikt. Dersom e-posten er mottatt ved en feil, vennligst returner den til Austevoll Breiband AS og slett den fra systemet. This email with attachments is solely for the use of the individual or entity to which it is addressed. It may contain information that is confidential or legally privileged. If you are not the intended recipient, please return the e-mail to the Austevoll Breiband AS without producing, distributing or retaining copies thereof.

3 3

incomplete list of windows services
by Tony Guadagno 21 Jun '24

21 Jun '24

Hi, I have noticed (now that I am looking) that the list of services on my windows servers is incomplete. In particular, I installed a service about 1 month ago on all my servers and this services does not show on any server in Observium. Can someone tell me how to start troubleshooting this issue? thanks Tony

2 3

Import end devices via CSV - What's the format?
by Chris Cottingham 17 Jun '24

17 Jun '24

I want to import a lot of my devices via a CSV file. I know there is a way to import from the command line but I don’t see much on the file format for the command line utility. Anyone know the best way to import a lot of devices quickly? Is a CSV the best way to go? Thanks!!

2 1

Trial version help
by Chris Humphreys 13 Jun '24

13 Jun '24

Hi all, We are trialling the software and it was working fine but now when accessing the site we get this message. “DB not connected, please check database connection configuration. DB Error 2002: No such file or directory” Any ideas how I might be able to sort this? Thanks Chris Humphreys Senior IT Infrastructure and Applications Manager (m) +44 7852 040601 www.fladgate.com<https://www.fladgate.com/> for Fladgate LLP (p) +44 20 3036 7151 Address click here<https://www.fladgate.com/contact-us> [cid:image001.jpg@01DABCBC.07213020] [Twitter]<https://twitter.com/fladgatellp> [LinkedIn]<https://www.linkedin.com/in/chris-humphreys-1b199535/> [cid:image004.jpg@01DABCBC.07213020]<https://www.fladgate.com/> ----------------------------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachments are CONFIDENTIAL to the named recipient(s) and may be legally privileged. If you are not a named recipient please notify us and ensure that this e-mail is deleted and not read or copied or disclosed to anyone else. E-mail may be corrupted, intercepted or amended and so we do not accept any liability for the contents received unless they are the same as sent by us. E-mail sent or received using our system may be monitored, intercepted or read by us before or after it reaches the recipient; if you reply to this message you consent to this activity in relation to your response. Fladgate LLP is a limited liability partnership, registered in England and Wales with registered number OC334334. It is authorised and regulated by the Solicitors Regulation Authority, number 484783. The term partner is used to refer to a member of Fladgate LLP. A list of members is available at the above registered office. For more information, including our Terms of Business and Personal data processing notice, please visit http://www.fladgate.com -----------------------------------------------------------------------------------------------------------------------------------------

3 2

LDAP - Synology
by Lanham Rattan 07 Jun '24

07 Jun '24

I believe I have LDAP sort of working. I am trying to authenticate against a Synology LDAP server. When I use debug mode I see debug info for invalid users and bad passwords but if I enter a proper user and password there is no debug information and I get the error message “User is disabled”. So, I believe I am missing something. Beyond the server bindings I have these settings: $config['auth_ldap_prefix'] = "uid"; $config['auth_ldap_suffix'] = ",dc=clearnetworx,dc=com"; $config['auth_ldap_groupbase'] = "dc=clearnetworx,dc=com"; $config['auth_ldap_groups']['Observium-Users']['level'] = 5; $config['auth_ldap_groupmembertype'] = "fulldn"; $config['auth_ldap_groupmemberattr'] = "memberOf";

2 1

Cisco ASA stopped reporting port metrics
by Tony Guadagno 24 May '24

24 May '24

Hi, around October 2023 all my asa graphs start looking like this: [cid:image001.jpg@01DAAD26.4CD63480] All my port counters are zero from then on. I have 17 asa's and they all are behaving this way. It is very possible about that time, I applied an update to the asa's. Can someone give me some steps to troubleshoot this, so I can figure out if cisco actually broke something, or if there is an observium issue.... Much appreciated Tony Guadagno

2 1

postgres / nginx app script update?
by Wolf Noble 23 May '24

23 May '24

the "current" version of the postgresql app `unix agent stats script` doesn't seem to work on "modernish" postgres installs ``` root@bluebox:/usr/lib/observium_agent/scripts-available# ./postgresql.pl Use of uninitialized value $version in pattern match (m//) at ./postgresql.pl line 88. Use of uninitialized value $version in pattern match (m//) at ./postgresql.pl line 134. Use of uninitialized value $version in pattern match (m//) at ./postgresql.pl line 140. <<<app-postgresql>>> Use of uninitialized value $version in concatenation (.) or string at ./postgresql.pl line 151. version: cCount:0 tDbs:0 tUsr:0 tHst:0 idle:0 select:0 update:0 delete:0 other:0 Use of uninitialized value in concatenation (.) or string at ./postgresql.pl line 161. xact_commit: Use of uninitialized value in concatenation (.) or string at ./postgresql.pl line 162. xact_rollback: Use of uninitialized value in concatenation (.) or string at ./postgresql.pl line 163. blks_read: Use of uninitialized value in concatenation (.) or string at ./postgresql.pl line 164. blks_hit: Use of uninitialized value $version in pattern match (m//) at ./postgresql.pl line 165. Use of uninitialized value in concatenation (.) or string at ./postgresql.pl line 166. tup_returned: Use of uninitialized value in concatenation (.) or string at ./postgresql.pl line 167. tup_fetched: Use of uninitialized value in concatenation (.) or string at ./postgresql.pl line 168. tup_inserted: Use of uninitialized value in concatenation (.) or string at ./postgresql.pl line 169. tup_updated: Use of uninitialized value in concatenation (.) or string at ./postgresql.pl line 170. tup_deleted: ``` (this is on postgres 14... current is 16... ) Has someone already solved this problem? Also, are there plans to address the current limitation of the nginx `unix agent app script` that constrains it to a single instance of nginx? for systems with multiple containers running isolated nginx stacks, the current 'one instance of an app per monitored device' is kinda limiting... is this something that's likely to be addressed anytime soonish? hope the world's treatin y'all well! W Wolf Noble Hoof & Paw loiosh(a)wolfspaw.com -=[ This message has been composed and transmitted with 100% recycled electrons ]=-

1 0

Locking Down Observium
by Chris Cottingham 22 May '24

22 May '24

Is there any way to setup SAML or Mutual TLS on the Observium server? Chris Cottingham Transmission Facility Engineering Systems + R&D | Apple Music (512) 412-1082 Cell. ccottingham(a)apple.com

3 5

Script transport to Line Notify
by kfps214＠kfps.tp.edu.tw 17 May '24

17 May '24

I write a php script about alert notify，in scripts I use observium variable ex:ALERT_STATE but is valids, vareabels can not show，how do I do?

1 0

Unknown Ports Showing Down.
by lawrence＠e2snail.com 11 May '24

11 May '24

I am very sorry but I am new to Observium and I don't really know how to ask this question. This also means that I have tried but cannot find questions of issues similar to what I am asking. I have a Unifi network. This question happens on all my switches. Is there a way to send a screenshot of what I am seeing. Basically I have an 8 port switch as can be seen below. Each of the physical ports are showing good, apart from port 8 where nothing is connected, but everything from 3/5 up to 3/26 are all down. what are all these ports and where do they source from. Is there a way to suppress them, and have them not showing. Device Port Name Bits[In/Out] Media[In/Out] 192.168.1.50| 0/1|Port 1 2.92Mbps|142kbps| Ethernet|f0:9f:c2:19:50:9c UP 192.168.1.50| 0/2|Port 2 125kbps|2.91Mbps| Ethernet|f0:9f:c2:19:50:9c UP 192.168.1.50| 0/3|Port 3 8bps|5.85kbps| Ethernet|f0:9f:c2:19:50:9c UP 192.168.1.50| 0/4|Port 4 2.83kbps|7.85kbps| Ethernet|f0:9f:c2:19:50:9c UP 192.168.1.50| 0/5|Port 5 9.96kbps|5.78kbps| Ethernet|f0:9f:c2:19:50:9c UP 192.168.1.50| 0/6|Port 6 48bps|5.89kbps| Ethernet|f0:9f:c2:19:50:9c UP 192.168.1.50| 0/7|Port 7 2.22kbps|7.34kbps| Ethernet|f0:9f:c2:19:50:9c UP 192.168.1.50| 0/8|Port 8 0bps|0bps| Ethernet|f0:9f:c2:19:50:9c DOWN 192.168.1.50| 3/1| 0bps|0bps| Other|f0:9f:c2:19:50:9c UP 192.168.1.50| 3/2| 0bps|0bps| Other|f0:9f:c2:19:50:9c UP 192.168.1.50| 3/3| 0bps|0bps| Other|f0:9f:c2:19:50:9c UP 192.168.1.50| 3/4| 0bps|0bps| Other|f0:9f:c2:19:50:9c UP 192.168.1.50| 3/5| 0bps|0bps| Other|f0:9f:c2:19:50:9c DOWN 192.168.1.50| 3/6| 0bps|0bps| Other|f0:9f:c2:19:50:9c DOWN 192.168.1.50| 3/7| 0bps|0bps| Other|f0:9f:c2:19:50:9c DOWN 192.168.1.50| 3/8| 0bps|0bps| Other|f0:9f:c2:19:50:9c DOWN 192.168.1.50| 3/9| 0bps|0bps| Other|f0:9f:c2:19:50:9c DOWN 192.168.1.50| 3/10| 0bps|0bps| Other|f0:9f:c2:19:50:9c DOWN 192.168.1.50| 3/11| 0bps|0bps| Other|f0:9f:c2:19:50:9c DOWN 192.168.1.50| 3/12| 0bps|0bps| Other|f0:9f:c2:19:50:9c DOWN 192.168.1.50| 3/13| 0bps|0bps| Other|f0:9f:c2:19:50:9c DOWN 192.168.1.50| 3/14| 0bps|0bps| Other|f0:9f:c2:19:50:9c DOWN 192.168.1.50| 3/15| 0bps|0bps| Other|f0:9f:c2:19:50:9c DOWN 192.168.1.50| 3/16| 0bps|0bps| Other|f0:9f:c2:19:50:9c DOWN 192.168.1.50| 3/17| 0bps|0bps| Other|f0:9f:c2:19:50:9c DOWN 192.168.1.50| 3/18| 0bps|0bps| Other|f0:9f:c2:19:50:9c DOWN 192.168.1.50| 3/19| 0bps|0bps| Other|f0:9f:c2:19:50:9c DOWN 192.168.1.50| 3/20| 0bps|0bps| Other|f0:9f:c2:19:50:9c DOWN 192.168.1.50| 3/21| 0bps|0bps| Other|f0:9f:c2:19:50:9c DOWN 192.168.1.50| 3/22| 0bps|0bps| Other|f0:9f:c2:19:50:9c DOWN 192.168.1.50| 3/23| 0bps|0bps| Other|f0:9f:c2:19:50:9c DOWN 192.168.1.50| 3/24| 0bps|0bps| Other|f0:9f:c2:19:50:9c DOWN 192.168.1.50| 3/25| 0bps|0bps| Other|f0:9f:c2:19:50:9c DOWN 192.168.1.50| 3/26| 0bps|0bps| Other|f0:9f:c2:19:50:9c DOWN 192.168.1.50| CPU Interface: 5/1| 6.33kbps|3.7kbps| Other|f0:9f:c2:19:50:9b UP Thanks Lawrence

2 1

NEWBIE Question: Global MIB Configuration
by lawrence＠e2snail.com 11 May '24

11 May '24

I am looking through the Global MIB Configuration and I see loads and loads of MIBs that are not used within my infrastructure. Things like Cisco, and A3COM, and many more. My question is two fold. The first is, is it good practise to disable non-used MIBS Then my second question is, is there a way to mass update the disabling of MIBS. The issue is, if I select a MIB and click disable, then the page refreshes and goes to teh top of the page. This is annoying for many because there are very many MIBs that I would like to disable. Thanks in advance for a GREAT product. Keep it up. Thanks Lawrence

2 2

Strange VLAN ID's 4096 + 4097 with VMWare ESX Hosts
by grendel＠grendelbox.de 08 May '24

08 May '24

Observium 23.9.13005 Community Edition shows under PORTS --> VLANs two VLAN which are out of IEEE 802.1Q Range (0-4095) VLAN ID VLAN Name 4096 vlan4096 31 4097 VLAN 4097 after klicking on the VLAN Names it shows for both VLAN-Names all LAN Connects of our VMWare ESXi Hosts we got 2 older ESXi Hosts (v6 level) and 4 new ESXi Hosts (v8 level) an of course NO ESXi has a VLAN ID 4096/4097 Is this some kind of misinterpretation?

4 3

PowerDNS recursive Unix Agent
by Bergen, Ryan 02 May '24

02 May '24

Observium polling PowerDNS Recursor stats broke in Fall 2023 CE update, could we get this fixed? [Observium] Re: PowerDNS Recursive Server application (mail-archive.com)<https://www.mail-archive.com/observium@lists.observium.org/msg00563.html> Oops! Something went wrong! You may want to report this to the Observium developers. explode(): Argument #2 ($string) must be of type string, array given in /opt/observium/includes/polling/applications/powerdns.inc.php:17 Stack trace: #0: (unknown function) called at [/opt/observium/includes/polling/applications/powerdns.inc.php:17] 12: */ 13: 14: if (!empty($agent_data['app']['powerdns'])) { 15: $app_id = discover_app($device, 'powerdns'); 16: 17: foreach (explode(",", $agent_data['app']['powerdns']) as $line) { 18: [$key, $value] = explode("=", $line, 2); 19: $powerdns[$key] = $value; 20: } 21: 22: $data = [ Ryan Bergen Network Lead HyLife Ltd 30 Market Boulevard Steinbach, Manitoba R5G 2X9 p 204-424-2300 x472 hylife.com<https://hylife.com/> • Ryan.Bergen(a)Hylife.com<mailto:Ryan.Bergen@Hylife.com> [cid3813500305*image001.png(a)01D93182.760726F0]

1 0

test ml
by Mike Stupalov 01 May '24

01 May '24

pls ignore me. -- Mike Stupalov, Discord channel: https://discord.gg/GjpNXKWm8W Observium Limited, https://observium.org

1 0

Help with UNIX Agent and Bind
by Timothy Stoddard 23 Apr '24

23 Apr '24

All, I would like some help with the UNIX Agent. I have been able to get the agent up and running on the device and listen on port 36602 which in turn the Observium server can communicate with. I have UNIX Agent turned on in Obervium config and the server does show me a button to turn on "BIND" with a slider button. When I slide the BIND button to ON and press save Observium says "No Application found on this device." I have provided screenshots. What am I missing because I am close to getting this working. I am running Observium 24.3.13396 (stable) Thanks, -- Tim

2 5

Need help with a business question using OBSERVIUM.
by Han Scott 12 Apr '24

12 Apr '24

Dear Team, We are Lineup Korea, a company that provides IT services to customers in South Korea. https://lineupkorea.com/en/main/main.php I am not sure if I am asking the right question, but I am contacting you because I would like to start a business using your OBSERVIUM to provide solutions to our customers. We would like to ask for guidance on whether we need to enter into a business agreement with you for this business, or if there are any regulations in this regard. We look forward to your response. Thanks and Regards, Scott Han SangKi Scott Han Assistant Manager Infra Sales Division Lineupkorea.Co.,Ltd. Mobile: +82 10 4712 0238 Email: skhan(a)lineupkorea.com For take a look at our company website www.lineupkorea.com For urgent assistance dial / +82 2 786 8836 -----Original Message----- From: observium-request(a)lists.observium.org <observium-request(a)lists.observium.org> Sent: Friday, April 12, 2024 3:55 PM To: Han Scott <skhan(a)lineupkorea.com> Subject: Welcome to the "observium" mailing list Welcome to the "observium" mailing list! To post to this list, send your message to: observium(a)lists.observium.org You can unsubscribe or make adjustments to your options via email by sending a message to: observium-request(a)lists.observium.org with the word 'help' in the subject or body (don't include the quotes), and you will get back a message with instructions. You will need your password to change your options, but for security purposes, this password is not included here. If you have forgotten your password you will need to reset it via the web UI.

1 0

Inquiry to find a temporary Professional Observium Licence
by BESANCON Damien [EXT] 11 Apr '24

11 Apr '24

Hello Mrs. / Mr, I'm contacting you regarding our new project to Upgrade our Observium version for the Laposte Company. We would like to find an Observium contact to Discuss and exchange because we'd like to present the Professional Version Of Observium to our colleagues, in order to integrate it in our IT system. We are actually with the Free version of Observium and we were wondering if we may have access to a temporary Professional version of Observium in order to present its benefits, before actually buying it and install it Best regards BESANCON Damien INETUM pour la poste / DSI Groupe La Poste Administrateur réseau CDS LAN DC CENTRE DE SERVICES MUTUALISES SI - CSMSI SERVICES TELECOM, RESEAU & SECURITE Département Exploitation Services Télécom, Réseau & Sécurité 9 rue Konrad Adenauer, 44300 Nantes [Une image contenant texte Description générée automatiquement] Ce message est classifié: [] C0-Public [] C1-Interne [X] C2-Restreint[] C3-Confidentiel Diffusion Restreinte aux groupes ou catégories de personnes identifiées . Si vous n'êtes pas destinataire de ce message, merci de le détruire et d'en avertir immédiatement l'expéditeur. Toute utilisation ou diffusion non autorisée est interdite. Post-scriptum La Poste Ce message est confidentiel. Sous reserve de tout accord conclu par ecrit entre vous et La Poste, son contenu ne represente en aucun cas un engagement de la part de La Poste. Toute publication, utilisation ou diffusion, meme partielle, doit etre autorisee prealablement. Si vous n'etes pas destinataire de ce message, merci d'en avertir immediatement l'expediteur.

1 0

status field in devices table
by Eric W. Bates (he) 10 Apr '24

10 Apr '24

I have 2 Palo Alto firewalls which dropped off the map at the same time about 25 days ago. I think it may have coincided with an Observium upgrade; but I didn't write down update particulars and I don't think Observium maintains a history? When I run discovery with debug there is a SQL query posted (which fails) attempting to lookup the device: SQL[SELECT * FROM `devices` WHERE `disabled` = 0 AND `hostname` LIKE 'vpn01-p.{redacted}' AND `status` = '1' AND `poller_id` = '0' ORDER BY `last_discovered_timetaken` ASC] In this case, the query fails because "status" is actually set to 0. So what is the "status" field for in the "devices" table and how is it set 'wrong?' There is a "statuses" tab in the web GUI for the device's "properties", but in this case (a PAN firewall) there are 2 MIB entries for indicating the fail-over status of the device pair ("HA State" and "HA Peer State"); so I don't think they have anything to do with the "status" field in the DB. -- Clark 159a 508/289-3112

2 5

Cisco9200L
by Dąbrowski Jacek 05 Apr '24

05 Apr '24

3 2

Problems with downgrade from commercial edition to community edition
by observium-mailing-list＠centropolis.net 03 Apr '24

03 Apr '24

Hi, my company was using Observium (Subsciption Edition, SE) for quite a long time so I wanted to stick with Observium for my private lab. Since I have just some private Mikrotik routers and APs in the lab, the commercial edition might be way too mighty for my ~ 10 devices. So I tried to get the old installation downgraded to the CE edition. There was a hint on Observium's website a long time ago but I was not able to find it anymore. So I tried the idea from the current webpage (starting from Community Edition): Since I had an old Mariadb installation, I had to upgrade to Mariadb10.6.17 as well during installation. After I updated the databases with |/opt/observium/discovery.php -u | and made a full discovery with |/opt/observium/discovery.php -h all | |But I ran in trouble with the installation: | |So, my downgrade does not work this way. And yes, I got a backup of the previous installation ;-) | | | | | |I think, this derives from the information, that the CE Version does not support groups (?), but this is just a guess. | | | | | |So basically, I have two questions:| |1. Is there a recipe to downgrade from commercial to community edition? | |2. Would'nt it make sense to have an subscription edition limited to private / home lab (aka advanced private users) users with a limitation in the max. amount of devices? I think, the SE is a little bit too expensive to private installations. And yes, therefore is a CE, but therefore I would need to downgrade which did not work out for me.| | | |Cheers,| |John | | | | | | | | | | | | | | | || ||

2 1

support for Planet
by Dąbrowski Jacek 03 Apr '24

03 Apr '24

Hi, Thank you for the hint, it helped 😊 Still open my second question * Is there any chance to add support for media converter from planet ? https://www.planet.com.tw/en/product/mc-1610mr-mc-1610mr48 Regards Jacek Dąbrowski From: Mike Stupalov <mike(a)observium.org<mailto:mike@observium.org>> Sent: Friday, March 29, 2024 4:06 PM To: Observium <observium(a)lists.observium.org<mailto:observium@lists.observium.org>>; Dąbrowski Jacek via observium <observium(a)lists.observium.org<mailto:observium@lists.observium.org>> Cc: Dąbrowski Jacek <Jacek.Dabrowski(a)selgros.pl<mailto:Jacek.Dabrowski@selgros.pl>> Subject: Re: [Observium] Locations and support for Planet Nie otrzymujesz często wiadomości e-mail z adresu mike(a)observium.org<mailto:mike@observium.org>. Dowiedz się, dlaczego jest to ważne<https://aka.ms/LearnAboutSenderIdentification> Hi, this is nohow related with this update and mostly earlier updates. You have config option for Nested locations menu, and default split char is `,` (comma). Global Settings -> Locations -> Web UI [cid:image003.png@01DA85B4.FB3409B0]

2 1

Observium update
by Eaton, Danny 03 Apr '24

03 Apr '24

All, I’ve inherited the company Observium instance, and it’s been a good 6 months since an update. How difficult is that process to upgrade the Observium software? [https://www.westlake.com/sites/default/files/WestlakeEmailFooter.jpg] The information transmitted, including any attachments, is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited, and all liability arising therefrom is disclaimed. If you received this in error, please contact the sender and delete the material from any computer.

2 1

VM Tab on Observium
by farhaan.haroon＠hellogroup.co.za 02 Apr '24

02 Apr '24

Hi Guys Can you advise on how to get the VM Tab to appear on my console? I am using Observium Pro. Installed on a debian box. i have added my host onto observium and that works fine. I would like to be able to see each vm on that host Via Observium.

2 4

Locations and support for Planet
by Dąbrowski Jacek 29 Mar '24

29 Mar '24

Hello, I have two threads * After the last update (24.3.13402 15th March 2024) the locations have split, it is first there are streets, then cities ??? [cid:image011.png@01DA81E2.C0A98CA0] * Is there any chance to add support for media converter from planet ? https://www.planet.com.tw/en/product/mc-1610mr-mc-1610mr48 Regards Jacek Dąbrowski

1 0

Rebuild Device Group
by mamitchell＠kern.org 25 Mar '24

25 Mar '24

I noticed that in the code change r13391 the rebuild button has been removed. Is there a manual way to rebuild still or do I just have to wait?

1 0

span port on hp switch alerts as down....why?
by Tony Guadagno 22 Mar '24

22 Mar '24

Hi, I have created a simple checker to notify on some specific ports. The way I built it is that I include the word "alert" on the description. The checker parses that and alerts if that port goes down. This is working fine for the most part...except on one port. On my switch, C8 is a fiber 10gig port and it is up as shown here: Status and Counters - Port Counters for port C8 Name : random span port MAC Address : eaaaa3-cd9bb8 Link Status : Up Port Enabled : Yes [cid:image002.jpg@01DA7C37.EF9B2A60] However, the checker lists it as down: [cid:image009.jpg@01DA7C37.EF9B2A60] The test conditions are pretty simple: [cid:image010.jpg@01DA7C37.EF9B2A60] The only difference between the ports that work and C8 are; it is 10gig fiber and it is a span port...do either of these issues explain why this port is listed as down (only by the checker)??? Thanks in advance! Tony Guadagno O +1 585 577 1003 C +1 585 703 6700 E tonyg(a)guadagnoconsulting.com<mailto:tonyg@guadagnoconsulting.com> [cid:image001.jpg@01D84DD6.FC9912E0]

2 2

Capture gaps when retrieving interface traffic data …
by Stefan Schmidt 19 Mar '24

19 Mar '24

Hello! We query with snmp Observium the port data from a Mikrotik router (CCR2004-16G-2S+) with RouterOS 7.14.1 (Level 6) via SNMP from 4 WAN interfaces with polling and alerts. However, we always have gaps in the data. Every now and then 5-10 minutes of data are missing, so that vertical lines without data appear in the rrd - of course this only becomes clear in the 6h overview. We are surprised because we have the impression that it only started on this device (and others) almost a year ago. We therefore renewed the hardware, reinstalled the system (debian12) and only queried this router alone (also deleted the query from the old Observium to avoid parallel double queries). We look at https://.../pollerlog/ and see our patient there: Device Last Polled 10.X.X.1 100% 108.67s (...) and others of the location with 1-19%... Why 100%... where are the key data relevant here? We would be happy if someone could help us adjust the Observium "Poller Wrapper" parameters if necessary. Is there potential for adaptation there? Greetings Frankfurt/Main Stefan

3 5

Alert checker conditions
by David Milton 18 Mar '24

18 Mar '24

Hello, I'm attempting to create an alert checker for our router and switch power supplies. I seem to be part way there but am seeing some unexpected behaviour that I cannot explain. I started with the test condition: sensor_event notequals ok and the associations are "or:" Sensor Description match PEM* Sensor Description match Power Supply 0 @* Sensor Description match Power Supply 1 @* Here's a specific device inventory showing PEM 0 status is currently down: It seems the last two associations don't mach anything and for some reason the PEM* association only matches the power supplies that are ok, not the one I want the alert for which is currently down. I've tried to match against "Power Supply" and that matches power supplies in my servers but they don't seem to have a status, more like a current sensor instead. I'm attempting to deal strictly with the power supplies in our Juniper routers and switches and from what I can tell they all have a status/sensor_event state. I think the two "Power Supply 0 @*" associations should also match additional power supplies as shown in the list below taken from the hardware inventory and filtering for a description of Power Supply: Clearly I'm missing something en the alert checker associations but I'll be darned if I can figure out what that is. I've tried to match on MIB as well but nothing seems to match those power supplies. What am I missing here? Thanks, Dave.

2 8

port down on UI
by Arnoldo Vidal Bravo 18 Mar '24

18 Mar '24

How I can keep a port down (monitored) warning until recover mail is sent? by default it's showed 1 day, i want show while alert is active (1, 2, 3...n days) -- Saluda cordialmente

1 0

Dell RAID Controllers etc. appearing as failed
by Chris James 16 Mar '24

16 Mar '24

Morning, Anyone know why "Drive Controller PERC H730 Mini (Embedded)<http://192.168.0.250/device/device=4/tab=health/metric=status/id=826/>", "Drive ID<http://192.168.0.250/device/device=4/tab=health/metric=status/id=827/>", "Drive List of Physical Disks on Controller PERC H730 Mini (Embedded)<http://192.168.0.250/device/device=4/tab=health/metric=status/id=825/>", and "Controller Status<http://192.168.0.250/device/device=4/tab=health/metric=status/id=824/>" show as "fail"? This is on various Dell servers (R620, R730). It would be good to either have this working or just ignore them altogether. Any ideas welcome. Chris Chris James Vessel Production Systems Manager

1 0

How Can I Update SNMP Community of devices without losing history Data
by Farah Ameri Mahabadian (famerima) 12 Mar '24

12 Mar '24

Hello Observium Team, I want to update the total Devices SNMP configuration, but I don’t want to lose the history of data what should I do ? Thanks in advance !! Farah

3 5

Assistance Updating Observium
by Shedd, Ryan 11 Mar '24

11 Mar '24

Hi There, I have been attempting to reach someone from the Observium team to assist my company and I in updating our Software. We followed the instructions on the website located here: https://docs.observium.org/updating/ We did not have success. Our Observium server is hosted on a Linux Ubuntu server. Is there someone at Observium that could take a few minutes and assist us please? I look forward to hearing from you. Ryan Shedd Network Engineer Slocum-Dickson Medical Group P.L.L.C. 1729 Burrstone Road New Hartford, New York 13413 (315) 798-1777 (315) 798-1712 - Fax rshedd(a)sdmg.com<mailto:rshedd@sdmg.com> CONFIDENTIALITY NOTICE: The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer.

1 0

Re: observium Digest, Vol 164, Issue 3
by Rob VanHooren 06 Mar '24

06 Mar '24

nobody said Happy Birthday Adam?? geez you guys ¯\_(ツ)_/¯

4 3

jnxVirtualChassisMemberLocation for Juniper Virtual-Chassis
by Laszlo Mazsari 04 Mar '24

04 Mar '24

Hello Observium Team, In our Datacenters we would like to make use of "jnxVirtualChassisMemberLocation" for Juniper switches using Virtual-chassis techhnology. Normally virtual-chassis are in different locations for redundancy reasons. The "snmp location" is not really good to capture the location of the device (as the two switches are in different places but location will show what is configured with "snmp location" command). We updated our switch config with "jnxVirtualChassisMemberLocation" information, but we still dont see the data in Observium. > show snmp mib walk jnxVirtualChassisMemberLocation jnxVirtualChassisMemberLocation.0 = B-U-099 R01.01 jnxVirtualChassisMemberLocation.1 = B-U-098 R01.02 Is this feature on the roadmap to be added? Not sure how much additional work this feature to be added, but going for the Enterprise model may potentially help with this feature request? Thank you for the feedback. Best regards, Laszlo Mazsari Network Engineer laszlo.mazsari(a)green.ch<mailto:laszlo.mazsari@green.ch> Z: +41 56 460 23 23 D: +41 56 460 23 37 [cid:image001.png@01DA6E0F.64E03130]<https://www.facebook.com/green.ch.datacenter> [cid:image002.png@01DA6E0F.64E03130]<https://www.linkedin.com/company/green-ch-datacenter/> [cid:image003.png@01DA6E0F.64E03130]<https://www.youtube.com/@green.ch.datacenter> [green.ch]<http://www.green.ch/de/blog/detail/green-wo-neue-welten-wahr-werden> Green Datacenter AG * green.ch AG * Industriestrasse 33 * 5242 Lupfig * www.green.ch<https://www.green.ch/>

1 0

... subscription has been disabled from email nikto.barrada@gmail.com
by Klaatu Barrada Nikto 29 Feb '24

29 Feb '24

observium(a)lists.observium.org Good day, I am reacting to your decision to prohibit the sending of information. Based on your decision, I checked my email settings and found no problems. I received the last email from your email address observium(a)lists.observium.org on February 15, 2024 at 1:06 p.m. I have not received any email since then. Can you please explain to me why the problems occur when I don't see anything (this does not rule out that there may be problems)? If I understood correctly, my email box refuses to accept your emails. Short summary: - the email address is on the list of Trusted senders - the storage size set aside for emails is 15 GB (0.21 GB occupied) - the number of senders is limited to the designated list, others are in SPAM - Your email address observium(a)lists.observium.org is not there... Sincerely, Barrada Nikto PS: Automatic translation

1 0

Casa c100G SNR curve on upstream interface
by sebastien.gay＠mycable.ch 27 Feb '24

27 Feb '24

The casa is recognized as "CASA-DCTS". I don't have the upstream noise curves. Should I add mib

1 0

ping probe not running
by Tony Guadagno 27 Feb '24

27 Feb '24

Hi, i have created a bunch of ping probes in the past and never had an issue, however, on this particular install...I created a single ping probe and it has not run after days. How do I troubleshoot this issue? Thanks [cid:image003.jpg@01DA6955.14B8C140] [cid:image004.jpg@01DA6955.14B8C140] Tony

3 5

Mass SNMP Edit
by Nirmolak Singh Bajaj 27 Feb '24

27 Feb '24

Hi, I have migrated my devices from SNMp v1/2c to SNMP v3. As we have quote a number of devices, is there a script or anyway to mass edit the SNMP settings to v3 for these specific devices? We have put in config.php for v3 autodiscovery, but it isn't working. Warmest Regards, Nirmolak Singh

2 2

Adding more Nagions plugins
by Brad Bendy 19 Feb '24

19 Feb '24

I went ahead and added another plugin to the /usr/lib/nagios/plugins directory where all the other working plugins are. When I go to add a probe it doesn't show up in the drop down box. Is there something that has to be ran to look for new plugins? Permissions/use/group are the same as the other plugins that work. Thanks

2 1

dark ui image legend legibility
by Wolf Noble 16 Feb '24

16 Feb '24

Howdy, all! is there some voodoo necessary to coerce observium to generate graphs with textual legends that aren't black when dark mode is active? it's kinda hard to view black text on dark blue backgrounds :) I don't see an obvious knob for this, but it's entirely possible I'm just missing the "legend text color" or "make graph text legible in dark mode" or "learn to read" button somewhere :) [= The contents of this message have been written, read, processed, erased, sorted, sniffed, compressed, rewritten, misspelled, overcompensated, lost, found, and most importantly delivered entirely with recycled electrons =]

3 22

Syslog repetitive alerts
by joston.gatt＠hudson.com.mt 16 Feb '24

16 Feb '24

Is it possible to suppress repetitive syslog alerts? if yes how can I do this? The issue is I have a particular site which has an issue with one of the internet connections, it keeps disconnecting and reconnecting every 2 minutes. A syslog event is logged each time and I am getting an email alert for each log.

1 0

Upgrading O/S of Observium Server - Debian 10 to 11 (or 12)
by Andy Hartwell 15 Feb '24

15 Feb '24

Advice please ! 😊 I have a server which has been running Observium well for some time. Although upgrading the Observium build is easy enough following the instructions at Updating - Observium<https://docs.observium.org/updating/#upgrading-the-subscription-edition-to-…> this obviously does not update the O/S itself. I had a try at upgrading following online instructions yesterday but after he upgrade was complete the Observium web interface would not display – I just got a page of text which I assumed to be PHP script being displayed rather than “running”. Does anyone have any idiot proof (ie aimed at Linux novice) guidance to upgrade the OS without breaking Observium ? Luckily I had taken a snapshot of the VM so could roll back without any drama. Thanks, Andy Hartwell

3 4

sysLocation gets rewritten
by Martin 13 Feb '24

13 Feb '24

Hello, I am experiencing something I don't understand. During polling of a host the syslocation -which is returned correctly by snmp- gets changed into another location (which is an old location before moving from "Address B" to "Address A"). $ /usr/bin/snmpget -v3 -l 'authPriv' -n '' -x 'AES' -X 'passwd' -a 'SHA' -A 'passwd' -u 'username' -Pud -Ih -OQUs --hexOutputLength=0 -m SNMPv2-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'HostName':'161' sysUpTime.0 sysLocation.0 sysUpTime.0 = 0:8:31:49.72 sysLocation.0 = "Address A" This is the correct address returned. A few lines lower in my debugging output I see: sysLocation rewritten from 'Address A' to 'Address B' by DB override. Even if I change the address in mysql to the correct address the polling process keeps changing it to the old address. MariaDB [observium]> select hostname, location from devices where device_id=9811; +-------------------------+--------------+ | hostname | location | +-------------------------+--------------+ | HostName | Address B | +-------------------------+--------------+ My questions: - Why is this happening? - How can I prevent this from happening? - Where does the old address come from? I hope someone can shed some light on this strange issue... Thanks, Martin

3 4

Microsoft Teams Notification Template
by Lars Joergensen 12 Feb '24

12 Feb '24

Hey Seems the template for notification on MS Teams is broken (see below). I'm trying to make my own, but would like to know which of the templates in includes/templates it is based on, so I know where to start. [cid:image001.png@01DA58E7.CA53A520] Lars ________________________________ Disclaimer: This e-mail, including any attachments, is for the intended recipient only. If you have received this e-mail by mistake please notify the sender immediately by return e-mail and delete this e-mail and any attachments, without opening the attachments, from your system. Access, disclosure, copying, distribution or reliance on any part of this e-mail by anyone else is prohibited. This e-mail is confidential and may be legally privileged. Chr. Hansen does not represent and/or warrant that the information sent and/or received by or with this e-mail is correct and does not accept any liability for damages related thereto. https://www.chr-hansen.com/en/legal-notice

2 2

alert checker for specific ping probes
by Tony Guadagno 07 Feb '24

07 Feb '24

Hi, I have a bunch of ping probes and I would like to write an alert for some (but not all). Since the hostname is the same for all, how can I differentiate between them in an alert checker...for example, I want to alert on this: [cid:image001.jpg@01DA551D.A2E6D3E0] But not this: [cid:image002.jpg@01DA551D.A2E6D3E0] thanks Tony Guadagno O +1 585 577 1003 C +1 585 703 6700 E tonyg(a)guadagnoconsulting.com<mailto:tonyg@guadagnoconsulting.com> [cid:image001.jpg@01D84DD6.FC9912E0]

3 11

Remove Switch Access interfaces from polling
by Massimo Cirulli 07 Feb '24

07 Feb '24

Hi All, I'm a newbie user of Observium. I need to clear the polling in order to not have the access port checked on the campus that we monitored. We have about 50k access interfaces splitted on Cisco and HP Aruba stack. I understand that i declare in config.php the bad iface but they have different name: Cisco -> Gi1/0/1 HP Aruba -> 45 My goal is: only the uplink will be checked. How can i use the config for access layer Cisco and Aruba stack (iface range) ? $config['bad_if'][] = " Gi1/0/1 ->?"; $config['bad_if'][] = "1->"; Thanx in advance for your support Massimo

1 0

Re: alert checker for specific ping probes
by Tony Guadagno 04 Feb '24

04 Feb '24

Observium support: can someone please address my question. Thanks Hi, I have a bunch of ping probes and I would like to write an alert for some (but not all). Since the hostname is the same for all, how can I differentiate between them in an alert checker...for example, I want to alert on this: [cid:image004.jpg@01DA55E7.8703CAF0] But not this: [cid:image005.jpg@01DA55E7.8703CAF0] thanks Tony Guadagno O +1 585 577 1003 C +1 585 703 6700 E tonyg(a)guadagnoconsulting.com<mailto:tonyg@guadagnoconsulting.com> [cid:image001.jpg@01D84DD6.FC9912E0]

3 4

regarding STP change alert
by Gurupad Deshmukh 27 Jan '24

27 Jan '24

Dear team, can we monitor stp change and broadcasting in cisco/huawei switches please help to configure STP change alert. regards, gurupad.

1 0

Re: observium Digest, Vol 162, Issue 17
by Chris Wopat 25 Jan '24

25 Jan '24

> > Date: Wed, 24 Jan 2024 15:41:29 -0700 > From: Brad Bendy <brad.bendy(a)gmail.com> > Subject: [Observium] FEC errors / FEC statistics > To: Observium <observium(a)lists.observium.org> > > Hi, > > We've got various Juniper devices with links that have FEC enabled and > CLI output shows the FEC stats, but I don't see them anywhere in > Observium. > > Is this not supported or am I missing something to where it's at / > what is it called? > We opened a JTAC case about this a year or so ago. At the time, there is NO fec available via ANY snmp mib. "we currently do NOT have support for Ethernet FEC Statistics via SNMP. There is a feature request that has been created internally to add support for it" Ask your SE about "RLI 46223" --Chris

2 1

Error in Observium
by Luis Enrique Torres Jacinto 25 Jan '24

25 Jan '24

Hello, good morning I have a problem seeing the information of 3 Cisco CBS350 Switches in observium (professional version), I add them normally like any other device, however it does not show me its Processor, Temperature, fanspeed, Status Indicators, etc. [cid:image006.jpg@01DA4F7C.759355E0] In other Cisco Switch models the tool works correctly. [cid:image007.jpg@01DA4F7C.759355E0] With the following command ./discovery.php -h 10.1.X.X. we found the following error: [cid:image005.png@01DA4F7C.5F5A1890] If anyone can support me I would appreciate it. Greetings

1 0

FEC errors / FEC statistics
by Brad Bendy 25 Jan '24

25 Jan '24

Hi, We've got various Juniper devices with links that have FEC enabled and CLI output shows the FEC stats, but I don't see them anywhere in Observium. Is this not supported or am I missing something to where it's at / what is it called? Thanks

2 1

cisco ASA's polling slow
by Tony Guadagno 24 Jan '24

24 Jan '24

Hi, I am just noticing that my Cisco ASA's poll really slow. While all my other infrastructure seems to poll about 5 to 7 sec per device, the ASA's all take 50 to 60 sec. Does anyone know why this is and maybe how to speed things up? Thanks Tony Guadagno O +1 585 577 1003 C +1 585 703 6700 E tonyg(a)guadagnoconsulting.com<mailto:tonyg@guadagnoconsulting.com> [cid:image001.jpg@01D84DD6.FC9912E0]

3 5

Re: Aruba Instant AP wireless info? (clients, etc)
by Wolf Noble 21 Jan '24

21 Jan '24

I’d be happy to help however I can with this.. I'd really like to be able to see some information from my APs around usage/clients/errors/etc.... if you want more mib walks i can update the jira ticket with them again? but im not sure there will be much else to glean as not much has changed here.. if that's jus not gonna happen .... for.... whatever reason ... is there a vendor whose APs *ARE* well supported? I'd kinda figured this would be a solved problem.... or at least, wouldn't still be an issue several years later. is there anything I can do to help get traction here? I'm not sure what help is actually helpful and what's obnoxious ;) W [= The contents of this message have been written, read, processed, erased, sorted, sniffed, compressed, rewritten, misspelled, overcompensated, lost, found, and most importantly delivered entirely with recycled electrons =] > On Nov 14, 2023, at 20:47, Adam Armstrong via observium <observium(a)lists.observium.org> wrote: > > I think someone asked about this last week, and it appears we don't actually have any support for any wireless metrics from Aruba at all at the moment. > > I do have a set of walks from an aruba device and might look at adding some support for them, though. > > Wireless is a bit of a mess, all of the vendors present the data in different ways with different demarcations, so it's quite difficult to collect and handle all of the different vendors in a sane manner. > > adam. > > Wolf Noble via observium wrote on 14/11/2023 23:40: >> howdy all! >> >> does anyone else have the problem of seeing no wireless stats in observium from Aruba instant APs? >> >> [= The contents of this message have been written, read, processed, erased, sorted, sniffed, compressed, rewritten, misspelled, overcompensated, lost, found, and most importantly delivered entirely with recycled electrons =] >> >> >> _______________________________________________ >> observium mailing list -- observium(a)lists.observium.org <mailto:observium@lists.observium.org> >> To unsubscribe send an email to observium-leave(a)lists.observium.org <mailto:observium-leave@lists.observium.org> > > _______________________________________________ > observium mailing list -- observium(a)lists.observium.org > To unsubscribe send an email to observium-leave(a)lists.observium.org

2 2

LXC Proxmox Container
by Yesaya A. Medellu 21 Jan '24

21 Jan '24

Hi All Can Observium Monitoring LXC Container at least count it as VM inside PVE VMs thanks in advance Abraham Makingroup Disclaimer: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error, please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee, you should not disseminate, distribute or copy this email. Please notify the sender immediately by email if you have received this email by mistake and delete this email from your system. Makingroup Disclaimer: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error, please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee, you should not disseminate, distribute or copy this email. Please notify the sender immediately by email if you have received this email by mistake and delete this email from your system.

3 2

need help to subscribe professional.
by Gurupad Deshmukh 19 Jan '24

19 Jan '24

Dear team, I have install observium communitiy edition on ubuntu, but I want to subscribe professional version , can you please help us how to upgrade subscription. please share contact details , I have some queries to clear before professional subscription. Regards, Gurupad deshmukh, 9767416210.

2 1

PowerDNS Recursive Server application
by Kevin Riahi 17 Jan '24

17 Jan '24

What is the process for support on applications for observium subscribers? In this case the PowerDNS Recursive Server application. Should we reach out to the original author. In this case the script is very simple and it seems it has no documented authors. The issue is the script is no longer working even though it was in the past. It may be because PowerDNS Recursive Server 4.8 has made permission changes to /var/run/pdns-recursor/pdns_recursor.controlsocket Testing the script /usr/lib/observium_agent/local/powerdns-recursor and it will execute with below error. <<<app-powerdns-recursor>>> Fatal: Unable to connect to remote '/var/run/pdns-recursor/pdns_recursor.controlsocket': Permission denied Here is the powerdns-recursor script . #!/bin/sh recctrl=`which rec_control` if [ $? -eq 0 ] then echo '<<<app-powerdns-recursor>>>' $recctrl get-all fi TIA Kevin

4 6

RRD went missing after interface description change, screwing up billing.
by smiller＠fasttrackcomm.net 16 Jan '24

16 Jan '24

Hey there, I have a bundle ether interface that had its interface description change, and now when I'm viewing the bill summary which keys to this bundle ether interface, the graphs are missing, and if I hover over the port under "billed ports" in the bill information section, I get 4 of the same error: ERROR: opening '/opt/observium/rrd/<<IP>>/port-113.rrd': No such file or directory. I go into the server and sure enough there is no port-113.rrd in that directory. Also, the port description name under the billed ports section shows the old interface description still. I have another bundle ether that also had an updated interface description and that one is fine, and the port description is updated correctly on the billing page. How do I fix this? It seems like maybe data is still getting successfully pulled because the Used counts are increasing along with the average. What would happen if I created an empty port-113.rrd file in the directory, and why would this file have gone missing? Thanks for any help you can provide. -Seth

1 0

ZyXEL WLAN AP NWA1123ACv3
by Oberreiter Andreas 12 Jan '24

12 Jan '24

Hi, I have ZyXEL WLAN AP NWA1123ACv3 they are spoiling my system by creating new ports, with repeating names, every view hours. I have some APs with nearly 2000 Ports. Is there a way to prevent Observium from scanning for new ports for a specific device group. Kind Regards Mit freundlichen Grüßen Andreas Oberreiter

1 1

upgrade CE edition to Professional edition
by Raphael Pierazzi 10 Jan '24

10 Jan '24

Good morning , I would like to upgrade from the CE edition to the professional edition ( and paid). I risk losing my configuration? how does the upgrade work? Thanks for your feedback, Sincerely,

2 2

Performance
by Arnoldo Vidal Bravo 08 Jan '24

08 Jan '24

Hello, we have installed observium 23.2.12520. When the survey is carried out on the devices, there are several that indicate that the time used was 1 or 2 seconds while others exceeded 20 seconds. How could this be fixed? The devices have the same make and model. -- Saluda cordialmente

1 0

SNMP sysLocation NeDi format
by Brad Bendy 08 Jan '24

08 Jan '24

I found a post from 2014 showing the NeDi format works when using the Google API. I have tried a few different variations of it but under the location it shows a location for each device as the rack unit is different per device. Is this not supported and we should just do the physical location and not deal with the rack and rack unit or I am missing something? I thought before I had used () or [] in the location and the map parsing still worked but I don't see that in the docs anywhere. Thanks

1 0

PHP Weathermap Integration
by Adam Armstrong 03 Jan '24

03 Jan '24

Hi Guys, We added PHP Weathermap into Observium ~2 years ago, but the enabling option wasn't documented because there was an odd javascript bug breaking the UI. It turns out the bug was the same variable name being used in two completely separate bits of code, causing a clash. Typical Javascript. This is fixed now and it mostly functions, so I've unhidden the enabling option in the web-based config. $config['weathermap']['enable'] = TRUE; It works slightly differently to the original weathermap, it generates maps on the fly and is a little better integrated into the UI. It retains all of the old issues though, the weathermap code is very, very old and should not be enabled on installs untrusted people have access to. Thanks, adam. -- Sent from Postbox <https://www.postbox-inc.com/?utm_source=email&utm_medium=siglink&utm_campai…>

3 2

xinetd not supported on RHEL 9, use systemd instead
by Tony Guadagno 29 Dec '23

29 Dec '23

Hi, as xinetd is not provided for RHEL 9, I wrote a couple of systemd units to make this work. I am sure someone smarter than me could make this better, but I have confirmed this does work on any modern systemd implementation. Would it be possible to get this in the documentation so the knowledge is not lost? Here is the info: Create a new file: /etc/systemd/system/observiumagent.socket Paste this into the file: [Unit] Description=Observium Agent Socket Requires=observiumagent@.service [Socket] ListenStream=36602 Accept=yes [Install] WantedBy=sockets.target Change permissions on the file: Chmod 660 /etc/systemd/system/observiumagent.socket Create another new file: /etc/systemd/system/observiumagent@.service<mailto:/etc/systemd/system/observiumagent@.service> Paste this into the file: [Unit] Description=Observium Agent Server PartOf=observiumagent.socket [Service] ExecStart=-/usr/bin/observium_agent #User=example #Group=example StandardInput=socket Sockets=observiumagent.socket Change permissions on the file: Chmod 660 /etc/systemd/system/observiumagent@.service<mailto:/etc/systemd/system/observiumagent@.service> Reload systemd: systemctl daemon-reload Enable and start the service: systemctl enable --now observiumagent.socket That's it, of course, follow the rest of the direction on the page (UNIX Agent - Observium<https://docs.observium.org/unix_agent/>), just ignore the ones involving xinetd Thanks ) Tony Guadagno O +1 585 577 1003 C +1 585 703 6700 E tonyg(a)guadagnoconsulting.com<mailto:tonyg@guadagnoconsulting.com> [cid:image001.jpg@01D84DD6.FC9912E0]

2 1

Traffic accounting not working anymore
by Anthony Polselli 13 Dec '23

13 Dec '23

We recently built a new server with Ubuntu 22.04.3 LTS and migrated Observium over. Everything seams to be working fine except for the Traffic Accounting. On the summary screen, it shows data from months ago (just before the upgrade), but when you click on one of the "bills" and look at the bandwidth graph, it's blank. I've tried adding a new bill and it same thing, no data. But if I click on the interface and go the that switch port, all the graphs are there. How can I reconnect the Traffic Accounting to pull data from the switchport graphs again? Thanks all!

2 2

Network Traffic Map
by rpierazzi＠azfrance.fr 11 Dec '23

11 Dec '23

Good morning, I would like to know how to program the visualization of the network Traffic Map. When I go to the page and click on one device, nothing happens.. Thanks for your feedback, Sincerely,

1 0

units on error graphs?
by Tony Guadagno 04 Dec '23

04 Dec '23

Hi, sorry if this is obvious, but it just occurred to me that I don't understand this graph. This comes from an Ethernet port on a cisco router.... [cid:image001.jpg@01DA26BB.DFC59A20] What are the units??for example the "last in errors/s" is 44.25m???? 44.24 million? That can't be right. Thanks in advance Tony Guadagno O +1 585 577 1003 C +1 585 703 6700 E tonyg(a)guadagnoconsulting.com<mailto:tonyg@guadagnoconsulting.com> [cid:image001.jpg@01D84DD6.FC9912E0]

2 5

is it possible to disable an alert checker?
by Tony Guadagno 30 Nov '23

30 Nov '23

Hi, is it possible to disable a specific alert checker without deleting it? I am debugging an alert checker that is pretty noisy so I want to stop the alerts for a bit but I don't want to loose the work I have put into it. thanks Tony Guadagno O +1 585 577 1003 C +1 585 703 6700 E tonyg(a)guadagnoconsulting.com<mailto:tonyg@guadagnoconsulting.com> [cid:image001.jpg@01D84DD6.FC9912E0]

2 2

Discovery problem with an old Dell Powerconnect and Observium CE 23.9.13005
by mosdvas 30 Nov '23

30 Nov '23

Hello, After the last update i'm experiencing a bug on the discovery on an old switch. This is a Dell PowerConnect 3448. : Vendor/Hardware Dell PowerConnect 3448 Operating system Dell PowerConnect (FastPath) 2.0.0.34 The bug appeared in this CE version, until now the info feedback was correct. The SNMP poller seem ok. Can you help me with this problem? Here's the error dump : ##### Module Start: sensors ##### o POWER-ETHERNET-MIB pethMainPseOperStatus [] o OLD-DNOS-BOXSERVICES-PRIVATE-MIB ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣀⡀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣠⡶⠋⠁⠙⣦⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⣠⡶⠛⠛⠲⣤⣀⠀⠀⠀⠀⡀⠀⠀⠀⠀⠀⠀⠀⣠⠄⣠⣾⣡⠀⠀⠀⠀⠸⡆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⢰⡏⠀⠀⠀⠀⠈⣿⣷⣤⡐⣄⣽⡾⠧⠤⠤⣤⣤⣾⣿⣾⣿⣯⣀⡀⠀⠀⠀⢠⡇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⢷⡀⠀⠀⠀⠀⣿⣿⣿⣿⣿⣯⣤⣤⡀⣠⣈⣹⣽⣿⣿⣿⣿⣷⣦⣄⠀⢀⡾⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠈⠻⣆⠀⠀⠀⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡟⠀⣠⠞⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠈⢳⣆⠘⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣧⣾⣷⣶⣤⣀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⣘⣿⣿⣿⣿⣿⣟⣿⣿⣿⣿⣿⣿⣿⣿⢡⡼⣿⣿⣿⣿⣿⣿⣿⣿⣿⣷⣄⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⣾⣿⣿⣿⣿⣿⡏⣯⡇⣿⣿⣿⡏⣿⣿⣿⣜⣛⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡷⣄⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⣿⣿⣿⣿⣿⣿⣿⣭⣾⣿⣿⣿⣇⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡿⠃⠀⠘⢷⣄⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⢠⣿⣿⡏⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡏⢿⣿⣿⡿⠁⠀⠀⠀⠸⣿⣷⡀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⢸⣿⣿⡇⠈⢻⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⠻⣿⣿⡟⢠⣿⣿⡟⠁⠀⠀⠀⠀⠙⣻⣿⣿⣆⠀⠀⠀⠀⠀ ⠀⠀⠀⠈⣿⣿⣷⡈⠛⠿⣿⣿⡆⠻⢿⣿⣽⣿⣯⣿⠿⠃⠀⠻⠛⣰⣿⣿⠏⠀⠀⠀⠀⢀⣙⣿⣿⣿⣿⣿⣧⡀⠀⠀⠀ ⠀⠀⠀⠀⢿⠈⠙⠻⠷⠤⠄⢉⡁⠀⠀⠙⢉⣵⣌⠀⠀⠀⣀⠄⠘⠛⠋⠁⢀⣀⣤⣤⣭⣭⣽⣿⣿⣿⣿⣿⣿⣷⡀⠀⠀ ⠀⠀⠀⢀⣿⡄⠀⠀⠀⠀⠀⠀⠉⠓⢦⣄⡉⠉⢉⣩⠶⠋⠁⠀⠀⠀⣠⣾⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣷⡀⠀ ⠀⠀⠀⣼⣿⣿⣷⣶⣶⣆⣀⡀⠀⠀⠀⠀⠉⠉⠉⠀⠀⠀⠀⠀⣠⣾⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣧⠀ ⠀⠀⠀⣿⣿⣿⣿⣿⣿⣿⣥⣄⡀⠀⠀⠀⠀⠀⠀⠀⠀⣸⣦⣾⣿⣿⣿⣿⣿⣿⡿⠿⠿⡟⠿⣿⣟⡿⢿⡛⠀⣘⣿⣿⡆ ⠀⠀⠀⢿⣿⣿⠿⠿⠿⠿⢿⣿⣿⣷⣿⡆⠀⠀⣶⣶⣾⡿⠛⠛⠛⠛⠻⣿⣿⣿⡟⠉⠀⠀⠀⠈⠁⠁⢀⢀⠲⣬⣿⣿⡇ ⠀⠀⠀⠘⡏⠳⣤⡄⠀⡄⠀⠀⠈⠙⢿⣧⠀⢀⣿⣿⠏⠀⠀⠀⠀⢀⣠⣿⣿⠋⠀⠀⠀⠀⠀⠀⠀⠀⠈⣯⣷⣿⣿⣿⡇ ⠀⠀⠀⠀⢿⠀⠀⠉⠳⣇⠀⠀⠀⠀⠀⢻⠀⢸⣿⣿⣆⢠⠀⡆⣰⡿⠟⠉⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⡾⣿⣿⣿⣿⣿⡇ ⠀⠀⠀⠀⠘⣧⠀⠀⠀⠹⣷⣤⣄⠀⡈⣾⡆⢸⡿⠋⠿⠾⠴⠷⠋⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⣠⠞⠉⣶⣾⣿⣿⣿⣿⠀ ⠀⠀⠀⠀⠀⠈⠳⣄⠀⠀⠀⠉⠻⣿⣿⣿⣇⠸⡷⠀⠀⠀⢀⣠⢄⣠⣶⣤⣤⣤⡤⠤⠖⠛⠉⠀⠠⣤⣼⣿⣿⣿⣿⡏⠀ ⠀⠀⠀⠀⠀⠀⠀⠉⢻⣷⠶⠒⠀⠀⠁⠈⢿⡄⣷⣆⣤⣶⡿⠛⠛⠛⠉⠉⠉⠁⠀⠀⠀⠀⠀⠀⠀⠈⢿⣿⣿⣿⣿⠇⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠘⣏⠀⠀⠀⠀⠀⠀⠘⣧⣿⣿⡿⢋⡤⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠰⣾⣿⣿⣿⣿⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⢻⡄⠀⠀⠀⠀⠀⠀⢸⣿⣿⣶⣫⠆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⡀⢦⣵⣿⣿⣿⣿⠇⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢻⣆⠀⠀⠀⠀⠀⠀⣿⣿⣿⠇⠀⣀⠀⠀⠀⠀⠀⠀⠀⠀⠳⠦⣴⣿⣶⣿⣿⣿⣿⡿⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠛⢷⣄⠀⠀⠀⠀⢹⣿⣿⣾⣿⣋⣤⡄⠀⠀⠀⠀⠀⠀⠀⠠⣈⠻⣿⣿⣿⣿⣿⡇⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠈⠉⠛⣦⣤⣤⣾⣿⣿⣿⣿⣿⣯⡴⠂⣀⡀⠀⡀⡀⡀⢠⣬⣻⣿⣿⣿⣿⡿⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⢀⣀⣀⣀⣀⣠⡴⠊⠉⠀⠈⢹⠿⣿⣿⣿⣿⣿⣷⣾⣿⠾⡿⡿⠿⣷⣦⣿⣿⣿⣿⣿⡟⠁⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠛⠷⠦⠤⠤⠴⠶⠶⠶⠶⠚⠉⠀⠀⠈⣉⣩⠽⠟⠋⠁⠀⠀⣁⣠⠿⠛⠋⠉⠉⠉⠁⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠉⠉⠉⠉⠉⠉⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ Oops! Something went wrong! You may want to report this to the Observium developers. count(): Argument #1 ($value) must be of type Countable|array, null given in /var/www/observium/includes/discovery/sensors/old-dnos-boxservices-private-mib.inc.php:14 Stack trace: #0: (unknown function) called at [/var/www/observium/includes/discovery/sensors/old-dnos-boxservices-private-mib.inc.php:14] 9: * @subpackage discovery 10: * @copyright (C) 2006-2013 Adam Armstrong, (C) 2013-2023 Observium Limited 11: * 12: */ 13: 14: if (count($valid['sensor']['temperature']['DNOS-BOXSERVICES-PRIVATE-MIB']) || 15: count($valid['sensor']['power']['DNOS-BOXSERVICES-PRIVATE-MIB'])) { 16: // Exit from discovery, since already added valid sensors by DNOS-BOXSERVICES-PRIVATE-MIB 17: // Note, DNOS-BOXSERVICES-PRIVATE-MIB and OLD-DNOS-BOXSERVICES-PRIVATE-MIB are crossed 18: echo 'Skipped by DNOS-BOXSERVICES-PRIVATE-MIB'; 19: return; #1: include called at [/var/www/observium/includes/include-dir-mib.inc.php:32] 27: 28: if (is_file($inc_file)) { 29: print_cli_data_field("$mib "); 30: 31: $inc_start = microtime(TRUE); // MIB timing start 32: $inc_status = include($inc_file); 33: echo(PHP_EOL); 34: 35: if ($include_lib && is_file($inc_dir . '.lib.php')) { 36: // separated functions include, for exclude fatal redeclare errors 37: include_once($inc_dir . '.lib.php'); #2: include called at [/var/www/observium/includes/discovery/sensors.inc.php:52] 47: } 48: } 49: 50: // Run sensor discovery scripts (also discovers state sensors as status entities) 51: $include_dir = "includes/discovery/sensors"; 52: include($config['install_dir'] . "/includes/include-dir-mib.inc.php"); 53: 54: // Run status-specific discovery scripts 55: $include_dir = "includes/discovery/status"; 56: include($config['install_dir'] . "/includes/include-dir-mib.inc.php"); 57: #3: include called at [/var/www/observium/includes/discovery/functions.inc.php:870] 865: $GLOBALS['module_stats'][$module] = []; 866: $valid[$module] = []; 867: 868: print_cli_heading("Module Start: %R" . $module); 869: 870: include("includes/discovery/$module.inc.php"); 871: 872: $m_end = utime(); 873: $GLOBALS['module_stats'][$module]['time'] = round($m_end - $m_start, 4); 874: print_module_stats($device, $module); 875: echo(PHP_EOL); #4: discover_device called at [/var/www/observium/discovery.php:216] 211: 212: foreach (dbFetchRows("SELECT * FROM `devices` WHERE `disabled` = 0 $where ORDER BY `last_discovered_timetaken` ASC", $params) as $device) { 213: // Additional check if device SNMPable, because during 214: // discovery many devices (long time), the some device can be switched off 215: if ($options['h'] === 'new' || is_snmpable($device)) { 216: discover_device($device, $options); 217: } else { 218: $string = "Device '" . $device['hostname'] . "' skipped, because switched off during runtime discovery process."; 219: print_debug($string); 220: logfile($argv[0] . ": $string"); 221: } Cordialement, Florian Isolet AS42929 - FI1735-RIPE LIGNE DIRECTE 05 18 10 18 12 artefact-groupe.fr <https://www.artefact-groupe.fr> Les donnees et renseignements contenus dans ce message sont personnels, confidentiels et secrets. Toute publication, utilisation ou diffusion, meme partielle, doit etre autorisee. Si vous n'etes pas le bon destinataire, nous vous demandons de ne pas lire, copier, utiliser ou divulguer cette communication. Nous vous prions de notifier cette erreur a l'expediteur et d'effacer immediatement cette communication de votre systeme. Any data and information contained in this electronic mail is personal, confidential and secret. Any total or partial publication, use or distribution must be authorized. If you are not the right addressee, we ask you not to read, copy, use or disclose this communication. Please notify this error to the sender and erase at once this communication from your system.

3 3

cisco router tunnel interfaces
by Tony Guadagno 28 Nov '23

28 Nov '23

Hi, I just noticed that Observium does not seem to list GRE Tunnel interfaces on Cisco routers. Are one of these including Tunnel interfaces? How do I get tunnel interfaces polled? thanks [cid:image002.jpg@01DA2205.08A73E50] Tony Guadagno O +1 585 577 1003 C +1 585 703 6700 E tonyg(a)guadagnoconsulting.com<mailto:tonyg@guadagnoconsulting.com> [cid:image001.jpg@01D84DD6.FC9912E0]

2 3

is there an alert kill switch?
by Tony Guadagno 28 Nov '23

28 Nov '23

Hi, when my Microsoft servers patch monthly, they often reboot and that causes an alert that is unnecessary for me. Is there a way (maybe a script I could write) that would disable alerting? I am thinking about making a cron job that would run monthly (at the time I am patching) that would disable alerting...then maybe 2 hrs later, re-enable alerting. Is this possible? Tony Guadagno O +1 585 577 1003 C +1 585 703 6700 E tonyg(a)guadagnoconsulting.com<mailto:tonyg@guadagnoconsulting.com> [cid:image001.jpg@01D84DD6.FC9912E0]

4 7

Security Questions
by Wilkinson, Matthew 27 Nov '23

27 Nov '23

Hello, I am deploying Observium into a secured environment and I've a few questions. * What security measures are in place to protect subscription SVN branch? * Does SVN do any checksums or hashing of the code after it is checkout to the client to ensure no malicious attempts were made in transit? * Is there a contact name and email we can document in cases where we need to get direct support? * Is there a regular notification mechanism for updates to Observium? E.g. via the mailing list or blog post? In other words, how do we find out about new security patches? Thanks for any and all help. Matt

1 0

Recover dashboard and alerts
by Chris James 26 Nov '23

26 Nov '23

We recently had to rebuild our observium server. Of course we lost the custom dashboards and alerts. Everything in the old observium directory was backed off. Can we recover the dashboards and alerts from the old directory? Chris James Vessel Production Systems Manager Infrastructure & Support

2 2

snmp syslocation dynamic geolocation
by Chris James 26 Nov '23

26 Nov '23

Does anyone know a way of integrating dynamic positioning into snmp? Usually you put the location in to syslocation attribute in snmpd.conf file. We have vessels which move about and wondered if there was away of using dynamic positioning. We have plenty of GPS sources onboard so not a problem there. Chris James Vessel Production Systems Manager Infrastructure & Support Telephone: +44 1932 376000 Direct: +44 1932 376817 Mobile: +44 7768 480557 Email: chris.james(a)pgs.com<mailto:chris.james@pgs.com>

1 0

Graph is not showing for a recently added Arista DCS-7020SRG-24C2 Switch.
by Prasun Kumar Mitra (NOC) 24 Nov '23

24 Nov '23

Hello, I am using Subscription version of Observium for over 4 years collecting data on over 35 devices including switch, routers and servers, using it daily I have recently added a Arista switch where traffic graph is not showing [or not getting drawn] although i can see the realtime traffic graph and all other info collected by observium. i have tried removing and re adding it to observium but the graph didn't worked. Can anyone help me resolve this. Observium Version: 23.11.13173 (15th November 2023) Device/ Hardware: Arista DCS-7020SRG-24C2 Device Firmware: Arista EOS 4.30.3M Regards, Prasun Kumar Mitra System Admin Alliance NOC Alliance Broadband Services Pvt. Ltd. P-89,C.I.T Road, Kolkata-700014 [cid:d027dbdc-38bf-4029-89b9-c38dff80934c]

2 1

Teams webhook images green/red
by Ivo van Tulden 21 Nov '23

21 Nov '23

Dear members, We have a webhook link to Microsoft teams for alerting from Observium. This works except for the "green/red" icons for a new alert or a fixed alert. We get "🔥" and "✅" instead of the icon, we have seen this working once but can't get it the work anymore. Do you have a solution how we can fix this? Examples: 🔥[servername] [storage] Disk near full 90% ✅[servername] [storage] Disk near full 90% Met vriendelijke groet, Ivo van Tulden Technical Infrastructure Engineer - IT Department << Security is van ons allemaal >> **** DISCLAIMER: The information sent in or attached to this e-mail is for the addressee only. If this e-mail message is unclear please contact VLISCO by e-mail or telephone. Disclosure or reproduction of this information to a third party without prior agreement of VLISCO is not allowed. VLISCO does not accept any responsibility for the correct and complete interpretation of this e-mail nor for the time of its arrival. VLISCO cannot be held responsible for any claim resulting from negotiations and/or decisions made directly or indirectly based on information contained in this e-mail message. Vlisco Netherlands B.V. Binnen Parallelweg 27, 5701 PH, Helmond, The Netherlands. Chamber of commerce Eindhoven 50751492. Tel.: +31 (0)492 570922 Fax: +31 (0)492 570230 Visit our website: www.vlisco.com ****

4 3

help with a filter
by Arnoldo Vidal Bravo 20 Nov '23

20 Nov '23

Hi, When I look into a device (any brand), I can't view only ports down. [image: image.png] When I apply Hide UP, nothing happens, but Hide DOWN works fine -- Saluda cordialmente

1 0

OpenBSD uptime
by Bryan Fields 16 Nov '23

16 Nov '23

I've setup a couple hosts running openbsd and note that uptime as reported in observium (I'm on the latest stable 13154) is showing incorrectly. Last reboot is showing as Jan 1 1970 as well. Has anyone else seen this on OpenBSD? Thanks, -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net

4 9

WMI Polling shows only 3 services
by Scott Kohnert 16 Nov '23

16 Nov '23

First time posting and hopes that someone can assist. Been using Subscription version of Observium for over 10 years collecting data on over 150 server farm using it daily and have been asked to now add monitoring of Windows Services. I started to do this via Probes and SNMP checks but due to the shear volume of services and servers involved this would be a tedious process. I would like to use WMI to monitor Windows Services as it appears to poll faster. Unfortunately I ran into an issue where it only displays 3 services at a time. Windows Server has over 200 services by default, I don’t plan on monitoring all of them but at least a couple dozen. Using WMI would be a much easier way to setup alerts if I could get the full listing to appear, which is where I am needing help. Here is my setup to reproduce the issue (generalized information used for security) Follow the WMI setup in the help documentation for my UB 22.04 server Global Settings > Polling > WMI (turn on) Server discovered via SNMP Open Properties of Server and edit WMI information (per server polling only no global settings) WMI Hostname = nacn_ip_TCP:hostname.domain.local[sign] WMI Domain= domain WMI Username = username WMI Password = password After a couple of minutes, I get the results of only showing 3 services not a full list. AllJoyn Router Service Remote Desktop Service Themes I have tried this on multiple servers and the same 3 services appear each time. I began to look into the code and run the wmic query on the web server itself using the following query wmic -U “domain\username%password” //ncacn_ip_TCP:hostname.domain.local[sign] “select DisplayName, Name, State, Status from Win32_Service” It gave me the full listing results and from what I can see this is where the issue lies. CLASS: Win32_Service DisplayName|Name|State|Status AllJoyn Router Service|AJRouter|Stopped|OK Application Layer Gateway Service|ALG|Stopped|OK Application Identity|AppIDSvc|Stopped|OK … Telephony|tapisrv|Stopped|OK CLASS: Win32_TerminalService DisplayName|Name|State|Status Remote Desktop Services|TermService|Running|OK CLASS: Win32_Service DisplayName|Name|State|Status Themes|Themes|Running|OK Storage Tiers Management|TieringEngineService|Stopped|OK … The first item of the WMI services is the AllJoyn Router Service, then about halfway down the listing it produces a different CLASS:Win32_TerminalService and the headers. Then it has Remote Desktop Services and starts again with CLASS:Win32_Service and headers again, and the third entry to be displayed Themes. Looking through the code I think the issue resides in the /opt/observium/includes/wmi.inc.php code and the function wmi_parse. This is the function that is used (from what I can back trace) for performing the parsing of the WMI call and populating the database with the WMI entries. But when running the mysql query for the services listing it only shows these 3 listed and not all the services that the manual query performed on the server displays. I would like to ask if someone can look into the WMI process and check the coding to allow the WMIC query to populate ALL the service results in the web site. As a separate test I also went into the Global Settings > Discovery > WMI AutoDiscoveryOptions and added in several services manually (list of 10) not including the Remote Desktop Services and the results I get on the Windows Services tab show the Remote Desktop Services. So the 2nd CLASS that appears for this service appears to be causing the issue. Any help is appreacited.

2 2

Aruba Instant AP wireless info? (clients, etc)
by Wolf Noble 15 Nov '23

15 Nov '23

howdy all! does anyone else have the problem of seeing no wireless stats in observium from Aruba instant APs? [= The contents of this message have been written, read, processed, erased, sorted, sniffed, compressed, rewritten, misspelled, overcompensated, lost, found, and most importantly delivered entirely with recycled electrons =]

2 1

Re: observium Digest, Vol 160, Issue 8
by Luis Olavarrieta 14 Nov '23

14 Nov '23

Is there something to use with the api? This email is confidential and / or may contain inside information. If you are not the addressee or authorized to receive your emails, you must NOT use, copy, disclose or take any action based on this email or any other information herein, please notify the sender immediately by reply this email and delete this email and its attachments.Privacy note a: www.wynnmex.com Este correo electrónico es confidencial y/o puede contener información privilegiada. Si usted no es su destinatario o no es alguna persona autorizada por éste para recibir sus correos electrónicos, NO deberá utilizar, copiar, relevelar o tomar ninguna acción basada en este correo o cualquier otra información incluida en el, favor de notificar al remitente de inmediato mediante el envío de este correo y borrar a continuación totalmente este correo y sus anexos. Consulta nuestro aviso de privacidad en:www.wynnmex.com El 14/11/23, 10:47 a.m., "observium-request(a)lists.observium.org <mailto:observium-request@lists.observium.org>" <observium-request(a)lists.observium.org <mailto:observium-request@lists.observium.org>> escribió: Send observium mailing list submissions to observium(a)lists.observium.org <mailto:observium@lists.observium.org> To subscribe or unsubscribe via email, send a message with subject or body 'help' to observium-request(a)lists.observium.org <mailto:observium-request@lists.observium.org> You can reach the person managing the list at observium-owner(a)lists.observium.org <mailto:observium-owner@lists.observium.org> When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Re: reporting (Ahmed Rahal) ---------------------------------------------------------------------- Message: 1 Date: Tue, 14 Nov 2023 11:01:51 -0500 From: Ahmed Rahal <arahal(a)fibrenoire.ca <mailto:arahal@fibrenoire.ca>> Subject: [Observium] Re: reporting To: Observium <observium(a)lists.observium.org <mailto:observium@lists.observium.org>> Cc: "observium-request(a)lists.observium.org <mailto:observium-request@lists.observium.org>" <observium-request(a)lists.observium.org <mailto:observium-request@lists.observium.org>>, Luis Olavarrieta <luis.olavarrieta(a)wynnmex.com <mailto:luis.olavarrieta@wynnmex.com>> Message-ID: <CAHaNNBUL=BOdS=QK5nmW3BF4DHtpSiO+sjMSdVKWm01HNUER6Q(a)mail.gmail.com <mailto:QK5nmW3BF4DHtpSiO+sjMSdVKWm01HNUER6Q@mail.gmail.com>> Content-Type: multipart/related; boundary="0000000000005bc91f060a1ee823" Hi Luis, Observium does not produce reports, but the API can provide you with most of the things you need for reporting. HTH, Ahmed. Le ven. 10 nov. 2023, à 09 h 22, Luis Olavarrieta via observium < observium(a)lists.observium.org <mailto:observium@lists.observium.org>> a écrit : > Hi Team: > > > > Is there a way to generate / export info to generate a monthly report? > > > > > > > > > > [image: signature_3057771358] > > > > This email is confidential and / or may contain inside information. If you > are not the addressee or authorized to receive your emails, you must NOT > use, copy, disclose or take any action based on this email or any other > information herein, please notify the sender immediately by reply this > email and delete this email and its attachments.Privacy note a: > www.wynnmex.com > > > > Este correo electrónico es confidencial y/o puede contener información > privilegiada. Si usted no es su destinatario o no es alguna persona > autorizada por éste para recibir sus correos electrónicos, NO deberá > utilizar, copiar, relevelar o tomar ninguna acción basada en este correo o > cualquier otra información incluida en el, favor de notificar al remitente > de inmediato mediante el envío de este correo y borrar a continuación > totalmente este correo y sus anexos. Consulta nuestro aviso de privacidad > en:www.wynnmex.com > > > > > _______________________________________________ > observium mailing list -- observium(a)lists.observium.org <mailto:observium@lists.observium.org> > To unsubscribe send an email to observium-leave(a)lists.observium.org <mailto:observium-leave@lists.observium.org> > -- Ahmed Rahal Administrateur de Systèmes / Systems Administrator *Videotron/Fibrenoire* - www.fibrenoire.ca A: 612 Rue Saint-Jacques, Montréal, QC H3C 1E2 ahmed.rahal(a)videotron.com <mailto:ahmed.rahal@videotron.com> Twitter: @fibrenoire

1 0

reporting
by Luis Olavarrieta 14 Nov '23

14 Nov '23

Hi Team: Is there a way to generate / export info to generate a monthly report? This email is confidential and / or may contain inside information. If you are not the addressee or authorized to receive your emails, you must NOT use, copy, disclose or take any action based on this email or any other information herein, please notify the sender immediately by reply this email and delete this email and its attachments.Privacy note a: www.wynnmex.com Este correo electrónico es confidencial y/o puede contener información privilegiada. Si usted no es su destinatario o no es alguna persona autorizada por éste para recibir sus correos electrónicos, NO deberá utilizar, copiar, relevelar o tomar ninguna acción basada en este correo o cualquier otra información incluida en el, favor de notificar al remitente de inmediato mediante el envío de este correo y borrar a continuación totalmente este correo y sus anexos. Consulta nuestro aviso de privacidad en:www.wynnmex.com

2 1

rancid device discover
by Sébastien Gay 10 Nov '23

10 Nov '23

Hello, I'm trying to insert a Huawei MA5800 router into rancid. It doesn't even appear in the router.db file. Can anyone advise me on the following command: $config['rancid']['os_map']['huawei'] = 'huawei' Best regards to all Sébastien

2 1

can i disable getbulk for a specific device?
by Tony Guadagno 09 Nov '23

09 Nov '23

Hi, I have some devices who's manufacturer states they do not support getBulk. In these cases, can I disable getBulk for these specific devices? Thanks Tony

2 1

ASSITANCE NEEDED IN CREATING AN ALERT (OBSERVIUM) ||
by Sarfaraz 09 Nov '23

09 Nov '23

Dear Team, We require assistance in setting up an alert, We have encountered some difficulties in triggering alerts and would greatly appreciate your guidance on this matter. We would be grateful if you could provide us with step-by-step instructions or any necessary resources to help us successfully create and trigger this alert. Regards, Sarfaraz Technical Support Engineer Pulse Telesystems Pvt Ltd. <http://www.pulse.in/> www.pulse.in | <mailto:data@pulse.in> data(a)pulse.in Phone: +91 84284 22555 <https://in.linkedin.com/company/pulsetelesystems> <https://twitter.com/pulsetele?lang=en> <https://www.facebook.com/pulsetelesystems/> <https://www.instagram.com/pulsetelesystems/>

1 0

Traffic accounting not showing previous period
by Anthony Polselli 03 Nov '23

03 Nov '23

All of the sudden, when I look at traffic accounting for last month, it's blank. Current month has data though. Any way to get this back? Thanks, [cid:image001.png@01DA0CD8.6342C380] __________________________________________ Anthony Polselli Chief Technology Officer Natural Networks, Inc. 7047 Carroll Rd. San Diego, CA 92121 anthony(a)naturalnetworks.com<mailto:anthony@naturalnetworks.com> http://www.naturalnetworks.com<http://www.naturalnetworks.com/> (619) 222-3232, ext: 101 office [cid:image002.png@01DA0CD8.6342C380]

2 2

Questions about Observium Enterprise Support
by Johan Carlander 31 Oct '23

31 Oct '23

Hi, I’ve been trying to find more detailed info about Observium Enterprise Support, does anyone here has such an agreement and can share the details? All I can find on the web page says: “Included Enterprise-grade email & live support: Yes, 10 hours” So I take it that means that up to 10 hours of live support is included, what will be the cost per hour for support after those 10 hours? I cannot find any definition of what live support is, I would guess that it means some sort of online meeting with screen sharing but it would good to have it in writing so we know what to expect. Is there any SLA for response time for new support tickets, for example within 4 hours or Next Business day? Thanks in advance. BR, Johan Carlander Senior consultant Mobile: +46 733 300 700 Email: johan(a)drivenbydata.se<mailto:johan@drivenbydata.se> Driven By Data AB, Dalagatan 25, 113 24, Stockholm drivenbydata.se<http://drivenbydata.se/>

1 0

EqualLogics Volume Monitoring
by cwager＠communicationsmuseum.org.uk 31 Oct '23

31 Oct '23

Good Afternoon, I have been setting up Observium, which I am relatively new to, and am not sure how to monitor the volumes of the EqualLogic Storage Array, Observium has detected it and provided sensors for the Physical Disk, fan, Controllers, and so on but no volumes are picked up. According to the following link, there are MIBs for this. https://mibs.observium.org/mib/EQLVOLUME-MIB/ If I SNMPWALK the OID's then I get the expected data, would it be possible for someone to advise how I may go about getting this data to be shown in Observium itself? Thanks Chris

2 3

WMI monitoring
by Luis Olavarrieta 30 Oct '23

30 Oct '23

Team, i’ve been trying to add my servers with WMI with no success. Im running the query like this root@visum-fumpm:~# wmic -U [ad/]soporte%PASSWORD. //ad.fqdn.org "select * from Win32_ComputerSystem" and I get this error message: [librpc/rpc/dcerpc_connect.c:337:dcerpc_pipe_connect_ncacn_ip_tcp_recv()] failed NT status (c00000b5) in dcerpc_pipe_connect_ncacn_ip_tcp_recv [librpc/rpc/dcerpc_connect.c:828:dcerpc_pipe_connect_b_recv()] failed NT status (c00000b5) in dcerpc_pipe_connect_b_recv [wmi/wmic.c:196:main()] ERROR: Login to remote object. NTSTATUS: NT_STATUS_IO_TIMEOUT - NT_STATUS_IO_TIMEOUT So I cant add it to my observium server with this configuration in the config.php file: $config['wmi']['domain'] = "ad.fqdn.org"; $config['wmi']['user'] = "soporte"; $config['wmi']['pass'] = "PASSWORD"; $config['poller_modules']['wmi'] = 1; I have tried with this “soporte” account and also directly with the administrator account with no success, same error message. Please advice. This email is confidential and / or may contain inside information. If you are not the addressee or authorized to receive your emails, you must NOT use, copy, disclose or take any action based on this email or any other information herein, please notify the sender immediately by reply this email and delete this email and its attachments.Privacy note a: www.wynnmex.com Este correo electrónico es confidencial y/o puede contener información privilegiada. Si usted no es su destinatario o no es alguna persona autorizada por éste para recibir sus correos electrónicos, NO deberá utilizar, copiar, relevelar o tomar ninguna acción basada en este correo o cualquier otra información incluida en el, favor de notificar al remitente de inmediato mediante el envío de este correo y borrar a continuación totalmente este correo y sus anexos. Consulta nuestro aviso de privacidad en:www.wynnmex.com

1 0

Call to undefined function generate_device_link()
by diowitt＠live.com 27 Oct '23

27 Oct '23

Hello! After I upgraded the observium CE, I did check errors and showed me this message: root@ctpge02:/opt/observium# ./check-errors.php ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣀⡀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣠⡶⠋⠁⠙⣦⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⣠⡶⠛⠛⠲⣤⣀⠀⠀⠀⠀⡀⠀⠀⠀⠀⠀⠀⠀⣠⠄⣠⣾⣡⠀⠀⠀⠀⠸⡆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⢰⡏⠀⠀⠀⠀⠈⣿⣷⣤⡐⣄⣽⡾⠧⠤⠤⣤⣤⣾⣿⣾⣿⣯⣀⡀⠀⠀⠀⢠⡇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⢷⡀⠀⠀⠀⠀⣿⣿⣿⣿⣿⣯⣤⣤⡀⣠⣈⣹⣽⣿⣿⣿⣿⣷⣦⣄⠀⢀⡾⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠈⠻⣆⠀⠀⠀⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡟⠀⣠⠞⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠈⢳⣆⠘⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣧⣾⣷⣶⣤⣀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⣘⣿⣿⣿⣿⣿⣟⣿⣿⣿⣿⣿⣿⣿⣿⢡⡼⣿⣿⣿⣿⣿⣿⣿⣿⣿⣷⣄⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⣾⣿⣿⣿⣿⣿⡏⣯⡇⣿⣿⣿⡏⣿⣿⣿⣜⣛⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡷⣄⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⣿⣿⣿⣿⣿⣿⣿⣭⣾⣿⣿⣿⣇⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡿⠃⠀⠘⢷⣄⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⢠⣿⣿⡏⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡏⢿⣿⣿⡿⠁⠀⠀⠀⠸⣿⣷⡀⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⢸⣿⣿⡇⠈⢻⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⠻⣿⣿⡟⢠⣿⣿⡟⠁⠀⠀⠀⠀⠙⣻⣿⣿⣆⠀⠀⠀⠀⠀ ⠀⠀⠀⠈⣿⣿⣷⡈⠛⠿⣿⣿⡆⠻⢿⣿⣽⣿⣯⣿⠿⠃⠀⠻⠛⣰⣿⣿⠏⠀⠀⠀⠀⢀⣙⣿⣿⣿⣿⣿⣧⡀⠀⠀⠀ ⠀⠀⠀⠀⢿⠈⠙⠻⠷⠤⠄⢉⡁⠀⠀⠙⢉⣵⣌⠀⠀⠀⣀⠄⠘⠛⠋⠁⢀⣀⣤⣤⣭⣭⣽⣿⣿⣿⣿⣿⣿⣷⡀⠀⠀ ⠀⠀⠀⢀⣿⡄⠀⠀⠀⠀⠀⠀⠉⠓⢦⣄⡉⠉⢉⣩⠶⠋⠁⠀⠀⠀⣠⣾⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣷⡀⠀ ⠀⠀⠀⣼⣿⣿⣷⣶⣶⣆⣀⡀⠀⠀⠀⠀⠉⠉⠉⠀⠀⠀⠀⠀⣠⣾⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣧⠀ ⠀⠀⠀⣿⣿⣿⣿⣿⣿⣿⣥⣄⡀⠀⠀⠀⠀⠀⠀⠀⠀⣸⣦⣾⣿⣿⣿⣿⣿⣿⡿⠿⠿⡟⠿⣿⣟⡿⢿⡛⠀⣘⣿⣿⡆ ⠀⠀⠀⢿⣿⣿⠿⠿⠿⠿⢿⣿⣿⣷⣿⡆⠀⠀⣶⣶⣾⡿⠛⠛⠛⠛⠻⣿⣿⣿⡟⠉⠀⠀⠀⠈⠁⠁⢀⢀⠲⣬⣿⣿⡇ ⠀⠀⠀⠘⡏⠳⣤⡄⠀⡄⠀⠀⠈⠙⢿⣧⠀⢀⣿⣿⠏⠀⠀⠀⠀⢀⣠⣿⣿⠋⠀⠀⠀⠀⠀⠀⠀⠀⠈⣯⣷⣿⣿⣿⡇ ⠀⠀⠀⠀⢿⠀⠀⠉⠳⣇⠀⠀⠀⠀⠀⢻⠀⢸⣿⣿⣆⢠⠀⡆⣰⡿⠟⠉⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⡾⣿⣿⣿⣿⣿⡇ ⠀⠀⠀⠀⠘⣧⠀⠀⠀⠹⣷⣤⣄⠀⡈⣾⡆⢸⡿⠋⠿⠾⠴⠷⠋⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⣠⠞⠉⣶⣾⣿⣿⣿⣿⠀ ⠀⠀⠀⠀⠀⠈⠳⣄⠀⠀⠀⠉⠻⣿⣿⣿⣇⠸⡷⠀⠀⠀⢀⣠⢄⣠⣶⣤⣤⣤⡤⠤⠖⠛⠉⠀⠠⣤⣼⣿⣿⣿⣿⡏⠀ ⠀⠀⠀⠀⠀⠀⠀⠉⢻⣷⠶⠒⠀⠀⠁⠈⢿⡄⣷⣆⣤⣶⡿⠛⠛⠛⠉⠉⠉⠁⠀⠀⠀⠀⠀⠀⠀⠈⢿⣿⣿⣿⣿⠇⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠘⣏⠀⠀⠀⠀⠀⠀⠘⣧⣿⣿⡿⢋⡤⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠰⣾⣿⣿⣿⣿⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⢻⡄⠀⠀⠀⠀⠀⠀⢸⣿⣿⣶⣫⠆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⡀⢦⣵⣿⣿⣿⣿⠇⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢻⣆⠀⠀⠀⠀⠀⠀⣿⣿⣿⠇⠀⣀⠀⠀⠀⠀⠀⠀⠀⠀⠳⠦⣴⣿⣶⣿⣿⣿⣿⡿⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠛⢷⣄⠀⠀⠀⠀⢹⣿⣿⣾⣿⣋⣤⡄⠀⠀⠀⠀⠀⠀⠀⠠⣈⠻⣿⣿⣿⣿⣿⡇⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠈⠉⠛⣦⣤⣤⣾⣿⣿⣿⣿⣿⣯⡴⠂⣀⡀⠀⡀⡀⡀⢠⣬⣻⣿⣿⣿⣿⡿⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⢀⣀⣀⣀⣀⣠⡴⠊⠉⠀⠈⢹⠿⣿⣿⣿⣿⣿⣷⣾⣿⠾⡿⡿⠿⣷⣦⣿⣿⣿⣿⣿⡟⠁⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠛⠷⠦⠤⠤⠴⠶⠶⠶⠶⠚⠉⠀⠀⠈⣉⣩⠽⠟⠋⠁⠀⠀⣁⣠⠿⠛⠋⠉⠉⠉⠁⠀⠀⠀⠀⠀⠀ ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠉⠉⠉⠉⠉⠉⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ Oops! Something went wrong! You may want to report this to the Observium developers. Call to undefined function generate_device_link() in /opt/observium/check-errors.php:36 Stack trace: #0: (unknown function) called at [/opt/observium/check-errors.php:36] 31: $errored = 0; 32: 33: foreach (dbFetchRows("SELECT * FROM `ports` AS I, `devices` AS D WHERE I.device_id = D.device_id $where", $params) as $interface) { 34: $errors = $interface['ifInErrors_delta'] + $interface['ifOutErrors_delta']; 35: if ($errors > '1') { 36: $errored[] = generate_device_link($interface, $interface['hostname'] . " - " . $interface['ifDescr'] . " - " . $interface['ifAlias'] . " - " . $interface['ifInErrors_delta'] . " - " . $interface['ifOutErrors_delta']); root@ctpge02:/opt/observium# root@ctpge02:/opt/observium# 39: $i++; 40: } 41: There's something that I need to do? Tks!

2 2

Poller separator affected by service name
by support＠vechelde.de 26 Oct '23

26 Oct '23

Hi, I have a problem with the wmic module: CMD[/bin/wmic --user=*** --password=*** --delimiter='##' --namespace='root\CIMV2' //'Host' "SELECT DisplayName,Name,StartMode,State FROM Win32_Service"] I get this Situation: CMD EXITCODE[0] CMD RUNTIME[4.8128s] STDOUT[ CLASS: Win32_Service DisplayName##Name##StartMode##State (Other services...) Interne Windows-Datenbank##MSSQL$MICROSOFT##WID##Auto##Running (Other services...) ] PHP Fatal error: Uncaught ValueError: array_combine(): Argument #1 ($keys) and argument #2 ($values) must have the same number of elements in /opt/observium/includes/wmi.inc.php:140 Stack trace: #0 /opt/observium/includes/wmi.inc.php(140): array_combine() #1 /opt/observium/includes/wmi.inc.php(15): wmi_parse() #2 /opt/observium/includes/polling/wmi.inc.php(235): wmi_get() #3 /opt/observium/includes/polling/functions.inc.php(306): include('...') #4 /opt/observium/poller.php(171): poll_device() #5 {main} thrown in /opt/observium/includes/wmi.inc.php on line 140 The Service "MSSQL$MICROSOFT##WID" includes the delimiter '##' so the array has 4 Keys but this row got 5 values due to the servicename... Is there a way to change the delimiter or ignore this service?

1 0

Raisecom ISCOM ISCOM5508-GPSC(C)_ROAP_2.64.SP2.1_20211213
by rhett.zeeman＠ttconnect.co.za 26 Oct '23

26 Oct '23

Hi Team, we are trying to monitor the above device. This works well. Observium can even monitor the GPON PON interfaces eg: gpon-olt1/1. The problem we are having is trying the monitor the ONU devices on site at a client. We use Raisecom ONU's. There are currently mib files available but we noticed that the mib files are empty. So it would seem that Observium cant monitor the bandwidth of the onu's behind the splitter that is connected to the pon interface. Is this something we can manually do from our side? if we have a look at the mib files in /opt/observium/mib/raisecom and vi into the mib file, it is populated. [root@localhost raisecom]# vi RAISECOM-SYSTEM-MIB -- MibName=raisecomSystem -- ======================================================================= -- Version info -- -- Version 0.1 Created 2003.12.17 by GONGGUIDONG -- This version of MIB is created just for the use of Network Management Systems -- display the memory and cpu. -- -- Copyright(c) 2002-2005 by RAISECOM TECH, Ltd. -- modify history -- 02, 20130809, guokai, modify raisecomVoltIndex -- 01, 20090915, qiyun, Add CPU monitor MIBs. -- -- ======================================================================= RAISECOM-SYSTEM-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY,Unsigned32 FROM SNMPv2-SMI OBJECT-TYPE FROM SNMPv2-SMI raisecomAgent FROM RAISECOM-BASE-MIB TruthValue FROM SNMPv2-TC EnableVar FROM SWITCH-TC TimeStamp,TEXTUAL-CONVENTION FROM SNMPv2-TC; raisecomSystem MODULE-IDENTITY LAST-UPDATED "200507270000Z" ORGANIZATION "RAISECOM TECH, Ltd." CONTACT-INFO "www.raisecom.com" DESCRIPTION "raisecom System objects: objects common to all platforms." ::= { raisecomAgent 1 } -- -- Textual Conventions "RAISECOM-SYSTEM-MIB" [converted] 1550L, 59022C please advise on this as we need to be able to monitor the client bandwidth. Regards,.

2 1

Teams webhook debugging
by Ivo van Tulden 17 Oct '23

17 Oct '23

Dear members, After the great help with the dashboard I went of to the next part in automating, which is for us alerting through Teams. Hopefully you can help me as quickly with this as the last time. We want to use Teams Webhook function to create an alert message, which holds a couple of components. I have configured the webhook within MS Teams and setup the link with the Observium contacts. Created a alert which triggers and mentions the notification of contacts, but nothing happens within MS Teams. The problem can be with a couple of things, so I wanted to start with logging with Observium. This can probably show me if the firewall blocks, if the Webhook link was a bad URL, etc. Where can I find a debugging log of the notification actions, so I can start debugging? Met vriendelijke groet, Ivo van Tulden Technical Infrastructure Engineer - IT Department << Security is van ons allemaal >> **** DISCLAIMER: The information sent in or attached to this e-mail is for the addressee only. If this e-mail message is unclear please contact VLISCO by e-mail or telephone. Disclosure or reproduction of this information to a third party without prior agreement of VLISCO is not allowed. VLISCO does not accept any responsibility for the correct and complete interpretation of this e-mail nor for the time of its arrival. VLISCO cannot be held responsible for any claim resulting from negotiations and/or decisions made directly or indirectly based on information contained in this e-mail message. Vlisco Netherlands B.V. Binnen Parallelweg 27, 5701 PH, Helmond, The Netherlands. Chamber of commerce Eindhoven 50751492. Tel.: +31 (0)492 570922 Fax: +31 (0)492 570230 Visit our website: www.vlisco.com ****

2 2

Fwd: Juniper MX104 doesn't like load average graph
by David Beveridge 16 Oct '23

16 Oct '23

Last week I upgraded a server to Observium 23.10.13043 (stable) In Polling information I had a huge increase in system polling, (See attached images.) I backed out the upgrade and tried it again a few days later, when I had more time to investigate. In addition the processor graph had changed, showing much higher CPU usage I also noticed a new graph called Load Averages defined here... # svn blame /opt/observium/includes/definitions/mibs/juniper.inc.php 13020 adama // JUNIPER-MIB::jnxOperatingDescr.9.1.0.0 = STRING: Routing Engine 0 13020 adama // JUNIPER-MIB::jnxOperatingDescr.9.2.0.0 = STRING: Routing Engine 1 13020 adama // JUNIPER-MIB::jnxOperatingState.9.1.0.0 = INTEGER: running(2) 13020 adama // JUNIPER-MIB::jnxOperatingState.9.2.0.0 = INTEGER: standby(7) 13020 adama // JUNIPER-MIB::jnxOperating1MinLoadAvg.9.1.0.0 = Gauge32: 123 13020 adama // JUNIPER-MIB::jnxOperating1MinLoadAvg.9.2.0.0 = Gauge32: 8 13020 adama // JUNIPER-MIB::jnxOperating5MinLoadAvg.9.1.0.0 = Gauge32: 56 13020 adama // JUNIPER-MIB::jnxOperating5MinLoadAvg.9.2.0.0 = Gauge32: 5 13020 adama // JUNIPER-MIB::jnxOperating15MinLoadAvg.9.1.0.0 = Gauge32: 27 13020 adama // JUNIPER-MIB::jnxOperating15MinLoadAvg.9.2.0.0 = Gauge32: 0 13020 adama $config['mibs'][$mib]['la'] = [ 13020 adama 'type' => 'table', // In table mode get first entry with test condition 13020 adama 'scale' => 0.01, 13020 adama // Walks 13020 adama 'oid_extra' => 'jnxOperatingState.9', 13020 adama 'oid_1min' => 'jnxOperating1MinLoadAvg.9', 13020 adama 'oid_5min' => 'jnxOperating5MinLoadAvg.9', 13020 adama 'oid_15min' => 'jnxOperating15MinLoadAvg.9', 13020 adama 'test' => [ 'field' => 'jnxOperatingState', 'operator' => 'eq', 'value' => 'running' ], 13020 adama ]; 13020 adama I added unset($config['mibs'][$mib]['la']); // dave did this This has fixed the problem, I don't need the la graph anyway. I had tried to add this to confg.php, but that didn't work. I'm concerned that modifying the juniper.inc.php is not a good idea. Is there a better way to disable this?

2 1

consolidated availability graph
by Erwin Botas 14 Oct '23

14 Oct '23

Hello List, Willing to know if is possible to construct a consolidated device availability for several host “clusters” and have a % not host by host as were are committed to a service SLA Any suggestions welcome. Regards, Something to resume this hosts for example and the leyend able to show the calculation for the group of hosts. [cid:e14e30a7-4c52-4402-a29f-31fc9aabf7da@namprd10.prod.outlook.com] Erwin Botas Administrador de infraestructura senior • +506 2010-5000 • +506 2010-5050 • +506 8982-4885 • San José, CR • www.electrotecnica.com [https://www.electrotecnica.com/signature/bar2018CR.png] NOTA DE CONFIDENCIALIDAD: "La información contenida en este mensaje y sus adjuntos es estrictamente confidencial y se dirige exclusivamente a su destinatario. Si usted no es el destinatario indicado, cualquier divulgación, copia, distribución o uso del contenido de este documento es prohibido y será sancionado de acuerdo con la ley. Si recibió este mensaje por error, debe notificarlo de inmediato al remitente y destruirlo".

1 0

Add sensor data to dashboard
by Ivo van Tulden 14 Oct '23

14 Oct '23

Goodmorning, Please be advised that we just got a license, so if this isn't the correct way to get the information, please advice me how to do better. Is there a possibility to add a graph of a device to the dashboard, so the live information of that sensor data is shown? The link to the graph is something like this: https://<servername>/graphs/to=1697179853/id=313/type=sensor_graph/from=1697093453/<https://%3cservername%3e/graphs/to=1697179853/id=313/type=sensor_graph/from=1697093453/> Met vriendelijke groet, Ivo van Tulden Technical Infrastructure Engineer - IT Department << Security is van ons allemaal >> **** DISCLAIMER: The information sent in or attached to this e-mail is for the addressee only. If this e-mail message is unclear please contact VLISCO by e-mail or telephone. Disclosure or reproduction of this information to a third party without prior agreement of VLISCO is not allowed. VLISCO does not accept any responsibility for the correct and complete interpretation of this e-mail nor for the time of its arrival. VLISCO cannot be held responsible for any claim resulting from negotiations and/or decisions made directly or indirectly based on information contained in this e-mail message. Vlisco Netherlands B.V. Binnen Parallelweg 27, 5701 PH, Helmond, The Netherlands. Chamber of commerce Eindhoven 50751492. Tel.: +31 (0)492 570922 Fax: +31 (0)492 570230 Visit our website: www.vlisco.com ****

3 4

Obtaining good thresholds for monitoring SFP light levels
by Corwin Ziegler Hunts 11 Oct '23

11 Oct '23

We would like to alert if an SFP's received light level is too low. The light level sensor data is present and linked with a specific port so we can adjust the alert checkers based on attributes of the linked port. What we haven't figured out how to do is get appropriate thresholds for alerting for each SFP. The SFPs define warning and alarm thresholds which are readable on the devices containing the SFPs but that data doesn't make it into Observium for most of our monitored devices as far as we can tell. Similar SFPs usually have similar thresholds so grouping by SFP vendor and part number then creating a check for each set of SFPs with manually extracted and entered thresholds could be acceptable. Observium does show the SFP vendor and part number on the device overview and inventory pages along with which port contains the SFP but there doesn't seem to be a way to reference this data when creating port or sensor groups or alert checkers. There are also the automatically generated or manually set thresholds for sensors inside Observium itself. The automatically generated thresholds are often missing and we are not aware of a way to ensure they are present or reasonable. Manually set thresholds could work if there was a way to set and audit those thresholds in an automated fashion. We don't see a way to use the API to do this though (we're using the subscription edition). Are there recommendations on how to achieve this? Is this a solved problem and we're running into a bug? This is feeling more difficult than it should be. Corwin

1 0

device_rebooted metric is now NULL instead of 1
by Corwin Ziegler Hunts 10 Oct '23

10 Oct '23

We have an alert checker using the device_rebooted metric to monitor for reboots. The metric used to read as 1 when a reboot was detected as is documented <https://docs.observium.org/entities/#device>. After updating to the latest stable revision (r13020) from r12520 the metric now reads as NULL immediately after a reboot. Is this change in behavior intended? Corwin

2 1

repeated recovery messages
by andregeissler＠posteo.de 09 Oct '23

09 Oct '23

Hi I get new recovery messages for my pandacom devices (pandacom-sc) all the time. Observium does not show any alerts. For a device that has not reported any event at all since October 5, Observium shows hundreds of recoveries today alone. Any tips on how to debug this would be greatly appreciated. Andre

1 2

physical v/s virtual
by Arnoldo Vidal Bravo 05 Oct '23

05 Oct '23

Hi, we have observium installed and working fine (polling 629 devices). It is currently installed on a physical server. How advisable is it to promote it to a virtual server? -- Saluda cordialmente

3 3

CustomOID Draw Error
by amat＠tvfactory.ch 05 Oct '23

05 Oct '23

Good Morning, We're having trouble with observium and "Custom OID" SNMP retrieval. The Huawei (S6730 V200R019C00SPC500) monitors portspeed and other. However, we are trying to get some Custom OID for hwAvgDuty5min refelecting the Average 5 Min CPU usage. (A) SNMP Walk On the same machine that Observium is installed the snmpwalk returns a value that makes sense administrator@m01:/opt/observium/html/weathermap/configs$ snmpwalk -v2c -c community-hidden 151.252.33.12 1.3.6.1.4.1.2011.6.3.4.1.4 SNMPv2-SMI::enterprises.2011.6.3.4.1.4.0.0.0 = INTEGER: 9 (B) Observium - Configure Custom OID Numeric OID 1.3.6.1.4.1.2011.6.3.4.1.4 we also tried Numeric OID 1.3.6.1.4.1.2011.6.3.4.1.4.0.0.0 Text OID hwAvgDuty5min Value Type GAUGE Description Average CPU Usage Display Unit cpu-usage Display Symbol % Kibibyte (1024) no Log Y Axis no Audo-discovery Yes Unfortunately it does return a "Draw Error". If we do open the CustomOID Graph we see Error: Openeing '': No such file or directory. Any idea what goes wrong here? Kind Regards Ramon Amat

1 0

RouterOS v7 BGPv4 SNMP
by Bergen, Ryan 04 Oct '23

04 Oct '23

Hello, does anyone know if observium can retrieve BGP peering info via SNMP with RouterOS 7.10+? It is now supported on Mikrotiks side, I am able to see the info via snmpwalk with OID 1.3.6.1.2.1.15.3.1 [cid:image003.png@01D9F6A7.A13EF790] [cid:image002.png@01D9F6A7.3CD825B0] Ryan Bergen Network Lead HyLife Ltd 5 Fabas Street, Box 100 La Broquerie, MB R0A 0W0 p 204-424-2300 x472 hylife.com<https://hylife.com/> • Ryan.Bergen(a)Hylife.com<mailto:Ryan.Bergen@Hylife.com> [cid3813500305*image001.png(a)01D93182.760726F0]

2 1

Adjust values returned for custom OID
by Ronald Voermans 04 Oct '23

04 Oct '23

Hi Adam, Did you manage to implement this ‘math parser’ feature for custom oid’s?

1 0

Devices with multiple IP addresses
by Sanjeev Gupta 01 Oct '23

01 Oct '23

Hi, Thanks Adam, I am back to using Observium after many years (was on the Subscription, now on Community).. I have a question on a router (and some similar devices). The router has two interfaces, both visible from the Observium poller. It has been discovered twice, and appears twice as well on the map. I cannot find a script, or anything in the UI (which I am still exploring) or the FAQ. What should I be looking for? -- Sanjeev Gupta +65 98551208 http://sg.linkedin.com/in/ghane

3 3

Observium working very slow
by sagar＠nstplnet.com 29 Sep '23

29 Sep '23

Hi Team, I recently updated to new version to observium after that it will be worked for 4-5 days everything fine. But yesterday onwards it will be unable to generate the graph properly. I have checked my side. is there anyone have issue of this. thank you in advance. -- Thanks & Regards Sagar Penti 7977783978 Navkar Supertech Pvt Ltd

3 7

Edit Network Map
by sagar＠nstplnet.com 27 Sep '23

27 Sep '23

Hi Team, Anyone knows the how to edit network map to add manually devices to monitor the network. -- Thanks & Regards Sagar Penti 7977783978 Navkar Supertech Pvt Ltd

3 2

database structure
by luis.olavarrieta＠wynnmex.com 27 Sep '23

27 Sep '23

dear team: is there any documentation about the structure of the database where the info is located? we are about to create a dashboard with Grafana and we will connect Observium to it. Having the database structure will make our live easier!!! and if it matters, this is from a "licenced account". Please advice --

1 0

sorry if this is a dumb question, but how do i read traffic graphs???
by Tony Guadagno 27 Sep '23

27 Sep '23

Hi, after several years of using Observium, it just occurred to me recently that I am not sure how to read the traffic graphs. For example, I always thought that above "0" on the horizontal axis was transmit and below was receive. But as I look closer, that cannot be. Also, the colors on the graph do not seem to line up with the legend...for example in this graph, I see 4 colors, light/dark green and light/dark purple. But the legend seems to have the same color for g0/0/0 as g0. I guess my questions are: How are transmits and receives represented on the traffic graphs? Why are the colors in the graph not lining up with the legend? What does negative 100M represent? thanks [cid:image004.jpg@01D9F11E.FB948DB0] Tony Guadagno O +1 585 577 1003 C +1 585 703 6700 E tonyg(a)guadagnoconsulting.com<mailto:tonyg@guadagnoconsulting.com> [cid:image001.jpg@01D84DD6.FC9912E0]

3 11

Device Showing Down in Alerts but Device is online
by sagar＠nstplnet.com 27 Sep '23

27 Sep '23

Hi Team, We have problem with device alerts. Due to this we can't monitor our network. Actually, our devices are online but, in the alerts, it will be showing down. I have tried to forceful discover but still same. I think it will be software bug then i will update to latest version but at here also same issue. If anyone have solution, please let me know. Thanks in advance. -- Thanks & Regards Sagar Penti 7977783978 Navkar Supertech Pvt Ltd

3 13

please add export device list feature
by Tony Guadagno 21 Sep '23

21 Sep '23

Hi, I just put this feature request in. if anyone else thinks this would be useful, please reply. Thanks [OBS-4616] please add the ability to export device lists and info - Observium<https://jira.observium.org/browse/OBS-4616> Tony

3 3

Unable to send Telegram notifications
by sagar＠nstplnet.com 20 Sep '23

20 Sep '23

Hi Team, We are facing device up down status will be not sending telegrams. As we are seeing device is up but, in the alerts, it will be not showing up showing status failed. I think issue with my switch, but it is up & working with LibreNMS properly. Anyone knows what the issue of it is. Version: 23.1.12493 -- Thanks & Regards Sagar Penti 7977783978 Navkar Supertech Pvt Ltd

2 4

Observium Community Edition 23.09
by Adam Armstrong 20 Sep '23

20 Sep '23

We've just released Observium Community Edition 23.09, based on r13005. It includes ~558 commits since the last release. Please note that this release breaks compatibility with PHP versions below 7.2. https://docs.observium.org/updating/#upgrade-to-latest-major-release

1 0

Portchannels not found in Observium
by Peter Derissen 14 Sep '23

14 Sep '23

Hi, I have just added 4 new devices (of a new typ) in Observium. But the discovery is not seeing the portchannels. Anyway this could be added? 1. Running Observium Pro revision 12988. 2. Device type = ADVA FSP150-XG312 OptiSwitch XG312-F-EXT Ports of the Adva: LIE1013.AGG1# sh port description PORT DESCRIPTION ====================================================== 1 *** CPE Interface Currently unused *** 2 *** CPE Interface Currently unused *** 3 *** CPE Interface Currently unused *** 4 *** CPE Interface Currently unused *** 5 *** CPE Interface Currently unused *** 6 *** CPE Interface Currently unused *** 7 *** CPE Interface Currently unused *** 8 *** CPE Interface Currently unused *** 9 *** CPE Interface Currently unused *** 10 *** CPE Interface Currently unused *** 11 *** CPE Interface Currently unused *** 12 *** CPE Interface Currently unused *** 13 *** CPE Interface Currently unused *** 14 *** CPE Interface Currently unused *** 15 *** CPE Interface Currently unused *** 16 *** CPE Interface Currently unused *** 17 *** CPE Interface Currently unused *** 18 *** CPE Interface Currently unused *** 19 *** CPE Interface Currently unused *** 20 *** CPE Interface Currently unused *** 21 *** CPE Interface Currently unused *** 22 *** CPE Interface Currently unused *** 23 *** CPE Interface Currently unused *** 24 *** CPE Interface Currently unused *** 25 *** CPE Interface Currently unused *** 26 *** CPE Interface Currently unused *** 27 *** CPE Interface Currently unused *** 28 *** CPE Interface Currently unused *** 29 *** CPE Interface Currently unused *** 30 *** CPE Interface Currently unused *** 31 *** CPE Interface Currently unused *** 32 *** CPE Interface Currently unused *** 33 *** CPE Interface Currently unused *** 34 *** CPE Interface Currently unused *** 35 *** CPE Interface Currently unused *** 36 *** CPE Interface Currently unused *** 37 *** CPE Interface Currently unused *** 38 *** CPE Interface Currently unused *** 39 *** CPE Interface Currently unused *** 40 *** CPE Interface Currently unused *** 41 R362: *** Connected to PE2.LIE1013 - xe-0/1/4 *** 42 R362: *** Connected to PE2.LIE1013 - xe-0/1/5 *** 43 *** Connected to PE2.LIE1013 - NOT in USE *** 44 *** Connected to PE2.LIE1013 - NOT in USE *** 45 R362: *** Connected to VRV1031.AGG1 - Port 49 *** 46 *** Connected to VRV1031.AGG1 - NOT in USE *** 47 *** Connected to VRV1031.AGG1 - NOT in USE *** 48 *** Connected to VRV1031.AGG1 - NOT in USE *** 49 R362: *** Connected to VIS1014.AGG1 - Port 45 *** 50 *** Connected to VIS1014.AGG1 - NOT in USE *** 51 *** Connected to VIS1014.AGG1 - NOT in USE *** 52 *** Connected to VIS1014.AGG1 - NOT in USE *** t1 R362: *** Connected to VRV1031.AGG1 - LIE1013-VRV1031/0001 - t2 *** t2 R362: *** Connected to VIS1014.AGG1 - LIE1013-VIS1014/0001 - t1 *** t3 R362: *** Connected to PE2.LIE1013 - Ae 15 *** Ports found by discovery: o Discovering ports XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX..XX.XXX.XXX +---------+--------------------------+--------+----------------------+----------------+-------------+---------+ | ifIndex | ifDescr | ifName | ifAlias | ifType | Oper Status | Ignored | +---------+--------------------------+--------+----------------------+----------------+-------------+---------+ | 1 | Port 1 - ETH10/100/1000 | 1 | *** CPE Interface... | ethernetCsmacd | down | yes | | 2 | Port 2 - ETH10/100/1000 | 2 | *** CPE Interface... | ethernetCsmacd | down | yes | | 3 | Port 3 - ETH10/100/1000 | 3 | *** CPE Interface... | ethernetCsmacd | down | yes | | 4 | Port 4 - ETH10/100/1000 | 4 | *** CPE Interface... | ethernetCsmacd | down | yes | | 5 | Port 5 - ETH10/100/1000 | 5 | *** CPE Interface... | ethernetCsmacd | down | yes | | 6 | Port 6 - ETH10/100/1000 | 6 | *** CPE Interface... | ethernetCsmacd | down | yes | | 7 | Port 7 - ETH10/100/1000 | 7 | *** CPE Interface... | ethernetCsmacd | down | yes | | 8 | Port 8 - ETH10/100/1000 | 8 | *** CPE Interface... | ethernetCsmacd | down | yes | | 9 | Port 9 - ETH10/100/1000 | 9 | *** CPE Interface... | ethernetCsmacd | down | yes | | 10 | Port 10 - ETH10/100/1000 | 10 | *** CPE Interface... | ethernetCsmacd | down | yes | | 11 | Port 11 - ETH10/100/1000 | 11 | *** CPE Interface... | ethernetCsmacd | down | yes | | 12 | Port 12 - ETH10/100/1000 | 12 | *** CPE Interface... | ethernetCsmacd | down | yes | | 13 | Port 13 - ETH10/100/1000 | 13 | *** CPE Interface... | ethernetCsmacd | down | yes | | 14 | Port 14 - ETH10/100/1000 | 14 | *** CPE Interface... | ethernetCsmacd | down | yes | | 15 | Port 15 - ETH10/100/1000 | 15 | *** CPE Interface... | ethernetCsmacd | down | yes | | 16 | Port 16 - ETH10/100/1000 | 16 | *** CPE Interface... | ethernetCsmacd | down | yes | | 17 | Port 17 - ETH10/100/1000 | 17 | *** CPE Interface... | ethernetCsmacd | down | yes | | 18 | Port 18 - ETH10/100/1000 | 18 | *** CPE Interface... | ethernetCsmacd | down | yes | | 19 | Port 19 - ETH10/100/1000 | 19 | *** CPE Interface... | ethernetCsmacd | down | yes | | 20 | Port 20 - ETH10/100/1000 | 20 | *** CPE Interface... | ethernetCsmacd | down | yes | | 21 | Port 21 - ETH10/100/1000 | 21 | *** CPE Interface... | ethernetCsmacd | down | yes | | 22 | Port 22 - ETH10/100/1000 | 22 | *** CPE Interface... | ethernetCsmacd | down | yes | | 23 | Port 23 - ETH10/100/1000 | 23 | *** CPE Interface... | ethernetCsmacd | down | yes | | 24 | Port 24 - ETH10/100/1000 | 24 | *** CPE Interface... | ethernetCsmacd | down | yes | | 25 | Port 25 - ETH10/100/1000 | 25 | *** CPE Interface... | ethernetCsmacd | down | yes | | 26 | Port 26 - ETH10/100/1000 | 26 | *** CPE Interface... | ethernetCsmacd | down | yes | | 27 | Port 27 - ETH10/100/1000 | 27 | *** CPE Interface... | ethernetCsmacd | down | yes | | 28 | Port 28 - ETH10/100/1000 | 28 | *** CPE Interface... | ethernetCsmacd | down | yes | | 29 | Port 29 - ETH10/100/1000 | 29 | *** CPE Interface... | ethernetCsmacd | down | yes | | 30 | Port 30 - ETH10/100/1000 | 30 | *** CPE Interface... | ethernetCsmacd | down | yes | | 31 | Port 31 - ETH10/100/1000 | 31 | *** CPE Interface... | ethernetCsmacd | down | yes | | 32 | Port 32 - ETH10/100/1000 | 32 | *** CPE Interface... | ethernetCsmacd | down | yes | | 33 | Port 33 - ETH10/100/1000 | 33 | *** CPE Interface... | ethernetCsmacd | down | yes | | 34 | Port 34 - ETH10/100/1000 | 34 | *** CPE Interface... | ethernetCsmacd | down | yes | | 35 | Port 35 - ETH10/100/1000 | 35 | *** CPE Interface... | ethernetCsmacd | down | yes | | 36 | Port 36 - ETH10/100/1000 | 36 | *** CPE Interface... | ethernetCsmacd | down | yes | | 37 | Port 37 - ETH10/100/1000 | 37 | *** CPE Interface... | ethernetCsmacd | down | yes | | 38 | Port 38 - ETH10/100/1000 | 38 | *** CPE Interface... | ethernetCsmacd | down | yes | | 39 | Port 39 - ETH10/100/1000 | 39 | *** CPE Interface... | ethernetCsmacd | down | yes | | 40 | Port 40 - ETH10/100/1000 | 40 | *** CPE Interface... | ethernetCsmacd | down | yes | | 41 | Port 41 - ETH1000/10000 | 41 | R362: *** Connect... | ethernetCsmacd | up | no | | 42 | Port 42 - ETH1000/10000 | 42 | R362: *** Connect... | ethernetCsmacd | up | no | | 43 | Port 43 - ETH1000/10000 | 43 | *** Connected to ... | ethernetCsmacd | down | yes | | 44 | Port 44 - ETH1000/10000 | 44 | *** Connected to ... | ethernetCsmacd | down | yes | | 45 | Port 45 - ETH1000/10000 | 45 | R362: *** Connect... | ethernetCsmacd | up | no | | 46 | Port 46 - ETH1000/10000 | 46 | *** Connected to ... | ethernetCsmacd | up | yes | | 47 | Port 47 - ETH1000/10000 | 47 | *** Connected to ... | ethernetCsmacd | down | yes | | 48 | Port 48 - ETH1000/10000 | 48 | *** Connected to ... | ethernetCsmacd | down | yes | | 49 | Port 49 - ETH1000/10000 | 49 | R362: *** Connect... | ethernetCsmacd | up | no | | 50 | Port 50 - ETH1000/10000 | 50 | *** Connected to ... | ethernetCsmacd | up | yes | | 51 | Port 51 - ETH1000/10000 | 51 | *** Connected to ... | ethernetCsmacd | down | yes | | 52 | Port 52 - ETH1000/10000 | 52 | *** Connected to ... | ethernetCsmacd | down | yes | +---------+--------------------------+--------+----------------------+----------------+-------------+---------+ Kind regards, Met vriendelijke groet, Peter Derissen Safariweg 25-31 Sr. OSS & Data Engineer 3605 MA Maarssen +31 611587110 The Netherlands [Logo]<https://www.eurofiber.com/en-nl> [Linkedin]<https://nl.linkedin.com/company/eurofiber> [Twitter]<https://twitter.com/Eurofiber> [Web]<https://www.eurofiber.com/en-nl> [Web] Please consider the environment before printing [cid:image007.jpg@01D9E556.F0B14D80]<https://www.eurofiber.com/> ******** IMPORTANT NOTICE ******** This e-mail (including any attachments) may contain information that is confidential or otherwise protected from disclosure and it is intended only for the addressees. If you are not the intended recipient, please note that any copying, distribution or other use of information contained in this e-mail (and its attachments) is not allowed. If you have received this e-mail in error, kindly notify us immediately by telephone or e-mail and delete the message (including any attachments) from your system. Please note that e-mail messages may contain computer viruses or other defects, may not be accurately replicated on other systems, or may be subject of unauthorized interception or other interference without the knowledge of sender or recipient. Eurofiber only sends and receives e-mails on the basis that Eurofiber is not responsible for any such computer viruses, corruption or other interference or any consequences thereof. Eurofiber Nederland B.V. is registered in the Chamber of Commerce of Amsterdam with number 34134377, VAT number NL 8088.51.524 B01. Eurofiber N.V. has its registered office at Belgicastraat 5 bus 7, 1930 Zaventem and is registered under national number 0435.204.851. Eurofiber France has its registered office at 21 Avenue de la Créativité, 59650 Villeneuve d’Ascq and is registered under national number FR 83.822.249.074.

2 1

General Question - Raritan PDUs
by Derek Johnson 14 Sep '23

14 Sep '23

I'm curious if anyone on the listserv is using a Raritan monitored-per-port PDU? If so, would you be willing to share your experience monitoring it with Observium? We're looking at buying some monitored + switched per-port models, and I want to make sure we can graph each port individually like we can with other vendors. I assume we can, but I figured it can't hurt to ping the community to see if others have any experience they're willing to share to confirm/deny my assumption. Thank you for any info you can offer! Derek Johnson Manager of Network Operations Fort Hays State University 415 Lyman Dr., TH175, Hays, KS 67601 (785) 628-5688 | dpjohnson(a)fhsu.edu<mailto:dpjohnson@fhsu.edu>

2 1

Custom OID troubleshooting
by Brad Bendy 11 Sep '23

11 Sep '23

Got a custom OID setup and graphing for a single device, nothing is showing up in the graphs but snmpget verifies the OID is correct. I think the text OID might be incorrect. Is there a debug log for this somewhere? This is the Professional edition. Thanks

2 1