September 2023 - observium - lists.observium.org

Device first discovery date
by Attila Nagy 09 Oct '25

09 Oct '25

Hi Everyone! Is there a way to find out the date of the "first contact" with a device from Observium? I mean for example the date when the first discovery was run on a specific device, or something like this? (Currently the device's event log runs out after half a year.) Any ideas? Regards, Tylla

4 5

Send email alerts only for some checkers, not all of them
by Silvio del Val Hinojal 11 Apr '25

11 Apr '25

Hello, First of all, congratulations for your great product :) I have been searching this the forum but I can't find an answer for this :( We are currently using Observium Pro v18.10.9500. I'm trying to configure emailing so that I would like to be notified on some alerts generated by some of the alert checkers but not all of them, but I'm not able to do it :( Currently I'm receiving email alerts from all of my checkers. This is my current "config.php": // Set up a default alerter (email to a single address) // $config['email']['default'] = ""; // $config['email']['default_only'] = TRUE; $config['email']['from'] = "< I omit this part, this is our current email, this is working >"; $config['email']['smtp_host'] = "< I omit, our SMTP email server >"; $config['email']['backend'] = "smtp"; // Mail backend. Allowed: "mail" (PHP's built-in), "sendmail", "smtp". $config['email']['smtp_timeout'] = 30; We have only one contact with our destination email address and we have associated only 4 of 7 defined alert checkers, but we are currently receiving email notifications from all of them. Thank you very much [cid:image001.png@01D03B1C.E8E96F80]<http://www.pandasecurity.com/spain/> Silvio del Val Systems Engineer - Panda Security +34 944 343 728 silvio.delval(a)pandasecurity.com<mailto:silvio.delval@pandasecurity.com> pandasecurity.com<http://www.pandasecurity.com/> This e-mail contains confidential information owned by Panda Security. Any such copy, or use, or distribution or disclosure of its contents is strictly forbidden. Please notify us immediately at our phone number (+34 94 425 11 00) if you receive this e-mail and are not its consignee, and then delete this message from your system without copying it, distributing it, or disclosing its contents P Before printing this message, please make sure it is really necessary

5 9

User access levels
by Tibor Marchyn 06 Dec '24

06 Dec '24

Hi, I have another beginner question please. I have setup Active Directory authentication, but how can I limit users to exact devices? I really do not want for some users to see anything else than they need to and all of them have level 1 access. And I can't see any option to limit them or assign user to device. Also it would be great to assign users to exact device group I have created. Thanks a lot Tibor

2 2

How to add a device which only responds to ping/icmp?
by Thomas Stather 22 Aug '24

22 Aug '24

Hi How can i add a device which cannot (!) speak any snmp and only responds to ping/icmp requests? We have an Aruba wlan setup (Mobility Master and two Mobility Controllers) and i want to add the aps to Observium, so that they are monitored but only by ping/icmp. (The MM and the two MCs are already added to Observium, but i cannot see if one AP went offline or came back online again) The aps cannot speak any snmp when managed by the MM or MC, thats why it fails when i try to add one via ./add_device.php I appreciate any help :) Best, Thomas -- Thomas Stather IT Services VCP4, VCP6-DCV, VCP6.5-DCV Tel: +49 6221 486 628 Fax: +49 6221 486 561 Bevor Sie diese Mail ausdrucken, prüfen Sie bitte ob dies wirklich nötig ist. Umweltschutz geht uns alle an!

10 15

Missing some nice stats from Cisco 9800 that I got from Cisco 5520
by andri＠harpa.is 12 Aug '24

12 Aug '24

Hi Our organization recently upgraded from Cisco 5520 WLC to Cisco 9800 WLC. In observium I get really good statistics about wireless client count and wireless ap count on the 5520 but not on the 9800. I am not sure if this is something on observium side or cisco side. But I wanted to ask if anyone has the same issue and if they found a solution. Or maybe this is just something that needs to be added. Please let me know if there is any further information I can submit. Best regards Andri

4 6

Many devices shown as down(dns)
by Marios.P＠crowe.com.cy 19 Jul '24

19 Jul '24

Hello all, I can see in my observium installation that many devices changed their status to down(dns). This is a new installation and we migrated the configuration yesterday on a new server and devices were working properly. At around the same time (14:20:00) a lot of our machines changed their status to down. The message in the Event log is "Device status changed to Down (dns)". I tried to find what the problem may be but I can see SNMP are correct and dns records exist for the systems. Any ideas? Thank you, Marios

6 7

PowerDNS Recursive Server application
by Kevin Riahi 17 Jan '24

17 Jan '24

What is the process for support on applications for observium subscribers? In this case the PowerDNS Recursive Server application. Should we reach out to the original author. In this case the script is very simple and it seems it has no documented authors. The issue is the script is no longer working even though it was in the past. It may be because PowerDNS Recursive Server 4.8 has made permission changes to /var/run/pdns-recursor/pdns_recursor.controlsocket Testing the script /usr/lib/observium_agent/local/powerdns-recursor and it will execute with below error. <<<app-powerdns-recursor>>> Fatal: Unable to connect to remote '/var/run/pdns-recursor/pdns_recursor.controlsocket': Permission denied Here is the powerdns-recursor script . #!/bin/sh recctrl=`which rec_control` if [ $? -eq 0 ] then echo '<<<app-powerdns-recursor>>>' $recctrl get-all fi TIA Kevin

4 6

Observium working very slow
by sagar＠nstplnet.com 29 Sep '23

29 Sep '23

Hi Team, I recently updated to new version to observium after that it will be worked for 4-5 days everything fine. But yesterday onwards it will be unable to generate the graph properly. I have checked my side. is there anyone have issue of this. thank you in advance. -- Thanks & Regards Sagar Penti 7977783978 Navkar Supertech Pvt Ltd

3 7

Edit Network Map
by sagar＠nstplnet.com 27 Sep '23

27 Sep '23

Hi Team, Anyone knows the how to edit network map to add manually devices to monitor the network. -- Thanks & Regards Sagar Penti 7977783978 Navkar Supertech Pvt Ltd

3 2

database structure
by luis.olavarrieta＠wynnmex.com 27 Sep '23

27 Sep '23

dear team: is there any documentation about the structure of the database where the info is located? we are about to create a dashboard with Grafana and we will connect Observium to it. Having the database structure will make our live easier!!! and if it matters, this is from a "licenced account". Please advice --

1 0

sorry if this is a dumb question, but how do i read traffic graphs???
by Tony Guadagno 27 Sep '23

27 Sep '23

Hi, after several years of using Observium, it just occurred to me recently that I am not sure how to read the traffic graphs. For example, I always thought that above "0" on the horizontal axis was transmit and below was receive. But as I look closer, that cannot be. Also, the colors on the graph do not seem to line up with the legend...for example in this graph, I see 4 colors, light/dark green and light/dark purple. But the legend seems to have the same color for g0/0/0 as g0. I guess my questions are: How are transmits and receives represented on the traffic graphs? Why are the colors in the graph not lining up with the legend? What does negative 100M represent? thanks [cid:image004.jpg@01D9F11E.FB948DB0] Tony Guadagno O +1 585 577 1003 C +1 585 703 6700 E tonyg(a)guadagnoconsulting.com<mailto:tonyg@guadagnoconsulting.com> [cid:image001.jpg@01D84DD6.FC9912E0]

3 11

Device Showing Down in Alerts but Device is online
by sagar＠nstplnet.com 27 Sep '23

27 Sep '23

Hi Team, We have problem with device alerts. Due to this we can't monitor our network. Actually, our devices are online but, in the alerts, it will be showing down. I have tried to forceful discover but still same. I think it will be software bug then i will update to latest version but at here also same issue. If anyone have solution, please let me know. Thanks in advance. -- Thanks & Regards Sagar Penti 7977783978 Navkar Supertech Pvt Ltd

3 13

please add export device list feature
by Tony Guadagno 21 Sep '23

21 Sep '23

Hi, I just put this feature request in. if anyone else thinks this would be useful, please reply. Thanks [OBS-4616] please add the ability to export device lists and info - Observium<https://jira.observium.org/browse/OBS-4616> Tony

3 3

Unable to send Telegram notifications
by sagar＠nstplnet.com 20 Sep '23

20 Sep '23

Hi Team, We are facing device up down status will be not sending telegrams. As we are seeing device is up but, in the alerts, it will be not showing up showing status failed. I think issue with my switch, but it is up & working with LibreNMS properly. Anyone knows what the issue of it is. Version: 23.1.12493 -- Thanks & Regards Sagar Penti 7977783978 Navkar Supertech Pvt Ltd

2 4

Observium Community Edition 23.09
by Adam Armstrong 20 Sep '23

20 Sep '23

We've just released Observium Community Edition 23.09, based on r13005. It includes ~558 commits since the last release. Please note that this release breaks compatibility with PHP versions below 7.2. https://docs.observium.org/updating/#upgrade-to-latest-major-release

1 0

Portchannels not found in Observium
by Peter Derissen 14 Sep '23

14 Sep '23

Hi, I have just added 4 new devices (of a new typ) in Observium. But the discovery is not seeing the portchannels. Anyway this could be added? 1. Running Observium Pro revision 12988. 2. Device type = ADVA FSP150-XG312 OptiSwitch XG312-F-EXT Ports of the Adva: LIE1013.AGG1# sh port description PORT DESCRIPTION ====================================================== 1 *** CPE Interface Currently unused *** 2 *** CPE Interface Currently unused *** 3 *** CPE Interface Currently unused *** 4 *** CPE Interface Currently unused *** 5 *** CPE Interface Currently unused *** 6 *** CPE Interface Currently unused *** 7 *** CPE Interface Currently unused *** 8 *** CPE Interface Currently unused *** 9 *** CPE Interface Currently unused *** 10 *** CPE Interface Currently unused *** 11 *** CPE Interface Currently unused *** 12 *** CPE Interface Currently unused *** 13 *** CPE Interface Currently unused *** 14 *** CPE Interface Currently unused *** 15 *** CPE Interface Currently unused *** 16 *** CPE Interface Currently unused *** 17 *** CPE Interface Currently unused *** 18 *** CPE Interface Currently unused *** 19 *** CPE Interface Currently unused *** 20 *** CPE Interface Currently unused *** 21 *** CPE Interface Currently unused *** 22 *** CPE Interface Currently unused *** 23 *** CPE Interface Currently unused *** 24 *** CPE Interface Currently unused *** 25 *** CPE Interface Currently unused *** 26 *** CPE Interface Currently unused *** 27 *** CPE Interface Currently unused *** 28 *** CPE Interface Currently unused *** 29 *** CPE Interface Currently unused *** 30 *** CPE Interface Currently unused *** 31 *** CPE Interface Currently unused *** 32 *** CPE Interface Currently unused *** 33 *** CPE Interface Currently unused *** 34 *** CPE Interface Currently unused *** 35 *** CPE Interface Currently unused *** 36 *** CPE Interface Currently unused *** 37 *** CPE Interface Currently unused *** 38 *** CPE Interface Currently unused *** 39 *** CPE Interface Currently unused *** 40 *** CPE Interface Currently unused *** 41 R362: *** Connected to PE2.LIE1013 - xe-0/1/4 *** 42 R362: *** Connected to PE2.LIE1013 - xe-0/1/5 *** 43 *** Connected to PE2.LIE1013 - NOT in USE *** 44 *** Connected to PE2.LIE1013 - NOT in USE *** 45 R362: *** Connected to VRV1031.AGG1 - Port 49 *** 46 *** Connected to VRV1031.AGG1 - NOT in USE *** 47 *** Connected to VRV1031.AGG1 - NOT in USE *** 48 *** Connected to VRV1031.AGG1 - NOT in USE *** 49 R362: *** Connected to VIS1014.AGG1 - Port 45 *** 50 *** Connected to VIS1014.AGG1 - NOT in USE *** 51 *** Connected to VIS1014.AGG1 - NOT in USE *** 52 *** Connected to VIS1014.AGG1 - NOT in USE *** t1 R362: *** Connected to VRV1031.AGG1 - LIE1013-VRV1031/0001 - t2 *** t2 R362: *** Connected to VIS1014.AGG1 - LIE1013-VIS1014/0001 - t1 *** t3 R362: *** Connected to PE2.LIE1013 - Ae 15 *** Ports found by discovery: o Discovering ports XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX..XX.XXX.XXX +---------+--------------------------+--------+----------------------+----------------+-------------+---------+ | ifIndex | ifDescr | ifName | ifAlias | ifType | Oper Status | Ignored | +---------+--------------------------+--------+----------------------+----------------+-------------+---------+ | 1 | Port 1 - ETH10/100/1000 | 1 | *** CPE Interface... | ethernetCsmacd | down | yes | | 2 | Port 2 - ETH10/100/1000 | 2 | *** CPE Interface... | ethernetCsmacd | down | yes | | 3 | Port 3 - ETH10/100/1000 | 3 | *** CPE Interface... | ethernetCsmacd | down | yes | | 4 | Port 4 - ETH10/100/1000 | 4 | *** CPE Interface... | ethernetCsmacd | down | yes | | 5 | Port 5 - ETH10/100/1000 | 5 | *** CPE Interface... | ethernetCsmacd | down | yes | | 6 | Port 6 - ETH10/100/1000 | 6 | *** CPE Interface... | ethernetCsmacd | down | yes | | 7 | Port 7 - ETH10/100/1000 | 7 | *** CPE Interface... | ethernetCsmacd | down | yes | | 8 | Port 8 - ETH10/100/1000 | 8 | *** CPE Interface... | ethernetCsmacd | down | yes | | 9 | Port 9 - ETH10/100/1000 | 9 | *** CPE Interface... | ethernetCsmacd | down | yes | | 10 | Port 10 - ETH10/100/1000 | 10 | *** CPE Interface... | ethernetCsmacd | down | yes | | 11 | Port 11 - ETH10/100/1000 | 11 | *** CPE Interface... | ethernetCsmacd | down | yes | | 12 | Port 12 - ETH10/100/1000 | 12 | *** CPE Interface... | ethernetCsmacd | down | yes | | 13 | Port 13 - ETH10/100/1000 | 13 | *** CPE Interface... | ethernetCsmacd | down | yes | | 14 | Port 14 - ETH10/100/1000 | 14 | *** CPE Interface... | ethernetCsmacd | down | yes | | 15 | Port 15 - ETH10/100/1000 | 15 | *** CPE Interface... | ethernetCsmacd | down | yes | | 16 | Port 16 - ETH10/100/1000 | 16 | *** CPE Interface... | ethernetCsmacd | down | yes | | 17 | Port 17 - ETH10/100/1000 | 17 | *** CPE Interface... | ethernetCsmacd | down | yes | | 18 | Port 18 - ETH10/100/1000 | 18 | *** CPE Interface... | ethernetCsmacd | down | yes | | 19 | Port 19 - ETH10/100/1000 | 19 | *** CPE Interface... | ethernetCsmacd | down | yes | | 20 | Port 20 - ETH10/100/1000 | 20 | *** CPE Interface... | ethernetCsmacd | down | yes | | 21 | Port 21 - ETH10/100/1000 | 21 | *** CPE Interface... | ethernetCsmacd | down | yes | | 22 | Port 22 - ETH10/100/1000 | 22 | *** CPE Interface... | ethernetCsmacd | down | yes | | 23 | Port 23 - ETH10/100/1000 | 23 | *** CPE Interface... | ethernetCsmacd | down | yes | | 24 | Port 24 - ETH10/100/1000 | 24 | *** CPE Interface... | ethernetCsmacd | down | yes | | 25 | Port 25 - ETH10/100/1000 | 25 | *** CPE Interface... | ethernetCsmacd | down | yes | | 26 | Port 26 - ETH10/100/1000 | 26 | *** CPE Interface... | ethernetCsmacd | down | yes | | 27 | Port 27 - ETH10/100/1000 | 27 | *** CPE Interface... | ethernetCsmacd | down | yes | | 28 | Port 28 - ETH10/100/1000 | 28 | *** CPE Interface... | ethernetCsmacd | down | yes | | 29 | Port 29 - ETH10/100/1000 | 29 | *** CPE Interface... | ethernetCsmacd | down | yes | | 30 | Port 30 - ETH10/100/1000 | 30 | *** CPE Interface... | ethernetCsmacd | down | yes | | 31 | Port 31 - ETH10/100/1000 | 31 | *** CPE Interface... | ethernetCsmacd | down | yes | | 32 | Port 32 - ETH10/100/1000 | 32 | *** CPE Interface... | ethernetCsmacd | down | yes | | 33 | Port 33 - ETH10/100/1000 | 33 | *** CPE Interface... | ethernetCsmacd | down | yes | | 34 | Port 34 - ETH10/100/1000 | 34 | *** CPE Interface... | ethernetCsmacd | down | yes | | 35 | Port 35 - ETH10/100/1000 | 35 | *** CPE Interface... | ethernetCsmacd | down | yes | | 36 | Port 36 - ETH10/100/1000 | 36 | *** CPE Interface... | ethernetCsmacd | down | yes | | 37 | Port 37 - ETH10/100/1000 | 37 | *** CPE Interface... | ethernetCsmacd | down | yes | | 38 | Port 38 - ETH10/100/1000 | 38 | *** CPE Interface... | ethernetCsmacd | down | yes | | 39 | Port 39 - ETH10/100/1000 | 39 | *** CPE Interface... | ethernetCsmacd | down | yes | | 40 | Port 40 - ETH10/100/1000 | 40 | *** CPE Interface... | ethernetCsmacd | down | yes | | 41 | Port 41 - ETH1000/10000 | 41 | R362: *** Connect... | ethernetCsmacd | up | no | | 42 | Port 42 - ETH1000/10000 | 42 | R362: *** Connect... | ethernetCsmacd | up | no | | 43 | Port 43 - ETH1000/10000 | 43 | *** Connected to ... | ethernetCsmacd | down | yes | | 44 | Port 44 - ETH1000/10000 | 44 | *** Connected to ... | ethernetCsmacd | down | yes | | 45 | Port 45 - ETH1000/10000 | 45 | R362: *** Connect... | ethernetCsmacd | up | no | | 46 | Port 46 - ETH1000/10000 | 46 | *** Connected to ... | ethernetCsmacd | up | yes | | 47 | Port 47 - ETH1000/10000 | 47 | *** Connected to ... | ethernetCsmacd | down | yes | | 48 | Port 48 - ETH1000/10000 | 48 | *** Connected to ... | ethernetCsmacd | down | yes | | 49 | Port 49 - ETH1000/10000 | 49 | R362: *** Connect... | ethernetCsmacd | up | no | | 50 | Port 50 - ETH1000/10000 | 50 | *** Connected to ... | ethernetCsmacd | up | yes | | 51 | Port 51 - ETH1000/10000 | 51 | *** Connected to ... | ethernetCsmacd | down | yes | | 52 | Port 52 - ETH1000/10000 | 52 | *** Connected to ... | ethernetCsmacd | down | yes | +---------+--------------------------+--------+----------------------+----------------+-------------+---------+ Kind regards, Met vriendelijke groet, Peter Derissen Safariweg 25-31 Sr. OSS & Data Engineer 3605 MA Maarssen +31 611587110 The Netherlands [Logo]<https://www.eurofiber.com/en-nl> [Linkedin]<https://nl.linkedin.com/company/eurofiber> [Twitter]<https://twitter.com/Eurofiber> [Web]<https://www.eurofiber.com/en-nl> [Web] Please consider the environment before printing [cid:image007.jpg@01D9E556.F0B14D80]<https://www.eurofiber.com/> ******** IMPORTANT NOTICE ******** This e-mail (including any attachments) may contain information that is confidential or otherwise protected from disclosure and it is intended only for the addressees. If you are not the intended recipient, please note that any copying, distribution or other use of information contained in this e-mail (and its attachments) is not allowed. If you have received this e-mail in error, kindly notify us immediately by telephone or e-mail and delete the message (including any attachments) from your system. Please note that e-mail messages may contain computer viruses or other defects, may not be accurately replicated on other systems, or may be subject of unauthorized interception or other interference without the knowledge of sender or recipient. Eurofiber only sends and receives e-mails on the basis that Eurofiber is not responsible for any such computer viruses, corruption or other interference or any consequences thereof. Eurofiber Nederland B.V. is registered in the Chamber of Commerce of Amsterdam with number 34134377, VAT number NL 8088.51.524 B01. Eurofiber N.V. has its registered office at Belgicastraat 5 bus 7, 1930 Zaventem and is registered under national number 0435.204.851. Eurofiber France has its registered office at 21 Avenue de la Créativité, 59650 Villeneuve d’Ascq and is registered under national number FR 83.822.249.074.

2 1

General Question - Raritan PDUs
by Derek Johnson 14 Sep '23

14 Sep '23

I'm curious if anyone on the listserv is using a Raritan monitored-per-port PDU? If so, would you be willing to share your experience monitoring it with Observium? We're looking at buying some monitored + switched per-port models, and I want to make sure we can graph each port individually like we can with other vendors. I assume we can, but I figured it can't hurt to ping the community to see if others have any experience they're willing to share to confirm/deny my assumption. Thank you for any info you can offer! Derek Johnson Manager of Network Operations Fort Hays State University 415 Lyman Dr., TH175, Hays, KS 67601 (785) 628-5688 | dpjohnson(a)fhsu.edu<mailto:dpjohnson@fhsu.edu>

2 1

Custom OID troubleshooting
by Brad Bendy 11 Sep '23

11 Sep '23

Got a custom OID setup and graphing for a single device, nothing is showing up in the graphs but snmpget verifies the OID is correct. I think the text OID might be incorrect. Is there a debug log for this somewhere? This is the Professional edition. Thanks

2 1

Need help on migration
by Anthony Polselli 07 Sep '23

07 Sep '23

Hi all, Been using Observium for many years and it's been great. But finally trying to migrate it to a new server running Ubuntu 22 (from Ubuntu 14) and it's been a struggle. I've followed these steps (https://docs.observium.org/server-migration/) but I'm not a Ubuntu / MySQL tech. I built a new Ubuntu server, installed Observium with the script and was able to login. Now, after I restore the rrd files and MySQL DB, I can't login to the web interface. I setup debug and got this below. I tried adding a new user with adduser.php and it looks like it worked, but can't login still. Thanks! [cid:image003.png@01D9DDA5.27FB6730] Thanks, [cid:image001.png@01D9DDA4.47BF6180] __________________________________________ Anthony Polselli Chief Technology Officer Natural Networks, Inc. 7047 Carroll Rd. San Diego, CA 92121 anthony(a)naturalnetworks.com<mailto:anthony@naturalnetworks.com> http://www.naturalnetworks.com<http://www.naturalnetworks.com/> (619) 222-3232, ext: 101 office [cid:image002.png@01D9DDA4.47BF6180]

2 2

Out Of Office
by thomas.page＠neutralityms.com 01 Sep '23

01 Sep '23

Hi I am away currently with limited access to my inbox. Your message will not be forwarded. I will be back in the office on the 5th December If you are experiencing a fault on a live service, please contact nsc(a)neutralityms.com <mailto:nsc@neutralityms.com> Any help with ongoing delivery - please contact projects(a)neutralityms.com <mailto:projects@neutralityms.com> Thanks Tom

1 0

error on "Applications" in device settings
by Bryan Fields 01 Sep '23

01 Sep '23

I'm running 23.8.12912 (2nd August 2023), svn revision 12959 on Debian 12. This is the subscription version. When I go to edit a device and then the "Applications" tab I get an error of "Oops! Something went wrong." The below is a quote of the page with the detail errors: > Cannot increment array in /opt/observium/html/pages/device/edit/apps.inc.php:116 > #0: (unknown function) called at [/opt/observium/html/pages/device/edit/apps.inc.php:116] > 111: echo('<td class="text-center">' . generate_form_element($item) . '</td>'); > 112: //echo(" </td>"); > 113: echo(" <td>" . nicecase($app) . "</td>"); > 114: echo(" </tr>"); > 115: > 116: $row++; > 117: } > 118: } > 119: ?> > 120: </tbody> > 121: </table> > #1: include called at [/opt/observium/html/pages/device/edit.inc.php:119] > 114: $vars = get_vars('POST'); // Note, on edit pages use only method POST! > 115: $attribs = get_dev_attribs($device['device_id']); > 116: $model = get_model_array($device); > 117: > 118: register_html_resource('js', 'js/jquery.serializejson.js'); > 119: include($filename); > 120: } else { > 121: print_error('<h3>Page does not exist</h4> > 122: The requested page does not exist. Please correct the URL and try again.'); > 123: } > 124: > #2: include called at [/opt/observium/html/pages/device.inc.php:771] > 766: This device is being discovered now. Discovery started ' . format_unixtime($discovery_start) . ' (' . format_uptime(time() - $discovery_start) . ' ago).'); > 767: } > 768: } > 769: > 770: if (is_file($config['html_dir'] . "/pages/device/" . basename($tab) . ".inc.php")) { > 771: include($config['html_dir'] . "/pages/device/" . basename($tab) . ".inc.php"); > 772: } else { > 773: print_error('<h4>Tab does not exist</h4> > 774: The requested tab does not exist. Please correct the URL and try again.'); > 775: } > 776: > #3: include called at [/opt/observium/html/index.php:234] > 229: </div> > 230: </div> > 231: <div class="col-xl-8 col-lg-12">'; > 232: } > 233: > 234: include($page_file); > 235: echo '</div>'; > 236: } > 237: > 238: // Register default panel if custom not set > 239: if (!isset($GLOBALS['cache_html']['page_panel'])) { I checked the /opt/observium logs and didn't see anything that indicates the problem further. Does anyone know how to troubleshoot this or what this may be? Thanks, -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net

3 3